ramips: use DT trigger for 2G WiFi on ASUS RT-AC51U

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_tplink_archer-c20i.dts

diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts b/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts
index 1da2f483dc2229e9b530d316528f762be928c902..b1cde57d773f362b0a7da627a647a39d32111a88 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts
+++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts
@@ -1,16 +1,17 @@
 /dts-v1/;
 
-#include "mt7620a.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7620a_tplink_archer.dtsi"
 
 / {
        compatible = "tplink,archer-c20i", "ralink,mt7620a-soc";
        model = "TP-Link Archer C20i";
 
-       chosen {
-               bootargs = "console=ttyS0,115200";
+       aliases {
+               led-boot = &led_wps;
+               led-failsafe = &led_wps;
+               led-running = &led_wps;
+               led-upgrade = &led_wps;
+               label-mac-device = &ethernet;
        };
 
        leds {
@@ -28,7 +29,7 @@
                        linux,default-trigger = "usbport";
                };
 
-               wps {
+               led_wps: wps {
                        label = "archer-c20i:blue:wps";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
@@ -41,125 +42,23 @@
                wlan {
                        label = "archer-c20i:blue:wlan";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               rfkill {
-                       label = "rfkill";
-                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-
-               reset_wps {
-                       label = "reset_wps";
-                       gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
+                       linux,default-trigger = "phy1tpt";
                };
        };
 };
 
-&gpio1 {
-       status = "okay";
-};
-
-&gpio2 {
-       status = "okay";
-};
-
-&gpio3 {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x20000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               compatible = "tplink,firmware";
-                               label = "firmware";
-                               reg = <0x20000 0x7a0000>;
-                       };
-
-                       partition@7c0000 {
-                               label = "config";
-                               reg = <0x7c0000 0x10000>;
-                       };
-
-                       rom: partition@7d0000 {
-                               label = "rom";
-                               reg = <0x7d0000 0x10000>;
-                       };
-
-                       partition@7e0000 {
-                               label = "romfile";
-                               reg = <0x7e0000 0x10000>;
-                       };
-
-                       radio: partition@7f0000 {
-                               label = "radio";
-                               reg = <0x7f0000 0x10000>;
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&ethernet {
-               pinctrl-names = "default";
-               mtd-mac-address = <&rom 0xf100>;
-               mediatek,portmap = "wllll";
+&state_default {
+       gpio {
+               groups = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
+               function = "gpio";
        };
-
-&ehci {
-       status = "okay";
-};
-
-&ohci {
-       status = "okay";
-};
-
-&gsw {
-       mediatek,port4 = "ephy";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&radio 0>;
-};
-
-&pcie {
-       status = "okay";
+       mtd-mac-address = <&rom 0xf100>;
 };
 
-&pcie0 {
-       mt76@0,0 {
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&radio 32768>;
-               ieee80211-freq-limit = <5000000 6000000>;
-       };
+&wifi {
+       mtd-mac-address = <&rom 0xf100>;
+       mtd-mac-address-increment = <(-1)>;
 };