ramips: Use dts alias based status led

[openwrt/openwrt.git] / target / linux / ramips / dts / MZK-W300NH2.dts

diff --git a/target/linux/ramips/dts/MZK-W300NH2.dts b/target/linux/ramips/dts/MZK-W300NH2.dts
index 987d6a7c0d247430a1d204a5bb31b360ce15f970..558450c07da6a779dfb00663e33e856832038f3b 100644 (file)
--- a/target/linux/ramips/dts/MZK-W300NH2.dts
+++ b/target/linux/ramips/dts/MZK-W300NH2.dts
@@ -2,10 +2,17 @@
 
 #include "rt3050.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "MZK-W300NH2", "ralink,rt3052-soc";
+       compatible = "planex,mzk-w300nh2", "ralink,rt3052-soc";
        model = "Planex MZK-W300NH2";
 
+       aliases {
+               led-status = &led_power;
+       };
+
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
@@ -47,19 +54,19 @@
        gpio-leds {
                compatible = "gpio-leds";
 
-               power {
+               led_power: power {
                        label = "mzk-w300nh2:green:power";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
                        label = "mzk-w300nh2:amber:wlan";
-                       gpios = <&gpio0 14 1>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                wps {
                        label = "mzk-w300nh2:amber:wps";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -71,20 +78,20 @@
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 12 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                rt {
                        label = "rt";
-                       gpios = <&gpio0 13 1>;
-                       linux,code = <0x100>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
        };
 };