#include "mt7621.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
/ {
- compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+ compatible = "storylink,sap-g3200u3", "mediatek,mt7621-soc";
model = "STORYLiNK SAP-G3200U3";
memory@0 {
bootargs = "console=ttyS0,57600";
};
- palmbus@1E000000 {
- spi@b00 {
- status = "okay";
-
- m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "jedec,spi-nor";
- reg = <0 0>;
- linux,modalias = "m25p80", "en25q64";
- spi-max-frequency = <10000000>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x1000>;
- read-only;
- };
-
- partition@31000 {
- label = "config";
- reg = <0x31000 0xf000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- label = "firmware";
- reg = <0x50000 0x7b0000>;
- };
- };
- };
- };
-
- pcie@1e140000 {
- status = "okay";
-
- pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x8000>;
- mediatek,2ghz = <0>;
- };
- };
-
- pcie1 {
- mt76@1,0 {
- reg = <0x0000 0 0 0 0>;
- device_type = "pci";
- mediatek,mtd-eeprom = <&factory 0x0000>;
- mediatek,5ghz = <0>;
- };
- };
- };
-
- ethernet@1e100000 {
- mtd-mac-address = <&factory 0xe006>;
- };
-
gpio-leds {
compatible = "gpio-leds";
usb {
label = "sap-g3200u3:green:usb";
- gpios = <&gpio0 13 1>;
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
};
reset {
label = "reset";
- gpios = <&gpio0 16 1>;
- linux,code = <0x198>;
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
- gpios = <&gpio0 14 1>;
- linux,code = <0xf7>;
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
};
};
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x1000>;
+ read-only;
+ };
+
+ partition@31000 {
+ label = "config";
+ reg = <0x31000 0xf000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+ };
+
+ pcie1 {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ };
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xe006>;
+};
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "uart3", "jtag";
- ralink,function = "gpio";
- };
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "uart3", "jtag";
+ ralink,function = "gpio";
};
};
};