define Build/tplink-header
$(STAGING_DIR_HOST)/bin/mktplinkfw2 -a 0x4 -V "ver. 2.0" -B $(1) \
- -o $@.new -k $@ && mv $@.new $@
-endef
-
-define Build/pad-kernel-ex2700
- cp $@ $@.tmp && dd if=/dev/zero bs=64 count=1 >> $@.tmp \
- && dd if=$@.tmp of=$@.new bs=64k conv=sync && truncate -s -64 $@.new \
- && cat ex2700-fakeroot.uImage >> $@.new && rm $@.tmp && mv $@.new $@
-endef
-
-define Build/netgear-header
- $(STAGING_DIR_HOST)/bin/mkdniimg \
- $(1) -v OpenWrt -i $@ \
- -o $@.new && mv $@.new $@
-endef
-
-define Build/poray-header
- mkporayfw $(1) \
- -f $@ \
- -o $@.new; \
- mv $@.new $@
+ -o $@.new -k $@ -r $(IMAGE_ROOTFS) && mv $@.new $@
endef
define Build/elecom-header
cp $@ $(KDIR)/v_0.0.0.bin
( \
- $(STAGING_DIR_HOST)/bin/md5sum $(KDIR)/v_0.0.0.bin | \
- sed 's/ .*//' && \
+ mkhash md5 $(KDIR)/v_0.0.0.bin && \
echo 458 \
- ) | $(STAGING_DIR_HOST)/bin/md5sum | \
- sed 's/ .*//' > $(KDIR)/v_0.0.0.md5
+ ) | mkhash md5 > $(KDIR)/v_0.0.0.md5
$(STAGING_DIR_HOST)/bin/tar -cf $@ -C $(KDIR) v_0.0.0.bin v_0.0.0.md5
endef
define Device/ArcherC20i
DTS := ArcherC20i
+ SUPPORTED_DEVICES := c20i
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-header ArcherC20i -c
- IMAGE/sysupgrade.bin := append-kernel | tplink-header ArcherC20i -j -r $(KDIR)/root.squashfs | append-metadata
+ IMAGE/sysupgrade.bin := append-kernel | tplink-header ArcherC20i -j | append-metadata
DEVICE_TITLE := TP-Link ArcherC20i
endef
TARGET_DEVICES += ArcherC20i
define Device/ArcherC50
DTS := ArcherC50
+ SUPPORTED_DEVICES := c50
KERNEL := $(KERNEL_DTB)
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-header ArcherC50 -c
- IMAGE/sysupgrade.bin := append-kernel | tplink-header ArcherC50 -j -r $(KDIR)/root.squashfs | append-metadata
+ IMAGE/sysupgrade.bin := append-kernel | tplink-header ArcherC50 -j | append-metadata
DEVICE_TITLE := TP-Link ArcherC50
endef
TARGET_DEVICES += ArcherC50
+define Device/ArcherMR200
+ DTS := ArcherMR200
+ SUPPORTED_DEVICES := mr200
+ KERNEL := $(KERNEL_DTB)
+ KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-header ArcherMR200 -c
+ IMAGE/sysupgrade.bin := append-kernel | tplink-header ArcherMR200 -j | append-metadata
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb
+ DEVICE_TITLE := TP-Link ArcherMR200
+endef
+TARGET_DEVICES += ArcherMR200
+
define Device/ex2700
+ NETGEAR_HW_ID := 29764623+4+0+32+2x2+0
+ NETGEAR_BOARD_ID := EX2700
DTS := EX2700
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
- KERNEL := $(KERNEL_DTB) | uImage lzma | pad-kernel-ex2700
- IMAGE/factory.bin := $$(sysupgrade_bin) | netgear-header -B EX2700 -H 29764623+4+0+32+2x2+0
+ KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | append-uImage-fakeroot-hdr
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+ netgear-dni
DEVICE_TITLE := Netgear EX2700
endef
TARGET_DEVICES += ex2700
+define Device/wn3000rpv3
+ NETGEAR_HW_ID := 29764836+8+0+32+2x2+0
+ NETGEAR_BOARD_ID := WN3000RPv3
+ DTS := WN3000RPV3
+ BLOCKSIZE := 4k
+ IMAGES += factory.bin
+ KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | append-uImage-fakeroot-hdr
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+ netgear-dni
+ DEVICE_TITLE := Netgear WN3000RPv3
+endef
+TARGET_DEVICES += wn3000rpv3
+
define Device/wt3020-4M
DTS := WT3020-4M
BLOCKSIZE := 4k
IMAGE_SIZE := $(ralink_default_fw_size_4M)
IMAGES += factory.bin
- SUPPORTED_DEVICES := wt3020
- IMAGE/factory.bin := $$(sysupgrade_bin) | poray-header -B WT3020 -F 4M
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+ poray-header -B WT3020 -F 4M
DEVICE_TITLE := Nexx WT3020 (4MB)
endef
TARGET_DEVICES += wt3020-4M
define Device/wt3020-8M
DTS := WT3020-8M
IMAGES += factory.bin
- SUPPORTED_DEVICES := wt3020
- IMAGE/factory.bin := $$(sysupgrade_bin) | poray-header -B WT3020 -F 8M
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+ poray-header -B WT3020 -F 8M
DEVICE_TITLE := Nexx WT3020 (8MB)
endef
TARGET_DEVICES += wt3020-8M
DTS := WRH-300CR
IMAGE_SIZE := $(ralink_default_fw_size_16M)
IMAGES += factory.bin
- IMAGE/factory.bin := $$(sysupgrade_bin) | elecom-header
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+ elecom-header
DEVICE_TITLE := Elecom WRH-300CR
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
endef
define Device/e1700
DTS := E1700
IMAGES += factory.bin
- IMAGE/factory.bin := $$(sysupgrade_bin) | umedia-header 0x013326
+ IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+ umedia-header 0x013326
DEVICE_TITLE := Linksys E1700
endef
TARGET_DEVICES += e1700
endef
TARGET_DEVICES += dch-m225
+define Device/kn_rc
+ DTS := kn_rc
+ DEVICE_TITLE := ZyXEL Keenetic Omni
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
+ zyimage -d 4882 -v "ZyXEL Keenetic Omni"
+endef
+TARGET_DEVICES += kn_rc
+
+define Device/kn_rf
+ DTS := kn_rf
+ DEVICE_TITLE := ZyXEL Keenetic Omni II
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
+ zyimage -d 2102034 -v "ZyXEL Keenetic Omni II"
+endef
+TARGET_DEVICES += kn_rf
+
define Device/kng_rc
DTS := kng_rc
IMAGE_SIZE := $(ralink_default_fw_size_16M)
DEVICE_TITLE := ZyXEL Keenetic Viva
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
IMAGES += factory.bin
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | zyimage -d 8997 -v "ZyXEL Keenetic Viva"
+ IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | check-size $$$$(IMAGE_SIZE) | \
+ zyimage -d 8997 -v "ZyXEL Keenetic Viva"
endef
TARGET_DEVICES += kng_rc
projects / openwrt / openwrt.git / blobdiff