ramips: DTS rework

[openwrt/openwrt.git] / target / linux / ramips / dts / WRTNODE2.dtsi

diff --git a/target/linux/ramips/dts/WRTNODE2.dtsi b/target/linux/ramips/dts/WRTNODE2.dtsi
index 118cfe9671823901dd7188374961ba2886317010..ae7f232fc378cccc4adfc6c5b6459b007c92474a 100644 (file)
--- a/target/linux/ramips/dts/WRTNODE2.dtsi
+++ b/target/linux/ramips/dts/WRTNODE2.dtsi
@@ -5,89 +5,83 @@
                bootargs = "console=ttyS0,115200";
        };
 
-       palmbus@10000000 {
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               spi-max-frequency = <10000000>;
-                               m25p,chunked-io = <32>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0x1fb0000>;
-                               };
-                       };
-
-
-                       spidev@1 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "spidev";
-                               reg = <1 0>;
-                               linux,modalias = "spidev", "spidev";
-                               spi-max-frequency = <10000000>;
-                       };
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 5 1>;
+                       linux,code = <0x198>;
                };
+       };
+};
 
-               uart1@d00 {
-                       status = "okay";
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0 0>;
+               spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
                };
 
-               i2c@900 {
-                       status = "okay";
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
                };
 
-       };
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
 
-       ethernet@10100000 {
-               mtd-mac-address = <&factory 0x4>;
-               ralink,port-map = "llllw";
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0x1fb0000>;
+               };
        };
 
-       sdhci@10130000 {
-               status = "okay";
+       spidev@1 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "spidev";
+               reg = <1 0>;
+               linux,modalias = "spidev", "spidev";
+               spi-max-frequency = <10000000>;
        };
+};
 
-       pcie@10140000 {
-               status = "okay";
-       };
+&uart1 {
+       status = "okay";
+};
 
+&i2c {
+       status = "okay";
+};
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
+&ethernet {
+       mtd-mac-address = <&factory 0x4>;
+       ralink,port-map = "llllw";
+};
 
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 5 1>;
-                       linux,code = <0x198>;
-               };
-       };
+&sdhci {
+       status = "okay";
+};
 
+&pcie {
+       status = "okay";
 };