ramips: fix LAN LED trigger assignment for Xiaomi Router 3 Pro

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_youku_yk-l2.dts

diff --git a/target/linux/ramips/dts/mt7621_youku_yk-l2.dts b/target/linux/ramips/dts/mt7621_youku_yk-l2.dts
index 49fa312f584b5dc8dab89d96370b6fe5f810ed50..627188873d08a6126a427ce7d2ee79e6fcc0df30 100644 (file)
--- a/target/linux/ramips/dts/mt7621_youku_yk-l2.dts
+++ b/target/linux/ramips/dts/mt7621_youku_yk-l2.dts
@@ -1,5 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
 #include "mt7621.dtsi"
 
@@ -25,18 +24,18 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "yk-l2:blue:power";
+                       label = "blue:power";
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                led_wps: wps {
-                       label = "yk-l2:blue:wps";
+                       label = "blue:wps";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "yk-l2:blue:usb";
+                       label = "blue:usb";
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
                        linux,default-trigger = "usbport";
@@ -64,10 +63,6 @@
        status = "okay";
 };
 
-&xhci {
-       status = "okay";
-};
-
 &spi0 {
        status = "okay";
 
@@ -137,10 +132,40 @@
        };
 };
 
-&ethernet {
+&gmac0 {
        mtd-mac-address = <&factory 0xe000>;
 };
 
+&switch0 {
+       ports {
+               port@0 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@1 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               port@2 {
+                       status = "okay";
+                       label = "lan3";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan4";
+               };
+
+               port@4 {
+                       status = "okay";
+                       label = "wan";
+                       mtd-mac-address = <&factory 0xe006>;
+               };
+       };
+};
+
 &state_default {
        gpio {
                groups = "jtag", "wdt";