ramips: add LinkIt Smart7688 support

[openwrt/openwrt.git] / target / linux / ramips / dts / RT-N15.dts

diff --git a/target/linux/ramips/dts/RT-N15.dts b/target/linux/ramips/dts/RT-N15.dts
index 893652055fe7153794b1e3bc1b236db200255617..03821cac862780e6a54165939cb42de521c1691b 100644 (file)
--- a/target/linux/ramips/dts/RT-N15.dts
+++ b/target/linux/ramips/dts/RT-N15.dts
@@ -26,7 +26,6 @@
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
-
                bank-width = <2>;
                device-width = <2>;
                #address-cells = <1>;
@@ -37,16 +36,19 @@
                        reg = <0x0 0x30000>;
                        read-only;
                };
+
                partition@30000 {
                        label = "uboot-env";
                        reg = <0x30000 0x10000>;
                        read-only;
                };
+
                factory: partition@40000 {
                        label = "factory";
                        reg = <0x40000 0x10000>;
                        read-only;
                };
+
                partition@50000 {
                        label = "firmware";
                        reg = <0x50000 0x3b0000>;
@@ -57,12 +59,13 @@
                status = "okay";
                mtd-mac-address = <&factory 0x4>;
 
-                port@0 {
+               port@0 {
                        ralink,fixed-link = <1000 1 1 1>;
                };
 
                mdio-bus {
                        status = "okay";
+
                        phy0: ethernet-phy@0 {
                                phy-mode = "mii";
                                reg = <0>;
@@ -76,16 +79,22 @@
                gpio-sck = <&gpio0 2 0>;
        };
 
+       wmac@480000 {
+               ralink,mtd-eeprom = <&factory 0>;
+       };
+
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <100>;
+
                wps {
                        label = "wps";
                        gpios = <&gpio0 0 0>;
                        linux,code = <0x211>;
                };
+
                reset {
                        label = "reset";
                        gpios = <&gpio0 12 0>;