ramips: enable external amplifier for D-Link DIR-810L

[openwrt/openwrt.git] / target / linux / ramips / dts / ZBT-WG3526.dtsi

diff --git a/target/linux/ramips/dts/ZBT-WG3526.dtsi b/target/linux/ramips/dts/ZBT-WG3526.dtsi
index 5e195fb8120d3a66f19acf83c9f76bb4b1ec3e7e..0cf94d57d26f96531f1b6887a05506547fecf961 100644 (file)
--- a/target/linux/ramips/dts/ZBT-WG3526.dtsi
+++ b/target/linux/ramips/dts/ZBT-WG3526.dtsi
@@ -4,6 +4,15 @@
 #include <dt-bindings/input/input.h>
 
 / {
+       compatible = "zbtlink,zbt-wg3526", "mediatek,mt7621-soc";
+
+       aliases {
+               led-boot = &led_status;
+               led-failsafe = &led_status;
+               led-running = &led_status;
+               led-upgrade = &led_status;
+       };
+
        memory@0 {
                device_type = "memory";
                reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
@@ -19,10 +28,8 @@
                };
        };
 
-       gpio-keys-polled {
+       keys {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {
@@ -32,12 +39,12 @@
                };
        };
 
-       gpio-leds {
+       leds {
                compatible = "gpio-leds";
 
-               status {
+               led_status: status {
                        label = "zbt-wg3526:green:status";
-                       gpios = <&gpio0 24 1>;
+                       gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
                };
        };
 };
@@ -50,54 +57,62 @@
        status = "okay";
 
        m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
-               m25p,chunked-io = <32>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
 
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               firmware: partition@50000 {
-                       label = "firmware";
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       firmware: partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                       };
                };
        };
 };
 
 &pcie {
        status = "okay";
+};
 
-       pcie0 {
-               wifi@14c3,7603 {
-                       compatible = "pci14c3,7603";
-                       reg = <0x0000 0 0 0 0>;
-                       mediatek,mtd-eeprom = <&factory 0x0000>;
-               };
+&pcie0 {
+       wifi@0,0 {
+               compatible = "pci14c3,7603";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0000>;
        };
+};
+
+&pcie1 {
+       wifi@0,0 {
+               compatible = "pci14c3,7662";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x8000>;
+               ieee80211-freq-limit = <5000000 6000000>;
 
-       pcie1 {
-               wifi@14c3,7662 {
-                       compatible = "pci14c3,7662";
-                       reg = <0x0000 0 0 0 0>;
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-                       ieee80211-freq-limit = <5000000 6000000>;
+               led {
+                       led-sources = <2>;
                };
        };
 };
@@ -109,7 +124,7 @@
 &pinctrl {
        state_default: pinctrl0 {
                gpio {
-                       ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+                       ralink,group = "wdt", "rgmii2", "jtag", "mdio";
                        ralink,function = "gpio";
                };
        };