target/linux/ramips/dts/VR500.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Planex VR500";
   9
  10         memory@0 {
  11                 device_type = "memory";
  12                 reg = <0x0 0x10000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,57600";
  17         };
  18
  19         gpio-leds {
  20                 compatible = "gpio-leds";
  21
  22                 power {
  23                         label = "vr500:green:power";
  24                         gpios = <&gpio1 13 1>;
  25                 };
  26         };
  27
  28         gpio-keys-polled {
  29                 compatible = "gpio-keys-polled";
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32                 poll-interval = <20>;
  33
  34                 reset {
  35                         label = "reset";
  36                         gpios = <&gpio1 15 1>;
  37                         linux,code = <KEY_RESTART>;
  38                 };
  39         };
  40 };
  41
  42 &spi0 {
  43         status = "okay";
  44
  45         m25p80@0 {
  46                 #address-cells = <1>;
  47                 #size-cells = <1>;
  48                 compatible = "jedec,spi-nor";
  49                 reg = <0>;
  50                 spi-max-frequency = <10000000>;
  51                 m25p,chunked-io = <32>;
  52
  53                 partition@0 {
  54                         label = "u-boot";
  55                         reg = <0x0 0x30000>;
  56                         read-only;
  57                 };
  58
  59                 partition@30000 {
  60                         label = "u-boot-env";
  61                         reg = <0x30000 0x10000>;
  62                         read-only;
  63                 };
  64
  65                 factory: partition@40000 {
  66                         label = "factory";
  67                         reg = <0x40000 0x10000>;
  68                         read-only;
  69                 };
  70
  71                 partition@50000 {
  72                         label = "firmware";
  73                         reg = <0x50000 0x3fb0000>;
  74                 };
  75         };
  76 };
  77
  78 &pinctrl {
  79         state_default: pinctrl0 {
  80                 gpio {
  81                         ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
  82                         ralink,function = "gpio";
  83                 };
  84         };
  85 };