target/linux/bcm63xx/patches-5.4/548-board_dsl-2751b_e1.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -136,6 +136,72 @@ static struct board_info __initdata boar
   4                 },
   5         },
   6  };
   7 +
   8 +static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
   9 +       { .offset = 96, .value = 0x2046 },
  10 +       { .offset = 97, .value = 0xfe9d },
  11 +       { .offset = 98, .value = 0x1854 },
  12 +       { .offset = 99, .value = 0xfa59 },
  13 +       { .offset = 112, .value = 0x2046 },
  14 +       { .offset = 113, .value = 0xfe79 },
  15 +       { .offset = 114, .value = 0x17f5 },
  16 +       { .offset = 115, .value = 0xfa47 },
  17 +       { .offset = 161, .value = 0x2222 },
  18 +       { .offset = 162, .value = 0x2222 },
  19 +       { .offset = 169, .value = 0x2222 },
  20 +       { .offset = 170, .value = 0x2222 },
  21 +       { .offset = 171, .value = 0x5555 },
  22 +       { .offset = 172, .value = 0x5555 },
  23 +       { .offset = 173, .value = 0x4444 },
  24 +       { .offset = 174, .value = 0x4444 },
  25 +       { .offset = 175, .value = 0x5555 },
  26 +       { .offset = 176, .value = 0x5555 },
  27 +};
  28 +
  29 +static struct board_info __initdata board_dsl_2751b_d1 = {
  30 +       .name = "AW5200B",
  31 +       .expected_cpu_id = 0x6318,
  32 +
  33 +       .has_pci = 1,
  34 +       .has_ohci0 = 1,
  35 +       .has_ehci0 = 1,
  36 +       .num_usbh_ports = 1,
  37 +
  38 +       .has_enetsw = 1,
  39 +       .enetsw = {
  40 +               .used_ports = {
  41 +                       [0] = {
  42 +                               .used = 1,
  43 +                               .phy_id = 1,
  44 +                               .name = "Port 1",
  45 +                       },
  46 +                       [1] = {
  47 +                               .used = 1,
  48 +                               .phy_id = 2,
  49 +                               .name = "Port 2",
  50 +                       },
  51 +                       [2] = {
  52 +                               .used = 1,
  53 +                               .phy_id = 3,
  54 +                               .name = "Port 3",
  55 +                       },
  56 +                       [3] = {
  57 +                               .used = 1,
  58 +                               .phy_id = 4,
  59 +                               .name = "Port 4",
  60 +                       },
  61 +               },
  62 +       },
  63 +
  64 +       .use_fallback_sprom = 1,
  65 +       .fallback_sprom = {
  66 +               .type = SPROM_BCM43217,
  67 +               .pci_bus = 1,
  68 +               .pci_dev = 0,
  69 +               .board_fixups = dsl2751b_e1_fixups,
  70 +               .num_board_fixups = ARRAY_SIZE(dsl2751b_e1_fixups),
  71 +       },
  72 +};
  73  #endif /* CONFIG_BCM63XX_CPU_6318 */
  74
  75  /*
  76 @@ -1938,6 +2004,7 @@ static const struct board_info __initcon
  77  #ifdef CONFIG_BCM63XX_CPU_6318
  78         &board_96318ref,
  79         &board_96318ref_p300,
  80 +       &board_dsl_2751b_d1,
  81  #endif /* CONFIG_BCM63XX_CPU_6318 */
  82  #ifdef CONFIG_BCM63XX_CPU_6328
  83         &board_96328avng,
  84 @@ -2028,6 +2095,7 @@ static struct of_device_id const bcm963x
  85  #ifdef CONFIG_BCM63XX_CPU_6318
  86         { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
  87         { .compatible = "brcm,bcm96318ref-p300", .data = &board_96318ref_p300, },
  88 +       { .compatible = "d-link,dsl-275xb-d1", .data = &board_dsl_2751b_d1, },
  89  #endif
  90  #ifdef CONFIG_BCM63XX_CPU_6328
  91         { .compatible = "adb,a4001n", .data = &board_A4001N, },