target/linux/lantiq/dts/EASY80920.dtsi

   1 /include/ "vr9.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
   6
   7                 leds {
   8                         boot = &power;
   9                         failsafe = &power;
  10                         running = &power;
  11
  12                         usb = &usb1;
  13                         usb2 = &usb2;
  14                 };
  15         };
  16
  17         memory@0 {
  18                 reg = <0x0 0x4000000>;
  19         };
  20
  21         fpi@10000000 {
  22                 #address-cells = <1>;
  23                 #size-cells = <1>;
  24                 compatible = "lantiq,fpi", "simple-bus";
  25                 ranges = <0x0 0x10000000 0xEEFFFFF>;
  26                 reg = <0x10000000 0xEF00000>;
  27
  28                 localbus@0 {
  29                         #address-cells = <2>;
  30                         #size-cells = <1>;
  31                         compatible = "lantiq,localbus", "simple-bus";
  32
  33                 };
  34
  35                 gpio: pinmux@E100B10 {
  36                         compatible = "lantiq,pinctrl-xr9";
  37                         pinctrl-names = "default";
  38                         pinctrl-0 = <&state_default>;
  39
  40                         interrupt-parent = <&icu0>;
  41                         interrupts = <166 135 66 40 41 42 38>;
  42
  43                         #gpio-cells = <2>;
  44                         gpio-controller;
  45                         reg = <0xE100B10 0xA0>;
  46
  47                         state_default: pinmux {
  48                                 exin3 {
  49                                         lantiq,groups = "exin3";
  50                                         lantiq,function = "exin";
  51                                 };
  52                                 stp {
  53                                         lantiq,groups = "stp";
  54                                         lantiq,function = "stp";
  55                                 };
  56                                 spi {
  57                                         lantiq,groups = "spi", "spi_cs4";
  58                                         lantiq,function = "spi";
  59                                 };
  60                                 nand {
  61                                         lantiq,groups = "nand cle", "nand ale",
  62                                                         "nand rd", "nand rdy";
  63                                         lantiq,function = "ebu";
  64                                 };
  65                                 mdio {
  66                                         lantiq,groups = "mdio";
  67                                         lantiq,function = "mdio";
  68                                 };
  69                                 pci {
  70                                         lantiq,groups = "gnt1", "req1";
  71                                         lantiq,function = "pci";
  72                                 };
  73                                 conf_out {
  74                                         lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
  75                                                         "io4", "io5", "io6", /* stp */
  76                                                         "io21",
  77                                                         "io33";
  78                                         lantiq,open-drain;
  79                                         lantiq,pull = <0>;
  80                                         lantiq,output = <1>;
  81                                 };
  82                                 pcie-rst {
  83                                         lantiq,pins = "io38";
  84                                         lantiq,pull = <0>;
  85                                         lantiq,output = <1>;
  86                                 };
  87                                 conf_in {
  88                                         lantiq,pins = "io39", /* exin3 */
  89                                                         "io48"; /* nand rdy */
  90                                         lantiq,pull = <2>;
  91                                 };
  92                         };
  93                 };
  94
  95                 eth@E108000 {
  96                         #address-cells = <1>;
  97                         #size-cells = <0>;
  98                         compatible = "lantiq,xrx200-net";
  99                         reg = < 0xE108000 0x3000 /* switch */
 100                                 0xE10B100 0x70 /* mdio */
 101                                 0xE10B1D8 0x30 /* mii */
 102                                 0xE10B308 0x30 /* pmac */
 103                         >;
 104                         interrupt-parent = <&icu0>;
 105                         interrupts = <73 72>;
 106
 107                         lan: interface@0 {
 108                                 compatible = "lantiq,xrx200-pdi";
 109                                 #address-cells = <1>;
 110                                 #size-cells = <0>;
 111                                 reg = <0>;
 112                                 mac-address = [ 00 11 22 33 44 55 ];
 113
 114                                 ethernet@0 {
 115                                         compatible = "lantiq,xrx200-pdi-port";
 116                                         reg = <0>;
 117                                         phy-mode = "rgmii";
 118                                         phy-handle = <&phy0>;
 119                                 };
 120                                 ethernet@1 {
 121                                         compatible = "lantiq,xrx200-pdi-port";
 122                                         reg = <1>;
 123                                         phy-mode = "rgmii";
 124                                         phy-handle = <&phy1>;
 125                                 };
 126                                 ethernet@2 {
 127                                         compatible = "lantiq,xrx200-pdi-port";
 128                                         reg = <2>;
 129                                         phy-mode = "gmii";
 130                                         phy-handle = <&phy11>;
 131                                 };
 132                         };
 133
 134                         wan: interface@1 {
 135                                 compatible = "lantiq,xrx200-pdi";
 136                                 #address-cells = <1>;
 137                                 #size-cells = <0>;
 138                                 reg = <1>;
 139                                 mac-address = [ 00 11 22 33 44 56 ];
 140                                 lantiq,wan;
 141                                 ethernet@5 {
 142                                         compatible = "lantiq,xrx200-pdi-port";
 143                                         reg = <5>;
 144                                         phy-mode = "rgmii";
 145                                         phy-handle = <&phy5>;
 146                                 };
 147                         };
 148
 149                         test: interface@2 {
 150                                 compatible = "lantiq,xrx200-pdi";
 151                                 #address-cells = <1>;
 152                                 #size-cells = <0>;
 153                                 reg = <2>;
 154                                 mac-address = [ 00 11 22 33 44 57 ];
 155                                 ethernet@4 {
 156                                         compatible = "lantiq,xrx200-pdi-port";
 157                                         reg = <4>;
 158                                         phynmode0 = "gmii";
 159                                         phy-handle = <&phy13>;
 160                                 };
 161                         };
 162
 163                         mdio@0 {
 164                                 #address-cells = <1>;
 165                                 #size-cells = <0>;
 166                                 compatible = "lantiq,xrx200-mdio";
 167                                 phy0: ethernet-phy@0 {
 168                                         reg = <0x0>;
 169                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 170                                 };
 171                                 phy1: ethernet-phy@1 {
 172                                         reg = <0x1>;
 173                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 174                                 };
 175                                 phy5: ethernet-phy@5 {
 176                                         reg = <0x5>;
 177                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 178                                 };
 179                                 phy11: ethernet-phy@11 {
 180                                         reg = <0x11>;
 181                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 182                                 };
 183                                 phy13: ethernet-phy@13 {
 184                                         reg = <0x13>;
 185                                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 186                                 };
 187                         };
 188                 };
 189
 190                 stp: stp@E100BB0 {
 191                         compatible = "lantiq,gpio-stp-xway";
 192                         reg = <0xE100BB0 0x40>;
 193                         #gpio-cells = <2>;
 194                         gpio-controller;
 195
 196                         lantiq,shadow = <0xffff>;
 197                         lantiq,groups = <0x7>;
 198                         lantiq,dsl = <0x3>;
 199                         lantiq,phy1 = <0x7>;
 200                         lantiq,phy2 = <0x7>;
 201                         /* lantiq,rising; */
 202                 };
 203
 204                 ifxhcd@E101000 {
 205                         status = "okay";
 206                         gpios = <&gpio 33 0>;
 207                         lantiq,portmask = <0x3>;
 208                 };
 209
 210                 pci@E105400 {
 211                         #address-cells = <3>;
 212                         #size-cells = <2>;
 213                         #interrupt-cells = <1>;
 214                         compatible = "lantiq,pci-xway1";
 215                         bus-range = <0x0 0x0>;
 216                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 217                                 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
 218                         reg = <0x7000000 0x8000         /* config space */
 219                                 0xE105400 0x400>;       /* pci bridge */
 220                         lantiq,bus-clock = <33333333>;
 221                         /*lantiq,external-clock;*/
 222                         lantiq,delay-hi = <0>; /* 0ns delay */
 223                         lantiq,delay-lo = <0>; /* 0.0ns delay */
 224                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 225                         interrupt-map = <
 226                                 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
 227                                 >;
 228                         gpios-reset = <&gpio 21 0>;
 229                         req-mask = <0x1>;       /* GNT1 */
 230                 };
 231         };
 232
 233         gphy-xrx200 {
 234                 compatible = "lantiq,phy-xrx200";
 235                 firmware = "lantiq/vr9_phy11g_a2x.bin";
 236                 phys = [ 00 01 ];
 237         };
 238
 239         gpio-keys-polled {
 240                 compatible = "gpio-keys-polled";
 241                 #address-cells = <1>;
 242                 #size-cells = <0>;
 243                 poll-interval = <100>;
 244 /*              reset {
 245                         label = "reset";
 246                         gpios = <&gpio 7 1>;
 247                         linux,code = <0x198>;
 248                 };*/
 249                 paging {
 250                         label = "paging";
 251                         gpios = <&gpio 11 1>;
 252                         linux,code = <0x100>;
 253                 };
 254         };
 255
 256         gpio-leds {
 257                 compatible = "gpio-leds";
 258
 259                 power: power {
 260                         label = "easy80920:green:power";
 261                         gpios = <&stp 9 0>;
 262                         default-state = "keep";
 263                 };
 264                 warning {
 265                         label = "easy80920:green:warning";
 266                         gpios = <&stp 22 0>;
 267                 };
 268                 fxs1 {
 269                         label = "easy80920:green:fxs1";
 270                         gpios = <&stp 21 0>;
 271                 };
 272                 fxs2 {
 273                         label = "easy80920:green:fxs2";
 274                         gpios = <&stp 20 0>;
 275                 };
 276                 fxo {
 277                         label = "easy80920:green:fxo";
 278                         gpios = <&stp 19 0>;
 279                 };
 280                 usb1: usb1 {
 281                         label = "easy80920:green:usb1";
 282                         gpios = <&stp 18 0>;
 283                 };
 284                 usb2: usb2 {
 285                         label = "easy80920:green:usb2";
 286                         gpios = <&stp 15 0>;
 287                 };
 288                 sd {
 289                         label = "easy80920:green:sd";
 290                         gpios = <&stp 14 0>;
 291                 };
 292                 wps {
 293                         label = "easy80920:green:wps";
 294                         gpios = <&stp 12 0>;
 295                 };
 296         };
 297 };
 298
 299 &spi {
 300         status = "ok";
 301
 302         m25p80@3 {
 303                 #address-cells = <1>;
 304                 #size-cells = <1>;
 305                 compatible = "jedec,spi-nor";
 306                 reg = <3 0>;
 307                 spi-max-frequency = <1000000>;
 308
 309                 partition@0 {
 310                         reg = <0x0 0x20000>;
 311                         label = "SPI (RO) U-Boot Image";
 312                         read-only;
 313                 };
 314
 315                 partition@20000 {
 316                         reg = <0x20000 0x10000>;
 317                         label = "ENV_MAC";
 318                         read-only;
 319                 };
 320
 321                 partition@30000 {
 322                         reg = <0x30000 0x10000>;
 323                         label = "DPF";
 324                         read-only;
 325                 };
 326
 327                 partition@40000 {
 328                         reg = <0x40000 0x10000>;
 329                         label = "NVRAM";
 330                         read-only;
 331                 };
 332
 333                 partition@500000 {
 334                         reg = <0x50000 0x003a0000>;
 335                         label = "kernel";
 336                 };
 337         };
 338 };