package/firmware/ipq-wifi/Makefile

   1 include $(TOPDIR)/rules.mk
   2 include $(INCLUDE_DIR)/version.mk
   3
   4 PKG_NAME:=ipq-wifi
   5 PKG_RELEASE:=1
   6 PKG_FLAGS:=nonshared
   7
   8 include $(INCLUDE_DIR)/package.mk
   9
  10 define Build/Prepare
  11         mkdir -p $(PKG_BUILD_DIR)
  12 endef
  13
  14 define Build/Compile
  15 endef
  16
  17 # Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
  18 # to generate the board-* files here.
  19 #
  20 # This is intended to be used on an interim basis until device-specific
  21 # board data for new devices is available through the upstream compilation
  22 #
  23 # Please send a mail with your device-specific board files upstream.
  24 # You can find instructions and examples on the linux-wireless wiki:
  25 # <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
  26
  27 ALLWIFIBOARDS:= \
  28         8dev_habanero-dvk \
  29         aruba_ap-303 \
  30         avm_fritzrepeater-1200 \
  31         buffalo_wtr-m2133hp \
  32         cellc_rtl30vw \
  33         dlink_dap2610 \
  34         edgecore_ecw5211 \
  35         edgecore_ecw5410 \
  36         edgecore_oap100 \
  37         engenius_eap2200 \
  38         engenius_emd1 \
  39         engenius_emr3500 \
  40         ezviz_cs-w3-wd1200g-eup \
  41         glinet_gl-s1300 \
  42         linksys_ea8300 \
  43         luma_wrtq-329acn \
  44         mobipromo_cm520-79f \
  45         qxwlan_e2600ac
  46
  47 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
  48
  49 define Package/ipq-wifi-default
  50   SUBMENU:=ath10k Board-Specific Overrides
  51   SECTION:=firmware
  52   CATEGORY:=Firmware
  53   DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x)
  54   TITLE:=Custom Board
  55 endef
  56
  57 define ipq-wifi-install-one-to
  58   $(INSTALL_DIR)  $(2)/lib/firmware/ath10k/$(3)/
  59   $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
  60 endef
  61
  62 define ipq-wifi-install-one
  63   $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
  64     $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
  65   $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
  66     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
  67   $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
  68     $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
  69     $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
  70   )))
  71
  72 endef
  73 # Blank line required at end of above define due to foreach context
  74
  75 define generate-ipq-wifi-package
  76   define Package/ipq-wifi-$(1)
  77     $(call Package/ipq-wifi-default)
  78     TITLE:=board-2.bin Overrides for $(2)
  79     CONFLICTS:=$(PREV_BOARD)
  80   endef
  81
  82   define Package/ipq-wifi-$(1)/description
  83 The $(2) requires board-specific, reference ("cal") data
  84 that is not yet present in the upstream wireless firmware distribution.
  85
  86 This package supplies board-2.bin file(s) that, in the interim,
  87 overwrite those supplied by the ath10k-firmware-* packages.
  88
  89 This is package is only necessary for the $(2).
  90
  91 Do not install it for any other device!
  92   endef
  93
  94   define Package/ipq-wifi-$(1)/install-overlay
  95     $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\
  96       $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
  97   endef
  98
  99   PREV_BOARD+=ipq-wifi-$(1)
 100 endef
 101
 102 # Add board name to ALLWIFIBOARDS
 103 # Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
 104 # Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
 105
 106 $(eval $(call generate-ipq-wifi-package,8dev_habanero-dvk,8devices Habanero DVK))
 107 $(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
 108 $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
 109 $(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP))
 110 $(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW))
 111 $(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610))
 112 $(eval $(call generate-ipq-wifi-package,edgecore_ecw5211,Edgecore ECW5211))
 113 $(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
 114 $(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
 115 $(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200))
 116 $(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
 117 $(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
 118 $(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
 119 $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
 120 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
 121 $(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
 122 $(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
 123 $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
 124
 125 $(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))