ramips: update device tree source files

[openwrt/openwrt.git] / target / linux / ramips / dts / FONERA20N.dts

diff --git a/target/linux/ramips/dts/FONERA20N.dts b/target/linux/ramips/dts/FONERA20N.dts
index 38007a7bc907c043e0afb71f7f636f24afa0c9e7..bc7474ccfb204e3c7f3fa8adaf97c80b6e7ec701 100644 (file)
--- a/target/linux/ramips/dts/FONERA20N.dts
+++ b/target/linux/ramips/dts/FONERA20N.dts
@@ -1,28 +1,17 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-       compatible = "FONERA20N", "ralink,rt3052-soc";
+       compatible = "fon,fonera20n", "ralink,rt3052-soc";
        model = "La Fonera 2.0N";
 
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
-               };
-
-       };
-
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -54,17 +43,20 @@
 
        gpio-leds {
                compatible = "gpio-leds";
+
                wifi {
                        label = "fonera20n:orange:wifi";
-                       gpios = <&gpio0 7 1>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
                };
+
                power {
                        label = "fonera20n:green:power";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
+
                usb {
                        label = "fonera20n:orange:usb";
-                       gpios = <&gpio0 14 1>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -73,58 +65,73 @@
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <20>;
+
                reset {
                        label = "reset";
-                       gpios = <&gpio0 12 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
+
                switch {
                        label = "switch";
-                       gpios = <&gpio0 13 1>;
-                       linux,code = <0x101>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RFKILL>;
+                       linux,input-type = <EV_SW>;
                };
        };
+};
 
-       ethernet@10100000 {
-               status = "okay";
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+                       ralink,function = "gpio";
+               };
        };
+};
 
-       esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x2f>;
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
 
-               port@0 {
-                       compatible = "swconfig,port";
-                       swconfig,segment = "lan";
-                       swconfig,portmap = <0 4>;
-               };
-               port@1 {
-                       compatible = "swconfig,port";
-                       swconfig,segment = "lan";
-                       swconfig,portmap = <1 3>;
-               };
-               port@2 {
-                       compatible = "swconfig,port";
-                       swconfig,segment = "lan";
-                       swconfig,portmap = <2 2>;
-               };
-               port@3 {
-                       compatible = "swconfig,port";
-                       swconfig,segment = "lan";
-                       swconfig,portmap = <3 1>;
-               };
-               port@4 {
-                       compatible = "swconfig,port";
-                       swconfig,segment = "wan";
-                       swconfig,portmap = <4 0>;
-               };
+&esw {
+       mediatek,portmap = <0x2f>;
+
+       port@0 {
+               compatible = "swconfig,port";
+               swconfig,segment = "lan";
+               swconfig,portmap = <0 4>;
        };
 
-       wmac@10180000 {
-               status = "okay";
+       port@1 {
+               compatible = "swconfig,port";
+               swconfig,segment = "lan";
+               swconfig,portmap = <1 3>;
        };
 
-       otg@101c0000 {
-               status = "okay";
+       port@2 {
+               compatible = "swconfig,port";
+               swconfig,segment = "lan";
+               swconfig,portmap = <2 2>;
        };
+
+       port@3 {
+               compatible = "swconfig,port";
+               swconfig,segment = "lan";
+               swconfig,portmap = <3 1>;
+       };
+
+       port@4 {
+               compatible = "swconfig,port";
+               swconfig,segment = "wan";
+               swconfig,portmap = <4 0>;
+       };
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+       status = "okay";
 };