target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch

   1 From cab1f4720e82f2e17eaeed9a9ad9e4f07c742977 Mon Sep 17 00:00:00 2001
   2 From: Mathieu Olivari <mathieu@codeaurora.org>
   3 Date: Mon, 11 May 2015 12:29:18 -0700
   4 Subject: [PATCH 8/8] ARM: dts: qcom: add gmac nodes to ipq806x platforms
   5
   6 Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
   7 ---
   8  arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 31 ++++++++++++
   9  arch/arm/boot/dts/qcom-ipq8064-db149.dts | 43 ++++++++++++++++
  10  arch/arm/boot/dts/qcom-ipq8064.dtsi      | 86 ++++++++++++++++++++++++++++++++
  11  3 files changed, 160 insertions(+)
  12
  13 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
  14 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
  15 @@ -69,6 +69,16 @@
  16                                         bias-disable;
  17                                 };
  18                         };
  19 +
  20 +                       rgmii2_pins: rgmii2_pins {
  21 +                               mux {
  22 +                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
  23 +                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
  24 +                                       function = "rgmii2";
  25 +                                       drive-strength = <8>;
  26 +                                       bias-disable;
  27 +                               };
  28 +                       };
  29                 };
  30
  31                 gsbi@16300000 {
  32 @@ -182,5 +192,26 @@
  33                                 reg = <4>;
  34                         };
  35                 };
  36 +
  37 +               gmac1: ethernet@37200000 {
  38 +                       status = "ok";
  39 +                       phy-mode = "rgmii";
  40 +                       phy-handle = <&phy4>;
  41 +                       qcom,id = <1>;
  42 +
  43 +                       pinctrl-0 = <&rgmii2_pins>;
  44 +                       pinctrl-names = "default";
  45 +               };
  46 +
  47 +               gmac2: ethernet@37400000 {
  48 +                       status = "ok";
  49 +                       phy-mode = "sgmii";
  50 +                       qcom,id = <2>;
  51 +
  52 +                       fixed-link {
  53 +                               speed = <1000>;
  54 +                               full-duplex;
  55 +                       };
  56 +               };
  57         };
  58  };
  59 --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts
  60 +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
  61 @@ -72,6 +72,14 @@
  62                                         bias-disable;
  63                                 };
  64                         };
  65 +
  66 +                       rgmii0_pins: rgmii0_pins {
  67 +                               mux {
  68 +                                       pins = "gpio2", "gpio66";
  69 +                                       drive-strength = <8>;
  70 +                                       bias-disable;
  71 +                               };
  72 +                       };
  73                 };
  74
  75                 gsbi2: gsbi@12480000 {
  76 @@ -222,5 +230,40 @@
  77                                 reg = <7>;
  78                         };
  79                 };
  80 +
  81 +               gmac0: ethernet@37000000 {
  82 +                       status = "ok";
  83 +                       phy-mode = "rgmii";
  84 +                       qcom,id = <0>;
  85 +                       phy-handle = <&phy4>;
  86 +
  87 +                       pinctrl-0 = <&rgmii0_pins>;
  88 +                       pinctrl-names = "default";
  89 +               };
  90 +
  91 +               gmac1: ethernet@37200000 {
  92 +                       status = "ok";
  93 +                       phy-mode = "sgmii";
  94 +                       qcom,id = <1>;
  95 +
  96 +                       fixed-link {
  97 +                               speed = <1000>;
  98 +                               full-duplex;
  99 +                       };
 100 +               };
 101 +
 102 +               gmac2: ethernet@37400000 {
 103 +                       status = "ok";
 104 +                       phy-mode = "sgmii";
 105 +                       qcom,id = <2>;
 106 +                       phy-handle = <&phy6>;
 107 +               };
 108 +
 109 +               gmac3: ethernet@37600000 {
 110 +                       status = "ok";
 111 +                       phy-mode = "sgmii";
 112 +                       qcom,id = <3>;
 113 +                       phy-handle = <&phy7>;
 114 +               };
 115         };
 116  };
 117 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 118 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
 119 @@ -578,5 +578,91 @@
 120                         status = "disabled";
 121                 };
 122
 123 +               nss_common: syscon@03000000 {
 124 +                       compatible = "syscon";
 125 +                       reg = <0x03000000 0x0000FFFF>;
 126 +               };
 127 +
 128 +               qsgmii_csr: syscon@1bb00000 {
 129 +                       compatible = "syscon";
 130 +                       reg = <0x1bb00000 0x000001FF>;
 131 +               };
 132 +
 133 +               gmac0: ethernet@37000000 {
 134 +                       device_type = "network";
 135 +                       compatible = "qcom,ipq806x-gmac";
 136 +                       reg = <0x37000000 0x200000>;
 137 +                       interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
 138 +                       interrupt-names = "macirq";
 139 +
 140 +                       qcom,nss-common = <&nss_common>;
 141 +                       qcom,qsgmii-csr = <&qsgmii_csr>;
 142 +
 143 +                       clocks = <&gcc GMAC_CORE1_CLK>;
 144 +                       clock-names = "stmmaceth";
 145 +
 146 +                       resets = <&gcc GMAC_CORE1_RESET>;
 147 +                       reset-names = "stmmaceth";
 148 +
 149 +                       status = "disabled";
 150 +               };
 151 +
 152 +               gmac1: ethernet@37200000 {
 153 +                       device_type = "network";
 154 +                       compatible = "qcom,ipq806x-gmac";
 155 +                       reg = <0x37200000 0x200000>;
 156 +                       interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 157 +                       interrupt-names = "macirq";
 158 +
 159 +                       qcom,nss-common = <&nss_common>;
 160 +                       qcom,qsgmii-csr = <&qsgmii_csr>;
 161 +
 162 +                       clocks = <&gcc GMAC_CORE2_CLK>;
 163 +                       clock-names = "stmmaceth";
 164 +
 165 +                       resets = <&gcc GMAC_CORE2_RESET>;
 166 +                       reset-names = "stmmaceth";
 167 +
 168 +                       status = "disabled";
 169 +               };
 170 +
 171 +               gmac2: ethernet@37400000 {
 172 +                       device_type = "network";
 173 +                       compatible = "qcom,ipq806x-gmac";
 174 +                       reg = <0x37400000 0x200000>;
 175 +                       interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
 176 +                       interrupt-names = "macirq";
 177 +
 178 +                       qcom,nss-common = <&nss_common>;
 179 +                       qcom,qsgmii-csr = <&qsgmii_csr>;
 180 +
 181 +                       clocks = <&gcc GMAC_CORE3_CLK>;
 182 +                       clock-names = "stmmaceth";
 183 +
 184 +                       resets = <&gcc GMAC_CORE3_RESET>;
 185 +                       reset-names = "stmmaceth";
 186 +
 187 +                       status = "disabled";
 188 +               };
 189 +
 190 +               gmac3: ethernet@37600000 {
 191 +                       device_type = "network";
 192 +                       compatible = "qcom,ipq806x-gmac";
 193 +                       reg = <0x37600000 0x200000>;
 194 +                       interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
 195 +                       interrupt-names = "macirq";
 196 +
 197 +                       qcom,nss-common = <&nss_common>;
 198 +                       qcom,qsgmii-csr = <&qsgmii_csr>;
 199 +
 200 +                       clocks = <&gcc GMAC_CORE4_CLK>;
 201 +                       clock-names = "stmmaceth";
 202 +
 203 +                       resets = <&gcc GMAC_CORE4_RESET>;
 204 +                       reset-names = "stmmaceth";
 205 +
 206 +                       status = "disabled";
 207 +               };
 208 +
 209         };
 210  };