ramips: set F5D8235 v1 usb led trigger via devicetree

[openwrt/openwrt.git] / target / linux / ramips / dts / WR6202.dts

diff --git a/target/linux/ramips/dts/WR6202.dts b/target/linux/ramips/dts/WR6202.dts
index 49f934d40c65690a17f2dc31137c58db200a5b0f..915f63842c4c2f057c53c16ead92a4b28789f320 100644 (file)
--- a/target/linux/ramips/dts/WR6202.dts
+++ b/target/linux/ramips/dts/WR6202.dts
@@ -2,53 +2,45 @@
 
 #include "rt3050.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "WR6202", "ralink,rt3052-soc";
+       compatible = "accton,wr6202", "ralink,rt3052-soc";
        model = "AWB WR6202";
 
        chosen {
                bootargs = "console=ttyS0,115200";
        };
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
-                               ralink,function = "gpio";
-                       };
-               };
-       };
-
        gpio-leds {
                compatible = "gpio-leds";
 
                wps {
                        label = "wr6202:blue:wps";
-                       gpios = <&gpio0 14 1>;
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                3g {
                        label = "wr6202:blue:3g";
-                       gpios = <&gpio0 13 1>;
+                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
        };
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 10 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
 
                wps {
                        label = "wps";
-                       gpios = <&gpio0 0 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
        };
 
@@ -57,47 +49,35 @@
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
 
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
 
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x7b0000>;
-               };
-       };
-
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x28>;
-       };
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
 
-       esw@10110000 {
-               mediatek,portmap = <0x3e>;
-       };
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
 
-       wmac@10180000 {
-               ralink,mtd-eeprom = <&factory 0>;
-       };
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
 
-       otg@101c0000 {
-               status = "okay";
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x7b0000>;
+                       };
+               };
        };
 
        gpio_export {
@@ -107,7 +87,32 @@
                usb {
                        gpio-export,name = "usb";
                        gpio-export,output = <0>;
-                       gpios = <&gpio0 11 0>;
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+                       ralink,function = "gpio";
                };
        };
 };
+
+&ethernet {
+       mtd-mac-address = <&factory 0x28>;
+};
+
+&esw {
+       mediatek,portmap = <0x3e>;
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+       status = "okay";
+};