ramips: Fix support for PBR-M1 board

[openwrt/openwrt.git] / target / linux / ramips / dts / FREESTATION5.dts

diff --git a/target/linux/ramips/dts/FREESTATION5.dts b/target/linux/ramips/dts/FREESTATION5.dts
index fb59498b209f382ca0eb5a6850273cb6f656fdd2..a6a74027745a11efe7111de4c8d51d7d4ba66859 100644 (file)
--- a/target/linux/ramips/dts/FREESTATION5.dts
+++ b/target/linux/ramips/dts/FREESTATION5.dts
@@ -3,21 +3,25 @@
 /include/ "rt3050.dtsi"
 
 / {
-       compatible = "FREESTATION5", "ralink,rt3052-soc";
+       compatible = "FREESTATION5", "ralink,rt3050-soc";
        model = "ARC FreeStation5";
 
-       memorydetect {
-               ralink,memory = <0x0 0x200000 0x4000000>;
-       };
-
        chosen {
                bootargs = "console=ttyS0,115200";
        };
 
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -48,19 +52,51 @@
        };
 
        ethernet@10100000 {
-               status = "okay";
+               mtd-mac-address = <&factory 0x4>;
        };
 
        esw@10110000 {
-               status = "okay";
-               ralink,portmap = <0x3e>;
+               ralink,portmap = <0x01>;
        };
 
        wmac@10180000 {
-               status = "okay";
+               ralink,mtd-eeprom = <&factory 0>;
        };
 
        otg@101c0000 {
                status = "okay";
        };
+
+       gpio-export {
+               compatible = "gpio-export";
+
+               // Used to enable power-over-ethernet passthrough from port0 to port1.
+               // Disable passthrough by default to prevent accidental equipment damage.
+               poe {
+                       gpio-export,name = "poe-passthrough";
+                       gpio-export,output = <1>; // OUT_INIT_HIGH
+                       gpios = <&gpio0 11 1>;    // GPIO 11, ACTIVE_LOW
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               // The following leds are defined in the ArcOS firmware, but reportedly
+               // not present in the Freestation5 device.
+               wifi {
+                       label = "freestation5:unknown:wifi";
+                       gpios = <&gpio0 7 1>;
+               };
+
+               powerg {
+                       label = "freestation5:unknown:powerg";
+                       gpios = <&gpio0 9 1>;
+               };
+
+               usb {
+                       label = "freestation5:unknown:usb";
+                       gpios = <&gpio0 14 1>;
+               };
+       };
 };