ramips: fix factory partition size for SNR-CPE-W4N

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_zbtlink_zbt-ape522ii.dts

diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-ape522ii.dts b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-ape522ii.dts
index c2c6b8b4bb73d48695be3dc5fb3f73875028d91b..d85e35b69449d6721e31d51af442f28259ce0e8b 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-ape522ii.dts
+++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-ape522ii.dts
@@ -1,5 +1,3 @@
-/dts-v1/;
-
 #include "mt7620a.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
@@ -17,27 +15,27 @@
                compatible = "gpio-leds";
 
                sys1 {
-                       label = "zbt-ape522ii:green:sys1";
+                       label = "green:sys1";
                        gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
                };
 
                sys2 {
-                       label = "zbt-ape522ii:green:sys2";
+                       label = "green:sys2";
                        gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
                };
 
                sys3 {
-                       label = "zbt-ape522ii:green:sys3";
+                       label = "green:sys3";
                        gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
                };
 
                sys4 {
-                       label = "zbt-ape522ii:green:sys4";
+                       label = "green:sys4";
                        gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
                };
 
                wlan2g4 {
-                       label = "zbt-ape522ii:green:wlan2g4";
+                       label = "green:wlan2g4";
                        gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
                };
        };
@@ -53,18 +51,6 @@
        };
 };
 
-&gpio0 {
-       status = "okay";
-};
-
-&gpio1 {
-       status = "okay";
-};
-
-&gpio2 {
-       status = "okay";
-};
-
 &gpio3 {
        status = "okay";
 };
@@ -72,7 +58,7 @@
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -94,9 +80,24 @@
                        };
 
                        factory: partition@40000 {
+                               compatible = "nvmem-cells";
                                label = "factory";
                                reg = <0x40000 0x10000>;
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                read-only;
+
+                               eeprom_factory_0: eeprom@0 {
+                                       reg = <0x0 0x200>;
+                               };
+
+                               eeprom_factory_8000: eeprom@8000 {
+                                       reg = <0x8000 0x200>;
+                               };
+
+                               macaddr_factory_4: macaddr@4 {
+                                       reg = <0x4 0x6>;
+                               };
                        };
 
                        partition@50000 {
@@ -111,14 +112,19 @@
 &ethernet {
        pinctrl-names = "default";
        pinctrl-0 = <&ephy_pins>;
-       mtd-mac-address = <&factory 0x4>;
-       mediatek,portmap = "wllll";
+
+       nvmem-cells = <&macaddr_factory_4>;
+       nvmem-cell-names = "mac-address";
+
+       mediatek,portmap = "llllw";
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0>;
-       pinctrl-names = "default";
+       pinctrl-names = "default", "pa_gpio";
        pinctrl-0 = <&pa_pins>;
+       pinctrl-1 = <&pa_gpio_pins>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &pcie {
@@ -128,7 +134,8 @@
 &pcie0 {
        mt76@0,0 {
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
+               nvmem-cells = <&eeprom_factory_8000>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <5000000 6000000>;
        };
 };