ramips: set F5D8235 v1 usb led trigger via devicetree

[openwrt/openwrt.git] / target / linux / ramips / dts / UR-326N4G.dts

diff --git a/target/linux/ramips/dts/UR-326N4G.dts b/target/linux/ramips/dts/UR-326N4G.dts
index d90d77c0611cbc034ba74e87eaf74d88bfcef068..367b5383840f592420127cea79e62194664b4208 100644 (file)
--- a/target/linux/ramips/dts/UR-326N4G.dts
+++ b/target/linux/ramips/dts/UR-326N4G.dts
@@ -2,39 +2,50 @@
 
 #include "rt3050.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "UR-326N4G", "ralink,rt3052-soc";
+       compatible = "upvel,ur-326n4g", "ralink,rt3052-soc";
        model = "UPVEL UR-326N4G";
 
+       aliases {
+               led-status = &led_wps;
+       };
+
        cfi@1f000000 {
                compatible = "cfi-flash";
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
 
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
                };
        };
 
@@ -43,46 +54,44 @@
 
                3g {
                        label = "ur-326n4g:green:3g";
-                       gpios = <&gpio0 9 1>;
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                gateway {
                        label = "ur-326n4g:green:gateway";
-                       gpios = <&gpio0 11 1>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                ap {
                        label = "ur-326n4g:green:ap";
-                       gpios = <&gpio0 12 1>;
+                       gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
-               wps {
+               led_wps: wps {
                        label = "ur-326n4g:green:wps";
-                       gpios = <&gpio0 14 1>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                station {
                        label = "ur-326n4g:green:station";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset_wps {
                        label = "reset_wps";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                mode {
                        label = "mode";
-                       gpios = <&gpio0 7 1>;
-                       linux,code = <0x32>;
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
                };
        };
 };