target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c

   1 /*
   2  *  $Id$
   3  *
   4  *  Mikrotik RouterBOARDs 111/112/133/133C/150/153
   5  *
   6  *  Copyright (C) 2007 OpenWrt.org
   7  *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
   8  *
   9  *  This program is free software; you can redistribute it and/or
  10  *  modify it under the terms of the GNU General Public License
  11  *  as published by the Free Software Foundation; either version 2
  12  *  of the License, or (at your option) any later version.
  13  *
  14  *  This program is distributed in the hope that it will be useful,
  15  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *  GNU General Public License for more details.
  18  *
  19  *  You should have received a copy of the GNU General Public License
  20  *  along with this program; if not, write to the
  21  *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  22  *  Boston, MA  02110-1301, USA.
  23  *
  24  */
  25
  26 #include <linux/kernel.h>
  27 #include <linux/init.h>
  28
  29 #include <asm/bootinfo.h>
  30 #include <asm/gpio.h>
  31
  32 #include <asm/mach-adm5120/adm5120_board.h>
  33 #include <asm/mach-adm5120/adm5120_platform.h>
  34
  35 static struct mtd_partition rb1xx_partitions[] = {
  36         {
  37                 .name   = "booter",
  38                 .offset = 0,
  39                 .size   = 64*1024,
  40                 .mask_flags = MTD_WRITEABLE,
  41         } , {
  42                 .name   = "firmware",
  43                 .offset = MTDPART_OFS_APPEND,
  44                 .size   = MTDPART_SIZ_FULL,
  45         }
  46 };
  47
  48 static struct platform_device *rb1xx_devices[] __initdata = {
  49         &adm5120_flash0_device,
  50         &adm5120_nand_device,
  51 };
  52
  53 static struct platform_device *rb150_devices[] __initdata = {
  54         &adm5120_flash0_device,
  55         /* TODO: nand device is not yet supported */
  56 };
  57
  58 static void __init rb1xx_setup(void)
  59 {
  60         /* setup data for flash0 device */
  61         adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions);
  62         adm5120_flash0_data.parts = rb1xx_partitions;
  63
  64         /* TODO: setup mac address */
  65 }
  66
  67 #if 0
  68 /*
  69  * RB1xx boards have bad network performance with the default VLAN matrixes.
  70  * Disable it while the ethernet driver gets fixed.
  71  */
  72 static unsigned char rb11x_vlans[6] __initdata = {
  73         /* FIXME: untested */
  74         0x41, 0x00, 0x00, 0x00, 0x00, 0x00
  75 };
  76
  77 static unsigned char rb133_vlans[6] __initdata = {
  78         /* FIXME: untested */
  79         0x44, 0x42, 0x41, 0x00, 0x00, 0x00
  80 };
  81
  82 static unsigned char rb133c_vlans[6] __initdata = {
  83         /* FIXME: untested */
  84         0x44, 0x00, 0x00, 0x00, 0x00, 0x00
  85 };
  86
  87 static unsigned char rb15x_vlans[6] __initdata = {
  88         /* FIXME: untested */
  89         0x41, 0x42, 0x44, 0x48, 0x50, 0x00
  90 };
  91 #else
  92 static unsigned char rb_vlans[6] __initdata = {
  93         0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
  94 };
  95 #define rb11x_vlans     rb_vlans
  96 #define rb133_vlans     rb_vlans
  97 #define rb133c_vlans    rb_vlans
  98 #define rb15x_vlans     rb_vlans
  99 #endif
 100
 101 static struct adm5120_board rb111_board __initdata = {
 102         .mach_type      = MACH_ADM5120_RB_111,
 103         .name           = "Mikrotik RouterBOARD 111",
 104         .board_setup    = rb1xx_setup,
 105         .eth_num_ports  = 1,
 106         .eth_vlans      = rb11x_vlans,
 107         .num_devices    = ARRAY_SIZE(rb1xx_devices),
 108         .devices        = rb1xx_devices,
 109 };
 110
 111 static struct adm5120_board rb112_board __initdata = {
 112         .mach_type      = MACH_ADM5120_RB_112,
 113         .name           = "Mikrotik RouterBOARD 112",
 114         .board_setup    = rb1xx_setup,
 115         .eth_num_ports  = 1,
 116         .eth_vlans      = rb11x_vlans,
 117         .num_devices    = ARRAY_SIZE(rb1xx_devices),
 118         .devices        = rb1xx_devices,
 119 };
 120
 121 static struct adm5120_board rb133_board __initdata = {
 122         .mach_type      = MACH_ADM5120_RB_133,
 123         .name           = "Mikrotik RouterBOARD 133",
 124         .board_setup    = rb1xx_setup,
 125         .eth_num_ports  = 3,
 126         .eth_vlans      = rb133_vlans,
 127         .num_devices    = ARRAY_SIZE(rb1xx_devices),
 128         .devices        = rb1xx_devices,
 129 };
 130
 131 static struct adm5120_board rb133c_board __initdata = {
 132         .mach_type      = MACH_ADM5120_RB_133C,
 133         .name           = "Mikrotik RouterBOARD 133C",
 134         .board_setup    = rb1xx_setup,
 135         .eth_num_ports  = 1,
 136         .eth_vlans      = rb133c_vlans,
 137         .num_devices    = ARRAY_SIZE(rb1xx_devices),
 138         .devices        = rb1xx_devices,
 139 };
 140
 141 static struct adm5120_board rb150_board __initdata = {
 142         .mach_type      = MACH_ADM5120_RB_150,
 143         .name           = "Mikrotik RouterBOARD 150",
 144         .board_setup    = rb1xx_setup,
 145         .eth_num_ports  = 5,
 146         .eth_vlans      = rb15x_vlans,
 147         .num_devices    = ARRAY_SIZE(rb150_devices),
 148         .devices        = rb150_devices,
 149 };
 150
 151 static struct adm5120_board rb153_board __initdata = {
 152         .mach_type      = MACH_ADM5120_RB_153,
 153         .name           = "Mikrotik RouterBOARD 153",
 154         .board_setup    = rb1xx_setup,
 155         .eth_num_ports  = 5,
 156         .eth_vlans      = rb15x_vlans,
 157         .num_devices    = ARRAY_SIZE(rb1xx_devices),
 158         .devices        = rb1xx_devices,
 159 };
 160
 161 static int __init register_boards(void)
 162 {
 163         adm5120_board_register(&rb111_board);
 164         adm5120_board_register(&rb112_board);
 165         adm5120_board_register(&rb133_board);
 166         adm5120_board_register(&rb133c_board);
 167         adm5120_board_register(&rb150_board);
 168         adm5120_board_register(&rb153_board);
 169         return 0;
 170 }
 171
 172 pure_initcall(register_boards);