ramips: set rt2880 pci controller of_node
[openwrt/openwrt.git] / target / linux / ramips / dts / WNDR3700V5.dts
index ce964403697cfaced621df3d5a1a9df28137bda2..3d3fde997ec4edcdabfb9f7b2147bcdc23cf0ebe 100644 (file)
@@ -9,6 +9,10 @@
        compatible = "netgear,wndr3700-v5", "mediatek,mt7621-soc";
        model = "Netgear WNDR3700v5";
 
+       aliases {
+               led-status = &led_power;
+       };
+
        memory@0 {
                device_type = "memory";
                reg = <0x0 0x8000000>;
@@ -26,7 +30,7 @@
                        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
-               power {
+               led_power: power {
                        label = "wndr3700v5:green:power";
                        gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
                };
@@ -34,8 +38,6 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                wps {
        status = "okay";
 
        mx25l12805d@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
                m25p,chunked-io = <32>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@f30000 {
-                       label = "factory";
-                       reg = <0xf30000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0xee0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@f30000 {
+                               label = "factory";
+                               reg = <0xf30000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xee0000>;
+                       };
                };
        };
 };
 
 &pcie {
        status = "okay";
+};
 
-       pcie0 {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-                       ieee80211-freq-limit = <5000000 6000000>;
-               };
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
        };
+};
 
-       pcie1 {
-               mt76@1,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x0000>;
-               };
+&pcie1 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
        };
 };
 
 &pinctrl {
        state_default: pinctrl0 {
                gpio {
-                       ralink,group =  "rgmii2", "mdio", "wdt";
+                       ralink,group = "rgmii2", "mdio", "wdt";
                        ralink,function = "gpio";
                };
        };