target/linux/ipq40xx/image/Makefile

   1 include $(TOPDIR)/rules.mk
   2 include $(INCLUDE_DIR)/image.mk
   3
   4 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   5 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   6 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   7
   8 define Device/Default
   9         PROFILES := Default
  10         KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
  11         KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
  12         KERNEL_PREFIX := $$(IMAGE_PREFIX)
  13         KERNEL_LOADADDR := 0x80208000
  14         DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
  15         SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
  16         IMAGES := sysupgrade.bin
  17         IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
  18         IMAGE/sysupgrade.bin/squashfs :=
  19 endef
  20
  21 define Device/FitImage
  22         KERNEL_SUFFIX := -fit-uImage.itb
  23         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  24         KERNEL_NAME := Image
  25 endef
  26
  27 define Device/FitImageLzma
  28         KERNEL_SUFFIX := -fit-uImage.itb
  29         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  30         KERNEL_NAME := Image
  31 endef
  32
  33 define Device/FitzImage
  34         KERNEL_SUFFIX := -fit-zImage.itb
  35         KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  36         KERNEL_NAME := zImage
  37 endef
  38
  39 define Device/UbiFit
  40         KERNEL_IN_UBI := 1
  41         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  42         IMAGE/nand-factory.ubi := append-ubi
  43         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  44 endef
  45
  46 define Device/DniImage
  47         $(call Device/FitzImage)
  48         NETGEAR_BOARD_ID :=
  49         NETGEAR_HW_ID :=
  50         IMAGES += factory.img
  51         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  52         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  53                 append-rootfs | pad-rootfs | append-metadata | check-size
  54 endef
  55
  56 define Build/append-rootfshdr
  57         mkimage -A $(LINUX_KARCH) \
  58                 -O linux -T filesystem \
  59                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  60                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  61         dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
  62 endef
  63
  64 define Build/mkmylofw_32m
  65         $(eval device_id=$(word 1,$(1)))
  66         $(eval revision=$(word 2,$(1)))
  67
  68         let \
  69                 size="$$(stat -c%s $@)" \
  70                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  71                 pad="(pad - (size % pad)) % pad" \
  72                 newsize='size + pad'; \
  73                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  74                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  75                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  76                 $@.new
  77         @mv $@.new $@
  78 endef
  79
  80 define Build/qsdk-ipq-factory-nand-askey
  81         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  82                 askey_kernel $(IMAGE_KERNEL) \
  83                 askey_fs $(IMAGE_ROOTFS) \
  84                 ubifs $@
  85         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  86         @mv $@.new $@
  87 endef
  88
  89 define Build/SenaoFW
  90         -$(STAGING_DIR_HOST)/bin/mksenaofw \
  91                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
  92                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
  93                 -e $@ \
  94                 -o $@.new
  95         @cp $@.new $@
  96 endef
  97
  98 define Build/wrgg-image
  99         mkwrggimg -i $@ \
 100         -o $@.new \
 101         -d "$(WRGG_DEVNAME)" \
 102         -s "$(WRGG_SIGNATURE)" \
 103         -v "" -m "" -B ""
 104         mv $@.new $@
 105 endef
 106
 107 define Device/8dev_habanero-dvk
 108         $(call Device/FitImageLzma)
 109         DEVICE_VENDOR := 8devices
 110         DEVICE_MODEL := Habanero DVK
 111         IMAGE_SIZE := 30976k
 112         SOC := qcom-ipq4019
 113         DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
 114         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
 115 endef
 116 TARGET_DEVICES += 8dev_habanero-dvk
 117
 118 define Device/8dev_jalapeno-common
 119         $(call Device/FitImage)
 120         $(call Device/UbiFit)
 121         BLOCKSIZE := 128k
 122         PAGESIZE := 2048
 123         SOC := qcom-ipq4018
 124 endef
 125
 126 define Device/8dev_jalapeno
 127         $(call Device/8dev_jalapeno-common)
 128         DEVICE_VENDOR := 8devices
 129         DEVICE_MODEL := Jalapeno
 130 endef
 131 TARGET_DEVICES += 8dev_jalapeno
 132
 133 define Device/alfa-network_ap120c-ac
 134         $(call Device/FitImage)
 135         $(call Device/UbiFit)
 136         DEVICE_VENDOR := ALFA Network
 137         DEVICE_MODEL := AP120C-AC
 138         SOC := qcom-ipq4018
 139         DEVICE_PACKAGES := kmod-usb-acm \
 140                 kmod-tpm-i2c-atmel uboot-envtools
 141         BLOCKSIZE := 128k
 142         PAGESIZE := 2048
 143         IMAGE_SIZE := 65536k
 144         IMAGES := nand-factory.bin nand-sysupgrade.bin
 145         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 146 endef
 147 TARGET_DEVICES += alfa-network_ap120c-ac
 148
 149 define Device/aruba_glenmorangie
 150         $(call Device/FitImageLzma)
 151         DEVICE_VENDOR := Aruba
 152         SOC := qcom-ipq4029
 153         DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
 154 endef
 155
 156 define Device/aruba_ap-303
 157         $(call Device/aruba_glenmorangie)
 158         DEVICE_MODEL := AP-303
 159 endef
 160 TARGET_DEVICES += aruba_ap-303
 161
 162 define Device/aruba_ap-303h
 163         $(call Device/aruba_glenmorangie)
 164         DEVICE_MODEL := AP-303H
 165 endef
 166 TARGET_DEVICES += aruba_ap-303h
 167
 168 define Device/aruba_ap-365
 169         $(call Device/aruba_glenmorangie)
 170         DEVICE_MODEL := AP-365
 171         DEVICE_PACKAGES += kmod-hwmon-ad7418
 172 endef
 173 TARGET_DEVICES += aruba_ap-365
 174
 175 define Device/asus_map-ac2200
 176         $(call Device/FitImageLzma)
 177         DEVICE_VENDOR := ASUS
 178         DEVICE_MODEL := Lyra (MAP-AC2200)
 179         SOC := qcom-ipq4019
 180         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 181 endef
 182 TARGET_DEVICES += asus_map-ac2200
 183
 184 define Device/asus_rt-ac58u
 185         $(call Device/FitImageLzma)
 186         DEVICE_VENDOR := ASUS
 187         DEVICE_MODEL := RT-AC58U
 188         SOC := qcom-ipq4018
 189         BLOCKSIZE := 128k
 190         PAGESIZE := 2048
 191         DTB_SIZE := 65536
 192         IMAGE_SIZE := 20439364
 193         FILESYSTEMS := squashfs
 194 #       Someone - in their infinite wisdom - decided to put the firmware
 195 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 196 #       Since u-boot works with strings we either need another fixup step
 197 #       to add a version... or we are very careful not to add '\0' into that
 198 #       string and call it a day.... Yeah, we do the latter!
 199         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 200         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 201                 kmod-usb-ledtrig-usbport
 202 endef
 203 TARGET_DEVICES += asus_rt-ac58u
 204
 205 define Device/avm_fritzbox-4040
 206         $(call Device/FitImageLzma)
 207         DEVICE_VENDOR := AVM
 208         DEVICE_MODEL := FRITZ!Box 4040
 209         SOC := qcom-ipq4018
 210         BOARD_NAME := fritz4040
 211         IMAGE_SIZE := 29056k
 212         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 213         UBOOT_PARTITION_SIZE := 524288
 214         IMAGES += eva.bin
 215         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 216         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
 217         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 218 endef
 219 TARGET_DEVICES += avm_fritzbox-4040
 220
 221 define Device/avm_fritzbox-7530
 222         $(call Device/FitImageLzma)
 223         DEVICE_VENDOR := AVM
 224         DEVICE_MODEL := FRITZ!Box 7530
 225         SOC := qcom-ipq4019
 226         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 227 endef
 228 TARGET_DEVICES += avm_fritzbox-7530
 229
 230 define Device/avm_fritzrepeater-1200
 231         $(call Device/FitImageLzma)
 232         DEVICE_VENDOR := AVM
 233         DEVICE_MODEL := FRITZ!Repeater 1200
 234         SOC := qcom-ipq4019
 235         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
 236 endef
 237 TARGET_DEVICES += avm_fritzrepeater-1200
 238
 239 define Device/avm_fritzrepeater-3000
 240         $(call Device/FitImageLzma)
 241         DEVICE_VENDOR := AVM
 242         DEVICE_MODEL := FRITZ!Repeater 3000
 243         SOC := qcom-ipq4019
 244         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 245 endef
 246 TARGET_DEVICES += avm_fritzrepeater-3000
 247
 248 define Device/buffalo_wtr-m2133hp
 249         $(call Device/FitImage)
 250         $(call Device/UbiFit)
 251         DEVICE_VENDOR := Buffalo
 252         DEVICE_MODEL := WTR-M2133HP
 253         SOC := qcom-ipq4019
 254         DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
 255         BLOCKSIZE := 128k
 256         PAGESIZE := 2048
 257 endef
 258 TARGET_DEVICES += buffalo_wtr-m2133hp
 259
 260 define Device/cellc_rtl30vw
 261         KERNEL_SUFFIX := -fit-uImage.itb
 262         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
 263         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 264         KERNEL_NAME := Image
 265         KERNEL_IN_UBI :=
 266         IMAGES := nand-factory.bin nand-sysupgrade.bin
 267         IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
 268         IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
 269         DEVICE_VENDOR := Cell C
 270         DEVICE_MODEL := RTL30VW
 271         SOC := qcom-ipq4019
 272         DEVICE_DTS_CONFIG := config@5
 273         KERNEL_INSTALL := 1
 274         KERNEL_SIZE := 4096k
 275         IMAGE_SIZE := 57344k
 276         BLOCKSIZE := 128k
 277         PAGESIZE := 2048
 278         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
 279 endef
 280 TARGET_DEVICES += cellc_rtl30vw
 281
 282 define Device/cilab_meshpoint-one
 283         $(call Device/8dev_jalapeno-common)
 284         DEVICE_VENDOR := Crisis Innovation Lab
 285         DEVICE_MODEL := MeshPoint.One
 286         DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 287 endef
 288 TARGET_DEVICES += cilab_meshpoint-one
 289
 290 define Device/compex_wpj419
 291         $(call Device/FitImage)
 292         $(call Device/UbiFit)
 293         DEVICE_VENDOR := Compex
 294         DEVICE_MODEL := WPJ419
 295         SOC := qcom-ipq4019
 296         DEVICE_DTS_CONFIG := config@12
 297         KERNEL_INSTALL := 1
 298         BLOCKSIZE := 128k
 299         PAGESIZE := 2048
 300         FILESYSTEMS := squashfs
 301 endef
 302 TARGET_DEVICES += compex_wpj419
 303
 304 define Device/compex_wpj428
 305         $(call Device/FitImage)
 306         DEVICE_VENDOR := Compex
 307         DEVICE_MODEL := WPJ428
 308         SOC := qcom-ipq4028
 309         DEVICE_DTS_CONFIG := config@4
 310         BLOCKSIZE := 64k
 311         IMAGE_SIZE := 31232k
 312         KERNEL_SIZE := 4096k
 313         IMAGES += cpximg-6a04.bin
 314         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 315         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 316         DEVICE_PACKAGES := kmod-gpio-beeper
 317 endef
 318 TARGET_DEVICES += compex_wpj428
 319
 320 define Device/dlink_dap-2610
 321         $(call Device/FitImageLzma)
 322         DEVICE_VENDOR := D-Link
 323         DEVICE_MODEL := DAP-2610
 324         SOC := qcom-ipq4018
 325         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 326         BLOCKSIZE := 64k
 327         WRGG_DEVNAME := /dev/mtdblock/8
 328         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 329         IMAGE_SIZE := 14080k
 330         IMAGES += factory.bin
 331         # Bootloader expects a special 160 byte header which is added by
 332         # wrgg-image.
 333         # Factory image size must be larger than 6MB, and size in wrgg header must
 334         # match actual factory image size to be flashable from D-Link http server.
 335         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 336         # cannot be part of the wrgg image. This is solved in the factory image by
 337         # having the rootfs at the end of the image (without pad-rootfs). And in
 338         # the sysupgrade image only the kernel is included in the wrgg checksum,
 339         # but this is not flashable from the D-link http server.
 340         # append-rootfs must start on an erase block boundary.
 341         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 342         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 343         DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
 344 endef
 345 TARGET_DEVICES += dlink_dap-2610
 346
 347 define Device/edgecore_ecw5211
 348         $(call Device/FitImage)
 349         $(call Device/UbiFit)
 350         DEVICE_TITLE := Edgecore ECW5211
 351         BLOCKSIZE := 128k
 352         PAGESIZE := 2048
 353         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 354         DEVICE_DTS := qcom-ipq4018-ecw5211
 355         DEVICE_PACKAGES := ipq-wifi-edgecore_ecw5211 kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools
 356 endef
 357 TARGET_DEVICES += edgecore_ecw5211
 358
 359 define Device/edgecore_oap100
 360         $(call Device/FitImage)
 361         $(call Device/UbiFit)
 362         DEVICE_TITLE := Edgecore OAP100
 363         BLOCKSIZE := 128k
 364         PAGESIZE := 2048
 365         IMAGES := nand-sysupgrade.bin
 366         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 367         DEVICE_DTS := qcom-ipq4019-oap100
 368         DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 369 endef
 370 TARGET_DEVICES += edgecore_oap100
 371
 372 define Device/engenius_eap1300
 373         $(call Device/FitImage)
 374         DEVICE_VENDOR := EnGenius
 375         DEVICE_MODEL := EAP1300
 376         DEVICE_DTS_CONFIG := config@4
 377         BOARD_NAME := eap1300
 378         SOC := qcom-ipq4018
 379         KERNEL_SIZE := 5120k
 380         IMAGE_SIZE := 25344k
 381         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 382 endef
 383 TARGET_DEVICES += engenius_eap1300
 384
 385 define Device/engenius_eap2200
 386         $(call Device/FitImage)
 387         $(call Device/UbiFit)
 388         DEVICE_VENDOR := EnGenius
 389         DEVICE_MODEL := EAP2200
 390         SOC := qcom-ipq4019
 391         BLOCKSIZE := 128k
 392         PAGESIZE := 2048
 393         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 394 endef
 395 TARGET_DEVICES += engenius_eap2200
 396
 397 define Device/engenius_emd1
 398         $(call Device/FitImage)
 399         DEVICE_VENDOR := EnGenius
 400         DEVICE_MODEL := EMD1
 401         DEVICE_DTS_CONFIG := config@4
 402         SOC := qcom-ipq4018
 403         IMAGE_SIZE := 30720k
 404         IMAGES += factory.bin
 405         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 406         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 407 endef
 408 TARGET_DEVICES += engenius_emd1
 409
 410 define Device/engenius_emr3500
 411         $(call Device/FitImage)
 412         DEVICE_VENDOR := EnGenius
 413         DEVICE_MODEL := EMR3500
 414         DEVICE_DTS_CONFIG := config@4
 415         SOC := qcom-ipq4018
 416         KERNEL_SIZE := 4096k
 417         IMAGE_SIZE := 30720k
 418         IMAGES += factory.bin
 419         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 420         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 421 endef
 422 TARGET_DEVICES += engenius_emr3500
 423
 424 define Device/engenius_ens620ext
 425         $(call Device/FitImage)
 426         DEVICE_VENDOR := EnGenius
 427         DEVICE_MODEL := ENS620EXT
 428         SOC := qcom-ipq4018
 429         DEVICE_DTS_CONFIG := config@4
 430         BLOCKSIZE := 64k
 431         PAGESIZE := 256
 432         BOARD_NAME := ENS620EXT
 433         VENDOR_ID := 0x0101
 434         PRODUCT_ID := 0x79
 435         PRODUCT_ID_NEW := 0xA4
 436         DATECODE := 190507
 437         FW_VER := 3.1.2
 438         FW_VER_NEW := 3.5.6
 439         CW_VER := 1.8.99
 440         IMAGE_SIZE := 21312k
 441         KERNEL_SIZE := 5120k
 442         FILESYSTEMS := squashfs
 443         IMAGES += factory_30.bin factory_35.bin
 444         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 445         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 446         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 447 endef
 448 TARGET_DEVICES += engenius_ens620ext
 449
 450 define Device/ezviz_cs-w3-wd1200g-eup
 451         $(call Device/FitImage)
 452         DEVICE_VENDOR := EZVIZ
 453         DEVICE_MODEL := CS-W3-WD1200G
 454         DEVICE_VARIANT := EUP
 455         DEVICE_DTS_CONFIG := config@4
 456         IMAGE_SIZE := 14848k
 457         SOC := qcom-ipq4018
 458         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 459                 append-metadata
 460         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 461                 ipq-wifi-ezviz_cs-w3-wd1200g-eup
 462 endef
 463 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 464
 465 define Device/glinet_gl-b1300
 466         $(call Device/FitImage)
 467         DEVICE_VENDOR := GL.iNet
 468         DEVICE_MODEL := GL-B1300
 469         BOARD_NAME := gl-b1300
 470         SOC := qcom-ipq4029
 471         KERNEL_SIZE := 4096k
 472         IMAGE_SIZE := 26624k
 473         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 474 endef
 475 TARGET_DEVICES += glinet_gl-b1300
 476
 477 define Device/glinet_gl-s1300
 478         $(call Device/FitImage)
 479         DEVICE_VENDOR := GL.iNet
 480         DEVICE_MODEL := GL-S1300
 481         SOC := qcom-ipq4029
 482         KERNEL_SIZE := 4096k
 483         IMAGE_SIZE := 26624k
 484         IMAGES := sysupgrade.bin
 485         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 486         DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
 487 endef
 488 TARGET_DEVICES += glinet_gl-s1300
 489
 490 define Device/linksys_ea6350v3
 491         # The Linksys EA6350v3 has a uboot bootloader that does not
 492         # support either booting lzma kernel images nor booting UBI
 493         # partitions. This uboot, however, supports raw kernel images and
 494         # gzipped images.
 495         #
 496         # As for the time of writing this, the device will boot the kernel
 497         # from a fixed address with a fixed length of 3MiB. Also, the
 498         # device has a hard-coded kernel command line that requieres the
 499         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 500         # Oh... and the kernel partition overlaps with the rootfs
 501         # partition (the same for alt_kernel and alt_rootfs).
 502         #
 503         # If you are planing re-partitioning the device, you may want to
 504         # keep those details in mind:
 505         # 1. The kernel adresses you should honor are 0x00000000 and
 506         #    0x02800000 respectively.
 507         # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
 508         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 509         # 4. The kernel command line from uboot is harcoded to boot with
 510         #    rootfs either in mtd11 or mtd13.
 511         $(call Device/FitzImage)
 512         DEVICE_VENDOR := Linksys
 513         DEVICE_MODEL := EA6350
 514         DEVICE_VARIANT := v3
 515         SOC := qcom-ipq4018
 516         BLOCKSIZE := 128k
 517         PAGESIZE := 2048
 518         KERNEL_SIZE := 3072k
 519         IMAGE_SIZE := 37888k
 520         UBINIZE_OPTS := -E 5
 521         IMAGES += factory.bin
 522         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 523         DEVICE_PACKAGES := uboot-envtools
 524 endef
 525 TARGET_DEVICES += linksys_ea6350v3
 526
 527 define Device/linksys_ea8300
 528         $(call Device/FitzImage)
 529         DEVICE_VENDOR := Linksys
 530         DEVICE_MODEL := EA8300
 531         SOC := qcom-ipq4019
 532         KERNEL_SIZE := 3072k
 533         IMAGE_SIZE := 87040k
 534         BLOCKSIZE := 128k
 535         PAGESIZE := 2048
 536         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 537         IMAGES += factory.bin
 538         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 539         DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 540 endef
 541 TARGET_DEVICES += linksys_ea8300
 542
 543 define Device/meraki_mr33
 544         $(call Device/FitImage)
 545         DEVICE_VENDOR := Cisco Meraki
 546         DEVICE_MODEL := MR33
 547         SOC := qcom-ipq4029
 548         BLOCKSIZE := 128k
 549         PAGESIZE := 2048
 550         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 551 endef
 552 TARGET_DEVICES += meraki_mr33
 553
 554 define Device/mobipromo_cm520-79f
 555         $(call Device/FitzImage)
 556         $(call Device/UbiFit)
 557         DEVICE_VENDOR := MobiPromo
 558         DEVICE_MODEL := CM520-79F
 559         SOC := qcom-ipq4019
 560         BLOCKSIZE := 128k
 561         PAGESIZE := 2048
 562         DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
 563 endef
 564 TARGET_DEVICES += mobipromo_cm520-79f
 565
 566 define Device/netgear_ex61x0v2
 567         $(call Device/DniImage)
 568         DEVICE_DTS_CONFIG := config@4
 569         NETGEAR_BOARD_ID := EX6150v2series
 570         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 571         IMAGE_SIZE := 14400k
 572         SOC := qcom-ipq4018
 573 endef
 574
 575 define Device/netgear_ex6100v2
 576         $(call Device/netgear_ex61x0v2)
 577         DEVICE_VENDOR := Netgear
 578         DEVICE_MODEL := EX6100
 579         DEVICE_VARIANT := v2
 580 endef
 581 TARGET_DEVICES += netgear_ex6100v2
 582
 583 define Device/netgear_ex6150v2
 584         $(call Device/netgear_ex61x0v2)
 585         DEVICE_VENDOR := Netgear
 586         DEVICE_MODEL := EX6150
 587         DEVICE_VARIANT := v2
 588 endef
 589 TARGET_DEVICES += netgear_ex6150v2
 590
 591 define Device/openmesh_a42
 592         $(call Device/FitImageLzma)
 593         DEVICE_VENDOR := OpenMesh
 594         DEVICE_MODEL := A42
 595         SOC := qcom-ipq4018
 596         DEVICE_DTS_CONFIG := config@om.a42
 597         BLOCKSIZE := 64k
 598         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 599         IMAGE_SIZE := 15616k
 600         IMAGES += factory.bin
 601         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 602         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 603         DEVICE_PACKAGES := uboot-envtools
 604 endef
 605 TARGET_DEVICES += openmesh_a42
 606
 607 define Device/openmesh_a62
 608         $(call Device/FitImageLzma)
 609         DEVICE_VENDOR := OpenMesh
 610         DEVICE_MODEL := A62
 611         SOC := qcom-ipq4019
 612         DEVICE_DTS_CONFIG := config@om.a62
 613         BLOCKSIZE := 64k
 614         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 615         IMAGE_SIZE := 15552k
 616         IMAGES += factory.bin
 617         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 618         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 619         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
 620 endef
 621
 622 TARGET_DEVICES += openmesh_a62
 623
 624 define Device/qcom_ap-dk01.1-c1
 625         DEVICE_VENDOR := Qualcomm Atheros
 626         DEVICE_MODEL := AP-DK01.1
 627         DEVICE_VARIANT := C1
 628         BOARD_NAME := ap-dk01.1-c1
 629         SOC := qcom-ipq4019
 630         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 631         KERNEL_INSTALL := 1
 632         KERNEL_SIZE := 4096k
 633         IMAGE_SIZE := 26624k
 634         $(call Device/FitImage)
 635         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 636 endef
 637 TARGET_DEVICES += qcom_ap-dk01.1-c1
 638
 639 define Device/qcom_ap-dk04.1-c1
 640         $(call Device/FitImage)
 641         $(call Device/UbiFit)
 642         DEVICE_VENDOR := Qualcomm Atheros
 643         DEVICE_MODEL := AP-DK04.1
 644         DEVICE_VARIANT := C1
 645         SOC := qcom-ipq4019
 646         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 647         KERNEL_INSTALL := 1
 648         KERNEL_SIZE := 4048k
 649         BLOCKSIZE := 128k
 650         PAGESIZE := 2048
 651         BOARD_NAME := ap-dk04.1-c1
 652 endef
 653 TARGET_DEVICES += qcom_ap-dk04.1-c1
 654
 655 define Device/qxwlan_e2600ac-c1
 656         $(call Device/FitImage)
 657         DEVICE_VENDOR := Qxwlan
 658         DEVICE_MODEL := E2600AC
 659         DEVICE_VARIANT := C1
 660         BOARD_NAME := e2600ac-c1
 661         SOC := qcom-ipq4019
 662         KERNEL_SIZE := 4096k
 663         IMAGE_SIZE := 31232k
 664         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 665         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 666 endef
 667 TARGET_DEVICES += qxwlan_e2600ac-c1
 668
 669 define Device/qxwlan_e2600ac-c2
 670         $(call Device/FitImage)
 671         $(call Device/UbiFit)
 672         DEVICE_VENDOR := Qxwlan
 673         DEVICE_MODEL := E2600AC
 674         DEVICE_VARIANT := C2
 675         SOC := qcom-ipq4019
 676         KERNEL_INSTALL := 1
 677         BLOCKSIZE := 128k
 678         PAGESIZE := 2048
 679         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 680 endef
 681 TARGET_DEVICES += qxwlan_e2600ac-c2
 682
 683 define Device/unielec_u4019-32m
 684         $(call Device/FitImage)
 685         DEVICE_VENDOR := Unielec
 686         DEVICE_MODEL := U4019
 687         DEVICE_VARIANT := 32M
 688         BOARD_NAME := u4019-32m
 689         SOC := qcom-ipq4019
 690         KERNEL_SIZE := 4096k
 691         IMAGE_SIZE := 31232k
 692         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 693 endef
 694 TARGET_DEVICES += unielec_u4019-32m
 695
 696 define Device/zyxel_nbg6617
 697         $(call Device/FitImageLzma)
 698         DEVICE_VENDOR := ZyXEL
 699         DEVICE_MODEL := NBG6617
 700         SOC := qcom-ipq4018
 701         KERNEL_SIZE := 4096k
 702         ROOTFS_SIZE := 24960k
 703         RAS_BOARD := NBG6617
 704         RAS_ROOTFS_SIZE := 19840k
 705         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
 706         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 707         IMAGES += factory.bin
 708 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
 709 #       at least as large as the one of the initial firmware image (not the current
 710 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
 711 #       this minimum-size. However, the larger image can be flashed both ways.
 712         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
 713         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
 714         DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
 715 endef
 716 TARGET_DEVICES += zyxel_nbg6617
 717
 718 define Device/zyxel_wre6606
 719         $(call Device/FitImage)
 720         DEVICE_VENDOR := ZyXEL
 721         DEVICE_MODEL := WRE6606
 722         DEVICE_DTS_CONFIG := config@4
 723         SOC := qcom-ipq4018
 724         IMAGE_SIZE := 13184k
 725         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
 726         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 727 endef
 728 TARGET_DEVICES += zyxel_wre6606
 729
 730 $(eval $(call BuildImage))