ramips: set F5D8235 v1 usb led trigger via devicetree

[openwrt/openwrt.git] / target / linux / ramips / dts / ZBT-WG2626.dts

diff --git a/target/linux/ramips/dts/ZBT-WG2626.dts b/target/linux/ramips/dts/ZBT-WG2626.dts
index bab483a8d0bd607cf7fb6c3e342b0ba3611f32f1..469977bb4525dd63a0aa46375b14197906c79dd9 100644 (file)
--- a/target/linux/ramips/dts/ZBT-WG2626.dts
+++ b/target/linux/ramips/dts/ZBT-WG2626.dts
@@ -2,126 +2,126 @@
 
 #include "mt7621.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
-       compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+       compatible = "zbtlink,zbt-wg2626", "mediatek,mt7621-soc";
        model = "ZBT-WG2626";
 
+       aliases {
+               led-status = &led_status;
+       };
+
        memory@0 {
                device_type = "memory";
                reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
        };
 
        chosen {
-               bootargs = "console=ttyS0,57600";
+               bootargs = "console=ttyS0,115200";
        };
 
-       sdhci@10130000 {
-               status = "okay";
-       };
-
-       palmbus@1E000000 {
-               spi@b00 {
-                       status = "okay";
-
-                       m25p80@0 {
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               compatible = "jedec,spi-nor";
-                               reg = <0 0>;
-                               linux,modalias = "m25p80";
-                               spi-max-frequency = <10000000>;
-
-                               partition@0 {
-                                       label = "u-boot";
-                                       reg = <0x0 0x30000>;
-                                       read-only;
-                               };
-
-                               partition@30000 {
-                                       label = "u-boot-env";
-                                       reg = <0x30000 0x10000>;
-                                       read-only;
-                               };
-
-                               factory: partition@40000 {
-                                       label = "factory";
-                                       reg = <0x40000 0x10000>;
-                                       read-only;
-                               };
-
-                               partition@50000 {
-                                       label = "firmware";
-                                       reg = <0x50000 0xfb0000>;
-                               };
-
-                       };
-               };
-
+       palmbus: palmbus@1E000000 {
                i2c@900 {
-                       compatible = "ralink,i2c-mt7621";
-                       reg = <0x900 0x100>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c_pins>;
                        status = "okay";
                };
        };
 
-       pcie@1e140000 {
-               status = "okay";
-
-               pcie0 {
-                       mt76@0,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x8000>;
-                               mediatek,2ghz = <0>;
-                       };
-               };
-
-               pcie1 {
-                       mt76@1,0 {
-                               reg = <0x0000 0 0 0 0>;
-                               device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x0000>;
-                               mediatek,5ghz = <0>;
-                       };
-               };
-       };
-
-       ethernet@1e100000 {
-               mtd-mac-address = <&factory 0xe000>;
-       };
-
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
                        label = "reset";
-                       gpios = <&gpio0 18 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 
        gpio-leds {
                compatible = "gpio-leds";
 
-               status {
+               led_status: status {
                        label = "zbt-wg2626:green:status";
-                       gpios = <&gpio0 24 1>;
+                       gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
                };
        };
+};
+
+&sdhci {
+       status = "okay";
+};
 
-       pinctrl {
-               state_default: pinctrl0 {
-                       gpio {
-                               ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
-                               ralink,function = "gpio";
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
                        };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0xfb0000>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
+       };
+};
+
+&pcie1 {
+       mt76@0,0 {
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
+               ieee80211-freq-limit = <2400000 2500000>;
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&factory 0xe000>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "wdt", "rgmii2", "jtag", "mdio";
+                       ralink,function = "gpio";
                };
        };
 };