target/linux/ramips/dts/R6120.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "netgear,r6120", "mediatek,mt7628an-soc";
  10         model = "Netgear AC1200 R6120";
  11
  12         aliases {
  13                 led-status = &led_power;
  14         };
  15
  16         memory@0 {
  17                 device_type = "memory";
  18                 reg = <0x0 0x4000000>;
  19         };
  20
  21         gpio-keys-polled {
  22                 compatible = "gpio-keys-polled";
  23                 poll-interval = <20>;
  24
  25                 reset {
  26                         label = "reset";
  27                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  28                         linux,code = <KEY_RESTART>;
  29                 };
  30         };
  31
  32         gpio-leds {
  33                 compatible = "gpio-leds";
  34
  35                 lan {
  36                         label = "r6120:green:lan";
  37                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 led_power: power {
  41                         label = "r6120:green:power";
  42                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 wlan {
  46                         label = "r6120:green:wlan2g";
  47                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wlan_orange {
  51                         label = "r6120:orange:wlan2g";
  52                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 wlan5 {
  56                         label = "r6120:green:wlan5g";
  57                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 wlan5_orange {
  61                         label = "r6120:orange:wlan5g";
  62                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  63                 };
  64         };
  65 };
  66
  67 &pinctrl {
  68         state_default: pinctrl0 {
  69                 gpio {
  70                         ralink,group = "p0led_an", "p1led_an", "p2led_an",
  71                                        "p3led_an", "p4led_an", "wdt", "wled_an";
  72                         ralink,function = "gpio";
  73                 };
  74         };
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         flash@0 {
  81                 compatible = "jedec,spi-nor";
  82                 reg = <0>;
  83                 spi-max-frequency = <10000000>;
  84                 m25p,chunked-io = <32>;
  85
  86                 partitions {
  87                         compatible = "fixed-partitions";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90
  91                         partition@0 {
  92                                 label = "u-boot";
  93                                 reg = <0x0 0x40000>;
  94                                 read-only;
  95                         };
  96
  97                         factory: partition@40000 {
  98                                 label = "factory";
  99                                 reg = <0x40000 0x20000>;
 100                                 read-only;
 101                         };
 102
 103                         nvram: partition@60000 {
 104                                 label = "nvram";
 105                                 reg = <0x60000 0x30000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@90000 {
 110                                 label = "firmware";
 111                                 reg = <0x90000 0xf60000>;
 112                         };
 113
 114                         partition@ff0000 {
 115                                 label = "reserved";
 116                                 reg = <0xff0000 0x10000>;
 117                                 read-only;
 118                         };
 119                 };
 120         };
 121 };
 122
 123 &wmac {
 124         status = "okay";
 125         mtd-mac-address = <&nvram 0x100b0>;
 126         mediatek,mtd-eeprom = <&factory 0x20000>;
 127 };
 128
 129 &ethernet {
 130         mtd-mac-address = <&nvram 0x100b0>;
 131 };
 132
 133 &pcie {
 134         status = "okay";
 135 };
 136
 137 &pcie0 {
 138         wifi@0,0 {
 139                 reg = <0x0000 0 0 0 0>;
 140                 mediatek,mtd-eeprom = <&factory 0x28000>;
 141                 ieee80211-freq-limit = <5000000 6000000>;
 142                 mtd-mac-address = <&nvram 0x100b0>;
 143                 mtd-mac-address-increment = <(2)>;
 144         };
 145 };