#include "mt7620a.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
- compatible = "GL-MT750", "ralink,mt7620a-soc";
+ compatible = "glinet,gl-mt750", "ralink,mt7620a-soc";
model = "GL-MT750";
chosen {
wan {
label = "gl-mt750:wan";
- gpios = <&gpio2 0 1>;
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
};
lan {
label = "gl-mt750:lan";
- gpios = <&gpio2 1 1>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
};
wlan {
label = "gl-mt750:wlan";
- gpios = <&gpio3 0 1>;
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
};
};
poll-interval = <20>;
reset {
label = "reset";
- gpios = <&gpio0 13 1>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
BTN_0 {
label = "BTN_0";
- gpios = <&gpio2 2 1>;
+ gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
BTN_1 {
label = "BTN_1";
- gpios = <&gpio2 3 1>;
+ gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
};
};
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "w25q128";
+ compatible = "jedec,spi-nor";
reg = <0>;
- linux,modalias = "m25p80", "w25q128";
spi-max-frequency = <10000000>;
partition@0 {
};
ðernet {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4000>;
- ralink,port-map = "llllw";
+ mediatek,portmap = "llllw";
};
&wmac {
&pcie {
status = "okay";
+};
- pcie-bridge {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
};
};