ramips: set rt2880 pci controller of_node

[openwrt/openwrt.git] / target / linux / ramips / dts / GB-PC2.dts

diff --git a/target/linux/ramips/dts/GB-PC2.dts b/target/linux/ramips/dts/GB-PC2.dts
index 0576aa0a8bd7692b6bee7ce659089860e7bd34a3..1e7f3b2ea42fa8d802b943724ccd203739aeca20 100644 (file)
--- a/target/linux/ramips/dts/GB-PC2.dts
+++ b/target/linux/ramips/dts/GB-PC2.dts
@@ -24,8 +24,6 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
@@ -67,49 +65,49 @@
                        label = "gb-pc2:green:lan3";
                        gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
                };
-
        };
 };
 
 &sdhci {
        status = "okay";
-
-       pinctrl-names = "default";
-       pinctrl-0 = <&sdhci_pins>;
 };
 
 &spi0 {
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x1fb0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x1fb0000>;
+                       };
                };
        };
 };