ramips: correct the PCIe port number for Unielec u7621-01
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_iptime_a604m.dts
index d21f4f69746aaa32bf2e2dd91cb3393bf6d5518d..2f626f1adf7031dbd27cf1c0ba94a3d39eed5b42 100644 (file)
@@ -1,10 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
-#include "mt7628an.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "mt7628an_iptime.dtsi"
 
 / {
        compatible = "iptime,a604m", "mediatek,mt7628an-soc";
                compatible = "gpio-leds";
 
                wlan5g {
-                       label = "a604m:blue:wlan5g";
-                       gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+                       label = "blue:wlan5g";
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy1tpt";
                };
 
                led_cpu: cpu {
-                       label = "a604m:blue:cpu";
-                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+                       label = "blue:cpu";
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                };
 
                wlan2g {
-                       label = "a604m:blue:wlan2g";
-                       gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+                       label = "blue:wlan2g";
+                       gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
        };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-       };
 };
 
-&spi0 {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <40000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       uboot: partition@0 {
-                               label = "u-boot";
-                               reg = <0x0 0x20000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               label = "config";
-                               reg = <0x20000 0x10000>;
-                               read-only;
-                       };
-
-                       factory: partition@30000 {
-                               label = "factory";
-                               reg = <0x30000 0x10000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x40000 0x7c0000>;
-                       };
-               };
+&state_default {
+       gpio {
+               groups = "i2c", "uart1", "wdt";
+               function = "gpio";
        };
 };
-
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "i2c", "uart1", "wdt";
-                       ralink,function = "gpio";
-               };
-       };
-};
-
-&ehci {
-       status = "disabled";
-};
-
-&ohci {
-       status = "disabled";
-};
-
-&ethernet {
-       mtd-mac-address = <&uboot 0x1fc20>;
-};
-
-&pcie {
-       status = "okay";
-};
-
-&pcie0 {
-       wifi@0,0 {
-               compatible = "mediatek,mt76";
-               reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
-               ieee80211-freq-limit = <5000000 6000000>;
-       };
-};
-
-&wmac {
-       status = "okay";
-};