ipq40xx: only include ath10k-board-qca4019 for the generic subtarget

[openwrt/staging/chunkeey.git] / config / Config-images.in

diff --git a/config/Config-images.in b/config/Config-images.in
index 1866bb13254014ca1906461bc8d93fc9c01880b3..dcd7575c3e453547e4c0f1c0840d2b0222982a7b 100644 (file)
--- a/config/Config-images.in
+++ b/config/Config-images.in
@@ -1,8 +1,6 @@
-# Copyright (C) 2006-2013 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
+# SPDX-License-Identifier: GPL-2.0-only

 #
 #

+# Copyright (C) 2006-2013 OpenWrt.org

 
 menu "Target Images"
 
 
 menu "Target Images"
 


@@ -14,9 +12,12 @@ menu "Target Images"
 
                choice
                        prompt "Compression"
 
                choice
                        prompt "Compression"

-                       default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx
-                       default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips

                        default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_apm821xx
                        default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_apm821xx

+                       default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ath79_mikrotik
+                       default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_lantiq
+                       default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_mpc85xx
+                       default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips
+                       default TARGET_INITRAMFS_COMPRESSION_XZ if USES_SEPARATE_INITRAMFS

                        default TARGET_INITRAMFS_COMPRESSION_NONE
                        depends on TARGET_ROOTFS_INITRAMFS
                        help
                        default TARGET_INITRAMFS_COMPRESSION_NONE
                        depends on TARGET_ROOTFS_INITRAMFS
                        help


@@ -35,13 +36,19 @@ menu "Target Images"
                                bool "lzma"
 
                        config TARGET_INITRAMFS_COMPRESSION_LZO
                                bool "lzma"
 
                        config TARGET_INITRAMFS_COMPRESSION_LZO

+                               depends on !TARGET_ROOTFS_INITRAMFS_SEPARATE

                                bool "lzo"
 
                        config TARGET_INITRAMFS_COMPRESSION_LZ4
                                bool "lzo"
 
                        config TARGET_INITRAMFS_COMPRESSION_LZ4

+                               depends on !TARGET_ROOTFS_INITRAMFS_SEPARATE

                                bool "lz4"
 
                        config TARGET_INITRAMFS_COMPRESSION_XZ
                                bool "xz"
                                bool "lz4"
 
                        config TARGET_INITRAMFS_COMPRESSION_XZ
                                bool "xz"

+
+                       config TARGET_INITRAMFS_COMPRESSION_ZSTD
+                               depends on !LINUX_5_4 && !LINUX_4_19
+                               bool "zstd"

                endchoice
 
                config EXTERNAL_CPIO
                endchoice
 
                config EXTERNAL_CPIO


@@ -51,6 +58,22 @@ menu "Target Images"
                        help
                          Kernel uses specified external cpio as INITRAMFS_SOURCE.
 
                        help
                          Kernel uses specified external cpio as INITRAMFS_SOURCE.
 

+               config TARGET_INITRAMFS_FORCE
+                       bool "Force"
+                       depends on TARGET_ROOTFS_INITRAMFS
+                       default n
+                       help
+                         Ignore the initramfs passed by the bootloader.
+
+               config TARGET_ROOTFS_INITRAMFS_SEPARATE
+                       bool "separate ramdisk"
+                       depends on USES_SEPARATE_INITRAMFS && TARGET_ROOTFS_INITRAMFS && !TARGET_INITRAMFS_FORCE
+                       default y if USES_SEPARATE_INITRAMFS
+                       help
+                         Generate separate initrd.cpio instead of embedding it.
+                         This is useful for generating images with a dedicated
+                         ramdisk e.g. in U-Boot's uImage and uImage.FIT formats.
+

        comment "Root filesystem archives"
 
        config TARGET_ROOTFS_CPIOGZ
        comment "Root filesystem archives"
 
        config TARGET_ROOTFS_CPIOGZ


@@ -111,13 +134,6 @@ menu "Target Images"
                        help
                          Create an ext4 filesystem with a journal.
 
                        help
                          Create an ext4 filesystem with a journal.
 

-       config TARGET_ROOTFS_ISO
-               bool "iso"
-               default n
-               depends on TARGET_x86_generic
-               help
-                 Create a bootable ISO image.
-

        config TARGET_ROOTFS_JFFS2
                bool "jffs2"
                depends on USES_JFFS2
        config TARGET_ROOTFS_JFFS2
                bool "jffs2"
                depends on USES_JFFS2


@@ -141,6 +157,7 @@ menu "Target Images"
                        int "Block size (in KiB)"
                        depends on TARGET_ROOTFS_SQUASHFS
                        default 64 if LOW_MEMORY_FOOTPRINT
                        int "Block size (in KiB)"
                        depends on TARGET_ROOTFS_SQUASHFS
                        default 64 if LOW_MEMORY_FOOTPRINT

+                       default 1024 if (SMALL_FLASH && !LOW_MEMORY_FOOTPRINT)

                        default 256
 
        menuconfig TARGET_ROOTFS_UBIFS
                        default 256
 
        menuconfig TARGET_ROOTFS_UBIFS


@@ -181,64 +198,89 @@ menu "Target Images"
        config GRUB_IMAGES
                bool "Build GRUB images (Linux x86 or x86_64 host only)"
                depends on TARGET_x86
        config GRUB_IMAGES
                bool "Build GRUB images (Linux x86 or x86_64 host only)"
                depends on TARGET_x86

-               depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_ISO || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
+               depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS
+               select PACKAGE_grub2
+               select PACKAGE_grub2-bios-setup
+               default y
+
+       config GRUB_EFI_IMAGES
+               bool "Build GRUB EFI images (Linux x86 or x86_64 host only)"
+               depends on TARGET_x86
+               depends on TARGET_ROOTFS_EXT4FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS

                select PACKAGE_grub2
                select PACKAGE_grub2

+               select PACKAGE_grub2-efi
+               select PACKAGE_grub2-bios-setup
+               select PACKAGE_kmod-fs-vfat

                default y
 
        config GRUB_CONSOLE
                bool "Use Console Terminal (in addition to Serial)"
                default y
 
        config GRUB_CONSOLE
                bool "Use Console Terminal (in addition to Serial)"

-               depends on GRUB_IMAGES
-               default n if (TARGET_x86_generic_Soekris45xx || TARGET_x86_generic_Soekris48xx || TARGET_x86_net5501 || TARGET_x86_geos || TARGET_x86_alix2)
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES

                default y
 
        config GRUB_SERIAL
                string "Serial port device"
                default y
 
        config GRUB_SERIAL
                string "Serial port device"

-               depends on GRUB_IMAGES
-               default "hvc0" if TARGET_x86_xen_domu
-               default "ttyS0" if ! TARGET_x86_xen_domu
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES
+               default "ttyS0"

 
        config GRUB_BAUDRATE
                int "Serial port baud rate"
 
        config GRUB_BAUDRATE
                int "Serial port baud rate"

-               depends on GRUB_IMAGES
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES

                default 38400 if TARGET_x86_generic
                default 38400 if TARGET_x86_generic

-               default 38400 if TARGET_x86_geode

                default 115200
 
                default 115200
 

+       config GRUB_FLOWCONTROL
+               bool "Use RTE/CTS on serial console"
+               depends on GRUB_SERIAL != ""
+               default n
+

        config GRUB_BOOTOPTS
                string "Extra kernel boot options"
        config GRUB_BOOTOPTS
                string "Extra kernel boot options"

-               depends on GRUB_IMAGES
-               default "xencons=hvc" if TARGET_x86_xen_domu
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES

                help
                  If you don't know, just leave it blank.
 
        config GRUB_TIMEOUT
                string "Seconds to wait before booting the default entry"
                help
                  If you don't know, just leave it blank.
 
        config GRUB_TIMEOUT
                string "Seconds to wait before booting the default entry"

-               depends on GRUB_IMAGES
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES

                default "5"
                help
                  If you don't know, 5 seconds is a reasonable default.
 
                default "5"
                help
                  If you don't know, 5 seconds is a reasonable default.
 

+       config GRUB_TITLE
+               string "Title for the menu entry in GRUB"
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES
+               default "OpenWrt"
+               help
+                 This is the title of the GRUB menu entry.
+                 If unspecified, it defaults to OpenWrt.
+
+       config ISO_IMAGES
+               bool "Build LiveCD image (ISO)"
+               depends on TARGET_x86
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES
+

        config VDI_IMAGES
                bool "Build VirtualBox image files (VDI)"
        config VDI_IMAGES
                bool "Build VirtualBox image files (VDI)"

-               depends on TARGET_x86 || TARGET_x86_64
-               select GRUB_IMAGES
-               select TARGET_IMAGES_PAD
+               depends on TARGET_x86
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES

                select PACKAGE_kmod-e1000
 
        config VMDK_IMAGES
                bool "Build VMware image files (VMDK)"
                select PACKAGE_kmod-e1000
 
        config VMDK_IMAGES
                bool "Build VMware image files (VMDK)"

-               depends on TARGET_x86 || TARGET_x86_64
-               select GRUB_IMAGES
-               select TARGET_IMAGES_PAD
+               depends on TARGET_x86
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES

                select PACKAGE_kmod-e1000
 
                select PACKAGE_kmod-e1000
 

-       config TARGET_IMAGES_PAD
-               bool "Pad images to filesystem size (for JFFS2)"
-               depends on GRUB_IMAGES
+       config VHDX_IMAGES
+               bool "Build Hyper-V image files (VHDX)"
+               depends on TARGET_x86
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES
+               select PACKAGE_kmod-e1000

 
        config TARGET_IMAGES_GZIP
                bool "GZip images"
 
        config TARGET_IMAGES_GZIP
                bool "GZip images"

-               depends on TARGET_IMAGES_PAD || TARGET_ROOTFS_EXT4FS
+               depends on TARGET_ROOTFS_EXT4FS || TARGET_x86 || TARGET_armvirt || TARGET_malta

                default y
 
        comment "Image Options"
                default y
 
        comment "Image Options"


@@ -246,24 +288,33 @@ menu "Target Images"
        source "target/linux/*/image/Config.in"
 
        config TARGET_KERNEL_PARTSIZE
        source "target/linux/*/image/Config.in"
 
        config TARGET_KERNEL_PARTSIZE

-               int "Kernel partition size (in MB)"
-               depends on GRUB_IMAGES
-               default 4
+               int "Kernel partition size (in MiB)"
+               depends on USES_BOOT_PART
+               default 8 if TARGET_apm821xx_sata
+               default 64 if TARGET_bcm27xx
+               default 16

 
        config TARGET_ROOTFS_PARTSIZE
 
        config TARGET_ROOTFS_PARTSIZE

-               int "Root filesystem partition size (in MB)"
-               depends on GRUB_IMAGES || TARGET_ROOTFS_EXT4FS || TARGET_rb532 || TARGET_mvebu
-               default 2048 if TARGET_x86
-               default 256 if ! TARGET_x86
+               int "Root filesystem partition size (in MiB)"
+               depends on USES_ROOTFS_PART || TARGET_ROOTFS_EXT4FS
+               default 104

                help
                  Select the root filesystem partition size.
 
        config TARGET_ROOTFS_PARTNAME
                string "Root partition on target device"
                help
                  Select the root filesystem partition size.
 
        config TARGET_ROOTFS_PARTNAME
                string "Root partition on target device"

-               depends on GRUB_IMAGES
+               depends on GRUB_IMAGES || GRUB_EFI_IMAGES

                help
                  Override the root partition on the final device. If left empty,
                  it will be mounted by PARTUUID which makes the kernel find the
                  appropriate disk automatically.
 
                help
                  Override the root partition on the final device. If left empty,
                  it will be mounted by PARTUUID which makes the kernel find the
                  appropriate disk automatically.
 

+       config TARGET_ROOTFS_PERSIST_VAR
+               bool "Make /var persistent"
+               default n
+               help
+                 Do not symlink /var to /tmp, so that its content will persist
+                 across reboots. When enabled, /var/run will still be linked
+                 to /tmp/run.
+

 endmenu
 endmenu