ramips: drop obsolete sd card driver code

[openwrt/openwrt.git] / target / linux / ramips / files-4.14 / drivers / mmc / host / mtk-mmc / sd.c

diff --git a/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c b/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c
index 97ae927d2d2a8dff26cee1dc7f56e36d23a5ee15..4ced4b6605e196c3b1f5769e6472631fc52cfa52 100644 (file)
--- a/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c
+++ b/target/linux/ramips/files-4.14/drivers/mmc/host/mtk-mmc/sd.c
@@ -2207,27 +2207,15 @@ static int msdc_drv_probe(struct platform_device *pdev)
        int ret;
        u32 reg;
 
-       // Set the pins for sdxc to sdxc mode
-       //FIXME: this should be done by pinctl and not by the sd driver
-       if (ralink_soc == MT762X_SOC_MT7620A ||
-           ralink_soc == MT762X_SOC_MT7621AT) {
-               reg = sdr_read32((void __iomem *)(RALINK_SYSCTL_BASE +
-                                                 0x60)) & ~(0x3 << 18);
-               if (ralink_soc == MT762X_SOC_MT7620A)
-                       reg |= 0x1 << 18;
-       } else {
+       //FIXME: this should be done by pinconf and not by the sd driver
+       if (ralink_soc == MT762X_SOC_MT7688 ||
+           ralink_soc == MT762X_SOC_MT7628AN) {
+               /* set EPHY pads to digital mode */
                reg = sdr_read32((void __iomem *)(RALINK_SYSCTL_BASE + 0x3c));
                reg |= 0x1e << 16;
                sdr_write32((void __iomem *)(RALINK_SYSCTL_BASE + 0x3c), reg);
-               reg = sdr_read32((void __iomem *)(RALINK_SYSCTL_BASE +
-                                                 0x60)) & ~(0x3 << 10);
-#if defined(CONFIG_MTK_MMC_EMMC_8BIT)
-               reg |= 0x3 << 26 | 0x3 << 28 | 0x3 << 30;
-#endif
        }
 
-       sdr_write32((void __iomem *)(RALINK_SYSCTL_BASE + 0x60), reg);
-
        hw = &msdc0_hw;
 
        if (of_property_read_bool(pdev->dev.of_node, "mtk,wp-en"))