ramips: add support for D-Link DWR-118-A2

[openwrt/openwrt.git] / target / linux / ramips / dts / kn.dts

diff --git a/target/linux/ramips/dts/kn.dts b/target/linux/ramips/dts/kn.dts
index e31d38e54e07a183bc8c9509d25228f8b11f73d2..eccd52a992efcfe83b0eef01e46ae989d2a54a8d 100644 (file)
--- a/target/linux/ramips/dts/kn.dts
+++ b/target/linux/ramips/dts/kn.dts
@@ -18,30 +18,34 @@
                reg = <0x1f000000 0x800000>;
                bank-width = <2>;
                device-width = <2>;
-               #address-cells = <1>;
-               #size-cells = <1>;
 
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0x3b0000>;
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               label = "firmware";
+                               reg = <0x50000 0x3b0000>;
+                       };
                };
        };
 
@@ -66,8 +70,6 @@
 
        gpio-keys-polled {
                compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
                poll-interval = <20>;
 
                reset {