target/linux/lantiq/dts/BTHOMEHUBV5A.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "BTHOMEHUBV5A - BT Home Hub 5A";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  12         };
  13
  14         aliases {
  15                 led-boot = &power_green;
  16                 led-failsafe = &power_red;
  17                 led-running = &power_blue;
  18
  19                 led-internet = &broadband_blue;
  20                 led-wifi = &wireless_blue;
  21         };
  22
  23         memory@0 {
  24                 reg = <0x0 0x8000000>;
  25         };
  26
  27         fpi@10000000 {
  28                 localbus@0 {
  29                         nand-parts@0 {
  30                                 compatible = "gen_nand", "lantiq,nand-xway";
  31                                 lantiq,cs = <1>;
  32                                 bank-width = <2>;
  33                                 reg = <0x1 0x0 0x2000000>;
  34                                 #address-cells = <1>;
  35                                 #size-cells = <1>;
  36
  37                                 partitions {
  38                                         compatible = "fixed-partitions";
  39                                         #address-cells = <1>;
  40                                         #size-cells = <1>;
  41
  42                                         partition@0 {
  43                                                 label = "u-boot";
  44                                                 reg = <0x0 0x40000>;
  45                                                 read-only;
  46                                         };
  47                                         partition@40000 {
  48                                                 label = "uboot-env";
  49                                                 reg = <0x40000 0x40000>;
  50                                         };
  51                                         caldata: partition@80000 {
  52                                                 label = "caldata";
  53                                                 reg = <0x80000 0x20000>;
  54                                                 read-only;
  55                                         };
  56                                         partition@a0000 {
  57                                                 label = "kernel";
  58                                                 reg = <0xa0000 0x200000>;
  59                                         };
  60                                         partition@2a0000 {
  61                                                 label = "ubi";
  62                                                 reg = <0x2a0000 0x7d60000>;
  63                                         };
  64                                 };
  65                         };
  66                 };
  67
  68                 gpio: pinmux@E100B10 {
  69                         pinctrl-names = "default";
  70                         pinctrl-0 = <&state_default>;
  71
  72                         state_default: pinmux {
  73                                 mdio {
  74                                         lantiq,groups = "mdio";
  75                                         lantiq,function = "mdio";
  76                                 };
  77                                 pci_rst {
  78                                         lantiq,pins = "io21";
  79                                         lantiq,output = <1>;
  80                                         lantiq,open-drain;
  81                                 };
  82                                 pcie_rst {
  83                                         lantiq,pins = "io38";
  84                                         lantiq,pull = <0>;
  85                                         lantiq,output = <1>;
  86                                         lantiq,open-drain;
  87                                 };
  88                                 usb_vbus {
  89                                         lantiq,pins = "io33";
  90                                         lantiq,pull = <0>;
  91                                         lantiq,open-drain = <0>;
  92                                         lantiq,output = <1>;
  93                                 };
  94                                 nand_out {
  95                                         lantiq,groups = "nand cle", "nand ale";
  96                                         lantiq,function = "ebu";
  97                                         lantiq,output = <1>;
  98                                         lantiq,open-drain = <0>;
  99                                         lantiq,pull = <0>;
 100                                 };
 101                                 nand_cs1 {
 102                                         lantiq,groups = "nand cs1";
 103                                         lantiq,function = "ebu";
 104                                         lantiq,open-drain = <0>;
 105                                         lantiq,pull = <0>;
 106                                 };
 107                         };
 108                 };
 109
 110                 ifxhcd@E101000 {
 111                         status = "okay";
 112                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
 113                 };
 114         };
 115
 116         gphy-xrx200 {
 117                 compatible = "lantiq,phy-xrx200";
 118                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 119                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 120                 phys = [ 00 01 ];
 121         };
 122
 123         gpio-keys-polled {
 124                 compatible = "gpio-keys-polled";
 125                 #address-cells = <1>;
 126                 #size-cells = <0>;
 127                 poll-interval = <100>;
 128
 129                 reset {
 130                         label = "reset";
 131                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 132                         linux,code = <KEY_RESTART>;
 133                 };
 134
 135                 wps {
 136                         label = "wps";
 137                         gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
 138                         linux,code = <KEY_WPS_BUTTON>;
 139                 };
 140
 141                 restart {
 142                         label = "restart";
 143                         gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
 144                         linux,code = <KEY_POWER>;
 145                 };
 146         };
 147
 148         gpio-leds {
 149                 compatible = "gpio-leds";
 150
 151                 /* broadband-* is a single RGB led */
 152                 broadband-red {
 153                         label = "bthomehubv5a:red:broadband";
 154                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
 155                 };
 156                 broadband-green {
 157                         label = "bthomehubv5a:green:broadband";
 158                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 159                 };
 160                 broadband_blue: broadband-blue {
 161                         label = "bthomehubv5a:blue:broadband";
 162                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 163                 };
 164
 165                 /* wireless-* is a single RGB led */
 166                 wireless-red {
 167                         label = "bthomehubv5a:red:wireless";
 168                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 169                 };
 170                 wireless-green {
 171                         label = "bthomehubv5a:green:wireless";
 172                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 173                 };
 174                 wireless_blue: wireless-blue {
 175                         label = "bthomehubv5a:blue:wireless";
 176                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 177                 };
 178
 179                 /* power-* is a single RGB led */
 180                 power_red: power-red {
 181                         label = "bthomehubv5a:red:power";
 182                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 183                 };
 184                 power_green: power-green {
 185                         label = "bthomehubv5a:green:power";
 186                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 187                         default-state = "keep";
 188                 };
 189                 power_blue: power-blue {
 190                         label = "bthomehubv5a:blue:power";
 191                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 192                 };
 193
 194                 dimmed {
 195                         label = "dimmed";
 196                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
 197                 };
 198         };
 199 };
 200
 201 &pci0 {
 202         status = "okay";
 203         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 204
 205         wifi@168c,002d {
 206                 compatible = "pci168c,002d";
 207                 reg = <0x7000 0 0 0 0>;
 208                 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
 209                 qca,disable-5ghz;
 210                 mtd-mac-address = <&caldata 0x110c>;
 211                 mtd-mac-address-increment = <2>;
 212         };
 213 };
 214
 215 &eth0 {
 216         lan: interface@0 {
 217                 compatible = "lantiq,xrx200-pdi";
 218                 #address-cells = <1>;
 219                 #size-cells = <0>;
 220                 reg = <0>;
 221                 mtd-mac-address = <&caldata 0x110c>;
 222                 lantiq,switch;
 223
 224                 ethernet@0 {
 225                         compatible = "lantiq,xrx200-pdi-port";
 226                         reg = <0>;
 227                         phy-mode = "rgmii";
 228                         phy-handle = <&phy0>;
 229                 };
 230                 ethernet@1 {
 231                         compatible = "lantiq,xrx200-pdi-port";
 232                         reg = <1>;
 233                         phy-mode = "rgmii";
 234                         phy-handle = <&phy1>;
 235                 };
 236                 ethernet@2 {
 237                         compatible = "lantiq,xrx200-pdi-port";
 238                         reg = <2>;
 239                         phy-mode = "gmii";
 240                         phy-handle = <&phy11>;
 241                 };
 242                 ethernet@4 {
 243                         compatible = "lantiq,xrx200-pdi-port";
 244                         reg = <4>;
 245                         phy-mode = "gmii";
 246                         phy-handle = <&phy13>;
 247                 };
 248         };
 249
 250         wan: interface@1 {
 251                 compatible = "lantiq,xrx200-pdi";
 252                 #address-cells = <1>;
 253                 #size-cells = <0>;
 254                 reg = <1>;
 255                 mtd-mac-address = <&caldata 0x110c>;
 256                 mtd-mac-address-increment = <4>;
 257                 lantiq,wan;
 258
 259                 ethernet@5 {
 260                         compatible = "lantiq,xrx200-pdi-port";
 261                         reg = <5>;
 262                         phy-mode = "rgmii";
 263                         phy-handle = <&phy5>;
 264                 };
 265         };
 266
 267         mdio@0 {
 268                 #address-cells = <1>;
 269                 #size-cells = <0>;
 270                 compatible = "lantiq,xrx200-mdio";
 271
 272                 phy0: ethernet-phy@0 {
 273                         reg = <0x0>;
 274                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 275                 };
 276                 phy1: ethernet-phy@1 {
 277                         reg = <0x1>;
 278                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 279                 };
 280                 phy5: ethernet-phy@5 {
 281                         reg = <0x5>;
 282                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 283                 };
 284                 phy11: ethernet-phy@11 {
 285                         reg = <0x11>;
 286                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 287                 };
 288                 phy13: ethernet-phy@13 {
 289                         reg = <0x13>;
 290                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 291                 };
 292         };
 293 };