ath9k: show more reset causes in debugfs
[openwrt/staging/chunkeey.git] / package / kernel / mac80211 / patches / 300-pending_work.patch
1 commit d5d87a37bbd6066b2c3c5d0bd0fe2a6e2ea45cc5
2 Author: Felix Fietkau <nbd@openwrt.org>
3 Date: Fri Feb 21 11:39:59 2014 +0100
4
5 ath9k: list more reset causes in debugfs
6
7 Number of MAC hangs and stuck beacons were missing
8
9 Signed-off-by: Felix Fietkau <nbd@openwrt.org>
10
11 commit d84856012e0f10fe598a5ad3b7b869397a089e07
12 Author: Johannes Berg <johannes.berg@intel.com>
13 Date: Thu Feb 20 11:19:58 2014 +0100
14
15 mac80211: fix station wakeup powersave race
16
17 Consider the following (relatively unlikely) scenario:
18 1) station goes to sleep while frames are buffered in driver
19 2) driver blocks wakeup (until no more frames are buffered)
20 3) station wakes up again
21 4) driver unblocks wakeup
22
23 In this case, the current mac80211 code will do the following:
24 1) WLAN_STA_PS_STA set
25 2) WLAN_STA_PS_DRIVER set
26 3) - nothing -
27 4) WLAN_STA_PS_DRIVER cleared
28
29 As a result, no frames will be delivered to the client, even
30 though it is awake, until it sends another frame to us that
31 triggers ieee80211_sta_ps_deliver_wakeup() in sta_ps_end().
32
33 Since we now take the PS spinlock, we can fix this while at
34 the same time removing the complexity with the pending skb
35 queue function. This was broken since my commit 50a9432daeec
36 ("mac80211: fix powersaving clients races") due to removing
37 the clearing of WLAN_STA_PS_STA in the RX path.
38
39 While at it, fix a cleanup path issue when a station is
40 removed while the driver is still blocking its wakeup.
41
42 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
43
44 commit 798f2786602cbe93e6b928299614aa36ebf50692
45 Author: Johannes Berg <johannes.berg@intel.com>
46 Date: Mon Feb 17 20:49:03 2014 +0100
47
48 mac80211: insert stations before adding to driver
49
50 There's a race condition in mac80211 because we add stations
51 to the internal lists after adding them to the driver, which
52 means that (for example) the following can happen:
53 1. a station connects and is added
54 2. first, it is added to the driver
55 3. then, it is added to the mac80211 lists
56
57 If the station goes to sleep between steps 2 and 3, and the
58 firmware/hardware records it as being asleep, mac80211 will
59 never instruct the driver to wake it up again as it never
60 realized it went to sleep since the RX path discarded the
61 frame as a "spurious class 3 frame", no station entry was
62 present yet.
63
64 Fix this by adding the station in software first, and only
65 then adding it to the driver. That way, any state that the
66 driver changes will be reflected properly in mac80211's
67 station state. The problematic part is the roll-back if the
68 driver fails to add the station, in that case a bit more is
69 needed. To not make that overly complex prevent starting BA
70 sessions in the meantime.
71
72 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
73
74 commit b9ba6a520cb07ab3aa7aaaf9ce4a0bc7a6bc06fe
75 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
76 Date: Thu Feb 20 09:22:11 2014 +0200
77
78 mac80211: fix AP powersave TX vs. wakeup race
79
80 There is a race between the TX path and the STA wakeup: while
81 a station is sleeping, mac80211 buffers frames until it wakes
82 up, then the frames are transmitted. However, the RX and TX
83 path are concurrent, so the packet indicating wakeup can be
84 processed while a packet is being transmitted.
85
86 This can lead to a situation where the buffered frames list
87 is emptied on the one side, while a frame is being added on
88 the other side, as the station is still seen as sleeping in
89 the TX path.
90
91 As a result, the newly added frame will not be send anytime
92 soon. It might be sent much later (and out of order) when the
93 station goes to sleep and wakes up the next time.
94
95 Additionally, it can lead to the crash below.
96
97 Fix all this by synchronising both paths with a new lock.
98 Both path are not fastpath since they handle PS situations.
99
100 In a later patch we'll remove the extra skb queue locks to
101 reduce locking overhead.
102
103 BUG: unable to handle kernel
104 NULL pointer dereference at 000000b0
105 IP: [<ff6f1791>] ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
106 *pde = 00000000
107 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
108 EIP: 0060:[<ff6f1791>] EFLAGS: 00210282 CPU: 1
109 EIP is at ieee80211_report_used_skb+0x11/0x3e0 [mac80211]
110 EAX: e5900da0 EBX: 00000000 ECX: 00000001 EDX: 00000000
111 ESI: e41d00c0 EDI: e5900da0 EBP: ebe458e4 ESP: ebe458b0
112 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
113 CR0: 8005003b CR2: 000000b0 CR3: 25a78000 CR4: 000407d0
114 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
115 DR6: ffff0ff0 DR7: 00000400
116 Process iperf (pid: 3934, ti=ebe44000 task=e757c0b0 task.ti=ebe44000)
117 iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command LQ_CMD (#4e), seq: 0x0903, 92 bytes at 3[3]:9
118 Stack:
119 e403b32c ebe458c4 00200002 00200286 e403b338 ebe458cc c10960bb e5900da0
120 ff76a6ec ebe458d8 00000000 e41d00c0 e5900da0 ebe458f0 ff6f1b75 e403b210
121 ebe4598c ff723dc1 00000000 ff76a6ec e597c978 e403b758 00000002 00000002
122 Call Trace:
123 [<ff6f1b75>] ieee80211_free_txskb+0x15/0x20 [mac80211]
124 [<ff723dc1>] invoke_tx_handlers+0x1661/0x1780 [mac80211]
125 [<ff7248a5>] ieee80211_tx+0x75/0x100 [mac80211]
126 [<ff7249bf>] ieee80211_xmit+0x8f/0xc0 [mac80211]
127 [<ff72550e>] ieee80211_subif_start_xmit+0x4fe/0xe20 [mac80211]
128 [<c149ef70>] dev_hard_start_xmit+0x450/0x950
129 [<c14b9aa9>] sch_direct_xmit+0xa9/0x250
130 [<c14b9c9b>] __qdisc_run+0x4b/0x150
131 [<c149f732>] dev_queue_xmit+0x2c2/0xca0
132
133 Cc: stable@vger.kernel.org
134 Reported-by: Yaara Rozenblum <yaara.rozenblum@intel.com>
135 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
136 Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com>
137 [reword commit log, use a separate lock]
138 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
139
140 commit 80e419de0dff38436b30d363311c625766193f86
141 Author: Inbal Hacohen <Inbal.Hacohen@intel.com>
142 Date: Wed Feb 12 09:32:27 2014 +0200
143
144 cfg80211: bugfix in regulatory user hint process
145
146 After processing hint_user, we would want to schedule the
147 timeout work only if we are actually waiting to CRDA. This happens
148 when the status is not "IGNORE" nor "ALREADY_SET".
149
150 Signed-off-by: Inbal Hacohen <Inbal.Hacohen@intel.com>
151 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
152
153 commit 6514c93afede55284e2cb63359aadedb85884c80
154 Author: Jouni Malinen <jouni@qca.qualcomm.com>
155 Date: Tue Feb 18 20:41:08 2014 +0200
156
157 ath9k: Enable U-APSD AP mode support
158
159 mac80211 handles the actual operations, so ath9k can just indicate
160 support for this. Based on initial tests, this combination seems to
161 work fine.
162
163 Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
164
165 commit a63caf0a357ad5c1f08d6b7827dc76c451445017
166 Author: Stanislaw Gruszka <sgruszka@redhat.com>
167 Date: Wed Feb 19 13:15:17 2014 +0100
168
169 ath9k: protect tid->sched check
170
171 We check tid->sched without a lock taken on ath_tx_aggr_sleep(). That
172 is race condition which can result of doing list_del(&tid->list) twice
173 (second time with poisoned list node) and cause crash like shown below:
174
175 [424271.637220] BUG: unable to handle kernel paging request at 00100104
176 [424271.637328] IP: [<f90fc072>] ath_tx_aggr_sleep+0x62/0xe0 [ath9k]
177 ...
178 [424271.639953] Call Trace:
179 [424271.639998] [<f90f6900>] ? ath9k_get_survey+0x110/0x110 [ath9k]
180 [424271.640083] [<f90f6942>] ath9k_sta_notify+0x42/0x50 [ath9k]
181 [424271.640177] [<f809cfef>] sta_ps_start+0x8f/0x1c0 [mac80211]
182 [424271.640258] [<c10f730e>] ? free_compound_page+0x2e/0x40
183 [424271.640346] [<f809e915>] ieee80211_rx_handlers+0x9d5/0x2340 [mac80211]
184 [424271.640437] [<c112f048>] ? kmem_cache_free+0x1d8/0x1f0
185 [424271.640510] [<c1345a84>] ? kfree_skbmem+0x34/0x90
186 [424271.640578] [<c10fc23c>] ? put_page+0x2c/0x40
187 [424271.640640] [<c1345a84>] ? kfree_skbmem+0x34/0x90
188 [424271.640706] [<c1345a84>] ? kfree_skbmem+0x34/0x90
189 [424271.640787] [<f809dde3>] ? ieee80211_rx_handlers_result+0x73/0x1d0 [mac80211]
190 [424271.640897] [<f80a07a0>] ieee80211_prepare_and_rx_handle+0x520/0xad0 [mac80211]
191 [424271.641009] [<f809e22d>] ? ieee80211_rx_handlers+0x2ed/0x2340 [mac80211]
192 [424271.641104] [<c13846ce>] ? ip_output+0x7e/0xd0
193 [424271.641182] [<f80a1057>] ieee80211_rx+0x307/0x7c0 [mac80211]
194 [424271.641266] [<f90fa6ee>] ath_rx_tasklet+0x88e/0xf70 [ath9k]
195 [424271.641358] [<f80a0f2c>] ? ieee80211_rx+0x1dc/0x7c0 [mac80211]
196 [424271.641445] [<f90f82db>] ath9k_tasklet+0xcb/0x130 [ath9k]
197
198 Bug report:
199 https://bugzilla.kernel.org/show_bug.cgi?id=70551
200
201 Reported-and-tested-by: Max Sydorenko <maxim.stargazer@gmail.com>
202 Cc: stable@vger.kernel.org
203 Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
204
205 commit 82ed9e3ccc02797df2ffe4b78127c4cd5f799a41
206 Author: Felix Fietkau <nbd@openwrt.org>
207 Date: Tue Feb 11 15:54:13 2014 +0100
208
209 mac80211: send control port protocol frames to the VO queue
210
211 Improves reliability of wifi connections with WPA, since authentication
212 frames are prioritized over normal traffic and also typically exempt
213 from aggregation.
214
215 Cc: stable@vger.kernel.org
216 Signed-off-by: Felix Fietkau <nbd@openwrt.org>
217
218 commit d4426800f71e972feaa33e04c5801fc730627bdd
219 Author: Stanislaw Gruszka <stf_xl@wp.pl>
220 Date: Mon Feb 10 22:38:28 2014 +0100
221
222 rtl8187: fix regression on MIPS without coherent DMA
223
224 This patch fixes regression caused by commit a16dad77634 "MIPS: Fix
225 potencial corruption". That commit fixes one corruption scenario in
226 cost of adding another one, which actually start to cause crashes
227 on Yeeloong laptop when rtl8187 driver is used.
228
229 For correct DMA read operation on machines without DMA coherence, kernel
230 have to invalidate cache, such it will refill later with new data that
231 device wrote to memory, when that data is needed to process. We can only
232 invalidate full cache line. Hence when cache line includes both dma
233 buffer and some other data (written in cache, but not yet in main
234 memory), the other data can not hit memory due to invalidation. That
235 happen on rtl8187 where struct rtl8187_priv fields are located just
236 before and after small buffers that are passed to USB layer and DMA
237 is performed on them.
238
239 To fix the problem we align buffers and reserve space after them to make
240 them match cache line.
241
242 This patch does not resolve all possible MIPS problems entirely, for
243 that we have to assure that we always map cache aligned buffers for DMA,
244 what can be complex or even not possible. But patch fixes visible and
245 reproducible regression and seems other possible corruptions do not
246 happen in practice, since Yeeloong laptop works stable without rtl8187
247 driver.
248
249 Bug report:
250 https://bugzilla.kernel.org/show_bug.cgi?id=54391
251
252 Reported-by: Petr Pisar <petr.pisar@atlas.cz>
253 Bisected-by: Tom Li <biergaizi2009@gmail.com>
254 Reported-and-tested-by: Tom Li <biergaizi2009@gmail.com>
255 Cc: stable@vger.kernel.org
256 Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
257
258 commit e2f141d67ad1e7fe10aaab61811e8a409dfb2442
259 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
260 Date: Fri Feb 7 10:29:55 2014 +0530
261
262 ath9k: Calculate IQ-CAL median
263
264 This patch adds a routine to calculate the median IQ correction
265 values for AR955x, which is used for outlier detection.
266 The normal method which is used for all other chips is
267 bypassed for AR955x.
268
269 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
270
271 commit c52a6fce0820c8d0687443ab86058ae03b478c8f
272 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
273 Date: Fri Feb 7 10:29:54 2014 +0530
274
275 ath9k: Expand the IQ coefficient array
276
277 This will be used for storing data for mutiple
278 IQ calibration runs, for AR955x.
279
280 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
281
282 commit 034969ff5c2b6431d10e07c1938f0b916da85cc3
283 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
284 Date: Fri Feb 7 10:29:53 2014 +0530
285
286 ath9k: Modify IQ calibration for AR955x
287
288 IQ calibration post-processing for AR955x is different
289 from other chips - instead of just doing it as part
290 of AGC calibration once, it is triggered 3 times and
291 a median is determined. This patch adds initial support
292 for changing the calibration behavior for AR955x.
293
294 Also, to simplify things, a helper routine to issue/poll
295 AGC calibration is used.
296
297 For non-AR955x chips, the iqcal_idx (which will be used
298 in subsequent patches) is set to zero.
299
300 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
301
302 commit 9b1ed6454e6f3511f24266be99b4e403f243f6a8
303 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
304 Date: Fri Feb 7 10:29:52 2014 +0530
305
306 ath9k: Fix magnitude/phase calculation
307
308 Incorrect values are programmed in the registers
309 containing the IQ correction coefficients by the IQ-CAL
310 post-processing code. Fix this.
311
312 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
313
314 commit 36f93484f96f79171dcecb67c5ef0c3de22531a6
315 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
316 Date: Fri Feb 7 10:29:51 2014 +0530
317
318 ath9k: Rename ar9003_hw_tx_iqcal_load_avg_2_passes
319
320 Use ar9003_hw_tx_iq_cal_outlier_detection instead.
321
322 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
323
324 commit 3af09a7f5d21dd5fd15b973ce6a91a575da30417
325 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
326 Date: Fri Feb 7 10:29:50 2014 +0530
327
328 ath9k: Check explicitly for IQ calibration
329
330 In chips like AR955x, the initvals contain the information
331 whether IQ calibration is to be done in the HW when an
332 AGC calibration is triggered. Check if IQ-CAL is enabled
333 in the initvals before flagging 'txiqcal_done' as true.
334
335 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
336
337 commit cb4969634b93c4643a32cc3fbd27d2b288b25771
338 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
339 Date: Fri Feb 7 10:29:49 2014 +0530
340
341 ath9k: Fix IQ cal post processing for SoC
342
343 Calibration data is not reused for SoC chips, so
344 call ar9003_hw_tx_iq_cal_post_proc() with the correct
345 argument. The 'is_reusable' flag is currently used
346 only for PC-OEM chips, but it makes things clearer to
347 specify it explicity.
348
349 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
350
351 commit e138e0ef9560c46ce93dbb22a728a57888e94d1c
352 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
353 Date: Mon Feb 3 13:31:37 2014 +0530
354
355 ath9k: Fix TX power calculation
356
357 The commit, "ath9k_hw: Fix incorrect Tx control power in AR9003 template"
358 fixed the incorrect values in the eeprom templates, but if
359 boards have already been calibrated with incorrect values,
360 they would still be using the wrong TX power. Fix this by assigning
361 a default value in such cases.
362
363 Cc: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
364 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
365
366 commit b9f268b5b01331c3c82179abca551429450e9417
367 Author: Michal Kazior <michal.kazior@tieto.com>
368 Date: Wed Jan 29 14:22:27 2014 +0100
369
370 cfg80211: consider existing DFS interfaces
371
372 It was possible to break interface combinations in
373 the following way:
374
375 combo 1: iftype = AP, num_ifaces = 2, num_chans = 2,
376 combo 2: iftype = AP, num_ifaces = 1, num_chans = 1, radar = HT20
377
378 With the above interface combinations it was
379 possible to:
380
381 step 1. start AP on DFS channel by matching combo 2
382 step 2. start AP on non-DFS channel by matching combo 1
383
384 This was possible beacuse (step 2) did not consider
385 if other interfaces require radar detection.
386
387 The patch changes how cfg80211 tracks channels -
388 instead of channel itself now a complete chandef
389 is stored.
390
391 Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
392 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
393
394 commit bc9c62f5f511cc395c62dbf4cdd437f23db53b28
395 Author: Antonio Quartulli <antonio@open-mesh.com>
396 Date: Wed Jan 29 17:53:43 2014 +0100
397
398 cfg80211: fix channel configuration in IBSS join
399
400 When receiving an IBSS_JOINED event select the BSS object
401 based on the {bssid, channel} couple rather than the bssid
402 only.
403 With the current approach if another cell having the same
404 BSSID (but using a different channel) exists then cfg80211
405 picks up the wrong BSS object.
406 The result is a mismatching channel configuration between
407 cfg80211 and the driver, that can lead to any sort of
408 problem.
409
410 The issue can be triggered by having an IBSS sitting on
411 given channel and then asking the driver to create a new
412 cell using the same BSSID but with a different frequency.
413 By passing the channel to cfg80211_get_bss() we can solve
414 this ambiguity and retrieve/create the correct BSS object.
415 All the users of cfg80211_ibss_joined() have been changed
416 accordingly.
417
418 Moreover WARN when cfg80211_ibss_joined() gets a NULL
419 channel as argument and remove a bogus call of the same
420 function in ath6kl (it does not make sense to call
421 cfg80211_ibss_joined() with a zero BSSID on ibss-leave).
422
423 Cc: Kalle Valo <kvalo@qca.qualcomm.com>
424 Cc: Arend van Spriel <arend@broadcom.com>
425 Cc: Bing Zhao <bzhao@marvell.com>
426 Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi>
427 Cc: libertas-dev@lists.infradead.org
428 Acked-by: Kalle Valo <kvalo@qca.qualcomm.com>
429 Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
430 [minor code cleanup in ath6kl]
431 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
432
433 commit 7e0c41cb41f215aba2c39b1c237bb4d42ec49a85
434 Author: Johannes Berg <johannes.berg@intel.com>
435 Date: Fri Jan 24 14:41:44 2014 +0100
436
437 mac80211: fix bufferable MMPDU RX handling
438
439 Action, disassoc and deauth frames are bufferable, and as such don't
440 have the PM bit in the frame control field reserved which means we
441 need to react to the bit when receiving in such a frame.
442
443 Fix this by introducing a new helper ieee80211_is_bufferable_mmpdu()
444 and using it for the RX path that currently ignores the PM bit in
445 any non-data frames for doze->wake transitions, but listens to it in
446 all frames for wake->doze transitions, both of which are wrong.
447
448 Also use the new helper in the TX path to clean up the code.
449
450 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
451
452 commit fc0df6d2343636e3f48a069330d5b972e3d8659d
453 Author: Janusz Dziedzic <janusz.dziedzic@tieto.com>
454 Date: Fri Jan 24 14:29:21 2014 +0100
455
456 cfg80211: set preset_chandef after channel switch
457
458 Set preset_chandef in channel switch notification.
459 In other case we will have old preset_chandef.
460
461 Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
462 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
463
464 commit cdec895e2344987ff171cece96e25d7407a3ebf6
465 Author: Simon Wunderlich <simon@open-mesh.com>
466 Date: Fri Jan 24 23:48:29 2014 +0100
467
468 mac80211: send ibss probe responses with noack flag
469
470 Responding to probe requests for scanning clients will often create
471 excessive retries, as it happens quite often that the scanning client
472 already left the channel. Therefore do it like hostapd and send probe
473 responses for wildcard SSID only once by using the noack flag.
474
475 Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
476 [fix typo & 'wildcard SSID' in commit log]
477 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
478
479 commit 0b865d1e6b9c05052adae9315df7cb195dc60c3b
480 Author: Luciano Coelho <luciano.coelho@intel.com>
481 Date: Tue Jan 28 17:09:08 2014 +0200
482
483 mac80211: ibss: remove unnecessary call to release channel
484
485 The ieee80211_vif_use_channel() function calls
486 ieee80211_vif_release_channel(), so there's no need to call it
487 explicitly in __ieee80211_sta_join_ibss().
488
489 Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
490 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
491
492 commit e1b6c17e971f0a51ff86c2dac2584c63cd999cd7
493 Author: Michal Kazior <michal.kazior@tieto.com>
494 Date: Wed Jan 29 07:56:21 2014 +0100
495
496 mac80211: add missing CSA locking
497
498 The patch adds a missing sdata lock and adds a few
499 lockdeps for easier maintenance.
500
501 Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
502 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
503
504 commit ad17ba7d14d225b109b73c177cd446afb8050598
505 Author: Michal Kazior <michal.kazior@tieto.com>
506 Date: Wed Jan 29 07:56:20 2014 +0100
507
508 mac80211: fix sdata->radar_required locking
509
510 radar_required setting wasn't protected by
511 local->mtx in some places. This should prevent
512 from scanning/radar detection/roc colliding.
513
514 Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
515 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
516
517 commit 5fcd5f1808813a3d9e502fd756e01bee8a79c85d
518 Author: Michal Kazior <michal.kazior@tieto.com>
519 Date: Wed Jan 29 07:56:19 2014 +0100
520
521 mac80211: move csa_active setting in STA CSA
522
523 The sdata->vif.csa_active could be left set after,
524 e.g. channel context constraints check fail in STA
525 mode leaving the interface in a strange state for
526 a brief period of time until it is disconnected.
527 This was harmless but ugly.
528
529 Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
530 Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
531 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
532
533 commit e486da4b7eed71821c6b4c1bb9ac62ffd3ab13e9
534 Author: Michal Kazior <michal.kazior@tieto.com>
535 Date: Wed Jan 29 07:56:18 2014 +0100
536
537 mac80211: fix possible memory leak on AP CSA failure
538
539 If CSA for AP interface failed and the interface
540 was not stopped afterwards another CSA request
541 would leak sdata->u.ap.next_beacon.
542
543 Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
544 Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
545 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
546
547 commit 3a77ba08940682bf3d52cf14f980337324af9d4a
548 Author: Johannes Berg <johannes.berg@intel.com>
549 Date: Sat Feb 1 00:33:29 2014 +0100
550
551 mac80211: fix fragmentation code, particularly for encryption
552
553 The "new" fragmentation code (since my rewrite almost 5 years ago)
554 erroneously sets skb->len rather than using skb_trim() to adjust
555 the length of the first fragment after copying out all the others.
556 This leaves the skb tail pointer pointing to after where the data
557 originally ended, and thus causes the encryption MIC to be written
558 at that point, rather than where it belongs: immediately after the
559 data.
560
561 The impact of this is that if software encryption is done, then
562 a) encryption doesn't work for the first fragment, the connection
563 becomes unusable as the first fragment will never be properly
564 verified at the receiver, the MIC is practically guaranteed to
565 be wrong
566 b) we leak up to 8 bytes of plaintext (!) of the packet out into
567 the air
568
569 This is only mitigated by the fact that many devices are capable
570 of doing encryption in hardware, in which case this can't happen
571 as the tail pointer is irrelevant in that case. Additionally,
572 fragmentation is not used very frequently and would normally have
573 to be configured manually.
574
575 Fix this by using skb_trim() properly.
576
577 Cc: stable@vger.kernel.org
578 Fixes: 2de8e0d999b8 ("mac80211: rewrite fragmentation")
579 Reported-by: Jouni Malinen <j@w1.fi>
580 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
581
582 commit de5f242e0c10e841017e37eb8c38974a642dbca8
583 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com>
584 Date: Tue Jan 28 06:21:59 2014 +0530
585
586 ath9k: Fix build error on ARM
587
588 Use mdelay instead of udelay to fix this error:
589
590 ERROR: "__bad_udelay" [drivers/net/wireless/ath/ath9k/ath9k_hw.ko] undefined!
591 make[1]: *** [__modpost] Error 1
592 make: *** [modules] Error 2
593
594 Reported-by: Josh Boyer <jwboyer@fedoraproject.org>
595 Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
596
597 commit 8e3ea7a51dfc61810fcefd947f6edcf61125252a
598 Author: Geert Uytterhoeven <geert@linux-m68k.org>
599 Date: Sun Jan 26 11:53:21 2014 +0100
600
601 ath9k: Fix uninitialized variable in ath9k_has_tx_pending()
602
603 drivers/net/wireless/ath/ath9k/main.c: In function ‘ath9k_has_tx_pending’:
604 drivers/net/wireless/ath/ath9k/main.c:1869: warning: ‘npend’ may be used uninitialized in this function
605
606 Introduced by commit 10e2318103f5941aa70c318afe34bc41f1b98529 ("ath9k:
607 optimize ath9k_flush").
608
609 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
610
611 commit a4a634a6937ebdd827fa58e8fcdb8ca49a3769f6
612 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
613 Date: Mon Jan 27 11:07:42 2014 +0200
614
615 mac80211: release the channel in error path in start_ap
616
617 When the driver cannot start the AP or when the assignement
618 of the beacon goes wrong, we need to unassign the vif.
619
620 Cc: stable@vger.kernel.org
621 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
622 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
623
624 commit dfb6889a75c601aedb7450b7e606668e77da6679
625 Author: Johannes Berg <johannes.berg@intel.com>
626 Date: Wed Jan 22 11:14:19 2014 +0200
627
628 cfg80211: send scan results from work queue
629
630 Due to the previous commit, when a scan finishes, it is in theory
631 possible to hit the following sequence:
632 1. interface starts being removed
633 2. scan is cancelled by driver and cfg80211 is notified
634 3. scan done work is scheduled
635 4. interface is removed completely, rdev->scan_req is freed,
636 event sent to userspace but scan done work remains pending
637 5. new scan is requested on another virtual interface
638 6. scan done work runs, freeing the still-running scan
639
640 To fix this situation, hang on to the scan done message and block
641 new scans while that is the case, and only send the message from
642 the work function, regardless of whether the scan_req is already
643 freed from interface removal. This makes step 5 above impossible
644 and changes step 6 to be
645 5. scan done work runs, sending the scan done message
646
647 As this can't work for wext, so we send the message immediately,
648 but this shouldn't be an issue since we still return -EBUSY.
649
650 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
651
652 commit 45b7ab41fc08627d9a8428cb413d5d84662a9707
653 Author: Johannes Berg <johannes.berg@intel.com>
654 Date: Wed Jan 22 11:14:18 2014 +0200
655
656 cfg80211: fix scan done race
657
658 When an interface/wdev is removed, any ongoing scan should be
659 cancelled by the driver. This will make it call cfg80211, which
660 only queues a work struct. If interface/wdev removal is quick
661 enough, this can leave the scan request pending and processed
662 only after the interface is gone, causing a use-after-free.
663
664 Fix this by making sure the scan request is not pending after
665 the interface is destroyed. We can't flush or cancel the work
666 item due to locking concerns, but when it'll run it shouldn't
667 find anything to do. This leaves a potential issue, if a new
668 scan gets requested before the work runs, it prematurely stops
669 the running scan, potentially causing another crash. I'll fix
670 that in the next patch.
671
672 This was particularly observed with P2P_DEVICE wdevs, likely
673 because freeing them is quicker than freeing netdevs.
674
675 Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
676 Fixes: 4a58e7c38443 ("cfg80211: don't "leak" uncompleted scans")
677 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
678
679 commit ae04fa489ab31b5a10d3cc8399f52761175d4321
680 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
681 Date: Thu Jan 23 14:28:16 2014 +0200
682
683 mac80211: avoid deadlock revealed by lockdep
684
685 sdata->u.ap.request_smps_work can’t be flushed synchronously
686 under wdev_lock(wdev) since ieee80211_request_smps_ap_work
687 itself locks the same lock.
688 While at it, reset the driver_smps_mode when the ap is
689 stopped to its default: OFF.
690
691 This solves:
692
693 ======================================================
694 [ INFO: possible circular locking dependency detected ]
695 3.12.0-ipeer+ #2 Tainted: G O
696 -------------------------------------------------------
697 rmmod/2867 is trying to acquire lock:
698 ((&sdata->u.ap.request_smps_work)){+.+...}, at: [<c105b8d0>] flush_work+0x0/0x90
699
700 but task is already holding lock:
701 (&wdev->mtx){+.+.+.}, at: [<f9b32626>] cfg80211_stop_ap+0x26/0x230 [cfg80211]
702
703 which lock already depends on the new lock.
704
705 the existing dependency chain (in reverse order) is:
706
707 -> #1 (&wdev->mtx){+.+.+.}:
708 [<c10aefa9>] lock_acquire+0x79/0xe0
709 [<c1607a1a>] mutex_lock_nested+0x4a/0x360
710 [<fb06288b>] ieee80211_request_smps_ap_work+0x2b/0x50 [mac80211]
711 [<c105cdd8>] process_one_work+0x198/0x450
712 [<c105d469>] worker_thread+0xf9/0x320
713 [<c10669ff>] kthread+0x9f/0xb0
714 [<c1613397>] ret_from_kernel_thread+0x1b/0x28
715
716 -> #0 ((&sdata->u.ap.request_smps_work)){+.+...}:
717 [<c10ae9df>] __lock_acquire+0x183f/0x1910
718 [<c10aefa9>] lock_acquire+0x79/0xe0
719 [<c105b917>] flush_work+0x47/0x90
720 [<c105d867>] __cancel_work_timer+0x67/0xe0
721 [<c105d90f>] cancel_work_sync+0xf/0x20
722 [<fb0765cc>] ieee80211_stop_ap+0x8c/0x340 [mac80211]
723 [<f9b3268c>] cfg80211_stop_ap+0x8c/0x230 [cfg80211]
724 [<f9b0d8f9>] cfg80211_leave+0x79/0x100 [cfg80211]
725 [<f9b0da72>] cfg80211_netdev_notifier_call+0xf2/0x4f0 [cfg80211]
726 [<c160f2c9>] notifier_call_chain+0x59/0x130
727 [<c106c6de>] __raw_notifier_call_chain+0x1e/0x30
728 [<c106c70f>] raw_notifier_call_chain+0x1f/0x30
729 [<c14f8213>] call_netdevice_notifiers_info+0x33/0x70
730 [<c14f8263>] call_netdevice_notifiers+0x13/0x20
731 [<c14f82a4>] __dev_close_many+0x34/0xb0
732 [<c14f83fe>] dev_close_many+0x6e/0xc0
733 [<c14f9c77>] rollback_registered_many+0xa7/0x1f0
734 [<c14f9dd4>] unregister_netdevice_many+0x14/0x60
735 [<fb06f4d9>] ieee80211_remove_interfaces+0xe9/0x170 [mac80211]
736 [<fb055116>] ieee80211_unregister_hw+0x56/0x110 [mac80211]
737 [<fa3e9396>] iwl_op_mode_mvm_stop+0x26/0xe0 [iwlmvm]
738 [<f9b9d8ca>] _iwl_op_mode_stop+0x3a/0x70 [iwlwifi]
739 [<f9b9d96f>] iwl_opmode_deregister+0x6f/0x90 [iwlwifi]
740 [<fa405179>] __exit_compat+0xd/0x19 [iwlmvm]
741 [<c10b8bf9>] SyS_delete_module+0x179/0x2b0
742 [<c1613421>] sysenter_do_call+0x12/0x32
743
744 Fixes: 687da132234f ("mac80211: implement SMPS for AP")
745 Cc: <stable@vger.kernel.org> [3.13]
746 Reported-by: Ilan Peer <ilan.peer@intel.com>
747 Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
748 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
749
750 commit 178b205e96217164fd7c30113464250d0b6f5eca
751 Author: Johannes Berg <johannes.berg@intel.com>
752 Date: Thu Jan 23 16:32:29 2014 +0100
753
754 cfg80211: re-enable 5/10 MHz support
755
756 Unfortunately I forgot this during the merge window, but the
757 patch seems small enough to go in as a fix. The userspace API
758 bug that was the reason for disabling it has long been fixed.
759
760 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
761
762 commit 110a1c79acda14edc83b7c8dc5af9c7ddd23eb61
763 Author: Pontus Fuchs <pontus.fuchs@gmail.com>
764 Date: Thu Jan 16 15:00:40 2014 +0100
765
766 nl80211: Reset split_start when netlink skb is exhausted
767
768 When the netlink skb is exhausted split_start is left set. In the
769 subsequent retry, with a larger buffer, the dump is continued from the
770 failing point instead of from the beginning.
771
772 This was causing my rt28xx based USB dongle to now show up when
773 running "iw list" with an old iw version without split dump support.
774
775 Cc: stable@vger.kernel.org
776 Fixes: 3713b4e364ef ("nl80211: allow splitting wiphy information in dumps")
777 Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com>
778 [avoid the entire workaround when state->split is set]
779 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
780
781 commit b4c31b45ffc7ef110fa9ecc34d7878fe7c5b9da4
782 Author: Eliad Peller <eliad@wizery.com>
783 Date: Sun Jan 12 11:06:37 2014 +0200
784
785 mac80211: move roc cookie assignment earlier
786
787 ieee80211_start_roc_work() might add a new roc
788 to existing roc, and tell cfg80211 it has already
789 started.
790
791 However, this might happen before the roc cookie
792 was set, resulting in REMAIN_ON_CHANNEL (started)
793 event with null cookie. Consequently, it can make
794 wpa_supplicant go out of sync.
795
796 Fix it by setting the roc cookie earlier.
797
798 Cc: stable@vger.kernel.org
799 Signed-off-by: Eliad Peller <eliad@wizery.com>
800 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
801
802 commit cfdc9157bfd7bcf88ab4dae08873a9907eba984c
803 Author: Johannes Berg <johannes.berg@intel.com>
804 Date: Fri Jan 24 14:06:29 2014 +0100
805
806 nl80211: send event when AP operation is stopped
807
808 There are a few cases, e.g. suspend, where an AP interface is
809 stopped by the kernel rather than by userspace request, most
810 commonly when suspending. To let userspace know about this,
811 send the NL80211_CMD_STOP_AP command as an event every time
812 an AP interface is stopped. This also happens when userspace
813 did in fact request the AP stop, but that's not a problem.
814
815 For full-MAC drivers this may need to be extended to also
816 cover cases where the device stopped the AP operation for
817 some reason, this a bit more complicated because then all
818 cfg80211 state also needs to be reset; such API is not part
819 of this patch.
820
821 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
822
823 commit d5d567eda7704f190379ca852a8f9a4112e3eee3
824 Author: Johannes Berg <johannes.berg@intel.com>
825 Date: Thu Jan 23 16:20:29 2014 +0100
826
827 mac80211: add length check in ieee80211_is_robust_mgmt_frame()
828
829 A few places weren't checking that the frame passed to the
830 function actually has enough data even though the function
831 clearly documents it must have a payload byte. Make this
832 safer by changing the function to take an skb and checking
833 the length inside. The old version is preserved for now as
834 the rtl* drivers use it and don't have a correct skb.
835
836 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
837
838 commit f8f6d212a047fc65c7d3442dfc038f65517236fc
839 Author: Johannes Berg <johannes.berg@intel.com>
840 Date: Fri Jan 24 10:53:53 2014 +0100
841
842 nl80211: fix scheduled scan RSSI matchset attribute confusion
843
844 The scheduled scan matchsets were intended to be a list of filters,
845 with the found BSS having to pass at least one of them to be passed
846 to the host. When the RSSI attribute was added, however, this was
847 broken and currently wpa_supplicant adds that attribute in its own
848 matchset; however, it doesn't intend that to mean that anything
849 that passes the RSSI filter should be passed to the host, instead
850 it wants it to mean that everything needs to also have higher RSSI.
851
852 This is semantically problematic because we have a list of filters
853 like [ SSID1, SSID2, SSID3, RSSI ] with no real indication which
854 one should be OR'ed and which one AND'ed.
855
856 To fix this, move the RSSI filter attribute into each matchset. As
857 we need to stay backward compatible, treat a matchset with only the
858 RSSI attribute as a "default RSSI filter" for all other matchsets,
859 but only if there are other matchsets (an RSSI-only matchset by
860 itself is still desirable.)
861
862 To make driver implementation easier, keep a global min_rssi_thold
863 for the entire request as well. The only affected driver is ath6kl.
864
865 I found this when I looked into the code after Raja Mani submitted
866 a patch fixing the n_match_sets calculation to disregard the RSSI,
867 but that patch didn't address the semantic issue.
868
869 Reported-by: Raja Mani <rmani@qti.qualcomm.com>
870 Acked-by: Luciano Coelho <luciano.coelho@intel.com>
871 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
872
873 commit de553e8545e65a6dc4e45f43df7e1443d4291922
874 Author: Johannes Berg <johannes.berg@intel.com>
875 Date: Fri Jan 24 10:17:47 2014 +0100
876
877 nl80211: check nla_parse() return values
878
879 If there's a policy, then nla_parse() return values must be
880 checked, otherwise the policy is useless and there's nothing
881 that ensures the attributes are actually what we expect them
882 to be.
883
884 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
885
886 commit 652204a0733e9e1c54661d6f9d36e2e1e3b22bb1
887 Author: Karl Beldan <karl.beldan@rivierawaves.com>
888 Date: Thu Jan 23 20:06:34 2014 +0100
889
890 mac80211: send {ADD,DEL}BA on AC_VO like other mgmt frames, as per spec
891
892 ATM, {ADD,DEL}BA and BAR frames are sent on the AC matching the TID of
893 the BA parameters. In the discussion [1] about this patch, Johannes
894 recalled that it fixed some races with the DELBA and indeed this
895 behavior was introduced in [2].
896 While [2] is right for the BARs, the part queueing the {ADD,DEL}BAs on
897 their BA params TID AC violates the spec and is more a workaround for
898 some drivers. Helmut expressed some concerns wrt such drivers, in
899 particular DELBAs in rt2x00.
900
901 ATM, DELBAs are sent after a driver has called (hence "purposely")
902 ieee80211_start_tx_ba_cb_irqsafe and Johannes and Emmanuel gave some
903 details wrt intentions behind the split of the IEEE80211_AMPDU_TX_STOP_*
904 given to the driver ampdu_action supposed to call this function, which
905 could prove handy to people trying to do the right thing in faulty
906 drivers (if their fw/hw don't get in their way).
907
908 [1] http://mid.gmane.org/1390391564-18481-1-git-send-email-karl.beldan@gmail.com
909 [2] Commit: cf6bb79ad828 ("mac80211: Use appropriate TID for sending BAR, ADDBA and DELBA frames")
910
911 Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com>
912 Cc: Helmut Schaa <helmut.schaa@googlemail.com>
913 Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
914 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
915 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
916 +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
917 @@ -790,7 +790,7 @@ void ath6kl_cfg80211_connect_event(struc
918 if (nw_type & ADHOC_NETWORK) {
919 ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "ad-hoc %s selected\n",
920 nw_type & ADHOC_CREATOR ? "creator" : "joiner");
921 - cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL);
922 + cfg80211_ibss_joined(vif->ndev, bssid, chan, GFP_KERNEL);
923 cfg80211_put_bss(ar->wiphy, bss);
924 return;
925 }
926 @@ -861,13 +861,9 @@ void ath6kl_cfg80211_disconnect_event(st
927 }
928
929 if (vif->nw_type & ADHOC_NETWORK) {
930 - if (vif->wdev.iftype != NL80211_IFTYPE_ADHOC) {
931 + if (vif->wdev.iftype != NL80211_IFTYPE_ADHOC)
932 ath6kl_dbg(ATH6KL_DBG_WLAN_CFG,
933 "%s: ath6k not in ibss mode\n", __func__);
934 - return;
935 - }
936 - memset(bssid, 0, ETH_ALEN);
937 - cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL);
938 return;
939 }
940
941 @@ -3256,6 +3252,15 @@ static int ath6kl_cfg80211_sscan_start(s
942 struct ath6kl_vif *vif = netdev_priv(dev);
943 u16 interval;
944 int ret, rssi_thold;
945 + int n_match_sets = request->n_match_sets;
946 +
947 + /*
948 + * If there's a matchset w/o an SSID, then assume it's just for
949 + * the RSSI (nothing else is currently supported) and ignore it.
950 + * The device only supports a global RSSI filter that we set below.
951 + */
952 + if (n_match_sets == 1 && !request->match_sets[0].ssid.ssid_len)
953 + n_match_sets = 0;
954
955 if (ar->state != ATH6KL_STATE_ON)
956 return -EIO;
957 @@ -3268,11 +3273,11 @@ static int ath6kl_cfg80211_sscan_start(s
958 ret = ath6kl_set_probed_ssids(ar, vif, request->ssids,
959 request->n_ssids,
960 request->match_sets,
961 - request->n_match_sets);
962 + n_match_sets);
963 if (ret < 0)
964 return ret;
965
966 - if (!request->n_match_sets) {
967 + if (!n_match_sets) {
968 ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx,
969 ALL_BSS_FILTER, 0);
970 if (ret < 0)
971 @@ -3286,12 +3291,12 @@ static int ath6kl_cfg80211_sscan_start(s
972
973 if (test_bit(ATH6KL_FW_CAPABILITY_RSSI_SCAN_THOLD,
974 ar->fw_capabilities)) {
975 - if (request->rssi_thold <= NL80211_SCAN_RSSI_THOLD_OFF)
976 + if (request->min_rssi_thold <= NL80211_SCAN_RSSI_THOLD_OFF)
977 rssi_thold = 0;
978 - else if (request->rssi_thold < -127)
979 + else if (request->min_rssi_thold < -127)
980 rssi_thold = -127;
981 else
982 - rssi_thold = request->rssi_thold;
983 + rssi_thold = request->min_rssi_thold;
984
985 ret = ath6kl_wmi_set_rssi_filter_cmd(ar->wmi, vif->fw_vif_idx,
986 rssi_thold);
987 --- a/drivers/net/wireless/ath/ath9k/hw.c
988 +++ b/drivers/net/wireless/ath/ath9k/hw.c
989 @@ -1316,7 +1316,7 @@ static bool ath9k_hw_set_reset(struct at
990 if (AR_SREV_9300_20_OR_LATER(ah))
991 udelay(50);
992 else if (AR_SREV_9100(ah))
993 - udelay(10000);
994 + mdelay(10);
995 else
996 udelay(100);
997
998 @@ -2051,9 +2051,8 @@ static bool ath9k_hw_set_power_awake(str
999
1000 REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
1001 AR_RTC_FORCE_WAKE_EN);
1002 -
1003 if (AR_SREV_9100(ah))
1004 - udelay(10000);
1005 + mdelay(10);
1006 else
1007 udelay(50);
1008
1009 --- a/drivers/net/wireless/ath/ath9k/main.c
1010 +++ b/drivers/net/wireless/ath/ath9k/main.c
1011 @@ -1866,7 +1866,7 @@ static void ath9k_set_coverage_class(str
1012
1013 static bool ath9k_has_tx_pending(struct ath_softc *sc)
1014 {
1015 - int i, npend;
1016 + int i, npend = 0;
1017
1018 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
1019 if (!ATH_TXQ_SETUP(sc, i))
1020 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c
1021 +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
1022 @@ -595,6 +595,9 @@ static void iwl_scan_offload_build_ssid(
1023 * config match list.
1024 */
1025 for (i = 0; i < req->n_match_sets && i < PROBE_OPTION_MAX; i++) {
1026 + /* skip empty SSID matchsets */
1027 + if (!req->match_sets[i].ssid.ssid_len)
1028 + continue;
1029 scan->direct_scan[i].id = WLAN_EID_SSID;
1030 scan->direct_scan[i].len = req->match_sets[i].ssid.ssid_len;
1031 memcpy(scan->direct_scan[i].ssid, req->match_sets[i].ssid.ssid,
1032 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
1033 +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c
1034 @@ -452,7 +452,7 @@ bool rtl88ee_rx_query_desc(struct ieee80
1035 /* During testing, hdr was NULL */
1036 return false;
1037 }
1038 - if ((ieee80211_is_robust_mgmt_frame(hdr)) &&
1039 + if ((_ieee80211_is_robust_mgmt_frame(hdr)) &&
1040 (ieee80211_has_protected(hdr->frame_control)))
1041 rx_status->flag &= ~RX_FLAG_DECRYPTED;
1042 else
1043 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
1044 +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
1045 @@ -393,7 +393,7 @@ bool rtl92ce_rx_query_desc(struct ieee80
1046 /* In testing, hdr was NULL here */
1047 return false;
1048 }
1049 - if ((ieee80211_is_robust_mgmt_frame(hdr)) &&
1050 + if ((_ieee80211_is_robust_mgmt_frame(hdr)) &&
1051 (ieee80211_has_protected(hdr->frame_control)))
1052 rx_status->flag &= ~RX_FLAG_DECRYPTED;
1053 else
1054 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
1055 +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c
1056 @@ -310,7 +310,7 @@ bool rtl92se_rx_query_desc(struct ieee80
1057 /* during testing, hdr was NULL here */
1058 return false;
1059 }
1060 - if ((ieee80211_is_robust_mgmt_frame(hdr)) &&
1061 + if ((_ieee80211_is_robust_mgmt_frame(hdr)) &&
1062 (ieee80211_has_protected(hdr->frame_control)))
1063 rx_status->flag &= ~RX_FLAG_DECRYPTED;
1064 else
1065 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
1066 +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c
1067 @@ -334,7 +334,7 @@ bool rtl8723ae_rx_query_desc(struct ieee
1068 /* during testing, hdr could be NULL here */
1069 return false;
1070 }
1071 - if ((ieee80211_is_robust_mgmt_frame(hdr)) &&
1072 + if ((_ieee80211_is_robust_mgmt_frame(hdr)) &&
1073 (ieee80211_has_protected(hdr->frame_control)))
1074 rx_status->flag &= ~RX_FLAG_DECRYPTED;
1075 else
1076 --- a/include/linux/ieee80211.h
1077 +++ b/include/linux/ieee80211.h
1078 @@ -597,6 +597,20 @@ static inline int ieee80211_is_qos_nullf
1079 }
1080
1081 /**
1082 + * ieee80211_is_bufferable_mmpdu - check if frame is bufferable MMPDU
1083 + * @fc: frame control field in little-endian byteorder
1084 + */
1085 +static inline bool ieee80211_is_bufferable_mmpdu(__le16 fc)
1086 +{
1087 + /* IEEE 802.11-2012, definition of "bufferable management frame";
1088 + * note that this ignores the IBSS special case. */
1089 + return ieee80211_is_mgmt(fc) &&
1090 + (ieee80211_is_action(fc) ||
1091 + ieee80211_is_disassoc(fc) ||
1092 + ieee80211_is_deauth(fc));
1093 +}
1094 +
1095 +/**
1096 * ieee80211_is_first_frag - check if IEEE80211_SCTL_FRAG is not set
1097 * @seq_ctrl: frame sequence control bytes in little-endian byteorder
1098 */
1099 @@ -2192,10 +2206,10 @@ static inline u8 *ieee80211_get_DA(struc
1100 }
1101
1102 /**
1103 - * ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
1104 + * _ieee80211_is_robust_mgmt_frame - check if frame is a robust management frame
1105 * @hdr: the frame (buffer must include at least the first octet of payload)
1106 */
1107 -static inline bool ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
1108 +static inline bool _ieee80211_is_robust_mgmt_frame(struct ieee80211_hdr *hdr)
1109 {
1110 if (ieee80211_is_disassoc(hdr->frame_control) ||
1111 ieee80211_is_deauth(hdr->frame_control))
1112 @@ -2224,6 +2238,17 @@ static inline bool ieee80211_is_robust_m
1113 }
1114
1115 /**
1116 + * ieee80211_is_robust_mgmt_frame - check if skb contains a robust mgmt frame
1117 + * @skb: the skb containing the frame, length will be checked
1118 + */
1119 +static inline bool ieee80211_is_robust_mgmt_frame(struct sk_buff *skb)
1120 +{
1121 + if (skb->len < 25)
1122 + return false;
1123 + return _ieee80211_is_robust_mgmt_frame((void *)skb->data);
1124 +}
1125 +
1126 +/**
1127 * ieee80211_is_public_action - check if frame is a public action frame
1128 * @hdr: the frame
1129 * @len: length of the frame
1130 --- a/include/net/cfg80211.h
1131 +++ b/include/net/cfg80211.h
1132 @@ -1395,9 +1395,11 @@ struct cfg80211_scan_request {
1133 * struct cfg80211_match_set - sets of attributes to match
1134 *
1135 * @ssid: SSID to be matched
1136 + * @rssi_thold: don't report scan results below this threshold (in s32 dBm)
1137 */
1138 struct cfg80211_match_set {
1139 struct cfg80211_ssid ssid;
1140 + s32 rssi_thold;
1141 };
1142
1143 /**
1144 @@ -1420,7 +1422,8 @@ struct cfg80211_match_set {
1145 * @dev: the interface
1146 * @scan_start: start time of the scheduled scan
1147 * @channels: channels to scan
1148 - * @rssi_thold: don't report scan results below this threshold (in s32 dBm)
1149 + * @min_rssi_thold: for drivers only supporting a single threshold, this
1150 + * contains the minimum over all matchsets
1151 */
1152 struct cfg80211_sched_scan_request {
1153 struct cfg80211_ssid *ssids;
1154 @@ -1433,7 +1436,7 @@ struct cfg80211_sched_scan_request {
1155 u32 flags;
1156 struct cfg80211_match_set *match_sets;
1157 int n_match_sets;
1158 - s32 rssi_thold;
1159 + s32 min_rssi_thold;
1160
1161 /* internal */
1162 struct wiphy *wiphy;
1163 @@ -3130,8 +3133,8 @@ struct cfg80211_cached_keys;
1164 * @identifier: (private) Identifier used in nl80211 to identify this
1165 * wireless device if it has no netdev
1166 * @current_bss: (private) Used by the internal configuration code
1167 - * @channel: (private) Used by the internal configuration code to track
1168 - * the user-set AP, monitor and WDS channel
1169 + * @chandef: (private) Used by the internal configuration code to track
1170 + * the user-set channel definition.
1171 * @preset_chandef: (private) Used by the internal configuration code to
1172 * track the channel to be used for AP later
1173 * @bssid: (private) Used by the internal configuration code
1174 @@ -3195,9 +3198,7 @@ struct wireless_dev {
1175
1176 struct cfg80211_internal_bss *current_bss; /* associated / joined */
1177 struct cfg80211_chan_def preset_chandef;
1178 -
1179 - /* for AP and mesh channel tracking */
1180 - struct ieee80211_channel *channel;
1181 + struct cfg80211_chan_def chandef;
1182
1183 bool ibss_fixed;
1184 bool ibss_dfs_possible;
1185 @@ -3879,6 +3880,7 @@ void cfg80211_michael_mic_failure(struct
1186 *
1187 * @dev: network device
1188 * @bssid: the BSSID of the IBSS joined
1189 + * @channel: the channel of the IBSS joined
1190 * @gfp: allocation flags
1191 *
1192 * This function notifies cfg80211 that the device joined an IBSS or
1193 @@ -3888,7 +3890,8 @@ void cfg80211_michael_mic_failure(struct
1194 * with the locally generated beacon -- this guarantees that there is
1195 * always a scan result for this IBSS. cfg80211 will handle the rest.
1196 */
1197 -void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp);
1198 +void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
1199 + struct ieee80211_channel *channel, gfp_t gfp);
1200
1201 /**
1202 * cfg80211_notify_new_candidate - notify cfg80211 of a new mesh peer candidate
1203 --- a/include/uapi/linux/nl80211.h
1204 +++ b/include/uapi/linux/nl80211.h
1205 @@ -2442,9 +2442,15 @@ enum nl80211_reg_rule_attr {
1206 * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
1207 * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
1208 * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
1209 - * only report BSS with matching SSID.
1210 + * only report BSS with matching SSID.
1211 * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
1212 - * BSS in scan results. Filtering is turned off if not specified.
1213 + * BSS in scan results. Filtering is turned off if not specified. Note that
1214 + * if this attribute is in a match set of its own, then it is treated as
1215 + * the default value for all matchsets with an SSID, rather than being a
1216 + * matchset of its own without an RSSI filter. This is due to problems with
1217 + * how this API was implemented in the past. Also, due to the same problem,
1218 + * the only way to create a matchset with only an RSSI filter (with this
1219 + * attribute) is if there's only a single matchset with the RSSI attribute.
1220 * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
1221 * attribute number currently defined
1222 * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
1223 --- a/net/mac80211/agg-tx.c
1224 +++ b/net/mac80211/agg-tx.c
1225 @@ -107,7 +107,7 @@ static void ieee80211_send_addba_request
1226 mgmt->u.action.u.addba_req.start_seq_num =
1227 cpu_to_le16(start_seq_num << 4);
1228
1229 - ieee80211_tx_skb_tid(sdata, skb, tid);
1230 + ieee80211_tx_skb(sdata, skb);
1231 }
1232
1233 void ieee80211_send_bar(struct ieee80211_vif *vif, u8 *ra, u16 tid, u16 ssn)
1234 --- a/net/mac80211/cfg.c
1235 +++ b/net/mac80211/cfg.c
1236 @@ -970,9 +970,9 @@ static int ieee80211_start_ap(struct wip
1237 /* TODO: make hostapd tell us what it wants */
1238 sdata->smps_mode = IEEE80211_SMPS_OFF;
1239 sdata->needed_rx_chains = sdata->local->rx_chains;
1240 - sdata->radar_required = params->radar_required;
1241
1242 mutex_lock(&local->mtx);
1243 + sdata->radar_required = params->radar_required;
1244 err = ieee80211_vif_use_channel(sdata, &params->chandef,
1245 IEEE80211_CHANCTX_SHARED);
1246 mutex_unlock(&local->mtx);
1247 @@ -1021,8 +1021,10 @@ static int ieee80211_start_ap(struct wip
1248 IEEE80211_P2P_OPPPS_ENABLE_BIT;
1249
1250 err = ieee80211_assign_beacon(sdata, &params->beacon);
1251 - if (err < 0)
1252 + if (err < 0) {
1253 + ieee80211_vif_release_channel(sdata);
1254 return err;
1255 + }
1256 changed |= err;
1257
1258 err = drv_start_ap(sdata->local, sdata);
1259 @@ -1032,6 +1034,7 @@ static int ieee80211_start_ap(struct wip
1260 if (old)
1261 kfree_rcu(old, rcu_head);
1262 RCU_INIT_POINTER(sdata->u.ap.beacon, NULL);
1263 + ieee80211_vif_release_channel(sdata);
1264 return err;
1265 }
1266
1267 @@ -1053,6 +1056,7 @@ static int ieee80211_change_beacon(struc
1268 int err;
1269
1270 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1271 + sdata_assert_lock(sdata);
1272
1273 /* don't allow changing the beacon while CSA is in place - offset
1274 * of channel switch counter may change
1275 @@ -1080,6 +1084,8 @@ static int ieee80211_stop_ap(struct wiph
1276 struct probe_resp *old_probe_resp;
1277 struct cfg80211_chan_def chandef;
1278
1279 + sdata_assert_lock(sdata);
1280 +
1281 old_beacon = sdata_dereference(sdata->u.ap.beacon, sdata);
1282 if (!old_beacon)
1283 return -ENOENT;
1284 @@ -1090,8 +1096,6 @@ static int ieee80211_stop_ap(struct wiph
1285 kfree(sdata->u.ap.next_beacon);
1286 sdata->u.ap.next_beacon = NULL;
1287
1288 - cancel_work_sync(&sdata->u.ap.request_smps_work);
1289 -
1290 /* turn off carrier for this interface and dependent VLANs */
1291 list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
1292 netif_carrier_off(vlan->dev);
1293 @@ -1103,6 +1107,7 @@ static int ieee80211_stop_ap(struct wiph
1294 kfree_rcu(old_beacon, rcu_head);
1295 if (old_probe_resp)
1296 kfree_rcu(old_probe_resp, rcu_head);
1297 + sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF;
1298
1299 __sta_info_flush(sdata, true);
1300 ieee80211_free_keys(sdata, true);
1301 @@ -2638,6 +2643,24 @@ static int ieee80211_start_roc_work(stru
1302 INIT_DELAYED_WORK(&roc->work, ieee80211_sw_roc_work);
1303 INIT_LIST_HEAD(&roc->dependents);
1304
1305 + /*
1306 + * cookie is either the roc cookie (for normal roc)
1307 + * or the SKB (for mgmt TX)
1308 + */
1309 + if (!txskb) {
1310 + /* local->mtx protects this */
1311 + local->roc_cookie_counter++;
1312 + roc->cookie = local->roc_cookie_counter;
1313 + /* wow, you wrapped 64 bits ... more likely a bug */
1314 + if (WARN_ON(roc->cookie == 0)) {
1315 + roc->cookie = 1;
1316 + local->roc_cookie_counter++;
1317 + }
1318 + *cookie = roc->cookie;
1319 + } else {
1320 + *cookie = (unsigned long)txskb;
1321 + }
1322 +
1323 /* if there's one pending or we're scanning, queue this one */
1324 if (!list_empty(&local->roc_list) ||
1325 local->scanning || local->radar_detect_enabled)
1326 @@ -2772,24 +2795,6 @@ static int ieee80211_start_roc_work(stru
1327 if (!queued)
1328 list_add_tail(&roc->list, &local->roc_list);
1329
1330 - /*
1331 - * cookie is either the roc cookie (for normal roc)
1332 - * or the SKB (for mgmt TX)
1333 - */
1334 - if (!txskb) {
1335 - /* local->mtx protects this */
1336 - local->roc_cookie_counter++;
1337 - roc->cookie = local->roc_cookie_counter;
1338 - /* wow, you wrapped 64 bits ... more likely a bug */
1339 - if (WARN_ON(roc->cookie == 0)) {
1340 - roc->cookie = 1;
1341 - local->roc_cookie_counter++;
1342 - }
1343 - *cookie = roc->cookie;
1344 - } else {
1345 - *cookie = (unsigned long)txskb;
1346 - }
1347 -
1348 return 0;
1349 }
1350
1351 @@ -3004,8 +3009,10 @@ void ieee80211_csa_finalize_work(struct
1352 if (!ieee80211_sdata_running(sdata))
1353 goto unlock;
1354
1355 - sdata->radar_required = sdata->csa_radar_required;
1356 + sdata_assert_lock(sdata);
1357 +
1358 mutex_lock(&local->mtx);
1359 + sdata->radar_required = sdata->csa_radar_required;
1360 err = ieee80211_vif_change_channel(sdata, &changed);
1361 mutex_unlock(&local->mtx);
1362 if (WARN_ON(err < 0))
1363 @@ -3022,13 +3029,13 @@ void ieee80211_csa_finalize_work(struct
1364 switch (sdata->vif.type) {
1365 case NL80211_IFTYPE_AP:
1366 err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon);
1367 + kfree(sdata->u.ap.next_beacon);
1368 + sdata->u.ap.next_beacon = NULL;
1369 +
1370 if (err < 0)
1371 goto unlock;
1372
1373 changed |= err;
1374 - kfree(sdata->u.ap.next_beacon);
1375 - sdata->u.ap.next_beacon = NULL;
1376 -
1377 ieee80211_bss_info_change_notify(sdata, err);
1378 break;
1379 case NL80211_IFTYPE_ADHOC:
1380 @@ -3066,7 +3073,7 @@ int ieee80211_channel_switch(struct wiph
1381 struct ieee80211_if_mesh __maybe_unused *ifmsh;
1382 int err, num_chanctx;
1383
1384 - lockdep_assert_held(&sdata->wdev.mtx);
1385 + sdata_assert_lock(sdata);
1386
1387 if (!list_empty(&local->roc_list) || local->scanning)
1388 return -EBUSY;
1389 --- a/net/mac80211/ht.c
1390 +++ b/net/mac80211/ht.c
1391 @@ -375,7 +375,7 @@ void ieee80211_send_delba(struct ieee802
1392 mgmt->u.action.u.delba.params = cpu_to_le16(params);
1393 mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code);
1394
1395 - ieee80211_tx_skb_tid(sdata, skb, tid);
1396 + ieee80211_tx_skb(sdata, skb);
1397 }
1398
1399 void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
1400 @@ -466,7 +466,9 @@ void ieee80211_request_smps_ap_work(stru
1401 u.ap.request_smps_work);
1402
1403 sdata_lock(sdata);
1404 - __ieee80211_request_smps_ap(sdata, sdata->u.ap.driver_smps_mode);
1405 + if (sdata_dereference(sdata->u.ap.beacon, sdata))
1406 + __ieee80211_request_smps_ap(sdata,
1407 + sdata->u.ap.driver_smps_mode);
1408 sdata_unlock(sdata);
1409 }
1410
1411 --- a/net/mac80211/iface.c
1412 +++ b/net/mac80211/iface.c
1413 @@ -770,12 +770,19 @@ static void ieee80211_do_stop(struct iee
1414
1415 ieee80211_roc_purge(local, sdata);
1416
1417 - if (sdata->vif.type == NL80211_IFTYPE_STATION)
1418 + switch (sdata->vif.type) {
1419 + case NL80211_IFTYPE_STATION:
1420 ieee80211_mgd_stop(sdata);
1421 -
1422 - if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
1423 + break;
1424 + case NL80211_IFTYPE_ADHOC:
1425 ieee80211_ibss_stop(sdata);
1426 -
1427 + break;
1428 + case NL80211_IFTYPE_AP:
1429 + cancel_work_sync(&sdata->u.ap.request_smps_work);
1430 + break;
1431 + default:
1432 + break;
1433 + }
1434
1435 /*
1436 * Remove all stations associated with this interface.
1437 @@ -827,7 +834,9 @@ static void ieee80211_do_stop(struct iee
1438 cancel_work_sync(&local->dynamic_ps_enable_work);
1439
1440 cancel_work_sync(&sdata->recalc_smps);
1441 + sdata_lock(sdata);
1442 sdata->vif.csa_active = false;
1443 + sdata_unlock(sdata);
1444 cancel_work_sync(&sdata->csa_finalize_work);
1445
1446 cancel_delayed_work_sync(&sdata->dfs_cac_timer_work);
1447 --- a/net/mac80211/rx.c
1448 +++ b/net/mac80211/rx.c
1449 @@ -599,10 +599,10 @@ static int ieee80211_is_unicast_robust_m
1450 {
1451 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
1452
1453 - if (skb->len < 24 || is_multicast_ether_addr(hdr->addr1))
1454 + if (is_multicast_ether_addr(hdr->addr1))
1455 return 0;
1456
1457 - return ieee80211_is_robust_mgmt_frame(hdr);
1458 + return ieee80211_is_robust_mgmt_frame(skb);
1459 }
1460
1461
1462 @@ -610,10 +610,10 @@ static int ieee80211_is_multicast_robust
1463 {
1464 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
1465
1466 - if (skb->len < 24 || !is_multicast_ether_addr(hdr->addr1))
1467 + if (!is_multicast_ether_addr(hdr->addr1))
1468 return 0;
1469
1470 - return ieee80211_is_robust_mgmt_frame(hdr);
1471 + return ieee80211_is_robust_mgmt_frame(skb);
1472 }
1473
1474
1475 @@ -626,7 +626,7 @@ static int ieee80211_get_mmie_keyidx(str
1476 if (skb->len < 24 + sizeof(*mmie) || !is_multicast_ether_addr(hdr->da))
1477 return -1;
1478
1479 - if (!ieee80211_is_robust_mgmt_frame((struct ieee80211_hdr *) hdr))
1480 + if (!ieee80211_is_robust_mgmt_frame(skb))
1481 return -1; /* not a robust management frame */
1482
1483 mmie = (struct ieee80211_mmie *)
1484 @@ -1128,6 +1128,13 @@ static void sta_ps_end(struct sta_info *
1485 sta->sta.addr, sta->sta.aid);
1486
1487 if (test_sta_flag(sta, WLAN_STA_PS_DRIVER)) {
1488 + /*
1489 + * Clear the flag only if the other one is still set
1490 + * so that the TX path won't start TX'ing new frames
1491 + * directly ... In the case that the driver flag isn't
1492 + * set ieee80211_sta_ps_deliver_wakeup() will clear it.
1493 + */
1494 + clear_sta_flag(sta, WLAN_STA_PS_STA);
1495 ps_dbg(sta->sdata, "STA %pM aid %d driver-ps-blocked\n",
1496 sta->sta.addr, sta->sta.aid);
1497 return;
1498 @@ -1311,18 +1318,15 @@ ieee80211_rx_h_sta_process(struct ieee80
1499 !ieee80211_has_morefrags(hdr->frame_control) &&
1500 !(status->rx_flags & IEEE80211_RX_DEFERRED_RELEASE) &&
1501 (rx->sdata->vif.type == NL80211_IFTYPE_AP ||
1502 - rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) {
1503 + rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) &&
1504 + /* PM bit is only checked in frames where it isn't reserved,
1505 + * in AP mode it's reserved in non-bufferable management frames
1506 + * (cf. IEEE 802.11-2012 8.2.4.1.7 Power Management field)
1507 + */
1508 + (!ieee80211_is_mgmt(hdr->frame_control) ||
1509 + ieee80211_is_bufferable_mmpdu(hdr->frame_control))) {
1510 if (test_sta_flag(sta, WLAN_STA_PS_STA)) {
1511 - /*
1512 - * Ignore doze->wake transitions that are
1513 - * indicated by non-data frames, the standard
1514 - * is unclear here, but for example going to
1515 - * PS mode and then scanning would cause a
1516 - * doze->wake transition for the probe request,
1517 - * and that is clearly undesirable.
1518 - */
1519 - if (ieee80211_is_data(hdr->frame_control) &&
1520 - !ieee80211_has_pm(hdr->frame_control))
1521 + if (!ieee80211_has_pm(hdr->frame_control))
1522 sta_ps_end(sta);
1523 } else {
1524 if (ieee80211_has_pm(hdr->frame_control))
1525 @@ -1845,8 +1849,7 @@ static int ieee80211_drop_unencrypted_mg
1526 * having configured keys.
1527 */
1528 if (unlikely(ieee80211_is_action(fc) && !rx->key &&
1529 - ieee80211_is_robust_mgmt_frame(
1530 - (struct ieee80211_hdr *) rx->skb->data)))
1531 + ieee80211_is_robust_mgmt_frame(rx->skb)))
1532 return -EACCES;
1533 }
1534
1535 --- a/net/mac80211/tx.c
1536 +++ b/net/mac80211/tx.c
1537 @@ -452,8 +452,7 @@ static int ieee80211_use_mfp(__le16 fc,
1538 if (sta == NULL || !test_sta_flag(sta, WLAN_STA_MFP))
1539 return 0;
1540
1541 - if (!ieee80211_is_robust_mgmt_frame((struct ieee80211_hdr *)
1542 - skb->data))
1543 + if (!ieee80211_is_robust_mgmt_frame(skb))
1544 return 0;
1545
1546 return 1;
1547 @@ -478,6 +477,20 @@ ieee80211_tx_h_unicast_ps_buf(struct iee
1548 sta->sta.addr, sta->sta.aid, ac);
1549 if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER)
1550 purge_old_ps_buffers(tx->local);
1551 +
1552 + /* sync with ieee80211_sta_ps_deliver_wakeup */
1553 + spin_lock(&sta->ps_lock);
1554 + /*
1555 + * STA woke up the meantime and all the frames on ps_tx_buf have
1556 + * been queued to pending queue. No reordering can happen, go
1557 + * ahead and Tx the packet.
1558 + */
1559 + if (!test_sta_flag(sta, WLAN_STA_PS_STA) &&
1560 + !test_sta_flag(sta, WLAN_STA_PS_DRIVER)) {
1561 + spin_unlock(&sta->ps_lock);
1562 + return TX_CONTINUE;
1563 + }
1564 +
1565 if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) {
1566 struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]);
1567 ps_dbg(tx->sdata,
1568 @@ -492,6 +505,7 @@ ieee80211_tx_h_unicast_ps_buf(struct iee
1569 info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING;
1570 info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS;
1571 skb_queue_tail(&sta->ps_tx_buf[ac], tx->skb);
1572 + spin_unlock(&sta->ps_lock);
1573
1574 if (!timer_pending(&local->sta_cleanup))
1575 mod_timer(&local->sta_cleanup,
1576 @@ -525,9 +539,7 @@ ieee80211_tx_h_ps_buf(struct ieee80211_t
1577
1578 /* only deauth, disassoc and action are bufferable MMPDUs */
1579 if (ieee80211_is_mgmt(hdr->frame_control) &&
1580 - !ieee80211_is_deauth(hdr->frame_control) &&
1581 - !ieee80211_is_disassoc(hdr->frame_control) &&
1582 - !ieee80211_is_action(hdr->frame_control)) {
1583 + !ieee80211_is_bufferable_mmpdu(hdr->frame_control)) {
1584 if (tx->flags & IEEE80211_TX_UNICAST)
1585 info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER;
1586 return TX_CONTINUE;
1587 @@ -567,7 +579,7 @@ ieee80211_tx_h_select_key(struct ieee802
1588 tx->key = key;
1589 else if (ieee80211_is_mgmt(hdr->frame_control) &&
1590 is_multicast_ether_addr(hdr->addr1) &&
1591 - ieee80211_is_robust_mgmt_frame(hdr) &&
1592 + ieee80211_is_robust_mgmt_frame(tx->skb) &&
1593 (key = rcu_dereference(tx->sdata->default_mgmt_key)))
1594 tx->key = key;
1595 else if (is_multicast_ether_addr(hdr->addr1) &&
1596 @@ -582,12 +594,12 @@ ieee80211_tx_h_select_key(struct ieee802
1597 tx->key = NULL;
1598 else if (tx->skb->protocol == tx->sdata->control_port_protocol)
1599 tx->key = NULL;
1600 - else if (ieee80211_is_robust_mgmt_frame(hdr) &&
1601 + else if (ieee80211_is_robust_mgmt_frame(tx->skb) &&
1602 !(ieee80211_is_action(hdr->frame_control) &&
1603 tx->sta && test_sta_flag(tx->sta, WLAN_STA_MFP)))
1604 tx->key = NULL;
1605 else if (ieee80211_is_mgmt(hdr->frame_control) &&
1606 - !ieee80211_is_robust_mgmt_frame(hdr))
1607 + !ieee80211_is_robust_mgmt_frame(tx->skb))
1608 tx->key = NULL;
1609 else {
1610 I802_DEBUG_INC(tx->local->tx_handlers_drop_unencrypted);
1611 @@ -878,7 +890,7 @@ static int ieee80211_fragment(struct iee
1612 }
1613
1614 /* adjust first fragment's length */
1615 - skb->len = hdrlen + per_fragm;
1616 + skb_trim(skb, hdrlen + per_fragm);
1617 return 0;
1618 }
1619
1620 --- a/net/mac80211/wpa.c
1621 +++ b/net/mac80211/wpa.c
1622 @@ -499,7 +499,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee
1623 hdrlen = ieee80211_hdrlen(hdr->frame_control);
1624
1625 if (!ieee80211_is_data(hdr->frame_control) &&
1626 - !ieee80211_is_robust_mgmt_frame(hdr))
1627 + !ieee80211_is_robust_mgmt_frame(skb))
1628 return RX_CONTINUE;
1629
1630 data_len = skb->len - hdrlen - IEEE80211_CCMP_HDR_LEN -
1631 --- a/net/wireless/ap.c
1632 +++ b/net/wireless/ap.c
1633 @@ -27,9 +27,10 @@ static int __cfg80211_stop_ap(struct cfg
1634 err = rdev_stop_ap(rdev, dev);
1635 if (!err) {
1636 wdev->beacon_interval = 0;
1637 - wdev->channel = NULL;
1638 + memset(&wdev->chandef, 0, sizeof(wdev->chandef));
1639 wdev->ssid_len = 0;
1640 rdev_set_qos_map(rdev, dev, NULL);
1641 + nl80211_send_ap_stopped(wdev);
1642 }
1643
1644 return err;
1645 --- a/net/wireless/core.c
1646 +++ b/net/wireless/core.c
1647 @@ -203,8 +203,11 @@ void cfg80211_stop_p2p_device(struct cfg
1648
1649 rdev->opencount--;
1650
1651 - WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev &&
1652 - !rdev->scan_req->notified);
1653 + if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
1654 + if (WARN_ON(!rdev->scan_req->notified))
1655 + rdev->scan_req->aborted = true;
1656 + ___cfg80211_scan_done(rdev, false);
1657 + }
1658 }
1659
1660 static int cfg80211_rfkill_set_block(void *data, bool blocked)
1661 @@ -447,9 +450,6 @@ int wiphy_register(struct wiphy *wiphy)
1662 int i;
1663 u16 ifmodes = wiphy->interface_modes;
1664
1665 - /* support for 5/10 MHz is broken due to nl80211 API mess - disable */
1666 - wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_5_10_MHZ;
1667 -
1668 /*
1669 * There are major locking problems in nl80211/mac80211 for CSA,
1670 * disable for all drivers until this has been reworked.
1671 @@ -875,8 +875,11 @@ static int cfg80211_netdev_notifier_call
1672 break;
1673 case NETDEV_DOWN:
1674 cfg80211_update_iface_num(rdev, wdev->iftype, -1);
1675 - WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev &&
1676 - !rdev->scan_req->notified);
1677 + if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
1678 + if (WARN_ON(!rdev->scan_req->notified))
1679 + rdev->scan_req->aborted = true;
1680 + ___cfg80211_scan_done(rdev, false);
1681 + }
1682
1683 if (WARN_ON(rdev->sched_scan_req &&
1684 rdev->sched_scan_req->dev == wdev->netdev)) {
1685 --- a/net/wireless/core.h
1686 +++ b/net/wireless/core.h
1687 @@ -62,6 +62,7 @@ struct cfg80211_registered_device {
1688 struct rb_root bss_tree;
1689 u32 bss_generation;
1690 struct cfg80211_scan_request *scan_req; /* protected by RTNL */
1691 + struct sk_buff *scan_msg;
1692 struct cfg80211_sched_scan_request *sched_scan_req;
1693 unsigned long suspend_at;
1694 struct work_struct scan_done_wk;
1695 @@ -210,6 +211,7 @@ struct cfg80211_event {
1696 } dc;
1697 struct {
1698 u8 bssid[ETH_ALEN];
1699 + struct ieee80211_channel *channel;
1700 } ij;
1701 };
1702 };
1703 @@ -257,7 +259,8 @@ int __cfg80211_leave_ibss(struct cfg8021
1704 struct net_device *dev, bool nowext);
1705 int cfg80211_leave_ibss(struct cfg80211_registered_device *rdev,
1706 struct net_device *dev, bool nowext);
1707 -void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid);
1708 +void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
1709 + struct ieee80211_channel *channel);
1710 int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
1711 struct wireless_dev *wdev);
1712
1713 @@ -361,7 +364,8 @@ int cfg80211_validate_key_settings(struc
1714 struct key_params *params, int key_idx,
1715 bool pairwise, const u8 *mac_addr);
1716 void __cfg80211_scan_done(struct work_struct *wk);
1717 -void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev);
1718 +void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev,
1719 + bool send_message);
1720 void __cfg80211_sched_scan_results(struct work_struct *wk);
1721 int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
1722 bool driver_initiated);
1723 @@ -441,7 +445,8 @@ static inline unsigned int elapsed_jiffi
1724 void
1725 cfg80211_get_chan_state(struct wireless_dev *wdev,
1726 struct ieee80211_channel **chan,
1727 - enum cfg80211_chan_mode *chanmode);
1728 + enum cfg80211_chan_mode *chanmode,
1729 + u8 *radar_detect);
1730
1731 int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev,
1732 struct cfg80211_chan_def *chandef);
1733 --- a/net/wireless/nl80211.c
1734 +++ b/net/wireless/nl80211.c
1735 @@ -1723,9 +1723,10 @@ static int nl80211_dump_wiphy(struct sk_
1736 * We can then retry with the larger buffer.
1737 */
1738 if ((ret == -ENOBUFS || ret == -EMSGSIZE) &&
1739 - !skb->len &&
1740 + !skb->len && !state->split &&
1741 cb->min_dump_alloc < 4096) {
1742 cb->min_dump_alloc = 4096;
1743 + state->split_start = 0;
1744 rtnl_unlock();
1745 return 1;
1746 }
1747 @@ -2047,10 +2048,12 @@ static int nl80211_set_wiphy(struct sk_b
1748 nla_for_each_nested(nl_txq_params,
1749 info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
1750 rem_txq_params) {
1751 - nla_parse(tb, NL80211_TXQ_ATTR_MAX,
1752 - nla_data(nl_txq_params),
1753 - nla_len(nl_txq_params),
1754 - txq_params_policy);
1755 + result = nla_parse(tb, NL80211_TXQ_ATTR_MAX,
1756 + nla_data(nl_txq_params),
1757 + nla_len(nl_txq_params),
1758 + txq_params_policy);
1759 + if (result)
1760 + goto bad_res;
1761 result = parse_txq_params(tb, &txq_params);
1762 if (result)
1763 goto bad_res;
1764 @@ -3289,7 +3292,7 @@ static int nl80211_start_ap(struct sk_bu
1765 if (!err) {
1766 wdev->preset_chandef = params.chandef;
1767 wdev->beacon_interval = params.beacon_interval;
1768 - wdev->channel = params.chandef.chan;
1769 + wdev->chandef = params.chandef;
1770 wdev->ssid_len = params.ssid_len;
1771 memcpy(wdev->ssid, params.ssid, wdev->ssid_len);
1772 }
1773 @@ -5210,9 +5213,11 @@ static int nl80211_set_reg(struct sk_buf
1774
1775 nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES],
1776 rem_reg_rules) {
1777 - nla_parse(tb, NL80211_REG_RULE_ATTR_MAX,
1778 - nla_data(nl_reg_rule), nla_len(nl_reg_rule),
1779 - reg_rule_policy);
1780 + r = nla_parse(tb, NL80211_REG_RULE_ATTR_MAX,
1781 + nla_data(nl_reg_rule), nla_len(nl_reg_rule),
1782 + reg_rule_policy);
1783 + if (r)
1784 + goto bad_reg;
1785 r = parse_reg_rule(tb, &rd->reg_rules[rule_idx]);
1786 if (r)
1787 goto bad_reg;
1788 @@ -5277,7 +5282,7 @@ static int nl80211_trigger_scan(struct s
1789 if (!rdev->ops->scan)
1790 return -EOPNOTSUPP;
1791
1792 - if (rdev->scan_req) {
1793 + if (rdev->scan_req || rdev->scan_msg) {
1794 err = -EBUSY;
1795 goto unlock;
1796 }
1797 @@ -5475,6 +5480,7 @@ static int nl80211_start_sched_scan(stru
1798 enum ieee80211_band band;
1799 size_t ie_len;
1800 struct nlattr *tb[NL80211_SCHED_SCAN_MATCH_ATTR_MAX + 1];
1801 + s32 default_match_rssi = NL80211_SCAN_RSSI_THOLD_OFF;
1802
1803 if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_SCHED_SCAN) ||
1804 !rdev->ops->sched_scan_start)
1805 @@ -5509,11 +5515,40 @@ static int nl80211_start_sched_scan(stru
1806 if (n_ssids > wiphy->max_sched_scan_ssids)
1807 return -EINVAL;
1808
1809 - if (info->attrs[NL80211_ATTR_SCHED_SCAN_MATCH])
1810 + /*
1811 + * First, count the number of 'real' matchsets. Due to an issue with
1812 + * the old implementation, matchsets containing only the RSSI attribute
1813 + * (NL80211_SCHED_SCAN_MATCH_ATTR_RSSI) are considered as the 'default'
1814 + * RSSI for all matchsets, rather than their own matchset for reporting
1815 + * all APs with a strong RSSI. This is needed to be compatible with
1816 + * older userspace that treated a matchset with only the RSSI as the
1817 + * global RSSI for all other matchsets - if there are other matchsets.
1818 + */
1819 + if (info->attrs[NL80211_ATTR_SCHED_SCAN_MATCH]) {
1820 nla_for_each_nested(attr,
1821 info->attrs[NL80211_ATTR_SCHED_SCAN_MATCH],
1822 - tmp)
1823 - n_match_sets++;
1824 + tmp) {
1825 + struct nlattr *rssi;
1826 +
1827 + err = nla_parse(tb, NL80211_SCHED_SCAN_MATCH_ATTR_MAX,
1828 + nla_data(attr), nla_len(attr),
1829 + nl80211_match_policy);
1830 + if (err)
1831 + return err;
1832 + /* add other standalone attributes here */
1833 + if (tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID]) {
1834 + n_match_sets++;
1835 + continue;
1836 + }
1837 + rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI];
1838 + if (rssi)
1839 + default_match_rssi = nla_get_s32(rssi);
1840 + }
1841 + }
1842 +
1843 + /* However, if there's no other matchset, add the RSSI one */
1844 + if (!n_match_sets && default_match_rssi != NL80211_SCAN_RSSI_THOLD_OFF)
1845 + n_match_sets = 1;
1846
1847 if (n_match_sets > wiphy->max_match_sets)
1848 return -EINVAL;
1849 @@ -5634,11 +5669,22 @@ static int nl80211_start_sched_scan(stru
1850 tmp) {
1851 struct nlattr *ssid, *rssi;
1852
1853 - nla_parse(tb, NL80211_SCHED_SCAN_MATCH_ATTR_MAX,
1854 - nla_data(attr), nla_len(attr),
1855 - nl80211_match_policy);
1856 + err = nla_parse(tb, NL80211_SCHED_SCAN_MATCH_ATTR_MAX,
1857 + nla_data(attr), nla_len(attr),
1858 + nl80211_match_policy);
1859 + if (err)
1860 + goto out_free;
1861 ssid = tb[NL80211_SCHED_SCAN_MATCH_ATTR_SSID];
1862 if (ssid) {
1863 + if (WARN_ON(i >= n_match_sets)) {
1864 + /* this indicates a programming error,
1865 + * the loop above should have verified
1866 + * things properly
1867 + */
1868 + err = -EINVAL;
1869 + goto out_free;
1870 + }
1871 +
1872 if (nla_len(ssid) > IEEE80211_MAX_SSID_LEN) {
1873 err = -EINVAL;
1874 goto out_free;
1875 @@ -5647,15 +5693,28 @@ static int nl80211_start_sched_scan(stru
1876 nla_data(ssid), nla_len(ssid));
1877 request->match_sets[i].ssid.ssid_len =
1878 nla_len(ssid);
1879 + /* special attribute - old implemenation w/a */
1880 + request->match_sets[i].rssi_thold =
1881 + default_match_rssi;
1882 + rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI];
1883 + if (rssi)
1884 + request->match_sets[i].rssi_thold =
1885 + nla_get_s32(rssi);
1886 }
1887 - rssi = tb[NL80211_SCHED_SCAN_MATCH_ATTR_RSSI];
1888 - if (rssi)
1889 - request->rssi_thold = nla_get_u32(rssi);
1890 - else
1891 - request->rssi_thold =
1892 - NL80211_SCAN_RSSI_THOLD_OFF;
1893 i++;
1894 }
1895 +
1896 + /* there was no other matchset, so the RSSI one is alone */
1897 + if (i == 0)
1898 + request->match_sets[0].rssi_thold = default_match_rssi;
1899 +
1900 + request->min_rssi_thold = INT_MAX;
1901 + for (i = 0; i < n_match_sets; i++)
1902 + request->min_rssi_thold =
1903 + min(request->match_sets[i].rssi_thold,
1904 + request->min_rssi_thold);
1905 + } else {
1906 + request->min_rssi_thold = NL80211_SCAN_RSSI_THOLD_OFF;
1907 }
1908
1909 if (info->attrs[NL80211_ATTR_IE]) {
1910 @@ -5751,7 +5810,7 @@ static int nl80211_start_radar_detection
1911
1912 err = rdev->ops->start_radar_detection(&rdev->wiphy, dev, &chandef);
1913 if (!err) {
1914 - wdev->channel = chandef.chan;
1915 + wdev->chandef = chandef;
1916 wdev->cac_started = true;
1917 wdev->cac_start_time = jiffies;
1918 }
1919 @@ -7502,16 +7561,19 @@ static int nl80211_set_tx_bitrate_mask(s
1920 * directly to the enum ieee80211_band values used in cfg80211.
1921 */
1922 BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
1923 - nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem)
1924 - {
1925 + nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
1926 enum ieee80211_band band = nla_type(tx_rates);
1927 + int err;
1928 +
1929 if (band < 0 || band >= IEEE80211_NUM_BANDS)
1930 return -EINVAL;
1931 sband = rdev->wiphy.bands[band];
1932 if (sband == NULL)
1933 return -EINVAL;
1934 - nla_parse(tb, NL80211_TXRATE_MAX, nla_data(tx_rates),
1935 - nla_len(tx_rates), nl80211_txattr_policy);
1936 + err = nla_parse(tb, NL80211_TXRATE_MAX, nla_data(tx_rates),
1937 + nla_len(tx_rates), nl80211_txattr_policy);
1938 + if (err)
1939 + return err;
1940 if (tb[NL80211_TXRATE_LEGACY]) {
1941 mask.control[band].legacy = rateset_to_mask(
1942 sband,
1943 @@ -10054,40 +10116,31 @@ void nl80211_send_scan_start(struct cfg8
1944 NL80211_MCGRP_SCAN, GFP_KERNEL);
1945 }
1946
1947 -void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
1948 - struct wireless_dev *wdev)
1949 +struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev,
1950 + struct wireless_dev *wdev, bool aborted)
1951 {
1952 struct sk_buff *msg;
1953
1954 msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
1955 if (!msg)
1956 - return;
1957 + return NULL;
1958
1959 if (nl80211_send_scan_msg(msg, rdev, wdev, 0, 0, 0,
1960 - NL80211_CMD_NEW_SCAN_RESULTS) < 0) {
1961 + aborted ? NL80211_CMD_SCAN_ABORTED :
1962 + NL80211_CMD_NEW_SCAN_RESULTS) < 0) {
1963 nlmsg_free(msg);
1964 - return;
1965 + return NULL;
1966 }
1967
1968 - genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
1969 - NL80211_MCGRP_SCAN, GFP_KERNEL);
1970 + return msg;
1971 }
1972
1973 -void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
1974 - struct wireless_dev *wdev)
1975 +void nl80211_send_scan_result(struct cfg80211_registered_device *rdev,
1976 + struct sk_buff *msg)
1977 {
1978 - struct sk_buff *msg;
1979 -
1980 - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
1981 if (!msg)
1982 return;
1983
1984 - if (nl80211_send_scan_msg(msg, rdev, wdev, 0, 0, 0,
1985 - NL80211_CMD_SCAN_ABORTED) < 0) {
1986 - nlmsg_free(msg);
1987 - return;
1988 - }
1989 -
1990 genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
1991 NL80211_MCGRP_SCAN, GFP_KERNEL);
1992 }
1993 @@ -11158,7 +11211,8 @@ void cfg80211_ch_switch_notify(struct ne
1994 wdev->iftype != NL80211_IFTYPE_MESH_POINT))
1995 return;
1996
1997 - wdev->channel = chandef->chan;
1998 + wdev->chandef = *chandef;
1999 + wdev->preset_chandef = *chandef;
2000 nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL);
2001 }
2002 EXPORT_SYMBOL(cfg80211_ch_switch_notify);
2003 @@ -11673,6 +11727,35 @@ void cfg80211_crit_proto_stopped(struct
2004 }
2005 EXPORT_SYMBOL(cfg80211_crit_proto_stopped);
2006
2007 +void nl80211_send_ap_stopped(struct wireless_dev *wdev)
2008 +{
2009 + struct wiphy *wiphy = wdev->wiphy;
2010 + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
2011 + struct sk_buff *msg;
2012 + void *hdr;
2013 +
2014 + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
2015 + if (!msg)
2016 + return;
2017 +
2018 + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_STOP_AP);
2019 + if (!hdr)
2020 + goto out;
2021 +
2022 + if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) ||
2023 + nla_put_u32(msg, NL80211_ATTR_IFINDEX, wdev->netdev->ifindex) ||
2024 + nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)))
2025 + goto out;
2026 +
2027 + genlmsg_end(msg, hdr);
2028 +
2029 + genlmsg_multicast_netns(&nl80211_fam, wiphy_net(wiphy), msg, 0,
2030 + NL80211_MCGRP_MLME, GFP_KERNEL);
2031 + return;
2032 + out:
2033 + nlmsg_free(msg);
2034 +}
2035 +
2036 /* initialisation/exit functions */
2037
2038 int nl80211_init(void)
2039 --- a/net/wireless/nl80211.h
2040 +++ b/net/wireless/nl80211.h
2041 @@ -8,10 +8,10 @@ void nl80211_exit(void);
2042 void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev);
2043 void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
2044 struct wireless_dev *wdev);
2045 -void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
2046 - struct wireless_dev *wdev);
2047 -void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
2048 - struct wireless_dev *wdev);
2049 +struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev,
2050 + struct wireless_dev *wdev, bool aborted);
2051 +void nl80211_send_scan_result(struct cfg80211_registered_device *rdev,
2052 + struct sk_buff *msg);
2053 void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
2054 struct net_device *netdev, u32 cmd);
2055 void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev,
2056 @@ -74,6 +74,8 @@ nl80211_radar_notify(struct cfg80211_reg
2057 enum nl80211_radar_event event,
2058 struct net_device *netdev, gfp_t gfp);
2059
2060 +void nl80211_send_ap_stopped(struct wireless_dev *wdev);
2061 +
2062 void cfg80211_rdev_free_coalesce(struct cfg80211_registered_device *rdev);
2063
2064 #endif /* __NET_WIRELESS_NL80211_H */
2065 --- a/net/wireless/scan.c
2066 +++ b/net/wireless/scan.c
2067 @@ -161,18 +161,25 @@ static void __cfg80211_bss_expire(struct
2068 dev->bss_generation++;
2069 }
2070
2071 -void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev)
2072 +void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev,
2073 + bool send_message)
2074 {
2075 struct cfg80211_scan_request *request;
2076 struct wireless_dev *wdev;
2077 + struct sk_buff *msg;
2078 #ifdef CPTCFG_CFG80211_WEXT
2079 union iwreq_data wrqu;
2080 #endif
2081
2082 ASSERT_RTNL();
2083
2084 - request = rdev->scan_req;
2085 + if (rdev->scan_msg) {
2086 + nl80211_send_scan_result(rdev, rdev->scan_msg);
2087 + rdev->scan_msg = NULL;
2088 + return;
2089 + }
2090
2091 + request = rdev->scan_req;
2092 if (!request)
2093 return;
2094
2095 @@ -186,18 +193,16 @@ void ___cfg80211_scan_done(struct cfg802
2096 if (wdev->netdev)
2097 cfg80211_sme_scan_done(wdev->netdev);
2098
2099 - if (request->aborted) {
2100 - nl80211_send_scan_aborted(rdev, wdev);
2101 - } else {
2102 - if (request->flags & NL80211_SCAN_FLAG_FLUSH) {
2103 - /* flush entries from previous scans */
2104 - spin_lock_bh(&rdev->bss_lock);
2105 - __cfg80211_bss_expire(rdev, request->scan_start);
2106 - spin_unlock_bh(&rdev->bss_lock);
2107 - }
2108 - nl80211_send_scan_done(rdev, wdev);
2109 + if (!request->aborted &&
2110 + request->flags & NL80211_SCAN_FLAG_FLUSH) {
2111 + /* flush entries from previous scans */
2112 + spin_lock_bh(&rdev->bss_lock);
2113 + __cfg80211_bss_expire(rdev, request->scan_start);
2114 + spin_unlock_bh(&rdev->bss_lock);
2115 }
2116
2117 + msg = nl80211_build_scan_msg(rdev, wdev, request->aborted);
2118 +
2119 #ifdef CPTCFG_CFG80211_WEXT
2120 if (wdev->netdev && !request->aborted) {
2121 memset(&wrqu, 0, sizeof(wrqu));
2122 @@ -211,6 +216,11 @@ void ___cfg80211_scan_done(struct cfg802
2123
2124 rdev->scan_req = NULL;
2125 kfree(request);
2126 +
2127 + if (!send_message)
2128 + rdev->scan_msg = msg;
2129 + else
2130 + nl80211_send_scan_result(rdev, msg);
2131 }
2132
2133 void __cfg80211_scan_done(struct work_struct *wk)
2134 @@ -221,7 +231,7 @@ void __cfg80211_scan_done(struct work_st
2135 scan_done_wk);
2136
2137 rtnl_lock();
2138 - ___cfg80211_scan_done(rdev);
2139 + ___cfg80211_scan_done(rdev, true);
2140 rtnl_unlock();
2141 }
2142
2143 @@ -1079,7 +1089,7 @@ int cfg80211_wext_siwscan(struct net_dev
2144 if (IS_ERR(rdev))
2145 return PTR_ERR(rdev);
2146
2147 - if (rdev->scan_req) {
2148 + if (rdev->scan_req || rdev->scan_msg) {
2149 err = -EBUSY;
2150 goto out;
2151 }
2152 @@ -1481,7 +1491,7 @@ int cfg80211_wext_giwscan(struct net_dev
2153 if (IS_ERR(rdev))
2154 return PTR_ERR(rdev);
2155
2156 - if (rdev->scan_req)
2157 + if (rdev->scan_req || rdev->scan_msg)
2158 return -EAGAIN;
2159
2160 res = ieee80211_scan_results(rdev, info, extra, data->length);
2161 --- a/net/wireless/sme.c
2162 +++ b/net/wireless/sme.c
2163 @@ -67,7 +67,7 @@ static int cfg80211_conn_scan(struct wir
2164 ASSERT_RDEV_LOCK(rdev);
2165 ASSERT_WDEV_LOCK(wdev);
2166
2167 - if (rdev->scan_req)
2168 + if (rdev->scan_req || rdev->scan_msg)
2169 return -EBUSY;
2170
2171 if (wdev->conn->params.channel)
2172 --- a/net/mac80211/mlme.c
2173 +++ b/net/mac80211/mlme.c
2174 @@ -1001,7 +1001,6 @@ ieee80211_sta_process_chanswitch(struct
2175 }
2176
2177 ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED;
2178 - sdata->vif.csa_active = true;
2179
2180 mutex_lock(&local->chanctx_mtx);
2181 if (local->use_chanctx) {
2182 @@ -1039,6 +1038,7 @@ ieee80211_sta_process_chanswitch(struct
2183 mutex_unlock(&local->chanctx_mtx);
2184
2185 sdata->csa_chandef = csa_ie.chandef;
2186 + sdata->vif.csa_active = true;
2187
2188 if (csa_ie.mode)
2189 ieee80211_stop_queues_by_reason(&local->hw,
2190 --- a/net/mac80211/chan.c
2191 +++ b/net/mac80211/chan.c
2192 @@ -196,6 +196,8 @@ static bool ieee80211_is_radar_required(
2193 {
2194 struct ieee80211_sub_if_data *sdata;
2195
2196 + lockdep_assert_held(&local->mtx);
2197 +
2198 rcu_read_lock();
2199 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
2200 if (sdata->radar_required) {
2201 --- a/net/mac80211/ibss.c
2202 +++ b/net/mac80211/ibss.c
2203 @@ -294,7 +294,6 @@ static void __ieee80211_sta_join_ibss(st
2204 }
2205
2206 mutex_lock(&local->mtx);
2207 - ieee80211_vif_release_channel(sdata);
2208 if (ieee80211_vif_use_channel(sdata, &chandef,
2209 ifibss->fixed_channel ?
2210 IEEE80211_CHANCTX_SHARED :
2211 @@ -303,6 +302,7 @@ static void __ieee80211_sta_join_ibss(st
2212 mutex_unlock(&local->mtx);
2213 return;
2214 }
2215 + sdata->radar_required = radar_required;
2216 mutex_unlock(&local->mtx);
2217
2218 memcpy(ifibss->bssid, bssid, ETH_ALEN);
2219 @@ -318,7 +318,6 @@ static void __ieee80211_sta_join_ibss(st
2220 rcu_assign_pointer(ifibss->presp, presp);
2221 mgmt = (void *)presp->head;
2222
2223 - sdata->radar_required = radar_required;
2224 sdata->vif.bss_conf.enable_beacon = true;
2225 sdata->vif.bss_conf.beacon_int = beacon_int;
2226 sdata->vif.bss_conf.basic_rates = basic_rates;
2227 @@ -386,7 +385,7 @@ static void __ieee80211_sta_join_ibss(st
2228 presp->head_len, 0, GFP_KERNEL);
2229 cfg80211_put_bss(local->hw.wiphy, bss);
2230 netif_carrier_on(sdata->dev);
2231 - cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL);
2232 + cfg80211_ibss_joined(sdata->dev, ifibss->bssid, chan, GFP_KERNEL);
2233 }
2234
2235 static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata,
2236 @@ -802,6 +801,8 @@ ieee80211_ibss_process_chanswitch(struct
2237 int err;
2238 u32 sta_flags;
2239
2240 + sdata_assert_lock(sdata);
2241 +
2242 sta_flags = IEEE80211_STA_DISABLE_VHT;
2243 switch (ifibss->chandef.width) {
2244 case NL80211_CHAN_WIDTH_5:
2245 @@ -1471,6 +1472,11 @@ static void ieee80211_rx_mgmt_probe_req(
2246 memcpy(((struct ieee80211_mgmt *) skb->data)->da, mgmt->sa, ETH_ALEN);
2247 ibss_dbg(sdata, "Sending ProbeResp to %pM\n", mgmt->sa);
2248 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
2249 +
2250 + /* avoid excessive retries for probe request to wildcard SSIDs */
2251 + if (pos[1] == 0)
2252 + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_NO_ACK;
2253 +
2254 ieee80211_tx_skb(sdata, skb);
2255 }
2256
2257 --- a/net/mac80211/mesh.c
2258 +++ b/net/mac80211/mesh.c
2259 @@ -872,6 +872,8 @@ ieee80211_mesh_process_chnswitch(struct
2260 if (!ifmsh->mesh_id)
2261 return false;
2262
2263 + sdata_assert_lock(sdata);
2264 +
2265 sta_flags = IEEE80211_STA_DISABLE_VHT;
2266 switch (sdata->vif.bss_conf.chandef.width) {
2267 case NL80211_CHAN_WIDTH_20_NOHT:
2268 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
2269 +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
2270 @@ -4658,6 +4658,7 @@ brcmf_notify_connect_status(struct brcmf
2271 struct brcmf_cfg80211_info *cfg = ifp->drvr->config;
2272 struct net_device *ndev = ifp->ndev;
2273 struct brcmf_cfg80211_profile *profile = &ifp->vif->profile;
2274 + struct ieee80211_channel *chan;
2275 s32 err = 0;
2276
2277 if (ifp->vif->mode == WL_MODE_AP) {
2278 @@ -4665,9 +4666,10 @@ brcmf_notify_connect_status(struct brcmf
2279 } else if (brcmf_is_linkup(e)) {
2280 brcmf_dbg(CONN, "Linkup\n");
2281 if (brcmf_is_ibssmode(ifp->vif)) {
2282 + chan = ieee80211_get_channel(cfg->wiphy, cfg->channel);
2283 memcpy(profile->bssid, e->addr, ETH_ALEN);
2284 wl_inform_ibss(cfg, ndev, e->addr);
2285 - cfg80211_ibss_joined(ndev, e->addr, GFP_KERNEL);
2286 + cfg80211_ibss_joined(ndev, e->addr, chan, GFP_KERNEL);
2287 clear_bit(BRCMF_VIF_STATUS_CONNECTING,
2288 &ifp->vif->sme_state);
2289 set_bit(BRCMF_VIF_STATUS_CONNECTED,
2290 --- a/drivers/net/wireless/libertas/cfg.c
2291 +++ b/drivers/net/wireless/libertas/cfg.c
2292 @@ -1766,7 +1766,8 @@ static void lbs_join_post(struct lbs_pri
2293 memcpy(priv->wdev->ssid, params->ssid, params->ssid_len);
2294 priv->wdev->ssid_len = params->ssid_len;
2295
2296 - cfg80211_ibss_joined(priv->dev, bssid, GFP_KERNEL);
2297 + cfg80211_ibss_joined(priv->dev, bssid, params->chandef.chan,
2298 + GFP_KERNEL);
2299
2300 /* TODO: consider doing this at MACREG_INT_CODE_LINK_SENSED time */
2301 priv->connect_status = LBS_CONNECTED;
2302 --- a/drivers/net/wireless/mwifiex/cfg80211.c
2303 +++ b/drivers/net/wireless/mwifiex/cfg80211.c
2304 @@ -1881,7 +1881,8 @@ mwifiex_cfg80211_join_ibss(struct wiphy
2305 params->privacy);
2306 done:
2307 if (!ret) {
2308 - cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid, GFP_KERNEL);
2309 + cfg80211_ibss_joined(priv->netdev, priv->cfg_bssid,
2310 + params->chandef.chan, GFP_KERNEL);
2311 dev_dbg(priv->adapter->dev,
2312 "info: joined/created adhoc network with bssid"
2313 " %pM successfully\n", priv->cfg_bssid);
2314 --- a/drivers/net/wireless/rndis_wlan.c
2315 +++ b/drivers/net/wireless/rndis_wlan.c
2316 @@ -2835,7 +2835,9 @@ static void rndis_wlan_do_link_up_work(s
2317 bssid, req_ie, req_ie_len,
2318 resp_ie, resp_ie_len, GFP_KERNEL);
2319 } else if (priv->infra_mode == NDIS_80211_INFRA_ADHOC)
2320 - cfg80211_ibss_joined(usbdev->net, bssid, GFP_KERNEL);
2321 + cfg80211_ibss_joined(usbdev->net, bssid,
2322 + get_current_channel(usbdev, NULL),
2323 + GFP_KERNEL);
2324
2325 kfree(info);
2326
2327 --- a/net/wireless/ibss.c
2328 +++ b/net/wireless/ibss.c
2329 @@ -14,7 +14,8 @@
2330 #include "rdev-ops.h"
2331
2332
2333 -void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid)
2334 +void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
2335 + struct ieee80211_channel *channel)
2336 {
2337 struct wireless_dev *wdev = dev->ieee80211_ptr;
2338 struct cfg80211_bss *bss;
2339 @@ -28,8 +29,7 @@ void __cfg80211_ibss_joined(struct net_d
2340 if (!wdev->ssid_len)
2341 return;
2342
2343 - bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid,
2344 - wdev->ssid, wdev->ssid_len,
2345 + bss = cfg80211_get_bss(wdev->wiphy, channel, bssid, NULL, 0,
2346 WLAN_CAPABILITY_IBSS, WLAN_CAPABILITY_IBSS);
2347
2348 if (WARN_ON(!bss))
2349 @@ -54,21 +54,26 @@ void __cfg80211_ibss_joined(struct net_d
2350 #endif
2351 }
2352
2353 -void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid, gfp_t gfp)
2354 +void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
2355 + struct ieee80211_channel *channel, gfp_t gfp)
2356 {
2357 struct wireless_dev *wdev = dev->ieee80211_ptr;
2358 struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
2359 struct cfg80211_event *ev;
2360 unsigned long flags;
2361
2362 - trace_cfg80211_ibss_joined(dev, bssid);
2363 + trace_cfg80211_ibss_joined(dev, bssid, channel);
2364 +
2365 + if (WARN_ON(!channel))
2366 + return;
2367
2368 ev = kzalloc(sizeof(*ev), gfp);
2369 if (!ev)
2370 return;
2371
2372 ev->type = EVENT_IBSS_JOINED;
2373 - memcpy(ev->cr.bssid, bssid, ETH_ALEN);
2374 + memcpy(ev->ij.bssid, bssid, ETH_ALEN);
2375 + ev->ij.channel = channel;
2376
2377 spin_lock_irqsave(&wdev->event_lock, flags);
2378 list_add_tail(&ev->list, &wdev->event_list);
2379 @@ -117,6 +122,7 @@ int __cfg80211_join_ibss(struct cfg80211
2380
2381 wdev->ibss_fixed = params->channel_fixed;
2382 wdev->ibss_dfs_possible = params->userspace_handles_dfs;
2383 + wdev->chandef = params->chandef;
2384 #ifdef CPTCFG_CFG80211_WEXT
2385 wdev->wext.ibss.chandef = params->chandef;
2386 #endif
2387 @@ -200,6 +206,7 @@ static void __cfg80211_clear_ibss(struct
2388
2389 wdev->current_bss = NULL;
2390 wdev->ssid_len = 0;
2391 + memset(&wdev->chandef, 0, sizeof(wdev->chandef));
2392 #ifdef CPTCFG_CFG80211_WEXT
2393 if (!nowext)
2394 wdev->wext.ibss.ssid_len = 0;
2395 --- a/net/wireless/trace.h
2396 +++ b/net/wireless/trace.h
2397 @@ -2278,11 +2278,6 @@ DECLARE_EVENT_CLASS(cfg80211_rx_evt,
2398 TP_printk(NETDEV_PR_FMT ", " MAC_PR_FMT, NETDEV_PR_ARG, MAC_PR_ARG(addr))
2399 );
2400
2401 -DEFINE_EVENT(cfg80211_rx_evt, cfg80211_ibss_joined,
2402 - TP_PROTO(struct net_device *netdev, const u8 *addr),
2403 - TP_ARGS(netdev, addr)
2404 -);
2405 -
2406 DEFINE_EVENT(cfg80211_rx_evt, cfg80211_rx_spurious_frame,
2407 TP_PROTO(struct net_device *netdev, const u8 *addr),
2408 TP_ARGS(netdev, addr)
2409 @@ -2293,6 +2288,24 @@ DEFINE_EVENT(cfg80211_rx_evt, cfg80211_r
2410 TP_ARGS(netdev, addr)
2411 );
2412
2413 +TRACE_EVENT(cfg80211_ibss_joined,
2414 + TP_PROTO(struct net_device *netdev, const u8 *bssid,
2415 + struct ieee80211_channel *channel),
2416 + TP_ARGS(netdev, bssid, channel),
2417 + TP_STRUCT__entry(
2418 + NETDEV_ENTRY
2419 + MAC_ENTRY(bssid)
2420 + CHAN_ENTRY
2421 + ),
2422 + TP_fast_assign(
2423 + NETDEV_ASSIGN;
2424 + MAC_ASSIGN(bssid, bssid);
2425 + CHAN_ASSIGN(channel);
2426 + ),
2427 + TP_printk(NETDEV_PR_FMT ", bssid: " MAC_PR_FMT ", " CHAN_PR_FMT,
2428 + NETDEV_PR_ARG, MAC_PR_ARG(bssid), CHAN_PR_ARG)
2429 +);
2430 +
2431 TRACE_EVENT(cfg80211_probe_status,
2432 TP_PROTO(struct net_device *netdev, const u8 *addr, u64 cookie,
2433 bool acked),
2434 --- a/net/wireless/util.c
2435 +++ b/net/wireless/util.c
2436 @@ -820,7 +820,8 @@ void cfg80211_process_wdev_events(struct
2437 ev->dc.reason, true);
2438 break;
2439 case EVENT_IBSS_JOINED:
2440 - __cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid);
2441 + __cfg80211_ibss_joined(wdev->netdev, ev->ij.bssid,
2442 + ev->ij.channel);
2443 break;
2444 }
2445 wdev_unlock(wdev);
2446 @@ -1356,7 +1357,7 @@ int cfg80211_can_use_iftype_chan(struct
2447 */
2448 mutex_lock_nested(&wdev_iter->mtx, 1);
2449 __acquire(wdev_iter->mtx);
2450 - cfg80211_get_chan_state(wdev_iter, &ch, &chmode);
2451 + cfg80211_get_chan_state(wdev_iter, &ch, &chmode, &radar_detect);
2452 wdev_unlock(wdev_iter);
2453
2454 switch (chmode) {
2455 --- a/net/wireless/chan.c
2456 +++ b/net/wireless/chan.c
2457 @@ -642,7 +642,8 @@ int cfg80211_set_monitor_channel(struct
2458 void
2459 cfg80211_get_chan_state(struct wireless_dev *wdev,
2460 struct ieee80211_channel **chan,
2461 - enum cfg80211_chan_mode *chanmode)
2462 + enum cfg80211_chan_mode *chanmode,
2463 + u8 *radar_detect)
2464 {
2465 *chan = NULL;
2466 *chanmode = CHAN_MODE_UNDEFINED;
2467 @@ -660,6 +661,11 @@ cfg80211_get_chan_state(struct wireless_
2468 !wdev->ibss_dfs_possible)
2469 ? CHAN_MODE_SHARED
2470 : CHAN_MODE_EXCLUSIVE;
2471 +
2472 + /* consider worst-case - IBSS can try to return to the
2473 + * original user-specified channel as creator */
2474 + if (wdev->ibss_dfs_possible)
2475 + *radar_detect |= BIT(wdev->chandef.width);
2476 return;
2477 }
2478 break;
2479 @@ -674,17 +680,26 @@ cfg80211_get_chan_state(struct wireless_
2480 case NL80211_IFTYPE_AP:
2481 case NL80211_IFTYPE_P2P_GO:
2482 if (wdev->cac_started) {
2483 - *chan = wdev->channel;
2484 + *chan = wdev->chandef.chan;
2485 *chanmode = CHAN_MODE_SHARED;
2486 + *radar_detect |= BIT(wdev->chandef.width);
2487 } else if (wdev->beacon_interval) {
2488 - *chan = wdev->channel;
2489 + *chan = wdev->chandef.chan;
2490 *chanmode = CHAN_MODE_SHARED;
2491 +
2492 + if (cfg80211_chandef_dfs_required(wdev->wiphy,
2493 + &wdev->chandef))
2494 + *radar_detect |= BIT(wdev->chandef.width);
2495 }
2496 return;
2497 case NL80211_IFTYPE_MESH_POINT:
2498 if (wdev->mesh_id_len) {
2499 - *chan = wdev->channel;
2500 + *chan = wdev->chandef.chan;
2501 *chanmode = CHAN_MODE_SHARED;
2502 +
2503 + if (cfg80211_chandef_dfs_required(wdev->wiphy,
2504 + &wdev->chandef))
2505 + *radar_detect |= BIT(wdev->chandef.width);
2506 }
2507 return;
2508 case NL80211_IFTYPE_MONITOR:
2509 --- a/net/wireless/mesh.c
2510 +++ b/net/wireless/mesh.c
2511 @@ -195,7 +195,7 @@ int __cfg80211_join_mesh(struct cfg80211
2512 if (!err) {
2513 memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
2514 wdev->mesh_id_len = setup->mesh_id_len;
2515 - wdev->channel = setup->chandef.chan;
2516 + wdev->chandef = setup->chandef;
2517 }
2518
2519 return err;
2520 @@ -244,7 +244,7 @@ int cfg80211_set_mesh_channel(struct cfg
2521 err = rdev_libertas_set_mesh_channel(rdev, wdev->netdev,
2522 chandef->chan);
2523 if (!err)
2524 - wdev->channel = chandef->chan;
2525 + wdev->chandef = *chandef;
2526
2527 return err;
2528 }
2529 @@ -276,7 +276,7 @@ static int __cfg80211_leave_mesh(struct
2530 err = rdev_leave_mesh(rdev, dev);
2531 if (!err) {
2532 wdev->mesh_id_len = 0;
2533 - wdev->channel = NULL;
2534 + memset(&wdev->chandef, 0, sizeof(wdev->chandef));
2535 rdev_set_qos_map(rdev, dev, NULL);
2536 }
2537
2538 --- a/net/wireless/mlme.c
2539 +++ b/net/wireless/mlme.c
2540 @@ -772,7 +772,7 @@ void cfg80211_cac_event(struct net_devic
2541 if (WARN_ON(!wdev->cac_started))
2542 return;
2543
2544 - if (WARN_ON(!wdev->channel))
2545 + if (WARN_ON(!wdev->chandef.chan))
2546 return;
2547
2548 switch (event) {
2549 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
2550 +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
2551 @@ -5065,6 +5065,10 @@ static u16 ar9003_hw_get_max_edge_power(
2552 break;
2553 }
2554 }
2555 +
2556 + if (is2GHz && !twiceMaxEdgePower)
2557 + twiceMaxEdgePower = 60;
2558 +
2559 return twiceMaxEdgePower;
2560 }
2561
2562 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
2563 +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
2564 @@ -23,10 +23,11 @@
2565 #define MAX_MEASUREMENT MAX_IQCAL_MEASUREMENT
2566 #define MAX_MAG_DELTA 11
2567 #define MAX_PHS_DELTA 10
2568 +#define MAXIQCAL 3
2569
2570 struct coeff {
2571 - int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT];
2572 - int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT];
2573 + int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MAXIQCAL];
2574 + int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MAXIQCAL];
2575 int iqc_coeff[2];
2576 };
2577
2578 @@ -800,7 +801,7 @@ static bool ar9003_hw_calc_iq_corr(struc
2579 if (q_q_coff > 63)
2580 q_q_coff = 63;
2581
2582 - iqc_coeff[0] = (q_q_coff * 128) + q_i_coff;
2583 + iqc_coeff[0] = (q_q_coff * 128) + (0x7f & q_i_coff);
2584
2585 ath_dbg(common, CALIBRATE, "tx chain %d: iq corr coeff=%x\n",
2586 chain_idx, iqc_coeff[0]);
2587 @@ -831,7 +832,7 @@ static bool ar9003_hw_calc_iq_corr(struc
2588 if (q_q_coff > 63)
2589 q_q_coff = 63;
2590
2591 - iqc_coeff[1] = (q_q_coff * 128) + q_i_coff;
2592 + iqc_coeff[1] = (q_q_coff * 128) + (0x7f & q_i_coff);
2593
2594 ath_dbg(common, CALIBRATE, "rx chain %d: iq corr coeff=%x\n",
2595 chain_idx, iqc_coeff[1]);
2596 @@ -839,7 +840,8 @@ static bool ar9003_hw_calc_iq_corr(struc
2597 return true;
2598 }
2599
2600 -static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement,
2601 +static void ar9003_hw_detect_outlier(int mp_coeff[][MAXIQCAL],
2602 + int nmeasurement,
2603 int max_delta)
2604 {
2605 int mp_max = -64, max_idx = 0;
2606 @@ -848,20 +850,20 @@ static void ar9003_hw_detect_outlier(int
2607
2608 /* find min/max mismatch across all calibrated gains */
2609 for (i = 0; i < nmeasurement; i++) {
2610 - if (mp_coeff[i] > mp_max) {
2611 - mp_max = mp_coeff[i];
2612 + if (mp_coeff[i][0] > mp_max) {
2613 + mp_max = mp_coeff[i][0];
2614 max_idx = i;
2615 - } else if (mp_coeff[i] < mp_min) {
2616 - mp_min = mp_coeff[i];
2617 + } else if (mp_coeff[i][0] < mp_min) {
2618 + mp_min = mp_coeff[i][0];
2619 min_idx = i;
2620 }
2621 }
2622
2623 /* find average (exclude max abs value) */
2624 for (i = 0; i < nmeasurement; i++) {
2625 - if ((abs(mp_coeff[i]) < abs(mp_max)) ||
2626 - (abs(mp_coeff[i]) < abs(mp_min))) {
2627 - mp_avg += mp_coeff[i];
2628 + if ((abs(mp_coeff[i][0]) < abs(mp_max)) ||
2629 + (abs(mp_coeff[i][0]) < abs(mp_min))) {
2630 + mp_avg += mp_coeff[i][0];
2631 mp_count++;
2632 }
2633 }
2634 @@ -873,7 +875,7 @@ static void ar9003_hw_detect_outlier(int
2635 if (mp_count)
2636 mp_avg /= mp_count;
2637 else
2638 - mp_avg = mp_coeff[nmeasurement - 1];
2639 + mp_avg = mp_coeff[nmeasurement - 1][0];
2640
2641 /* detect outlier */
2642 if (abs(mp_max - mp_min) > max_delta) {
2643 @@ -882,15 +884,16 @@ static void ar9003_hw_detect_outlier(int
2644 else
2645 outlier_idx = min_idx;
2646
2647 - mp_coeff[outlier_idx] = mp_avg;
2648 + mp_coeff[outlier_idx][0] = mp_avg;
2649 }
2650 }
2651
2652 -static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah,
2653 - struct coeff *coeff,
2654 - bool is_reusable)
2655 +static void ar9003_hw_tx_iq_cal_outlier_detection(struct ath_hw *ah,
2656 + struct coeff *coeff,
2657 + bool is_reusable)
2658 {
2659 int i, im, nmeasurement;
2660 + int magnitude, phase;
2661 u32 tx_corr_coeff[MAX_MEASUREMENT][AR9300_MAX_CHAINS];
2662 struct ath9k_hw_cal_data *caldata = ah->caldata;
2663
2664 @@ -920,21 +923,30 @@ static void ar9003_hw_tx_iqcal_load_avg_
2665 if (nmeasurement > MAX_MEASUREMENT)
2666 nmeasurement = MAX_MEASUREMENT;
2667
2668 - /* detect outlier only if nmeasurement > 1 */
2669 - if (nmeasurement > 1) {
2670 - /* Detect magnitude outlier */
2671 - ar9003_hw_detect_outlier(coeff->mag_coeff[i],
2672 - nmeasurement, MAX_MAG_DELTA);
2673 -
2674 - /* Detect phase outlier */
2675 - ar9003_hw_detect_outlier(coeff->phs_coeff[i],
2676 - nmeasurement, MAX_PHS_DELTA);
2677 + /*
2678 + * Skip normal outlier detection for AR9550.
2679 + */
2680 + if (!AR_SREV_9550(ah)) {
2681 + /* detect outlier only if nmeasurement > 1 */
2682 + if (nmeasurement > 1) {
2683 + /* Detect magnitude outlier */
2684 + ar9003_hw_detect_outlier(coeff->mag_coeff[i],
2685 + nmeasurement,
2686 + MAX_MAG_DELTA);
2687 +
2688 + /* Detect phase outlier */
2689 + ar9003_hw_detect_outlier(coeff->phs_coeff[i],
2690 + nmeasurement,
2691 + MAX_PHS_DELTA);
2692 + }
2693 }
2694
2695 for (im = 0; im < nmeasurement; im++) {
2696 + magnitude = coeff->mag_coeff[i][im][0];
2697 + phase = coeff->phs_coeff[i][im][0];
2698
2699 - coeff->iqc_coeff[0] = (coeff->mag_coeff[i][im] & 0x7f) |
2700 - ((coeff->phs_coeff[i][im] & 0x7f) << 7);
2701 + coeff->iqc_coeff[0] =
2702 + (phase & 0x7f) | ((magnitude & 0x7f) << 7);
2703
2704 if ((im % 2) == 0)
2705 REG_RMW_FIELD(ah, tx_corr_coeff[im][i],
2706 @@ -991,7 +1003,63 @@ static bool ar9003_hw_tx_iq_cal_run(stru
2707 return true;
2708 }
2709
2710 -static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah, bool is_reusable)
2711 +static void __ar955x_tx_iq_cal_sort(struct ath_hw *ah,
2712 + struct coeff *coeff,
2713 + int i, int nmeasurement)
2714 +{
2715 + struct ath_common *common = ath9k_hw_common(ah);
2716 + int im, ix, iy, temp;
2717 +
2718 + for (im = 0; im < nmeasurement; im++) {
2719 + for (ix = 0; ix < MAXIQCAL - 1; ix++) {
2720 + for (iy = ix + 1; iy <= MAXIQCAL - 1; iy++) {
2721 + if (coeff->mag_coeff[i][im][iy] <
2722 + coeff->mag_coeff[i][im][ix]) {
2723 + temp = coeff->mag_coeff[i][im][ix];
2724 + coeff->mag_coeff[i][im][ix] =
2725 + coeff->mag_coeff[i][im][iy];
2726 + coeff->mag_coeff[i][im][iy] = temp;
2727 + }
2728 + if (coeff->phs_coeff[i][im][iy] <
2729 + coeff->phs_coeff[i][im][ix]) {
2730 + temp = coeff->phs_coeff[i][im][ix];
2731 + coeff->phs_coeff[i][im][ix] =
2732 + coeff->phs_coeff[i][im][iy];
2733 + coeff->phs_coeff[i][im][iy] = temp;
2734 + }
2735 + }
2736 + }
2737 + coeff->mag_coeff[i][im][0] = coeff->mag_coeff[i][im][MAXIQCAL / 2];
2738 + coeff->phs_coeff[i][im][0] = coeff->phs_coeff[i][im][MAXIQCAL / 2];
2739 +
2740 + ath_dbg(common, CALIBRATE,
2741 + "IQCAL: Median [ch%d][gain%d]: mag = %d phase = %d\n",
2742 + i, im,
2743 + coeff->mag_coeff[i][im][0],
2744 + coeff->phs_coeff[i][im][0]);
2745 + }
2746 +}
2747 +
2748 +static bool ar955x_tx_iq_cal_median(struct ath_hw *ah,
2749 + struct coeff *coeff,
2750 + int iqcal_idx,
2751 + int nmeasurement)
2752 +{
2753 + int i;
2754 +
2755 + if ((iqcal_idx + 1) != MAXIQCAL)
2756 + return false;
2757 +
2758 + for (i = 0; i < AR9300_MAX_CHAINS; i++) {
2759 + __ar955x_tx_iq_cal_sort(ah, coeff, i, nmeasurement);
2760 + }
2761 +
2762 + return true;
2763 +}
2764 +
2765 +static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah,
2766 + int iqcal_idx,
2767 + bool is_reusable)
2768 {
2769 struct ath_common *common = ath9k_hw_common(ah);
2770 const u32 txiqcal_status[AR9300_MAX_CHAINS] = {
2771 @@ -1004,10 +1072,11 @@ static void ar9003_hw_tx_iq_cal_post_pro
2772 AR_PHY_CHAN_INFO_TAB_1,
2773 AR_PHY_CHAN_INFO_TAB_2,
2774 };
2775 - struct coeff coeff;
2776 + static struct coeff coeff;
2777 s32 iq_res[6];
2778 int i, im, j;
2779 - int nmeasurement;
2780 + int nmeasurement = 0;
2781 + bool outlier_detect = true;
2782
2783 for (i = 0; i < AR9300_MAX_CHAINS; i++) {
2784 if (!(ah->txchainmask & (1 << i)))
2785 @@ -1065,17 +1134,23 @@ static void ar9003_hw_tx_iq_cal_post_pro
2786 goto tx_iqcal_fail;
2787 }
2788
2789 - coeff.mag_coeff[i][im] = coeff.iqc_coeff[0] & 0x7f;
2790 - coeff.phs_coeff[i][im] =
2791 + coeff.phs_coeff[i][im][iqcal_idx] =
2792 + coeff.iqc_coeff[0] & 0x7f;
2793 + coeff.mag_coeff[i][im][iqcal_idx] =
2794 (coeff.iqc_coeff[0] >> 7) & 0x7f;
2795
2796 - if (coeff.mag_coeff[i][im] > 63)
2797 - coeff.mag_coeff[i][im] -= 128;
2798 - if (coeff.phs_coeff[i][im] > 63)
2799 - coeff.phs_coeff[i][im] -= 128;
2800 + if (coeff.mag_coeff[i][im][iqcal_idx] > 63)
2801 + coeff.mag_coeff[i][im][iqcal_idx] -= 128;
2802 + if (coeff.phs_coeff[i][im][iqcal_idx] > 63)
2803 + coeff.phs_coeff[i][im][iqcal_idx] -= 128;
2804 }
2805 }
2806 - ar9003_hw_tx_iqcal_load_avg_2_passes(ah, &coeff, is_reusable);
2807 +
2808 + if (AR_SREV_9550(ah))
2809 + outlier_detect = ar955x_tx_iq_cal_median(ah, &coeff,
2810 + iqcal_idx, nmeasurement);
2811 + if (outlier_detect)
2812 + ar9003_hw_tx_iq_cal_outlier_detection(ah, &coeff, is_reusable);
2813
2814 return;
2815
2816 @@ -1409,7 +1484,7 @@ skip_tx_iqcal:
2817 }
2818
2819 if (txiqcal_done)
2820 - ar9003_hw_tx_iq_cal_post_proc(ah, is_reusable);
2821 + ar9003_hw_tx_iq_cal_post_proc(ah, 0, is_reusable);
2822 else if (caldata && test_bit(TXIQCAL_DONE, &caldata->cal_flags))
2823 ar9003_hw_tx_iq_cal_reload(ah);
2824
2825 @@ -1455,14 +1530,38 @@ skip_tx_iqcal:
2826 return true;
2827 }
2828
2829 +static bool do_ar9003_agc_cal(struct ath_hw *ah)
2830 +{
2831 + struct ath_common *common = ath9k_hw_common(ah);
2832 + bool status;
2833 +
2834 + REG_WRITE(ah, AR_PHY_AGC_CONTROL,
2835 + REG_READ(ah, AR_PHY_AGC_CONTROL) |
2836 + AR_PHY_AGC_CONTROL_CAL);
2837 +
2838 + status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
2839 + AR_PHY_AGC_CONTROL_CAL,
2840 + 0, AH_WAIT_TIMEOUT);
2841 + if (!status) {
2842 + ath_dbg(common, CALIBRATE,
2843 + "offset calibration failed to complete in %d ms,"
2844 + "noisy environment?\n",
2845 + AH_WAIT_TIMEOUT / 1000);
2846 + return false;
2847 + }
2848 +
2849 + return true;
2850 +}
2851 +
2852 static bool ar9003_hw_init_cal_soc(struct ath_hw *ah,
2853 struct ath9k_channel *chan)
2854 {
2855 struct ath_common *common = ath9k_hw_common(ah);
2856 struct ath9k_hw_cal_data *caldata = ah->caldata;
2857 bool txiqcal_done = false;
2858 - bool is_reusable = true, status = true;
2859 + bool status = true;
2860 bool run_agc_cal = false, sep_iq_cal = false;
2861 + int i = 0;
2862
2863 /* Use chip chainmask only for calibration */
2864 ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);
2865 @@ -1485,7 +1584,12 @@ static bool ar9003_hw_init_cal_soc(struc
2866 * AGC calibration. Specifically, AR9550 in SoC chips.
2867 */
2868 if (ah->enabled_cals & TX_IQ_ON_AGC_CAL) {
2869 - txiqcal_done = true;
2870 + if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0,
2871 + AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL)) {
2872 + txiqcal_done = true;
2873 + } else {
2874 + txiqcal_done = false;
2875 + }
2876 run_agc_cal = true;
2877 } else {
2878 sep_iq_cal = true;
2879 @@ -1512,27 +1616,37 @@ skip_tx_iqcal:
2880 if (AR_SREV_9330_11(ah))
2881 ar9003_hw_manual_peak_cal(ah, 0, IS_CHAN_2GHZ(chan));
2882
2883 - /* Calibrate the AGC */
2884 - REG_WRITE(ah, AR_PHY_AGC_CONTROL,
2885 - REG_READ(ah, AR_PHY_AGC_CONTROL) |
2886 - AR_PHY_AGC_CONTROL_CAL);
2887 -
2888 - /* Poll for offset calibration complete */
2889 - status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
2890 - AR_PHY_AGC_CONTROL_CAL,
2891 - 0, AH_WAIT_TIMEOUT);
2892 - }
2893 + /*
2894 + * For non-AR9550 chips, we just trigger AGC calibration
2895 + * in the HW, poll for completion and then process
2896 + * the results.
2897 + *
2898 + * For AR955x, we run it multiple times and use
2899 + * median IQ correction.
2900 + */
2901 + if (!AR_SREV_9550(ah)) {
2902 + status = do_ar9003_agc_cal(ah);
2903 + if (!status)
2904 + return false;
2905
2906 - if (!status) {
2907 - ath_dbg(common, CALIBRATE,
2908 - "offset calibration failed to complete in %d ms; noisy environment?\n",
2909 - AH_WAIT_TIMEOUT / 1000);
2910 - return false;
2911 + if (txiqcal_done)
2912 + ar9003_hw_tx_iq_cal_post_proc(ah, 0, false);
2913 + } else {
2914 + if (!txiqcal_done) {
2915 + status = do_ar9003_agc_cal(ah);
2916 + if (!status)
2917 + return false;
2918 + } else {
2919 + for (i = 0; i < MAXIQCAL; i++) {
2920 + status = do_ar9003_agc_cal(ah);
2921 + if (!status)
2922 + return false;
2923 + ar9003_hw_tx_iq_cal_post_proc(ah, i, false);
2924 + }
2925 + }
2926 + }
2927 }
2928
2929 - if (txiqcal_done)
2930 - ar9003_hw_tx_iq_cal_post_proc(ah, is_reusable);
2931 -
2932 /* Revert chainmask to runtime parameters */
2933 ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
2934
2935 --- a/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
2936 +++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
2937 @@ -15,6 +15,8 @@
2938 #ifndef RTL8187_H
2939 #define RTL8187_H
2940
2941 +#include <linux/cache.h>
2942 +
2943 #include "rtl818x.h"
2944 #include "leds.h"
2945
2946 @@ -139,7 +141,10 @@ struct rtl8187_priv {
2947 u8 aifsn[4];
2948 u8 rfkill_mask;
2949 struct {
2950 - __le64 buf;
2951 + union {
2952 + __le64 buf;
2953 + u8 dummy1[L1_CACHE_BYTES];
2954 + } ____cacheline_aligned;
2955 struct sk_buff_head queue;
2956 } b_tx_status; /* This queue is used by both -b and non-b devices */
2957 struct mutex io_mutex;
2958 @@ -147,7 +152,8 @@ struct rtl8187_priv {
2959 u8 bits8;
2960 __le16 bits16;
2961 __le32 bits32;
2962 - } *io_dmabuf;
2963 + u8 dummy2[L1_CACHE_BYTES];
2964 + } *io_dmabuf ____cacheline_aligned;
2965 bool rfkill_off;
2966 u16 seqno;
2967 };
2968 --- a/net/mac80211/wme.c
2969 +++ b/net/mac80211/wme.c
2970 @@ -154,6 +154,11 @@ u16 ieee80211_select_queue(struct ieee80
2971 return IEEE80211_AC_BE;
2972 }
2973
2974 + if (skb->protocol == sdata->control_port_protocol) {
2975 + skb->priority = 7;
2976 + return ieee80211_downgrade_queue(sdata, skb);
2977 + }
2978 +
2979 /* use the data classifier to determine what 802.1d tag the
2980 * data frame has */
2981 rcu_read_lock();
2982 --- a/drivers/net/wireless/ath/ath9k/xmit.c
2983 +++ b/drivers/net/wireless/ath/ath9k/xmit.c
2984 @@ -1444,14 +1444,16 @@ void ath_tx_aggr_sleep(struct ieee80211_
2985 for (tidno = 0, tid = &an->tid[tidno];
2986 tidno < IEEE80211_NUM_TIDS; tidno++, tid++) {
2987
2988 - if (!tid->sched)
2989 - continue;
2990 -
2991 ac = tid->ac;
2992 txq = ac->txq;
2993
2994 ath_txq_lock(sc, txq);
2995
2996 + if (!tid->sched) {
2997 + ath_txq_unlock(sc, txq);
2998 + continue;
2999 + }
3000 +
3001 buffered = ath_tid_has_buffered(tid);
3002
3003 tid->sched = false;
3004 --- a/drivers/net/wireless/ath/ath9k/init.c
3005 +++ b/drivers/net/wireless/ath/ath9k/init.c
3006 @@ -943,6 +943,7 @@ static void ath9k_set_hw_capab(struct at
3007 hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
3008 hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ;
3009 hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
3010 + hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
3011
3012 hw->queues = 4;
3013 hw->max_rates = 4;
3014 --- a/net/mac80211/ieee80211_i.h
3015 +++ b/net/mac80211/ieee80211_i.h
3016 @@ -1700,14 +1700,8 @@ void ieee80211_stop_queue_by_reason(stru
3017 void ieee80211_propagate_queue_wake(struct ieee80211_local *local, int queue);
3018 void ieee80211_add_pending_skb(struct ieee80211_local *local,
3019 struct sk_buff *skb);
3020 -void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local,
3021 - struct sk_buff_head *skbs,
3022 - void (*fn)(void *data), void *data);
3023 -static inline void ieee80211_add_pending_skbs(struct ieee80211_local *local,
3024 - struct sk_buff_head *skbs)
3025 -{
3026 - ieee80211_add_pending_skbs_fn(local, skbs, NULL, NULL);
3027 -}
3028 +void ieee80211_add_pending_skbs(struct ieee80211_local *local,
3029 + struct sk_buff_head *skbs);
3030 void ieee80211_flush_queues(struct ieee80211_local *local,
3031 struct ieee80211_sub_if_data *sdata);
3032
3033 --- a/net/mac80211/sta_info.c
3034 +++ b/net/mac80211/sta_info.c
3035 @@ -91,7 +91,7 @@ static int sta_info_hash_del(struct ieee
3036 return -ENOENT;
3037 }
3038
3039 -static void cleanup_single_sta(struct sta_info *sta)
3040 +static void __cleanup_single_sta(struct sta_info *sta)
3041 {
3042 int ac, i;
3043 struct tid_ampdu_tx *tid_tx;
3044 @@ -99,7 +99,8 @@ static void cleanup_single_sta(struct st
3045 struct ieee80211_local *local = sdata->local;
3046 struct ps_data *ps;
3047
3048 - if (test_sta_flag(sta, WLAN_STA_PS_STA)) {
3049 + if (test_sta_flag(sta, WLAN_STA_PS_STA) ||
3050 + test_sta_flag(sta, WLAN_STA_PS_DRIVER)) {
3051 if (sta->sdata->vif.type == NL80211_IFTYPE_AP ||
3052 sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
3053 ps = &sdata->bss->ps;
3054 @@ -109,6 +110,7 @@ static void cleanup_single_sta(struct st
3055 return;
3056
3057 clear_sta_flag(sta, WLAN_STA_PS_STA);
3058 + clear_sta_flag(sta, WLAN_STA_PS_DRIVER);
3059
3060 atomic_dec(&ps->num_sta_ps);
3061 sta_info_recalc_tim(sta);
3062 @@ -139,7 +141,14 @@ static void cleanup_single_sta(struct st
3063 ieee80211_purge_tx_queue(&local->hw, &tid_tx->pending);
3064 kfree(tid_tx);
3065 }
3066 +}
3067
3068 +static void cleanup_single_sta(struct sta_info *sta)
3069 +{
3070 + struct ieee80211_sub_if_data *sdata = sta->sdata;
3071 + struct ieee80211_local *local = sdata->local;
3072 +
3073 + __cleanup_single_sta(sta);
3074 sta_info_free(local, sta);
3075 }
3076
3077 @@ -330,6 +339,7 @@ struct sta_info *sta_info_alloc(struct i
3078 rcu_read_unlock();
3079
3080 spin_lock_init(&sta->lock);
3081 + spin_lock_init(&sta->ps_lock);
3082 INIT_WORK(&sta->drv_unblock_wk, sta_unblock);
3083 INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work);
3084 mutex_init(&sta->ampdu_mlme.mtx);
3085 @@ -487,21 +497,26 @@ static int sta_info_insert_finish(struct
3086 goto out_err;
3087 }
3088
3089 - /* notify driver */
3090 - err = sta_info_insert_drv_state(local, sdata, sta);
3091 - if (err)
3092 - goto out_err;
3093 -
3094 local->num_sta++;
3095 local->sta_generation++;
3096 smp_mb();
3097
3098 + /* simplify things and don't accept BA sessions yet */
3099 + set_sta_flag(sta, WLAN_STA_BLOCK_BA);
3100 +
3101 /* make the station visible */
3102 sta_info_hash_add(local, sta);
3103
3104 list_add_rcu(&sta->list, &local->sta_list);
3105
3106 + /* notify driver */
3107 + err = sta_info_insert_drv_state(local, sdata, sta);
3108 + if (err)
3109 + goto out_remove;
3110 +
3111 set_sta_flag(sta, WLAN_STA_INSERTED);
3112 + /* accept BA sessions now */
3113 + clear_sta_flag(sta, WLAN_STA_BLOCK_BA);
3114
3115 ieee80211_recalc_min_chandef(sdata);
3116 ieee80211_sta_debugfs_add(sta);
3117 @@ -522,6 +537,12 @@ static int sta_info_insert_finish(struct
3118 mesh_accept_plinks_update(sdata);
3119
3120 return 0;
3121 + out_remove:
3122 + sta_info_hash_del(local, sta);
3123 + list_del_rcu(&sta->list);
3124 + local->num_sta--;
3125 + synchronize_net();
3126 + __cleanup_single_sta(sta);
3127 out_err:
3128 mutex_unlock(&local->sta_mtx);
3129 rcu_read_lock();
3130 @@ -1071,10 +1092,14 @@ struct ieee80211_sta *ieee80211_find_sta
3131 }
3132 EXPORT_SYMBOL(ieee80211_find_sta);
3133
3134 -static void clear_sta_ps_flags(void *_sta)
3135 +/* powersave support code */
3136 +void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
3137 {
3138 - struct sta_info *sta = _sta;
3139 struct ieee80211_sub_if_data *sdata = sta->sdata;
3140 + struct ieee80211_local *local = sdata->local;
3141 + struct sk_buff_head pending;
3142 + int filtered = 0, buffered = 0, ac;
3143 + unsigned long flags;
3144 struct ps_data *ps;
3145
3146 if (sdata->vif.type == NL80211_IFTYPE_AP ||
3147 @@ -1085,20 +1110,6 @@ static void clear_sta_ps_flags(void *_st
3148 else
3149 return;
3150
3151 - clear_sta_flag(sta, WLAN_STA_PS_DRIVER);
3152 - if (test_and_clear_sta_flag(sta, WLAN_STA_PS_STA))
3153 - atomic_dec(&ps->num_sta_ps);
3154 -}
3155 -
3156 -/* powersave support code */
3157 -void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
3158 -{
3159 - struct ieee80211_sub_if_data *sdata = sta->sdata;
3160 - struct ieee80211_local *local = sdata->local;
3161 - struct sk_buff_head pending;
3162 - int filtered = 0, buffered = 0, ac;
3163 - unsigned long flags;
3164 -
3165 clear_sta_flag(sta, WLAN_STA_SP);
3166
3167 BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1);
3168 @@ -1109,6 +1120,8 @@ void ieee80211_sta_ps_deliver_wakeup(str
3169
3170 skb_queue_head_init(&pending);
3171
3172 + /* sync with ieee80211_tx_h_unicast_ps_buf */
3173 + spin_lock(&sta->ps_lock);
3174 /* Send all buffered frames to the station */
3175 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
3176 int count = skb_queue_len(&pending), tmp;
3177 @@ -1127,7 +1140,12 @@ void ieee80211_sta_ps_deliver_wakeup(str
3178 buffered += tmp - count;
3179 }
3180
3181 - ieee80211_add_pending_skbs_fn(local, &pending, clear_sta_ps_flags, sta);
3182 + ieee80211_add_pending_skbs(local, &pending);
3183 + clear_sta_flag(sta, WLAN_STA_PS_DRIVER);
3184 + clear_sta_flag(sta, WLAN_STA_PS_STA);
3185 + spin_unlock(&sta->ps_lock);
3186 +
3187 + atomic_dec(&ps->num_sta_ps);
3188
3189 /* This station just woke up and isn't aware of our SMPS state */
3190 if (!ieee80211_smps_is_restrictive(sta->known_smps_mode,
3191 --- a/net/mac80211/sta_info.h
3192 +++ b/net/mac80211/sta_info.h
3193 @@ -267,6 +267,7 @@ struct ieee80211_tx_latency_stat {
3194 * @drv_unblock_wk: used for driver PS unblocking
3195 * @listen_interval: listen interval of this station, when we're acting as AP
3196 * @_flags: STA flags, see &enum ieee80211_sta_info_flags, do not use directly
3197 + * @ps_lock: used for powersave (when mac80211 is the AP) related locking
3198 * @ps_tx_buf: buffers (per AC) of frames to transmit to this station
3199 * when it leaves power saving state or polls
3200 * @tx_filtered: buffers (per AC) of frames we already tried to
3201 @@ -356,10 +357,8 @@ struct sta_info {
3202 /* use the accessors defined below */
3203 unsigned long _flags;
3204
3205 - /*
3206 - * STA powersave frame queues, no more than the internal
3207 - * locking required.
3208 - */
3209 + /* STA powersave lock and frame queues */
3210 + spinlock_t ps_lock;
3211 struct sk_buff_head ps_tx_buf[IEEE80211_NUM_ACS];
3212 struct sk_buff_head tx_filtered[IEEE80211_NUM_ACS];
3213 unsigned long driver_buffered_tids;
3214 --- a/net/mac80211/util.c
3215 +++ b/net/mac80211/util.c
3216 @@ -435,9 +435,8 @@ void ieee80211_add_pending_skb(struct ie
3217 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
3218 }
3219
3220 -void ieee80211_add_pending_skbs_fn(struct ieee80211_local *local,
3221 - struct sk_buff_head *skbs,
3222 - void (*fn)(void *data), void *data)
3223 +void ieee80211_add_pending_skbs(struct ieee80211_local *local,
3224 + struct sk_buff_head *skbs)
3225 {
3226 struct ieee80211_hw *hw = &local->hw;
3227 struct sk_buff *skb;
3228 @@ -461,9 +460,6 @@ void ieee80211_add_pending_skbs_fn(struc
3229 __skb_queue_tail(&local->pending[queue], skb);
3230 }
3231
3232 - if (fn)
3233 - fn(data);
3234 -
3235 for (i = 0; i < hw->queues; i++)
3236 __ieee80211_wake_queue(hw, i,
3237 IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
3238 --- a/net/wireless/reg.c
3239 +++ b/net/wireless/reg.c
3240 @@ -1700,7 +1700,7 @@ static void reg_process_hint(struct regu
3241 return;
3242 case NL80211_REGDOM_SET_BY_USER:
3243 treatment = reg_process_hint_user(reg_request);
3244 - if (treatment == REG_REQ_OK ||
3245 + if (treatment == REG_REQ_IGNORE ||
3246 treatment == REG_REQ_ALREADY_SET)
3247 return;
3248 schedule_delayed_work(&reg_timeout, msecs_to_jiffies(3142));
3249 --- a/drivers/net/wireless/ath/ath9k/debug.c
3250 +++ b/drivers/net/wireless/ath/ath9k/debug.c
3251 @@ -866,6 +866,12 @@ static ssize_t read_file_reset(struct fi
3252 "%17s: %2d\n", "PLL RX Hang",
3253 sc->debug.stats.reset[RESET_TYPE_PLL_HANG]);
3254 len += scnprintf(buf + len, sizeof(buf) - len,
3255 + "%17s: %2d\n", "MAC Hang",
3256 + sc->debug.stats.reset[RESET_TYPE_MAC_HANG]);
3257 + len += scnprintf(buf + len, sizeof(buf) - len,
3258 + "%17s: %2d\n", "Stuck Beacon",
3259 + sc->debug.stats.reset[RESET_TYPE_BEACON_STUCK]);
3260 + len += scnprintf(buf + len, sizeof(buf) - len,
3261 "%17s: %2d\n", "MCI Reset",
3262 sc->debug.stats.reset[RESET_TYPE_MCI]);
3263