ramips: fix Youku-YK1 support

[openwrt/openwrt.git] / target / linux / ramips / dts / YOUKU-YK1.dts

diff --git a/target/linux/ramips/dts/YOUKU-YK1.dts b/target/linux/ramips/dts/YOUKU-YK1.dts
index 1746f6c674ac46f3399417ef0971d90d16752ba2..8a0e0819ecf0b88d13d701493dadd0d314608846 100644 (file)
--- a/target/linux/ramips/dts/YOUKU-YK1.dts
+++ b/target/linux/ramips/dts/YOUKU-YK1.dts
@@ -2,29 +2,30 @@
 
 #include "mt7620a.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
 / {
-       compatible = "YOUKU-YK1", "ralink,mt7620a-soc";
+       compatible = "youku,yk1", "ralink,mt7620a-soc";
        model = "YOUKU YK1";
 
        gpio-leds {
                compatible = "gpio-leds";
                wan {
                        label = "youku-yk1:blue:wan";
-                       gpios = <&gpio2 4 1>;
+                       gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
                };
                air {
                        label = "youku-yk1:blue:air";
-                       gpios = <&gpio3 0 1>;
+                       gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
                usb {
                        label = "youku-yk1:blue:usb";
-                       gpios = <&gpio1 11 1>;
+                       gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
                };
                power {
                        label = "youku-yk1:blue:power";
-                       gpios = <&gpio1 5 1>;
+                       gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
                };
        };
 
@@ -35,7 +36,7 @@
                poll-interval = <20>;
                reset {
                        label = "reset";
-                       gpios = <&gpio0 1 1>;
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -65,7 +66,6 @@
                #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
-               linux,modalias = "m25p80", "w25q256";
                spi-max-frequency = <10000000>;
 
                partition@0 {
@@ -96,7 +96,7 @@
 &pinctrl {
        state_default: pinctrl0 {
                default {
-                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+                       ralink,group = "i2c", "rgmii1", "ephy", "wled";
                        ralink,function = "gpio";
                };
        };
@@ -104,7 +104,6 @@
 
 &ethernet {
        pinctrl-names = "default";
-       pinctrl-0 = <&ephy_pins>;
        mtd-mac-address = <&factory 0x4>;
        mediatek,portmap = "llllw";
 };