ramips: add support for Z-ROUTER ZR-2660
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_tplink_tl-wr840n-v5.dts
index 1f8f7f4babc88f579a6a45fa38a201807365b576..8c7192fca805de85fde90981392f694dc989e49f 100644 (file)
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "tplink,tl-wr840n-v5", "mediatek,mt7628an-soc";
                compatible = "gpio-leds";
 
                led_power_green: power {
-                       label = "green:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
                };
 
                orange {
-                       label = "orange:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_ORANGE>;
                        gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
                };
        };
                                reg = <0x20000 0x3d0000>;
                        };
 
-                       factory: partition@3f0000 {
+                       partition@3f0000 {
                                label = "factory";
                                reg = <0x3f0000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x400>;
+                                       };
+
+                                       macaddr_factory_f100: macaddr@f100 {
+                                               reg = <0xf100 0x6>;
+                                       };
+                               };
                        };
                };
        };
 
 &wmac {
        status = "okay";
-       mtd-mac-address = <&factory 0xf100>;
+
+       nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_f100>;
+       nvmem-cell-names = "eeprom", "mac-address";
 };
 
 &ethernet {
-       mtd-mac-address = <&factory 0xf100>;
+       nvmem-cells = <&macaddr_factory_f100>;
+       nvmem-cell-names = "mac-address";
 };
 
 &esw {