target/linux/ath79/dts/ar7242_avm_fritz300e.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "avm,fritz300e", "qca,ar7242";
  11         model = "AVM FRITZ!WLAN Repeater 300E";
  12
  13         aliases {
  14                 led-status = &power;
  15         };
  16
  17         memory@0 {
  18                 device_type = "memory";
  19                 reg = <0x0 0x4000000>;
  20         };
  21
  22         gpio-keys {
  23                 compatible = "gpio-keys-polled";
  24                 #address-cells = <1>;
  25                 #size-cells = <0>;
  26                 poll-interval = <20>;
  27
  28                 wps {
  29                         label = "wps";
  30                         linux,code = <KEY_WPS_BUTTON>;
  31                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 power: power {
  40                         label = "fritz300e:green:power";
  41                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  42                         default-state = "on";
  43                 };
  44
  45                 lan {
  46                         label = "fritz300e:green:lan";
  47                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wlan {
  51                         label = "fritz300e:green:wlan";
  52                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  53                         linux,default-trigger = "phy0tpt";
  54                 };
  55         };
  56
  57         ath9k-leds {
  58                 compatible = "gpio-leds";
  59
  60                 rssi0 {
  61                         label = "fritz300e:green:rssi0";
  62                         gpios = <&ath9k 10 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 rssi1 {
  66                         label = "fritz300e:green:rssi1";
  67                         gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 rssi2 {
  71                         label = "fritz300e:green:rssi2";
  72                         gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 rssi3 {
  76                         label = "fritz300e:green:rssi3";
  77                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  78                 };
  79
  80                 rssi4 {
  81                         label = "fritz300e:green:rssi4";
  82                         gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
  83                 };
  84         };
  85
  86         eth-phy-reset {
  87                 compatible = "regulator-fixed";
  88
  89                 regulator-name = "eth-phy-reset";
  90                 regulator-min-microvolt = <3300000>;
  91                 regulator-max-microvolt = <3300000>;
  92
  93                 gpio = <&gpio 11 GPIO_ACTIVE_LOW>;
  94                 startup-delay-us = <300000>;
  95                 enable-active-high;
  96
  97                 regulator-always-on;
  98         };
  99 };
 100
 101 &spi {
 102         status = "okay";
 103         num-cs = <1>;
 104
 105         flash@0 {
 106                 #address-cells = <1>;
 107                 #size-cells = <1>;
 108                 compatible = "jedec,spi-nor";
 109                 reg = <0>;
 110                 spi-max-frequency = <25000000>;
 111
 112                 partitions {
 113                         compatible = "fixed-partitions";
 114                         #address-cells = <1>;
 115                         #size-cells = <1>;
 116
 117                         partition@0 {
 118                                 reg = <0x0 0x20000>;
 119                                 label = "urloader";
 120                                 read-only;
 121                         };
 122
 123                         partition@20000 {
 124                                 reg = <0x20000 0xee0000>;
 125                                 label = "firmware";
 126                         };
 127
 128                         partition@f00000 {
 129                                 reg = <0xf00000 0x80000>;
 130                                 label = "tffs (1)";
 131                                 read-only;
 132                         };
 133
 134                         partition@f80000 {
 135                                 reg = <0xf80000 0x80000>;
 136                                 label = "tffs (2)";
 137                                 read-only;
 138                         };
 139                 };
 140         };
 141 };
 142
 143 &uart {
 144         status = "okay";
 145 };
 146
 147 &pcie {
 148         status = "okay";
 149
 150         ath9k: wifi@0 {
 151                 reg = <0x0000 0 0 0 0>;
 152                 #gpio-cells = <2>;
 153                 gpio-controller;
 154                 qca,no-eeprom;
 155         };
 156 };
 157
 158 &mdio0 {
 159         status = "okay";
 160
 161         phy0: ethernet-phy@0 {
 162                 reg = <0>;
 163                 phy-mode = "rgmii";
 164         };
 165 };
 166
 167 &eth0 {
 168         status = "okay";
 169
 170         phy-mode = "rgmii";
 171         phy-handle = <&phy0>;
 172
 173         pll-data = <0x16000000 0x00000101 0x00001313>;
 174 };