ramips/mt7620: Name DTS files based on scheme
[openwrt/staging/chunkeey.git] / target / linux / ramips / dts / TOTOLINK-A7000R.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7621.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10 compatible = "totolink,a7000r", "mediatek,mt7621-soc";
11 model = "TOTOLINK A7000R";
12
13 aliases {
14 led-boot = &led_sys;
15 led-failsafe = &led_sys;
16 led-running = &led_sys;
17 led-upgrade = &led_sys;
18 };
19
20 memory@0 {
21 device_type = "memory";
22 reg = <0x0 0x8000000>;
23 };
24
25 chosen {
26 bootargs = "console=ttyS0,57600";
27 };
28
29 leds {
30 compatible = "gpio-leds";
31
32 led_sys: sys {
33 label = "a7000r:blue:sys";
34 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
35 };
36 };
37
38 keys {
39 compatible = "gpio-keys";
40
41 reset {
42 label = "reset";
43 gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
44 debounce-interval = <60>;
45 linux,code = <KEY_RESTART>;
46 };
47 };
48 };
49
50 &spi0 {
51 status = "okay";
52
53 flash@0 {
54 compatible = "jedec,spi-nor";
55 reg = <0>;
56 spi-max-frequency = <40000000>;
57
58 partitions {
59 compatible = "fixed-partitions";
60 #address-cells = <1>;
61 #size-cells = <1>;
62
63 partition@0 {
64 label = "u-boot";
65 reg = <0x0 0x30000>;
66 read-only;
67 };
68
69 partition@30000 {
70 label = "u-boot-env";
71 reg = <0x30000 0x10000>;
72 read-only;
73 };
74
75 factory: partition@40000 {
76 label = "factory";
77 reg = <0x40000 0x10000>;
78 read-only;
79 };
80
81 partition@50000 {
82 compatible = "denx,uimage";
83 label = "firmware";
84 reg = <0x50000 0xfb0000>;
85 };
86 };
87 };
88 };
89
90 &pcie {
91 status = "okay";
92 };
93
94 &pcie0 {
95 wifi@0,0 {
96 compatible = "mediatek,mt76";
97 reg = <0x0000 0 0 0 0>;
98 mediatek,mtd-eeprom = <&factory 0x0000>;
99 ieee80211-freq-limit = <2400000 2500000>;
100 };
101 };
102
103 &pcie1 {
104 wifi@0,0 {
105 compatible = "mediatek,mt76";
106 reg = <0x0000 0 0 0 0>;
107 mediatek,mtd-eeprom = <&factory 0x8000>;
108 ieee80211-freq-limit = <5000000 6000000>;
109 };
110 };
111
112 &ethernet {
113 mtd-mac-address = <&factory 0xe000>;
114 };
115
116 &pinctrl {
117 state_default: pinctrl0 {
118 gpio {
119 ralink,group = "i2c", "wdt";
120 ralink,function = "gpio";
121 };
122 };
123 };