ramips: Use dts alias based status led

[openwrt/openwrt.git] / target / linux / ramips / dts / RB750Gr3.dts

diff --git a/target/linux/ramips/dts/RB750Gr3.dts b/target/linux/ramips/dts/RB750Gr3.dts
index d39a2d113b4cabeb61647addfc30640c0ae68392..563a5372688dcf50998a131c9a399140b5d9155f 100644 (file)
--- a/target/linux/ramips/dts/RB750Gr3.dts
+++ b/target/linux/ramips/dts/RB750Gr3.dts
@@ -1,13 +1,18 @@
 /dts-v1/;
 
 #include "mt7621.dtsi"
+
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-       compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+       compatible = "mikrotik,rb750gr3", "mediatek,mt7621-soc";
        model = "MikroTik RB750Gr3";
 
+       aliases {
+               led-status = &led_pwr;
+       };
+
        memory@0 {
                device_type = "memory";
                reg = <0x0 0x10000000>;
@@ -20,6 +25,11 @@
        gpio-leds {
                compatible = "gpio-leds";
 
+               led_pwr: pwr {
+                       label = "rb750gr3:blue:pwr";
+                       gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+               };
+
                usr {
                        label = "rb750gr3:green:usr";
                        gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
@@ -49,6 +59,12 @@
                compatible = "gpio-export";
                #size-cells = <0>;
 
+               buzzer {
+                       gpio-export,name = "buzzer";
+                       gpio-export,output = <0>;
+                       gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+               };
+
                usb {
                        gpio-export,name = "usb";
                        gpio-export,output = <1>;
@@ -65,8 +81,8 @@
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80";
                spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
 
                partition@0 {
                        label = "u-boot";
@@ -102,7 +118,7 @@
 &pinctrl {
        state_default: pinctrl0 {
                gpio {
-                       ralink,group = "i2c", "rgmii2", "sdhci";
+                       ralink,group = "i2c", "uart2", "uart3", "pcie", "rgmii2", "jtag";
                        ralink,function = "gpio";
                };
        };
@@ -111,11 +127,3 @@
 &sdhci {
        status = "okay";
 };
-
-&xhci {
-       status = "okay";
-};
-
-&pcie {
-       status = "disabled";
-};