ramips: drop m25p,chunked-io from dts

[openwrt/openwrt.git] / target / linux / ramips / dts / W2914NSV2.dtsi

diff --git a/target/linux/ramips/dts/W2914NSV2.dtsi b/target/linux/ramips/dts/W2914NSV2.dtsi
index c842b0099b305db4920f69b93dab1acd72a91abb..63cff0c10d886bb56d3817d859cdd0af5e0cecd1 100644 (file)
--- a/target/linux/ramips/dts/W2914NSV2.dtsi
+++ b/target/linux/ramips/dts/W2914NSV2.dtsi
@@ -4,14 +4,14 @@
 #include <dt-bindings/input/input.h>
 
 / {
+       compatible = "wevo,w2914ns-v2", "mediatek,mt7621-soc";
+
        chosen {
                bootargs = "console=ttyS0,57600";
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
@@ -26,20 +26,6 @@
                        linux,code = <KEY_WPS_BUTTON>;
                };
        };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               // Only USB LED is connected to GPIO.
-               // All of other LEDs are connected directly to
-               // switch, WiFi chip, Vcc, so they are not controllable
-               // via GPIO
-
-               usb {
-                       label = "w2914nsv2:green:usb";
-                       gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
-               };
-       };
 };
 
 &xhci {
@@ -50,56 +36,60 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0xfb0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0xfb0000>;
+                       };
                };
        };
 };
 
 &pcie {
        status = "okay";
+};
 
-       pcie0 {
-               wifi@14c3,7662 {
-                       compatible = "pci14c3,7662";
-                       reg = <0x0000 0 0 0 0>;
-                       mediatek,mtd-eeprom = <&factory 0x0000>;
-                       mediatek,5ghz = <0>;
-               };
+&pcie0 {
+       wifi@0,0 {
+               compatible = "pci14c3,7603";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
        };
+};
 
-       pcie1 {
-               wifi@14c3,7603 {
-                       compatible = "pci14c3,7603";
-                       reg = <0x0000 0 0 0 0>;
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-                       mediatek,2ghz = <0>;
-               };
+&pcie1 {
+       wifi@0,0 {
+               compatible = "pci14c3,7662";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
        };
 };