target/linux/ramips/dts/CreativeBox-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7621.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "xzwifi,creativebox-v1", "mediatek,mt7621-soc";
  11         model = "CreativeBox v1";
  12
  13         aliases {
  14                 led-boot = &led_sys;
  15                 led-failsafe = &led_sys;
  16                 led-running = &led_sys;
  17                 led-upgrade = &led_sys;
  18         };
  19
  20         memory@0 {
  21                 device_type = "memory";
  22                 reg = <0x0 0x1C000000>,
  23                       <0x20000000 0x4000000>;
  24         };
  25
  26         chosen {
  27                 bootargs = "console=ttyS0,115200";
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 power {
  34                         label = "creativebox-v1:blue:power";
  35                         gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
  36                         default-state = "on";
  37                 };
  38
  39                 led_sys: sys {
  40                         label = "creativebox-v1:blue:sys";
  41                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 internet {
  45                         label = "creativebox-v1:blue:internet";
  46                         gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wlan2g {
  50                         label = "creativebox-v1:blue:wlan2g";
  51                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  52                         linux,default-trigger = "phy0tpt";
  53                 };
  54
  55                 wlan5g {
  56                         label = "creativebox-v1:blue:wlan5g";
  57                         gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
  58                         linux,default-trigger = "phy1tpt";
  59                 };
  60         };
  61
  62         keys {
  63                 compatible = "gpio-keys-polled";
  64                 poll-interval = <20>;
  65
  66                 reset {
  67                         label = "reset";
  68                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  69                         linux,code = <KEY_RESTART>;
  70                 };
  71         };
  72
  73         gpio_export {
  74                 compatible = "gpio-export";
  75                 #size-cells = <0>;
  76
  77                 power_usb2 {
  78                         gpio-export,name = "power_usb2";
  79                         gpio-export,output = <1>;
  80                         gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
  81                 };
  82
  83                 power_usb3 {
  84                         gpio-export,name = "power_usb3";
  85                         gpio-export,output = <1>;
  86                         gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
  87                 };
  88
  89                 power_sata {
  90                         gpio-export,name = "power_sata";
  91                         gpio-export,output = <1>;
  92                         gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
  93                 };
  94         };
  95 };
  96
  97 &spi0 {
  98         status = "okay";
  99
 100         flash@0 {
 101                 compatible = "jedec,spi-nor";
 102                 reg = <0>;
 103                 spi-max-frequency = <40000000>;
 104
 105                 partitions {
 106                         compatible = "fixed-partitions";
 107                         #address-cells = <1>;
 108                         #size-cells = <1>;
 109
 110                         partition@0 {
 111                                 label = "u-boot";
 112                                 reg = <0x0 0x30000>;
 113                                 read-only;
 114                         };
 115
 116                         partition@30000 {
 117                                 label = "u-boot-env";
 118                                 reg = <0x30000 0x10000>;
 119                                 read-only;
 120                         };
 121
 122                         factory: partition@40000 {
 123                                 label = "factory";
 124                                 reg = <0x40000 0x10000>;
 125                                 read-only;
 126                         };
 127
 128                         partition@50000 {
 129                                 compatible = "denx,uimage";
 130                                 label = "firmware";
 131                                 reg = <0x50000 0x1fb0000>;
 132                         };
 133                 };
 134         };
 135 };
 136
 137 &sdhci {
 138         status = "okay";
 139 };
 140
 141 &pcie {
 142         status = "okay";
 143 };
 144
 145 &pcie0 {
 146         wifi@0,0 {
 147                 compatible = "pci1400,7603";
 148                 reg = <0x0000 0 0 0 0>;
 149                 mediatek,mtd-eeprom = <&factory 0x0000>;
 150         };
 151 };
 152
 153 &pcie1 {
 154         wifi@0,0 {
 155                 compatible = "pci14c3,7662";
 156                 reg = <0x0000 0 0 0 0>;
 157                 mediatek,mtd-eeprom = <&factory 0x8000>;
 158                 ieee80211-freq-limit = <5000000 6000000>;
 159         };
 160 };
 161
 162 &ethernet {
 163         mtd-mac-address = <&factory 0xe000>;
 164 };
 165
 166 &pinctrl {
 167         state_default: pinctrl0 {
 168                 gpio {
 169                         ralink,group = "wdt", "rgmii2";
 170                         ralink,function = "gpio";
 171                 };
 172         };
 173 };