ramips: Fix support for PBR-M1 board

[openwrt/openwrt.git] / target / linux / ramips / dts / FREESTATION5.dts

diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts
index 442cd268dde03ca1b12e644d7a07577055afb4f0..a6a74027745a11efe7111de4c8d51d7d4ba66859 100644 (file)
--- a/target/linux/ramips/dts/FREESTATION5.dts
+++ b/target/linux/ramips/dts/FREESTATION5.dts
@@ -10,22 +10,18 @@
                bootargs = "console=ttyS0,115200";
        };
 
-       palmbus@10000000 {
-               sysc@0 {
-                       ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-                       ralink,uartmux = "gpio";
-                       ralink,wdtmux = <1>;
-               };
-
-               gpio0: gpio@600 {
-                       status = "okay";
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
+                       };
                };
        };
 
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -56,48 +52,50 @@
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&factory 0x4>;
        };
 
        esw@10110000 {
-               status = "okay";
                ralink,portmap = <0x01>;
        };
 
        wmac@10180000 {
-               status = "okay";
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        otg@101c0000 {
                status = "okay";
        };
 
-       poe: gpio-regulator {
+       gpio-export {
+               compatible = "gpio-export";
+
                // Used to enable power-over-ethernet passthrough from port0 to port1.
                // Disable passthrough by default to prevent accidental equipment damage.
-               compatible = "regulator-gpio";
-
-               regulator-name = "poe-power";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-
-               enable-gpio = <&gpio0 12 0>;
+               poe {
+                       gpio-export,name = "poe-passthrough";
+                       gpio-export,output = <1>; // OUT_INIT_HIGH
+                       gpios = <&gpio0 11 1>;    // GPIO 11, ACTIVE_LOW
+               };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
+
                // The following leds are defined in the ArcOS firmware, but reportedly
                // not present in the Freestation5 device.
                wifi {
-                       label = "freestation:unknown:wifi";
+                       label = "freestation5:unknown:wifi";
                        gpios = <&gpio0 7 1>;
                };
+
                powerg {
-                       label = "freestation:unknown:powerg";
+                       label = "freestation5:unknown:powerg";
                        gpios = <&gpio0 9 1>;
                };
+
                usb {
-                       label = "freestation:unknown:usb";
+                       label = "freestation5:unknown:usb";
                        gpios = <&gpio0 14 1>;
                };
        };