target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/input/linux-event-codes.h>
   7 #include <dt-bindings/soc/qcom,tcsr.h>
   8
   9 / {
  10         model = "ZyXEL NBG6617";
  11         compatible = "zyxel,nbg6617";
  12
  13         chosen {
  14                 /*
  15                  * the vendor u-boot adds root and mtdparts cmdline parameters
  16                  * which we don't want... but we have to overwrite them or else
  17                  * the kernel will take them at face value.
  18                  */
  19                 bootargs-append = " mtdparts= root=31:13";
  20         };
  21
  22         aliases {
  23                 led-boot = &power;
  24                 led-failsafe = &power;
  25                 led-running = &power;
  26                 led-upgrade = &power;
  27         };
  28
  29         soc {
  30                 rng@22000 {
  31                         status = "okay";
  32                 };
  33
  34                 mdio@90000 {
  35                         status = "okay";
  36                 };
  37
  38                 ess-psgmii@98000 {
  39                         status = "okay";
  40                 };
  41
  42                 tcsr@1949000 {
  43                         compatible = "qcom,tcsr";
  44                         reg = <0x1949000 0x100>;
  45                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  46                 };
  47
  48                 tcsr@194b000 {
  49                         compatible = "qcom,tcsr";
  50                         reg = <0x194b000 0x100>;
  51                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  52                 };
  53
  54                 ess_tcsr@1953000 {
  55                         compatible = "qcom,tcsr";
  56                         reg = <0x1953000 0x1000>;
  57                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  58                 };
  59
  60                 tcsr@1957000 {
  61                         compatible = "qcom,tcsr";
  62                         reg = <0x1957000 0x100>;
  63                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  64                 };
  65
  66                 usb2@60f8800 {
  67                         status = "okay";
  68
  69                         dwc3@6000000 {
  70                                 #address-cells = <1>;
  71                                 #size-cells = <0>;
  72
  73                                 usb2_port1: port@1 {
  74                                         reg = <1>;
  75                                         #trigger-source-cells = <0>;
  76                                 };
  77                         };
  78                 };
  79
  80                 usb3@8af8800 {
  81                         status = "okay";
  82
  83                         dwc3@8a00000 {
  84                                 #address-cells = <1>;
  85                                 #size-cells = <0>;
  86
  87                                 usb3_port1: port@1 {
  88                                         reg = <1>;
  89                                         #trigger-source-cells = <0>;
  90                                 };
  91
  92                                 usb3_port2: port@2 {
  93                                         reg = <2>;
  94                                         #trigger-source-cells = <0>;
  95                                 };
  96                         };
  97                 };
  98
  99                 crypto@8e3a000 {
 100                         status = "okay";
 101                 };
 102
 103                 watchdog@b017000 {
 104                         status = "okay";
 105                 };
 106
 107                 ess-switch@c000000 {
 108                         status = "okay";
 109                 };
 110
 111                 edma@c080000 {
 112                         status = "okay";
 113                 };
 114         };
 115
 116         keys {
 117                 compatible = "gpio-keys";
 118
 119                 wlan {
 120                         label = "wlan";
 121                         gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
 122                         linux,code = <KEY_RFKILL>;
 123                         linux,input-type = <EV_SW>;
 124                 };
 125
 126                 wps {
 127                         label = "wps";
 128                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 129                         linux,code = <KEY_WPS_BUTTON>;
 130                 };
 131
 132                 reset {
 133                         label = "reset";
 134                         gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
 135                         linux,code = <KEY_RESTART>;
 136                 };
 137         };
 138
 139         leds {
 140                 compatible = "gpio-leds";
 141                 pinctrl-0 = <&led_pins>;
 142                 pinctrl-names = "default";
 143
 144                 power: power {
 145                         label = "green:power";
 146                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 147                 };
 148
 149                 usb {
 150                         label = "green:usb";
 151                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 152                         trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>;
 153                         linux,default-trigger = "usbport";
 154                 };
 155
 156                 wlan2g {
 157                         label = "green:wlan2g";
 158                         gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
 159                 };
 160
 161                 wlan5g {
 162                         label = "green:wlan5g";
 163                         gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 164                 };
 165
 166                 wps {
 167                         label = "green:wps";
 168                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 169                 };
 170         };
 171 };
 172
 173 &tlmm {
 174         serial_pins: serial_pinmux {
 175                 mux {
 176                         pins = "gpio60", "gpio61";
 177                         function = "blsp_uart0";
 178                         bias-disable;
 179                 };
 180         };
 181         spi_0_pins: spi_0_pinmux {
 182                 mux {
 183                         function = "blsp_spi0";
 184                         pins = "gpio55", "gpio56", "gpio57";
 185                         drive-strength = <12>;
 186                         bias-disable;
 187                 };
 188
 189                 mux_cs {
 190                         function = "gpio";
 191                         pins = "gpio54";
 192                         drive-strength = <2>;
 193                         bias-disable;
 194                         output-low;
 195                 };
 196         };
 197         led_pins: led_pinmux {
 198                 mux {
 199                         pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58";
 200                         drive-strength = <0x8>;
 201                         bias-disable;
 202                         output-low;
 203                 };
 204         };
 205 };
 206
 207 &blsp1_spi1 { /* BLSP1 QUP1 */
 208         pinctrl-0 = <&spi_0_pins>;
 209         pinctrl-names = "default";
 210         status = "okay";
 211         cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 212
 213         flash@0 {
 214                 compatible = "jedec,spi-nor";
 215                 reg = <0>;
 216                 spi-max-frequency = <50000000>;
 217                 status = "okay";
 218                 m25p,fast-read;
 219
 220                 partitions {
 221                         compatible = "fixed-partitions";
 222                         #address-cells = <1>;
 223                         #size-cells = <1>;
 224
 225                         partition0@0 {
 226                                 label = "SBL1";
 227                                 reg = <0x00000000 0x00040000>;
 228                                 read-only;
 229                         };
 230                         partition1@40000 {
 231                                 label = "MIBIB";
 232                                 reg = <0x00040000 0x00020000>;
 233                                 read-only;
 234                         };
 235                         partition2@60000 {
 236                                 label = "QSEE";
 237                                 reg = <0x00060000 0x00060000>;
 238                                 read-only;
 239                         };
 240                         partition3@c0000 {
 241                                 label = "CDT";
 242                                 reg = <0x000c0000 0x00010000>;
 243                                 read-only;
 244                         };
 245                         partition4@d0000 {
 246                                 label = "DDRPARAMS";
 247                                 reg = <0x000d0000 0x00010000>;
 248                                 read-only;
 249                         };
 250                         partition5@e0000 {
 251                                 label = "APPSBL"; /* u-boot */
 252                                 reg = <0x000e0000 0x00080000>;
 253                                 /* U-Boot Standalone App "zloader" is located at 0x64000 */
 254                                 read-only;
 255                         };
 256                         partition6@160000 {
 257                                 label = "APPSBLENV"; /* u-boot env */
 258                                 reg = <0x00160000 0x00010000>;
 259                         };
 260                         partition7@170000 {
 261                                 /* make a backup of this partition! */
 262                                 label = "ART";
 263                                 reg = <0x00170000 0x00010000>;
 264                                 read-only;
 265                         };
 266                         partition8@180000 {
 267                                 label = "kernel";
 268                                 reg = <0x00180000 0x00400000>;
 269                         };
 270                         partition9@580000 {
 271                                 label = "dualflag";
 272                                 reg = <0x00580000 0x00010000>;
 273                                 read-only;
 274                         };
 275                         partition10@590000 {
 276                                 label = "header";
 277                                 reg = <0x00590000 0x00010000>;
 278                         };
 279                         partition11@5a0000 {
 280                                 label = "romd";
 281                                 reg = <0x005a0000 0x00100000>;
 282                                 read-only;
 283                         };
 284                         partition12@6a0000 {
 285                                 label = "not_root_data";
 286                                 /*
 287                                  * for some strange reason, someone at ZyXEL
 288                                  * had the "great" idea to put the rootfs_data
 289                                  * in front of rootfs... Don't do that!
 290                                  * As a result this one, full MebiByte remains
 291                                  * unused.
 292                                  */
 293                                 reg = <0x006a0000 0x00100000>;
 294                         };
 295                         partition13@7a0000 {
 296                                 label = "rootfs";
 297                                 reg = <0x007a0000 0x01860000>;
 298                         };
 299                 };
 300         };
 301 };
 302
 303 &blsp1_uart1 {
 304         pinctrl-0 = <&serial_pins>;
 305         pinctrl-names = "default";
 306         status = "okay";
 307 };
 308
 309 &cryptobam {
 310         status = "okay";
 311 };
 312
 313 &blsp_dma {
 314         status = "okay";
 315 };
 316
 317 &wifi0 {
 318         status = "okay";
 319         qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
 320 };
 321
 322 &wifi1 {
 323         status = "okay";
 324         qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
 325 };
 326
 327 &usb3_ss_phy {
 328         status = "okay";
 329 };
 330
 331 &usb3_hs_phy {
 332         status = "okay";
 333 };
 334
 335 &usb2_hs_phy {
 336         status = "okay";
 337 };