ramips: fix LAN LED trigger assignment for Xiaomi Router 3 Pro

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_iodata_wn-xx-xr.dtsi

diff --git a/target/linux/ramips/dts/mt7621_iodata_wn-xx-xr.dtsi b/target/linux/ramips/dts/mt7621_iodata_wn-xx-xr.dtsi
index b582f32eeae89f82c2ab722d79efd3deada13345..ff9e525ae28deab3957f0a04aa1be325affa6bfc 100644 (file)
--- a/target/linux/ramips/dts/mt7621_iodata_wn-xx-xr.dtsi
+++ b/target/linux/ramips/dts/mt7621_iodata_wn-xx-xr.dtsi
@@ -11,22 +11,19 @@
                led-failsafe = &led_power;
                led-running = &led_power;
                led-upgrade = &led_power;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600";
+               label-mac-device = &wan;
        };
 
        leds {
                compatible = "gpio-leds";
 
                wps {
-                       label = "iodata:green:wps";
+                       label = "green:wps";
                        gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
                };
 
                led_power: power {
-                       label = "iodata:green:power";
+                       label = "green:power";
                        gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
                };
        };
@@ -120,18 +117,48 @@
        };
 };
 
-&ethernet {
+&gmac0 {
        mtd-mac-address = <&factory 0xe000>;
 };
 
+&switch0 {
+       ports {
+               wan: port@0 {
+                       status = "okay";
+                       label = "wan";
+                       mtd-mac-address = <&factory 0xe006>;
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan4";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@4 {
+                       status = "okay";
+                       label = "lan1";
+               };
+       };
+};
+
 &pcie {
        status = "okay";
 };
 
 &state_default {
        gpio {
-               ralink,group = "uart2", "uart3", "wdt";
-               ralink,function = "gpio";
+               groups = "uart2", "uart3", "wdt";
+               function = "gpio";
        };
 };