package/network/services/igmpproxy/files/igmpproxy.init

   1 #!/bin/sh /etc/rc.common
   2 # Copyright (C) 2010-2014 OpenWrt.org
   3
   4 START=99
   5 USE_PROCD=1
   6 PROG=/usr/sbin/igmpproxy
   7 CONFIGFILE=/var/etc/igmpproxy.conf
   8
   9 # igmpproxy supports both a debug mode and verbosity, which are very useful
  10 # when something isn't working.
  11 #
  12 # Debug mode will print everything to stdout instead of syslog. Generally
  13 # verbosity should NOT be set as it will quickly fill your syslog.
  14 #
  15 # Put any debug or verbosity options into IGMP_OPTS
  16 #
  17 # Examples:
  18 # OPTIONS="-d -v -v" - debug mode and very verbose, this will land in
  19 #                        stdout and not in syslog
  20 # OPTIONS="-v" - be verbose, this will write aditional information to syslog
  21
  22 OPTIONS=""
  23
  24 igmp_header() {
  25         local quickleave
  26         config_get_bool quickleave "$1" quickleave 0
  27
  28         mkdir -p /var/etc
  29         rm -f /var/etc/igmpproxy.conf
  30         [ $quickleave -gt 0 ] && echo "quickleave" >> /var/etc/igmpproxy.conf
  31
  32         [ -L /etc/igmpproxy.conf ] || ln -nsf /var/etc/igmpproxy.conf /etc/igmpproxy.conf
  33 }
  34
  35 igmp_add_phyint() {
  36         local network direction altnets device up
  37
  38         config_get network $1 network
  39         config_get direction $1 direction
  40         config_get altnets $1 altnet
  41
  42         json_load "$(ifstatus $network)"
  43         json_get_var device l3_device
  44         json_get_var up up
  45
  46         [ -n "$device" -a "$up" = "1" ] || {
  47                 procd_append_param error "$network is not up"
  48                 return;
  49         }
  50
  51         echo -e "\nphyint $device $direction ratelimit 0 threshold 1" >> /var/etc/igmpproxy.conf
  52
  53         if [ -n "$altnets" ]; then
  54                 local altnet
  55                 for altnet in $altnets; do
  56                         echo -e "\taltnet $altnet" >> /var/etc/igmpproxy.conf
  57                 done
  58         fi
  59 }
  60
  61 igmp_add_network() {
  62         local network
  63
  64         config_get network $1 network
  65         procd_add_interface_trigger "interface.*" $network /etc/init.d/igmpproxy restart
  66 }
  67
  68 igmp_add_firewall_routing() {
  69         config_get network $1 network
  70         config_get direction $1 direction
  71
  72         [[ "$direction" = "downstream" ]] || return 0
  73
  74         json_add_object ""
  75         json_add_string type rule
  76         json_add_string src "$upstream"
  77         json_add_string dest "$network"
  78         json_add_string family ipv4
  79         json_add_string proto udp
  80         json_add_string dest_ip "224.0.0.0/4"
  81         json_add_string target ACCEPT
  82         json_close_object
  83 }
  84
  85 igmp_add_firewall_network() {
  86         config_get network $1 network
  87         config_get direction $1 direction
  88
  89         json_add_object ""
  90         json_add_string type rule
  91         json_add_string src "$network"
  92         json_add_string proto igmp
  93         json_add_string target ACCEPT
  94         json_close_object
  95
  96         [[ "$direction" = "upstream" ]] && {
  97                 upstream="$network"
  98                 config_foreach igmp_add_firewall_routing phyint
  99         }
 100 }
 101
 102 service_triggers() {
 103         procd_add_reload_trigger "igmpproxy"
 104 }
 105
 106 start_service() {
 107         config_load igmpproxy
 108
 109         procd_open_instance
 110         config_foreach igmp_header igmpproxy
 111         config_foreach igmp_add_phyint phyint
 112         procd_set_param command $PROG
 113         [ -n "$OPTIONS" ] && procd_append_param $OPTIONS
 114         procd_append_param command $CONFIGFILE
 115         procd_set_param file $CONFIGFILE
 116         procd_set_param respawn
 117         procd_open_trigger
 118         config_foreach igmp_add_network phyint
 119         procd_close_trigger
 120
 121         procd_open_data
 122
 123         json_add_array firewall
 124         config_foreach igmp_add_firewall_network phyint
 125         json_close_array
 126
 127         procd_close_data
 128
 129         procd_close_instance
 130 }
 131
 132 service_started() {
 133         procd_set_config_changed firewall
 134 }