target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "EnGenius EMR3500";
  10         compatible = "engenius,emr3500";
  11
  12         soc {
  13                 rng@22000 {
  14                         status = "okay";
  15                 };
  16
  17                 mdio@90000 {
  18                         status = "okay";
  19                 };
  20
  21                 ess-psgmii@98000 {
  22                         status = "okay";
  23                 };
  24
  25                 tcsr@1949000 {
  26                         compatible = "qcom,tcsr";
  27                         reg = <0x1949000 0x100>;
  28                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  29                 };
  30
  31                 ess_tcsr@1953000 {
  32                         compatible = "qcom,tcsr";
  33                         reg = <0x1953000 0x1000>;
  34                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  35                 };
  36
  37                 tcsr@1957000 {
  38                         compatible = "qcom,tcsr";
  39                         reg = <0x1957000 0x100>;
  40                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  41                 };
  42
  43                 usb2_hs_phy: hsphy@a8000 {
  44                         status = "okay";
  45                 };
  46
  47                 crypto@8e3a000 {
  48                         status = "okay";
  49                 };
  50
  51                 watchdog@b017000 {
  52                         status = "okay";
  53                 };
  54
  55                 ess-switch@c000000 {
  56                         status = "okay";
  57                 };
  58
  59                 edma@c080000 {
  60                         status = "okay";
  61                 };
  62         };
  63
  64         keys {
  65                 compatible = "gpio-keys";
  66
  67                 reset {
  68                         label = "reset";
  69                         gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
  70                         linux,code = <KEY_RESTART>;
  71                 };
  72         };
  73
  74         aliases {
  75                 led-boot = &power;
  76                 led-failsafe = &power;
  77                 led-running = &power;
  78                 led-upgrade = &power;
  79         };
  80
  81         leds {
  82                 compatible = "gpio-leds";
  83
  84                 power: white {
  85                         label = "white:power";
  86                         gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
  87                 };
  88
  89                 blue {
  90                         label = "blue";
  91                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
  92                 };
  93
  94                 red {
  95                         label = "red";
  96                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
  97                 };
  98
  99                 orange {
 100                         label = "orange";
 101                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 102                 };
 103         };
 104 };
 105
 106 &tlmm {
 107         serial_pins: serial_pinmux {
 108                 mux {
 109                         pins = "gpio60", "gpio61";
 110                         function = "blsp_uart0";
 111                         bias-disable;
 112                 };
 113         };
 114
 115         spi_0_pins: spi_0_pinmux {
 116                 pin {
 117                         function = "blsp_spi0";
 118                         pins = "gpio54", "gpio55", "gpio56", "gpio57";
 119                         drive-strength = <12>;
 120                         bias-disable;
 121                 };
 122                 pin_cs {
 123                         function = "gpio";
 124                         pins = "gpio54";
 125                         drive-strength = <2>;
 126                         bias-disable;
 127                         output-high;
 128                 };
 129         };
 130 };
 131
 132 &blsp_dma {
 133         status = "okay";
 134 };
 135
 136 &blsp1_spi1 {
 137         pinctrl-0 = <&spi_0_pins>;
 138         pinctrl-names = "default";
 139         status = "okay";
 140         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 141
 142         m25p80@0 {
 143                 compatible = "jedec,spi-nor";
 144                 reg = <0>;
 145                 spi-max-frequency = <24000000>;
 146                 partitions {
 147                         compatible = "fixed-partitions";
 148                         #address-cells = <1>;
 149                         #size-cells = <1>;
 150
 151                         partition@0 {
 152                                 label = "0:SBL1";
 153                                 reg = <0x00000000 0x00040000>;
 154                                 read-only;
 155                         };
 156                         partition@40000 {
 157                                 label = "0:MIBIB";
 158                                 reg = <0x00040000 0x00020000>;
 159                                 read-only;
 160                         };
 161                         partition@60000 {
 162                                 label = "0:QSEE";
 163                                 reg = <0x00060000 0x00060000>;
 164                                 read-only;
 165                         };
 166                         partition@c0000 {
 167                                 label = "0:CDT";
 168                                 reg = <0x000c0000 0x00010000>;
 169                                 read-only;
 170                         };
 171                         partition@d0000 {
 172                                 label = "0:DDRPARAMS";
 173                                 reg = <0x000d0000 0x00010000>;
 174                                 read-only;
 175                         };
 176                         partition@e0000 {
 177                                 label = "0:APPSBLENV";
 178                                 reg = <0x000e0000 0x00010000>;
 179                                 read-only;
 180                         };
 181                         partition@f0000 {
 182                                 label = "0:APPSBL";
 183                                 reg = <0x000f0000 0x00080000>;
 184                                 read-only;
 185                         };
 186                         partition@170000 {
 187                                 label = "0:ART";
 188                                 reg = <0x00170000 0x00010000>;
 189                                 read-only;
 190                         };
 191                         partition@180000 {
 192                                 label = "userconfig";
 193                                 reg = <0x00180000 0x00080000>;
 194                                 read-only;
 195                         };
 196                         partition@200000 {
 197                                 compatible = "denx,fit";
 198                                 label = "firmware";
 199                                 reg = <0x200000 0x1e00000>;
 200                         };
 201                 };
 202         };
 203 };
 204
 205 &blsp1_uart1 {
 206         pinctrl-0 = <&serial_pins>;
 207         pinctrl-names = "default";
 208         status = "okay";
 209 };
 210
 211 &cryptobam {
 212         status = "okay";
 213 };
 214
 215 &gmac0 {
 216         vlan_tag = <1 0x10>;
 217 };
 218
 219 &gmac1 {
 220         vlan_tag = <2 0x20>;
 221 };
 222
 223 &usb2_hs_phy {
 224         status = "okay";
 225 };
 226
 227 &wifi0 {
 228         status = "okay";
 229         qcom,ath10k-calibration-variant = "EnGenius-EMR3500";
 230 };
 231
 232 &wifi1 {
 233         status = "okay";
 234         qcom,ath10k-calibration-variant = "EnGenius-EMR3500";
 235 };