ramips: use DT trigger for 2G WiFi on ASUS RT-AC51U

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7628an_zbtlink_zbt-we1226.dts

diff --git a/target/linux/ramips/dts/mt7628an_zbtlink_zbt-we1226.dts b/target/linux/ramips/dts/mt7628an_zbtlink_zbt-we1226.dts
index aace0042e4d659a15e9b5d0f9d1a02de69316ec1..01cdd8ad86e4d4c57ac0b371fce3dccd07f7b54d 100644 (file)
--- a/target/linux/ramips/dts/mt7628an_zbtlink_zbt-we1226.dts
+++ b/target/linux/ramips/dts/mt7628an_zbtlink_zbt-we1226.dts
@@ -19,18 +19,12 @@
                bootargs = "console=ttyS0,115200";
        };
 
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x4000000>;
-       };
-
        keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
+               compatible = "gpio-keys";
 
                reset {
                        label = "reset";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
                };
        };
@@ -40,39 +34,37 @@
 
                wan {
                        label = "zbt-we1226:green:wan";
-                       gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
                };
 
                lan1 {
                        label = "zbt-we1226:green:lan1";
-                       gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
                };
 
                lan2 {
                        label = "zbt-we1226:green:lan2";
-                       gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
                };
 
                led_wlan: wlan {
                        label = "zbt-we1226:green:wlan";
-                       gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
                };
        };
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an";
-                       ralink,function = "gpio";
-               };
+&state_default {
+       gpio {
+               groups = "p0led_an", "p1led_an", "p4led_an", "wdt", "wled_an";
+               function = "gpio";
        };
 };
 
 &spi0 {
        status = "okay";
 
-       m25p80@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -111,10 +103,12 @@
 
 &wmac {
        status = "okay";
-       ralink,mtd-eeprom = <&factory 0x4>;
 };
 
 &ethernet {
        mtd-mac-address = <&factory 0x2e>;
-       mediatek,portmap = "llllw";
+};
+
+&esw {
+       mediatek,portmap = <0x2f>;
 };