-/dts-v1/;
-
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7620a_phicomm_k2x.dtsi"
/ {
compatible = "phicomm,k2g", "ralink,mt7620a-soc";
model = "Phicomm K2G";
-
- aliases {
- led-boot = &led_blue;
- led-failsafe = &led_blue;
- led-running = &led_blue;
- led-upgrade = &led_blue;
- serial0 = &uartlite;
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_blue: blue {
- label = "k2g:blue:status";
- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
- };
-
- yellow {
- label = "k2g:yellow:status";
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- red {
- label = "k2g:red:status";
- gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
};
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <24000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- reg = <0x0 0x30000>;
- label = "u-boot";
- read-only;
- };
-
- partition@30000 {
- reg = <0x30000 0x10000>;
- label = "u-boot-env";
- read-only;
- };
-
- factory: partition@40000 {
- reg = <0x40000 0x10000>;
- label = "factory";
- read-only;
- };
-
- partition@50000 {
- reg = <0x50000 0x50000>;
- label = "permanent_config";
- read-only;
- };
-
- partition@a0000 {
- compatible = "denx,uimage";
- reg = <0xa0000 0x760000>;
- label = "firmware";
- };
- };
+&partitions {
+ partition@50000 {
+ reg = <0x50000 0x50000>;
+ label = "permanent_config";
+ read-only;
};
-};
-&pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "i2c", "uartf";
- ralink,function = "gpio";
- };
+ partition@a0000 {
+ compatible = "denx,uimage";
+ reg = <0xa0000 0x760000>;
+ label = "firmware";
};
};
ðernet {
pinctrl-names = "default";
pinctrl-0 = <&rgmii2_pins &mdio_pins>;
- mtd-mac-address = <&factory 0x28>;
+
mediatek,portmap = "llllw";
port@5 {
};
};
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
&wmac {
- ralink,mtd-eeprom = <&factory 0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "pa_gpio";
pinctrl-0 = <&pa_pins>;
+ pinctrl-1 = <&pa_gpio_pins>;
};