ramips: add support for TP-Link MR6400 v5
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_edimax_rg21s.dts
index 6ed08413c143c5cdf0543f00b5e2f152539de94c..6ac01dd86d073f55f78d2abbc2cf418a00784738 100644 (file)
@@ -1,155 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7621_edimax_rx21s.dtsi"
 
 / {
        compatible = "edimax,rg21s", "mediatek,mt7621-soc";
        model = "Edimax RG21S";
-
-       aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600";
-       };
-
-       palmbus: palmbus@1E000000 {
-               i2c@900 {
-                       status = "okay";
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_power: led_1 {
-                       label = "rg21s:red:led1";
-                       gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_2 {
-                       label = "rg21s:red:led2";
-                       gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_3 {
-                       label = "rg21s:red:led3";
-                       gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_4 {
-                       label = "rg21s:red:led4";
-                       gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&sdhci {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0xfb0000>;
-                       };
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-};
-
-&pcie0 {
-       wifi0: wifi@0,0 {
-               compatible = "pci14c3,7615";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0000>;
-               ieee80211-freq-limit = <2400000 2500000>;
-       };
-};
-
-&pcie1 {
-       wifi1: wifi@0,0 {
-               compatible = "pci14c3,7615";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-       };
-};
-
-&ethernet {
-       mediatek,portmap = "wllll";
-       port@5 {
-               status = "disabled";
-       };
-};
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "wdt", "rgmii2", "jtag", "mdio";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&xhci {
-       status = "disabled";
 };