apm821xx: add support for the Cisco Meraki MR24
[openwrt/staging/chunkeey.git] / target / linux / apm821xx / dts / MR24.dts
1 /*
2 * Device Tree Source for Meraki MR24 (Ikarem)
3 *
4 * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
5 *
6 * Based on Cisco Meraki GPL Release r23-20150601 MR24 DTS
7 *
8 * This file is licensed under the terms of the GNU General Public
9 * License version 2. This program is licensed "as is" without
10 * any warranty of any kind, whether express or implied.
11 */
12
13 /dts-v1/;
14
15 / {
16 #address-cells = <2>;
17 #size-cells = <1>;
18 model = "Meraki MR24 Access Point";
19 compatible = "meraki,ikarem";
20 dcr-parent = <&{/cpus/cpu@0}>;
21
22 aliases {
23 ethernet0 = &EMAC0;
24 serial0 = &UART0;
25 };
26
27 cpus {
28 #address-cells = <1>;
29 #size-cells = <0>;
30
31 cpu@0 {
32 device_type = "cpu";
33 model = "PowerPC,apm821xx";
34 reg = <0x00000000>;
35 clock-frequency = <0>; /* Filled in by U-Boot */
36 timebase-frequency = <0>; /* Filled in by U-Boot */
37 i-cache-line-size = <32>;
38 d-cache-line-size = <32>;
39 i-cache-size = <32768>;
40 d-cache-size = <32768>;
41 dcr-controller;
42 dcr-access-method = "native";
43 next-level-cache = <&L2C0>;
44 };
45 };
46
47 memory {
48 device_type = "memory";
49 reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
50 };
51
52 UIC0: interrupt-controller0 {
53 compatible = "ibm,uic";
54 interrupt-controller;
55 cell-index = <0>;
56 dcr-reg = <0x0c0 0x009>;
57 #address-cells = <0>;
58 #size-cells = <0>;
59 #interrupt-cells = <2>;
60 };
61
62 UIC1: interrupt-controller1 {
63 compatible = "ibm,uic";
64 interrupt-controller;
65 cell-index = <1>;
66 dcr-reg = <0x0d0 0x009>;
67 #address-cells = <0>;
68 #size-cells = <0>;
69 #interrupt-cells = <2>;
70 interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
71 interrupt-parent = <&UIC0>;
72 };
73
74 UIC2: interrupt-controller2 {
75 compatible = "ibm,uic";
76 interrupt-controller;
77 cell-index = <2>;
78 dcr-reg = <0x0e0 0x009>;
79 #address-cells = <0>;
80 #size-cells = <0>;
81 #interrupt-cells = <2>;
82 interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
83 interrupt-parent = <&UIC0>;
84 };
85
86 UIC3: interrupt-controller3 {
87 compatible = "ibm,uic";
88 interrupt-controller;
89 cell-index = <3>;
90 dcr-reg = <0x0f0 0x009>;
91 #address-cells = <0>;
92 #size-cells = <0>;
93 #interrupt-cells = <2>;
94 interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
95 interrupt-parent = <&UIC0>;
96 };
97
98 /* KPH check the following */
99 OCM: ocm@400040000 {
100 compatible = "ibm,ocm";
101 status = "okay";
102 cell-index = <1>;
103 /* configured in U-Boot */
104 reg = <4 0x00040000 0x8000>; /* 32K */
105 };
106
107 SDR0: sdr {
108 compatible = "ibm,sdr-apm821xx";
109 dcr-reg = <0x00e 0x002>;
110 };
111
112 CPR0: cpr {
113 compatible = "ibm,cpr-apm821xx";
114 dcr-reg = <0x00c 0x002>;
115 };
116
117 L2C0: l2c {
118 compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
119 dcr-reg = <0x020 0x008
120 0x030 0x008>;
121 cache-line-size = <32>;
122 cache-size = <262144>;
123 interrupt-parent = <&UIC1>;
124 interrupts = <11 1>;
125 };
126
127 /* kph check the below */
128 CPM0: cpm {
129 compatible = "ibm,cpm-apm821xx", "ibm,cpm";
130 cell-index = <0>;
131 dcr-reg = <0x160 0x003>;
132 pm-cpu = <0x02000000>;
133 pm-doze = <0x302570F0>;
134 pm-nap = <0x302570F0>;
135 pm-deepsleep = <0x302570F0>;
136 pm-iic-device = <&IIC0>;
137 pm-emac-device = <&EMAC0>;
138 };
139
140 plb {
141 compatible = "ibm,plb4";
142 #address-cells = <2>;
143 #size-cells = <1>;
144 ranges;
145 clock-frequency = <0>; /* Filled in by U-Boot */
146
147 SDRAM0: sdram {
148 compatible = "ibm,sdram-apm821xx";
149 dcr-reg = <0x010 0x002>;
150 };
151
152 /* kph check the below */
153 CRYPTO: crypto@180000 {
154 compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
155 reg = <4 0x00180000 0x80400>;
156 interrupt-parent = <&UIC0>;
157 interrupts = <0x1d 0x4>;
158 };
159
160 /* kph check the below */
161 PKA: pka@114000 {
162 device_type = "pka";
163 compatible = "ppc4xx-pka", "amcc,ppc4xx-pka";
164 reg = <4 0x00114000 0x4000>;
165 interrupt-parent = <&UIC0>;
166 interrupts = <0x14 0x2>;
167 };
168
169 /* kph check the below */
170 TRNG: trng@110000 {
171 compatible = "ppc4xx-trng", "amcc,ppc460ex-rng";
172 reg = <4 0x00110000 0x50>;
173 interrupt-parent = <&UIC1>;
174 interrupts = <0x3 0x2>;
175 };
176
177 MAL0: mcmal {
178 compatible = "ibm,mcmal2";
179 descriptor-memory = "ocm";
180 dcr-reg = <0x180 0x062>;
181 num-tx-chans = <1>;
182 num-rx-chans = <1>;
183 #address-cells = <0>;
184 #size-cells = <0>;
185 interrupt-parent = <&UIC2>;
186 interrupts = < /*TXEOB*/ 0x6 0x4
187 /*RXEOB*/ 0x7 0x4
188 /*SERR*/ 0x3 0x4
189 /*TXDE*/ 0x4 0x4
190 /*RXDE*/ 0x5 0x4>;
191 };
192
193 POB0: opb {
194 compatible = "ibm,opb";
195 #address-cells = <1>;
196 #size-cells = <1>;
197 ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
198 clock-frequency = <0>; /* Filled in by U-Boot */
199
200 EBC0: ebc {
201 compatible = "ibm,ebc";
202 dcr-reg = <0x012 0x002>;
203 #address-cells = <2>;
204 #size-cells = <1>;
205 clock-frequency = <0>; /* Filled in by U-Boot */
206 /* ranges property is supplied by U-Boot */
207 ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>;
208 interrupts = <0x6 0x4>;
209 interrupt-parent = <&UIC1>;
210
211 /* Ikarem has 32MB of NAND */
212 ndfc@1,0 {
213 compatible = "ibm,ndfc";
214 reg = <00000003 00000000 00000400>;
215 ccr = <0x00001000>;
216 bank-settings = <0x80002222>;
217 #address-cells = <1>;
218 #size-cells = <1>;
219 /* 32 MiB NAND Flash */
220 nand {
221 #address-cells = <1>;
222 #size-cells = <1>;
223 partition@0 {
224 label = "u-boot";
225 reg = <0x00000000 0x00170000>;
226 read-only;
227 };
228 partition@170000 {
229 label = "oops";
230 reg = <0x00170000 0x00010000>;
231 };
232 partition@180000 {
233 label = "ubi";
234 reg = <0x00180000 0x01e80000>;
235 };
236 };
237 };
238 };
239
240 UART0: serial@ef600400 {
241 device_type = "serial";
242 compatible = "ns16550";
243 reg = <0xef600400 0x00000008>;
244 virtual-reg = <0xef600400>;
245 clock-frequency = <0>; /* Filled in by U-Boot */
246 current-speed = <0>; /* Filled in by U-Boot */
247 interrupt-parent = <&UIC0>;
248 interrupts = <0x1 0x4>;
249 };
250
251 GPIO0: gpio@ef600b00 {
252 compatible = "ibm,ppc4xx-gpio";
253 reg = <0xef600b00 0x00000048>;
254 #gpio-cells = <2>;
255 gpio-controller;
256 };
257
258 gpio-leds {
259 compatible = "gpio-leds";
260 power-green {
261 label = "mr24:green:power";
262 gpios = <&GPIO0 18 1>;
263 };
264 power-orange {
265 label = "mr24:orange:power";
266 gpios = <&GPIO0 19 1>;
267 };
268 lan {
269 label = "mr24:green:wan";
270 gpios = <&GPIO0 17 1>;
271 };
272 ssi-0 {
273 label = "mr24:green:wifi1";
274 gpios = <&GPIO0 23 1>;
275 };
276 ssi-1 {
277 label = "mr24:green:wifi2";
278 gpios = <&GPIO0 22 1>;
279 };
280 ssi-2 {
281 label = "mr24:green:wifi3";
282 gpios = <&GPIO0 21 1>;
283 };
284 ssi-3 {
285 label = "mr24:green:wifi4";
286 gpios = <&GPIO0 20 1>;
287 };
288 };
289
290 gpio_keys_polled {
291 compatible = "gpio-keys-polled";
292 #address-cells = <1>;
293 #size-cells = <0>;
294 poll-interval = <60>; /* 3 * 20 = 60ms */
295 autorepeat;
296 button@1 {
297 label = "Reset button";
298 linux,code = <0x198>; /* KEY_RESTART */
299 gpios = <&GPIO0 16 1>;
300 };
301 };
302
303 IIC0: i2c@ef600700 {
304 compatible = "ibm,iic";
305 reg = <0xef600700 0x00000014>;
306 interrupt-parent = <&UIC0>;
307 interrupts = <0x2 0x4>;
308 #address-cells = <1>;
309 #size-cells = <0>;
310 /* Boot ROM is at 0x52-0x53, do not touch */
311 /* Unknown chip at 0x6e, not sure what it is */
312 };
313
314 IIC1: i2c@ef600800 {
315 compatible = "ibm,iic";
316 reg = <0xef600800 0x00000014>;
317 interrupt-parent = <&UIC0>;
318 interrupts = <0x3 0x4>;
319 };
320
321 RGMII0: emac-rgmii@ef601500 {
322 compatible = "ibm,rgmii";
323 reg = <0xef601500 0x00000008>;
324 has-mdio;
325 };
326
327 TAH0: emac-tah@ef601350 {
328 compatible = "ibm,tah";
329 reg = <0xef601350 0x00000030>;
330 };
331
332 EMAC0: ethernet@ef600c00 {
333 device_type = "network";
334 compatible = "ibm,emac-apm821xx", "ibm,emac4sync";
335 interrupt-parent = <&EMAC0>;
336 interrupts = <0x0 0x1>;
337 #interrupt-cells = <1>;
338 #address-cells = <0>;
339 #size-cells = <0>;
340 interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
341 /*Wake*/ 0x1 &UIC2 0x14 0x4>;
342 reg = <0xef600c00 0x000000c4>;
343 local-mac-address = [000000000000]; /* Filled in by U-Boot */
344 mal-device = <&MAL0>;
345 mal-tx-channel = <0>;
346 mal-rx-channel = <0>;
347 cell-index = <0>;
348 max-frame-size = <9000>;
349 rx-fifo-size = <16384>;
350 tx-fifo-size = <2048>;
351 phy-mode = "rgmii";
352 phy-map = <0x00000000>;
353 rgmii-device = <&RGMII0>;
354 rgmii-channel = <0>;
355 tah-device = <&TAH0>;
356 tah-channel = <0>;
357 has-inverted-stacr-oc;
358 has-new-stacr-staopc;
359 };
360 };
361
362 PCIE0: pciex@d00000000 {
363 device_type = "pci";
364 #interrupt-cells = <1>;
365 #size-cells = <2>;
366 #address-cells = <3>;
367 compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
368 primary;
369 port = <0x0>; /* port number */
370 reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
371 0x0000000c 0x08010000 0x00001000>; /* Registers */
372 dcr-reg = <0x100 0x020>;
373 sdr-base = <0x300>;
374
375 /* Outbound ranges, one memory and one IO,
376 * later cannot be changed
377 */
378 ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
379 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
380 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
381
382 /* Inbound 2GB range starting at 0 */
383 dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
384
385 /* This drives busses 40 to 0x7f */
386 bus-range = <0x40 0x7f>;
387
388 /* Legacy interrupts (note the weird polarity, the bridge seems
389 * to invert PCIe legacy interrupts).
390 * We are de-swizzling here because the numbers are actually for
391 * port of the root complex virtual P2P bridge. But I want
392 * to avoid putting a node for it in the tree, so the numbers
393 * below are basically de-swizzled numbers.
394 * The real slot is on idsel 0, so the swizzling is 1:1
395 */
396 interrupt-map-mask = <0x0 0x0 0x0 0x7>;
397 interrupt-map = <
398 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
399 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
400 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
401 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
402 };
403
404 MSI: ppc4xx-msi@C10000000 {
405 compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
406 reg = < 0xC 0x10000000 0x100
407 0xC 0x10000000 0x100>;
408 sdr-base = <0x36C>;
409 msi-data = <0x00004440>;
410 msi-mask = <0x0000ffe0>;
411 interrupts =<0 1 2 3 4 5 6 7>;
412 interrupt-parent = <&MSI>;
413 #interrupt-cells = <1>;
414 #address-cells = <0>;
415 #size-cells = <0>;
416 msi-available-ranges = <0x0 0x100>;
417 interrupt-map = <
418 0 &UIC3 0x18 1
419 1 &UIC3 0x19 1
420 2 &UIC3 0x1A 1
421 3 &UIC3 0x1B 1
422 4 &UIC3 0x1C 1
423 5 &UIC3 0x1D 1
424 6 &UIC3 0x1E 1
425 7 &UIC3 0x1F 1
426 >;
427 };
428 };
429
430 chosen {
431 linux,stdout-path = "/plb/opb/serial@ef600400";
432 };
433 };