/dts-v1/;
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "RT-N15", "ralink,rt2880-soc";
+ compatible = "asus,rt-n15", "ralink,rt2880-soc";
model = "Asus RT-N15";
- palmbus@300000 {
- gpio0: gpio@600 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartlite", "mdio";
- ralink,function = "gpio";
- };
- };
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
};
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
-
bank-width = <2>;
device-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "uboot";
- reg = <0x0 0x30000>;
- read-only;
- };
- partition@30000 {
- label = "uboot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x3b0000>;
- };
- };
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- ethernet@400000 {
- status = "okay";
- mtd-mac-address = <&factory 0x4>;
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
- port@0 {
- ralink,fixed-link = <1000 1 1 1>;
- };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
- mdio-bus {
- status = "okay";
- phy0: ethernet-phy@0 {
- phy-mode = "mii";
- reg = <0>;
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x3b0000>;
};
};
};
rtl8366s {
compatible = "realtek,rtl8366s";
- gpio-sda = <&gpio0 1 0>;
- gpio-sck = <&gpio0 2 0>;
+ gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
};
- gpio-keys-polled {
+ keys {
compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
poll-interval = <100>;
+
wps {
label = "wps";
- gpios = <&gpio0 0 0>;
- linux,code = <0x211>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WPS_BUTTON>;
};
+
reset {
label = "reset";
- gpios = <&gpio0 12 0>;
- linux,code = <0x198>;
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_RESTART>;
};
};
- gpio-leds {
+ leds {
compatible = "gpio-leds";
- power {
+ led_power: power {
label = "rt-n15:blue:power";
- gpios = <&gpio0 11 1>;
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartlite", "mdio";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+ðernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x4>;
+
+ port@0 {
+ mediatek,fixed-link = <1000 1 1 1>;
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
};
};
};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0>;
+};