ramips: mt7621: add interrupt-controller

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_wavlink_wl-wn531a6.dts

diff --git a/target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts b/target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts
index 0f017fd8292f670d8feac9442883d83f08a454f5..0d6c81cf6273b4247234ecf5d337a72d46b9f852 100644 (file)
--- a/target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts
+++ b/target/linux/ramips/dts/mt7621_wavlink_wl-wn531a6.dts
@@ -1,184 +1,32 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7621_wavlink_wl-wn53xax.dtsi"
 
 / {
        compatible = "wavlink,wl-wn531a6", "mediatek,mt7621-soc";
        model = "Wavlink WL-WN531A6";
-
-       aliases {
-               led-boot = &led_status_red;
-               led-failsafe = &led_status_red;
-               led-running = &led_status_blue;
-               led-upgrade = &led_status_red;
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "Reset Button";
-                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               touch { /* RH6015C touch sensor -> GPIO 14 */
-                       label = "Touch Button";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-               };
-
-               turbo {
-                       label = "Turbo Button";
-                       gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_1>;
-               };
-
-               wps {
-                       label = "WPS Button";
-                       gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_status_blue: status_blue {
-                       label = "wl-wn531a6:blue:power";
-                       gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-               };
-
-               led_status_red: status_red {
-                       label = "wl-wn531a6:red:power";
-                       gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
-               };
-
-               wifi2g {
-                       label = "wl-wn531a6:blue:wifi2g";
-                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-       };
-};
-
-&i2c {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <40000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x30000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "config";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@40000 {
-                               label = "factory";
-                               reg = <0x40000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@50000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x50000 0xeb0000>;
-                       };
-
-                       partition@f00000 {
-                               label = "vendor";
-                               reg = <0xf00000 0x100000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
 };
 
-&pcie0 {
-       mt76@0,0 {
-               compatible = "mediatek,mt76";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0>;
-               ieee80211-freq-limit = <2400000 2500000>;
-       };
+&wifi0{
+       ieee80211-freq-limit = <2400000 2500000>;
 };
 
-&pcie1 {
-       mt76@0,0 {
-               compatible = "mediatek,mt76";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-       };
+&wifi1{
+       ieee80211-freq-limit = <5000000 6000000>;
 };
 
-&gmac0 {
-       mtd-mac-address = <&factory 0xe000>;
+&port0{
+       label = "lan1";
 };
 
-&switch0 {
-       ports {
-               port@0 {
-                       status = "okay";
-                       label = "lan1";
-               };
-
-               port@1 {
-                       status = "okay";
-                       label = "lan2";
-               };
-
-               port@2 {
-                       status = "okay";
-                       label = "lan3";
-               };
-
-               port@3 {
-                       status = "okay";
-                       label = "lan4";
-               };
-
-               port@4 {
-                       status = "okay";
-                       label = "wan";
-                       mtd-mac-address = <&factory 0xe006>;
-               };
-       };
+&port1{
+       label = "lan2";
 };
 
-&state_default {
-       gpio {
-               groups = "rgmii2", "jtag", "wdt";
-               function = "gpio";
-       };
+&port2{
+       label = "lan3";
 };
 
-&uartlite2 {
-       status = "okay";
+&port3{
+       label = "lan4";
 };