+++ /dev/null
-#
-# Copyright (C) 2008-2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=broadcom-57xx
-PKG_RELEASE:=2
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/brcm-57xx
- SUBMENU:=Network Devices
- DEPENDS:=@TARGET_brcm_2_4 +kmod-switch
- TITLE:=Broadcom 57xx ethernet support
- FILES:=$(PKG_BUILD_DIR)/bcm57xx.$(LINUX_KMOD_SUFFIX)
- AUTOLOAD:=$(call AutoLoad,30,bcm57xx)
-endef
-
-define Build/Prepare
- mkdir -p $(PKG_BUILD_DIR)
- $(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-ifeq ($(BOARD),brcm-2.4)
- BUILDFLAGS := \
- -DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include $(TARGET_CPPFLAGS) \
- -DDBG=0 -DBCM_PROC_FS=1 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256 -DNICE_SUPPORT \
- -DPCIX_TARGET_WORKAROUND=1 -DINCLUDE_TBI_SUPPORT=1 -DINCLUDE_5701_AX_FIX=1
-endif
-
-define Build/Compile
- $(MAKE) -C "$(LINUX_DIR)" \
- CROSS_COMPILE="$(TARGET_CROSS)" \
- ARCH="$(LINUX_KARCH)" \
- SUBDIRS="$(PKG_BUILD_DIR)" \
- EXTRA_CFLAGS="$(BUILDFLAGS)" \
- modules
-endef
-
-define KernelPackage/brcm-57xx/install
- $(call Package/brcm-57xx/install/Default,$(1))
- #$(INSTALL_DIR) $(1)/etc/modules.d
- #echo "bcm57xx activate_gpio=1" > $(1)/etc/modules.d/30-bcm57xx
-endef
-
-$(eval $(call KernelPackage,brcm-57xx))
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* History: */
-/* */
-/******************************************************************************/
-
-#ifdef INCLUDE_5701_AX_FIX
-
-#include "mm.h"
-#include "5701rls.h"
-
-LM_STATUS LM_LoadRlsFirmware(PLM_DEVICE_BLOCK pDevice)
-{
- T3_FWIMG_INFO FwImgInfo;
-
- FwImgInfo.StartAddress = t3FwStartAddr;
- FwImgInfo.Text.Buffer = (PLM_UINT8)t3FwText;
- FwImgInfo.Text.Offset = t3FwTextAddr;
- FwImgInfo.Text.Length = t3FwTextLen;
- FwImgInfo.ROnlyData.Buffer = (PLM_UINT8)t3FwRodata;
- FwImgInfo.ROnlyData.Offset = t3FwRodataAddr;
- FwImgInfo.ROnlyData.Length = t3FwRodataLen;
- FwImgInfo.Data.Buffer = (PLM_UINT8)t3FwData;
- FwImgInfo.Data.Offset = t3FwDataAddr;
- FwImgInfo.Data.Length = t3FwDataLen;
-
- if (LM_LoadFirmware(pDevice,
- &FwImgInfo,
- T3_RX_CPU_ID | T3_TX_CPU_ID,
- T3_RX_CPU_ID) != LM_STATUS_SUCCESS)
- {
- return LM_STATUS_FAILURE;
- }
-
- return LM_STATUS_SUCCESS;
-}
-
-#endif /* INCLUDE_5701_AX_FIX */
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* History: */
-/******************************************************************************/
-
-typedef unsigned long U32;
-int t3FwReleaseMajor = 0x0;
-int t3FwReleaseMinor = 0x0;
-int t3FwReleaseFix = 0x0;
-U32 t3FwStartAddr = 0x08000000;
-U32 t3FwTextAddr = 0x08000000;
-int t3FwTextLen = 0x9c0;
-U32 t3FwRodataAddr = 0x080009c0;
-int t3FwRodataLen = 0x60;
-U32 t3FwDataAddr = 0x08000a40;
-int t3FwDataLen = 0x20;
-U32 t3FwSbssAddr = 0x08000a60;
-int t3FwSbssLen = 0xc;
-U32 t3FwBssAddr = 0x08000a70;
-int t3FwBssLen = 0x10;
-U32 t3FwText[(0x9c0/4) + 1] = {
-0x0,
-0x10000003, 0x0, 0xd, 0xd,
-0x3c1d0800, 0x37bd3ffc, 0x3a0f021, 0x3c100800,
-0x26100000, 0xe000018, 0x0, 0xd,
-0x3c1d0800, 0x37bd3ffc, 0x3a0f021, 0x3c100800,
-0x26100034, 0xe00021c, 0x0, 0xd,
-0x0, 0x0, 0x0, 0x27bdffe0,
-0x3c1cc000, 0xafbf0018, 0xaf80680c, 0xe00004c,
-0x241b2105, 0x97850000, 0x97870002, 0x9782002c,
-0x9783002e, 0x3c040800, 0x248409c0, 0xafa00014,
-0x21400, 0x621825, 0x52c00, 0xafa30010,
-0x8f860010, 0xe52825, 0xe000060, 0x24070102,
-0x3c02ac00, 0x34420100, 0x3c03ac01, 0x34630100,
-0xaf820490, 0x3c02ffff, 0xaf820494, 0xaf830498,
-0xaf82049c, 0x24020001, 0xaf825ce0, 0xe00003f,
-0xaf825d00, 0xe000140, 0x0, 0x8fbf0018,
-0x3e00008, 0x27bd0020, 0x2402ffff, 0xaf825404,
-0x8f835400, 0x34630400, 0xaf835400, 0xaf825404,
-0x3c020800, 0x24420034, 0xaf82541c, 0x3e00008,
-0xaf805400, 0x0, 0x0, 0x3c020800,
-0x34423000, 0x3c030800, 0x34633000, 0x3c040800,
-0x348437ff, 0x3c010800, 0xac220a64, 0x24020040,
-0x3c010800, 0xac220a68, 0x3c010800, 0xac200a60,
-0xac600000, 0x24630004, 0x83102b, 0x5040fffd,
-0xac600000, 0x3e00008, 0x0, 0x804821,
-0x8faa0010, 0x3c020800, 0x8c420a60, 0x3c040800,
-0x8c840a68, 0x8fab0014, 0x24430001, 0x44102b,
-0x3c010800, 0xac230a60, 0x14400003, 0x4021,
-0x3c010800, 0xac200a60, 0x3c020800, 0x8c420a60,
-0x3c030800, 0x8c630a64, 0x91240000, 0x21140,
-0x431021, 0x481021, 0x25080001, 0xa0440000,
-0x29020008, 0x1440fff4, 0x25290001, 0x3c020800,
-0x8c420a60, 0x3c030800, 0x8c630a64, 0x8f84680c,
-0x21140, 0x431021, 0xac440008, 0xac45000c,
-0xac460010, 0xac470014, 0xac4a0018, 0x3e00008,
-0xac4b001c, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x2000008,
-0x0, 0xa0001e3, 0x3c0a0001, 0xa0001e3,
-0x3c0a0002, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x3c0a0007, 0xa0001e3, 0x3c0a0008, 0xa0001e3,
-0x3c0a0009, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x3c0a000b, 0xa0001e3,
-0x3c0a000c, 0xa0001e3, 0x3c0a000d, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x3c0a000e, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x3c0a0013, 0xa0001e3,
-0x3c0a0014, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x27bdffe0,
-0x1821, 0x1021, 0xafbf0018, 0xafb10014,
-0xafb00010, 0x3c010800, 0x220821, 0xac200a70,
-0x3c010800, 0x220821, 0xac200a74, 0x3c010800,
-0x220821, 0xac200a78, 0x24630001, 0x1860fff5,
-0x2442000c, 0x24110001, 0x8f906810, 0x32020004,
-0x14400005, 0x24040001, 0x3c020800, 0x8c420a78,
-0x18400003, 0x2021, 0xe000182, 0x0,
-0x32020001, 0x10400003, 0x0, 0xe000169,
-0x0, 0xa000153, 0xaf915028, 0x8fbf0018,
-0x8fb10014, 0x8fb00010, 0x3e00008, 0x27bd0020,
-0x3c050800, 0x8ca50a70, 0x3c060800, 0x8cc60a80,
-0x3c070800, 0x8ce70a78, 0x27bdffe0, 0x3c040800,
-0x248409d0, 0xafbf0018, 0xafa00010, 0xe000060,
-0xafa00014, 0xe00017b, 0x2021, 0x8fbf0018,
-0x3e00008, 0x27bd0020, 0x24020001, 0x8f836810,
-0x821004, 0x21027, 0x621824, 0x3e00008,
-0xaf836810, 0x27bdffd8, 0xafbf0024, 0x1080002e,
-0xafb00020, 0x8f825cec, 0xafa20018, 0x8f825cec,
-0x3c100800, 0x26100a78, 0xafa2001c, 0x34028000,
-0xaf825cec, 0x8e020000, 0x18400016, 0x0,
-0x3c020800, 0x94420a74, 0x8fa3001c, 0x221c0,
-0xac830004, 0x8fa2001c, 0x3c010800, 0xe000201,
-0xac220a74, 0x10400005, 0x0, 0x8e020000,
-0x24420001, 0xa0001df, 0xae020000, 0x3c020800,
-0x8c420a70, 0x21c02, 0x321c0, 0xa0001c5,
-0xafa2001c, 0xe000201, 0x0, 0x1040001f,
-0x0, 0x8e020000, 0x8fa3001c, 0x24420001,
-0x3c010800, 0xac230a70, 0x3c010800, 0xac230a74,
-0xa0001df, 0xae020000, 0x3c100800, 0x26100a78,
-0x8e020000, 0x18400028, 0x0, 0xe000201,
-0x0, 0x14400024, 0x0, 0x8e020000,
-0x3c030800, 0x8c630a70, 0x2442ffff, 0xafa3001c,
-0x18400006, 0xae020000, 0x31402, 0x221c0,
-0x8c820004, 0x3c010800, 0xac220a70, 0x97a2001e,
-0x2442ff00, 0x2c420300, 0x1440000b, 0x24024000,
-0x3c040800, 0x248409dc, 0xafa00010, 0xafa00014,
-0x8fa6001c, 0x24050008, 0xe000060, 0x3821,
-0xa0001df, 0x0, 0xaf825cf8, 0x3c020800,
-0x8c420a40, 0x8fa3001c, 0x24420001, 0xaf835cf8,
-0x3c010800, 0xac220a40, 0x8fbf0024, 0x8fb00020,
-0x3e00008, 0x27bd0028, 0x27bdffe0, 0x3c040800,
-0x248409e8, 0x2821, 0x3021, 0x3821,
-0xafbf0018, 0xafa00010, 0xe000060, 0xafa00014,
-0x8fbf0018, 0x3e00008, 0x27bd0020, 0x8f82680c,
-0x8f85680c, 0x21827, 0x3182b, 0x31823,
-0x431024, 0x441021, 0xa2282b, 0x10a00006,
-0x0, 0x401821, 0x8f82680c, 0x43102b,
-0x1440fffd, 0x0, 0x3e00008, 0x0,
-0x3c040800, 0x8c840000, 0x3c030800, 0x8c630a40,
-0x64102b, 0x54400002, 0x831023, 0x641023,
-0x2c420008, 0x3e00008, 0x38420001, 0x27bdffe0,
-0x802821, 0x3c040800, 0x24840a00, 0x3021,
-0x3821, 0xafbf0018, 0xafa00010, 0xe000060,
-0xafa00014, 0xa000216, 0x0, 0x8fbf0018,
-0x3e00008, 0x27bd0020, 0x0, 0x27bdffe0,
-0x3c1cc000, 0xafbf0018, 0xe00004c, 0xaf80680c,
-0x3c040800, 0x24840a10, 0x3802821, 0x3021,
-0x3821, 0xafa00010, 0xe000060, 0xafa00014,
-0x2402ffff, 0xaf825404, 0x3c0200aa, 0xe000234,
-0xaf825434, 0x8fbf0018, 0x3e00008, 0x27bd0020,
-0x0, 0x0, 0x0, 0x27bdffe8,
-0xafb00010, 0x24100001, 0xafbf0014, 0x3c01c003,
-0xac200000, 0x8f826810, 0x30422000, 0x10400003,
-0x0, 0xe000246, 0x0, 0xa00023a,
-0xaf905428, 0x8fbf0014, 0x8fb00010, 0x3e00008,
-0x27bd0018, 0x27bdfff8, 0x8f845d0c, 0x3c0200ff,
-0x3c030800, 0x8c630a50, 0x3442fff8, 0x821024,
-0x1043001e, 0x3c0500ff, 0x34a5fff8, 0x3c06c003,
-0x3c074000, 0x851824, 0x8c620010, 0x3c010800,
-0xac230a50, 0x30420008, 0x10400005, 0x871025,
-0x8cc20000, 0x24420001, 0xacc20000, 0x871025,
-0xaf825d0c, 0x8fa20000, 0x24420001, 0xafa20000,
-0x8fa20000, 0x8fa20000, 0x24420001, 0xafa20000,
-0x8fa20000, 0x8f845d0c, 0x3c030800, 0x8c630a50,
-0x851024, 0x1443ffe8, 0x851824, 0x27bd0008,
-0x3e00008, 0x0, 0x0, 0x0 };
-U32 t3FwRodata[(0x60/4) + 1] = {
-0x35373031, 0x726c7341, 0x0,
-0x0, 0x53774576, 0x656e7430, 0x0,
-0x726c7045, 0x76656e74, 0x31000000, 0x556e6b6e,
-0x45766e74, 0x0, 0x0, 0x0,
-0x0, 0x66617461, 0x6c457272, 0x0,
-0x0, 0x4d61696e, 0x43707542, 0x0,
-0x0, 0x0 };
-U32 t3FwData[(0x20/4) + 1] = {
-0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0 };
+++ /dev/null
-#
-# Broadcom BCM57XX Gigabit Ethernet driver make file.
-#
-#
-
-O_TARGET = bcm57xx.o
-
-EXTRA_CFLAGS += -DDBG=0 -DBCM_PROC_FS=1 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256
-EXTRA_CFLAGS += -DPCIX_TARGET_WORKAROUND=1 -DINCLUDE_TBI_SUPPORT=1 -DINCLUDE_5701_AX_FIX=1
-
-export-objs :=
-
-obj-y := b57um.o tigon3.o autoneg.o 5701rls.o tcp_seg.o hndgige.o bcmrobo.o
-obj-m := $(O_TARGET)
-
-include $(TOPDIR)/Rules.make
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* History: */
-/******************************************************************************/
-
-#ifdef INCLUDE_TBI_SUPPORT
-#include "mm.h"
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-void
-MM_AnTxConfig(
- PAN_STATE_INFO pAnInfo)
-{
- PLM_DEVICE_BLOCK pDevice;
-
- pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
-
- REG_WR(pDevice, MacCtrl.TxAutoNeg, (LM_UINT32) pAnInfo->TxConfig.AsUSHORT);
-
- pDevice->MacMode |= MAC_MODE_SEND_CONFIGS;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
-}
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-void
-MM_AnTxIdle(
- PAN_STATE_INFO pAnInfo)
-{
- PLM_DEVICE_BLOCK pDevice;
-
- pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
-
- pDevice->MacMode &= ~MAC_MODE_SEND_CONFIGS;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
-}
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-char
-MM_AnRxConfig(
- PAN_STATE_INFO pAnInfo,
- unsigned short *pRxConfig)
-{
- PLM_DEVICE_BLOCK pDevice;
- LM_UINT32 Value32;
- char Retcode;
-
- Retcode = AN_FALSE;
-
- pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
-
- Value32 = REG_RD(pDevice, MacCtrl.Status);
- if(Value32 & MAC_STATUS_RECEIVING_CFG)
- {
- Value32 = REG_RD(pDevice, MacCtrl.RxAutoNeg);
- *pRxConfig = (unsigned short) Value32;
-
- Retcode = AN_TRUE;
- }
-
- return Retcode;
-}
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-void
-AutonegInit(
- PAN_STATE_INFO pAnInfo)
-{
- unsigned long j;
-
- for(j = 0; j < sizeof(AN_STATE_INFO); j++)
- {
- ((unsigned char *) pAnInfo)[j] = 0;
- }
-
- /* Initialize the default advertisement register. */
- pAnInfo->mr_adv_full_duplex = 1;
- pAnInfo->mr_adv_sym_pause = 1;
- pAnInfo->mr_adv_asym_pause = 1;
- pAnInfo->mr_an_enable = 1;
-}
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-AUTONEG_STATUS
-Autoneg8023z(
- PAN_STATE_INFO pAnInfo)
-{
- unsigned short RxConfig;
- unsigned long Delta_us;
- AUTONEG_STATUS AnRet;
-
- /* Get the current time. */
- if(pAnInfo->State == AN_STATE_UNKNOWN)
- {
- pAnInfo->RxConfig.AsUSHORT = 0;
- pAnInfo->CurrentTime_us = 0;
- pAnInfo->LinkTime_us = 0;
- pAnInfo->AbilityMatchCfg = 0;
- pAnInfo->AbilityMatchCnt = 0;
- pAnInfo->AbilityMatch = AN_FALSE;
- pAnInfo->IdleMatch = AN_FALSE;
- pAnInfo->AckMatch = AN_FALSE;
- }
-
- /* Increment the timer tick. This function is called every microsecon. */
-// pAnInfo->CurrentTime_us++;
-
- /* Set the AbilityMatch, IdleMatch, and AckMatch flags if their */
- /* corresponding conditions are satisfied. */
- if(MM_AnRxConfig(pAnInfo, &RxConfig))
- {
- if(RxConfig != pAnInfo->AbilityMatchCfg)
- {
- pAnInfo->AbilityMatchCfg = RxConfig;
- pAnInfo->AbilityMatch = AN_FALSE;
- pAnInfo->AbilityMatchCnt = 0;
- }
- else
- {
- pAnInfo->AbilityMatchCnt++;
- if(pAnInfo->AbilityMatchCnt > 1)
- {
- pAnInfo->AbilityMatch = AN_TRUE;
- pAnInfo->AbilityMatchCfg = RxConfig;
- }
- }
-
- if(RxConfig & AN_CONFIG_ACK)
- {
- pAnInfo->AckMatch = AN_TRUE;
- }
- else
- {
- pAnInfo->AckMatch = AN_FALSE;
- }
-
- pAnInfo->IdleMatch = AN_FALSE;
- }
- else
- {
- pAnInfo->IdleMatch = AN_TRUE;
-
- pAnInfo->AbilityMatchCfg = 0;
- pAnInfo->AbilityMatchCnt = 0;
- pAnInfo->AbilityMatch = AN_FALSE;
- pAnInfo->AckMatch = AN_FALSE;
-
- RxConfig = 0;
- }
-
- /* Save the last Config. */
- pAnInfo->RxConfig.AsUSHORT = RxConfig;
-
- /* Default return code. */
- AnRet = AUTONEG_STATUS_OK;
-
- /* Autoneg state machine as defined in 802.3z section 37.3.1.5. */
- switch(pAnInfo->State)
- {
- case AN_STATE_UNKNOWN:
- if(pAnInfo->mr_an_enable || pAnInfo->mr_restart_an)
- {
- pAnInfo->CurrentTime_us = 0;
- pAnInfo->State = AN_STATE_AN_ENABLE;
- }
-
- /* Fall through.*/
-
- case AN_STATE_AN_ENABLE:
- pAnInfo->mr_an_complete = AN_FALSE;
- pAnInfo->mr_page_rx = AN_FALSE;
-
- if(pAnInfo->mr_an_enable)
- {
- pAnInfo->LinkTime_us = 0;
- pAnInfo->AbilityMatchCfg = 0;
- pAnInfo->AbilityMatchCnt = 0;
- pAnInfo->AbilityMatch = AN_FALSE;
- pAnInfo->IdleMatch = AN_FALSE;
- pAnInfo->AckMatch = AN_FALSE;
-
- pAnInfo->State = AN_STATE_AN_RESTART_INIT;
- }
- else
- {
- pAnInfo->State = AN_STATE_DISABLE_LINK_OK;
- }
- break;
-
- case AN_STATE_AN_RESTART_INIT:
- pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
- pAnInfo->mr_np_loaded = AN_FALSE;
-
- pAnInfo->TxConfig.AsUSHORT = 0;
- MM_AnTxConfig(pAnInfo);
-
- AnRet = AUTONEG_STATUS_TIMER_ENABLED;
-
- pAnInfo->State = AN_STATE_AN_RESTART;
-
- /* Fall through.*/
-
- case AN_STATE_AN_RESTART:
- /* Get the current time and compute the delta with the saved */
- /* link timer. */
- Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
- if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
- {
- pAnInfo->State = AN_STATE_ABILITY_DETECT_INIT;
- }
- else
- {
- AnRet = AUTONEG_STATUS_TIMER_ENABLED;
- }
- break;
-
- case AN_STATE_DISABLE_LINK_OK:
- AnRet = AUTONEG_STATUS_DONE;
- break;
-
- case AN_STATE_ABILITY_DETECT_INIT:
- /* Note: in the state diagram, this variable is set to */
- /* mr_adv_ability<12>. Is this right?. */
- pAnInfo->mr_toggle_tx = AN_FALSE;
-
- /* Send the config as advertised in the advertisement register. */
- pAnInfo->TxConfig.AsUSHORT = 0;
- pAnInfo->TxConfig.D5_FD = pAnInfo->mr_adv_full_duplex;
- pAnInfo->TxConfig.D6_HD = pAnInfo->mr_adv_half_duplex;
- pAnInfo->TxConfig.D7_PS1 = pAnInfo->mr_adv_sym_pause;
- pAnInfo->TxConfig.D8_PS2 = pAnInfo->mr_adv_asym_pause;
- pAnInfo->TxConfig.D12_RF1 = pAnInfo->mr_adv_remote_fault1;
- pAnInfo->TxConfig.D13_RF2 = pAnInfo->mr_adv_remote_fault2;
- pAnInfo->TxConfig.D15_NP = pAnInfo->mr_adv_next_page;
-
- MM_AnTxConfig(pAnInfo);
-
- pAnInfo->State = AN_STATE_ABILITY_DETECT;
-
- break;
-
- case AN_STATE_ABILITY_DETECT:
- if(pAnInfo->AbilityMatch == AN_TRUE &&
- pAnInfo->RxConfig.AsUSHORT != 0)
- {
- pAnInfo->State = AN_STATE_ACK_DETECT_INIT;
- }
-
- break;
-
- case AN_STATE_ACK_DETECT_INIT:
- pAnInfo->TxConfig.D14_ACK = 1;
- MM_AnTxConfig(pAnInfo);
-
- pAnInfo->State = AN_STATE_ACK_DETECT;
-
- /* Fall through. */
-
- case AN_STATE_ACK_DETECT:
- if(pAnInfo->AckMatch == AN_TRUE)
- {
- if((pAnInfo->RxConfig.AsUSHORT & ~AN_CONFIG_ACK) ==
- (pAnInfo->AbilityMatchCfg & ~AN_CONFIG_ACK))
- {
- pAnInfo->State = AN_STATE_COMPLETE_ACK_INIT;
- }
- else
- {
- pAnInfo->State = AN_STATE_AN_ENABLE;
- }
- }
- else if(pAnInfo->AbilityMatch == AN_TRUE &&
- pAnInfo->RxConfig.AsUSHORT == 0)
- {
- pAnInfo->State = AN_STATE_AN_ENABLE;
- }
-
- break;
-
- case AN_STATE_COMPLETE_ACK_INIT:
- /* Make sure invalid bits are not set. */
- if(pAnInfo->RxConfig.bits.D0 || pAnInfo->RxConfig.bits.D1 ||
- pAnInfo->RxConfig.bits.D2 || pAnInfo->RxConfig.bits.D3 ||
- pAnInfo->RxConfig.bits.D4 || pAnInfo->RxConfig.bits.D9 ||
- pAnInfo->RxConfig.bits.D10 || pAnInfo->RxConfig.bits.D11)
- {
- AnRet = AUTONEG_STATUS_FAILED;
- break;
- }
-
- /* Set up the link partner advertisement register. */
- pAnInfo->mr_lp_adv_full_duplex = pAnInfo->RxConfig.D5_FD;
- pAnInfo->mr_lp_adv_half_duplex = pAnInfo->RxConfig.D6_HD;
- pAnInfo->mr_lp_adv_sym_pause = pAnInfo->RxConfig.D7_PS1;
- pAnInfo->mr_lp_adv_asym_pause = pAnInfo->RxConfig.D8_PS2;
- pAnInfo->mr_lp_adv_remote_fault1 = pAnInfo->RxConfig.D12_RF1;
- pAnInfo->mr_lp_adv_remote_fault2 = pAnInfo->RxConfig.D13_RF2;
- pAnInfo->mr_lp_adv_next_page = pAnInfo->RxConfig.D15_NP;
-
- pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
-
- pAnInfo->mr_toggle_tx = !pAnInfo->mr_toggle_tx;
- pAnInfo->mr_toggle_rx = pAnInfo->RxConfig.bits.D11;
- pAnInfo->mr_np_rx = pAnInfo->RxConfig.D15_NP;
- pAnInfo->mr_page_rx = AN_TRUE;
-
- pAnInfo->State = AN_STATE_COMPLETE_ACK;
- AnRet = AUTONEG_STATUS_TIMER_ENABLED;
-
- break;
-
- case AN_STATE_COMPLETE_ACK:
- if(pAnInfo->AbilityMatch == AN_TRUE &&
- pAnInfo->RxConfig.AsUSHORT == 0)
- {
- pAnInfo->State = AN_STATE_AN_ENABLE;
- break;
- }
-
- Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
-
- if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
- {
- if(pAnInfo->mr_adv_next_page == 0 ||
- pAnInfo->mr_lp_adv_next_page == 0)
- {
- pAnInfo->State = AN_STATE_IDLE_DETECT_INIT;
- }
- else
- {
- if(pAnInfo->TxConfig.bits.D15 == 0 &&
- pAnInfo->mr_np_rx == 0)
- {
- pAnInfo->State = AN_STATE_IDLE_DETECT_INIT;
- }
- else
- {
- AnRet = AUTONEG_STATUS_FAILED;
- }
- }
- }
-
- break;
-
- case AN_STATE_IDLE_DETECT_INIT:
- pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
-
- MM_AnTxIdle(pAnInfo);
-
- pAnInfo->State = AN_STATE_IDLE_DETECT;
-
- AnRet = AUTONEG_STATUS_TIMER_ENABLED;
-
- break;
-
- case AN_STATE_IDLE_DETECT:
- if(pAnInfo->AbilityMatch == AN_TRUE &&
- pAnInfo->RxConfig.AsUSHORT == 0)
- {
- pAnInfo->State = AN_STATE_AN_ENABLE;
- break;
- }
-
- Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
- if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
- {
-// if(pAnInfo->IdleMatch == AN_TRUE)
-// {
- pAnInfo->State = AN_STATE_LINK_OK;
-// }
-// else
-// {
-// AnRet = AUTONEG_STATUS_FAILED;
-// break;
-// }
- }
-
- break;
-
- case AN_STATE_LINK_OK:
- pAnInfo->mr_an_complete = AN_TRUE;
- pAnInfo->mr_link_ok = AN_TRUE;
- AnRet = AUTONEG_STATUS_DONE;
-
- break;
-
- case AN_STATE_NEXT_PAGE_WAIT_INIT:
- break;
-
- case AN_STATE_NEXT_PAGE_WAIT:
- break;
-
- default:
- AnRet = AUTONEG_STATUS_FAILED;
- break;
- }
-
- return AnRet;
-}
-#endif /* INCLUDE_TBI_SUPPORT */
-
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* History: */
-/******************************************************************************/
-
-
-#ifndef AUTONEG_H
-#define AUTONEG_H
-
-
-
-/******************************************************************************/
-/* Constants. */
-/******************************************************************************/
-
-#define AN_LINK_TIMER_INTERVAL_US 12000 /* 10ms */
-
-/* TRUE, FALSE */
-#define AN_TRUE 1
-#define AN_FALSE 0
-
-
-
-/******************************************************************************/
-/* Main data structure for keeping track of 802.3z auto-negotation state */
-/* variables as shown in Figure 37-6 of the IEEE 802.3z specification. */
-/******************************************************************************/
-
-typedef struct
-{
- /* Pointer to the operating system specific data structure. */
- void *pContext;
-
- /* Current auto-negotiation state. */
- unsigned long State;
- #define AN_STATE_UNKNOWN 0
- #define AN_STATE_AN_ENABLE 1
- #define AN_STATE_AN_RESTART_INIT 2
- #define AN_STATE_AN_RESTART 3
- #define AN_STATE_DISABLE_LINK_OK 4
- #define AN_STATE_ABILITY_DETECT_INIT 5
- #define AN_STATE_ABILITY_DETECT 6
- #define AN_STATE_ACK_DETECT_INIT 7
- #define AN_STATE_ACK_DETECT 8
- #define AN_STATE_COMPLETE_ACK_INIT 9
- #define AN_STATE_COMPLETE_ACK 10
- #define AN_STATE_IDLE_DETECT_INIT 11
- #define AN_STATE_IDLE_DETECT 12
- #define AN_STATE_LINK_OK 13
- #define AN_STATE_NEXT_PAGE_WAIT_INIT 14
- #define AN_STATE_NEXT_PAGE_WAIT 16
-
- /* Link timer. */
- unsigned long LinkTime_us;
-
- /* Current time. */
- unsigned long CurrentTime_us;
-
- /* Ability, idle, and ack match functions. */
- unsigned long AbilityMatchCnt;
-
- /* Need these values for consistency check. */
- unsigned short AbilityMatchCfg;
-
- unsigned short reserved;
-
- char AbilityMatch;
- char IdleMatch;
- char AckMatch;
- char reserved1;
-
- /* Tx config data */
- union
- {
- /* The TxConfig register is arranged as follows: */
- /* */
- /* MSB LSB */
- /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */
- /* | D7| D6| D5| D4| D3| D2| D1| D0|D15|D14|D13|D12|D11|D10| D9| D8| */
- /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */
- struct
- {
-#ifdef BIG_ENDIAN_HOST
- unsigned short D7:1; /* PS1 */
- unsigned short D6:1; /* HD */
- unsigned short D5:1; /* FD */
- unsigned short D4:1;
- unsigned short D3:1;
- unsigned short D2:1;
- unsigned short D1:1;
- unsigned short D0:1;
- unsigned short D15:1; /* NP */
- unsigned short D14:1; /* ACK */
- unsigned short D13:1; /* RF2 */
- unsigned short D12:1; /* RF1 */
- unsigned short D11:1;
- unsigned short D10:1;
- unsigned short D9:1;
- unsigned short D8:1; /* PS2 */
-#else /* BIG_ENDIAN_HOST */
- unsigned int D8:1; /* PS2 */
- unsigned int D9:1;
- unsigned int D10:1;
- unsigned int D11:1;
- unsigned int D12:1; /* RF1 */
- unsigned int D13:1; /* RF2 */
- unsigned int D14:1; /* ACK */
- unsigned int D15:1; /* NP */
- unsigned int D0:1;
- unsigned int D1:1;
- unsigned int D2:1;
- unsigned int D3:1;
- unsigned int D4:1;
- unsigned int D5:1; /* FD */
- unsigned int D6:1; /* HD */
- unsigned int D7:1; /* PS1 */
-#endif
- } bits;
-
- unsigned short AsUSHORT;
-
- #define D8_PS2 bits.D8
- #define D12_RF1 bits.D12
- #define D13_RF2 bits.D13
- #define D14_ACK bits.D14
- #define D15_NP bits.D15
- #define D5_FD bits.D5
- #define D6_HD bits.D6
- #define D7_PS1 bits.D7
- } TxConfig;
-
- /* Rx config data */
- union
- {
- /* The RxConfig register is arranged as follows: */
- /* */
- /* MSB LSB */
- /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */
- /* | D7| D6| D5| D4| D3| D2| D1| D0|D15|D14|D13|D12|D11|D10| D9| D8| */
- /* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ */
- struct
- {
-#ifdef BIG_ENDIAN_HOST
- unsigned short D7:1; /* PS1 */
- unsigned short D6:1; /* HD */
- unsigned short D5:1; /* FD */
- unsigned short D4:1;
- unsigned short D3:1;
- unsigned short D2:1;
- unsigned short D1:1;
- unsigned short D0:1;
- unsigned short D15:1; /* NP */
- unsigned short D14:1; /* ACK */
- unsigned short D13:1; /* RF2 */
- unsigned short D12:1; /* RF1 */
- unsigned short D11:1;
- unsigned short D10:1;
- unsigned short D9:1;
- unsigned short D8:1; /* PS2 */
-#else /* BIG_ENDIAN_HOST */
- unsigned int D8:1; /* PS2 */
- unsigned int D9:1;
- unsigned int D10:1;
- unsigned int D11:1;
- unsigned int D12:1; /* RF1 */
- unsigned int D13:1; /* RF2 */
- unsigned int D14:1; /* ACK */
- unsigned int D15:1; /* NP */
- unsigned int D0:1;
- unsigned int D1:1;
- unsigned int D2:1;
- unsigned int D3:1;
- unsigned int D4:1;
- unsigned int D5:1; /* FD */
- unsigned int D6:1; /* HD */
- unsigned int D7:1; /* PS1 */
-#endif
- } bits;
-
- unsigned short AsUSHORT;
- } RxConfig;
-
- #define AN_CONFIG_NP 0x0080
- #define AN_CONFIG_ACK 0x0040
- #define AN_CONFIG_RF2 0x0020
- #define AN_CONFIG_RF1 0x0010
- #define AN_CONFIG_PS2 0x0001
- #define AN_CONFIG_PS1 0x8000
- #define AN_CONFIG_HD 0x4000
- #define AN_CONFIG_FD 0x2000
-
-
- /* Management registers. */
-
- /* Control register. */
- union
- {
- struct
- {
- unsigned int an_enable:1;
- unsigned int loopback:1;
- unsigned int reset:1;
- unsigned int restart_an:1;
- } bits;
-
- unsigned short AsUSHORT;
-
- #define mr_an_enable Mr0.bits.an_enable
- #define mr_loopback Mr0.bits.loopback
- #define mr_main_reset Mr0.bits.reset
- #define mr_restart_an Mr0.bits.restart_an
- } Mr0;
-
- /* Status register. */
- union
- {
- struct
- {
- unsigned int an_complete:1;
- unsigned int link_ok:1;
- } bits;
-
- unsigned short AsUSHORT;
-
- #define mr_an_complete Mr1.bits.an_complete
- #define mr_link_ok Mr1.bits.link_ok
- } Mr1;
-
- /* Advertisement register. */
- union
- {
- struct
- {
- unsigned int reserved_4:5;
- unsigned int full_duplex:1;
- unsigned int half_duplex:1;
- unsigned int sym_pause:1;
- unsigned int asym_pause:1;
- unsigned int reserved_11:3;
- unsigned int remote_fault1:1;
- unsigned int remote_fault2:1;
- unsigned int reserved_14:1;
- unsigned int next_page:1;
- } bits;
-
- unsigned short AsUSHORT;
-
- #define mr_adv_full_duplex Mr4.bits.full_duplex
- #define mr_adv_half_duplex Mr4.bits.half_duplex
- #define mr_adv_sym_pause Mr4.bits.sym_pause
- #define mr_adv_asym_pause Mr4.bits.asym_pause
- #define mr_adv_remote_fault1 Mr4.bits.remote_fault1
- #define mr_adv_remote_fault2 Mr4.bits.remote_fault2
- #define mr_adv_next_page Mr4.bits.next_page
- } Mr4;
-
- /* Link partner advertisement register. */
- union
- {
- struct
- {
- unsigned int reserved_4:5;
- unsigned int lp_full_duplex:1;
- unsigned int lp_half_duplex:1;
- unsigned int lp_sym_pause:1;
- unsigned int lp_asym_pause:1;
- unsigned int reserved_11:3;
- unsigned int lp_remote_fault1:1;
- unsigned int lp_remote_fault2:1;
- unsigned int lp_ack:1;
- unsigned int lp_next_page:1;
- } bits;
-
- unsigned short AsUSHORT;
-
- #define mr_lp_adv_full_duplex Mr5.bits.lp_full_duplex
- #define mr_lp_adv_half_duplex Mr5.bits.lp_half_duplex
- #define mr_lp_adv_sym_pause Mr5.bits.lp_sym_pause
- #define mr_lp_adv_asym_pause Mr5.bits.lp_asym_pause
- #define mr_lp_adv_remote_fault1 Mr5.bits.lp_remote_fault1
- #define mr_lp_adv_remote_fault2 Mr5.bits.lp_remote_fault2
- #define mr_lp_adv_next_page Mr5.bits.lp_next_page
- } Mr5;
-
- /* Auto-negotiation expansion register. */
- union
- {
- struct
- {
- unsigned int reserved_0:1;
- unsigned int page_received:1;
- unsigned int next_pageable:1;
- unsigned int reserved_15:13;
- } bits;
-
- unsigned short AsUSHORT;
- } Mr6;
-
- /* Auto-negotiation next page transmit register. */
- union
- {
- struct
- {
- unsigned int code_field:11;
- unsigned int toggle:1;
- unsigned int ack2:1;
- unsigned int message_page:1;
- unsigned int reserved_14:1;
- unsigned int next_page:1;
- } bits;
-
- unsigned short AsUSHORT;
-
- #define mr_np_tx Mr7.AsUSHORT
- } Mr7;
-
- /* Auto-negotiation link partner ability register. */
- union
- {
- struct
- {
- unsigned int code_field:11;
- unsigned int toggle:1;
- unsigned int ack2:1;
- unsigned int message_page:1;
- unsigned int ack:1;
- unsigned int next_page:1;
- } bits;
-
- unsigned short AsUSHORT;
-
- #define mr_lp_np_rx Mr8.AsUSHORT
- } Mr8;
-
- /* Extended status register. */
- union
- {
- struct
- {
- unsigned int reserved_11:12;
- unsigned int base1000_t_hd:1;
- unsigned int base1000_t_fd:1;
- unsigned int base1000_x_hd:1;
- unsigned int base1000_x_fd:1;
- } bits;
-
- unsigned short AsUSHORT;
- } Mr15;
-
- /* Miscellaneous state variables. */
- union
- {
- struct
- {
- unsigned int toggle_tx:1;
- unsigned int toggle_rx:1;
- unsigned int np_rx:1;
- unsigned int page_rx:1;
- unsigned int np_loaded:1;
- } bits;
-
- unsigned short AsUSHORT;
-
- #define mr_toggle_tx MrMisc.bits.toggle_tx
- #define mr_toggle_rx MrMisc.bits.toggle_rx
- #define mr_np_rx MrMisc.bits.np_rx
- #define mr_page_rx MrMisc.bits.page_rx
- #define mr_np_loaded MrMisc.bits.np_loaded
- } MrMisc;
-
-} AN_STATE_INFO, *PAN_STATE_INFO;
-
-
-
-/******************************************************************************/
-/* Return code of Autoneg8023z. */
-/******************************************************************************/
-
-typedef enum
-{
- AUTONEG_STATUS_OK = 0,
- AUTONEG_STATUS_DONE = 1,
- AUTONEG_STATUS_TIMER_ENABLED = 2,
-// AUTONEG_STATUS_FAILED = 0xffffffff,
- AUTONEG_STATUS_FAILED = 0xfffffff
-} AUTONEG_STATUS, *PAUTONEG_STATUS;
-
-
-
-/******************************************************************************/
-/* Function prototypes. */
-/******************************************************************************/
-
-AUTONEG_STATUS Autoneg8023z(PAN_STATE_INFO pAnInfo);
-void AutonegInit(PAN_STATE_INFO pAnInfo);
-
-
-
-/******************************************************************************/
-/* The following functions are defined in the os-dependent module. */
-/******************************************************************************/
-
-void MM_AnTxConfig(PAN_STATE_INFO pAnInfo);
-void MM_AnTxIdle(PAN_STATE_INFO pAnInfo);
-char MM_AnRxConfig(PAN_STATE_INFO pAnInfo, unsigned short *pRxConfig);
-
-
-
-#endif /* AUTONEG_H */
-
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2005 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/******************************************************************************/
-
-
-char bcm5700_driver[] = "bcm57xx";
-char bcm5700_version[] = "8.3.14";
-char bcm5700_date[] = "(11/2/05)";
-
-#define B57UM
-#include "mm.h"
-#include "linux/mii.h" //@.@jack add it 2006/06/28.
-#include "typedefs.h"
-#include "osl.h"
-#include "bcmdefs.h"
-#include "bcmdevs.h"
-#include "sbconfig.h"
-#include "sbutils.h"
-#include "hndgige.h"
-#include "bcmrobo.h"
-#include "robo_register.c"
-
-#include "bcmendian.h"
-#include "bcmnvram.h"
-#include "proto/ethernet.h"
-#include "proto/vlan.h"
-#include "proto/bcmtcp.h"
-#include "proto/bcmip.h"
-#define PKTDATA(osh, skb) (((struct sk_buff*)(skb))->data)
-
-/* this is needed to get good and stable performances */
-#define EXTRA_HDR BCMEXTRAHDROOM
-
-#define SIOCGREG_STATUS 0x8996 /* Read Switch register (for debug)*/
-#define SIOCSREG_STATUS 0x8997 /* Write Switch register(for debug)*/
-
-/* This structure is used in SIOCXREG_STATUS ioctl calls*/
-struct reg_ioctl_data {
- u16 page_num;
- u16 addr_num;
- u16 len;
- u16 val_in[4];
- u16 val_out[4];
-};
-
-/* A few user-configurable values. */
-
-#define MAX_UNITS 16
-/* Used to pass the full-duplex flag, etc. */
-static int line_speed[MAX_UNITS] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-static int auto_speed[MAX_UNITS] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};
-static int full_duplex[MAX_UNITS] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};
-static int rx_flow_control[MAX_UNITS] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};
-static int tx_flow_control[MAX_UNITS] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};
-static int auto_flow_control[MAX_UNITS] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-static int mtu[MAX_UNITS] = {1500,1500,1500,1500,1500,1500,1500,1500,1500,1500,1500,1500,1500,1500,1500,1500}; /* Jumbo MTU for interfaces. */
-#endif
-static int tx_checksum[MAX_UNITS] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};
-static int rx_checksum[MAX_UNITS] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};
-static int scatter_gather[MAX_UNITS] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};
-static int activate_gpio = -1;
-
-#define TX_DESC_CNT DEFAULT_TX_PACKET_DESC_COUNT
-static unsigned int tx_pkt_desc_cnt[MAX_UNITS] =
- {TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT,
- TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT,
- TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT,TX_DESC_CNT,
- TX_DESC_CNT};
-
-#define RX_DESC_CNT DEFAULT_STD_RCV_DESC_COUNT
-static unsigned int rx_std_desc_cnt[MAX_UNITS] =
- {RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,
- RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,
- RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,RX_DESC_CNT,
- RX_DESC_CNT };
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-#define JBO_DESC_CNT DEFAULT_JUMBO_RCV_DESC_COUNT
-static unsigned int rx_jumbo_desc_cnt[MAX_UNITS] =
- {JBO_DESC_CNT,JBO_DESC_CNT,JBO_DESC_CNT,JBO_DESC_CNT,JBO_DESC_CNT,
- JBO_DESC_CNT,JBO_DESC_CNT,JBO_DESC_CNT,JBO_DESC_CNT,JBO_DESC_CNT,
- JBO_DESC_CNT,JBO_DESC_CNT,JBO_DESC_CNT,JBO_DESC_CNT,JBO_DESC_CNT,
- JBO_DESC_CNT };
-#endif
-
-#ifdef BCM_INT_COAL
-#ifdef BCM_NAPI_RXPOLL
-static unsigned int adaptive_coalesce[MAX_UNITS] =
- {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-#else
-static unsigned int adaptive_coalesce[MAX_UNITS] =
- {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};
-#endif
-
-#define RX_COAL_TK DEFAULT_RX_COALESCING_TICKS
-static unsigned int rx_coalesce_ticks[MAX_UNITS] =
- {RX_COAL_TK,RX_COAL_TK,RX_COAL_TK,RX_COAL_TK,RX_COAL_TK,
- RX_COAL_TK, RX_COAL_TK,RX_COAL_TK,RX_COAL_TK,RX_COAL_TK,
- RX_COAL_TK,RX_COAL_TK, RX_COAL_TK,RX_COAL_TK,RX_COAL_TK,
- RX_COAL_TK};
-
-#define RX_COAL_FM DEFAULT_RX_MAX_COALESCED_FRAMES
-static unsigned int rx_max_coalesce_frames[MAX_UNITS] =
- {RX_COAL_FM,RX_COAL_FM,RX_COAL_FM,RX_COAL_FM,RX_COAL_FM,
- RX_COAL_FM,RX_COAL_FM,RX_COAL_FM,RX_COAL_FM,RX_COAL_FM,
- RX_COAL_FM,RX_COAL_FM,RX_COAL_FM,RX_COAL_FM,RX_COAL_FM,
- RX_COAL_FM};
-
-#define TX_COAL_TK DEFAULT_TX_COALESCING_TICKS
-static unsigned int tx_coalesce_ticks[MAX_UNITS] =
- {TX_COAL_TK,TX_COAL_TK,TX_COAL_TK,TX_COAL_TK,TX_COAL_TK,
- TX_COAL_TK, TX_COAL_TK,TX_COAL_TK,TX_COAL_TK,TX_COAL_TK,
- TX_COAL_TK,TX_COAL_TK, TX_COAL_TK,TX_COAL_TK,TX_COAL_TK,
- TX_COAL_TK};
-
-#define TX_COAL_FM DEFAULT_TX_MAX_COALESCED_FRAMES
-static unsigned int tx_max_coalesce_frames[MAX_UNITS] =
- {TX_COAL_FM,TX_COAL_FM,TX_COAL_FM,TX_COAL_FM,TX_COAL_FM,
- TX_COAL_FM,TX_COAL_FM,TX_COAL_FM,TX_COAL_FM,TX_COAL_FM,
- TX_COAL_FM,TX_COAL_FM,TX_COAL_FM,TX_COAL_FM,TX_COAL_FM,
- TX_COAL_FM};
-
-#define ST_COAL_TK DEFAULT_STATS_COALESCING_TICKS
-static unsigned int stats_coalesce_ticks[MAX_UNITS] =
- {ST_COAL_TK,ST_COAL_TK,ST_COAL_TK,ST_COAL_TK,ST_COAL_TK,
- ST_COAL_TK,ST_COAL_TK,ST_COAL_TK,ST_COAL_TK,ST_COAL_TK,
- ST_COAL_TK,ST_COAL_TK,ST_COAL_TK,ST_COAL_TK,ST_COAL_TK,
- ST_COAL_TK,};
-
-#endif
-#ifdef BCM_WOL
-static int enable_wol[MAX_UNITS] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-#endif
-#ifdef BCM_TSO
-static int enable_tso[MAX_UNITS] = {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1};
-#endif
-#ifdef BCM_NIC_SEND_BD
-static int nic_tx_bd[MAX_UNITS] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-#endif
-#ifdef BCM_ASF
-static int vlan_tag_mode[MAX_UNITS] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-#endif
-static int delay_link[MAX_UNITS] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-static int disable_d3hot[MAX_UNITS] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_PCI_USE_VECTOR)
-static int disable_msi[MAX_UNITS] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
-static int bcm_msi_chipset_bug = 0;
-#endif
-
-#define BCM_TIMER_GRANULARITY (1000000 / HZ)
-
-/* Hack to hook the data path to the BCM WL dirver */
-#ifdef BCM_WL_EMULATOR
-#include "bcmnvram.h"
-#include "wl_bcm57emu.h"
-#ifdef SKB_MANAGER
-int skb_old_alloc = 0;
-#endif
-#endif /* BCM_WL_EMULATOR */
-
-/* Operational parameters that usually are not changed. */
-/* Time in jiffies before concluding the transmitter is hung. */
-#define TX_TIMEOUT (2*HZ)
-
-#if (LINUX_VERSION_CODE < 0x02030d)
-#define pci_resource_start(dev, bar) (dev->base_address[bar] & PCI_BASE_ADDRESS_MEM_MASK)
-#elif (LINUX_VERSION_CODE < 0x02032b)
-#define pci_resource_start(dev, bar) (dev->resource[bar] & PCI_BASE_ADDRESS_MEM_MASK)
-#endif
-
-#if (LINUX_VERSION_CODE < 0x02032b)
-#define dev_kfree_skb_irq(skb) dev_kfree_skb(skb)
-#define netif_wake_queue(dev) clear_bit(0, &dev->tbusy); mark_bh(NET_BH)
-#define netif_stop_queue(dev) set_bit(0, &dev->tbusy)
-
-static inline void netif_start_queue(struct net_device *dev)
-{
- dev->tbusy = 0;
- dev->interrupt = 0;
- dev->start = 1;
-}
-
-#define netif_queue_stopped(dev) dev->tbusy
-#define netif_running(dev) dev->start
-
-static inline void tasklet_schedule(struct tasklet_struct *tasklet)
-{
- queue_task(tasklet, &tq_immediate);
- mark_bh(IMMEDIATE_BH);
-}
-
-static inline void tasklet_init(struct tasklet_struct *tasklet,
- void (*func)(unsigned long),
- unsigned long data)
-{
- tasklet->next = NULL;
- tasklet->sync = 0;
- tasklet->routine = (void (*)(void *))func;
- tasklet->data = (void *)data;
-}
-
-#define tasklet_kill(tasklet)
-
-#endif
-
-#if (LINUX_VERSION_CODE < 0x020300)
-struct pci_device_id {
- unsigned int vendor, device; /* Vendor and device ID or PCI_ANY_ID */
- unsigned int subvendor, subdevice; /* Subsystem ID's or PCI_ANY_ID */
- unsigned int class, class_mask; /* (class,subclass,prog-if) triplet */
- unsigned long driver_data; /* Data private to the driver */
-};
-
-#define PCI_ANY_ID 0
-
-#define pci_set_drvdata(pdev, dev)
-#define pci_get_drvdata(pdev) 0
-
-#define pci_enable_device(pdev) 0
-
-#define __devinit __init
-#define __devinitdata __initdata
-#define __devexit
-
-#define SET_MODULE_OWNER(dev)
-#define MODULE_DEVICE_TABLE(pci, pci_tbl)
-
-#endif
-
-#if (LINUX_VERSION_CODE < 0x020411)
-#ifndef __devexit_p
-#define __devexit_p(x) x
-#endif
-#endif
-
-#ifndef MODULE_LICENSE
-#define MODULE_LICENSE(license)
-#endif
-
-#ifndef IRQ_RETVAL
-typedef void irqreturn_t;
-#define IRQ_RETVAL(x)
-#endif
-
-#if (LINUX_VERSION_CODE < 0x02032a)
-static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size,
- dma_addr_t *dma_handle)
-{
- void *virt_ptr;
-
- /* Maximum in slab.c */
- if (size > 131072)
- return 0;
-
- virt_ptr = kmalloc(size, GFP_KERNEL);
- *dma_handle = virt_to_bus(virt_ptr);
- return virt_ptr;
-}
-#define pci_free_consistent(dev, size, ptr, dma_ptr) kfree(ptr)
-
-#endif /*#if (LINUX_VERSION_CODE < 0x02032a) */
-
-
-#if (LINUX_VERSION_CODE < 0x02040d)
-
-#if (LINUX_VERSION_CODE >= 0x020409) && defined(RED_HAT_LINUX_KERNEL)
-
-#define BCM_32BIT_DMA_MASK ((u64) 0x00000000ffffffffULL)
-#define BCM_64BIT_DMA_MASK ((u64) 0xffffffffffffffffULL)
-
-#else
-/* pci_set_dma_mask is using dma_addr_t */
-
-#define BCM_32BIT_DMA_MASK ((dma_addr_t) 0xffffffff)
-#define BCM_64BIT_DMA_MASK ((dma_addr_t) 0xffffffff)
-
-#endif
-
-#else /* (LINUX_VERSION_CODE < 0x02040d) */
-
-#define BCM_32BIT_DMA_MASK ((u64) 0x00000000ffffffffULL)
-#define BCM_64BIT_DMA_MASK ((u64) 0xffffffffffffffffULL)
-#endif
-
-#if (LINUX_VERSION_CODE < 0x020329)
-#define pci_set_dma_mask(pdev, mask) (0)
-#else
-#if (LINUX_VERSION_CODE < 0x020403)
-int
-pci_set_dma_mask(struct pci_dev *dev, dma_addr_t mask)
-{
- if(! pci_dma_supported(dev, mask))
- return -EIO;
-
- dev->dma_mask = mask;
-
- return 0;
-}
-#endif
-#endif
-
-#if (LINUX_VERSION_CODE < 0x020547)
-#define pci_set_consistent_dma_mask(pdev, mask) (0)
-#endif
-
-#if (LINUX_VERSION_CODE < 0x020402)
-#define pci_request_regions(pdev, name) (0)
-#define pci_release_regions(pdev)
-#endif
-
-#if !defined(spin_is_locked)
-#define spin_is_locked(lock) (test_bit(0,(lock)))
-#endif
-
-#define BCM5700_LOCK(pUmDevice, flags) \
- if ((pUmDevice)->do_global_lock) { \
- spin_lock_irqsave(&(pUmDevice)->global_lock, flags); \
- }
-
-#define BCM5700_UNLOCK(pUmDevice, flags) \
- if ((pUmDevice)->do_global_lock) { \
- spin_unlock_irqrestore(&(pUmDevice)->global_lock, flags);\
- }
-
-inline void
-bcm5700_intr_lock(PUM_DEVICE_BLOCK pUmDevice)
-{
- if (pUmDevice->do_global_lock) {
- spin_lock(&pUmDevice->global_lock);
- }
-}
-
-inline void
-bcm5700_intr_unlock(PUM_DEVICE_BLOCK pUmDevice)
-{
- if (pUmDevice->do_global_lock) {
- spin_unlock(&pUmDevice->global_lock);
- }
-}
-
-void
-bcm5700_intr_off(PUM_DEVICE_BLOCK pUmDevice)
-{
- atomic_inc(&pUmDevice->intr_sem);
- LM_DisableInterrupt(&pUmDevice->lm_dev);
-#if (LINUX_VERSION_CODE >= 0x2051c)
- synchronize_irq(pUmDevice->dev->irq);
-#else
- synchronize_irq();
-#endif
- LM_DisableInterrupt(&pUmDevice->lm_dev);
-}
-
-void
-bcm5700_intr_on(PUM_DEVICE_BLOCK pUmDevice)
-{
- if (atomic_dec_and_test(&pUmDevice->intr_sem)) {
- LM_EnableInterrupt(&pUmDevice->lm_dev);
- }
-}
-
-
-int MM_Packet_Desc_Size = sizeof(UM_PACKET);
-
-#if defined(MODULE)
-MODULE_AUTHOR("Michael Chan <mchan at broadcom dot com> and Gary Zambrano <zambrano at broadcom dot com>");
-MODULE_DESCRIPTION("BCM5700 Driver");
-MODULE_LICENSE("GPL");
-
-#if (LINUX_VERSION_CODE < 0x020605)
-
-MODULE_PARM(debug, "i");
-MODULE_PARM(msglevel, "i");
-MODULE_PARM(activate_gpio, "0-15i");
-MODULE_PARM(line_speed, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(auto_speed, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(full_duplex, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(rx_flow_control, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(tx_flow_control, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(auto_flow_control, "1-" __MODULE_STRING(MAX_UNITS) "i");
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-MODULE_PARM(mtu, "1-" __MODULE_STRING(MAX_UNITS) "i");
-#endif
-MODULE_PARM(tx_checksum, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(rx_checksum, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(scatter_gather, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(tx_pkt_desc_cnt, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(rx_std_desc_cnt, "1-" __MODULE_STRING(MAX_UNITS) "i");
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-MODULE_PARM(rx_jumbo_desc_cnt, "1-" __MODULE_STRING(MAX_UNITS) "i");
-#endif
-#ifdef BCM_INT_COAL
-MODULE_PARM(adaptive_coalesce, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(rx_coalesce_ticks, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(rx_max_coalesce_frames, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(tx_coalesce_ticks, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(tx_max_coalesce_frames, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(stats_coalesce_ticks, "1-" __MODULE_STRING(MAX_UNITS) "i");
-#endif
-#ifdef BCM_WOL
-MODULE_PARM(enable_wol, "1-" __MODULE_STRING(MAX_UNITS) "i");
-#endif
-#ifdef BCM_TSO
-MODULE_PARM(enable_tso, "1-" __MODULE_STRING(MAX_UNITS) "i");
-#endif
-#ifdef BCM_NIC_SEND_BD
-MODULE_PARM(nic_tx_bd, "1-" __MODULE_STRING(MAX_UNITS) "i");
-#endif
-#ifdef BCM_ASF
-MODULE_PARM(vlan_tag_mode, "1-" __MODULE_STRING(MAX_UNITS) "i");
-#endif
-MODULE_PARM(delay_link, "1-" __MODULE_STRING(MAX_UNITS) "i");
-MODULE_PARM(disable_d3hot, "1-" __MODULE_STRING(MAX_UNITS) "i");
-
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_PCI_USE_VECTOR)
-MODULE_PARM(disable_msi, "1-" __MODULE_STRING(MAX_UNITS) "i");
-#endif
-
-#else /* parms*/
-
-#if (LINUX_VERSION_CODE >= 0x020605) && (LINUX_VERSION_CODE < 0x02060a)
-
-static int var;
-
-#define numvar var
-
-#endif
-
-#if (LINUX_VERSION_CODE >= 0x2060a)
-
-#define numvar NULL
-
-#endif
-
-module_param_array(line_speed, int, numvar, 0);
-module_param_array(auto_speed, int, numvar, 0);
-module_param_array(full_duplex, int, numvar, 0);
-module_param_array(rx_flow_control, int, numvar, 0);
-module_param_array(tx_flow_control, int, numvar, 0);
-module_param_array(auto_flow_control, int, numvar, 0);
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-module_param_array(mtu, int, numvar, 0);
-#endif
-module_param_array(tx_checksum, int, numvar, 0);
-module_param_array(rx_checksum, int, numvar, 0);
-module_param_array(scatter_gather, int, numvar, 0);
-module_param_array(tx_pkt_desc_cnt, int, numvar, 0);
-module_param_array(rx_std_desc_cnt, int, numvar, 0);
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-module_param_array(rx_jumbo_desc_cnt, int, numvar, 0);
-#endif
-#ifdef BCM_INT_COAL
-module_param_array(adaptive_coalesce, int, numvar, 0);
-module_param_array(rx_coalesce_ticks, int, numvar, 0);
-module_param_array(rx_max_coalesce_frames, int, numvar, 0);
-module_param_array(tx_coalesce_ticks, int, numvar, 0);
-module_param_array(tx_max_coalesce_frames, int, numvar, 0);
-module_param_array(stats_coalesce_ticks, int, numvar, 0);
-#endif
-#ifdef BCM_WOL
-module_param_array(enable_wol, int, numvar, 0);
-#endif
-#ifdef BCM_TSO
-module_param_array(enable_tso, int, numvar, 0);
-#endif
-#ifdef BCM_NIC_SEND_BD
-module_param_array(nic_tx_bd, int, numvar, 0);
-#endif
-#ifdef BCM_ASF
-module_param_array(vlan_tag_mode, int, numvar, 0);
-#endif
-module_param_array(delay_link, int, numvar, 0);
-module_param_array(disable_d3hot, int, numvar, 0);
-
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_PCI_USE_VECTOR)
-module_param_array(disable_msi, int, numvar, 0);
-#endif
-
-
-#endif /* params */
-
-
-#endif
-
-#define RUN_AT(x) (jiffies + (x))
-
-char kernel_version[] = UTS_RELEASE;
-
-#define PCI_SUPPORT_VER2
-
-#if !defined(CAP_NET_ADMIN)
-#define capable(CAP_XXX) (suser())
-#endif
-
-#define tigon3_debug debug
-#if TIGON3_DEBUG
-static int tigon3_debug = TIGON3_DEBUG;
-#else
-static int tigon3_debug = 0;
-#endif
-static int msglevel = 0xdeadbeef;
-int b57_msg_level;
-
-int bcm5700_open(struct net_device *dev);
-STATIC void bcm5700_timer(unsigned long data);
-STATIC void bcm5700_stats_timer(unsigned long data);
-STATIC void bcm5700_reset(struct net_device *dev);
-STATIC int bcm5700_start_xmit(struct sk_buff *skb, struct net_device *dev);
-STATIC irqreturn_t bcm5700_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
-#ifdef BCM_TASKLET
-STATIC void bcm5700_tasklet(unsigned long data);
-#endif
-STATIC int bcm5700_close(struct net_device *dev);
-STATIC struct net_device_stats *bcm5700_get_stats(struct net_device *dev);
-STATIC int bcm5700_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-STATIC void bcm5700_do_rx_mode(struct net_device *dev);
-STATIC void bcm5700_set_rx_mode(struct net_device *dev);
-STATIC int bcm5700_set_mac_addr(struct net_device *dev, void *p);
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-STATIC int bcm5700_change_mtu(struct net_device *dev, int new_mtu);
-#endif
-#ifdef BCM_NAPI_RXPOLL
-STATIC int bcm5700_poll(struct net_device *dev, int *budget);
-#endif
-STATIC int replenish_rx_buffers(PUM_DEVICE_BLOCK pUmDevice, int max);
-STATIC int bcm5700_freemem(struct net_device *dev);
-#ifdef BCM_INT_COAL
-#ifndef BCM_NAPI_RXPOLL
-STATIC int bcm5700_adapt_coalesce(PUM_DEVICE_BLOCK pUmDevice);
-#endif
-#endif
-STATIC void bcm5700_set_vlan_mode(UM_DEVICE_BLOCK *pUmDevice);
-STATIC int bcm5700_init_counters(PUM_DEVICE_BLOCK pUmDevice);
-#ifdef BCM_VLAN
-STATIC void bcm5700_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp);
-STATIC void bcm5700_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid);
-#endif
-void bcm5700_shutdown(UM_DEVICE_BLOCK *pUmDevice);
-void bcm5700_free_remaining_rx_bufs(UM_DEVICE_BLOCK *pUmDevice);
-void bcm5700_validate_param_range(UM_DEVICE_BLOCK *pUmDevice, int *param,
- char *param_name, int min, int max, int deflt);
-
-static int bcm5700_notify_reboot(struct notifier_block *this, unsigned long event, void *unused);
-static struct notifier_block bcm5700_reboot_notifier = {
- bcm5700_notify_reboot,
- NULL,
- 0
-};
-
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
-STATIC void poll_bcm5700(struct net_device *dev);
-#endif
-
-/* A list of all installed bcm5700 devices. */
-static struct net_device *root_tigon3_dev = NULL;
-
-#if defined(CONFIG_SPARC64) || defined(CONFIG_X86_64) ||defined(CONFIG_PPC64)
-
-#endif
-
-typedef enum {
- BCM5700A6 = 0,
- BCM5700T6,
- BCM5700A9,
- BCM5700T9,
- BCM5700,
- BCM5701A5,
- BCM5701T1,
- BCM5701T8,
- BCM5701A7,
- BCM5701A10,
- BCM5701A12,
- BCM5701,
- BCM5702,
- BCM5703,
- BCM5703A31,
- BCM5703ARBUCKLE,
- TC996T,
- TC996ST,
- TC996SSX,
- TC996SX,
- TC996BT,
- TC997T,
- TC997SX,
- TC1000T,
- TC1000BT,
- TC940BR01,
- TC942BR01,
- TC998T,
- TC998SX,
- TC999T,
- NC6770,
- NC1020,
- NC150T,
- NC7760,
- NC7761,
- NC7770,
- NC7771,
- NC7780,
- NC7781,
- NC7772,
- NC7782,
- NC7783,
- NC320T,
- NC320I,
- NC325I,
- NC324I,
- NC326I,
- BCM5704CIOBE,
- BCM5704,
- BCM5704S,
- BCM5705,
- BCM5705M,
- BCM5705F,
- BCM5901,
- BCM5782,
- BCM5788,
- BCM5789,
- BCM5750,
- BCM5750M,
- BCM5720,
- BCM5751,
- BCM5751M,
- BCM5751F,
- BCM5721,
- BCM5753,
- BCM5753M,
- BCM5753F,
- BCM5781,
- BCM5752,
- BCM5752M,
- BCM5714,
- BCM5780,
- BCM5780S,
- BCM5715,
- BCM4785,
- BCM5903M,
- UNK5788
-} board_t;
-
-
-/* indexed by board_t, above */
-static struct {
- char *name;
-} board_info[] __devinitdata = {
- { "Broadcom BCM5700 1000Base-T" },
- { "Broadcom BCM5700 1000Base-SX" },
- { "Broadcom BCM5700 1000Base-SX" },
- { "Broadcom BCM5700 1000Base-T" },
- { "Broadcom BCM5700" },
- { "Broadcom BCM5701 1000Base-T" },
- { "Broadcom BCM5701 1000Base-T" },
- { "Broadcom BCM5701 1000Base-T" },
- { "Broadcom BCM5701 1000Base-SX" },
- { "Broadcom BCM5701 1000Base-T" },
- { "Broadcom BCM5701 1000Base-T" },
- { "Broadcom BCM5701" },
- { "Broadcom BCM5702 1000Base-T" },
- { "Broadcom BCM5703 1000Base-T" },
- { "Broadcom BCM5703 1000Base-SX" },
- { "Broadcom B5703 1000Base-SX" },
- { "3Com 3C996 10/100/1000 Server NIC" },
- { "3Com 3C996 10/100/1000 Server NIC" },
- { "3Com 3C996 Gigabit Fiber-SX Server NIC" },
- { "3Com 3C996 Gigabit Fiber-SX Server NIC" },
- { "3Com 3C996B Gigabit Server NIC" },
- { "3Com 3C997 Gigabit Server NIC" },
- { "3Com 3C997 Gigabit Fiber-SX Server NIC" },
- { "3Com 3C1000 Gigabit NIC" },
- { "3Com 3C1000B-T 10/100/1000 PCI" },
- { "3Com 3C940 Gigabit LOM (21X21)" },
- { "3Com 3C942 Gigabit LOM (31X31)" },
- { "3Com 3C998-T Dual Port 10/100/1000 PCI-X Server NIC" },
- { "3Com 3C998-SX Dual Port 1000-SX PCI-X Server NIC" },
- { "3Com 3C999-T Quad Port 10/100/1000 PCI-X Server NIC" },
- { "HP NC6770 Gigabit Server Adapter" },
- { "NC1020 HP ProLiant Gigabit Server Adapter 32 PCI" },
- { "HP ProLiant NC 150T PCI 4-port Gigabit Combo Switch Adapter" },
- { "HP NC7760 Gigabit Server Adapter" },
- { "HP NC7761 Gigabit Server Adapter" },
- { "HP NC7770 Gigabit Server Adapter" },
- { "HP NC7771 Gigabit Server Adapter" },
- { "HP NC7780 Gigabit Server Adapter" },
- { "HP NC7781 Gigabit Server Adapter" },
- { "HP NC7772 Gigabit Server Adapter" },
- { "HP NC7782 Gigabit Server Adapter" },
- { "HP NC7783 Gigabit Server Adapter" },
- { "HP ProLiant NC 320T PCI Express Gigabit Server Adapter" },
- { "HP ProLiant NC 320i PCI Express Gigabit Server Adapter" },
- { "HP NC325i Integrated Dual Port PCI Express Gigabit Server Adapter" },
- { "HP NC324i Integrated Dual Port PCI Express Gigabit Server Adapter" },
- { "HP NC326i Integrated Dual Port PCI Express Gigabit Server Adapter" },
- { "Broadcom BCM5704 CIOB-E 1000Base-T" },
- { "Broadcom BCM5704 1000Base-T" },
- { "Broadcom BCM5704 1000Base-SX" },
- { "Broadcom BCM5705 1000Base-T" },
- { "Broadcom BCM5705M 1000Base-T" },
- { "Broadcom 570x 10/100 Integrated Controller" },
- { "Broadcom BCM5901 100Base-TX" },
- { "Broadcom NetXtreme Gigabit Ethernet for hp" },
- { "Broadcom BCM5788 NetLink 1000Base-T" },
- { "Broadcom BCM5789 NetLink 1000Base-T PCI Express" },
- { "Broadcom BCM5750 1000Base-T PCI" },
- { "Broadcom BCM5750M 1000Base-T PCI" },
- { "Broadcom BCM5720 1000Base-T PCI" },
- { "Broadcom BCM5751 1000Base-T PCI Express" },
- { "Broadcom BCM5751M 1000Base-T PCI Express" },
- { "Broadcom BCM5751F 100Base-TX PCI Express" },
- { "Broadcom BCM5721 1000Base-T PCI Express" },
- { "Broadcom BCM5753 1000Base-T PCI Express" },
- { "Broadcom BCM5753M 1000Base-T PCI Express" },
- { "Broadcom BCM5753F 100Base-TX PCI Express" },
- { "Broadcom BCM5781 NetLink 1000Base-T PCI Express" },
- { "Broadcom BCM5752 1000Base-T PCI Express" },
- { "Broadcom BCM5752M 1000Base-T PCI Express" },
- { "Broadcom BCM5714 1000Base-T " },
- { "Broadcom BCM5780 1000Base-T" },
- { "Broadcom BCM5780S 1000Base-SX" },
- { "Broadcom BCM5715 1000Base-T " },
- { "Broadcom BCM4785 10/100/1000 Integrated Controller" },
- { "Broadcom BCM5903M Gigabit Ethernet " },
- { "Unknown BCM5788 Gigabit Ethernet " },
- { 0 }
- };
-
-static struct pci_device_id bcm5700_pci_tbl[] __devinitdata = {
- {0x14e4, 0x1644, 0x14e4, 0x1644, 0, 0, BCM5700A6 },
- {0x14e4, 0x1644, 0x14e4, 0x2, 0, 0, BCM5700T6 },
- {0x14e4, 0x1644, 0x14e4, 0x3, 0, 0, BCM5700A9 },
- {0x14e4, 0x1644, 0x14e4, 0x4, 0, 0, BCM5700T9 },
- {0x14e4, 0x1644, 0x1028, 0xd1, 0, 0, BCM5700 },
- {0x14e4, 0x1644, 0x1028, 0x0106, 0, 0, BCM5700 },
- {0x14e4, 0x1644, 0x1028, 0x0109, 0, 0, BCM5700 },
- {0x14e4, 0x1644, 0x1028, 0x010a, 0, 0, BCM5700 },
- {0x14e4, 0x1644, 0x10b7, 0x1000, 0, 0, TC996T },
- {0x14e4, 0x1644, 0x10b7, 0x1001, 0, 0, TC996ST },
- {0x14e4, 0x1644, 0x10b7, 0x1002, 0, 0, TC996SSX },
- {0x14e4, 0x1644, 0x10b7, 0x1003, 0, 0, TC997T },
- {0x14e4, 0x1644, 0x10b7, 0x1005, 0, 0, TC997SX },
- {0x14e4, 0x1644, 0x10b7, 0x1008, 0, 0, TC942BR01 },
- {0x14e4, 0x1644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5700 },
- {0x14e4, 0x1645, 0x14e4, 1, 0, 0, BCM5701A5 },
- {0x14e4, 0x1645, 0x14e4, 5, 0, 0, BCM5701T1 },
- {0x14e4, 0x1645, 0x14e4, 6, 0, 0, BCM5701T8 },
- {0x14e4, 0x1645, 0x14e4, 7, 0, 0, BCM5701A7 },
- {0x14e4, 0x1645, 0x14e4, 8, 0, 0, BCM5701A10 },
- {0x14e4, 0x1645, 0x14e4, 0x8008, 0, 0, BCM5701A12 },
- {0x14e4, 0x1645, 0x0e11, 0xc1, 0, 0, NC6770 },
- {0x14e4, 0x1645, 0x0e11, 0x7c, 0, 0, NC7770 },
- {0x14e4, 0x1645, 0x0e11, 0x85, 0, 0, NC7780 },
- {0x14e4, 0x1645, 0x1028, 0x0121, 0, 0, BCM5701 },
- {0x14e4, 0x1645, 0x10b7, 0x1004, 0, 0, TC996SX },
- {0x14e4, 0x1645, 0x10b7, 0x1006, 0, 0, TC996BT },
- {0x14e4, 0x1645, 0x10b7, 0x1007, 0, 0, TC1000T },
- {0x14e4, 0x1645, 0x10b7, 0x1008, 0, 0, TC940BR01 },
- {0x14e4, 0x1645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5701 },
- {0x14e4, 0x1646, 0x14e4, 0x8009, 0, 0, BCM5702 },
- {0x14e4, 0x1646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 },
- {0x14e4, 0x16a6, 0x14e4, 0x8009, 0, 0, BCM5702 },
- {0x14e4, 0x16a6, 0x14e4, 0x000c, 0, 0, BCM5702 },
- {0x14e4, 0x16a6, 0x0e11, 0xbb, 0, 0, NC7760 },
- {0x14e4, 0x16a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 },
- {0x14e4, 0x16c6, 0x10b7, 0x1100, 0, 0, TC1000BT },
- {0x14e4, 0x16c6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702 },
- {0x14e4, 0x1647, 0x14e4, 0x0009, 0, 0, BCM5703 },
- {0x14e4, 0x1647, 0x14e4, 0x000a, 0, 0, BCM5703A31 },
- {0x14e4, 0x1647, 0x14e4, 0x000b, 0, 0, BCM5703 },
- {0x14e4, 0x1647, 0x14e4, 0x800a, 0, 0, BCM5703 },
- {0x14e4, 0x1647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 },
- {0x14e4, 0x16a7, 0x14e4, 0x0009, 0, 0, BCM5703 },
- {0x14e4, 0x16a7, 0x14e4, 0x000a, 0, 0, BCM5703A31 },
- {0x14e4, 0x16a7, 0x14e4, 0x000b, 0, 0, BCM5703 },
- {0x14e4, 0x16a7, 0x14e4, 0x800a, 0, 0, BCM5703 },
- {0x14e4, 0x16a7, 0x0e11, 0xca, 0, 0, NC7771 },
- {0x14e4, 0x16a7, 0x0e11, 0xcb, 0, 0, NC7781 },
- {0x14e4, 0x16a7, 0x1014, 0x0281, 0, 0, BCM5703ARBUCKLE },
- {0x14e4, 0x16a7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 },
- {0x14e4, 0x16c7, 0x14e4, 0x000a, 0, 0, BCM5703A31 },
- {0x14e4, 0x16c7, 0x0e11, 0xca, 0, 0, NC7771 },
- {0x14e4, 0x16c7, 0x0e11, 0xcb, 0, 0, NC7781 },
- {0x14e4, 0x16c7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703 },
- {0x14e4, 0x1648, 0x0e11, 0xcf, 0, 0, NC7772 },
- {0x14e4, 0x1648, 0x0e11, 0xd0, 0, 0, NC7782 },
- {0x14e4, 0x1648, 0x0e11, 0xd1, 0, 0, NC7783 },
- {0x14e4, 0x1648, 0x10b7, 0x2000, 0, 0, TC998T },
- {0x14e4, 0x1648, 0x10b7, 0x3000, 0, 0, TC999T },
- {0x14e4, 0x1648, 0x1166, 0x1648, 0, 0, BCM5704CIOBE },
- {0x14e4, 0x1648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5704 },
- {0x14e4, 0x1649, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5704S },
- {0x14e4, 0x16a8, 0x14e4, 0x16a8, 0, 0, BCM5704S },
- {0x14e4, 0x16a8, 0x10b7, 0x2001, 0, 0, TC998SX },
- {0x14e4, 0x16a8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5704S },
- {0x14e4, 0x1653, 0x0e11, 0x00e3, 0, 0, NC7761 },
- {0x14e4, 0x1653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5705 },
- {0x14e4, 0x1654, 0x0e11, 0x00e3, 0, 0, NC7761 },
- {0x14e4, 0x1654, 0x103c, 0x3100, 0, 0, NC1020 },
- {0x14e4, 0x1654, 0x103c, 0x3226, 0, 0, NC150T },
- {0x14e4, 0x1654, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5705 },
- {0x14e4, 0x165d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5705M },
- {0x14e4, 0x165e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5705M },
- {0x14e4, 0x166e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5705F },
- {0x14e4, 0x1696, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5782 },
- {0x14e4, 0x169c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5788 },
- {0x14e4, 0x169d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5789 },
- {0x14e4, 0x170d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5901 },
- {0x14e4, 0x170e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5901 },
- {0x14e4, 0x1676, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5750 },
- {0x14e4, 0x167c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5750M },
- {0x14e4, 0x1677, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5751 },
- {0x14e4, 0x167d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5751M },
- {0x14e4, 0x167e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5751F },
- {0x14e4, 0x1658, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5720 },
- {0x14e4, 0x1659, 0x103c, 0x7031, 0, 0, NC320T },
- {0x14e4, 0x1659, 0x103c, 0x7032, 0, 0, NC320T },
- {0x14e4, 0x166a, 0x103c, 0x7035, 0, 0, NC325I },
- {0x14e4, 0x166b, 0x103c, 0x7036, 0, 0, NC325I },
- {0x14e4, 0x1668, 0x103c, 0x7039, 0, 0, NC324I },
- {0x14e4, 0x1669, 0x103c, 0x703a, 0, 0, NC324I },
- {0x14e4, 0x1678, 0x103c, 0x703e, 0, 0, NC326I },
- {0x14e4, 0x1679, 0x103c, 0x703c, 0, 0, NC326I },
- {0x14e4, 0x1659, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5721 },
- {0x14e4, 0x16f7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5753 },
- {0x14e4, 0x16fd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5753M },
- {0x14e4, 0x16fe, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5753F },
- {0x14e4, 0x16dd, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5781 },
- {0x14e4, 0x1600, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5752 },
- {0x14e4, 0x1601, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5752M },
- {0x14e4, 0x1668, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5714 },
- {0x14e4, 0x166a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5780 },
- {0x14e4, 0x166b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5780S },
- {0x14e4, 0x1678, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5715 },
- {0x14e4, 0x471f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM4785 },
- {0x14e4, 0x16ff, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5903M },
- {0x173b, 0x03ed, PCI_ANY_ID, PCI_ANY_ID, 0, 0, UNK5788 },
- {0,}
- };
-
-MODULE_DEVICE_TABLE(pci, bcm5700_pci_tbl);
-
-#if (LINUX_VERSION_CODE >= 0x2060a)
- static struct pci_device_id pci_AMD762id[]={
- { PCI_DEVICE(PCI_VENDOR_ID_AMD,
- PCI_DEVICE_ID_AMD_FE_GATE_700C) },
- { }
- };
-#endif
-
-static int sbgige = -1;
-
-/*******************************************************************************
- *******************************************************************************
-*/
-
-int get_csum_flag(LM_UINT32 ChipRevId)
-{
- return NETIF_F_IP_CSUM;
-}
-
-/*******************************************************************************
- *******************************************************************************
-
- This function returns true if the device passed to it is attached to an
- ICH-ICH4. If the chip is not attached to an ICH, or is attached to an ICH5
- or newer, it returns false.
-
- This function determines which bridge it is attached to by scaning the pci
- bus looking for bridge chips (hdr_type=1). When a bridge chip is detected,
- the bridge's subordinate's secondary bus number is compared with this
- devices bus number. If they match, then the device is attached to this
- bridge. The bridge's device id is compared to a list of known device ids for
- ICH-ICH4. Since many older ICH's (ICH2-ICH7) share the same device id, the
- chip revision must also be checked to determine if the chip is older than an
- ICH5.
-
- To scan the bus, one of two functions is used depending on the kernel
- version. For 2.4 kernels, the pci_find_device function is used. This
- function has been depricated in the 2.6 kernel and replaced with the
- fucntion pci_get_device. The macro walk_pci_bus determines which function to
- use when the driver is built.
-*/
-
-#if (LINUX_VERSION_CODE >= 0x2060a)
-#define walk_pci_bus(d) while ((d = pci_get_device( \
- PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
-
-#define unwalk_pci_bus(d) pci_dev_put(d)
-
-#else
-#define walk_pci_bus(d) while ((d = pci_find_device( \
- PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
-#define unwalk_pci_bus(d)
-
-#endif
-
-#define ICH5_CHIP_VERSION 0xc0
-
-static struct pci_device_id pci_ICHtable[] = {
- {0x8086, 0x2418}, /* PCI_DEVICE_ID_INTEL_82801AA_8 */
- {0x8086, 0x2428}, /* PCI_DEVICE_ID_INTEL_82801AB_8 */
- {0x8086, 0x244e}, /* PCI_DEVICE_ID_INTEL_82801BA_6 */
- {0x8086, 0x2448}, /* PCI_DEVICE_ID_INTEL_82801BA_11 */
- {0, 0}
-};
-
-int attached_to_ICH4_or_older( struct pci_dev *pdev)
-{
- struct pci_dev *tmp_pdev = NULL;
- struct pci_device_id *ich_table;
- u8 chip_rev;
-
- walk_pci_bus (tmp_pdev) {
- if ((tmp_pdev->hdr_type == 1) &&
- (tmp_pdev->subordinate != NULL) &&
- (tmp_pdev->subordinate->secondary == pdev->bus->number)) {
-
- ich_table = pci_ICHtable;
-
- while (ich_table->vendor) {
- if ((ich_table->vendor == tmp_pdev->vendor) &&
- (ich_table->device == tmp_pdev->device)) {
-
- pci_read_config_byte( tmp_pdev,
- PCI_REVISION_ID, &chip_rev);
-
- if (chip_rev < ICH5_CHIP_VERSION) {
- unwalk_pci_bus( tmp_pdev);
- return 1;
- }
- }
- ich_table++;
- }
- }
- }
- return 0;
-}
-
-static void robo_set_power_mode(void *h)
-{
- //int status = 0;
- int i;
- //uint8 mode8;
- //uint16 mode16;
- uint32 flags = 0, temp32 = 0,val32 = 0, savephyaddr = 0;
- PUM_DEVICE_BLOCK pudev = (PUM_DEVICE_BLOCK)h;
- PLM_DEVICE_BLOCK pdev = &pudev->lm_dev;
-
- /*Brcm,Alex,2006.7.20. Adding Phy power mode setting*/
- BCM5700_PHY_LOCK(pudev, flags);
- savephyaddr = pdev->PhyAddr;
-
- for(i = 0; i < 8; i++)
- {
- pdev->PhyAddr = i;
- temp32 = 0x2007;
- LM_WritePhy(pdev, 0x18, temp32);
- LM_ReadPhy(pdev, 0x18, &val32);
-// printk(KERN_DEBUG "Alex: port = %x, read value =%x\n",i, val32);
- temp32 = 0xc042;
- LM_WritePhy(pdev, 0x18, temp32);
- /*Read back*/
- temp32 = 0x2007;
- val32 = 0;
- LM_WritePhy(pdev, 0x18, temp32);
- LM_ReadPhy(pdev, 0x18, &val32);
-// printk(KERN_ERR "Alex: read back value =%x\n",val32);
- }
-
- pdev->PhyAddr = savephyaddr;
- BCM5700_PHY_UNLOCK(pudev, flags);
-
- /*end of Brcm,Alex,2006.7.20. Adding Phy power mode setting*/
-
-}
-
-static int
-__devinit bcm5700_init_board(struct pci_dev *pdev, struct net_device **dev_out, int board_idx)
-{
- struct net_device *dev;
- PUM_DEVICE_BLOCK pUmDevice;
- PLM_DEVICE_BLOCK pDevice;
- bool rgmii = FALSE;
- sb_t *sbh = NULL;
- int rc;
-
- *dev_out = NULL;
-
- /* dev zeroed in init_etherdev */
-#if (LINUX_VERSION_CODE >= 0x20600)
- dev = alloc_etherdev(sizeof(*pUmDevice));
-#else
- dev = init_etherdev(NULL, sizeof(*pUmDevice));
-#endif
- if (dev == NULL) {
- printk(KERN_ERR "%s: unable to alloc new ethernet\n", bcm5700_driver);
- return -ENOMEM;
- }
- SET_MODULE_OWNER(dev);
-#if (LINUX_VERSION_CODE >= 0x20600)
- SET_NETDEV_DEV(dev, &pdev->dev);
-#endif
- pUmDevice = (PUM_DEVICE_BLOCK) dev->priv;
-
- /* enable device (incl. PCI PM wakeup), and bus-mastering */
- rc = pci_enable_device(pdev);
- if (rc)
- goto err_out;
-
- /* init core specific stuff */
- if (pdev->device == T3_PCI_DEVICE_ID(T3_PCI_ID_BCM471F)) {
- sbh = sb_kattach(SB_OSH);
- sb_gige_init(sbh, ++sbgige, &rgmii);
- }
-
- rc = pci_request_regions(pdev, bcm5700_driver);
- if (rc) {
- if (!sbh)
- goto err_out;
- printk(KERN_INFO "bcm5700_init_board: pci_request_regions returned error %d\n"
- "This may be because the region is already requested by"
- " the SMBus driver. Ignore the PCI error messages.\n", rc);
- }
-
- pci_set_master(pdev);
-
- if (pci_set_dma_mask(pdev, BCM_64BIT_DMA_MASK) == 0) {
- pUmDevice->using_dac = 1;
- if (pci_set_consistent_dma_mask(pdev, BCM_64BIT_DMA_MASK) != 0) {
- printk(KERN_ERR "pci_set_consistent_dma_mask failed\n");
- pci_release_regions(pdev);
- goto err_out;
- }
- } else if (pci_set_dma_mask(pdev, BCM_32BIT_DMA_MASK) == 0) {
- pUmDevice->using_dac = 0;
- } else {
- printk(KERN_ERR "System does not support DMA\n");
- pci_release_regions(pdev);
- goto err_out;
- }
-
- pUmDevice->dev = dev;
- pUmDevice->pdev = pdev;
- pUmDevice->mem_list_num = 0;
- pUmDevice->next_module = root_tigon3_dev;
- pUmDevice->index = board_idx;
- pUmDevice->sbh = (void *)sbh;
- root_tigon3_dev = dev;
-
- spin_lock_init(&pUmDevice->global_lock);
-
- spin_lock_init(&pUmDevice->undi_lock);
-
- spin_lock_init(&pUmDevice->phy_lock);
-
- pDevice = &pUmDevice->lm_dev;
- pDevice->Flags = 0;
- pDevice->FunctNum = PCI_FUNC(pUmDevice->pdev->devfn);
- pUmDevice->boardflags = getintvar(NULL, "boardflags");
- if (sbh) {
- if (pUmDevice->boardflags & BFL_ENETROBO)
- pDevice->Flags |= ROBO_SWITCH_FLAG;
- pDevice->Flags |= rgmii ? RGMII_MODE_FLAG : 0;
- if (sb_chip(sbh) == BCM4785_CHIP_ID && sb_chiprev(sbh) < 2)
- pDevice->Flags |= ONE_DMA_AT_ONCE_FLAG;
- pDevice->Flags |= SB_CORE_FLAG;
- if (sb_chip(sbh) == BCM4785_CHIP_ID)
- pDevice->Flags |= FLUSH_POSTED_WRITE_FLAG;
- }
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- if (board_idx < MAX_UNITS) {
- bcm5700_validate_param_range(pUmDevice, &mtu[board_idx], "mtu", 1500, 9000, 1500);
- dev->mtu = mtu[board_idx];
- }
-#endif
-
- if (attached_to_ICH4_or_older(pdev)) {
- pDevice->Flags |= UNDI_FIX_FLAG;
- }
-
-#if (LINUX_VERSION_CODE >= 0x2060a)
- if (pci_dev_present(pci_AMD762id)) {
- pDevice->Flags |= FLUSH_POSTED_WRITE_FLAG;
- pDevice->Flags &= ~NIC_SEND_BD_FLAG;
- }
-#else
- if (pci_find_device(0x1022, 0x700c, NULL)) {
- /* AMD762 writes I/O out of order */
- /* Setting bit 1 in 762's register 0x4C still doesn't work */
- /* in all cases */
- pDevice->Flags |= FLUSH_POSTED_WRITE_FLAG;
- pDevice->Flags &= ~NIC_SEND_BD_FLAG;
- }
-#endif
- if (LM_GetAdapterInfo(pDevice) != LM_STATUS_SUCCESS) {
- rc = -ENODEV;
- goto err_out_unmap;
- }
-
- if (pDevice->Flags & ROBO_SWITCH_FLAG) {
- robo_info_t *robo;
-
- if ((robo = bcm_robo_attach(sbh, pDevice, dev->name, NULL,
- robo_miird, robo_miiwr)) == NULL) {
- B57_ERR(("robo_setup: failed to attach robo switch \n"));
- goto robo_fail;
- }
-
- if (bcm_robo_enable_device(robo)) {
- B57_ERR(("robo_setup: failed to enable robo switch \n"));
-robo_fail:
- bcm_robo_detach(robo);
- rc = -ENODEV;
- goto err_out_unmap;
- }
-
- /* 5397 power mode setting */
- robo_set_power_mode(robo->h);
-
- pUmDevice->robo = (void *)robo;
- }
-
- if ((pDevice->Flags & JUMBO_CAPABLE_FLAG) == 0) {
- if (dev->mtu > 1500) {
- dev->mtu = 1500;
- printk(KERN_WARNING
- "%s-%d: Jumbo mtu sizes not supported, using mtu=1500\n",
- bcm5700_driver, pUmDevice->index);
- }
- }
-
- pUmDevice->do_global_lock = 0;
- if (T3_ASIC_REV(pUmDevice->lm_dev.ChipRevId) == T3_ASIC_REV_5700) {
- /* The 5700 chip works best without interleaved register */
- /* accesses on certain machines. */
- pUmDevice->do_global_lock = 1;
- }
-
- if ((T3_ASIC_REV(pUmDevice->lm_dev.ChipRevId) == T3_ASIC_REV_5701) &&
- ((pDevice->PciState & T3_PCI_STATE_NOT_PCI_X_BUS) == 0)) {
-
- pUmDevice->rx_buf_align = 0;
- } else {
- pUmDevice->rx_buf_align = 2;
- }
- dev->mem_start = pci_resource_start(pdev, 0);
- dev->mem_end = dev->mem_start + sizeof(T3_STD_MEM_MAP);
- dev->irq = pdev->irq;
-
- *dev_out = dev;
- return 0;
-
-err_out_unmap:
- pci_release_regions(pdev);
- bcm5700_freemem(dev);
-
-err_out:
-#if (LINUX_VERSION_CODE < 0x020600)
- unregister_netdev(dev);
- kfree(dev);
-#else
- free_netdev(dev);
-#endif
- return rc;
-}
-
-static int __devinit
-bcm5700_print_ver(void)
-{
- printk(KERN_INFO "Broadcom Gigabit Ethernet Driver %s ",
- bcm5700_driver);
- printk("ver. %s %s\n", bcm5700_version, bcm5700_date);
- return 0;
-}
-
-static int __devinit
-bcm5700_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- struct net_device *dev = NULL;
- PUM_DEVICE_BLOCK pUmDevice;
- PLM_DEVICE_BLOCK pDevice;
- int i;
- static int board_idx = -1;
- static int printed_version = 0;
- struct pci_dev *pci_dev;
-
- board_idx++;
-
- if (!printed_version) {
- bcm5700_print_ver();
- printed_version = 1;
- }
-
- i = bcm5700_init_board(pdev, &dev, board_idx);
- if (i < 0) {
- return i;
- }
-
- if (dev == NULL)
- return -ENOMEM;
-
-#ifdef BCM_IOCTL32
- if (atomic_read(&bcm5700_load_count) == 0) {
- register_ioctl32_conversion(SIOCNICE, bcm5700_ioctl32);
- }
- atomic_inc(&bcm5700_load_count);
-#endif
- dev->open = bcm5700_open;
- dev->hard_start_xmit = bcm5700_start_xmit;
- dev->stop = bcm5700_close;
- dev->get_stats = bcm5700_get_stats;
- dev->set_multicast_list = bcm5700_set_rx_mode;
- dev->do_ioctl = bcm5700_ioctl;
- dev->set_mac_address = &bcm5700_set_mac_addr;
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- dev->change_mtu = &bcm5700_change_mtu;
-#endif
-#if (LINUX_VERSION_CODE >= 0x20400)
- dev->tx_timeout = bcm5700_reset;
- dev->watchdog_timeo = TX_TIMEOUT;
-#endif
-#ifdef BCM_VLAN
- dev->vlan_rx_register = &bcm5700_vlan_rx_register;
- dev->vlan_rx_kill_vid = &bcm5700_vlan_rx_kill_vid;
-#endif
-#ifdef BCM_NAPI_RXPOLL
- dev->poll = bcm5700_poll;
- dev->weight = 64;
-#endif
-
- pUmDevice = (PUM_DEVICE_BLOCK) dev->priv;
- pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
-
- dev->base_addr = pci_resource_start(pdev, 0);
- dev->irq = pdev->irq;
-#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER)
- dev->poll_controller = poll_bcm5700;
-#endif
-
-#if (LINUX_VERSION_CODE >= 0x20600)
- if ((i = register_netdev(dev))) {
- printk(KERN_ERR "%s: Cannot register net device\n",
- bcm5700_driver);
- if (pUmDevice->lm_dev.pMappedMemBase)
- iounmap(pUmDevice->lm_dev.pMappedMemBase);
- pci_release_regions(pdev);
- bcm5700_freemem(dev);
- free_netdev(dev);
- return i;
- }
-#endif
-
-
- pci_set_drvdata(pdev, dev);
-
- memcpy(dev->dev_addr, pDevice->NodeAddress, 6);
- pUmDevice->name = board_info[ent->driver_data].name,
- printk(KERN_INFO "%s: %s found at mem %lx, IRQ %d, ",
- dev->name, pUmDevice->name, dev->base_addr,
- dev->irq);
- printk("node addr ");
- for (i = 0; i < 6; i++) {
- printk("%2.2x", dev->dev_addr[i]);
- }
- printk("\n");
-
- printk(KERN_INFO "%s: ", dev->name);
- if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5400_PHY_ID)
- printk("Broadcom BCM5400 Copper ");
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
- printk("Broadcom BCM5401 Copper ");
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5411_PHY_ID)
- printk("Broadcom BCM5411 Copper ");
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5461_PHY_ID)
- printk("Broadcom BCM5461 Copper ");
- else if (((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5701_PHY_ID) &&
- !(pDevice->TbiFlags & ENABLE_TBI_FLAG)) {
- printk("Broadcom BCM5701 Integrated Copper ");
- }
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5703_PHY_ID) {
- printk("Broadcom BCM5703 Integrated ");
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- printk("SerDes ");
- else
- printk("Copper ");
- }
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5704_PHY_ID) {
- printk("Broadcom BCM5704 Integrated ");
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- printk("SerDes ");
- else
- printk("Copper ");
- }
- else if (pDevice->PhyFlags & PHY_IS_FIBER){
- if(( pDevice->PhyId & PHY_ID_MASK ) == PHY_BCM5780_PHY_ID)
- printk("Broadcom BCM5780S Integrated Serdes ");
-
- }
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5705_PHY_ID)
- printk("Broadcom BCM5705 Integrated Copper ");
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5750_PHY_ID)
- printk("Broadcom BCM5750 Integrated Copper ");
-
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5714_PHY_ID)
- printk("Broadcom BCM5714 Integrated Copper ");
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5780_PHY_ID)
- printk("Broadcom BCM5780 Integrated Copper ");
-
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5752_PHY_ID)
- printk("Broadcom BCM5752 Integrated Copper ");
- else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM8002_PHY_ID)
- printk("Broadcom BCM8002 SerDes ");
- else if (pDevice->TbiFlags & ENABLE_TBI_FLAG) {
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) {
- printk("Broadcom BCM5703 Integrated SerDes ");
- }
- else if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704) {
- printk("Broadcom BCM5704 Integrated SerDes ");
- }
- else {
- printk("Agilent HDMP-1636 SerDes ");
- }
- }
- else {
- printk("Unknown ");
- }
- printk("transceiver found\n");
-
-#if (LINUX_VERSION_CODE >= 0x20400)
- if (scatter_gather[board_idx]) {
- dev->features |= NETIF_F_SG;
- if (pUmDevice->using_dac && !(pDevice->Flags & BCM5788_FLAG))
- dev->features |= NETIF_F_HIGHDMA;
- }
- if ((pDevice->TaskOffloadCap & LM_TASK_OFFLOAD_TX_TCP_CHECKSUM) &&
- tx_checksum[board_idx]) {
-
- dev->features |= get_csum_flag( pDevice->ChipRevId);
- }
-#ifdef BCM_VLAN
- dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
-#endif
-#ifdef BCM_TSO
- /* On 5714/15/80 chips, Jumbo Frames and TSO cannot both be enabled at
- the same time. Since only one of these features can be enable at a
- time, we'll enable only Jumbo Frames and disable TSO when the user
- tries to enable both.
- */
- dev->features &= ~NETIF_F_TSO;
-
- if ((pDevice->TaskToOffload & LM_TASK_OFFLOAD_TCP_SEGMENTATION) &&
- (enable_tso[board_idx])) {
- if (T3_ASIC_5714_FAMILY(pDevice->ChipRevId) &&
- (dev->mtu > 1500)) {
- printk(KERN_ALERT "%s: Jumbo Frames and TSO cannot simultaneously be enabled. Jumbo Frames enabled. TSO disabled.\n", dev->name);
- } else {
- dev->features |= NETIF_F_TSO;
- }
- }
-#endif
- printk(KERN_INFO "%s: Scatter-gather %s, 64-bit DMA %s, Tx Checksum %s, ",
- dev->name,
- (char *) ((dev->features & NETIF_F_SG) ? "ON" : "OFF"),
- (char *) ((dev->features & NETIF_F_HIGHDMA) ? "ON" : "OFF"),
- (char *) ((dev->features & get_csum_flag( pDevice->ChipRevId)) ? "ON" : "OFF"));
-#endif
- if ((pDevice->ChipRevId != T3_CHIP_ID_5700_B0) &&
- rx_checksum[board_idx])
- printk("Rx Checksum ON");
- else
- printk("Rx Checksum OFF");
-#ifdef BCM_VLAN
- printk(", 802.1Q VLAN ON");
-#endif
-#ifdef BCM_TSO
- if (dev->features & NETIF_F_TSO) {
- printk(", TSO ON");
- }
- else
-#endif
-#ifdef BCM_NAPI_RXPOLL
- printk(", NAPI ON");
-#endif
- printk("\n");
-
- register_reboot_notifier(&bcm5700_reboot_notifier);
-#ifdef BCM_TASKLET
- tasklet_init(&pUmDevice->tasklet, bcm5700_tasklet,
- (unsigned long) pUmDevice);
-#endif
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704) {
- if ((REG_RD(pDevice, PciCfg.DualMacCtrl) &
- T3_DUAL_MAC_CH_CTRL_MASK) == 3) {
-
-printk(KERN_WARNING "%s: Device is configured for Hardware Based Teaming which is not supported with this operating system. Please consult the user diagnostic guide to disable Turbo Teaming.\n", dev->name);
- }
- }
-
-#if (LINUX_VERSION_CODE > 0x20605)
-
- if ((pci_dev = pci_get_device(0x1022, 0x700c, NULL)))
-#else
- if ((pci_dev = pci_find_device(0x1022, 0x700c, NULL)))
-#endif
- {
- u32 val;
-
- /* Found AMD 762 North bridge */
- pci_read_config_dword(pci_dev, 0x4c, &val);
- if ((val & 0x02) == 0) {
- pci_write_config_dword(pci_dev, 0x4c, val | 0x02);
- printk(KERN_INFO "%s: Setting AMD762 Northbridge to enable PCI ordering compliance\n", bcm5700_driver);
- }
- }
-
-#if (LINUX_VERSION_CODE > 0x20605)
-
- pci_dev_put(pci_dev);
-
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_PCI_USE_VECTOR)
-
- if ((pci_dev = pci_get_device(0x1066, 0x0017, NULL))) {
- bcm_msi_chipset_bug = 1;
- }
- pci_dev_put(pci_dev);
-#endif
-#endif
-
- return 0;
-}
-
-
-static void __devexit
-bcm5700_remove_one (struct pci_dev *pdev)
-{
- struct net_device *dev = pci_get_drvdata (pdev);
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
-
-#ifdef BCM_IOCTL32
- atomic_dec(&bcm5700_load_count);
- if (atomic_read(&bcm5700_load_count) == 0)
- unregister_ioctl32_conversion(SIOCNICE);
-#endif
- unregister_netdev(dev);
-
- if (pUmDevice->lm_dev.pMappedMemBase)
- iounmap(pUmDevice->lm_dev.pMappedMemBase);
-
- pci_release_regions(pdev);
-
-#if (LINUX_VERSION_CODE < 0x020600)
- kfree(dev);
-#else
- free_netdev(dev);
-#endif
-
- pci_set_drvdata(pdev, NULL);
-
-}
-
-int b57_test_intr(UM_DEVICE_BLOCK *pUmDevice);
-
-#ifdef BCM_WL_EMULATOR
-/* new transmit callback */
-static int bcm5700emu_start_xmit(struct sk_buff *skb, struct net_device *dev);
-/* keep track of the 2 gige devices */
-static PLM_DEVICE_BLOCK pDev1;
-static PLM_DEVICE_BLOCK pDev2;
-
-static void
-bcm5700emu_open(struct net_device *dev)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- static int instance = 0;
- static char *wlemu_if = NULL;
- char *wlemu_mode = NULL;
- //int wlemu_idx = 0;
- static int rx_enable = 0;
- static int tx_enable = 0;
-
- /* which interface is the emulator ? */
- if(instance == 0) {
- wlemu_if = nvram_get("wlemu_if");
- /* do we emulate rx, tx or both */
- wlemu_mode = nvram_get("wlemu_mode");
- if(wlemu_mode) {
- if (!strcmp(wlemu_mode,"rx"))
- {
- rx_enable = 1;
- }
- else if (!strcmp(wlemu_mode,"tx"))
- {
-
- tx_enable = 1;
-
- }
- else if (!strcmp(wlemu_mode,"rx_tx"))
- {
-
- rx_enable = 1;
- tx_enable = 1;
- }
- }
- }
-
- instance++;
-
- /* The context is used for accessing the OSL for emulating devices */
- pDevice->wlc = NULL;
-
- /* determines if this device is an emulator */
- pDevice->wl_emulate_rx = 0;
- pDevice->wl_emulate_tx = 0;
-
- if(wlemu_if && !strcmp(dev->name,wlemu_if))
- {
- /* create an emulator context. */
- pDevice->wlc = (void *)wlcemu_wlccreate((void *)dev);
- B57_INFO(("Using %s for wl emulation \n", dev->name));
- if(rx_enable)
- {
- B57_INFO(("Enabling wl RX emulation \n"));
- pDevice->wl_emulate_rx = 1;
- }
- /* re-direct transmit callback to emulator */
- if(tx_enable)
- {
- pDevice->wl_emulate_tx = 1;
- dev->hard_start_xmit = bcm5700emu_start_xmit;
- B57_INFO(("Enabling wl TX emulation \n"));
- }
- }
- /* for debug access to configured devices only */
- if(instance == 1)
- pDev1 = pDevice;
- else if (instance == 2)
- pDev2 = pDevice;
-}
-
-/* Public API to get current emulation info */
-int bcm5700emu_get_info(char *buf)
-{
- int len = 0;
- PLM_DEVICE_BLOCK p;
-
- /* look for an emulating device */
- if(pDev1->wlc) {
- p = pDev1;
- len += sprintf(buf+len,"emulation device : eth0\n");
- }
- else if (pDev2->wlc) {
- p = pDev2;
- len += sprintf(buf+len,"emulation device : eth1\n");
- }
- else {
- len += sprintf(buf+len,"emulation not activated\n");
- return len;
- }
- if(p->wl_emulate_rx)
- len += sprintf(buf+len,"RX emulation enabled\n");
- else
- len += sprintf(buf+len,"RX emulation disabled\n");
- if(p->wl_emulate_tx)
- len += sprintf(buf+len,"TX emulation enabled\n");
- else
- len += sprintf(buf+len,"TX emulation disabled\n");
- return len;
-
-}
-
-
-/* Public API to access the bcm5700_start_xmit callback */
-
-int
-bcm5700emu_forward_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- return bcm5700_start_xmit(skb, dev);
-}
-
-
-/* hook to kernel txmit callback */
-STATIC int
-bcm5700emu_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- return wlcemu_start_xmit(skb,pDevice->wlc);
-}
-
-#endif /* BCM_WL_EMULATOR */
-
-int
-bcm5700_open(struct net_device *dev)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- int rc;
-
- if (pUmDevice->suspended){
- return -EAGAIN;
- }
-
-#ifdef BCM_WL_EMULATOR
- bcm5700emu_open(dev);
-#endif
-
- /* delay for 6 seconds */
- pUmDevice->delayed_link_ind = (6 * HZ) / pUmDevice->timer_interval;
-
-#ifdef BCM_INT_COAL
-#ifndef BCM_NAPI_RXPOLL
- pUmDevice->adaptive_expiry = HZ / pUmDevice->timer_interval;
-#endif
-#endif
-
-#ifdef INCLUDE_TBI_SUPPORT
- if ((pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
- (pDevice->TbiFlags & TBI_POLLING_FLAGS)) {
- pUmDevice->poll_tbi_interval = HZ / pUmDevice->timer_interval;
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) {
- pUmDevice->poll_tbi_interval /= 4;
- }
- pUmDevice->poll_tbi_expiry = pUmDevice->poll_tbi_interval;
- }
-#endif
- /* set this timer for 2 seconds */
- pUmDevice->asf_heartbeat = (2 * HZ) / pUmDevice->timer_interval;
-
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_PCI_USE_VECTOR)
-
-
- if ( ( (T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId) ) &&
- (T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5714_A0 ) &&
- (T3_CHIP_REV(pDevice->ChipRevId) != T3_CHIP_REV_5750_AX ) &&
- (T3_CHIP_REV(pDevice->ChipRevId) != T3_CHIP_REV_5750_BX ) ) &&
- !bcm_msi_chipset_bug ){
-
- if (disable_msi[pUmDevice->index]==1){
- /* do nothing-it's not turned on */
- }else{
- pDevice->Flags |= USING_MSI_FLAG;
-
- REG_WR(pDevice, Msi.Mode, 2 );
-
- rc = pci_enable_msi(pUmDevice->pdev);
-
- if(rc!=0){
- pDevice->Flags &= ~ USING_MSI_FLAG;
- REG_WR(pDevice, Msi.Mode, 1 );
- }
- }
- }
-
-
-#endif
-
- if ((rc= request_irq(pUmDevice->pdev->irq, &bcm5700_interrupt, SA_SHIRQ, dev->name, dev)))
- {
-
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_PCI_USE_VECTOR)
-
- if(pDevice->Flags & USING_MSI_FLAG) {
-
- pci_disable_msi(pUmDevice->pdev);
- pDevice->Flags &= ~USING_MSI_FLAG;
- REG_WR(pDevice, Msi.Mode, 1 );
-
- }
-#endif
- return rc;
- }
-
- pUmDevice->opened = 1;
- if (LM_InitializeAdapter(pDevice) != LM_STATUS_SUCCESS) {
- pUmDevice->opened = 0;
- free_irq(dev->irq, dev);
- bcm5700_freemem(dev);
- return -EAGAIN;
- }
-
- bcm5700_set_vlan_mode(pUmDevice);
- bcm5700_init_counters(pUmDevice);
-
- if (pDevice->Flags & UNDI_FIX_FLAG) {
- printk(KERN_INFO "%s: Using indirect register access\n", dev->name);
- }
-
- if (memcmp(dev->dev_addr, pDevice->NodeAddress, 6))
- {
- /* Do not use invalid eth addrs: any multicast & all zeros */
- if( is_valid_ether_addr(dev->dev_addr) ){
- LM_SetMacAddress(pDevice, dev->dev_addr);
- }
- else
- {
- printk(KERN_INFO "%s: Invalid administered node address\n",dev->name);
- memcpy(dev->dev_addr, pDevice->NodeAddress, 6);
- }
- }
-
- if (tigon3_debug > 1)
- printk(KERN_DEBUG "%s: tigon3_open() irq %d.\n", dev->name, dev->irq);
-
- QQ_InitQueue(&pUmDevice->rx_out_of_buf_q.Container,
- MAX_RX_PACKET_DESC_COUNT);
-
-
-#if (LINUX_VERSION_CODE < 0x020300)
- MOD_INC_USE_COUNT;
-#endif
-
- atomic_set(&pUmDevice->intr_sem, 0);
-
- LM_EnableInterrupt(pDevice);
-
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_PCI_USE_VECTOR)
-
- if (pDevice->Flags & USING_MSI_FLAG){
-
- /* int test to check support on older machines */
- if (b57_test_intr(pUmDevice) != 1) {
-
- LM_DisableInterrupt(pDevice);
- free_irq(pUmDevice->pdev->irq, dev);
- pci_disable_msi(pUmDevice->pdev);
- REG_WR(pDevice, Msi.Mode, 1 );
- pDevice->Flags &= ~USING_MSI_FLAG;
-
- rc = LM_ResetAdapter(pDevice);
-printk(KERN_ALERT " The MSI support in this system is not functional.\n");
-
- if (rc == LM_STATUS_SUCCESS)
- rc = 0;
- else
- rc = -ENODEV;
-
- if(rc == 0){
- rc = request_irq(pUmDevice->pdev->irq, &bcm5700_interrupt,
- SA_SHIRQ, dev->name, dev);
- }
-
- if(rc){
- LM_Halt(pDevice);
- bcm5700_freemem(dev);
- pUmDevice->opened = 0;
- return rc;
- }
-
-
- pDevice->InitDone = TRUE;
- atomic_set(&pUmDevice->intr_sem, 0);
- LM_EnableInterrupt(pDevice);
- }
- }
-#endif
-
- init_timer(&pUmDevice->timer);
- pUmDevice->timer.expires = RUN_AT(pUmDevice->timer_interval);
- pUmDevice->timer.data = (unsigned long)dev;
- pUmDevice->timer.function = &bcm5700_timer;
- add_timer(&pUmDevice->timer);
-
- if (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId)) {
- init_timer(&pUmDevice->statstimer);
- pUmDevice->statstimer.expires = RUN_AT(pUmDevice->statstimer_interval);
- pUmDevice->statstimer.data = (unsigned long)dev;
- pUmDevice->statstimer.function = &bcm5700_stats_timer;
- add_timer(&pUmDevice->statstimer);
- }
-
- if(pDevice->Flags & USING_MSI_FLAG)
- printk(KERN_INFO "%s: Using Message Signaled Interrupt (MSI) \n", dev->name);
- else
- printk(KERN_INFO "%s: Using PCI INTX interrupt \n", dev->name);
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-
-STATIC void
-bcm5700_stats_timer(unsigned long data)
-{
- struct net_device *dev = (struct net_device *)data;
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- unsigned long flags = 0;
-
- if (!pUmDevice->opened)
- return;
-
- if (!atomic_read(&pUmDevice->intr_sem) &&
- !pUmDevice->suspended &&
- (pDevice->LinkStatus == LM_STATUS_LINK_ACTIVE)) {
- BCM5700_LOCK(pUmDevice, flags);
- LM_GetStats(pDevice);
- BCM5700_UNLOCK(pUmDevice, flags);
- }
-
- pUmDevice->statstimer.expires = RUN_AT(pUmDevice->statstimer_interval);
-
- add_timer(&pUmDevice->statstimer);
-}
-
-
-STATIC void
-bcm5700_timer(unsigned long data)
-{
- struct net_device *dev = (struct net_device *)data;
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- unsigned long flags = 0;
- LM_UINT32 value32;
-
- if (!pUmDevice->opened)
- return;
-
- /* BCM4785: Flush posted writes from GbE to host memory. */
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- REG_RD(pDevice, HostCoalesce.Mode);
-
- if (atomic_read(&pUmDevice->intr_sem) || pUmDevice->suspended) {
- pUmDevice->timer.expires = RUN_AT(pUmDevice->timer_interval);
- add_timer(&pUmDevice->timer);
- return;
- }
-
-#ifdef INCLUDE_TBI_SUPPORT
- if ((pDevice->TbiFlags & TBI_POLLING_FLAGS) &&
- (--pUmDevice->poll_tbi_expiry <= 0)) {
-
- BCM5700_PHY_LOCK(pUmDevice, flags);
- value32 = REG_RD(pDevice, MacCtrl.Status);
- if (((pDevice->LinkStatus == LM_STATUS_LINK_ACTIVE) &&
- ((value32 & (MAC_STATUS_LINK_STATE_CHANGED |
- MAC_STATUS_CFG_CHANGED)) ||
- !(value32 & MAC_STATUS_PCS_SYNCED)))
- ||
- ((pDevice->LinkStatus != LM_STATUS_LINK_ACTIVE) &&
- (value32 & (MAC_STATUS_PCS_SYNCED |
- MAC_STATUS_SIGNAL_DETECTED))))
- {
- LM_SetupPhy(pDevice);
- }
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
- pUmDevice->poll_tbi_expiry = pUmDevice->poll_tbi_interval;
-
- }
-#endif
-
- if (pUmDevice->delayed_link_ind > 0) {
- if (pUmDevice->delayed_link_ind == 1)
- MM_IndicateStatus(pDevice, pDevice->LinkStatus);
- else
- pUmDevice->delayed_link_ind--;
- }
-
- if (pUmDevice->crc_counter_expiry > 0)
- pUmDevice->crc_counter_expiry--;
-
- if (!pUmDevice->interrupt) {
- if (!(pDevice->Flags & USE_TAGGED_STATUS_FLAG)) {
- BCM5700_LOCK(pUmDevice, flags);
- if (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) {
- /* This will generate an interrupt */
- REG_WR(pDevice, Grc.LocalCtrl,
- pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_SET_INT);
- }
- else {
- REG_WR(pDevice, HostCoalesce.Mode,
- pDevice->CoalesceMode |
- HOST_COALESCE_ENABLE |
- HOST_COALESCE_NOW);
- }
- if (!(REG_RD(pDevice, DmaWrite.Mode) &
- DMA_WRITE_MODE_ENABLE)) {
- BCM5700_UNLOCK(pUmDevice, flags);
- bcm5700_reset(dev);
- }
- else {
- BCM5700_UNLOCK(pUmDevice, flags);
- }
- if (pUmDevice->tx_queued) {
- pUmDevice->tx_queued = 0;
- netif_wake_queue(dev);
- }
- }
-#if (LINUX_VERSION_CODE < 0x02032b)
- if ((QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container) !=
- pDevice->TxPacketDescCnt) &&
- ((jiffies - dev->trans_start) > TX_TIMEOUT)) {
-
- printk(KERN_WARNING "%s: Tx hung\n", dev->name);
- bcm5700_reset(dev);
- }
-#endif
- }
-#ifdef BCM_INT_COAL
-#ifndef BCM_NAPI_RXPOLL
- if (pUmDevice->adaptive_coalesce) {
- pUmDevice->adaptive_expiry--;
- if (pUmDevice->adaptive_expiry == 0) {
- pUmDevice->adaptive_expiry = HZ /
- pUmDevice->timer_interval;
- bcm5700_adapt_coalesce(pUmDevice);
- }
- }
-#endif
-#endif
- if (QQ_GetEntryCnt(&pUmDevice->rx_out_of_buf_q.Container) >
- (unsigned int) pUmDevice->rx_buf_repl_panic_thresh) {
- /* Generate interrupt and let isr allocate buffers */
- REG_WR(pDevice, HostCoalesce.Mode, pDevice->CoalesceMode |
- HOST_COALESCE_ENABLE | HOST_COALESCE_NOW);
- }
-
-#ifdef BCM_ASF
- if (pDevice->AsfFlags & ASF_ENABLED) {
- pUmDevice->asf_heartbeat--;
- if (pUmDevice->asf_heartbeat == 0) {
- if( (pDevice->Flags & UNDI_FIX_FLAG) ||
- (pDevice->Flags & ENABLE_PCIX_FIX_FLAG)) {
- MEM_WR_OFFSET(pDevice, T3_CMD_MAILBOX,
- T3_CMD_NICDRV_ALIVE2);
- MEM_WR_OFFSET(pDevice, T3_CMD_LENGTH_MAILBOX,
- 4);
- MEM_WR_OFFSET(pDevice, T3_CMD_DATA_MAILBOX, 5);
- } else {
- LM_RegWr(pDevice,
- (T3_NIC_MBUF_POOL_ADDR +
- T3_CMD_MAILBOX),
- T3_CMD_NICDRV_ALIVE2, 1);
- LM_RegWr(pDevice,
- (T3_NIC_MBUF_POOL_ADDR +
- T3_CMD_LENGTH_MAILBOX),4,1);
- LM_RegWr(pDevice,
- (T3_NIC_MBUF_POOL_ADDR +
- T3_CMD_DATA_MAILBOX),5,1);
- }
-
- value32 = REG_RD(pDevice, Grc.RxCpuEvent);
- REG_WR(pDevice, Grc.RxCpuEvent, value32 | BIT_14);
- pUmDevice->asf_heartbeat = (2 * HZ) /
- pUmDevice->timer_interval;
- }
- }
-#endif
-
- if (pDevice->PhyFlags & PHY_IS_FIBER){
- BCM5700_PHY_LOCK(pUmDevice, flags);
- LM_5714_FamFiberCheckLink(pDevice);
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
- }
-
- pUmDevice->timer.expires = RUN_AT(pUmDevice->timer_interval);
- add_timer(&pUmDevice->timer);
-}
-
-STATIC int
-bcm5700_init_counters(PUM_DEVICE_BLOCK pUmDevice)
-{
-#ifdef BCM_INT_COAL
-#ifndef BCM_NAPI_RXPOLL
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
-
- pUmDevice->rx_curr_coalesce_frames = pDevice->RxMaxCoalescedFrames;
- pUmDevice->rx_curr_coalesce_ticks = pDevice->RxCoalescingTicks;
- pUmDevice->tx_curr_coalesce_frames = pDevice->TxMaxCoalescedFrames;
- pUmDevice->rx_last_cnt = 0;
- pUmDevice->tx_last_cnt = 0;
-#endif
-#endif
- pUmDevice->phy_crc_count = 0;
-#if TIGON3_DEBUG
- pUmDevice->tx_zc_count = 0;
- pUmDevice->tx_chksum_count = 0;
- pUmDevice->tx_himem_count = 0;
- pUmDevice->rx_good_chksum_count = 0;
- pUmDevice->rx_bad_chksum_count = 0;
-#endif
-#ifdef BCM_TSO
- pUmDevice->tso_pkt_count = 0;
-#endif
- return 0;
-}
-
-#ifdef BCM_INT_COAL
-#ifndef BCM_NAPI_RXPOLL
-STATIC int
-bcm5700_do_adapt_coalesce(PUM_DEVICE_BLOCK pUmDevice,
- int rx_frames, int rx_ticks, int tx_frames, int rx_frames_intr)
-{
- unsigned long flags = 0;
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
-
- if (pUmDevice->do_global_lock) {
- if (spin_is_locked(&pUmDevice->global_lock))
- return 0;
- spin_lock_irqsave(&pUmDevice->global_lock, flags);
- }
- pUmDevice->rx_curr_coalesce_frames = rx_frames;
- pUmDevice->rx_curr_coalesce_ticks = rx_ticks;
- pUmDevice->tx_curr_coalesce_frames = tx_frames;
- pUmDevice->rx_curr_coalesce_frames_intr = rx_frames_intr;
- REG_WR(pDevice, HostCoalesce.RxMaxCoalescedFrames, rx_frames);
-
- REG_WR(pDevice, HostCoalesce.RxCoalescingTicks, rx_ticks);
-
- REG_WR(pDevice, HostCoalesce.TxMaxCoalescedFrames, tx_frames);
-
- REG_WR(pDevice, HostCoalesce.RxMaxCoalescedFramesDuringInt,
- rx_frames_intr);
-
- BCM5700_UNLOCK(pUmDevice, flags);
- return 0;
-}
-
-STATIC int
-bcm5700_adapt_coalesce(PUM_DEVICE_BLOCK pUmDevice)
-{
- PLM_DEVICE_BLOCK pDevice = &pUmDevice->lm_dev;
- uint rx_curr_cnt, tx_curr_cnt, rx_delta, tx_delta, total_delta;
-
- rx_curr_cnt = pDevice->pStatsBlkVirt->ifHCInUcastPkts.Low;
- tx_curr_cnt = pDevice->pStatsBlkVirt->ifHCOutUcastPkts.Low;
- if ((rx_curr_cnt <= pUmDevice->rx_last_cnt) ||
- (tx_curr_cnt < pUmDevice->tx_last_cnt)) {
-
- /* skip if there is counter rollover */
- pUmDevice->rx_last_cnt = rx_curr_cnt;
- pUmDevice->tx_last_cnt = tx_curr_cnt;
- return 0;
- }
-
- rx_delta = rx_curr_cnt - pUmDevice->rx_last_cnt;
- tx_delta = tx_curr_cnt - pUmDevice->tx_last_cnt;
- total_delta = (((rx_delta + rx_delta) + tx_delta) / 3) << 1;
-
- pUmDevice->rx_last_cnt = rx_curr_cnt;
- pUmDevice->tx_last_cnt = tx_curr_cnt;
-
- if (total_delta < ADAPTIVE_LO_PKT_THRESH) {
- if (pUmDevice->rx_curr_coalesce_frames !=
- ADAPTIVE_LO_RX_MAX_COALESCED_FRAMES) {
-
- bcm5700_do_adapt_coalesce(pUmDevice,
- ADAPTIVE_LO_RX_MAX_COALESCED_FRAMES,
- ADAPTIVE_LO_RX_COALESCING_TICKS,
- ADAPTIVE_LO_TX_MAX_COALESCED_FRAMES,
- ADAPTIVE_LO_RX_MAX_COALESCED_FRAMES_DURING_INT);
- }
- }
- else if (total_delta < ADAPTIVE_HI_PKT_THRESH) {
- if (pUmDevice->rx_curr_coalesce_frames !=
- DEFAULT_RX_MAX_COALESCED_FRAMES) {
-
- bcm5700_do_adapt_coalesce(pUmDevice,
- DEFAULT_RX_MAX_COALESCED_FRAMES,
- DEFAULT_RX_COALESCING_TICKS,
- DEFAULT_TX_MAX_COALESCED_FRAMES,
- DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT);
- }
- }
- else {
- if (pUmDevice->rx_curr_coalesce_frames !=
- ADAPTIVE_HI_RX_MAX_COALESCED_FRAMES) {
-
- bcm5700_do_adapt_coalesce(pUmDevice,
- ADAPTIVE_HI_RX_MAX_COALESCED_FRAMES,
- ADAPTIVE_HI_RX_COALESCING_TICKS,
- ADAPTIVE_HI_TX_MAX_COALESCED_FRAMES,
- ADAPTIVE_HI_RX_MAX_COALESCED_FRAMES_DURING_INT);
- }
- }
- return 0;
-}
-#endif
-#endif
-
-STATIC void
-bcm5700_reset(struct net_device *dev)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- unsigned long flags;
-
-#ifdef BCM_TSO
-
- if( (dev->features & NETIF_F_TSO) &&
- (pUmDevice->tx_full) ) {
-
- dev->features &= ~NETIF_F_TSO;
- }
-#endif
-
- netif_stop_queue(dev);
- bcm5700_intr_off(pUmDevice);
- BCM5700_PHY_LOCK(pUmDevice, flags);
- LM_ResetAdapter(pDevice);
- pDevice->InitDone = TRUE;
- bcm5700_do_rx_mode(dev);
- bcm5700_set_vlan_mode(pUmDevice);
- bcm5700_init_counters(pUmDevice);
- if (memcmp(dev->dev_addr, pDevice->NodeAddress, 6)) {
- LM_SetMacAddress(pDevice, dev->dev_addr);
- }
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
- atomic_set(&pUmDevice->intr_sem, 1);
- bcm5700_intr_on(pUmDevice);
- netif_wake_queue(dev);
-}
-
-STATIC void
-bcm5700_set_vlan_mode(UM_DEVICE_BLOCK *pUmDevice)
-{
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
- LM_UINT32 ReceiveMask = pDevice->ReceiveMask;
- int vlan_tag_mode = pUmDevice->vlan_tag_mode;
-
- if (vlan_tag_mode == VLAN_TAG_MODE_AUTO_STRIP) {
- if (pDevice->AsfFlags & ASF_ENABLED) {
- vlan_tag_mode = VLAN_TAG_MODE_FORCED_STRIP;
- }
- else {
- vlan_tag_mode = VLAN_TAG_MODE_NORMAL_STRIP;
- }
- }
- if (vlan_tag_mode == VLAN_TAG_MODE_NORMAL_STRIP) {
- ReceiveMask |= LM_KEEP_VLAN_TAG;
-#ifdef BCM_VLAN
- if (pUmDevice->vlgrp)
- ReceiveMask &= ~LM_KEEP_VLAN_TAG;
-#endif
- }
- else if (vlan_tag_mode == VLAN_TAG_MODE_FORCED_STRIP) {
- ReceiveMask &= ~LM_KEEP_VLAN_TAG;
- }
- if (ReceiveMask != pDevice->ReceiveMask)
- {
- LM_SetReceiveMask(pDevice, ReceiveMask);
- }
-}
-
-static void
-bcm5700_poll_wait(UM_DEVICE_BLOCK *pUmDevice)
-{
-#ifdef BCM_NAPI_RXPOLL
- while (pUmDevice->lm_dev.RxPoll) {
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(1);
- }
-#endif
-}
-
-
-#ifdef BCM_VLAN
-STATIC void
-bcm5700_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) dev->priv;
-
- bcm5700_intr_off(pUmDevice);
- bcm5700_poll_wait(pUmDevice);
- pUmDevice->vlgrp = vlgrp;
- bcm5700_set_vlan_mode(pUmDevice);
- bcm5700_intr_on(pUmDevice);
-}
-
-STATIC void
-bcm5700_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) dev->priv;
-
- bcm5700_intr_off(pUmDevice);
- bcm5700_poll_wait(pUmDevice);
- if (pUmDevice->vlgrp) {
- pUmDevice->vlgrp->vlan_devices[vid] = NULL;
- }
- bcm5700_intr_on(pUmDevice);
-}
-#endif
-
-STATIC int
-bcm5700_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- PLM_PACKET pPacket;
- PUM_PACKET pUmPacket;
- unsigned long flags = 0;
- int frag_no;
-#ifdef BCM_TSO
- LM_UINT32 mss = 0 ;
- uint16_t ip_tcp_len, tcp_opt_len, tcp_seg_flags;
-#endif
-
- if ((pDevice->LinkStatus == LM_STATUS_LINK_DOWN) ||
- !pDevice->InitDone || pUmDevice->suspended)
- {
- dev_kfree_skb(skb);
- return 0;
- }
-
-#if (LINUX_VERSION_CODE < 0x02032b)
- if (test_and_set_bit(0, &dev->tbusy)) {
- return 1;
- }
-#endif
-
- if (pUmDevice->do_global_lock && pUmDevice->interrupt) {
- netif_stop_queue(dev);
- pUmDevice->tx_queued = 1;
- if (!pUmDevice->interrupt) {
- netif_wake_queue(dev);
- pUmDevice->tx_queued = 0;
- }
- return 1;
- }
-
- pPacket = (PLM_PACKET)
- QQ_PopHead(&pDevice->TxPacketFreeQ.Container);
- if (pPacket == 0) {
- netif_stop_queue(dev);
- pUmDevice->tx_full = 1;
- if (QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container)) {
- netif_wake_queue(dev);
- pUmDevice->tx_full = 0;
- }
- return 1;
- }
- pUmPacket = (PUM_PACKET) pPacket;
- pUmPacket->skbuff = skb;
- pUmDevice->stats.tx_bytes += skb->len;
-
- if (skb->ip_summed == CHECKSUM_HW) {
- pPacket->Flags = SND_BD_FLAG_TCP_UDP_CKSUM;
-#if TIGON3_DEBUG
- pUmDevice->tx_chksum_count++;
-#endif
- }
- else {
- pPacket->Flags = 0;
- }
-#if MAX_SKB_FRAGS
- frag_no = skb_shinfo(skb)->nr_frags;
-#else
- frag_no = 0;
-#endif
- if (atomic_read(&pDevice->SendBdLeft) < (frag_no + 1)) {
- netif_stop_queue(dev);
- pUmDevice->tx_full = 1;
- QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket);
- if (atomic_read(&pDevice->SendBdLeft) >= (frag_no + 1)) {
- netif_wake_queue(dev);
- pUmDevice->tx_full = 0;
- }
- return 1;
- }
-
- pPacket->u.Tx.FragCount = frag_no + 1;
-#if TIGON3_DEBUG
- if (pPacket->u.Tx.FragCount > 1)
- pUmDevice->tx_zc_count++;
-#endif
-
-#ifdef BCM_VLAN
- if (pUmDevice->vlgrp && vlan_tx_tag_present(skb)) {
- pPacket->VlanTag = vlan_tx_tag_get(skb);
- pPacket->Flags |= SND_BD_FLAG_VLAN_TAG;
- }
-#endif
-
-#ifdef BCM_TSO
- if ((mss = (LM_UINT32) skb_shinfo(skb)->tso_size) &&
- (skb->len > pDevice->TxMtu)) {
-
-#if (LINUX_VERSION_CODE >= 0x02060c)
-
- if (skb_header_cloned(skb) &&
- pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
-
- dev_kfree_skb(skb);
- return 0;
- }
-#endif
- pUmDevice->tso_pkt_count++;
-
- pPacket->Flags |= SND_BD_FLAG_CPU_PRE_DMA |
- SND_BD_FLAG_CPU_POST_DMA;
-
- tcp_opt_len = 0;
- if (skb->h.th->doff > 5) {
- tcp_opt_len = (skb->h.th->doff - 5) << 2;
- }
- ip_tcp_len = (skb->nh.iph->ihl << 2) + sizeof(struct tcphdr);
- skb->nh.iph->check = 0;
-
- if ( T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId) ){
- skb->h.th->check = 0;
- pPacket->Flags &= ~SND_BD_FLAG_TCP_UDP_CKSUM;
- }
- else {
- skb->h.th->check = ~csum_tcpudp_magic(
- skb->nh.iph->saddr, skb->nh.iph->daddr,
- 0, IPPROTO_TCP, 0);
- }
-
- skb->nh.iph->tot_len = htons(mss + ip_tcp_len + tcp_opt_len);
- tcp_seg_flags = 0;
-
- if (tcp_opt_len || (skb->nh.iph->ihl > 5)) {
- if ( T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId) ){
- tcp_seg_flags =
- ((skb->nh.iph->ihl - 5) +
- (tcp_opt_len >> 2)) << 11;
- }
- else {
- pPacket->Flags |=
- ((skb->nh.iph->ihl - 5) +
- (tcp_opt_len >> 2)) << 12;
- }
- }
- pPacket->u.Tx.MaxSegmentSize = mss | tcp_seg_flags;
- }
- else
- {
- pPacket->u.Tx.MaxSegmentSize = 0;
- }
-#endif
- BCM5700_LOCK(pUmDevice, flags);
- LM_SendPacket(pDevice, pPacket);
- BCM5700_UNLOCK(pUmDevice, flags);
-
-#if (LINUX_VERSION_CODE < 0x02032b)
- netif_wake_queue(dev);
-#endif
- dev->trans_start = jiffies;
-
-
- return 0;
-}
-
-#ifdef BCM_NAPI_RXPOLL
-STATIC int
-bcm5700_poll(struct net_device *dev, int *budget)
-{
- int orig_budget = *budget;
- int work_done;
- UM_DEVICE_BLOCK *pUmDevice = (UM_DEVICE_BLOCK *) dev->priv;
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
- unsigned long flags = 0;
- LM_UINT32 tag;
-
- if (orig_budget > dev->quota)
- orig_budget = dev->quota;
-
- BCM5700_LOCK(pUmDevice, flags);
- /* BCM4785: Flush posted writes from GbE to host memory. */
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- REG_RD(pDevice, HostCoalesce.Mode);
- work_done = LM_ServiceRxPoll(pDevice, orig_budget);
- *budget -= work_done;
- dev->quota -= work_done;
-
- if (QQ_GetEntryCnt(&pUmDevice->rx_out_of_buf_q.Container)) {
- replenish_rx_buffers(pUmDevice, 0);
- }
- BCM5700_UNLOCK(pUmDevice, flags);
- if (work_done) {
- MM_IndicateRxPackets(pDevice);
- BCM5700_LOCK(pUmDevice, flags);
- LM_QueueRxPackets(pDevice);
- BCM5700_UNLOCK(pUmDevice, flags);
- }
- if ((work_done < orig_budget) || atomic_read(&pUmDevice->intr_sem) ||
- pUmDevice->suspended) {
-
- netif_rx_complete(dev);
- BCM5700_LOCK(pUmDevice, flags);
- REG_WR(pDevice, Grc.Mode, pDevice->GrcMode);
- pDevice->RxPoll = FALSE;
- if (pDevice->RxPoll) {
- BCM5700_UNLOCK(pUmDevice, flags);
- return 0;
- }
- /* Take care of possible missed rx interrupts */
- REG_RD_BACK(pDevice, Grc.Mode); /* flush the register write */
- tag = pDevice->pStatusBlkVirt->StatusTag;
- if ((pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) ||
- (pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx !=
- pDevice->RcvRetConIdx)) {
-
- REG_WR(pDevice, HostCoalesce.Mode,
- pDevice->CoalesceMode | HOST_COALESCE_ENABLE |
- HOST_COALESCE_NOW);
- }
- /* If a new status block is pending in the WDMA state machine */
- /* before the register write to enable the rx interrupt, */
- /* the new status block may DMA with no interrupt. In this */
- /* scenario, the tag read above will be older than the tag in */
- /* the pending status block and writing the older tag will */
- /* cause interrupt to be generated. */
- else if (pDevice->Flags & USE_TAGGED_STATUS_FLAG) {
- MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low,
- tag << 24);
- /* Make sure we service tx in case some tx interrupts */
- /* are cleared */
- if (atomic_read(&pDevice->SendBdLeft) <
- (T3_SEND_RCB_ENTRY_COUNT / 2)) {
- REG_WR(pDevice, HostCoalesce.Mode,
- pDevice->CoalesceMode |
- HOST_COALESCE_ENABLE |
- HOST_COALESCE_NOW);
- }
- }
- BCM5700_UNLOCK(pUmDevice, flags);
- return 0;
- }
- return 1;
-}
-#endif /* BCM_NAPI_RXPOLL */
-
-STATIC irqreturn_t
-bcm5700_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
-{
- struct net_device *dev = (struct net_device *)dev_instance;
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- LM_UINT32 oldtag, newtag;
- int i, max_intr_loop;
-#ifdef BCM_TASKLET
- int repl_buf_count;
-#endif
- unsigned int handled = 1;
-
- if (!pDevice->InitDone) {
- handled = 0;
- return IRQ_RETVAL(handled);
- }
-
- bcm5700_intr_lock(pUmDevice);
- if (atomic_read(&pUmDevice->intr_sem)) {
- MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 1);
- bcm5700_intr_unlock(pUmDevice);
- handled = 0;
- return IRQ_RETVAL(handled);
- }
-
- if (test_and_set_bit(0, (void*)&pUmDevice->interrupt)) {
- printk(KERN_ERR "%s: Duplicate entry of the interrupt handler\n",
- dev->name);
- bcm5700_intr_unlock(pUmDevice);
- handled = 0;
- return IRQ_RETVAL(handled);
- }
-
- /* BCM4785: Flush posted writes from GbE to host memory. */
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- REG_RD(pDevice, HostCoalesce.Mode);
-
- if ((pDevice->Flags & USING_MSI_FLAG) ||
- (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) ||
- !(REG_RD(pDevice,PciCfg.PciState) & T3_PCI_STATE_INTERRUPT_NOT_ACTIVE) )
- {
-
- if (pUmDevice->intr_test) {
- if (!(REG_RD(pDevice, PciCfg.PciState) &
- T3_PCI_STATE_INTERRUPT_NOT_ACTIVE) ||
- pDevice->Flags & USING_MSI_FLAG ) {
- pUmDevice->intr_test_result = 1;
- }
- pUmDevice->intr_test = 0;
- }
-
-#ifdef BCM_NAPI_RXPOLL
- max_intr_loop = 1;
-#else
- max_intr_loop = 50;
-#endif
- if (pDevice->Flags & USE_TAGGED_STATUS_FLAG) {
- MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 1);
- oldtag = pDevice->pStatusBlkVirt->StatusTag;
-
- for (i = 0; ; i++) {
- pDevice->pStatusBlkVirt->Status &= ~STATUS_BLOCK_UPDATED;
-
- LM_ServiceInterrupts(pDevice);
- /* BCM4785: Flush GbE posted writes to host memory. */
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- MB_REG_RD(pDevice, Mailbox.Interrupt[0].Low);
- newtag = pDevice->pStatusBlkVirt->StatusTag;
- if ((newtag == oldtag) || (i > max_intr_loop)) {
- MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, oldtag << 24);
- pDevice->LastTag = oldtag;
- if (pDevice->Flags & UNDI_FIX_FLAG) {
- REG_WR(pDevice, Grc.LocalCtrl,
- pDevice->GrcLocalCtrl | 0x2);
- }
- break;
- }
- oldtag = newtag;
- }
- }
- else
- {
- i = 0;
- do {
- uint dummy;
-
- MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 1);
- pDevice->pStatusBlkVirt->Status &= ~STATUS_BLOCK_UPDATED;
- LM_ServiceInterrupts(pDevice);
- MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 0);
- dummy = MB_REG_RD(pDevice, Mailbox.Interrupt[0].Low);
- i++;
- }
- while ((pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) &&
- (i < max_intr_loop));
-
- if (pDevice->Flags & UNDI_FIX_FLAG) {
- REG_WR(pDevice, Grc.LocalCtrl,
- pDevice->GrcLocalCtrl | 0x2);
- }
- }
- }
- else
- {
- /* not my interrupt */
- handled = 0;
- }
-
-#ifdef BCM_TASKLET
- repl_buf_count = QQ_GetEntryCnt(&pUmDevice->rx_out_of_buf_q.Container);
- if (((repl_buf_count > pUmDevice->rx_buf_repl_panic_thresh) ||
- pDevice->QueueAgain) &&
- (!test_and_set_bit(0, &pUmDevice->tasklet_busy))) {
-
- replenish_rx_buffers(pUmDevice, pUmDevice->rx_buf_repl_isr_limit);
- clear_bit(0, (void*)&pUmDevice->tasklet_busy);
- }
- else if ((repl_buf_count > pUmDevice->rx_buf_repl_thresh) &&
- !pUmDevice->tasklet_pending) {
-
- pUmDevice->tasklet_pending = 1;
- tasklet_schedule(&pUmDevice->tasklet);
- }
-#else
-#ifdef BCM_NAPI_RXPOLL
- if (!pDevice->RxPoll &&
- QQ_GetEntryCnt(&pUmDevice->rx_out_of_buf_q.Container)) {
- pDevice->RxPoll = 1;
- MM_ScheduleRxPoll(pDevice);
- }
-#else
- if (QQ_GetEntryCnt(&pUmDevice->rx_out_of_buf_q.Container)) {
- replenish_rx_buffers(pUmDevice, 0);
- }
-
- if (QQ_GetEntryCnt(&pDevice->RxPacketFreeQ.Container) ||
- pDevice->QueueAgain) {
-
- LM_QueueRxPackets(pDevice);
- }
-#endif
-#endif
-
- clear_bit(0, (void*)&pUmDevice->interrupt);
- bcm5700_intr_unlock(pUmDevice);
- if (pUmDevice->tx_queued) {
- pUmDevice->tx_queued = 0;
- netif_wake_queue(dev);
- }
- return IRQ_RETVAL(handled);
-}
-
-
-#ifdef BCM_TASKLET
-STATIC void
-bcm5700_tasklet(unsigned long data)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)data;
- unsigned long flags = 0;
-
- /* RH 7.2 Beta 3 tasklets are reentrant */
- if (test_and_set_bit(0, &pUmDevice->tasklet_busy)) {
- pUmDevice->tasklet_pending = 0;
- return;
- }
-
- pUmDevice->tasklet_pending = 0;
- if (pUmDevice->opened && !pUmDevice->suspended) {
- BCM5700_LOCK(pUmDevice, flags);
- replenish_rx_buffers(pUmDevice, 0);
- BCM5700_UNLOCK(pUmDevice, flags);
- }
-
- clear_bit(0, &pUmDevice->tasklet_busy);
-}
-#endif
-
-STATIC int
-bcm5700_close(struct net_device *dev)
-{
-
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
-
-#if (LINUX_VERSION_CODE < 0x02032b)
- dev->start = 0;
-#endif
- netif_stop_queue(dev);
- pUmDevice->opened = 0;
-
-#ifdef BCM_ASF
- if( !(pDevice->AsfFlags & ASF_ENABLED) )
-#endif
-#ifdef BCM_WOL
- if( enable_wol[pUmDevice->index] == 0 )
-#endif
- B57_INFO(("%s: %s NIC Link is DOWN\n", bcm5700_driver, dev->name));
-
- if (tigon3_debug > 1)
- printk(KERN_DEBUG "%s: Shutting down Tigon3\n",
- dev->name);
-
- LM_MulticastClear(pDevice);
- bcm5700_shutdown(pUmDevice);
-
- if (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId)) {
- del_timer_sync(&pUmDevice->statstimer);
- }
-
- del_timer_sync(&pUmDevice->timer);
-
- free_irq(pUmDevice->pdev->irq, dev);
-
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_PCI_USE_VECTOR)
-
- if(pDevice->Flags & USING_MSI_FLAG) {
- pci_disable_msi(pUmDevice->pdev);
- REG_WR(pDevice, Msi.Mode, 1 );
- pDevice->Flags &= ~USING_MSI_FLAG;
- }
-
-#endif
-
-
-#if (LINUX_VERSION_CODE < 0x020300)
- MOD_DEC_USE_COUNT;
-#endif
- {
- /* BCM4785: Don't go to low-power state because it will power down the smbus block. */
- if (!(pDevice->Flags & SB_CORE_FLAG))
- LM_SetPowerState(pDevice, LM_POWER_STATE_D3);
- }
-
- bcm5700_freemem(dev);
-
- QQ_InitQueue(&pDevice->RxPacketFreeQ.Container,
- MAX_RX_PACKET_DESC_COUNT);
-
- return 0;
-}
-
-STATIC int
-bcm5700_freemem(struct net_device *dev)
-{
- int i;
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
-
- for (i = 0; i < pUmDevice->mem_list_num; i++) {
- if (pUmDevice->mem_size_list[i] == 0) {
- kfree(pUmDevice->mem_list[i]);
- }
- else {
- pci_free_consistent(pUmDevice->pdev,
- (size_t) pUmDevice->mem_size_list[i],
- pUmDevice->mem_list[i],
- pUmDevice->dma_list[i]);
- }
- }
-
- pDevice->pStatusBlkVirt = 0;
- pDevice->pStatsBlkVirt = 0;
- pUmDevice->mem_list_num = 0;
-
- return 0;
-}
-
-uint64_t
-bcm5700_crc_count(PUM_DEVICE_BLOCK pUmDevice)
-{
- PLM_DEVICE_BLOCK pDevice = &pUmDevice->lm_dev;
- LM_UINT32 Value32;
- PT3_STATS_BLOCK pStats = (PT3_STATS_BLOCK) pDevice->pStatsBlkVirt;
- unsigned long flags;
-
- if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) &&
- !(pDevice->TbiFlags & ENABLE_TBI_FLAG)) {
-
- if (!pUmDevice->opened || !pDevice->InitDone)
- {
-
- return 0;
- }
-
- /* regulate MDIO access during run time */
- if (pUmDevice->crc_counter_expiry > 0)
- return pUmDevice->phy_crc_count;
-
- pUmDevice->crc_counter_expiry = (5 * HZ) /
- pUmDevice->timer_interval;
-
- BCM5700_PHY_LOCK(pUmDevice, flags);
- LM_ReadPhy(pDevice, 0x1e, &Value32);
- if ((Value32 & 0x8000) == 0)
- LM_WritePhy(pDevice, 0x1e, Value32 | 0x8000);
- LM_ReadPhy(pDevice, 0x14, &Value32);
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
- /* Sometimes data on the MDIO bus can be corrupted */
- if (Value32 != 0xffff)
- pUmDevice->phy_crc_count += Value32;
- return pUmDevice->phy_crc_count;
- }
- else if (pStats == 0) {
- return 0;
- }
- else {
- return (MM_GETSTATS64(pStats->dot3StatsFCSErrors));
- }
-}
-
-uint64_t
-bcm5700_rx_err_count(UM_DEVICE_BLOCK *pUmDevice)
-{
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
- T3_STATS_BLOCK *pStats = (T3_STATS_BLOCK *) pDevice->pStatsBlkVirt;
-
- if (pStats == 0)
- return 0;
- return (bcm5700_crc_count(pUmDevice) +
- MM_GETSTATS64(pStats->dot3StatsAlignmentErrors) +
- MM_GETSTATS64(pStats->etherStatsUndersizePkts) +
- MM_GETSTATS64(pStats->etherStatsFragments) +
- MM_GETSTATS64(pStats->dot3StatsFramesTooLong) +
- MM_GETSTATS64(pStats->etherStatsJabbers));
-}
-
-STATIC struct net_device_stats *
-bcm5700_get_stats(struct net_device *dev)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- PT3_STATS_BLOCK pStats = (PT3_STATS_BLOCK) pDevice->pStatsBlkVirt;
- struct net_device_stats *p_netstats = &pUmDevice->stats;
-
- if (pStats == 0)
- return p_netstats;
-
- /* Get stats from LM */
- p_netstats->rx_packets =
- MM_GETSTATS(pStats->ifHCInUcastPkts) +
- MM_GETSTATS(pStats->ifHCInMulticastPkts) +
- MM_GETSTATS(pStats->ifHCInBroadcastPkts);
- p_netstats->tx_packets =
- MM_GETSTATS(pStats->ifHCOutUcastPkts) +
- MM_GETSTATS(pStats->ifHCOutMulticastPkts) +
- MM_GETSTATS(pStats->ifHCOutBroadcastPkts);
- /* There counters seem to be innacurate. Use byte number accumulation
- instead.
- p_netstats->rx_bytes = MM_GETSTATS(pStats->ifHCInOctets);
- p_netstats->tx_bytes = MM_GETSTATS(pStats->ifHCOutOctets);
- */
- p_netstats->tx_errors =
- MM_GETSTATS(pStats->dot3StatsInternalMacTransmitErrors) +
- MM_GETSTATS(pStats->dot3StatsCarrierSenseErrors) +
- MM_GETSTATS(pStats->ifOutDiscards) +
- MM_GETSTATS(pStats->ifOutErrors);
- p_netstats->multicast = MM_GETSTATS(pStats->ifHCInMulticastPkts);
- p_netstats->collisions = MM_GETSTATS(pStats->etherStatsCollisions);
- p_netstats->rx_length_errors =
- MM_GETSTATS(pStats->dot3StatsFramesTooLong) +
- MM_GETSTATS(pStats->etherStatsUndersizePkts);
- p_netstats->rx_over_errors = MM_GETSTATS(pStats->nicNoMoreRxBDs);
- p_netstats->rx_frame_errors =
- MM_GETSTATS(pStats->dot3StatsAlignmentErrors);
- p_netstats->rx_crc_errors = (unsigned long)
- bcm5700_crc_count(pUmDevice);
- p_netstats->rx_errors = (unsigned long)
- bcm5700_rx_err_count(pUmDevice);
-
- p_netstats->tx_aborted_errors = MM_GETSTATS(pStats->ifOutDiscards);
- p_netstats->tx_carrier_errors =
- MM_GETSTATS(pStats->dot3StatsCarrierSenseErrors);
-
- return p_netstats;
-}
-
-void
-b57_suspend_chip(UM_DEVICE_BLOCK *pUmDevice)
-{
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
-
- if (pUmDevice->opened) {
- bcm5700_intr_off(pUmDevice);
- netif_carrier_off(pUmDevice->dev);
- netif_stop_queue(pUmDevice->dev);
-#ifdef BCM_TASKLET
- tasklet_kill(&pUmDevice->tasklet);
-#endif
- bcm5700_poll_wait(pUmDevice);
- }
- pUmDevice->suspended = 1;
- LM_ShutdownChip(pDevice, LM_SUSPEND_RESET);
-}
-
-void
-b57_resume_chip(UM_DEVICE_BLOCK *pUmDevice)
-{
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
-
- if (pUmDevice->suspended) {
- pUmDevice->suspended = 0;
- if (pUmDevice->opened) {
- bcm5700_reset(pUmDevice->dev);
- }
- else {
- LM_ShutdownChip(pDevice, LM_SHUTDOWN_RESET);
- }
- }
-}
-
-/* Returns 0 on failure, 1 on success */
-int
-b57_test_intr(UM_DEVICE_BLOCK *pUmDevice)
-{
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
- int j;
-
- if (!pUmDevice->opened)
- return 0;
- pUmDevice->intr_test_result = 0;
- pUmDevice->intr_test = 1;
-
- REG_WR(pDevice, HostCoalesce.Mode,
- pDevice->CoalesceMode | HOST_COALESCE_ENABLE |
- HOST_COALESCE_NOW);
-
- for (j = 0; j < 10; j++) {
- if (pUmDevice->intr_test_result){
- break;
- }
-
- REG_WR(pDevice, HostCoalesce.Mode,
- pDevice->CoalesceMode | HOST_COALESCE_ENABLE |
- HOST_COALESCE_NOW);
-
- MM_Sleep(pDevice, 1);
- }
-
- return pUmDevice->intr_test_result;
-
-}
-
-#ifdef SIOCETHTOOL
-
-#ifdef ETHTOOL_GSTRINGS
-
-#define ETH_NUM_STATS 30
-#define RX_CRC_IDX 5
-#define RX_MAC_ERR_IDX 14
-
-struct {
- char string[ETH_GSTRING_LEN];
-} bcm5700_stats_str_arr[ETH_NUM_STATS] = {
- { "rx_unicast_packets" },
- { "rx_multicast_packets" },
- { "rx_broadcast_packets" },
- { "rx_bytes" },
- { "rx_fragments" },
- { "rx_crc_errors" }, /* this needs to be calculated */
- { "rx_align_errors" },
- { "rx_xon_frames" },
- { "rx_xoff_frames" },
- { "rx_long_frames" },
- { "rx_short_frames" },
- { "rx_jabber" },
- { "rx_discards" },
- { "rx_errors" },
- { "rx_mac_errors" }, /* this needs to be calculated */
- { "tx_unicast_packets" },
- { "tx_multicast_packets" },
- { "tx_broadcast_packets" },
- { "tx_bytes" },
- { "tx_deferred" },
- { "tx_single_collisions" },
- { "tx_multi_collisions" },
- { "tx_total_collisions" },
- { "tx_excess_collisions" },
- { "tx_late_collisions" },
- { "tx_xon_frames" },
- { "tx_xoff_frames" },
- { "tx_internal_mac_errors" },
- { "tx_carrier_errors" },
- { "tx_errors" },
-};
-
-#define STATS_OFFSET(offset_name) ((OFFSETOF(T3_STATS_BLOCK, offset_name)) / sizeof(uint64_t))
-
-#ifdef __BIG_ENDIAN
-#define SWAP_DWORD_64(x) (x)
-#else
-#define SWAP_DWORD_64(x) ((x << 32) | (x >> 32))
-#endif
-
-unsigned long bcm5700_stats_offset_arr[ETH_NUM_STATS] = {
- STATS_OFFSET(ifHCInUcastPkts),
- STATS_OFFSET(ifHCInMulticastPkts),
- STATS_OFFSET(ifHCInBroadcastPkts),
- STATS_OFFSET(ifHCInOctets),
- STATS_OFFSET(etherStatsFragments),
- 0,
- STATS_OFFSET(dot3StatsAlignmentErrors),
- STATS_OFFSET(xonPauseFramesReceived),
- STATS_OFFSET(xoffPauseFramesReceived),
- STATS_OFFSET(dot3StatsFramesTooLong),
- STATS_OFFSET(etherStatsUndersizePkts),
- STATS_OFFSET(etherStatsJabbers),
- STATS_OFFSET(ifInDiscards),
- STATS_OFFSET(ifInErrors),
- 0,
- STATS_OFFSET(ifHCOutUcastPkts),
- STATS_OFFSET(ifHCOutMulticastPkts),
- STATS_OFFSET(ifHCOutBroadcastPkts),
- STATS_OFFSET(ifHCOutOctets),
- STATS_OFFSET(dot3StatsDeferredTransmissions),
- STATS_OFFSET(dot3StatsSingleCollisionFrames),
- STATS_OFFSET(dot3StatsMultipleCollisionFrames),
- STATS_OFFSET(etherStatsCollisions),
- STATS_OFFSET(dot3StatsExcessiveCollisions),
- STATS_OFFSET(dot3StatsLateCollisions),
- STATS_OFFSET(outXonSent),
- STATS_OFFSET(outXoffSent),
- STATS_OFFSET(dot3StatsInternalMacTransmitErrors),
- STATS_OFFSET(dot3StatsCarrierSenseErrors),
- STATS_OFFSET(ifOutErrors),
-};
-
-#endif /* ETHTOOL_GSTRINGS */
-
-
-#ifdef ETHTOOL_GREGS
-#if (LINUX_VERSION_CODE >= 0x02040f)
-static void
-bcm5700_get_reg_blk(UM_DEVICE_BLOCK *pUmDevice, u32 **buf, u32 start, u32 end,
- int reserved)
-{
- u32 offset;
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
-
- if (reserved) {
- memset(*buf, 0, end - start);
- *buf = *buf + (end - start)/4;
- return;
- }
- for (offset = start; offset < end; offset+=4, *buf = *buf + 1) {
- if (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId)){
- if (((offset >= 0x3400) && (offset < 0x3c00)) ||
- ((offset >= 0x5400) && (offset < 0x5800)) ||
- ((offset >= 0x6400) && (offset < 0x6800))) {
- **buf = 0;
- continue;
- }
- }
- **buf = REG_RD_OFFSET(pDevice, offset);
- }
-}
-#endif
-#endif
-
-static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
-{
- struct ethtool_cmd ethcmd;
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
-
- if (mm_copy_from_user(ðcmd, useraddr, sizeof(ethcmd)))
- return -EFAULT;
-
- switch (ethcmd.cmd) {
-#ifdef ETHTOOL_GDRVINFO
- case ETHTOOL_GDRVINFO: {
- struct ethtool_drvinfo info = {ETHTOOL_GDRVINFO};
-
- strcpy(info.driver, bcm5700_driver);
-#ifdef INCLUDE_5701_AX_FIX
- if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0) {
- extern int t3FwReleaseMajor;
- extern int t3FwReleaseMinor;
- extern int t3FwReleaseFix;
-
- sprintf(info.fw_version, "%i.%i.%i",
- t3FwReleaseMajor, t3FwReleaseMinor,
- t3FwReleaseFix);
- }
-#endif
- strcpy(info.fw_version, pDevice->BootCodeVer);
- strcpy(info.version, bcm5700_version);
-#if (LINUX_VERSION_CODE <= 0x020422)
- strcpy(info.bus_info, pUmDevice->pdev->slot_name);
-#else
- strcpy(info.bus_info, pci_name(pUmDevice->pdev));
-#endif
-
-
-
-#ifdef ETHTOOL_GEEPROM
- BCM_EEDUMP_LEN(&info, pDevice->NvramSize);
-#endif
-#ifdef ETHTOOL_GREGS
- /* dump everything, including holes in the register space */
- info.regdump_len = 0x6c00;
-#endif
-#ifdef ETHTOOL_GSTATS
- info.n_stats = ETH_NUM_STATS;
-#endif
- if (mm_copy_to_user(useraddr, &info, sizeof(info)))
- return -EFAULT;
- return 0;
- }
-#endif
- case ETHTOOL_GSET: {
- if ((pDevice->TbiFlags & ENABLE_TBI_FLAG)||
- (pDevice->PhyFlags & PHY_IS_FIBER)) {
- ethcmd.supported =
- (SUPPORTED_1000baseT_Full |
- SUPPORTED_Autoneg);
- ethcmd.supported |= SUPPORTED_FIBRE;
- ethcmd.port = PORT_FIBRE;
- } else {
- ethcmd.supported =
- (SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Half |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_Autoneg);
- ethcmd.supported |= SUPPORTED_TP;
- ethcmd.port = PORT_TP;
- }
-
- ethcmd.transceiver = XCVR_INTERNAL;
- ethcmd.phy_address = 0;
-
- if (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS)
- ethcmd.speed = SPEED_1000;
- else if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS)
- ethcmd.speed = SPEED_100;
- else if (pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)
- ethcmd.speed = SPEED_10;
- else
- ethcmd.speed = 0;
-
- if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL)
- ethcmd.duplex = DUPLEX_FULL;
- else
- ethcmd.duplex = DUPLEX_HALF;
-
- if (pDevice->DisableAutoNeg == FALSE) {
- ethcmd.autoneg = AUTONEG_ENABLE;
- ethcmd.advertising = ADVERTISED_Autoneg;
- if ((pDevice->TbiFlags & ENABLE_TBI_FLAG) ||
- (pDevice->PhyFlags & PHY_IS_FIBER)) {
- ethcmd.advertising |=
- ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE;
- }
- else {
- ethcmd.advertising |=
- ADVERTISED_TP;
- if (pDevice->advertising &
- PHY_AN_AD_10BASET_HALF) {
-
- ethcmd.advertising |=
- ADVERTISED_10baseT_Half;
- }
- if (pDevice->advertising &
- PHY_AN_AD_10BASET_FULL) {
-
- ethcmd.advertising |=
- ADVERTISED_10baseT_Full;
- }
- if (pDevice->advertising &
- PHY_AN_AD_100BASETX_HALF) {
-
- ethcmd.advertising |=
- ADVERTISED_100baseT_Half;
- }
- if (pDevice->advertising &
- PHY_AN_AD_100BASETX_FULL) {
-
- ethcmd.advertising |=
- ADVERTISED_100baseT_Full;
- }
- if (pDevice->advertising1000 &
- BCM540X_AN_AD_1000BASET_HALF) {
-
- ethcmd.advertising |=
- ADVERTISED_1000baseT_Half;
- }
- if (pDevice->advertising1000 &
- BCM540X_AN_AD_1000BASET_FULL) {
-
- ethcmd.advertising |=
- ADVERTISED_1000baseT_Full;
- }
- }
- }
- else {
- ethcmd.autoneg = AUTONEG_DISABLE;
- ethcmd.advertising = 0;
- }
-
- ethcmd.maxtxpkt = pDevice->TxMaxCoalescedFrames;
- ethcmd.maxrxpkt = pDevice->RxMaxCoalescedFrames;
-
- if(mm_copy_to_user(useraddr, ðcmd, sizeof(ethcmd)))
- return -EFAULT;
- return 0;
- }
- case ETHTOOL_SSET: {
- unsigned long flags;
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (ethcmd.autoneg == AUTONEG_ENABLE) {
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_AUTO;
- pDevice->RequestedDuplexMode = LM_DUPLEX_MODE_UNKNOWN;
- pDevice->DisableAutoNeg = FALSE;
- }
- else {
- if (ethcmd.speed == SPEED_1000 &&
- pDevice->PhyFlags & PHY_NO_GIGABIT)
- return -EINVAL;
-
- if (ethcmd.speed == SPEED_1000 &&
- (pDevice->TbiFlags & ENABLE_TBI_FLAG ||
- pDevice->PhyFlags & PHY_IS_FIBER ) ) {
-
- pDevice->RequestedLineSpeed =
- LM_LINE_SPEED_1000MBPS;
-
- pDevice->RequestedDuplexMode =
- LM_DUPLEX_MODE_FULL;
- }
- else if (ethcmd.speed == SPEED_100 &&
- !(pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
- !(pDevice->PhyFlags & PHY_IS_FIBER)) {
-
- pDevice->RequestedLineSpeed =
- LM_LINE_SPEED_100MBPS;
- }
- else if (ethcmd.speed == SPEED_10 &&
- !(pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
- !(pDevice->PhyFlags & PHY_IS_FIBER)) {
-
- pDevice->RequestedLineSpeed =
- LM_LINE_SPEED_10MBPS;
- }
- else {
- return -EINVAL;
- }
-
- pDevice->DisableAutoNeg = TRUE;
- if (ethcmd.duplex == DUPLEX_FULL) {
- pDevice->RequestedDuplexMode =
- LM_DUPLEX_MODE_FULL;
- }
- else {
- if (!(pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
- !(pDevice->PhyFlags & PHY_IS_FIBER) ) {
-
- pDevice->RequestedDuplexMode =
- LM_DUPLEX_MODE_HALF;
- }
- }
- }
- if (netif_running(dev)) {
- BCM5700_PHY_LOCK(pUmDevice, flags);
- LM_SetupPhy(pDevice);
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
- }
- return 0;
- }
-#ifdef ETHTOOL_GWOL
-#ifdef BCM_WOL
- case ETHTOOL_GWOL: {
- struct ethtool_wolinfo wol = {ETHTOOL_GWOL};
-
- if (((pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
- !(pDevice->Flags & FIBER_WOL_CAPABLE_FLAG)) ||
- (pDevice->Flags & DISABLE_D3HOT_FLAG)) {
- wol.supported = 0;
- wol.wolopts = 0;
- }
- else {
- wol.supported = WAKE_MAGIC;
- if (pDevice->WakeUpMode == LM_WAKE_UP_MODE_MAGIC_PACKET)
- {
- wol.wolopts = WAKE_MAGIC;
- }
- else {
- wol.wolopts = 0;
- }
- }
- if (mm_copy_to_user(useraddr, &wol, sizeof(wol)))
- return -EFAULT;
- return 0;
- }
- case ETHTOOL_SWOL: {
- struct ethtool_wolinfo wol;
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (mm_copy_from_user(&wol, useraddr, sizeof(wol)))
- return -EFAULT;
- if ((((pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
- !(pDevice->Flags & FIBER_WOL_CAPABLE_FLAG)) ||
- (pDevice->Flags & DISABLE_D3HOT_FLAG)) &&
- wol.wolopts) {
- return -EINVAL;
- }
-
- if ((wol.wolopts & ~WAKE_MAGIC) != 0) {
- return -EINVAL;
- }
- if (wol.wolopts & WAKE_MAGIC) {
- pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_MAGIC_PACKET;
- pDevice->WakeUpMode = LM_WAKE_UP_MODE_MAGIC_PACKET;
- }
- else {
- pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_NONE;
- pDevice->WakeUpMode = LM_WAKE_UP_MODE_NONE;
- }
- return 0;
- }
-#endif
-#endif
-#ifdef ETHTOOL_GLINK
- case ETHTOOL_GLINK: {
- struct ethtool_value edata = {ETHTOOL_GLINK};
-
- /* ifup only waits for 5 seconds for link up */
- /* NIC may take more than 5 seconds to establish link */
- if ((pUmDevice->delayed_link_ind > 0) &&
- delay_link[pUmDevice->index])
- return -EOPNOTSUPP;
-
- if (pDevice->LinkStatus == LM_STATUS_LINK_ACTIVE) {
- edata.data = 1;
- }
- else {
- edata.data = 0;
- }
- if (mm_copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
- return 0;
- }
-#endif
-#ifdef ETHTOOL_NWAY_RST
- case ETHTOOL_NWAY_RST: {
- LM_UINT32 phyctrl;
- unsigned long flags;
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (pDevice->DisableAutoNeg) {
- return -EINVAL;
- }
- if (!netif_running(dev))
- return -EAGAIN;
- BCM5700_PHY_LOCK(pUmDevice, flags);
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG) {
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_1000MBPS;
- pDevice->DisableAutoNeg = TRUE;
- LM_SetupPhy(pDevice);
-
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_AUTO;
- pDevice->DisableAutoNeg = FALSE;
- LM_SetupPhy(pDevice);
- }
- else {
- if ((T3_ASIC_REV(pDevice->ChipRevId) ==
- T3_ASIC_REV_5703) ||
- (T3_ASIC_REV(pDevice->ChipRevId) ==
- T3_ASIC_REV_5704) ||
- (T3_ASIC_REV(pDevice->ChipRevId) ==
- T3_ASIC_REV_5705))
- {
- LM_ResetPhy(pDevice);
- LM_SetupPhy(pDevice);
- }
- pDevice->PhyFlags &= ~PHY_FIBER_FALLBACK;
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &phyctrl);
- LM_WritePhy(pDevice, PHY_CTRL_REG, phyctrl |
- PHY_CTRL_AUTO_NEG_ENABLE |
- PHY_CTRL_RESTART_AUTO_NEG);
- }
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
- return 0;
- }
-#endif
-#ifdef ETHTOOL_GEEPROM
- case ETHTOOL_GEEPROM: {
- struct ethtool_eeprom eeprom;
- LM_UINT32 *buf = 0;
- LM_UINT32 buf1[64/4];
- int i, j, offset, len;
-
- if (mm_copy_from_user(&eeprom, useraddr, sizeof(eeprom)))
- return -EFAULT;
-
- if (eeprom.offset >= pDevice->NvramSize)
- return -EFAULT;
-
- /* maximum data limited */
- /* to read more, call again with a different offset */
- if (eeprom.len > 0x800) {
- eeprom.len = 0x800;
- if (mm_copy_to_user(useraddr, &eeprom, sizeof(eeprom)))
- return -EFAULT;
- }
-
- if (eeprom.len > 64) {
- buf = kmalloc(eeprom.len, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- }
- else {
- buf = buf1;
- }
- useraddr += offsetof(struct ethtool_eeprom, data);
-
- offset = eeprom.offset;
- len = eeprom.len;
- if (offset & 3) {
- offset &= 0xfffffffc;
- len += (offset & 3);
- }
- len = (len + 3) & 0xfffffffc;
- for (i = 0, j = 0; j < len; i++, j += 4) {
- if (LM_NvramRead(pDevice, offset + j, buf + i) !=
- LM_STATUS_SUCCESS) {
- break;
- }
- }
- if (j >= len) {
- buf += (eeprom.offset & 3);
- i = mm_copy_to_user(useraddr, buf, eeprom.len);
- }
- if (eeprom.len > 64) {
- kfree(buf);
- }
- if ((j < len) || i)
- return -EFAULT;
- return 0;
- }
- case ETHTOOL_SEEPROM: {
- struct ethtool_eeprom eeprom;
- LM_UINT32 buf[64/4];
- int i, offset, len;
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (mm_copy_from_user(&eeprom, useraddr, sizeof(eeprom)))
- return -EFAULT;
-
- if ((eeprom.offset & 3) || (eeprom.len & 3) ||
- (eeprom.offset >= pDevice->NvramSize)) {
- return -EFAULT;
- }
-
- if ((eeprom.offset + eeprom.len) >= pDevice->NvramSize) {
- eeprom.len = pDevice->NvramSize - eeprom.offset;
- }
-
- useraddr += offsetof(struct ethtool_eeprom, data);
-
- len = eeprom.len;
- offset = eeprom.offset;
- for (; len > 0; ) {
- if (len < 64)
- i = len;
- else
- i = 64;
- if (mm_copy_from_user(&buf, useraddr, i))
- return -EFAULT;
-
- bcm5700_intr_off(pUmDevice);
- /* Prevent race condition on Grc.Mode register */
- bcm5700_poll_wait(pUmDevice);
-
- if (LM_NvramWriteBlock(pDevice, offset, buf, i/4) !=
- LM_STATUS_SUCCESS) {
- bcm5700_intr_on(pUmDevice);
- return -EFAULT;
- }
- bcm5700_intr_on(pUmDevice);
- len -= i;
- offset += i;
- useraddr += i;
- }
- return 0;
- }
-#endif
-#ifdef ETHTOOL_GREGS
-#if (LINUX_VERSION_CODE >= 0x02040f)
- case ETHTOOL_GREGS: {
- struct ethtool_regs eregs;
- LM_UINT32 *buf, *buf1;
- unsigned int i;
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (pDevice->Flags & UNDI_FIX_FLAG)
- return -EOPNOTSUPP;
- if (mm_copy_from_user(&eregs, useraddr, sizeof(eregs)))
- return -EFAULT;
- if (eregs.len > 0x6c00)
- eregs.len = 0x6c00;
- eregs.version = 0x0;
- if (mm_copy_to_user(useraddr, &eregs, sizeof(eregs)))
- return -EFAULT;
- buf = buf1 = kmalloc(eregs.len, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- bcm5700_get_reg_blk(pUmDevice, &buf, 0, 0xb0, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0xb0, 0x200, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x200, 0x8f0, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x8f0, 0xc00, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0xc00, 0xce0, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0xce0, 0x1000, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x1000, 0x1004, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x1004, 0x1400, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x1400, 0x1480, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x1480, 0x1800, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x1800, 0x1848, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x1848, 0x1c00, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x1c00, 0x1c04, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x1c04, 0x2000, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x2000, 0x225c, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x225c, 0x2400, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x2400, 0x24c4, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x24c4, 0x2800, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x2800, 0x2804, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x2804, 0x2c00, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x2c00, 0x2c20, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x2c20, 0x3000, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x3000, 0x3014, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x3014, 0x3400, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x3400, 0x3408, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x3408, 0x3800, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x3800, 0x3808, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x3808, 0x3c00, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x3c00, 0x3d00, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x3d00, 0x4000, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x4000, 0x4010, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x4010, 0x4400, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x4400, 0x4458, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x4458, 0x4800, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x4800, 0x4808, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x4808, 0x4c00, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x4c00, 0x4c08, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x4c08, 0x5000, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x5000, 0x5050, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x5050, 0x5400, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x5400, 0x5450, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x5450, 0x5800, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x5800, 0x5a10, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x5a10, 0x6000, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x6000, 0x600c, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x600c, 0x6400, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x6400, 0x6404, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x6404, 0x6800, 1);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x6800, 0x6848, 0);
- bcm5700_get_reg_blk(pUmDevice, &buf, 0x6848, 0x6c00, 1);
-
- i = mm_copy_to_user(useraddr + sizeof(eregs), buf1, eregs.len);
- kfree(buf1);
- if (i)
- return -EFAULT;
- return 0;
- }
-#endif
-#endif
-#ifdef ETHTOOL_GPAUSEPARAM
- case ETHTOOL_GPAUSEPARAM: {
- struct ethtool_pauseparam epause = { ETHTOOL_GPAUSEPARAM };
-
- if (!pDevice->DisableAutoNeg) {
- epause.autoneg = (pDevice->FlowControlCap &
- LM_FLOW_CONTROL_AUTO_PAUSE) != 0;
- }
- else {
- epause.autoneg = 0;
- }
- epause.rx_pause =
- (pDevice->FlowControl &
- LM_FLOW_CONTROL_RECEIVE_PAUSE) != 0;
- epause.tx_pause =
- (pDevice->FlowControl &
- LM_FLOW_CONTROL_TRANSMIT_PAUSE) != 0;
- if (mm_copy_to_user(useraddr, &epause, sizeof(epause)))
- return -EFAULT;
-
- return 0;
- }
- case ETHTOOL_SPAUSEPARAM: {
- struct ethtool_pauseparam epause;
- unsigned long flags;
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (mm_copy_from_user(&epause, useraddr, sizeof(epause)))
- return -EFAULT;
- pDevice->FlowControlCap = 0;
- if (epause.autoneg && !pDevice->DisableAutoNeg) {
- pDevice->FlowControlCap |= LM_FLOW_CONTROL_AUTO_PAUSE;
- }
- if (epause.rx_pause) {
- pDevice->FlowControlCap |=
- LM_FLOW_CONTROL_RECEIVE_PAUSE;
- }
- if (epause.tx_pause) {
- pDevice->FlowControlCap |=
- LM_FLOW_CONTROL_TRANSMIT_PAUSE;
- }
- if (netif_running(dev)) {
- BCM5700_PHY_LOCK(pUmDevice, flags);
- LM_SetupPhy(pDevice);
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
- }
-
- return 0;
- }
-#endif
-#ifdef ETHTOOL_GRXCSUM
- case ETHTOOL_GRXCSUM: {
- struct ethtool_value edata = { ETHTOOL_GRXCSUM };
-
- edata.data =
- (pDevice->TaskToOffload &
- LM_TASK_OFFLOAD_RX_TCP_CHECKSUM) != 0;
- if (mm_copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
-
- return 0;
- }
- case ETHTOOL_SRXCSUM: {
- struct ethtool_value edata;
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (mm_copy_from_user(&edata, useraddr, sizeof(edata)))
- return -EFAULT;
- if (edata.data) {
- if (!(pDevice->TaskOffloadCap &
- LM_TASK_OFFLOAD_TX_TCP_CHECKSUM)) {
-
- return -EINVAL;
- }
- pDevice->TaskToOffload |=
- LM_TASK_OFFLOAD_RX_TCP_CHECKSUM |
- LM_TASK_OFFLOAD_RX_UDP_CHECKSUM;
- }
- else {
- pDevice->TaskToOffload &=
- ~(LM_TASK_OFFLOAD_RX_TCP_CHECKSUM |
- LM_TASK_OFFLOAD_RX_UDP_CHECKSUM);
- }
- return 0;
- }
- case ETHTOOL_GTXCSUM: {
- struct ethtool_value edata = { ETHTOOL_GTXCSUM };
-
- edata.data =
- (dev->features & get_csum_flag( pDevice->ChipRevId)) != 0;
- if (mm_copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
-
- return 0;
- }
- case ETHTOOL_STXCSUM: {
- struct ethtool_value edata;
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (mm_copy_from_user(&edata, useraddr, sizeof(edata)))
- return -EFAULT;
- if (edata.data) {
- if (!(pDevice->TaskOffloadCap &
- LM_TASK_OFFLOAD_TX_TCP_CHECKSUM)) {
-
- return -EINVAL;
- }
- dev->features |= get_csum_flag( pDevice->ChipRevId);
- pDevice->TaskToOffload |=
- LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
- LM_TASK_OFFLOAD_TX_UDP_CHECKSUM;
- }
- else {
- dev->features &= ~get_csum_flag( pDevice->ChipRevId);
- pDevice->TaskToOffload &=
- ~(LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
- LM_TASK_OFFLOAD_TX_UDP_CHECKSUM);
- }
- return 0;
- }
- case ETHTOOL_GSG: {
- struct ethtool_value edata = { ETHTOOL_GSG };
-
- edata.data =
- (dev->features & NETIF_F_SG) != 0;
- if (mm_copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
- return 0;
- }
- case ETHTOOL_SSG: {
- struct ethtool_value edata;
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (mm_copy_from_user(&edata, useraddr, sizeof(edata)))
- return -EFAULT;
- if (edata.data) {
- dev->features |= NETIF_F_SG;
- }
- else {
- dev->features &= ~NETIF_F_SG;
- }
- return 0;
- }
-#endif
-#ifdef ETHTOOL_GRINGPARAM
- case ETHTOOL_GRINGPARAM: {
- struct ethtool_ringparam ering = { ETHTOOL_GRINGPARAM };
-
- ering.rx_max_pending = T3_STD_RCV_RCB_ENTRY_COUNT - 1;
- ering.rx_pending = pDevice->RxStdDescCnt;
- ering.rx_mini_max_pending = 0;
- ering.rx_mini_pending = 0;
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- ering.rx_jumbo_max_pending = T3_JUMBO_RCV_RCB_ENTRY_COUNT - 1;
- ering.rx_jumbo_pending = pDevice->RxJumboDescCnt;
-#else
- ering.rx_jumbo_max_pending = 0;
- ering.rx_jumbo_pending = 0;
-#endif
- ering.tx_max_pending = MAX_TX_PACKET_DESC_COUNT - 1;
- ering.tx_pending = pDevice->TxPacketDescCnt;
- if (mm_copy_to_user(useraddr, &ering, sizeof(ering)))
- return -EFAULT;
- return 0;
- }
-#endif
-#ifdef ETHTOOL_PHYS_ID
- case ETHTOOL_PHYS_ID: {
- struct ethtool_value edata;
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (mm_copy_from_user(&edata, useraddr, sizeof(edata)))
- return -EFAULT;
- if (LM_BlinkLED(pDevice, edata.data) == LM_STATUS_SUCCESS)
- return 0;
- return -EINTR;
- }
-#endif
-#ifdef ETHTOOL_GSTRINGS
- case ETHTOOL_GSTRINGS: {
- struct ethtool_gstrings egstr = { ETHTOOL_GSTRINGS };
-
- if (mm_copy_from_user(&egstr, useraddr, sizeof(egstr)))
- return -EFAULT;
- switch(egstr.string_set) {
-#ifdef ETHTOOL_GSTATS
- case ETH_SS_STATS:
- egstr.len = ETH_NUM_STATS;
- if (mm_copy_to_user(useraddr, &egstr, sizeof(egstr)))
- return -EFAULT;
- if (mm_copy_to_user(useraddr + sizeof(egstr),
- bcm5700_stats_str_arr,
- sizeof(bcm5700_stats_str_arr)))
- return -EFAULT;
- return 0;
-#endif
- default:
- return -EOPNOTSUPP;
- }
- }
-#endif
-#ifdef ETHTOOL_GSTATS
- case ETHTOOL_GSTATS: {
- struct ethtool_stats estats = { ETHTOOL_GSTATS };
- uint64_t stats[ETH_NUM_STATS];
- int i;
- uint64_t *pStats =
- (uint64_t *) pDevice->pStatsBlkVirt;
-
- estats.n_stats = ETH_NUM_STATS;
- if (pStats == 0) {
- memset(stats, 0, sizeof(stats));
- }
- else {
-
- for (i = 0; i < ETH_NUM_STATS; i++) {
- if (bcm5700_stats_offset_arr[i] != 0) {
- stats[i] = SWAP_DWORD_64(*(pStats +
- bcm5700_stats_offset_arr[i]));
- }
- else if (i == RX_CRC_IDX) {
- stats[i] =
- bcm5700_crc_count(pUmDevice);
- }
- else if (i == RX_MAC_ERR_IDX) {
- stats[i] =
- bcm5700_rx_err_count(pUmDevice);
- }
- }
- }
- if (mm_copy_to_user(useraddr, &estats, sizeof(estats))) {
- return -EFAULT;
- }
- if (mm_copy_to_user(useraddr + sizeof(estats), &stats,
- sizeof(stats))) {
- return -EFAULT;
- }
- return 0;
- }
-#endif
-#ifdef ETHTOOL_GTSO
- case ETHTOOL_GTSO: {
- struct ethtool_value edata = { ETHTOOL_GTSO };
-
-#ifdef BCM_TSO
- edata.data =
- (dev->features & NETIF_F_TSO) != 0;
-#else
- edata.data = 0;
-#endif
- if (mm_copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
- return 0;
- }
-#endif
-#ifdef ETHTOOL_STSO
- case ETHTOOL_STSO: {
-#ifdef BCM_TSO
- struct ethtool_value edata;
-
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if (mm_copy_from_user(&edata, useraddr, sizeof(edata)))
- return -EFAULT;
-
- if (!(pDevice->TaskToOffload &
- LM_TASK_OFFLOAD_TCP_SEGMENTATION)) {
- return -EINVAL;
- }
-
- dev->features &= ~NETIF_F_TSO;
-
- if (edata.data) {
- if (T3_ASIC_5714_FAMILY(pDevice->ChipRevId) &&
- (dev->mtu > 1500)) {
- printk(KERN_ALERT "%s: Jumbo Frames and TSO cannot simultaneously be enabled. Jumbo Frames enabled. TSO disabled.\n", dev->name);
- return -EINVAL;
- } else {
- dev->features |= NETIF_F_TSO;
- }
- }
- return 0;
-#else
- return -EINVAL;
-#endif
- }
-#endif
- }
-
- return -EOPNOTSUPP;
-}
-#endif /* #ifdef SIOCETHTOOL */
-
-#if (LINUX_VERSION_CODE >= 0x20400) && (LINUX_VERSION_CODE < 0x20600)
-#include <linux/iobuf.h>
-#endif
-
-/* Provide ioctl() calls to examine the MII xcvr state. */
-STATIC int bcm5700_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- u16 *data = (u16 *)&rq->ifr_data;
- u32 value = 0;
- u16 page_num =0, addr_num =0, len =0;
- unsigned long flags;
-
- switch(cmd) {
- case SIOCGREG_STATUS: //Get register
- {
- struct reg_ioctl_data *rdata =(struct reg_ioctl_data *)rq->ifr_data;
- robo_info_t *robo = (robo_info_t *)pUmDevice->robo;
- page_num = rdata->page_num;
- addr_num = rdata->addr_num;
- len = rdata->len;
- printk("b57um SIOCGREG_STATUS cmd page[0x%x]addr[0x%x]len[%d].\n",page_num,addr_num,len);
- if (len == 6)
- {
- ReadDataFromRegister(robo,page_num,addr_num,len,(void *)&rdata->val_out);
- printk("val[0x%04x-0x%04x-0x%04x].\n",rdata->val_out[0],rdata->val_out[1],rdata->val_out[2]);
- }
- else if (len == 8)
- {
- ReadDataFromRegister(robo,page_num,addr_num,len,(void *)&rdata->val_out);
- printk("val[0x%04x%04x-0x%04x%04x].\n",rdata->val_out[0],rdata->val_out[1],
- rdata->val_out[2],rdata->val_out[3]);
- }
- else if (len == 4)
- {
- ReadDataFromRegister(robo,page_num,addr_num,len,(void *)&rdata->val_out);
- printk("val[0x%04x%04x].\n",rdata->val_out[0],rdata->val_out[1]);
- }
- else
- {
- ReadDataFromRegister(robo,page_num,addr_num,len,(void *)&rdata->val_out);
- printk("val[0x%04x].\n",rdata->val_out[0]);
-
- }
- if (mm_copy_to_user(rq->ifr_data, rdata, sizeof(struct reg_ioctl_data)))
- {
- printk("Fail mm_copy_to_user.\n");
- return -EFAULT;
- }
- return 0;
- }
- break;
- case SIOCSREG_STATUS://Set register
- {
- struct reg_ioctl_data * wdata =(struct reg_ioctl_data *)rq->ifr_data;
- len = wdata->len;
- page_num = wdata->page_num;
- addr_num = wdata->addr_num;
- robo_info_t *robo = (robo_info_t *)pUmDevice->robo;
- if (len == 6)
- {
- WriteDataToRegister(robo,page_num,addr_num,len,(void *)&wdata->val_in);
- //printk("val[0x%04x-0x%04x-0x%04x].\n",val48[0],val48[1],val48[2]);
- }
- else if (len == 8)
- {
- WriteDataToRegister(robo,page_num,addr_num,len,(void *)&wdata->val_in);
- //printk("val[0x%04x-0x%04x-0x%04x-0x%04x].\n",val64[0],val64[1],val64[2],val64[3]);
- }
- else if (len == 4)
- {
- WriteDataToRegister(robo,page_num,addr_num,len,(void *)&wdata->val_in);
- //printk("val[0x%08x].\n",value);
- }
- else
- {
- WriteDataToRegister(robo,page_num,addr_num,len,(void *)&wdata->val_in);
- //printk("len[%d] val[0x%04x].\n",len,val16);
- }
-
- return 0;
- }
- break;
-#ifdef SIOCGMIIPHY
- case SIOCGMIIPHY: /* Get the address of the PHY in use. */
-
- data[0] = pDevice->PhyAddr;
- return 0;
-#endif
-
-#ifdef SIOCGMIIREG
- case SIOCGMIIREG: /* Read the specified MII register. */
- {
- uint32 savephyaddr = 0;
-
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- return -EOPNOTSUPP;
-
- /* ifup only waits for 5 seconds for link up */
- /* NIC may take more than 5 seconds to establish link */
- if ((pUmDevice->delayed_link_ind > 0) &&
- delay_link[pUmDevice->index]) {
- return -EAGAIN;
- }
-
- BCM5700_PHY_LOCK(pUmDevice, flags);
- if (data[0] != 0xffff) {
- savephyaddr = pDevice->PhyAddr;
- pDevice->PhyAddr = data[0];
- }
- LM_ReadPhy(pDevice, data[1] & 0x1f, (LM_UINT32 *)&value);
- if (data[0] != 0xffff)
- pDevice->PhyAddr = savephyaddr;
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
- data[3] = value & 0xffff;
- return 0;
- }
-#endif
-
-#ifdef SIOCSMIIREG
- case SIOCSMIIREG: /* Write the specified MII register */
- {
- uint32 savephyaddr = 0;
-
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
-
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- return -EOPNOTSUPP;
-
- BCM5700_PHY_LOCK(pUmDevice, flags);
- if (data[0] != 0xffff) {
- savephyaddr = pDevice->PhyAddr;
- pDevice->PhyAddr = data[0];
- }
- LM_WritePhy(pDevice, data[1] & 0x1f, data[2]);
- if (data[0] != 0xffff)
- pDevice->PhyAddr = savephyaddr;
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
- data[3] = 0;
- return 0;
- }
-#endif
-
-#ifdef SIOCETHTOOL
- case SIOCETHTOOL:
- return netdev_ethtool_ioctl(dev, (void *) rq->ifr_data);
-#endif
- default:
- return -EOPNOTSUPP;
- }
- return -EOPNOTSUPP;
-}
-
-STATIC void bcm5700_do_rx_mode(struct net_device *dev)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- int i;
- struct dev_mc_list *mclist;
-
- LM_MulticastClear(pDevice);
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
- i++, mclist = mclist->next) {
- LM_MulticastAdd(pDevice, (PLM_UINT8) &mclist->dmi_addr);
- }
- if (dev->flags & IFF_ALLMULTI) {
- if (!(pDevice->ReceiveMask & LM_ACCEPT_ALL_MULTICAST)) {
- LM_SetReceiveMask(pDevice,
- pDevice->ReceiveMask | LM_ACCEPT_ALL_MULTICAST);
- }
- }
- else if (pDevice->ReceiveMask & LM_ACCEPT_ALL_MULTICAST) {
- LM_SetReceiveMask(pDevice,
- pDevice->ReceiveMask & ~LM_ACCEPT_ALL_MULTICAST);
- }
- if (dev->flags & IFF_PROMISC) {
- if (!(pDevice->ReceiveMask & LM_PROMISCUOUS_MODE)) {
- LM_SetReceiveMask(pDevice,
- pDevice->ReceiveMask | LM_PROMISCUOUS_MODE);
- }
- }
- else if (pDevice->ReceiveMask & LM_PROMISCUOUS_MODE) {
- LM_SetReceiveMask(pDevice,
- pDevice->ReceiveMask & ~LM_PROMISCUOUS_MODE);
- }
-
-}
-
-STATIC void bcm5700_set_rx_mode(struct net_device *dev)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- int i;
- struct dev_mc_list *mclist;
- unsigned long flags;
-
- BCM5700_PHY_LOCK(pUmDevice, flags);
-
- LM_MulticastClear(pDevice);
- for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
- i++, mclist = mclist->next) {
- LM_MulticastAdd(pDevice, (PLM_UINT8) &mclist->dmi_addr);
- }
- if (dev->flags & IFF_ALLMULTI) {
- if (!(pDevice->ReceiveMask & LM_ACCEPT_ALL_MULTICAST)) {
- LM_SetReceiveMask(pDevice,
- pDevice->ReceiveMask | LM_ACCEPT_ALL_MULTICAST);
- }
- }
- else if (pDevice->ReceiveMask & LM_ACCEPT_ALL_MULTICAST) {
- LM_SetReceiveMask(pDevice,
- pDevice->ReceiveMask & ~LM_ACCEPT_ALL_MULTICAST);
- }
- if (dev->flags & IFF_PROMISC) {
- if (!(pDevice->ReceiveMask & LM_PROMISCUOUS_MODE)) {
- LM_SetReceiveMask(pDevice,
- pDevice->ReceiveMask | LM_PROMISCUOUS_MODE);
- }
- }
- else if (pDevice->ReceiveMask & LM_PROMISCUOUS_MODE) {
- LM_SetReceiveMask(pDevice,
- pDevice->ReceiveMask & ~LM_PROMISCUOUS_MODE);
- }
-
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
-}
-
-/*
- * Set the hardware MAC address.
- */
-STATIC int bcm5700_set_mac_addr(struct net_device *dev, void *p)
-{
- struct sockaddr *addr=p;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) dev->priv;
- UM_DEVICE_BLOCK *pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
-
- if(is_valid_ether_addr(addr->sa_data)){
-
- memcpy(dev->dev_addr, addr->sa_data,dev->addr_len);
- if (pUmDevice->opened)
- LM_SetMacAddress(pDevice, dev->dev_addr);
- bcm_robo_set_macaddr(pUmDevice->robo, dev->dev_addr);
- return 0;
- }
- return -EINVAL;
-}
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-STATIC int bcm5700_change_mtu(struct net_device *dev, int new_mtu)
-{
- int pkt_size = new_mtu + ETHERNET_PACKET_HEADER_SIZE;
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK)dev->priv;
- PLM_DEVICE_BLOCK pDevice = &pUmDevice->lm_dev;
- unsigned long flags;
- int reinit = 0;
-
- if ((pkt_size < MIN_ETHERNET_PACKET_SIZE_NO_CRC) ||
- (pkt_size > MAX_ETHERNET_JUMBO_PACKET_SIZE_NO_CRC)) {
-
- return -EINVAL;
- }
- if ( !(pDevice->Flags & JUMBO_CAPABLE_FLAG) &&
- (pkt_size > MAX_ETHERNET_PACKET_SIZE_NO_CRC) ) {
-
- return -EINVAL;
- }
- if (pUmDevice->suspended)
- return -EAGAIN;
-
- if (pUmDevice->opened && (new_mtu != dev->mtu) &&
- (pDevice->Flags & JUMBO_CAPABLE_FLAG)) {
- reinit = 1;
- }
-
- BCM5700_PHY_LOCK(pUmDevice, flags);
- if (reinit) {
- netif_stop_queue(dev);
- bcm5700_shutdown(pUmDevice);
- bcm5700_freemem(dev);
- }
-
- dev->mtu = new_mtu;
- if (pkt_size < MAX_ETHERNET_PACKET_SIZE_NO_CRC) {
- pDevice->RxMtu = pDevice->TxMtu =
- MAX_ETHERNET_PACKET_SIZE_NO_CRC;
- }
- else {
- pDevice->RxMtu = pDevice->TxMtu = pkt_size;
- }
-
- if (dev->mtu <= 1514) {
- pDevice->RxJumboDescCnt = 0;
- }
- else if (pDevice->Flags & JUMBO_CAPABLE_FLAG){
- pDevice->RxJumboDescCnt =
- rx_jumbo_desc_cnt[pUmDevice->index];
- }
- pDevice->RxPacketDescCnt = pDevice->RxJumboDescCnt +
- pDevice->RxStdDescCnt;
-
- pDevice->RxJumboBufferSize = (pDevice->RxMtu + 8 /* CRC + VLAN */ +
- COMMON_CACHE_LINE_SIZE-1) & ~COMMON_CACHE_LINE_MASK;
-
-#ifdef BCM_TSO
- if (T3_ASIC_5714_FAMILY(pDevice->ChipRevId) &&
- (dev->mtu > 1514) ) {
- if (dev->features & NETIF_F_TSO) {
- dev->features &= ~NETIF_F_TSO;
- printk(KERN_ALERT "%s: TSO previously enabled. Jumbo Frames and TSO cannot simultaneously be enabled. Jumbo Frames enabled. TSO disabled.\n", dev->name);
- }
- }
-#endif
-
- if (reinit) {
- LM_InitializeAdapter(pDevice);
- bcm5700_do_rx_mode(dev);
- bcm5700_set_vlan_mode(pUmDevice);
- bcm5700_init_counters(pUmDevice);
- if (memcmp(dev->dev_addr, pDevice->NodeAddress, 6)) {
- LM_SetMacAddress(pDevice, dev->dev_addr);
- }
- netif_start_queue(dev);
- bcm5700_intr_on(pUmDevice);
- }
- BCM5700_PHY_UNLOCK(pUmDevice, flags);
-
- return 0;
-}
-#endif
-
-
-#if (LINUX_VERSION_CODE < 0x020300)
-int
-bcm5700_probe(struct net_device *dev)
-{
- int cards_found = 0;
- struct pci_dev *pdev = NULL;
- struct pci_device_id *pci_tbl;
- u16 ssvid, ssid;
-
- if ( ! pci_present())
- return -ENODEV;
-
- pci_tbl = bcm5700_pci_tbl;
- while ((pdev = pci_find_class(PCI_CLASS_NETWORK_ETHERNET << 8, pdev))) {
- int idx;
-
- pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &ssvid);
- pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &ssid);
- for (idx = 0; pci_tbl[idx].vendor; idx++) {
- if ((pci_tbl[idx].vendor == PCI_ANY_ID ||
- pci_tbl[idx].vendor == pdev->vendor) &&
- (pci_tbl[idx].device == PCI_ANY_ID ||
- pci_tbl[idx].device == pdev->device) &&
- (pci_tbl[idx].subvendor == PCI_ANY_ID ||
- pci_tbl[idx].subvendor == ssvid) &&
- (pci_tbl[idx].subdevice == PCI_ANY_ID ||
- pci_tbl[idx].subdevice == ssid))
- {
-
- break;
- }
- }
- if (pci_tbl[idx].vendor == 0)
- continue;
-
-
- if (bcm5700_init_one(pdev, &pci_tbl[idx]) == 0)
- cards_found++;
- }
-
- return cards_found ? 0 : -ENODEV;
-}
-
-#ifdef MODULE
-int init_module(void)
-{
- return bcm5700_probe(NULL);
-}
-
-void cleanup_module(void)
-{
- struct net_device *next_dev;
- PUM_DEVICE_BLOCK pUmDevice;
-
- /* No need to check MOD_IN_USE, as sys_delete_module() checks. */
- while (root_tigon3_dev) {
- pUmDevice = (PUM_DEVICE_BLOCK)root_tigon3_dev->priv;
- next_dev = pUmDevice->next_module;
- unregister_netdev(root_tigon3_dev);
- if (pUmDevice->lm_dev.pMappedMemBase)
- iounmap(pUmDevice->lm_dev.pMappedMemBase);
-#if (LINUX_VERSION_CODE < 0x020600)
- kfree(root_tigon3_dev);
-#else
- free_netdev(root_tigon3_dev);
-#endif
- root_tigon3_dev = next_dev;
- }
-#ifdef BCM_IOCTL32
- unregister_ioctl32_conversion(SIOCNICE);
-#endif
-}
-
-#endif /* MODULE */
-#else /* LINUX_VERSION_CODE < 0x020300 */
-
-#if (LINUX_VERSION_CODE >= 0x020406)
-static int bcm5700_suspend (struct pci_dev *pdev, u32 state)
-#else
-static void bcm5700_suspend (struct pci_dev *pdev)
-#endif
-{
- struct net_device *dev = (struct net_device *) pci_get_drvdata(pdev);
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) dev->priv;
- PLM_DEVICE_BLOCK pDevice = &pUmDevice->lm_dev;
-
- if (!netif_running(dev))
-#if (LINUX_VERSION_CODE >= 0x020406)
- return 0;
-#else
- return;
-#endif
-
- netif_device_detach (dev);
- bcm5700_shutdown(pUmDevice);
-
- LM_SetPowerState(pDevice, LM_POWER_STATE_D3);
-
-/* pci_power_off(pdev, -1);*/
-#if (LINUX_VERSION_CODE >= 0x020406)
- return 0;
-#endif
-}
-
-
-#if (LINUX_VERSION_CODE >= 0x020406)
-static int bcm5700_resume(struct pci_dev *pdev)
-#else
-static void bcm5700_resume(struct pci_dev *pdev)
-#endif
-{
- struct net_device *dev = (struct net_device *) pci_get_drvdata(pdev);
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) dev->priv;
- PLM_DEVICE_BLOCK pDevice = &pUmDevice->lm_dev;
-
- if (!netif_running(dev))
-#if (LINUX_VERSION_CODE >= 0x020406)
- return 0;
-#else
- return;
-#endif
-/* pci_power_on(pdev);*/
- netif_device_attach(dev);
- LM_SetPowerState(pDevice, LM_POWER_STATE_D0);
- MM_InitializeUmPackets(pDevice);
- bcm5700_reset(dev);
-#if (LINUX_VERSION_CODE >= 0x020406)
- return 0;
-#endif
-}
-
-
-static struct pci_driver bcm5700_pci_driver = {
- name: bcm5700_driver,
- id_table: bcm5700_pci_tbl,
- probe: bcm5700_init_one,
- remove: __devexit_p(bcm5700_remove_one),
- suspend: bcm5700_suspend,
- resume: bcm5700_resume,
-};
-
-static int
-bcm5700_notify_reboot(struct notifier_block *this, unsigned long event, void *unused)
-{
- switch (event) {
- case SYS_HALT:
- case SYS_POWER_OFF:
- case SYS_RESTART:
- break;
- default:
- return NOTIFY_DONE;
- }
-
- B57_INFO(("bcm5700 reboot notification\n"));
- pci_unregister_driver(&bcm5700_pci_driver);
- return NOTIFY_DONE;
-}
-
-static int __init bcm5700_init_module (void)
-{
- int pin = 1 << 2;
-
- if (nvram_match("disabled_5397", "1") || (activate_gpio != -1)) {
- if ( activate_gpio != -1 ) pin = activate_gpio;
- printk("5397 switch GPIO-Reset (pin %d)\n", pin);
- sb_t *gpio_sbh;
- if (!(gpio_sbh = sb_kattach(SB_OSH))) return -ENODEV;
- sb_gpiosetcore(gpio_sbh);
-// sb_gpioreserve(gpio_sbh, 0x4, GPIO_HI_PRIORITY);
- sb_gpioouten(gpio_sbh, 0x4, 0x4, GPIO_HI_PRIORITY);
- sb_gpioout(gpio_sbh, 0x4, 0x4, GPIO_HI_PRIORITY);
- sb_detach(gpio_sbh);
- }
-
- if (msglevel != 0xdeadbeef) {
- b57_msg_level = msglevel;
- printf("%s: msglevel set to 0x%x\n", __FUNCTION__, b57_msg_level);
- } else
- b57_msg_level = B57_ERR_VAL;
-
- return pci_module_init(&bcm5700_pci_driver);
-}
-
-static void __exit bcm5700_cleanup_module (void)
-{
- unregister_reboot_notifier(&bcm5700_reboot_notifier);
- pci_unregister_driver(&bcm5700_pci_driver);
-}
-
-module_init(bcm5700_init_module);
-module_exit(bcm5700_cleanup_module);
-#endif
-
-/*
- * Middle Module
- *
- */
-
-
-#ifdef BCM_NAPI_RXPOLL
-LM_STATUS
-MM_ScheduleRxPoll(LM_DEVICE_BLOCK *pDevice)
-{
- struct net_device *dev = ((UM_DEVICE_BLOCK *) pDevice)->dev;
-
- if (netif_rx_schedule_prep(dev)) {
- __netif_rx_schedule(dev);
- return LM_STATUS_SUCCESS;
- }
- return LM_STATUS_FAILURE;
-}
-#endif
-
-LM_STATUS
-MM_ReadConfig16(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT16 *pValue16)
-{
- UM_DEVICE_BLOCK *pUmDevice;
-
- pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
- pci_read_config_word(pUmDevice->pdev, Offset, (u16 *) pValue16);
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_ReadConfig32(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT32 *pValue32)
-{
- UM_DEVICE_BLOCK *pUmDevice;
-
- pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
- pci_read_config_dword(pUmDevice->pdev, Offset, (u32 *) pValue32);
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_WriteConfig16(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT16 Value16)
-{
- UM_DEVICE_BLOCK *pUmDevice;
-
- pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
- pci_write_config_word(pUmDevice->pdev, Offset, Value16);
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_WriteConfig32(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT32 Value32)
-{
- UM_DEVICE_BLOCK *pUmDevice;
-
- pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
- pci_write_config_dword(pUmDevice->pdev, Offset, Value32);
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_AllocateSharedMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
- PLM_VOID *pMemoryBlockVirt, PLM_PHYSICAL_ADDRESS pMemoryBlockPhy,
- LM_BOOL Cached)
-{
- PLM_VOID pvirt;
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
- dma_addr_t mapping;
-
- pvirt = pci_alloc_consistent(pUmDevice->pdev, BlockSize,
- &mapping);
- if (!pvirt) {
- return LM_STATUS_FAILURE;
- }
- pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt;
- pUmDevice->dma_list[pUmDevice->mem_list_num] = mapping;
- pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize;
- memset(pvirt, 0, BlockSize);
- *pMemoryBlockVirt = (PLM_VOID) pvirt;
- MM_SetAddr(pMemoryBlockPhy, mapping);
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_AllocateMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
- PLM_VOID *pMemoryBlockVirt)
-{
- PLM_VOID pvirt;
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-
-
- /* Maximum in slab.c */
- if (BlockSize > 131072) {
- goto MM_Alloc_error;
- }
-
- pvirt = kmalloc(BlockSize, GFP_ATOMIC);
- if (!pvirt) {
- goto MM_Alloc_error;
- }
- pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt;
- pUmDevice->dma_list[pUmDevice->mem_list_num] = 0;
- pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = 0;
- /* mem_size_list[i] == 0 indicates that the memory should be freed */
- /* using kfree */
- memset(pvirt, 0, BlockSize);
- *pMemoryBlockVirt = pvirt;
- return LM_STATUS_SUCCESS;
-
-MM_Alloc_error:
- printk(KERN_WARNING "%s: Memory allocation failed - buffer parameters may be set too high\n", pUmDevice->dev->name);
- return LM_STATUS_FAILURE;
-}
-
-LM_STATUS
-MM_MapMemBase(PLM_DEVICE_BLOCK pDevice)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-
- pDevice->pMappedMemBase = ioremap_nocache(
- pci_resource_start(pUmDevice->pdev, 0), sizeof(T3_STD_MEM_MAP));
- if (pDevice->pMappedMemBase == 0)
- return LM_STATUS_FAILURE;
-
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_InitializeUmPackets(PLM_DEVICE_BLOCK pDevice)
-{
- unsigned int i;
- struct sk_buff *skb;
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
- PUM_PACKET pUmPacket;
- PLM_PACKET pPacket;
-
- for (i = 0; i < pDevice->RxPacketDescCnt; i++) {
- pPacket = QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
- pUmPacket = (PUM_PACKET) pPacket;
- if (pPacket == 0) {
- printk(KERN_DEBUG "Bad RxPacketFreeQ\n");
- }
- if (pUmPacket->skbuff == 0) {
-#ifdef BCM_WL_EMULATOR
- skb = (struct sk_buff *)wlcemu_pktget(pDevice->wlc,pPacket->u.Rx.RxBufferSize + 2);
-#else
- skb = dev_alloc_skb(pPacket->u.Rx.RxBufferSize + 2 + EXTRA_HDR);
-#endif
- if (skb == 0) {
- pUmPacket->skbuff = 0;
- QQ_PushTail(
- &pUmDevice->rx_out_of_buf_q.Container,
- pPacket);
- continue;
- }
- pUmPacket->skbuff = skb;
- skb->dev = pUmDevice->dev;
-#ifndef BCM_WL_EMULATOR
- skb_reserve(skb, EXTRA_HDR - pUmDevice->rx_buf_align);
-#endif
- }
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- }
- if (T3_ASIC_REV(pUmDevice->lm_dev.ChipRevId) == T3_ASIC_REV_5700) {
- /* reallocate buffers in the ISR */
- pUmDevice->rx_buf_repl_thresh = 0;
- pUmDevice->rx_buf_repl_panic_thresh = 0;
- pUmDevice->rx_buf_repl_isr_limit = 0;
- }
- else {
- pUmDevice->rx_buf_repl_thresh = pDevice->RxPacketDescCnt / 8;
- pUmDevice->rx_buf_repl_panic_thresh =
- pDevice->RxPacketDescCnt * 7 / 8;
-
- /* This limits the time spent in the ISR when the receiver */
- /* is in a steady state of being overrun. */
- pUmDevice->rx_buf_repl_isr_limit = pDevice->RxPacketDescCnt / 8;
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- if (pDevice->RxJumboDescCnt != 0) {
- if (pUmDevice->rx_buf_repl_thresh >=
- pDevice->RxJumboDescCnt) {
-
- pUmDevice->rx_buf_repl_thresh =
- pUmDevice->rx_buf_repl_panic_thresh =
- pDevice->RxJumboDescCnt - 1;
- }
- if (pUmDevice->rx_buf_repl_thresh >=
- pDevice->RxStdDescCnt) {
-
- pUmDevice->rx_buf_repl_thresh =
- pUmDevice->rx_buf_repl_panic_thresh =
- pDevice->RxStdDescCnt - 1;
- }
- }
-#endif
- }
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_GetConfig(PLM_DEVICE_BLOCK pDevice)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
- int index = pUmDevice->index;
- struct net_device *dev = pUmDevice->dev;
-
- if (index >= MAX_UNITS)
- return LM_STATUS_SUCCESS;
-
-#if LINUX_KERNEL_VERSION < 0x0020609
-
- bcm5700_validate_param_range(pUmDevice, &auto_speed[index], "auto_speed",
- 0, 1, 1);
- if (auto_speed[index] == 0)
- pDevice->DisableAutoNeg = TRUE;
- else
- pDevice->DisableAutoNeg = FALSE;
-
- if (line_speed[index] == 0) {
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_AUTO;
- pDevice->DisableAutoNeg = FALSE;
- }
- else {
- bcm5700_validate_param_range(pUmDevice, &full_duplex[index],
- "full_duplex", 0, 1, 1);
- if (full_duplex[index]) {
- pDevice->RequestedDuplexMode = LM_DUPLEX_MODE_FULL;
- }
- else {
- pDevice->RequestedDuplexMode = LM_DUPLEX_MODE_HALF;
- }
-
- if (line_speed[index] == 1000) {
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_1000MBPS;
- if (pDevice->PhyFlags & PHY_NO_GIGABIT) {
- pDevice->RequestedLineSpeed =
- LM_LINE_SPEED_100MBPS;
- printk(KERN_WARNING "%s-%d: Invalid line_speed parameter (1000), using 100\n", bcm5700_driver, index);
- }
- else {
- if ((pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
- !full_duplex[index]) {
- printk(KERN_WARNING "%s-%d: Invalid full_duplex parameter (0) for fiber, using 1\n", bcm5700_driver, index);
- pDevice->RequestedDuplexMode =
- LM_DUPLEX_MODE_FULL;
- }
-
- if (!(pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
- !auto_speed[index] && !(pDevice->PhyFlags & PHY_IS_FIBER) ) {
- printk(KERN_WARNING "%s-%d: Invalid auto_speed parameter (0) for copper, using 1\n", bcm5700_driver, index);
- pDevice->DisableAutoNeg = FALSE;
- }
- }
- }
- else if ((pDevice->TbiFlags & ENABLE_TBI_FLAG) ||
- (pDevice->PhyFlags & PHY_IS_FIBER)){
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_AUTO;
- pDevice->RequestedDuplexMode = LM_DUPLEX_MODE_FULL;
- pDevice->DisableAutoNeg = FALSE;
- printk(KERN_WARNING "%s-%d: Invalid line_speed parameter (%d), using auto\n", bcm5700_driver, index, line_speed[index]);
- }
- else if (line_speed[index] == 100) {
-
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_100MBPS;
- }
- else if (line_speed[index] == 10) {
-
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_10MBPS;
- }
- else {
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_AUTO;
- pDevice->DisableAutoNeg = FALSE;
- printk(KERN_WARNING "%s-%d: Invalid line_speed parameter (%d), using 0\n", bcm5700_driver, index, line_speed[index]);
- }
-
- }
-
-#endif /* LINUX_KERNEL_VERSION */
-
- /* This is an unmanageable switch nic and will have link problems if
- not set to auto
- */
- if(pDevice->SubsystemVendorId==0x103c && pDevice->SubsystemId==0x3226)
- {
- if(pDevice->RequestedLineSpeed != LM_LINE_SPEED_AUTO)
- {
- printk(KERN_WARNING "%s-%d: Invalid line_speed parameter (%d), using 0\n",
- bcm5700_driver, index, line_speed[index]);
- }
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_AUTO;
- pDevice->DisableAutoNeg = FALSE;
- }
-
-#if LINUX_KERNEL_VERSION < 0x0020609
-
- pDevice->FlowControlCap = 0;
- bcm5700_validate_param_range(pUmDevice, &rx_flow_control[index],
- "rx_flow_control", 0, 1, 0);
- if (rx_flow_control[index] != 0) {
- pDevice->FlowControlCap |= LM_FLOW_CONTROL_RECEIVE_PAUSE;
- }
- bcm5700_validate_param_range(pUmDevice, &tx_flow_control[index],
- "tx_flow_control", 0, 1, 0);
- if (tx_flow_control[index] != 0) {
- pDevice->FlowControlCap |= LM_FLOW_CONTROL_TRANSMIT_PAUSE;
- }
- bcm5700_validate_param_range(pUmDevice, &auto_flow_control[index],
- "auto_flow_control", 0, 1, 0);
- if (auto_flow_control[index] != 0) {
- if (pDevice->DisableAutoNeg == FALSE) {
-
- pDevice->FlowControlCap |= LM_FLOW_CONTROL_AUTO_PAUSE;
- if ((tx_flow_control[index] == 0) &&
- (rx_flow_control[index] == 0)) {
-
- pDevice->FlowControlCap |=
- LM_FLOW_CONTROL_TRANSMIT_PAUSE |
- LM_FLOW_CONTROL_RECEIVE_PAUSE;
- }
- }
- }
-
- if (dev->mtu > 1500) {
-#ifdef BCM_TSO
- if (T3_ASIC_5714_FAMILY(pDevice->ChipRevId) &&
- (dev->features & NETIF_F_TSO)) {
- dev->features &= ~NETIF_F_TSO;
- printk(KERN_ALERT "%s: TSO previously enabled. Jumbo Frames and TSO cannot simultaneously be enabled. Jumbo Frames enabled. TSO disabled.\n", dev->name);
- }
-#endif
- pDevice->RxMtu = dev->mtu + 14;
- }
-
- if ((T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700) &&
- !(pDevice->Flags & BCM5788_FLAG)) {
- pDevice->Flags |= USE_TAGGED_STATUS_FLAG;
- pUmDevice->timer_interval = HZ;
- if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) &&
- (pDevice->TbiFlags & ENABLE_TBI_FLAG)) {
- pUmDevice->timer_interval = HZ/4;
- }
- }
- else {
- pUmDevice->timer_interval = HZ/10;
- }
-
- bcm5700_validate_param_range(pUmDevice, &tx_pkt_desc_cnt[index],
- "tx_pkt_desc_cnt", 1, MAX_TX_PACKET_DESC_COUNT-1, TX_DESC_CNT);
- pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index];
- bcm5700_validate_param_range(pUmDevice, &rx_std_desc_cnt[index],
- "rx_std_desc_cnt", 1, T3_STD_RCV_RCB_ENTRY_COUNT-1,
- RX_DESC_CNT);
- pDevice->RxStdDescCnt = rx_std_desc_cnt[index];
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- bcm5700_validate_param_range(pUmDevice, &rx_jumbo_desc_cnt[index],
- "rx_jumbo_desc_cnt", 1, T3_JUMBO_RCV_RCB_ENTRY_COUNT-1,
- JBO_DESC_CNT);
-
- if (mtu[index] <= 1514)
- pDevice->RxJumboDescCnt = 0;
- else if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId)){
- pDevice->RxJumboDescCnt = rx_jumbo_desc_cnt[index];
- }
-#endif
-
-#ifdef BCM_INT_COAL
- bcm5700_validate_param_range(pUmDevice, &adaptive_coalesce[index],
- "adaptive_coalesce", 0, 1, 1);
-#ifdef BCM_NAPI_RXPOLL
- if (adaptive_coalesce[index]) {
- printk(KERN_WARNING "%s-%d: adaptive_coalesce not used in NAPI mode\n", bcm5700_driver, index);
- adaptive_coalesce[index] = 0;
-
- }
-#endif
- pUmDevice->adaptive_coalesce = adaptive_coalesce[index];
- if (!pUmDevice->adaptive_coalesce) {
- bcm5700_validate_param_range(pUmDevice,
- &rx_coalesce_ticks[index], "rx_coalesce_ticks", 0,
- MAX_RX_COALESCING_TICKS, RX_COAL_TK);
- if ((rx_coalesce_ticks[index] == 0) &&
- (rx_max_coalesce_frames[index] == 0)) {
-
- printk(KERN_WARNING "%s-%d: Conflicting rx_coalesce_ticks (0) and rx_max_coalesce_frames (0) parameters, using %d and %d respectively\n",
- bcm5700_driver, index, RX_COAL_TK, RX_COAL_FM);
-
- rx_coalesce_ticks[index] = RX_COAL_TK;
- rx_max_coalesce_frames[index] = RX_COAL_FM;
- }
- pDevice->RxCoalescingTicks = pUmDevice->rx_curr_coalesce_ticks =
- rx_coalesce_ticks[index];
-#ifdef BCM_NAPI_RXPOLL
- pDevice->RxCoalescingTicksDuringInt = rx_coalesce_ticks[index];
-#endif
-
- bcm5700_validate_param_range(pUmDevice,
- &rx_max_coalesce_frames[index],
- "rx_max_coalesce_frames", 0,
- MAX_RX_MAX_COALESCED_FRAMES, RX_COAL_FM);
-
- pDevice->RxMaxCoalescedFrames =
- pUmDevice->rx_curr_coalesce_frames =
- rx_max_coalesce_frames[index];
-#ifdef BCM_NAPI_RXPOLL
- pDevice->RxMaxCoalescedFramesDuringInt =
- rx_max_coalesce_frames[index];
-#endif
-
- bcm5700_validate_param_range(pUmDevice,
- &tx_coalesce_ticks[index], "tx_coalesce_ticks", 0,
- MAX_TX_COALESCING_TICKS, TX_COAL_TK);
- if ((tx_coalesce_ticks[index] == 0) &&
- (tx_max_coalesce_frames[index] == 0)) {
-
- printk(KERN_WARNING "%s-%d: Conflicting tx_coalesce_ticks (0) and tx_max_coalesce_frames (0) parameters, using %d and %d respectively\n",
- bcm5700_driver, index, TX_COAL_TK, TX_COAL_FM);
-
- tx_coalesce_ticks[index] = TX_COAL_TK;
- tx_max_coalesce_frames[index] = TX_COAL_FM;
- }
- pDevice->TxCoalescingTicks = tx_coalesce_ticks[index];
- bcm5700_validate_param_range(pUmDevice,
- &tx_max_coalesce_frames[index],
- "tx_max_coalesce_frames", 0,
- MAX_TX_MAX_COALESCED_FRAMES, TX_COAL_FM);
- pDevice->TxMaxCoalescedFrames = tx_max_coalesce_frames[index];
- pUmDevice->tx_curr_coalesce_frames =
- pDevice->TxMaxCoalescedFrames;
-
- bcm5700_validate_param_range(pUmDevice,
- &stats_coalesce_ticks[index], "stats_coalesce_ticks",
- 0, MAX_STATS_COALESCING_TICKS, ST_COAL_TK);
- if (adaptive_coalesce[index]) {
- printk(KERN_WARNING "%s-%d: Invalid stats_coalesce_ticks parameter set with with adaptive_coalesce parameter. Using adaptive_coalesce.\n", bcm5700_driver, index);
- }else{
- if ((stats_coalesce_ticks[index] > 0) &&
- (stats_coalesce_ticks[index] < 100)) {
- printk(KERN_WARNING "%s-%d: Invalid stats_coalesce_ticks parameter (%u), using 100\n", bcm5700_driver, index, (unsigned int) stats_coalesce_ticks[index]);
- stats_coalesce_ticks[index] = 100;
- pDevice->StatsCoalescingTicks = stats_coalesce_ticks[index];
- pDevice->StatsCoalescingTicks = stats_coalesce_ticks[index];
- }
- }
- }
- else {
- pUmDevice->rx_curr_coalesce_frames = RX_COAL_FM;
- pUmDevice->rx_curr_coalesce_ticks = RX_COAL_TK;
- pUmDevice->tx_curr_coalesce_frames = TX_COAL_FM;
- }
-#endif
-
- if (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId)) {
- unsigned int tmpvar;
-
- tmpvar = pDevice->StatsCoalescingTicks / BCM_TIMER_GRANULARITY;
-
- /*
- * If the result is zero, the request is too demanding.
- */
- if (tmpvar == 0) {
- tmpvar = 1;
- }
-
- pDevice->StatsCoalescingTicks = tmpvar * BCM_TIMER_GRANULARITY;
-
- pUmDevice->statstimer_interval = tmpvar;
- }
-
-#ifdef BCM_WOL
- bcm5700_validate_param_range(pUmDevice, &enable_wol[index],
- "enable_wol", 0, 1, 0);
- if (enable_wol[index]) {
- pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_MAGIC_PACKET;
- pDevice->WakeUpMode = LM_WAKE_UP_MODE_MAGIC_PACKET;
- }
-#endif
-#ifdef INCLUDE_TBI_SUPPORT
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG) {
- if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704) ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703)) {
- /* just poll since we have hardware autoneg. in 5704 */
- pDevice->TbiFlags |= TBI_PURE_POLLING_FLAG;
- }
- else {
- pDevice->TbiFlags |= TBI_POLLING_INTR_FLAG;
- }
- }
-#endif
- bcm5700_validate_param_range(pUmDevice, &scatter_gather[index],
- "scatter_gather", 0, 1, 1);
- bcm5700_validate_param_range(pUmDevice, &tx_checksum[index],
- "tx_checksum", 0, 1, 1);
- bcm5700_validate_param_range(pUmDevice, &rx_checksum[index],
- "rx_checksum", 0, 1, 1);
- if (!(pDevice->TaskOffloadCap & LM_TASK_OFFLOAD_TX_TCP_CHECKSUM)) {
- if (tx_checksum[index] || rx_checksum[index]) {
-
- pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
- printk(KERN_WARNING "%s-%d: Checksum offload not available on this NIC\n", bcm5700_driver, index);
- }
- }
- else {
- if (rx_checksum[index]) {
- pDevice->TaskToOffload |=
- LM_TASK_OFFLOAD_RX_TCP_CHECKSUM |
- LM_TASK_OFFLOAD_RX_UDP_CHECKSUM;
- }
- if (tx_checksum[index]) {
- pDevice->TaskToOffload |=
- LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
- LM_TASK_OFFLOAD_TX_UDP_CHECKSUM;
- pDevice->Flags |= NO_TX_PSEUDO_HDR_CSUM_FLAG;
- }
- }
-#ifdef BCM_TSO
- bcm5700_validate_param_range(pUmDevice, &enable_tso[index],
- "enable_tso", 0, 1, 1);
-
- /* Always enable TSO firmware if supported */
- /* This way we can turn it on or off on the fly */
- if (pDevice->TaskOffloadCap & LM_TASK_OFFLOAD_TCP_SEGMENTATION)
- {
- pDevice->TaskToOffload |=
- LM_TASK_OFFLOAD_TCP_SEGMENTATION;
- }
- if (enable_tso[index] &&
- !(pDevice->TaskToOffload & LM_TASK_OFFLOAD_TCP_SEGMENTATION))
- {
- printk(KERN_WARNING "%s-%d: TSO not available on this NIC\n", bcm5700_driver, index);
- }
-#endif
-#ifdef BCM_ASF
- bcm5700_validate_param_range(pUmDevice, &vlan_tag_mode[index],
- "vlan_strip_mode", 0, 2, 0);
- pUmDevice->vlan_tag_mode = vlan_tag_mode[index];
-#else
- pUmDevice->vlan_tag_mode = VLAN_TAG_MODE_NORMAL_STRIP;
-#endif
-
-#endif /* LINUX_KERNEL_VERSION */
-
-#ifdef BCM_NIC_SEND_BD
- bcm5700_validate_param_range(pUmDevice, &nic_tx_bd[index], "nic_tx_bd",
- 0, 1, 0);
- if (nic_tx_bd[index])
- pDevice->Flags |= NIC_SEND_BD_FLAG;
- if ((pDevice->Flags & ENABLE_PCIX_FIX_FLAG) ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705)) {
- if (pDevice->Flags & NIC_SEND_BD_FLAG) {
- pDevice->Flags &= ~NIC_SEND_BD_FLAG;
- printk(KERN_WARNING "%s-%d: Nic Send BDs not available on this NIC or not possible on this system\n", bcm5700_driver, index);
- }
- }
-#endif
-#if defined(CONFIG_PCI_MSI) || defined(CONFIG_PCI_USE_VECTOR)
- bcm5700_validate_param_range(pUmDevice, &disable_msi[pUmDevice->index],
- "disable_msi", 0, 1, 0);
-#endif
-
- bcm5700_validate_param_range(pUmDevice, &delay_link[index],
- "delay_link", 0, 1, 0);
-
- bcm5700_validate_param_range(pUmDevice, &disable_d3hot[index],
- "disable_d3hot", 0, 1, 0);
- if (disable_d3hot[index]) {
-
-#ifdef BCM_WOL
- if (enable_wol[index]) {
- pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_NONE;
- pDevice->WakeUpMode = LM_WAKE_UP_MODE_NONE;
- printk(KERN_WARNING "%s-%d: Wake-On-Lan disabled because D3Hot is disabled\n", bcm5700_driver, index);
- }
-#endif
- pDevice->Flags |= DISABLE_D3HOT_FLAG;
- }
-
- return LM_STATUS_SUCCESS;
-}
-
-/* From include/proto/ethernet.h */
-#define ETHER_TYPE_8021Q 0x8100 /* 802.1Q */
-
-/* From include/proto/vlan.h */
-#define VLAN_PRI_MASK 7 /* 3 bits of priority */
-#define VLAN_PRI_SHIFT 13
-
-/* Replace the priority in a vlan tag */
-#define UPD_VLANTAG_PRIO(tag, prio) do { \
- tag &= ~(VLAN_PRI_MASK << VLAN_PRI_SHIFT); \
- tag |= prio << VLAN_PRI_SHIFT; \
-} while (0)
-
-/* Takes an Ethernet frame and sets out-of-bound PKTPRIO.
- * Also updates the inplace vlan tag if requested.
- * For debugging, it returns an indication of what it did.
- */
-#define PKTPRIO_VDSCP 0x100 /* DSCP prio found after VLAN tag */
-#define PKTPRIO_VLAN 0x200 /* VLAN prio found */
-#define PKTPRIO_UPD 0x400 /* DSCP used to update VLAN prio */
-#define PKTPRIO_DSCP 0x800 /* DSCP prio found */
-#define PKTSETPRIO(skb, x) (((struct sk_buff*)(skb))->priority = (x))
-static uint
-pktsetprio(void *pkt, bool update_vtag)
-{
- struct ether_header *eh;
- struct ethervlan_header *evh;
- uint8 *pktdata;
- int priority = 0;
- int rc = 0;
-
- pktdata = (uint8 *) PKTDATA(NULL, pkt);
- ASSERT(ISALIGNED((uintptr)pktdata, sizeof(uint16)));
-
- eh = (struct ether_header *) pktdata;
-
- if (ntoh16(eh->ether_type) == ETHER_TYPE_8021Q) {
- uint16 vlan_tag;
- int vlan_prio, dscp_prio = 0;
-
- evh = (struct ethervlan_header *)eh;
-
- vlan_tag = ntoh16(evh->vlan_tag);
- vlan_prio = (int) (vlan_tag >> VLAN_PRI_SHIFT) & VLAN_PRI_MASK;
-
- if (ntoh16(evh->ether_type) == ETHER_TYPE_IP) {
- uint8 *ip_body = pktdata + sizeof(struct ethervlan_header);
- uint8 tos_tc = IP_TOS(ip_body);
- dscp_prio = (int)(tos_tc >> IPV4_TOS_PREC_SHIFT);
- if ((IP_VER(ip_body) == IP_VER_4) && (IPV4_PROT(ip_body) == IP_PROT_TCP)) {
- int ip_len;
- int src_port;
- bool src_port_exc;
- uint8 *tcp_hdr;
-
- ip_len = IPV4_PAYLOAD_LEN(ip_body);
- tcp_hdr = IPV4_NO_OPTIONS_PAYLOAD(ip_body);
- src_port = TCP_SRC_PORT(tcp_hdr);
- src_port_exc = (src_port == 10110) || (src_port == 10120) ||
- (src_port == 10130) || (src_port == 10140);
-
- if ((ip_len == 40) && src_port_exc && TCP_IS_ACK(tcp_hdr)) {
- dscp_prio = 7;
- }
- }
- }
-
- /* DSCP priority gets precedence over 802.1P (vlan tag) */
- if (dscp_prio != 0) {
- priority = dscp_prio;
- rc |= PKTPRIO_VDSCP;
- } else {
- priority = vlan_prio;
- rc |= PKTPRIO_VLAN;
- }
- /*
- * If the DSCP priority is not the same as the VLAN priority,
- * then overwrite the priority field in the vlan tag, with the
- * DSCP priority value. This is required for Linux APs because
- * the VLAN driver on Linux, overwrites the skb->priority field
- * with the priority value in the vlan tag
- */
- if (update_vtag && (priority != vlan_prio)) {
- vlan_tag &= ~(VLAN_PRI_MASK << VLAN_PRI_SHIFT);
- vlan_tag |= (uint16)priority << VLAN_PRI_SHIFT;
- evh->vlan_tag = hton16(vlan_tag);
- rc |= PKTPRIO_UPD;
- }
- } else if (ntoh16(eh->ether_type) == ETHER_TYPE_IP) {
- uint8 *ip_body = pktdata + sizeof(struct ether_header);
- uint8 tos_tc = IP_TOS(ip_body);
- priority = (int)(tos_tc >> IPV4_TOS_PREC_SHIFT);
- rc |= PKTPRIO_DSCP;
- if ((IP_VER(ip_body) == IP_VER_4) && (IPV4_PROT(ip_body) == IP_PROT_TCP)) {
- int ip_len;
- int src_port;
- bool src_port_exc;
- uint8 *tcp_hdr;
-
- ip_len = IPV4_PAYLOAD_LEN(ip_body);
- tcp_hdr = IPV4_NO_OPTIONS_PAYLOAD(ip_body);
- src_port = TCP_SRC_PORT(tcp_hdr);
- src_port_exc = (src_port == 10110) || (src_port == 10120) ||
- (src_port == 10130) || (src_port == 10140);
-
- if ((ip_len == 40) && src_port_exc && TCP_IS_ACK(tcp_hdr)) {
- priority = 7;
- }
- }
- }
-
- ASSERT(priority >= 0 && priority <= MAXPRIO);
- PKTSETPRIO(pkt, priority);
- return (rc | priority);
-}
-
-LM_STATUS
-MM_IndicateRxPackets(PLM_DEVICE_BLOCK pDevice)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
- PLM_PACKET pPacket;
- PUM_PACKET pUmPacket;
- struct sk_buff *skb;
- int size;
- int vlan_tag_size = 0;
- uint16 dscp_prio;
-
- if (pDevice->ReceiveMask & LM_KEEP_VLAN_TAG)
- vlan_tag_size = 4;
-
- while (1) {
- pPacket = (PLM_PACKET)
- QQ_PopHead(&pDevice->RxPacketReceivedQ.Container);
- if (pPacket == 0)
- break;
- pUmPacket = (PUM_PACKET) pPacket;
-#if !defined(NO_PCI_UNMAP)
- pci_unmap_single(pUmDevice->pdev,
- pci_unmap_addr(pUmPacket, map[0]),
- pPacket->u.Rx.RxBufferSize,
- PCI_DMA_FROMDEVICE);
-#endif
- if ((pPacket->PacketStatus != LM_STATUS_SUCCESS) ||
- ((size = pPacket->PacketSize) >
- (pDevice->RxMtu + vlan_tag_size))) {
-
- /* reuse skb */
-#ifdef BCM_TASKLET
- QQ_PushTail(&pUmDevice->rx_out_of_buf_q.Container, pPacket);
-#else
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
-#endif
- pUmDevice->rx_misc_errors++;
- continue;
- }
- skb = pUmPacket->skbuff;
- skb_put(skb, size);
- skb->pkt_type = 0;
- /* Extract priority from payload and put it in skb->priority */
- dscp_prio = 0;
- if (pUmDevice->qos) {
- uint rc;
-
- rc = pktsetprio(skb, TRUE);
- if (rc & (PKTPRIO_VDSCP | PKTPRIO_DSCP))
- dscp_prio = rc & VLAN_PRI_MASK;
- if (rc != 0)
- B57_INFO(("pktsetprio returned 0x%x, skb->priority: %d\n",
- rc, skb->priority));
- }
- skb->protocol = eth_type_trans(skb, skb->dev);
- if (size > pDevice->RxMtu) {
- /* Make sure we have a valid VLAN tag */
- if (htons(skb->protocol) != ETHER_TYPE_8021Q) {
- dev_kfree_skb_irq(skb);
- pUmDevice->rx_misc_errors++;
- goto drop_rx;
- }
- }
-
- pUmDevice->stats.rx_bytes += skb->len;
-
- if ((pPacket->Flags & RCV_BD_FLAG_TCP_UDP_CHKSUM_FIELD) &&
- (pDevice->TaskToOffload &
- LM_TASK_OFFLOAD_RX_TCP_CHECKSUM)) {
- if (pPacket->u.Rx.TcpUdpChecksum == 0xffff) {
-
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-#if TIGON3_DEBUG
- pUmDevice->rx_good_chksum_count++;
-#endif
- }
- else {
- skb->ip_summed = CHECKSUM_NONE;
- pUmDevice->rx_bad_chksum_count++;
- }
- }
- else {
- skb->ip_summed = CHECKSUM_NONE;
- }
- {
-#ifdef BCM_VLAN
- if (pUmDevice->vlgrp &&
- (pPacket->Flags & RCV_BD_FLAG_VLAN_TAG)) {
- /* Override vlan priority with dscp priority */
- if (dscp_prio)
- UPD_VLANTAG_PRIO(pPacket->VlanTag, dscp_prio);
-#ifdef BCM_NAPI_RXPOLL
- vlan_hwaccel_receive_skb(skb, pUmDevice->vlgrp,
- pPacket->VlanTag);
-#else
- vlan_hwaccel_rx(skb, pUmDevice->vlgrp,
- pPacket->VlanTag);
-#endif
- } else
-#endif
- {
-#ifdef BCM_WL_EMULATOR
- if(pDevice->wl_emulate_rx) {
- /* bcmstats("emu recv %d %d"); */
- wlcemu_receive_skb(pDevice->wlc, skb);
- /* bcmstats("emu recv end %d %d"); */
- }
- else
-#endif /* BCM_WL_EMULATOR */
- {
-#ifdef BCM_NAPI_RXPOLL
- netif_receive_skb(skb);
-#else
- netif_rx(skb);
-#endif
- }
- }
- }
- pUmDevice->dev->last_rx = jiffies;
-
-drop_rx:
-#ifdef BCM_TASKLET
- pUmPacket->skbuff = 0;
- QQ_PushTail(&pUmDevice->rx_out_of_buf_q.Container, pPacket);
-#else
-#ifdef BCM_WL_EMULATOR
- skb = (struct sk_buff *)wlcemu_pktget(pDevice->wlc,pPacket->u.Rx.RxBufferSize + 2);
-#else
- skb = dev_alloc_skb(pPacket->u.Rx.RxBufferSize + 2 + EXTRA_HDR);
-#endif /* BCM_WL_EMULATOR */
- if (skb == 0) {
- pUmPacket->skbuff = 0;
- QQ_PushTail(&pUmDevice->rx_out_of_buf_q.Container, pPacket);
- }
- else {
- pUmPacket->skbuff = skb;
- skb->dev = pUmDevice->dev;
-#ifndef BCM_WL_EMULATOR
- skb_reserve(skb, EXTRA_HDR - pUmDevice->rx_buf_align);
-#endif
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- }
-#endif
- }
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_CoalesceTxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
-{
- PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
- struct sk_buff *skb = pUmPacket->skbuff;
- struct sk_buff *nskb;
-#if !defined(NO_PCI_UNMAP)
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-
- pci_unmap_single(pUmDevice->pdev,
- pci_unmap_addr(pUmPacket, map[0]),
- pci_unmap_len(pUmPacket, map_len[0]),
- PCI_DMA_TODEVICE);
-#if MAX_SKB_FRAGS
- {
- int i;
-
- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- pci_unmap_page(pUmDevice->pdev,
- pci_unmap_addr(pUmPacket, map[i + 1]),
- pci_unmap_len(pUmPacket, map_len[i + 1]),
- PCI_DMA_TODEVICE);
- }
- }
-#endif
-#endif
- if ((nskb = skb_copy(skb, GFP_ATOMIC))) {
- pUmPacket->lm_packet.u.Tx.FragCount = 1;
- dev_kfree_skb(skb);
- pUmPacket->skbuff = nskb;
- return LM_STATUS_SUCCESS;
- }
- dev_kfree_skb(skb);
- pUmPacket->skbuff = 0;
- return LM_STATUS_FAILURE;
-}
-
-/* Returns 1 if not all buffers are allocated */
-STATIC int
-replenish_rx_buffers(PUM_DEVICE_BLOCK pUmDevice, int max)
-{
- PLM_PACKET pPacket;
- PUM_PACKET pUmPacket;
- PLM_DEVICE_BLOCK pDevice = (PLM_DEVICE_BLOCK) pUmDevice;
- struct sk_buff *skb;
- int queue_rx = 0;
- int alloc_cnt = 0;
- int ret = 0;
-
- while ((pUmPacket = (PUM_PACKET)
- QQ_PopHead(&pUmDevice->rx_out_of_buf_q.Container)) != 0) {
- pPacket = (PLM_PACKET) pUmPacket;
- if (pUmPacket->skbuff) {
- /* reuse an old skb */
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- queue_rx = 1;
- continue;
- }
-#ifdef BCM_WL_EMULATOR
- if ((skb = (struct sk_buff *)wlcemu_pktget(pDevice->wlc,pPacket->u.Rx.RxBufferSize + 2)) == 0)
-#else
- if ((skb = dev_alloc_skb(pPacket->u.Rx.RxBufferSize + 2 + EXTRA_HDR)) == 0)
-#endif /* BCM_WL_EMULATOR */
- {
- QQ_PushHead(&pUmDevice->rx_out_of_buf_q.Container,
- pPacket);
- ret = 1;
- break;
- }
- pUmPacket->skbuff = skb;
- skb->dev = pUmDevice->dev;
-#ifndef BCM_WL_EMULATOR
- skb_reserve(skb, EXTRA_HDR - pUmDevice->rx_buf_align);
-#endif
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- queue_rx = 1;
- if (max > 0) {
- alloc_cnt++;
- if (alloc_cnt >= max)
- break;
- }
- }
- if (queue_rx || pDevice->QueueAgain) {
- LM_QueueRxPackets(pDevice);
- }
- return ret;
-}
-
-LM_STATUS
-MM_IndicateTxPackets(PLM_DEVICE_BLOCK pDevice)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
- PLM_PACKET pPacket;
- PUM_PACKET pUmPacket;
- struct sk_buff *skb;
-#if !defined(NO_PCI_UNMAP) && MAX_SKB_FRAGS
- int i;
-#endif
-
- while (1) {
- pPacket = (PLM_PACKET)
- QQ_PopHead(&pDevice->TxPacketXmittedQ.Container);
- if (pPacket == 0)
- break;
- pUmPacket = (PUM_PACKET) pPacket;
- skb = pUmPacket->skbuff;
-#if !defined(NO_PCI_UNMAP)
- pci_unmap_single(pUmDevice->pdev,
- pci_unmap_addr(pUmPacket, map[0]),
- pci_unmap_len(pUmPacket, map_len[0]),
- PCI_DMA_TODEVICE);
-#if MAX_SKB_FRAGS
- for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
- pci_unmap_page(pUmDevice->pdev,
- pci_unmap_addr(pUmPacket, map[i + 1]),
- pci_unmap_len(pUmPacket, map_len[i + 1]),
- PCI_DMA_TODEVICE);
- }
-#endif
-#endif
- dev_kfree_skb_irq(skb);
- pUmPacket->skbuff = 0;
- QQ_PushTail(&pDevice->TxPacketFreeQ.Container, pPacket);
- }
- if (pUmDevice->tx_full) {
- if (QQ_GetEntryCnt(&pDevice->TxPacketFreeQ.Container) >=
- (pDevice->TxPacketDescCnt >> 1)) {
-
- pUmDevice->tx_full = 0;
- netif_wake_queue(pUmDevice->dev);
- }
- }
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_IndicateStatus(PLM_DEVICE_BLOCK pDevice, LM_STATUS Status)
-{
- PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
- struct net_device *dev = pUmDevice->dev;
- LM_FLOW_CONTROL flow_control;
- int speed = 0;
-
- if (!pUmDevice->opened)
- return LM_STATUS_SUCCESS;
-
- if (!pUmDevice->suspended) {
- if (Status == LM_STATUS_LINK_DOWN) {
- netif_carrier_off(dev);
- }
- else if (Status == LM_STATUS_LINK_ACTIVE) {
- netif_carrier_on(dev);
- }
- }
-
- if (pUmDevice->delayed_link_ind > 0) {
- pUmDevice->delayed_link_ind = 0;
- if (Status == LM_STATUS_LINK_DOWN) {
- B57_INFO(("%s: %s NIC Link is DOWN\n", bcm5700_driver, dev->name));
- }
- else if (Status == LM_STATUS_LINK_ACTIVE) {
- B57_INFO(("%s: %s NIC Link is UP, ", bcm5700_driver, dev->name));
- }
- }
- else {
- if (Status == LM_STATUS_LINK_DOWN) {
- B57_INFO(("%s: %s NIC Link is Down\n", bcm5700_driver, dev->name));
- }
- else if (Status == LM_STATUS_LINK_ACTIVE) {
- B57_INFO(("%s: %s NIC Link is Up, ", bcm5700_driver, dev->name));
- }
- }
-
- if (Status == LM_STATUS_LINK_ACTIVE) {
- if (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS)
- speed = 1000;
- else if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS)
- speed = 100;
- else if (pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)
- speed = 10;
-
- B57_INFO(("%d Mbps ", speed));
-
- if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL)
- B57_INFO(("full duplex"));
- else
- B57_INFO(("half duplex"));
-
- flow_control = pDevice->FlowControl &
- (LM_FLOW_CONTROL_RECEIVE_PAUSE |
- LM_FLOW_CONTROL_TRANSMIT_PAUSE);
- if (flow_control) {
- if (flow_control & LM_FLOW_CONTROL_RECEIVE_PAUSE) {
- B57_INFO((", receive "));
- if (flow_control & LM_FLOW_CONTROL_TRANSMIT_PAUSE)
- B57_INFO(("& transmit "));
- }
- else {
- B57_INFO((", transmit "));
- }
- B57_INFO(("flow control ON"));
- }
- B57_INFO(("\n"));
- }
- return LM_STATUS_SUCCESS;
-}
-
-void
-MM_UnmapRxDma(LM_DEVICE_BLOCK *pDevice, LM_PACKET *pPacket)
-{
-#if !defined(NO_PCI_UNMAP)
- UM_DEVICE_BLOCK *pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
- UM_PACKET *pUmPacket = (UM_PACKET *) pPacket;
-
- if (!pUmPacket->skbuff)
- return;
-
- pci_unmap_single(pUmDevice->pdev,
- pci_unmap_addr(pUmPacket, map[0]),
- pPacket->u.Rx.RxBufferSize,
- PCI_DMA_FROMDEVICE);
-#endif
-}
-
-LM_STATUS
-MM_FreeRxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
-{
- PUM_PACKET pUmPacket;
- struct sk_buff *skb;
-
- if (pPacket == 0)
- return LM_STATUS_SUCCESS;
- pUmPacket = (PUM_PACKET) pPacket;
- if ((skb = pUmPacket->skbuff)) {
- /* DMA address already unmapped */
- dev_kfree_skb(skb);
- }
- pUmPacket->skbuff = 0;
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_Sleep(LM_DEVICE_BLOCK *pDevice, LM_UINT32 msec)
-{
- current->state = TASK_INTERRUPTIBLE;
- if (schedule_timeout(HZ * msec / 1000) != 0) {
- return LM_STATUS_FAILURE;
- }
- if (signal_pending(current))
- return LM_STATUS_FAILURE;
-
- return LM_STATUS_SUCCESS;
-}
-
-void
-bcm5700_shutdown(UM_DEVICE_BLOCK *pUmDevice)
-{
- LM_DEVICE_BLOCK *pDevice = (LM_DEVICE_BLOCK *) pUmDevice;
-
- bcm5700_intr_off(pUmDevice);
- netif_carrier_off(pUmDevice->dev);
-#ifdef BCM_TASKLET
- tasklet_kill(&pUmDevice->tasklet);
-#endif
- bcm5700_poll_wait(pUmDevice);
-
- LM_Halt(pDevice);
-
- pDevice->InitDone = 0;
- bcm5700_free_remaining_rx_bufs(pUmDevice);
-}
-
-void
-bcm5700_free_remaining_rx_bufs(UM_DEVICE_BLOCK *pUmDevice)
-{
- LM_DEVICE_BLOCK *pDevice = &pUmDevice->lm_dev;
- UM_PACKET *pUmPacket;
- int cnt, i;
-
- cnt = QQ_GetEntryCnt(&pUmDevice->rx_out_of_buf_q.Container);
- for (i = 0; i < cnt; i++) {
- if ((pUmPacket =
- QQ_PopHead(&pUmDevice->rx_out_of_buf_q.Container))
- != 0) {
-
- MM_UnmapRxDma(pDevice, (LM_PACKET *) pUmPacket);
- MM_FreeRxBuffer(pDevice, &pUmPacket->lm_packet);
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container,
- pUmPacket);
- }
- }
-}
-
-void
-bcm5700_validate_param_range(UM_DEVICE_BLOCK *pUmDevice, int *param,
- char *param_name, int min, int max, int deflt)
-{
- if (((unsigned int) *param < (unsigned int) min) ||
- ((unsigned int) *param > (unsigned int) max)) {
-
- printk(KERN_WARNING "%s-%d: Invalid %s parameter (%u), using %u\n", bcm5700_driver, pUmDevice->index, param_name, (unsigned int) *param, (unsigned int) deflt);
- *param = deflt;
- }
-}
-
-struct net_device *
-bcm5700_find_peer(struct net_device *dev)
-{
- struct net_device *tmp_dev;
- UM_DEVICE_BLOCK *pUmDevice, *pUmTmp;
- LM_DEVICE_BLOCK *pDevice;
-
- tmp_dev = 0;
- pUmDevice = (UM_DEVICE_BLOCK *) dev->priv;
- pDevice = &pUmDevice->lm_dev;
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704) {
- tmp_dev = root_tigon3_dev;
- while (tmp_dev) {
- pUmTmp = (PUM_DEVICE_BLOCK) tmp_dev->priv;
- if ((tmp_dev != dev) &&
- (pUmDevice->pdev->bus->number ==
- pUmTmp->pdev->bus->number) &&
- PCI_SLOT(pUmDevice->pdev->devfn) ==
- PCI_SLOT(pUmTmp->pdev->devfn)) {
-
- break;
- }
- tmp_dev = pUmTmp->next_module;
- }
- }
- return tmp_dev;
-}
-
-LM_DEVICE_BLOCK *
-MM_FindPeerDev(LM_DEVICE_BLOCK *pDevice)
-{
- UM_DEVICE_BLOCK *pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
- struct net_device *dev = pUmDevice->dev;
- struct net_device *peer_dev;
-
- peer_dev = bcm5700_find_peer(dev);
- if (!peer_dev)
- return 0;
- return ((LM_DEVICE_BLOCK *) peer_dev->priv);
-}
-
-int MM_FindCapability(LM_DEVICE_BLOCK *pDevice, int capability)
-{
- UM_DEVICE_BLOCK *pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
- return (pci_find_capability(pUmDevice->pdev, capability));
-}
-
-#if defined(HAVE_POLL_CONTROLLER)||defined(CONFIG_NET_POLL_CONTROLLER)
-STATIC void
-poll_bcm5700(struct net_device *dev)
-{
- UM_DEVICE_BLOCK *pUmDevice = dev->priv;
-
-#if defined(RED_HAT_LINUX_KERNEL) && (LINUX_VERSION_CODE < 0x020605)
- if (netdump_mode) {
- bcm5700_interrupt(pUmDevice->pdev->irq, dev, NULL);
-#ifdef BCM_NAPI_RXPOLL
- if (dev->poll_list.prev) {
- int budget = 64;
-
- bcm5700_poll(dev, &budget);
- }
-#endif
- }
- else
-#endif
- {
- disable_irq(pUmDevice->pdev->irq);
- bcm5700_interrupt(pUmDevice->pdev->irq, dev, NULL);
- enable_irq(pUmDevice->pdev->irq);
- }
-}
-#endif
+++ /dev/null
-/*
- * local version of endian.h - byte order defines
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
-*/
-
-#ifndef _BCMENDIAN_H_
-#define _BCMENDIAN_H_
-
-#include <typedefs.h>
-
-/* Byte swap a 16 bit value */
-#define BCMSWAP16(val) \
- ((uint16)(\
- (((uint16)(val) & (uint16)0x00ffU) << 8) | \
- (((uint16)(val) & (uint16)0xff00U) >> 8)))
-
-/* Byte swap a 32 bit value */
-#define BCMSWAP32(val) \
- ((uint32)(\
- (((uint32)(val) & (uint32)0x000000ffUL) << 24) | \
- (((uint32)(val) & (uint32)0x0000ff00UL) << 8) | \
- (((uint32)(val) & (uint32)0x00ff0000UL) >> 8) | \
- (((uint32)(val) & (uint32)0xff000000UL) >> 24)))
-
-/* 2 Byte swap a 32 bit value */
-#define BCMSWAP32BY16(val) \
- ((uint32)(\
- (((uint32)(val) & (uint32)0x0000ffffUL) << 16) | \
- (((uint32)(val) & (uint32)0xffff0000UL) >> 16)))
-
-
-static INLINE uint16
-bcmswap16(uint16 val)
-{
- return BCMSWAP16(val);
-}
-
-static INLINE uint32
-bcmswap32(uint32 val)
-{
- return BCMSWAP32(val);
-}
-
-static INLINE uint32
-bcmswap32by16(uint32 val)
-{
- return BCMSWAP32BY16(val);
-}
-
-/* buf - start of buffer of shorts to swap */
-/* len - byte length of buffer */
-static INLINE void
-bcmswap16_buf(uint16 *buf, uint len)
-{
- len = len/2;
-
- while (len--) {
- *buf = bcmswap16(*buf);
- buf++;
- }
-}
-
-#ifndef hton16
-#ifndef IL_BIGENDIAN
-#define HTON16(i) BCMSWAP16(i)
-#define hton16(i) bcmswap16(i)
-#define hton32(i) bcmswap32(i)
-#define ntoh16(i) bcmswap16(i)
-#define ntoh32(i) bcmswap32(i)
-#define ltoh16(i) (i)
-#define ltoh32(i) (i)
-#define htol16(i) (i)
-#define htol32(i) (i)
-#else
-#define HTON16(i) (i)
-#define hton16(i) (i)
-#define hton32(i) (i)
-#define ntoh16(i) (i)
-#define ntoh32(i) (i)
-#define ltoh16(i) bcmswap16(i)
-#define ltoh32(i) bcmswap32(i)
-#define htol16(i) bcmswap16(i)
-#define htol32(i) bcmswap32(i)
-#endif /* IL_BIGENDIAN */
-#endif /* hton16 */
-
-#ifndef IL_BIGENDIAN
-#define ltoh16_buf(buf, i)
-#define htol16_buf(buf, i)
-#else
-#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-#endif /* IL_BIGENDIAN */
-
-/*
-* store 16-bit value to unaligned little endian byte array.
-*/
-static INLINE void
-htol16_ua_store(uint16 val, uint8 *bytes)
-{
- bytes[0] = val&0xff;
- bytes[1] = val>>8;
-}
-
-/*
-* store 32-bit value to unaligned little endian byte array.
-*/
-static INLINE void
-htol32_ua_store(uint32 val, uint8 *bytes)
-{
- bytes[0] = val&0xff;
- bytes[1] = (val>>8)&0xff;
- bytes[2] = (val>>16)&0xff;
- bytes[3] = val>>24;
-}
-
-/*
-* store 16-bit value to unaligned network(big) endian byte array.
-*/
-static INLINE void
-hton16_ua_store(uint16 val, uint8 *bytes)
-{
- bytes[1] = val&0xff;
- bytes[0] = val>>8;
-}
-
-/*
-* store 32-bit value to unaligned network(big) endian byte array.
-*/
-static INLINE void
-hton32_ua_store(uint32 val, uint8 *bytes)
-{
- bytes[3] = val&0xff;
- bytes[2] = (val>>8)&0xff;
- bytes[1] = (val>>16)&0xff;
- bytes[0] = val>>24;
-}
-
-/*
-* load 16-bit value from unaligned little endian byte array.
-*/
-static INLINE uint16
-ltoh16_ua(void *bytes)
-{
- return (((uint8*)bytes)[1]<<8)+((uint8 *)bytes)[0];
-}
-
-/*
-* load 32-bit value from unaligned little endian byte array.
-*/
-static INLINE uint32
-ltoh32_ua(void *bytes)
-{
- return (((uint8*)bytes)[3]<<24)+(((uint8*)bytes)[2]<<16)+
- (((uint8*)bytes)[1]<<8)+((uint8*)bytes)[0];
-}
-
-/*
-* load 16-bit value from unaligned big(network) endian byte array.
-*/
-static INLINE uint16
-ntoh16_ua(void *bytes)
-{
- return (((uint8*)bytes)[0]<<8)+((uint8*)bytes)[1];
-}
-
-/*
-* load 32-bit value from unaligned big(network) endian byte array.
-*/
-static INLINE uint32
-ntoh32_ua(void *bytes)
-{
- return (((uint8*)bytes)[0]<<24)+(((uint8*)bytes)[1]<<16)+
- (((uint8*)bytes)[2]<<8)+((uint8*)bytes)[3];
-}
-
-#define ltoh_ua(ptr) (\
- sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \
- sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] : \
- (((uint8 *)ptr)[3]<<24)+(((uint8 *)ptr)[2]<<16)+(((uint8 *)ptr)[1]<<8)+((uint8 *)ptr)[0] \
-)
-
-#define ntoh_ua(ptr) (\
- sizeof(*(ptr)) == sizeof(uint8) ? *(uint8 *)ptr : \
- sizeof(*(ptr)) == sizeof(uint16) ? (((uint8 *)ptr)[0]<<8)+((uint8 *)ptr)[1] : \
- (((uint8 *)ptr)[0]<<24)+(((uint8 *)ptr)[1]<<16)+(((uint8 *)ptr)[2]<<8)+((uint8 *)ptr)[3] \
-)
-
-#endif /* _BCMENDIAN_H_ */
+++ /dev/null
-/*
- * Misc system wide parameters.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-#ifndef _bcmparams_h_
-#define _bcmparams_h_
-
-#define VLAN_MAXVID 15 /* Max. VLAN ID supported/allowed */
-
-#define VLAN_NUMPRIS 8 /* # of prio, start from 0 */
-
-#define DEV_NUMIFS 16 /* Max. # of devices/interfaces supported */
-
-#define WL_MAXBSSCFG 16 /* maximum number of BSS Configs we can configure */
-
-#endif
+++ /dev/null
-/*
- * Broadcom BCM5325E/536x switch configuration module
- *
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Based on:
- * Broadcom 53xx RoboSwitch device driver.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- */
-
-
-#include <linux/autoconf.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-
-#include <typedefs.h>
-#include <osl.h>
-#include <sbutils.h>
-#include <sbconfig.h>
-#include <bcmendian.h>
-#include "bcmparams.h"
-#include <bcmnvram.h>
-#include <bcmdevs.h>
-#include "bcmrobo.h"
-#include "proto/ethernet.h"
-#include <switch-core.h>
-
-#define DRIVER_NAME "bcm57xx"
-#define DRIVER_VERSION "0.1"
-
-#ifndef GPIO_PIN_NOTDEFINED
-#define GPIO_PIN_NOTDEFINED 0x20
-#endif
-
-#ifdef BCMDBG
-#define ET_ERROR(args) printk args
-#else /* BCMDBG */
-#define ET_ERROR(args)
-#endif /* BCMDBG */
-#define ET_MSG(args)
-
-/*
- * Switch can be programmed through SPI interface, which
- * has a rreg and a wreg functions to read from and write to
- * registers.
- */
-
-/* MII access registers */
-#define PSEUDO_PHYAD 0x1E /* MII Pseudo PHY address */
-#define REG_MII_PAGE 0x10 /* MII Page register */
-#define REG_MII_ADDR 0x11 /* MII Address register */
-#define REG_MII_DATA0 0x18 /* MII Data register 0 */
-#define REG_MII_DATA1 0x19 /* MII Data register 1 */
-#define REG_MII_DATA2 0x1a /* MII Data register 2 */
-#define REG_MII_DATA3 0x1b /* MII Data register 3 */
-
-/* Page numbers */
-#define PAGE_CTRL 0x00 /* Control page */
-#define PAGE_MMR 0x02 /* 5397 Management/Mirroring page */
-#define PAGE_VTBL 0x05 /* ARL/VLAN Table access page */
-#define PAGE_VLAN 0x34 /* VLAN page */
-
-/* Control page registers */
-#define REG_CTRL_PORT0 0x00 /* Port 0 traffic control register */
-#define REG_CTRL_PORT1 0x01 /* Port 1 traffic control register */
-#define REG_CTRL_PORT2 0x02 /* Port 2 traffic control register */
-#define REG_CTRL_PORT3 0x03 /* Port 3 traffic control register */
-#define REG_CTRL_PORT4 0x04 /* Port 4 traffic control register */
-#define REG_CTRL_PORT5 0x05 /* Port 5 traffic control register */
-#define REG_CTRL_PORT6 0x06 /* Port 6 traffic control register */
-#define REG_CTRL_PORT7 0x07 /* Port 7 traffic control register */
-#define REG_CTRL_MODE 0x0B /* Switch Mode register */
-#define REG_CTRL_MIIPO 0x0E /* 5325: MII Port Override register */
-#define REG_CTRL_SRST 0x79 /* Software reset control register */
-
-#define REG_DEVICE_ID 0x30 /* 539x Device id: */
-#define DEVID5325 0x25 /* 5325 (Not really be we fake it) */
-#define DEVID5395 0x95 /* 5395 */
-#define DEVID5397 0x97 /* 5397 */
-#define DEVID5398 0x98 /* 5398 */
-#define DEVID53115 0x3115 /* 53115 */
-
-/* VLAN page registers */
-#define REG_VLAN_CTRL0 0x00 /* VLAN Control 0 register */
-#define REG_VLAN_CTRL1 0x01 /* VLAN Control 1 register */
-#define REG_VLAN_CTRL4 0x04 /* VLAN Control 4 register */
-#define REG_VLAN_CTRL5 0x05 /* VLAN Control 5 register */
-#define REG_VLAN_ACCESS 0x06 /* VLAN Table Access register */
-#define REG_VLAN_WRITE 0x08 /* VLAN Write register */
-#define REG_VLAN_READ 0x0C /* VLAN Read register */
-#define REG_VLAN_PTAG0 0x10 /* VLAN Default Port Tag register - port 0 */
-#define REG_VLAN_PTAG1 0x12 /* VLAN Default Port Tag register - port 1 */
-#define REG_VLAN_PTAG2 0x14 /* VLAN Default Port Tag register - port 2 */
-#define REG_VLAN_PTAG3 0x16 /* VLAN Default Port Tag register - port 3 */
-#define REG_VLAN_PTAG4 0x18 /* VLAN Default Port Tag register - port 4 */
-#define REG_VLAN_PTAG5 0x1a /* VLAN Default Port Tag register - port 5 */
-#define REG_VLAN_PTAG6 0x1c /* VLAN Default Port Tag register - port 6 */
-#define REG_VLAN_PTAG7 0x1e /* VLAN Default Port Tag register - port 7 */
-#define REG_VLAN_PTAG8 0x20 /* 539x: VLAN Default Port Tag register - IMP port */
-#define REG_VLAN_PMAP 0x20 /* 5325: VLAN Priority Re-map register */
-
-#define VLAN_NUMVLANS 16 /* # of VLANs */
-
-
-/* ARL/VLAN Table Access page registers */
-#define REG_VTBL_CTRL 0x00 /* ARL Read/Write Control */
-#define REG_VTBL_MINDX 0x02 /* MAC Address Index */
-#define REG_VTBL_VINDX 0x08 /* VID Table Index */
-#define REG_VTBL_ARL_E0 0x10 /* ARL Entry 0 */
-#define REG_VTBL_ARL_E1 0x18 /* ARL Entry 1 */
-#define REG_VTBL_DAT_E0 0x18 /* ARL Table Data Entry 0 */
-#define REG_VTBL_SCTRL 0x20 /* ARL Search Control */
-#define REG_VTBL_SADDR 0x22 /* ARL Search Address */
-#define REG_VTBL_SRES 0x24 /* ARL Search Result */
-#define REG_VTBL_SREXT 0x2c /* ARL Search Result */
-#define REG_VTBL_VID_E0 0x30 /* VID Entry 0 */
-#define REG_VTBL_VID_E1 0x32 /* VID Entry 1 */
-#define REG_VTBL_PREG 0xFF /* Page Register */
-#define REG_VTBL_ACCESS 0x60 /* VLAN table access register */
-#define REG_VTBL_INDX 0x61 /* VLAN table address index register */
-#define REG_VTBL_ENTRY 0x63 /* VLAN table entry register */
-#define REG_VTBL_ACCESS_5395 0x80 /* VLAN table access register */
-#define REG_VTBL_INDX_5395 0x81 /* VLAN table address index register */
-#define REG_VTBL_ENTRY_5395 0x83 /* VLAN table entry register */
-
-/* SPI registers */
-#define REG_SPI_PAGE 0xff /* SPI Page register */
-
-/* Access switch registers through GPIO/SPI */
-
-/* Minimum timing constants */
-#define SCK_EDGE_TIME 2 /* clock edge duration - 2us */
-#define MOSI_SETUP_TIME 1 /* input setup duration - 1us */
-#define SS_SETUP_TIME 1 /* select setup duration - 1us */
-
-/* misc. constants */
-#define SPI_MAX_RETRY 100
-
-static int config_attach(robo_info_t *robo);
-static void config_detach(robo_info_t *robo);
-
-/* Enable GPIO access to the chip */
-static void
-gpio_enable(robo_info_t *robo)
-{
- /* Enable GPIO outputs with SCK and MOSI low, SS high */
- sb_gpioout(robo->sbh, robo->ss | robo->sck | robo->mosi, robo->ss, GPIO_DRV_PRIORITY);
- sb_gpioouten(robo->sbh, robo->ss | robo->sck | robo->mosi,
- robo->ss | robo->sck | robo->mosi, GPIO_DRV_PRIORITY);
-}
-
-/* Disable GPIO access to the chip */
-static void
-gpio_disable(robo_info_t *robo)
-{
- /* Disable GPIO outputs with all their current values */
- sb_gpioouten(robo->sbh, robo->ss | robo->sck | robo->mosi, 0, GPIO_DRV_PRIORITY);
-}
-
-/* Write a byte stream to the chip thru SPI */
-static int
-spi_write(robo_info_t *robo, uint8 *buf, uint len)
-{
- uint i;
- uint8 mask;
-
- /* Byte bang from LSB to MSB */
- for (i = 0; i < len; i++) {
- /* Bit bang from MSB to LSB */
- for (mask = 0x80; mask; mask >>= 1) {
- /* Clock low */
- sb_gpioout(robo->sbh, robo->sck, 0, GPIO_DRV_PRIORITY);
- OSL_DELAY(SCK_EDGE_TIME);
-
- /* Sample on rising edge */
- if (mask & buf[i])
- sb_gpioout(robo->sbh, robo->mosi, robo->mosi, GPIO_DRV_PRIORITY);
- else
- sb_gpioout(robo->sbh, robo->mosi, 0, GPIO_DRV_PRIORITY);
- OSL_DELAY(MOSI_SETUP_TIME);
-
- /* Clock high */
- sb_gpioout(robo->sbh, robo->sck, robo->sck, GPIO_DRV_PRIORITY);
- OSL_DELAY(SCK_EDGE_TIME);
- }
- }
-
- return 0;
-}
-
-/* Read a byte stream from the chip thru SPI */
-static int
-spi_read(robo_info_t *robo, uint8 *buf, uint len)
-{
- uint i, timeout;
- uint8 rack, mask, byte;
-
- /* Timeout after 100 tries without RACK */
- for (i = 0, rack = 0, timeout = SPI_MAX_RETRY; i < len && timeout;) {
- /* Bit bang from MSB to LSB */
- for (mask = 0x80, byte = 0; mask; mask >>= 1) {
- /* Clock low */
- sb_gpioout(robo->sbh, robo->sck, 0, GPIO_DRV_PRIORITY);
- OSL_DELAY(SCK_EDGE_TIME);
-
- /* Sample on falling edge */
- if (sb_gpioin(robo->sbh) & robo->miso)
- byte |= mask;
-
- /* Clock high */
- sb_gpioout(robo->sbh, robo->sck, robo->sck, GPIO_DRV_PRIORITY);
- OSL_DELAY(SCK_EDGE_TIME);
- }
- /* RACK when bit 0 is high */
- if (!rack) {
- rack = (byte & 1);
- timeout--;
- continue;
- }
- /* Byte bang from LSB to MSB */
- buf[i] = byte;
- i++;
- }
-
- if (timeout == 0) {
- ET_ERROR(("spi_read: timeout"));
- return -1;
- }
-
- return 0;
-}
-
-/* Enable/disable SPI access */
-static void
-spi_select(robo_info_t *robo, uint8 spi)
-{
- if (spi) {
- /* Enable SPI access */
- sb_gpioout(robo->sbh, robo->ss, 0, GPIO_DRV_PRIORITY);
- } else {
- /* Disable SPI access */
- sb_gpioout(robo->sbh, robo->ss, robo->ss, GPIO_DRV_PRIORITY);
- }
- OSL_DELAY(SS_SETUP_TIME);
-}
-
-
-/* Select chip and page */
-static void
-spi_goto(robo_info_t *robo, uint8 page)
-{
- uint8 reg8 = REG_SPI_PAGE; /* page select register */
- uint8 cmd8;
-
- /* Issue the command only when we are on a different page */
- if (robo->page == page)
- return;
-
- robo->page = page;
-
- /* Enable SPI access */
- spi_select(robo, 1);
-
- /* Select new page with CID 0 */
- cmd8 = ((6 << 4) | /* normal SPI */
- 1); /* write */
- spi_write(robo, &cmd8, 1);
- spi_write(robo, ®8, 1);
- spi_write(robo, &page, 1);
-
- /* Disable SPI access */
- spi_select(robo, 0);
-}
-
-/* Write register thru SPI */
-static int
-spi_wreg(robo_info_t *robo, uint8 page, uint8 addr, void *val, int len)
-{
- int status = 0;
- uint8 cmd8;
- union {
- uint8 val8;
- uint16 val16;
- uint32 val32;
- } bytes;
-
- /* validate value length and buffer address */
- ASSERT(len == 1 || (len == 2 && !((int)val & 1)) ||
- (len == 4 && !((int)val & 3)));
-
- /* Select chip and page */
- spi_goto(robo, page);
-
- /* Enable SPI access */
- spi_select(robo, 1);
-
- /* Write with CID 0 */
- cmd8 = ((6 << 4) | /* normal SPI */
- 1); /* write */
- spi_write(robo, &cmd8, 1);
- spi_write(robo, &addr, 1);
- switch (len) {
- case 1:
- bytes.val8 = *(uint8 *)val;
- break;
- case 2:
- bytes.val16 = htol16(*(uint16 *)val);
- break;
- case 4:
- bytes.val32 = htol32(*(uint32 *)val);
- break;
- }
- spi_write(robo, (uint8 *)val, len);
-
- ET_MSG(("%s: [0x%x-0x%x] := 0x%x (len %d)\n", __FUNCTION__, page, addr,
- *(uint16 *)val, len));
- /* Disable SPI access */
- spi_select(robo, 0);
- return status;
-}
-
-/* Read register thru SPI in fast SPI mode */
-static int
-spi_rreg(robo_info_t *robo, uint8 page, uint8 addr, void *val, int len)
-{
- int status = 0;
- uint8 cmd8;
- union {
- uint8 val8;
- uint16 val16;
- uint32 val32;
- } bytes;
-
- /* validate value length and buffer address */
- ASSERT(len == 1 || (len == 2 && !((int)val & 1)) ||
- (len == 4 && !((int)val & 3)));
-
- /* Select chip and page */
- spi_goto(robo, page);
-
- /* Enable SPI access */
- spi_select(robo, 1);
-
- /* Fast SPI read with CID 0 and byte offset 0 */
- cmd8 = (1 << 4); /* fast SPI */
- spi_write(robo, &cmd8, 1);
- spi_write(robo, &addr, 1);
- status = spi_read(robo, (uint8 *)&bytes, len);
- switch (len) {
- case 1:
- *(uint8 *)val = bytes.val8;
- break;
- case 2:
- *(uint16 *)val = ltoh16(bytes.val16);
- break;
- case 4:
- *(uint32 *)val = ltoh32(bytes.val32);
- break;
- }
-
- ET_MSG(("%s: [0x%x-0x%x] => 0x%x (len %d)\n", __FUNCTION__, page, addr,
- *(uint16 *)val, len));
-
- /* Disable SPI access */
- spi_select(robo, 0);
- return status;
-}
-
-/* SPI/gpio interface functions */
-static dev_ops_t spigpio = {
- gpio_enable,
- gpio_disable,
- spi_wreg,
- spi_rreg,
- "SPI (GPIO)"
-};
-
-
-/* Access switch registers through MII (MDC/MDIO) */
-
-#define MII_MAX_RETRY 100
-
-/* Write register thru MDC/MDIO */
-static int
-mii_wreg(robo_info_t *robo, uint8 page, uint8 reg, void *val, int len)
-{
- uint16 cmd16, val16,val48[3];
- void *h = robo->h;
- uint32 val64[2];
- memset(val48,0,6);
- memset(val64,0,8);
- int i;
- uint8 *ptr = (uint8 *)val;
-
- /* validate value length and buffer address */
- ASSERT(len == 1 || len == 6 || len == 8 ||
- ((len == 2) && !((int)val & 1)) || ((len == 4) && !((int)val & 3)));
-
- ET_MSG(("%s: [0x%x-0x%x] := 0x%x (len %d)\n", __FUNCTION__, page, reg,
- *(uint16 *)val, len));
-
- /* set page number - MII register 0x10 */
- if (robo->page != page) {
- cmd16 = ((page << 8) | /* page number */
- 1); /* mdc/mdio access enable */
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_PAGE, cmd16);
- robo->page = page;
- }
-
- switch (len) {
- case 8:
- val16 = ptr[7];
- val16 = ((val16 << 8) | ptr[6]);
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA3, val16);
- /* FALLTHRU */
-
- case 6:
- val16 = ptr[5];
- val16 = ((val16 << 8) | ptr[4]);
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA2, val16);
- val16 = ptr[3];
- val16 = ((val16 << 8) | ptr[2]);
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA1, val16);
- val16 = ptr[1];
- val16 = ((val16 << 8) | ptr[0]);
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
- break;
-
- case 4:
- val16 = (uint16)((*(uint32 *)val) >> 16);
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA1, val16);
- val16 = (uint16)(*(uint32 *)val);
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
- break;
-
- case 2:
- val16 = *(uint16 *)val;
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
- break;
-
- case 1:
- val16 = *(uint8 *)val;
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_DATA0, val16);
- break;
- }
-
- /* set register address - MII register 0x11 */
- cmd16 = ((reg << 8) | /* register address */
- 1); /* opcode write */
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_ADDR, cmd16);
-
- /* is operation finished? */
- for (i = MII_MAX_RETRY; i > 0; i --) {
- val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_ADDR);
- if ((val16 & 3) == 0)
- break;
- }
-
- /* timed out */
- if (!i) {
- ET_ERROR(("mii_wreg: timeout"));
- return -1;
- }
- return 0;
-}
-
-/* Read register thru MDC/MDIO */
-static int
-mii_rreg(robo_info_t *robo, uint8 page, uint8 reg, void *val, int len)
-{
- uint16 cmd16, val16;
- void *h = robo->h;
- int i;
- uint8 *ptr = (uint8 *)val;
-
- /* validate value length and buffer address */
- ASSERT(len == 1 || len == 6 || len == 8 ||
- ((len == 2) && !((int)val & 1)) || ((len == 4) && !((int)val & 3)));
-
- /* set page number - MII register 0x10 */
- if (robo->page != page) {
- cmd16 = ((page << 8) | /* page number */
- 1); /* mdc/mdio access enable */
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_PAGE, cmd16);
- robo->page = page;
- }
-
- /* set register address - MII register 0x11 */
- cmd16 = ((reg << 8) | /* register address */
- 2); /* opcode read */
- robo->miiwr(h, PSEUDO_PHYAD, REG_MII_ADDR, cmd16);
-
- /* is operation finished? */
- for (i = MII_MAX_RETRY; i > 0; i --) {
- val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_ADDR);
- if ((val16 & 3) == 0)
- break;
- }
- /* timed out */
- if (!i) {
- ET_ERROR(("mii_rreg: timeout"));
- return -1;
- }
-
- ET_MSG(("%s: [0x%x-0x%x] => 0x%x (len %d)\n", __FUNCTION__, page, reg, val16, len));
-
- switch (len) {
- case 8:
- val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA3);
- ptr[7] = (val16 >> 8);
- ptr[6] = (val16 & 0xff);
- /* FALLTHRU */
-
- case 6:
- val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA2);
- ptr[5] = (val16 >> 8);
- ptr[4] = (val16 & 0xff);
- val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA1);
- ptr[3] = (val16 >> 8);
- ptr[2] = (val16 & 0xff);
- val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
- ptr[1] = (val16 >> 8);
- ptr[0] = (val16 & 0xff);
- break;
-
- case 4:
- val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA1);
- *(uint32 *)val = (((uint32)val16) << 16);
- val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
- *(uint32 *)val |= val16;
- break;
-
- case 2:
- val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
- *(uint16 *)val = val16;
- break;
- case 1:
- val16 = robo->miird(h, PSEUDO_PHYAD, REG_MII_DATA0);
- *(uint8 *)val = (uint8)(val16 & 0xff);
- break;
- }
-
- return 0;
-}
-
-/* MII interface functions */
-static dev_ops_t mdcmdio = {
- NULL,
- NULL,
- mii_wreg,
- mii_rreg,
- "MII (MDC/MDIO)"
-};
-
-/* High level switch configuration functions. */
-
-static int
-findmatch(char *string, char *name)
-{
- uint len;
- char *c;
-
- len = strlen(name);
- /* CSTYLED */
- while ((c = strchr(string, ',')) != NULL) {
- if (len == (uint)(c - string) && !strncmp(string, name, len))
- return 1;
- string = c + 1;
- }
-
- return (!strcmp(string, name));
-}
-
-static uint
-getgpiopin(char *vars, char *pin_name, uint def_pin)
-{
- char name[] = "gpioXXXX";
- char *val;
- uint pin;
-
- /* Go thru all possibilities till a match in pin name */
- for (pin = 0; pin < GPIO_NUMPINS; pin ++) {
- snprintf(name, sizeof(name), "gpio%d", pin);
- val = getvar(vars, name);
- if (val && findmatch(val, pin_name))
- return pin;
- }
-
- if (def_pin != GPIO_PIN_NOTDEFINED) {
- /* make sure the default pin is not used by someone else */
- snprintf(name, sizeof(name), "gpio%d", def_pin);
- if (getvar(vars, name)) {
- def_pin = GPIO_PIN_NOTDEFINED;
- }
- }
-
- return def_pin;
-}
-
-
-/* Port flags */
-#define FLAG_TAGGED 't' /* output tagged (external ports only) */
-#define FLAG_UNTAG 'u' /* input & output untagged (CPU port only, for OS (linux, ...) */
-#define FLAG_LAN '*' /* input & output untagged (CPU port only, for CFE */
-
-/* port descriptor */
-typedef struct {
- uint32 untag; /* untag enable bit (Page 0x05 Address 0x63-0x66 Bit[17:9]) */
- uint32 member; /* vlan member bit (Page 0x05 Address 0x63-0x66 Bit[7:0]) */
- uint8 ptagr; /* port tag register address (Page 0x34 Address 0x10-0x1F) */
- uint8 cpu; /* is this cpu port? */
-} pdesc_t;
-
-pdesc_t pdesc97[] = {
- /* 5395/5397/5398 is 0 ~ 7. port 8 is IMP port. */
- /* port 0 */ {1 << 9, 1 << 0, REG_VLAN_PTAG0, 0},
- /* port 1 */ {1 << 10, 1 << 1, REG_VLAN_PTAG1, 0},
- /* port 2 */ {1 << 11, 1 << 2, REG_VLAN_PTAG2, 0},
- /* port 3 */ {1 << 12, 1 << 3, REG_VLAN_PTAG3, 0},
- /* port 4 */ {1 << 13, 1 << 4, REG_VLAN_PTAG4, 0},
- /* port 5 */ {1 << 14, 1 << 5, REG_VLAN_PTAG5, 0},
- /* port 6 */ {1 << 15, 1 << 6, REG_VLAN_PTAG6, 0},
- /* port 7 */ {1 << 16, 1 << 7, REG_VLAN_PTAG7, 0},
- /* mii port */ {1 << 17, 1 << 8, REG_VLAN_PTAG8, 1},
-};
-
-pdesc_t pdesc25[] = {
- /* port 0 */ {1 << 6, 1 << 0, REG_VLAN_PTAG0, 0},
- /* port 1 */ {1 << 7, 1 << 1, REG_VLAN_PTAG1, 0},
- /* port 2 */ {1 << 8, 1 << 2, REG_VLAN_PTAG2, 0},
- /* port 3 */ {1 << 9, 1 << 3, REG_VLAN_PTAG3, 0},
- /* port 4 */ {1 << 10, 1 << 4, REG_VLAN_PTAG4, 0},
- /* mii port */ {1 << 11, 1 << 5, REG_VLAN_PTAG5, 1},
-};
-
-
-#define to_robo(driver) ((robo_info_t *) ((switch_driver *) driver)->priv)
-#define ROBO_START(driver) \
- do { \
- robo_info_t *robo = to_robo(driver); \
- if (robo->ops->enable_mgmtif) \
- robo->ops->enable_mgmtif(robo)
-
-#define ROBO_END(driver) \
- if (robo->ops->disable_mgmtif) \
- robo->ops->disable_mgmtif(robo); \
- } while (0)
-
-int
-bcm_robo_reset(robo_info_t *robo)
-{
- int i, max_port_ind;
- uint8 val8;
- uint16 val16;
- uint32 val32;
- pdesc_t *pdesc;
- int pdescsz;
-
-/* printk(KERN_WARNING "bcmrobo.c: bcm_robo_reset\n"); */
-
- if (robo->ops->enable_mgmtif)
- robo->ops->enable_mgmtif(robo);
-
- /* setup global vlan configuration, FIXME: necessary? */
- /* VLAN Control 0 Register (Page 0x34, Address 0) */
- val8 = ((1 << 7) | /* enable 802.1Q VLAN */
- (3 << 5)); /* individual VLAN learning mode */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
-
- /* VLAN Control 1 Register (Page 0x34, Address 1) */
- robo->ops->read_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
- val8 |= ((1 << 2) | /* enable RSV multicast V Fwdmap */
- (1 << 3)); /* enable RSV multicast V Untagmap */
- if (robo->devid == DEVID5325)
- val8 |= (1 << 1); /* enable RSV multicast V Tagging */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL1, &val8, sizeof(val8));
-
- bcm_robo_set_macaddr(robo, NULL);
-
- if (robo->devid == DEVID5325) {
- /* VLAN Control 4 Register (Page 0x34, Address 4) */
- val8 = (1 << 6); /* drop frame with VID violation */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL4, &val8, sizeof(val8));
-
- /* VLAN Control 5 Register (Page 0x34, Address 5) */
- val8 = (1 << 3); /* drop frame when miss V table */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL5, &val8, sizeof(val8));
-
- pdesc = pdesc25;
- pdescsz = sizeof(pdesc25) / sizeof(pdesc_t);
- } else {
- pdesc = pdesc97;
- pdescsz = sizeof(pdesc97) / sizeof(pdesc_t);
- }
-
- if (robo->devid == DEVID5325) {
- /* setup priority mapping - applies to tagged ingress frames */
- /* Priority Re-map Register (Page 0x34, Address 0x20-0x23) */
- /* FIXME: un-hardcode */
- val32 = ((0 << 0) | /* 0 -> 0 */
- (1 << 3) | /* 1 -> 1 */
- (2 << 6) | /* 2 -> 2 */
- (3 << 9) | /* 3 -> 3 */
- (4 << 12) | /* 4 -> 4 */
- (5 << 15) | /* 5 -> 5 */
- (6 << 18) | /* 6 -> 6 */
- (7 << 21)); /* 7 -> 7 */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_PMAP, &val32, sizeof(val32));
- }
-
- /* Set unmanaged mode */
- robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
- val8 &= (~(1 << 0));
- robo->ops->write_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
-
- /* No spanning tree for unmanaged mode */
- val8 = 0;
- max_port_ind = ((robo->devid == DEVID5398) ? REG_CTRL_PORT7 : REG_CTRL_PORT4);
- for (i = REG_CTRL_PORT0; i <= max_port_ind; i++) {
- robo->ops->write_reg(robo, PAGE_CTRL, i, &val8, sizeof(val8));
- }
-
- /* WAN port LED */
- val16 = 0x1f;
- robo->ops->write_reg(robo, PAGE_CTRL, 0x16, &val16, 2);
-
- if (robo->ops->enable_mgmtif)
- robo->ops->disable_mgmtif(robo);
-
- return 0;
-}
-
-/* Get access to the RoboSwitch */
-robo_info_t *
-bcm_robo_attach(sb_t *sbh, void *h, char *name, char *vars, miird_f miird, miiwr_f miiwr)
-{
- robo_info_t *robo;
- uint32 reset, idx;
- uint8 val8;
- uint16 val16;
-
- /* Allocate and init private state */
- if (!(robo = MALLOC(sb_osh(sbh), sizeof(robo_info_t)))) {
- ET_ERROR(("robo_attach: out of memory, malloced %d bytes", MALLOCED(sb_osh(sbh))));
- return NULL;
- }
- bzero(robo, sizeof(robo_info_t));
-
- robo->h = h;
- robo->sbh = sbh;
- robo->vars = vars;
- robo->miird = miird;
- robo->miiwr = miiwr;
- robo->page = -1;
- robo->name = name;
-
- /* Trigger external reset by nvram variable existance */
- if ((reset = getgpiopin(robo->vars, "robo_reset", GPIO_PIN_NOTDEFINED)) !=
- GPIO_PIN_NOTDEFINED) {
- /*
- * Reset sequence: RESET low(50ms)->high(20ms)
- *
- * We have to perform a full sequence for we don't know how long
- * it has been from power on till now.
- */
- ET_MSG(("%s: Using external reset in gpio pin %d\n", __FUNCTION__, reset));
- reset = 1 << reset;
-
- /* Keep RESET low for 50 ms */
- sb_gpioout(robo->sbh, reset, 0, GPIO_DRV_PRIORITY);
- sb_gpioouten(robo->sbh, reset, reset, GPIO_DRV_PRIORITY);
- bcm_mdelay(50);
-
- /* Keep RESET high for at least 20 ms */
- sb_gpioout(robo->sbh, reset, reset, GPIO_DRV_PRIORITY);
- bcm_mdelay(20);
- } else {
- /* In case we need it */
- idx = sb_coreidx(robo->sbh);
-
- if (sb_setcore(robo->sbh, SB_ROBO, 0)) {
- /* If we have an internal robo core, reset it using sb_core_reset */
- ET_MSG(("%s: Resetting internal robo core\n", __FUNCTION__));
- sb_core_reset(robo->sbh, 0, 0);
- }
-
- sb_setcoreidx(robo->sbh, idx);
- }
-
- if (miird && miiwr) {
- uint16 tmp;
- int rc, retry_count = 0;
-
- /* Read the PHY ID */
- tmp = miird(h, PSEUDO_PHYAD, 2);
- if (tmp != 0xffff) {
- do {
- rc = mii_rreg(robo, PAGE_MMR, REG_DEVICE_ID, \
- &robo->devid, sizeof(uint16));
- if (rc != 0)
- break;
- retry_count++;
- } while ((robo->devid == 0) && (retry_count < 10));
-
- ET_MSG(("%s: devid read %ssuccesfully via mii: 0x%x\n", __FUNCTION__, \
- rc ? "un" : "", robo->devid));
- ET_MSG(("%s: mii access to switch works\n", __FUNCTION__));
- robo->ops = &mdcmdio;
- if ((rc != 0) || (robo->devid == 0)) {
- ET_MSG(("%s: error reading devid, assuming 5325e\n", __FUNCTION__));
- robo->devid = DEVID5325;
- }
- ET_MSG(("%s: devid: 0x%x\n", __FUNCTION__, robo->devid));
- }
- }
-
- if ((robo->devid == DEVID5395) ||
- (robo->devid == DEVID5397) ||
- (robo->devid == DEVID5398)) {
- uint8 srst_ctrl;
-
- /* If it is a 539x switch, use the soft reset register */
- ET_MSG(("%s: Resetting 539x robo switch\n", __FUNCTION__));
-
- /* Reset the 539x switch core and register file */
- srst_ctrl = 0x83;
- mii_wreg(robo, PAGE_CTRL, REG_CTRL_SRST, &srst_ctrl, sizeof(uint8));
-
- bcm_mdelay(500);
-
- srst_ctrl = 0x00;
- mii_wreg(robo, PAGE_CTRL, REG_CTRL_SRST, &srst_ctrl, sizeof(uint8));
- }
-
- if (!robo->ops) {
- int mosi, miso, ss, sck;
-
- robo->ops = &spigpio;
- robo->devid = DEVID5325;
-
- /* Init GPIO mapping. Default 2, 3, 4, 5 */
- ss = getgpiopin(vars, "robo_ss", 2);
- if (ss == GPIO_PIN_NOTDEFINED) {
- ET_ERROR(("robo_attach: robo_ss gpio fail: GPIO 2 in use"));
- goto error;
- }
- robo->ss = 1 << ss;
- sck = getgpiopin(vars, "robo_sck", 3);
- if (sck == GPIO_PIN_NOTDEFINED) {
- ET_ERROR(("robo_attach: robo_sck gpio fail: GPIO 3 in use"));
- goto error;
- }
- robo->sck = 1 << sck;
- mosi = getgpiopin(vars, "robo_mosi", 4);
- if (mosi == GPIO_PIN_NOTDEFINED) {
- ET_ERROR(("robo_attach: robo_mosi gpio fail: GPIO 4 in use"));
- goto error;
- }
- robo->mosi = 1 << mosi;
- miso = getgpiopin(vars, "robo_miso", 5);
- if (miso == GPIO_PIN_NOTDEFINED) {
- ET_ERROR(("robo_attach: robo_miso gpio fail: GPIO 5 in use"));
- goto error;
- }
- robo->miso = 1 << miso;
- ET_MSG(("%s: ss %d sck %d mosi %d miso %d\n", __FUNCTION__,
- ss, sck, mosi, miso));
- }
-
- /* sanity check */
- ASSERT(robo->ops);
- ASSERT(robo->ops->write_reg);
- ASSERT(robo->ops->read_reg);
- ASSERT((robo->devid == DEVID5325) ||
- (robo->devid == DEVID5395) ||
- (robo->devid == DEVID5397) ||
- (robo->devid == DEVID5398) ||
- (robo->devid == DEVID53115));
-
- bcm_robo_reset(robo);
- config_attach(robo);
-
- return robo;
-
-error:
- MFREE(sb_osh(robo->sbh), robo, sizeof(robo_info_t));
- return NULL;
-}
-
-/* Release access to the RoboSwitch */
-void
-bcm_robo_detach(robo_info_t *robo)
-{
- config_detach(robo);
- MFREE(sb_osh(robo->sbh), robo, sizeof(robo_info_t));
-}
-
-/* Enable the device and set it to a known good state */
-int
-bcm_robo_enable_device(robo_info_t *robo)
-{
- uint8 reg_offset, reg_val;
- int ret = 0;
-
- /* Enable management interface access */
- if (robo->ops->enable_mgmtif)
- robo->ops->enable_mgmtif(robo);
-
- if (robo->devid == DEVID5398) {
- /* Disable unused ports: port 6 and 7 */
- for (reg_offset = REG_CTRL_PORT6; reg_offset <= REG_CTRL_PORT7; reg_offset ++) {
- /* Set bits [1:0] to disable RX and TX */
- reg_val = 0x03;
- robo->ops->write_reg(robo, PAGE_CTRL, reg_offset, ®_val,
- sizeof(reg_val));
- }
- }
-
- if (robo->devid == DEVID5325) {
- /* Must put the switch into Reverse MII mode! */
-
- /* MII port state override (page 0 register 14) */
- robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MIIPO, ®_val, sizeof(reg_val));
-
- /* Bit 4 enables reverse MII mode */
- if (!(reg_val & (1 << 4))) {
- /* Enable RvMII */
- reg_val |= (1 << 4);
- robo->ops->write_reg(robo, PAGE_CTRL, REG_CTRL_MIIPO, ®_val,
- sizeof(reg_val));
-
- /* Read back */
- robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MIIPO, ®_val,
- sizeof(reg_val));
- if (!(reg_val & (1 << 4))) {
- ET_ERROR(("robo_enable_device: enabling RvMII mode failed\n"));
- ret = -1;
- }
- }
- }
-
- /* Disable management interface access */
- if (robo->ops->disable_mgmtif)
- robo->ops->disable_mgmtif(robo);
-
- return ret;
-}
-
-
-void bcm_robo_set_macaddr(robo_info_t *robo, char *mac_addr)
-{
- uint8 arl_entry[8] = { 0 }, arl_entry1[8] = { 0 };
-
- if (mac_addr != NULL)
- memcpy(robo->macaddr, mac_addr, 6);
-
- mac_addr = robo->macaddr;
-
- /* setup mac address */
- arl_entry[0] = mac_addr[5];
- arl_entry[1] = mac_addr[4];
- arl_entry[2] = mac_addr[3];
- arl_entry[3] = mac_addr[2];
- arl_entry[4] = mac_addr[1];
- arl_entry[5] = mac_addr[0];
-
- if (robo->devid == DEVID5325) {
- /* Init the entry 1 of the bin */
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E1, \
- arl_entry1, sizeof(arl_entry1));
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VID_E1, \
- arl_entry1, 1);
-
- /* Init the entry 0 of the bin */
- arl_entry[6] = 0x8; /* Port Id: MII */
- arl_entry[7] = 0xc0; /* Static Entry, Valid */
-
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E0, \
- arl_entry, sizeof(arl_entry));
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
- arl_entry, ETHER_ADDR_LEN);
-
- } else {
- /* Initialize the MAC Addr Index Register */
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
- arl_entry, ETHER_ADDR_LEN);
- }
-}
-
-static int handle_reset(void *driver, char *buf, int nr)
-{
- ROBO_START(driver);
- bcm_robo_reset(robo);
- ROBO_END(driver);
-
- return 0;
-}
-
-
-static int handle_enable_read(void *driver, char *buf, int nr)
-{
- int ret;
- uint8 val8;
-
- ROBO_START(driver);
- robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
- ret = sprintf(buf, "%d\n", !!(val8 & (1 << 1)));
- ROBO_END(driver);
-
- return ret;
-}
-
-static int handle_enable_write(void *driver, char *buf, int nr)
-{
- uint8 val8;
-
-/* printk(KERN_WARNING "bcmrobo.c: handle_enable_write\n"); */
-
- ROBO_START(driver);
- robo->ops->read_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
- val8 &= ~(1 << 1);
- val8 |= ((buf[0] == '1') << 1);
- robo->ops->write_reg(robo, PAGE_CTRL, REG_CTRL_MODE, &val8, sizeof(val8));
- ROBO_END(driver);
-
- return 0;
-}
-
-static int handle_enable_vlan_read(void *driver, char *buf, int nr)
-{
- uint8 val8;
-
- ROBO_START(driver);
- robo->ops->read_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
- ROBO_END(driver);
-
- return sprintf(buf, "%d\n", (((val8 & (1 << 7)) == (1 << 7)) ? 1 : 0));
-}
-static int handle_enable_vlan_write(void *driver, char *buf, int nr)
-{
- int disable = ((buf[0] != '1') ? 1 : 0);
-
- uint8 val8;
- uint16 val16;
- pdesc_t *pdesc;
- int pdescsz;
- uint16 vid;
- uint8 arl_entry[8] = { 0 }, arl_entry1[8] = { 0 };
-
-/* printk(KERN_WARNING "bcmrobo.c: handle_enable_vlan_write\n"); */
-
- ROBO_START(driver);
-
- /* setup global vlan configuration */
- /* VLAN Control 0 Register (Page 0x34, Address 0) */
- val8 = disable ? 0 :
- ((1 << 7) | /* enable/disable 802.1Q VLAN */
- (3 << 5)); /* individual VLAN learning mode */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL0, &val8, sizeof(val8));
-
- /* VLAN Control 1 Register (Page 0x34, Address 1) */
- val8 = disable ? 0 :
- ((1 << 2) | /* enable/disable RSV multicast V Fwdmap */
- (1 << 3)); /* enable/disable RSV multicast V Untagmap */
- if (robo->devid == DEVID5325)
- val8 |= disable ? 0 : (1 << 1); /* enable/disable RSV multicast V Tagging */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL1, &val8, sizeof(val8));
-
- if ( disable == 0 ) { /* FIXME: ok to stop here when disabling? */
- arl_entry[0] = robo->macaddr[5];
- arl_entry[1] = robo->macaddr[4];
- arl_entry[2] = robo->macaddr[3];
- arl_entry[3] = robo->macaddr[2];
- arl_entry[4] = robo->macaddr[1];
- arl_entry[5] = robo->macaddr[0];
-
- if (robo->devid == DEVID5325) {
- /* Init the entry 1 of the bin */
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E1, \
- arl_entry1, sizeof(arl_entry1));
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VID_E1, \
- arl_entry1, 1);
-
- /* Init the entry 0 of the bin */
- arl_entry[6] = 0x8; /* Port Id: MII */
- arl_entry[7] = 0xc0; /* Static Entry, Valid */
-
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E0, \
- arl_entry, sizeof(arl_entry));
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
- arl_entry, ETHER_ADDR_LEN);
-
- /* VLAN Control 4 Register (Page 0x34, Address 4) */
- val8 = (1 << 6); /* drop frame with VID violation */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL4, &val8, sizeof(val8));
-
- /* VLAN Control 5 Register (Page 0x34, Address 5) */
- val8 = (1 << 3); /* drop frame when miss V table */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_CTRL5, &val8, sizeof(val8));
-
- pdesc = pdesc25;
- pdescsz = sizeof(pdesc25) / sizeof(pdesc_t);
- } else {
- /* Initialize the MAC Addr Index Register */
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_MINDX, \
- arl_entry, ETHER_ADDR_LEN);
-
- pdesc = pdesc97;
- pdescsz = sizeof(pdesc97) / sizeof(pdesc_t);
- }
-
- /* setup each vlan. max. 16 vlans. */
- /* force vlan id to be equal to vlan number */
- for (vid = 0; vid < VLAN_NUMVLANS; vid ++) {
-
- /* Add static ARL entries */
- if (robo->devid == DEVID5325) {
- val8 = vid;
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VID_E0, \
- &val8, sizeof(val8));
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VINDX, \
- &val8, sizeof(val8));
-
- /* Write the entry */
- val8 = 0x80;
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
- &val8, sizeof(val8));
- /* Wait for write to complete */
- SPINWAIT((robo->ops->read_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
- &val8, sizeof(val8)), ((val8 & 0x80) != 0)),
- 100 /* usec */);
- } else {
- /* Set the VLAN Id in VLAN ID Index Register */
- val8 = vid;
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_VINDX, \
- &val8, sizeof(val8));
-
- /* Set the MAC addr and VLAN Id in ARL Table MAC/VID Entry 0
- * Register.
- */
- arl_entry[6] = vid;
- arl_entry[7] = 0x0;
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_ARL_E0, \
- arl_entry, sizeof(arl_entry));
-
- /* Set the Static bit , Valid bit and Port ID fields in
- * ARL Table Data Entry 0 Register
- */
- val16 = 0xc008;
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_DAT_E0, \
- &val16, sizeof(val16));
-
- /* Clear the ARL_R/W bit and set the START/DONE bit in
- * the ARL Read/Write Control Register.
- */
- val8 = 0x80;
- robo->ops->write_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
- &val8, sizeof(val8));
- /* Wait for write to complete */
- SPINWAIT((robo->ops->read_reg(robo, PAGE_VTBL, REG_VTBL_CTRL, \
- &val8, sizeof(val8)), ((val8 & 0x80) != 0)),
- 100 /* usec */);
- }
- }
- }
-
- ROBO_END(driver);
- return 0;
-}
-
-static int handle_vlan_port_read(void *driver, char *buf, int nr)
-{
- /* FIXME: yeah, some work is missing here */
- return sprintf(buf, "bcmrobo.c: handle_vlan_port_read unimplimented\n");
-}
-
-static int handle_vlan_port_write(void *driver, char *buf, int nr)
-{
-
- switch_driver *d = (switch_driver *) driver;
- switch_vlan_config *c = switch_parse_vlan(d, buf);
-
- uint8 val8;
- uint16 val16;
- uint32 val32;
- int j;
- pdesc_t *pdesc;
- int pdescsz;
-
-/* printk(KERN_WARNING "bcmrobo.c: handle_vlan_port_write, nr %d\n", nr); */
-
- if (c == NULL)
- return -EINVAL;
-
- ROBO_START(driver);
-
- if (robo->devid == DEVID5325) {
- pdesc = pdesc25;
- pdescsz = sizeof(pdesc25) / sizeof(pdesc_t);
- } else {
- pdesc = pdesc97;
- pdescsz = sizeof(pdesc97) / sizeof(pdesc_t);
- }
-
-
- for (j = 0; j < d->ports; j++) {
- if ((c->untag | c->pvid) & (1 << j))
- if ((j != d->cpuport) || (c->untag & (1 << j))) {
-
- /* change default vlan tag */
-
-/* printk(KERN_WARNING "bcmrobo.c: set default vlan tag, port %d -> vlan %d\n", j, nr); */
-
- val16 = ((0 << 13) | /* priority - always 0 */
- nr); /* vlan id */
- robo->ops->write_reg(robo, PAGE_VLAN, pdesc[j].ptagr, &val16, sizeof(val16));
- }
- }
-
-
- if (robo->devid == DEVID5325) {
- val32 = ((c->untag << 6) | /* untag enable */
- c->port); /* vlan members */
- val32 |= ((1 << 20) | /* valid write */
- ((nr >> 4) << 12)); /* vlan id bit[11:4] */
- /* VLAN Write Register (Page 0x34, Address 0x08-0x0B) */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_WRITE, &val32,
- sizeof(val32));
- /* VLAN Table Access Register (Page 0x34, Address 0x06-0x07) */
- val16 = ((1 << 13) | /* start command */
- (1 << 12) | /* write state */
- nr); /* vlan id */
- robo->ops->write_reg(robo, PAGE_VLAN, REG_VLAN_ACCESS, &val16,
- sizeof(val16));
- } else {
- uint8 vtble, vtbli, vtbla;
- val32 = ((c->untag << 9) | /* untag enable */
- c->port); /* vlan members */
-
- if ((robo->devid == DEVID5395) || (robo->devid == DEVID53115)) {
- vtble = REG_VTBL_ENTRY_5395;
- vtbli = REG_VTBL_INDX_5395;
- vtbla = REG_VTBL_ACCESS_5395;
- } else {
- vtble = REG_VTBL_ENTRY;
- vtbli = REG_VTBL_INDX;
- vtbla = REG_VTBL_ACCESS;
- }
-
- /* VLAN Table Entry Register (Page 0x05, Address 0x63-0x66/0x83-0x86) */
- robo->ops->write_reg(robo, PAGE_VTBL, vtble, &val32,
- sizeof(val32));
- /* VLAN Table Address Index Reg (Page 0x05, Address 0x61-0x62/0x81-0x82) */
- val16 = nr; /* vlan id */
- robo->ops->write_reg(robo, PAGE_VTBL, vtbli, &val16,
- sizeof(val16));
-
- /* VLAN Table Access Register (Page 0x34, Address 0x60/0x80) */
- val8 = ((1 << 7) | /* start command */
- 0); /* write */
- robo->ops->write_reg(robo, PAGE_VTBL, vtbla, &val8,
- sizeof(val8));
- }
-
- ROBO_END(driver);
- return 0;
-}
-
-static int __init config_attach(robo_info_t *robo)
-{
- switch_config cfg[] = {
- {"enable", handle_enable_read, handle_enable_write},
- {"reset", NULL, handle_reset},
- {"enable_vlan", handle_enable_vlan_read, handle_enable_vlan_write},
- {NULL, NULL, NULL}
- };
- switch_config vlan[] = {
- {"ports", handle_vlan_port_read, handle_vlan_port_write},
- {NULL, NULL, NULL}
- };
- switch_driver driver = {
- name: DRIVER_NAME,
- version: DRIVER_VERSION,
- interface: robo->name,
- cpuport: 8,
- ports: 9,
- vlans: 16,
- driver_handlers: cfg,
- port_handlers: NULL,
- vlan_handlers: vlan,
- };
- if (robo->devid == DEVID5325) {
- driver.ports = 6;
- driver.cpuport = 5;
- }
- driver.priv = (void *) robo;
-
- return switch_register_driver(&driver);
-}
-
-static void __exit config_detach(robo_info_t *robo)
-{
- switch_unregister_driver(DRIVER_NAME);
-}
-
-
+++ /dev/null
-/*
- * RoboSwitch setup functions
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _bcm_robo_h_
-#define _bcm_robo_h_
-#include <switch-core.h>
-
-#define DEVID5325 0x25 /* 5325 (Not really be we fake it) */
-
-/* Forward declaration */
-typedef struct robo_info_s robo_info_t;
-
-/* Device access/config oprands */
-typedef struct {
- /* low level routines */
- void (*enable_mgmtif)(robo_info_t *robo); /* enable mgmt i/f, optional */
- void (*disable_mgmtif)(robo_info_t *robo); /* disable mgmt i/f, optional */
- int (*write_reg)(robo_info_t *robo, uint8 page, uint8 reg, void *val, int len);
- int (*read_reg)(robo_info_t *robo, uint8 page, uint8 reg, void *val, int len);
- /* description */
- char *desc;
-} dev_ops_t;
-
-
-typedef uint16 (*miird_f)(void *h, int add, int off);
-typedef void (*miiwr_f)(void *h, int add, int off, uint16 val);
-
-/* Private state per RoboSwitch */
-struct robo_info_s {
- sb_t *sbh; /* SiliconBackplane handle */
- char *vars; /* nvram variables handle */
- void *h; /* dev handle */
- uint16 devid; /* Device id for the switch */
- char *name; /* Linux device name */
- char macaddr[6];
-
- dev_ops_t *ops; /* device ops */
- uint8 page; /* current page */
-
- /* SPI */
- uint32 ss, sck, mosi, miso; /* GPIO mapping */
-
- /* MII */
- miird_f miird;
- miiwr_f miiwr;
-};
-
-extern robo_info_t *bcm_robo_attach(sb_t *sbh, void *h, char *name, char *vars, miird_f miird, miiwr_f miiwr);
-extern void bcm_robo_detach(robo_info_t *robo);
-extern int bcm_robo_enable_device(robo_info_t *robo);
-extern int bcm_robo_config_vlan(robo_info_t *robo, uint8 *mac_addr);
-extern int bcm_robo_enable_switch(robo_info_t *robo);
-extern void bcm_robo_set_macaddr(robo_info_t *robo, char *macaddr);
-
-#ifdef BCMDBG
-extern void robo_dump_regs(robo_info_t *robo, struct bcmstrbuf *b);
-#endif /* BCMDBG */
-
-#endif /* _bcm_robo_h_ */
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* History: */
-/* 02/25/00 Hav Khauv Initial version. */
-/******************************************************************************/
-
-#ifndef BITS_H
-#define BITS_H
-
-
-
-/******************************************************************************/
-/* Bit Mask definitions */
-/******************************************************************************/
-
-#define BIT_NONE 0x00
-#define BIT_0 0x01
-#define BIT_1 0x02
-#define BIT_2 0x04
-#define BIT_3 0x08
-#define BIT_4 0x10
-#define BIT_5 0x20
-#define BIT_6 0x40
-#define BIT_7 0x80
-#define BIT_8 0x0100
-#define BIT_9 0x0200
-#define BIT_10 0x0400
-#define BIT_11 0x0800
-#define BIT_12 0x1000
-#define BIT_13 0x2000
-#define BIT_14 0x4000
-#define BIT_15 0x8000
-#define BIT_16 0x010000
-#define BIT_17 0x020000
-#define BIT_18 0x040000
-#define BIT_19 0x080000
-#define BIT_20 0x100000
-#define BIT_21 0x200000
-#define BIT_22 0x400000
-#define BIT_23 0x800000
-#define BIT_24 0x01000000
-#define BIT_25 0x02000000
-#define BIT_26 0x04000000
-#define BIT_27 0x08000000
-#define BIT_28 0x10000000
-#define BIT_29 0x20000000
-#define BIT_30 0x40000000
-#define BIT_31 0x80000000
-
-
-
-#endif /* BITS_H */
-
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* (c) COPYRIGHT 2001-2004 Broadcom Corporation, ALL RIGHTS RESERVED. */
-/* */
-/* Name: F W _ L S O 0 5. H */
-/* Author : Kevin Tran */
-/* Version: 1.2 */
-/* */
-/* Module Description: This file contains firmware binary code of TCP */
-/* Segmentation firmware (BCM5705). */
-/* */
-/* History: */
-/* 08/10/02 Kevin Tran Incarnation. */
-/* 02/02/04 Kevin Tran Added Support for BCM5788. */
-/******************************************************************************/
-
-#ifndef __FW_LSO05_H__
-#define __FW_LSO05_H__
-
-int t3StkOffLd05FwReleaseMajor = 0x1;
-int t3StkOffLd05FwReleaseMinor = 0x2;
-int t3StkOffLd05FwReleaseFix = 0x0;
-U32 t3StkOffLd05FwStartAddr = 0x00010000;
-U32 t3StkOffLd05FwTextAddr = 0x00010000;
-int t3StkOffLd05FwTextLen = 0xe90;
-U32 t3StkOffLd05FwRodataAddr = 0x00010e90;
-int t3StkOffLd05FwRodataLen = 0x50;
-U32 t3StkOffLd05FwDataAddr = 0x00010f00;
-int t3StkOffLd05FwDataLen = 0x20;
-U32 t3StkOffLd05FwSbssAddr = 0x00010f20;
-int t3StkOffLd05FwSbssLen = 0x28;
-U32 t3StkOffLd05FwBssAddr = 0x00010f50;
-int t3StkOffLd05FwBssLen = 0x88;
-U32 t3StkOffLd05FwText[(0xe90/4) + 1] = {
-0xc004003, 0x0, 0x10f04,
-0x0, 0x10000003, 0x0, 0xd,
-0xd, 0x3c1d0001, 0x37bde000, 0x3a0f021,
-0x3c100001, 0x26100000, 0xc004010, 0x0,
-0xd, 0x27bdffe0, 0x3c04fefe, 0xafbf0018,
-0xc0042e8, 0x34840002, 0xc004364, 0x0,
-0x3c030001, 0x90630f34, 0x24020002, 0x3c040001,
-0x24840e9c, 0x14620003, 0x24050001, 0x3c040001,
-0x24840e90, 0x24060002, 0x3821, 0xafa00010,
-0xc004378, 0xafa00014, 0xc00402c, 0x0,
-0x8fbf0018, 0x3e00008, 0x27bd0020, 0x0,
-0x0, 0x27bdffe0, 0xafbf001c, 0xafb20018,
-0xafb10014, 0xc0042d4, 0xafb00010, 0x3c128000,
-0x24110001, 0x8f706810, 0x32020400, 0x10400007,
-0x0, 0x8f641008, 0x921024, 0x14400003,
-0x0, 0xc004064, 0x0, 0x3c020001,
-0x90420f56, 0x10510003, 0x32020200, 0x1040fff1,
-0x0, 0xc0041b4, 0x0, 0x8004034,
-0x0, 0x8fbf001c, 0x8fb20018, 0x8fb10014,
-0x8fb00010, 0x3e00008, 0x27bd0020, 0x27bdffe0,
-0x3c040001, 0x24840eb0, 0x2821, 0x3021,
-0x3821, 0xafbf0018, 0xafa00010, 0xc004378,
-0xafa00014, 0xd021, 0x24020130, 0xaf625000,
-0x3c010001, 0xa4200f50, 0x3c010001, 0xa0200f57,
-0x8fbf0018, 0x3e00008, 0x27bd0020, 0x0,
-0x0, 0x3c030001, 0x24630f60, 0x90620000,
-0x27bdfff0, 0x14400003, 0x80c021, 0x8004073,
-0x4821, 0x3c022000, 0x3021024, 0x10400003,
-0x24090002, 0x8004073, 0xa0600000, 0x24090001,
-0x181040, 0x30431f80, 0x346f8008, 0x1520004b,
-0x25eb0028, 0x3c040001, 0x832021, 0x8c848010,
-0x3c050001, 0x24a50f7a, 0x41402, 0xa0a20000,
-0x3c010001, 0xa0240f7b, 0x3c020001, 0x431021,
-0x94428014, 0x3c010001, 0xa0220f7c, 0x3c0c0001,
-0x1836021, 0x8d8c8018, 0x304200ff, 0x24420008,
-0x220c3, 0x24020001, 0x3c010001, 0xa0220f60,
-0x124102b, 0x1040000c, 0x3821, 0x24a6000e,
-0x1602821, 0x8ca20000, 0x8ca30004, 0x24a50008,
-0x24e70001, 0xacc20000, 0xacc30004, 0xe4102b,
-0x1440fff8, 0x24c60008, 0x3821, 0x3c080001,
-0x25080f7b, 0x91060000, 0x3c020001, 0x90420f7c,
-0x2503000d, 0xc32821, 0x461023, 0x21fc2,
-0x431021, 0x21043, 0x1840000c, 0x2021,
-0x91020001, 0x461023, 0x21fc2, 0x431021,
-0x21843, 0x94a20000, 0x24e70001, 0x822021,
-0xe3102a, 0x1440fffb, 0x24a50002, 0x41c02,
-0x3082ffff, 0x622021, 0x41402, 0x822021,
-0x3c02ffff, 0x1821024, 0x3083ffff, 0x431025,
-0x3c010001, 0x80040fa, 0xac220f80, 0x3c050001,
-0x24a50f7c, 0x90a20000, 0x3c0c0001, 0x1836021,
-0x8d8c8018, 0x220c2, 0x1080000e, 0x3821,
-0x1603021, 0x24a5000c, 0x8ca20000, 0x8ca30004,
-0x24a50008, 0x24e70001, 0xacc20000, 0xacc30004,
-0xe4102b, 0x1440fff8, 0x24c60008, 0x3c050001,
-0x24a50f7c, 0x90a20000, 0x30430007, 0x24020004,
-0x10620011, 0x28620005, 0x10400005, 0x24020002,
-0x10620008, 0x710c0, 0x80040fa, 0x0,
-0x24020006, 0x1062000e, 0x710c0, 0x80040fa,
-0x0, 0xa21821, 0x9463000c, 0x4b1021,
-0x80040fa, 0xa4430000, 0x710c0, 0xa21821,
-0x8c63000c, 0x4b1021, 0x80040fa, 0xac430000,
-0xa21821, 0x8c63000c, 0x4b2021, 0xa21021,
-0xac830000, 0x94420010, 0xa4820004, 0x95e70006,
-0x3c020001, 0x90420f7c, 0x3c030001, 0x90630f7a,
-0xe2c823, 0x3c020001, 0x90420f7b, 0x24630028,
-0x1e34021, 0x24420028, 0x15200012, 0x1e23021,
-0x94c2000c, 0x3c010001, 0xa4220f78, 0x94c20004,
-0x94c30006, 0x3c010001, 0xa4200f76, 0x3c010001,
-0xa4200f72, 0x21400, 0x431025, 0x3c010001,
-0xac220f6c, 0x95020004, 0x3c010001, 0x8004124,
-0xa4220f70, 0x3c020001, 0x94420f70, 0x3c030001,
-0x94630f72, 0x431021, 0xa5020004, 0x3c020001,
-0x94420f6c, 0xa4c20004, 0x3c020001, 0x8c420f6c,
-0xa4c20006, 0x3c040001, 0x94840f72, 0x3c020001,
-0x94420f70, 0x3c0a0001, 0x954a0f76, 0x441821,
-0x3063ffff, 0x62182a, 0x24020002, 0x1122000b,
-0x832023, 0x3c030001, 0x94630f78, 0x30620009,
-0x10400006, 0x3062fff6, 0xa4c2000c, 0x3c020001,
-0x94420f78, 0x30420009, 0x1425023, 0x24020001,
-0x1122001b, 0x29220002, 0x50400005, 0x24020002,
-0x11200007, 0x31a2ffff, 0x8004197, 0x0,
-0x1122001d, 0x24020016, 0x8004197, 0x31a2ffff,
-0x3c0e0001, 0x95ce0f80, 0x10800005, 0x1806821,
-0x1c42021, 0x41c02, 0x3082ffff, 0x627021,
-0xe1027, 0xa502000a, 0x3c030001, 0x90630f7b,
-0x31a2ffff, 0xe21021, 0x800418d, 0x432023,
-0x3c020001, 0x94420f80, 0x442021, 0x41c02,
-0x3082ffff, 0x622021, 0x807021, 0x41027,
-0x8004185, 0xa502000a, 0x3c050001, 0x24a50f7a,
-0x90a30000, 0x14620002, 0x24e2fff2, 0xa5e20034,
-0x90a20000, 0xe21023, 0xa5020002, 0x3c030001,
-0x94630f80, 0x3c020001, 0x94420f5a, 0x30e5ffff,
-0x641821, 0x451023, 0x622023, 0x41c02,
-0x3082ffff, 0x622021, 0x41027, 0xa502000a,
-0x3c030001, 0x90630f7c, 0x24620001, 0x14a20005,
-0x807021, 0x1631021, 0x90420000, 0x8004185,
-0x26200, 0x24620002, 0x14a20003, 0x306200fe,
-0x4b1021, 0x944c0000, 0x3c020001, 0x94420f82,
-0x3183ffff, 0x3c040001, 0x90840f7b, 0x431021,
-0xe21021, 0x442023, 0x8a2021, 0x41c02,
-0x3082ffff, 0x622021, 0x41402, 0x822021,
-0x806821, 0x41027, 0xa4c20010, 0x31a2ffff,
-0xe1c00, 0x431025, 0x3c040001, 0x24840f72,
-0xade20010, 0x94820000, 0x3c050001, 0x94a50f76,
-0x3c030001, 0x8c630f6c, 0x24420001, 0xb92821,
-0xa4820000, 0x3322ffff, 0x622021, 0x83182b,
-0x3c010001, 0xa4250f76, 0x10600003, 0x24a2ffff,
-0x3c010001, 0xa4220f76, 0x3c024000, 0x3021025,
-0x3c010001, 0xac240f6c, 0xaf621008, 0x3e00008,
-0x27bd0010, 0x3c030001, 0x90630f56, 0x27bdffe8,
-0x24020001, 0xafbf0014, 0x10620026, 0xafb00010,
-0x8f620cf4, 0x2442ffff, 0x3042007f, 0x21100,
-0x8c434000, 0x3c010001, 0xac230f64, 0x8c434008,
-0x24444000, 0x8c5c4004, 0x30620040, 0x14400002,
-0x24020088, 0x24020008, 0x3c010001, 0xa4220f68,
-0x30620004, 0x10400005, 0x24020001, 0x3c010001,
-0xa0220f57, 0x80041d5, 0x31402, 0x3c010001,
-0xa0200f57, 0x31402, 0x3c010001, 0xa4220f54,
-0x9483000c, 0x24020001, 0x3c010001, 0xa4200f50,
-0x3c010001, 0xa0220f56, 0x3c010001, 0xa4230f62,
-0x24020001, 0x1342001e, 0x0, 0x13400005,
-0x24020003, 0x13420067, 0x0, 0x80042cf,
-0x0, 0x3c020001, 0x94420f62, 0x241a0001,
-0x3c010001, 0xa4200f5e, 0x3c010001, 0xa4200f52,
-0x304407ff, 0x21bc2, 0x31823, 0x3063003e,
-0x34630036, 0x21242, 0x3042003c, 0x621821,
-0x3c010001, 0xa4240f58, 0x832021, 0x24630030,
-0x3c010001, 0xa4240f5a, 0x3c010001, 0xa4230f5c,
-0x3c060001, 0x24c60f52, 0x94c50000, 0x94c30002,
-0x3c040001, 0x94840f5a, 0x651021, 0x44102a,
-0x10400013, 0x3c108000, 0xa31021, 0xa4c20000,
-0x3c02a000, 0xaf620cf4, 0x3c010001, 0xa0200f56,
-0x8f641008, 0x901024, 0x14400003, 0x0,
-0xc004064, 0x0, 0x8f620cf4, 0x501024,
-0x104000b7, 0x0, 0x800420f, 0x0,
-0x3c030001, 0x94630f50, 0x851023, 0xa4c40000,
-0x621821, 0x3042ffff, 0x3c010001, 0xa4230f50,
-0xaf620ce8, 0x3c020001, 0x94420f68, 0x34420024,
-0xaf620cec, 0x94c30002, 0x3c020001, 0x94420f50,
-0x14620012, 0x3c028000, 0x3c108000, 0x3c02a000,
-0xaf620cf4, 0x3c010001, 0xa0200f56, 0x8f641008,
-0x901024, 0x14400003, 0x0, 0xc004064,
-0x0, 0x8f620cf4, 0x501024, 0x1440fff7,
-0x0, 0x80042cf, 0x241a0003, 0xaf620cf4,
-0x3c108000, 0x8f641008, 0x901024, 0x14400003,
-0x0, 0xc004064, 0x0, 0x8f620cf4,
-0x501024, 0x1440fff7, 0x0, 0x80042cf,
-0x241a0003, 0x3c070001, 0x24e70f50, 0x94e20000,
-0x3821021, 0xaf620ce0, 0x3c020001, 0x8c420f64,
-0xaf620ce4, 0x3c050001, 0x94a50f54, 0x94e30000,
-0x3c040001, 0x94840f58, 0x3c020001, 0x94420f5e,
-0xa32823, 0x822023, 0x30a6ffff, 0x3083ffff,
-0xc3102b, 0x14400043, 0x0, 0x3c020001,
-0x94420f5c, 0x21400, 0x621025, 0xaf620ce8,
-0x94e20000, 0x3c030001, 0x94630f54, 0x441021,
-0xa4e20000, 0x3042ffff, 0x14430021, 0x3c020008,
-0x3c020001, 0x90420f57, 0x10400006, 0x3c03000c,
-0x3c020001, 0x94420f68, 0x34630624, 0x800427c,
-0xd021, 0x3c020001, 0x94420f68, 0x3c030008,
-0x34630624, 0x431025, 0xaf620cec, 0x3c108000,
-0x3c02a000, 0xaf620cf4, 0x3c010001, 0xa0200f56,
-0x8f641008, 0x901024, 0x14400003, 0x0,
-0xc004064, 0x0, 0x8f620cf4, 0x501024,
-0x10400015, 0x0, 0x8004283, 0x0,
-0x3c030001, 0x94630f68, 0x34420624, 0x3c108000,
-0x621825, 0x3c028000, 0xaf630cec, 0xaf620cf4,
-0x8f641008, 0x901024, 0x14400003, 0x0,
-0xc004064, 0x0, 0x8f620cf4, 0x501024,
-0x1440fff7, 0x0, 0x3c010001, 0x80042cf,
-0xa4200f5e, 0x3c020001, 0x94420f5c, 0x21400,
-0xc21025, 0xaf620ce8, 0x3c020001, 0x90420f57,
-0x10400009, 0x3c03000c, 0x3c020001, 0x94420f68,
-0x34630624, 0xd021, 0x431025, 0xaf620cec,
-0x80042c1, 0x3c108000, 0x3c020001, 0x94420f68,
-0x3c030008, 0x34630604, 0x431025, 0xaf620cec,
-0x3c020001, 0x94420f5e, 0x451021, 0x3c010001,
-0xa4220f5e, 0x3c108000, 0x3c02a000, 0xaf620cf4,
-0x3c010001, 0xa0200f56, 0x8f641008, 0x901024,
-0x14400003, 0x0, 0xc004064, 0x0,
-0x8f620cf4, 0x501024, 0x1440fff7, 0x0,
-0x8fbf0014, 0x8fb00010, 0x3e00008, 0x27bd0018,
-0x0, 0x27bdffe0, 0x3c040001, 0x24840ec0,
-0x2821, 0x3021, 0x3821, 0xafbf0018,
-0xafa00010, 0xc004378, 0xafa00014, 0xd021,
-0x24020130, 0xaf625000, 0x3c010001, 0xa4200f50,
-0x3c010001, 0xa0200f57, 0x8fbf0018, 0x3e00008,
-0x27bd0020, 0x27bdffe8, 0x3c1bc000, 0xafbf0014,
-0xafb00010, 0xaf60680c, 0x8f626804, 0x34420082,
-0xaf626804, 0x8f634000, 0x24020b50, 0x3c010001,
-0xac220f20, 0x24020b78, 0x3c010001, 0xac220f30,
-0x34630002, 0xaf634000, 0xc004315, 0x808021,
-0x3c010001, 0xa0220f34, 0x304200ff, 0x24030002,
-0x14430005, 0x0, 0x3c020001, 0x8c420f20,
-0x8004308, 0xac5000c0, 0x3c020001, 0x8c420f20,
-0xac5000bc, 0x8f624434, 0x8f634438, 0x8f644410,
-0x3c010001, 0xac220f28, 0x3c010001, 0xac230f38,
-0x3c010001, 0xac240f24, 0x8fbf0014, 0x8fb00010,
-0x3e00008, 0x27bd0018, 0x3e00008, 0x24020001,
-0x27bdfff8, 0x18800009, 0x2821, 0x8f63680c,
-0x8f62680c, 0x1043fffe, 0x0, 0x24a50001,
-0xa4102a, 0x1440fff9, 0x0, 0x3e00008,
-0x27bd0008, 0x8f634450, 0x3c020001, 0x8c420f28,
-0x31c02, 0x43102b, 0x14400008, 0x3c038000,
-0x3c040001, 0x8c840f38, 0x8f624450, 0x21c02,
-0x83102b, 0x1040fffc, 0x3c038000, 0xaf634444,
-0x8f624444, 0x431024, 0x1440fffd, 0x0,
-0x8f624448, 0x3e00008, 0x3042ffff, 0x3082ffff,
-0x2442e000, 0x2c422001, 0x14400003, 0x3c024000,
-0x8004347, 0x2402ffff, 0x822025, 0xaf645c38,
-0x8f625c30, 0x30420002, 0x1440fffc, 0x1021,
-0x3e00008, 0x0, 0x8f624450, 0x3c030001,
-0x8c630f24, 0x8004350, 0x3042ffff, 0x8f624450,
-0x3042ffff, 0x43102b, 0x1440fffc, 0x0,
-0x3e00008, 0x0, 0x27bdffe0, 0x802821,
-0x3c040001, 0x24840ed0, 0x3021, 0x3821,
-0xafbf0018, 0xafa00010, 0xc004378, 0xafa00014,
-0x800435f, 0x0, 0x8fbf0018, 0x3e00008,
-0x27bd0020, 0x3c020001, 0x3442d600, 0x3c030001,
-0x3463d600, 0x3c040001, 0x3484ddff, 0x3c010001,
-0xac220f40, 0x24020040, 0x3c010001, 0xac220f44,
-0x3c010001, 0xac200f3c, 0xac600000, 0x24630004,
-0x83102b, 0x5040fffd, 0xac600000, 0x3e00008,
-0x0, 0x804821, 0x8faa0010, 0x3c020001,
-0x8c420f3c, 0x3c040001, 0x8c840f44, 0x8fab0014,
-0x24430001, 0x44102b, 0x3c010001, 0xac230f3c,
-0x14400003, 0x4021, 0x3c010001, 0xac200f3c,
-0x3c020001, 0x8c420f3c, 0x3c030001, 0x8c630f40,
-0x91240000, 0x21140, 0x431021, 0x481021,
-0x25080001, 0xa0440000, 0x29020008, 0x1440fff4,
-0x25290001, 0x3c020001, 0x8c420f3c, 0x3c030001,
-0x8c630f40, 0x8f64680c, 0x21140, 0x431021,
-0xac440008, 0xac45000c, 0xac460010, 0xac470014,
-0xac4a0018, 0x3e00008, 0xac4b001c, 0x0,
-0x0, 0x0 };
-U32 t3StkOffLd05FwRodata[(0x50/4) + 1] = {
-0x4d61696e,
-0x43707542, 0x0, 0x4d61696e, 0x43707541,
-0x0, 0x0, 0x0, 0x73746b6f,
-0x66666c64, 0x0, 0x0, 0x73746b6f,
-0x66666c64, 0x0, 0x0, 0x66617461,
-0x6c457272, 0x0, 0x0, 0x0 };
-U32 t3StkOffLd05FwData[(0x20/4) + 1] = {
-0x0,
-0x73746b6f, 0x66666c64, 0x5f76312e, 0x322e3000,
-0x0, 0x0, 0x0, 0x0 };
-
-#endif /* __FW_LSO05_H__ */
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* (c) COPYRIGHT 2000-2003 Broadcom Corporation, ALL RIGHTS RESERVED. */
-/* */
-/* Name: F W _ S T K O F F L D . H */
-/* Author : Kevin Tran */
-/* Version : 1.6 */
-/* */
-/* Module Description: This file contains firmware binary code of for TCP/IP */
-/* stack offload support. Currently, this firmware supports the following */
-/* features: */
-/* 1. TCP segmentation (aka Large Send Offload -- LSO) */
-/* 2. UDP Checksum offload support for IP fragmented UDP frames. */
-/* */
-/* History: */
-/* 07/17/01 Kevin Tran Incarnation. */
-/* 10/10/01 Kevin Tran Added UDP checksum offload support. */
-/* 10/20/01 Kevin Tran Fixed a problem where pseudo checksum is not */
-/* calculated correctly in case of IP */
-/* fragmentation case. */
-/* 10/30/01 Kevin Tran Fixed a problem where checksum is incorrectly */
-/* computed if bit BD_FLAG_TCP_UDP_CKSUM is set */
-/* in Send BDs. */
-/* 05/30/02 Kevin Tran Fixed a problem where UDP checksum is */
-/* incorrectly computed if the length of data is */
-/* less than 6 bytes in the last packetst of */
-/* of a chain of fragmented IP/UDP packets. */
-/* 12/01/02 Kevin Tran Fixed a problem where firmware might lockup */
-/* in a certain test scenario with BCM5704. */
-/* 12/10/02 Kevin Tran Fixed a problem where IP checksum might be */
-/* incorrectly calculated in some corner cases. */
-/* This problem should ONLY happen with BCM5702/ */
-/* BCM5703/BCM5704 ASICs. */
-/* 06/20/03 Kevin Tran Optimized performance so that pre-DMA code */
-/* doesn't have to wait until the first packet */
-/* is completely DMAed before it can setup DMAs */
-/* for subsequent packets. This requires host */
-/* driver to pass IP/TCP option lengths if any */
-/* to F/W via bit 15..12 of Send BD flag. */
-/* 08/12/03 Kevin Tran Fixed a problem where UDP checksum doesn't */
-/* work when the host driver seeds pseudo */
-/* checksum. */
-/* 12/24/03 Kevin Tran Fixed a problem where VLAN tag is not */
-/* inserted correctly in LSO mode. */
-/* 01/16/04 Kevin Tran Fixed a problem where Ethernet Type is not */
-/* set to 0x8870 when the outgoing LSO packet is */
-/* jumbo frame with SNAP encapsulation. */
-/******************************************************************************/
-
-#ifndef __FW_STKOFFLD_H__
-#define __FW_STKOFFLD_H__
-
-typedef LM_UINT32 U32;
-
-int t3StkOffLdFwReleaseMajor = 0x1;
-int t3StkOffLdFwReleaseMinor = 0x6;
-int t3StkOffLdFwReleaseFix = 0x0;
-U32 t3StkOffLdFwStartAddr = 0x08000000;
-U32 t3StkOffLdFwTextAddr = 0x08000000;
-int t3StkOffLdFwTextLen = 0x1aa0;
-U32 t3StkOffLdFwRodataAddr = 0x08001aa0;
-int t3StkOffLdFwRodataLen = 0x60;
-U32 t3StkOffLdFwDataAddr = 0x08001b20;
-int t3StkOffLdFwDataLen = 0x30;
-U32 t3StkOffLdFwSbssAddr = 0x08001b50;
-int t3StkOffLdFwSbssLen = 0x2c;
-U32 t3StkOffLdFwBssAddr = 0x08001b80;
-int t3StkOffLdFwBssLen = 0x894;
-U32 t3StkOffLdFwText[(0x1aa0/4) + 1] = {
-0xe000003, 0x0, 0x8001b24,
-0x0, 0x10000003, 0x0, 0xd,
-0xd, 0x3c1d0800, 0x37bd4000, 0x3a0f021,
-0x3c100800, 0x26100000, 0xe000010, 0x0,
-0xd, 0x27bdffe0, 0x3c04fefe, 0xafbf0018,
-0xe0005d8, 0x34840002, 0xe000668, 0x0,
-0x3c030800, 0x90631b68, 0x24020002, 0x3c040800,
-0x24841aac, 0x14620003, 0x24050001, 0x3c040800,
-0x24841aa0, 0x24060006, 0x3821, 0xafa00010,
-0xe00067c, 0xafa00014, 0x8f625c50, 0x34420001,
-0xaf625c50, 0x8f625c90, 0x34420001, 0xaf625c90,
-0x2402ffff, 0xe000034, 0xaf625404, 0x8fbf0018,
-0x3e00008, 0x27bd0020, 0x0, 0x0,
-0x0, 0x27bdffe0, 0xafbf001c, 0xafb20018,
-0xafb10014, 0xe00005b, 0xafb00010, 0x24120002,
-0x24110001, 0x8f706820, 0x32020100, 0x10400003,
-0x0, 0xe0000bb, 0x0, 0x8f706820,
-0x32022000, 0x10400004, 0x32020001, 0xe0001f0,
-0x24040001, 0x32020001, 0x10400003, 0x0,
-0xe0000a3, 0x0, 0x3c020800, 0x90421b98,
-0x14520003, 0x0, 0xe0004c0, 0x0,
-0xa00003c, 0xaf715028, 0x8fbf001c, 0x8fb20018,
-0x8fb10014, 0x8fb00010, 0x3e00008, 0x27bd0020,
-0x27bdffe0, 0x3c040800, 0x24841ac0, 0x2821,
-0x3021, 0x3821, 0xafbf0018, 0xafa00010,
-0xe00067c, 0xafa00014, 0x3c040800, 0x248423d8,
-0xa4800000, 0x3c010800, 0xa0201b98, 0x3c010800,
-0xac201b9c, 0x3c010800, 0xac201ba0, 0x3c010800,
-0xac201ba4, 0x3c010800, 0xac201bac, 0x3c010800,
-0xac201bb8, 0x3c010800, 0xac201bbc, 0x8f624434,
-0x3c010800, 0xac221b88, 0x8f624438, 0x3c010800,
-0xac221b8c, 0x8f624410, 0xac80f7a8, 0x3c010800,
-0xac201b84, 0x3c010800, 0xac2023e0, 0x3c010800,
-0xac2023c8, 0x3c010800, 0xac2023cc, 0x3c010800,
-0xac202400, 0x3c010800, 0xac221b90, 0x8f620068,
-0x24030007, 0x21702, 0x10430005, 0x0,
-0x8f620068, 0x21702, 0x14400004, 0x24020001,
-0x3c010800, 0xa000097, 0xac20240c, 0xac820034,
-0x3c040800, 0x24841acc, 0x3c050800, 0x8ca5240c,
-0x3021, 0x3821, 0xafa00010, 0xe00067c,
-0xafa00014, 0x8fbf0018, 0x3e00008, 0x27bd0020,
-0x27bdffe0, 0x3c040800, 0x24841ad8, 0x2821,
-0x3021, 0x3821, 0xafbf0018, 0xafa00010,
-0xe00067c, 0xafa00014, 0xe00005b, 0x0,
-0xe0000b4, 0x2021, 0x8fbf0018, 0x3e00008,
-0x27bd0020, 0x24020001, 0x8f636820, 0x821004,
-0x21027, 0x621824, 0x3e00008, 0xaf636820,
-0x27bdffd0, 0xafbf002c, 0xafb60028, 0xafb50024,
-0xafb40020, 0xafb3001c, 0xafb20018, 0xafb10014,
-0xafb00010, 0x8f675c5c, 0x3c030800, 0x24631bbc,
-0x8c620000, 0x14470005, 0x3c0200ff, 0x3c020800,
-0x90421b98, 0x14400119, 0x3c0200ff, 0x3442fff8,
-0xe28824, 0xac670000, 0x111902, 0x306300ff,
-0x30e20003, 0x211c0, 0x622825, 0xa04021,
-0x71602, 0x3c030800, 0x90631b98, 0x3044000f,
-0x14600036, 0x804821, 0x24020001, 0x3c010800,
-0xa0221b98, 0x51100, 0x821025, 0x3c010800,
-0xac201b9c, 0x3c010800, 0xac201ba0, 0x3c010800,
-0xac201ba4, 0x3c010800, 0xac201bac, 0x3c010800,
-0xac201bb8, 0x3c010800, 0xac201bb0, 0x3c010800,
-0xac201bb4, 0x3c010800, 0xa42223d8, 0x9622000c,
-0x30437fff, 0x3c010800, 0xa4222410, 0x30428000,
-0x3c010800, 0xa4231bc6, 0x10400005, 0x24020001,
-0x3c010800, 0xac2223f4, 0xa000102, 0x2406003e,
-0x24060036, 0x3c010800, 0xac2023f4, 0x9622000a,
-0x3c030800, 0x94631bc6, 0x3c010800, 0xac2023f0,
-0x3c010800, 0xac2023f8, 0x21302, 0x21080,
-0xc21021, 0x621821, 0x3c010800, 0xa42223d0,
-0x3c010800, 0xa000115, 0xa4231b96, 0x9622000c,
-0x3c010800, 0xa42223ec, 0x3c040800, 0x24841b9c,
-0x8c820000, 0x21100, 0x3c010800, 0x220821,
-0xac311bc8, 0x8c820000, 0x21100, 0x3c010800,
-0x220821, 0xac271bcc, 0x8c820000, 0x25030001,
-0x306601ff, 0x21100, 0x3c010800, 0x220821,
-0xac261bd0, 0x8c820000, 0x21100, 0x3c010800,
-0x220821, 0xac291bd4, 0x96230008, 0x3c020800,
-0x8c421bac, 0x432821, 0x3c010800, 0xac251bac,
-0x9622000a, 0x30420004, 0x14400018, 0x61100,
-0x8f630c14, 0x3063000f, 0x2c620002, 0x1440000b,
-0x3c02c000, 0x8f630c14, 0x3c020800, 0x8c421b40,
-0x3063000f, 0x24420001, 0x3c010800, 0xac221b40,
-0x2c620002, 0x1040fff7, 0x3c02c000, 0xe21825,
-0xaf635c5c, 0x8f625c50, 0x30420002, 0x10400014,
-0x0, 0xa000147, 0x0, 0x3c030800,
-0x8c631b80, 0x3c040800, 0x94841b94, 0x1221025,
-0x3c010800, 0xa42223da, 0x24020001, 0x3c010800,
-0xac221bb8, 0x24630001, 0x85202a, 0x3c010800,
-0x10800003, 0xac231b80, 0x3c010800, 0xa4251b94,
-0x3c060800, 0x24c61b9c, 0x8cc20000, 0x24420001,
-0xacc20000, 0x28420080, 0x14400005, 0x0,
-0xe000656, 0x24040002, 0xa0001e6, 0x0,
-0x3c020800, 0x8c421bb8, 0x10400078, 0x24020001,
-0x3c050800, 0x90a51b98, 0x14a20072, 0x0,
-0x3c150800, 0x96b51b96, 0x3c040800, 0x8c841bac,
-0x32a3ffff, 0x83102a, 0x1440006c, 0x0,
-0x14830003, 0x0, 0x3c010800, 0xac2523f0,
-0x1060005c, 0x9021, 0x24d60004, 0x60a021,
-0x24d30014, 0x8ec20000, 0x28100, 0x3c110800,
-0x2308821, 0xe000625, 0x8e311bc8, 0x402821,
-0x10a00054, 0x0, 0x9628000a, 0x31020040,
-0x10400005, 0x2407180c, 0x8e22000c, 0x2407188c,
-0x21400, 0xaca20018, 0x3c030800, 0x701821,
-0x8c631bd0, 0x3c020800, 0x501021, 0x8c421bd4,
-0x31d00, 0x21400, 0x621825, 0xaca30014,
-0x8ec30004, 0x96220008, 0x432023, 0x3242ffff,
-0x3083ffff, 0x431021, 0x282102a, 0x14400002,
-0x2b23023, 0x803021, 0x8e620000, 0x30c4ffff,
-0x441021, 0xae620000, 0x8e220000, 0xaca20000,
-0x8e220004, 0x8e63fff4, 0x431021, 0xaca20004,
-0xa4a6000e, 0x8e62fff4, 0x441021, 0xae62fff4,
-0x96230008, 0x43102a, 0x14400005, 0x2469021,
-0x8e62fff0, 0xae60fff4, 0x24420001, 0xae62fff0,
-0xaca00008, 0x3242ffff, 0x14540008, 0x24020305,
-0x31020080, 0x54400001, 0x34e70010, 0x24020905,
-0xa4a2000c, 0xa0001cb, 0x34e70020, 0xa4a2000c,
-0x3c020800, 0x8c4223f0, 0x10400003, 0x3c024b65,
-0xa0001d3, 0x34427654, 0x3c02b49a, 0x344289ab,
-0xaca2001c, 0x30e2ffff, 0xaca20010, 0xe0005a2,
-0xa02021, 0x3242ffff, 0x54102b, 0x1440ffa9,
-0x0, 0x24020002, 0x3c010800, 0xa0001e6,
-0xa0221b98, 0x8ec2083c, 0x24420001, 0xa0001e6,
-0xaec2083c, 0xe0004c0, 0x0, 0x8fbf002c,
-0x8fb60028, 0x8fb50024, 0x8fb40020, 0x8fb3001c,
-0x8fb20018, 0x8fb10014, 0x8fb00010, 0x3e00008,
-0x27bd0030, 0x27bdffd0, 0xafbf0028, 0xafb30024,
-0xafb20020, 0xafb1001c, 0xafb00018, 0x8f725c9c,
-0x3c0200ff, 0x3442fff8, 0x3c070800, 0x24e71bb4,
-0x2428824, 0x9623000e, 0x8ce20000, 0x431021,
-0xace20000, 0x8e220010, 0x30420020, 0x14400011,
-0x809821, 0xe00063b, 0x2202021, 0x3c02c000,
-0x2421825, 0xaf635c9c, 0x8f625c90, 0x30420002,
-0x1040011e, 0x0, 0xaf635c9c, 0x8f625c90,
-0x30420002, 0x10400119, 0x0, 0xa00020d,
-0x0, 0x8e240008, 0x8e230014, 0x41402,
-0x231c0, 0x31502, 0x304201ff, 0x2442ffff,
-0x3042007f, 0x31942, 0x30637800, 0x21100,
-0x24424000, 0x624821, 0x9522000a, 0x3084ffff,
-0x30420008, 0x104000b0, 0x429c0, 0x3c020800,
-0x8c422400, 0x14400024, 0x24c50008, 0x94c20014,
-0x3c010800, 0xa42223d0, 0x8cc40010, 0x41402,
-0x3c010800, 0xa42223d2, 0x3c010800, 0xa42423d4,
-0x94c2000e, 0x3083ffff, 0x431023, 0x3c010800,
-0xac222408, 0x94c2001a, 0x3c010800, 0xac262400,
-0x3c010800, 0xac322404, 0x3c010800, 0xac2223fc,
-0x3c02c000, 0x2421825, 0xaf635c9c, 0x8f625c90,
-0x30420002, 0x104000e5, 0x0, 0xaf635c9c,
-0x8f625c90, 0x30420002, 0x104000e0, 0x0,
-0xa000246, 0x0, 0x94c2000e, 0x3c030800,
-0x946323d4, 0x434023, 0x3103ffff, 0x2c620008,
-0x1040001c, 0x0, 0x94c20014, 0x24420028,
-0xa22821, 0x31042, 0x1840000b, 0x2021,
-0x24e60848, 0x403821, 0x94a30000, 0x8cc20000,
-0x24840001, 0x431021, 0xacc20000, 0x87102a,
-0x1440fff9, 0x24a50002, 0x31020001, 0x1040001f,
-0x3c024000, 0x3c040800, 0x248423fc, 0xa0a00001,
-0x94a30000, 0x8c820000, 0x431021, 0xa000285,
-0xac820000, 0x8f626800, 0x3c030010, 0x431024,
-0x10400009, 0x0, 0x94c2001a, 0x3c030800,
-0x8c6323fc, 0x431021, 0x3c010800, 0xac2223fc,
-0xa000286, 0x3c024000, 0x94c2001a, 0x94c4001c,
-0x3c030800, 0x8c6323fc, 0x441023, 0x621821,
-0x3c010800, 0xac2323fc, 0x3c024000, 0x2421825,
-0xaf635c9c, 0x8f625c90, 0x30420002, 0x1440fffc,
-0x0, 0x9522000a, 0x30420010, 0x1040009b,
-0x0, 0x3c030800, 0x946323d4, 0x3c070800,
-0x24e72400, 0x8ce40000, 0x8f626800, 0x24630030,
-0x832821, 0x3c030010, 0x431024, 0x1440000a,
-0x0, 0x94a20004, 0x3c040800, 0x8c842408,
-0x3c030800, 0x8c6323fc, 0x441023, 0x621821,
-0x3c010800, 0xac2323fc, 0x3c040800, 0x8c8423fc,
-0x41c02, 0x3082ffff, 0x622021, 0x41402,
-0x822021, 0x41027, 0xa4a20006, 0x3c030800,
-0x8c632404, 0x3c0200ff, 0x3442fff8, 0x628824,
-0x96220008, 0x24050001, 0x24034000, 0x231c0,
-0x801021, 0xa4c2001a, 0xa4c0001c, 0xace00000,
-0x3c010800, 0xac251b60, 0xaf635cb8, 0x8f625cb0,
-0x30420002, 0x10400003, 0x0, 0x3c010800,
-0xac201b60, 0x8e220008, 0xaf625cb8, 0x8f625cb0,
-0x30420002, 0x10400003, 0x0, 0x3c010800,
-0xac201b60, 0x3c020800, 0x8c421b60, 0x1040ffec,
-0x0, 0x3c040800, 0xe00063b, 0x8c842404,
-0xa00032a, 0x0, 0x3c030800, 0x90631b98,
-0x24020002, 0x14620003, 0x3c034b65, 0xa0002e1,
-0x8021, 0x8e22001c, 0x34637654, 0x10430002,
-0x24100002, 0x24100001, 0xc02021, 0xe000350,
-0x2003021, 0x24020003, 0x3c010800, 0xa0221b98,
-0x24020002, 0x1202000a, 0x24020001, 0x3c030800,
-0x8c6323f0, 0x10620006, 0x0, 0x3c020800,
-0x944223d8, 0x21400, 0xa00031f, 0xae220014,
-0x3c040800, 0x248423da, 0x94820000, 0x21400,
-0xae220014, 0x3c020800, 0x8c421bbc, 0x3c03c000,
-0x3c010800, 0xa0201b98, 0x431025, 0xaf625c5c,
-0x8f625c50, 0x30420002, 0x10400009, 0x0,
-0x2484f7e2, 0x8c820000, 0x431025, 0xaf625c5c,
-0x8f625c50, 0x30420002, 0x1440fffa, 0x0,
-0x3c020800, 0x24421b84, 0x8c430000, 0x24630001,
-0xac430000, 0x8f630c14, 0x3063000f, 0x2c620002,
-0x1440000c, 0x3c024000, 0x8f630c14, 0x3c020800,
-0x8c421b40, 0x3063000f, 0x24420001, 0x3c010800,
-0xac221b40, 0x2c620002, 0x1040fff7, 0x0,
-0x3c024000, 0x2421825, 0xaf635c9c, 0x8f625c90,
-0x30420002, 0x1440fffc, 0x0, 0x12600003,
-0x0, 0xe0004c0, 0x0, 0x8fbf0028,
-0x8fb30024, 0x8fb20020, 0x8fb1001c, 0x8fb00018,
-0x3e00008, 0x27bd0030, 0x8f634450, 0x3c040800,
-0x24841b88, 0x8c820000, 0x31c02, 0x43102b,
-0x14400007, 0x3c038000, 0x8c840004, 0x8f624450,
-0x21c02, 0x83102b, 0x1040fffc, 0x3c038000,
-0xaf634444, 0x8f624444, 0x431024, 0x1440fffd,
-0x0, 0x8f624448, 0x3e00008, 0x3042ffff,
-0x3c024000, 0x822025, 0xaf645c38, 0x8f625c30,
-0x30420002, 0x1440fffc, 0x0, 0x3e00008,
-0x0, 0x27bdffe0, 0x805821, 0x14c00011,
-0x256e0008, 0x3c020800, 0x8c4223f4, 0x10400007,
-0x24020016, 0x3c010800, 0xa42223d2, 0x2402002a,
-0x3c010800, 0xa000364, 0xa42223d4, 0x8d670010,
-0x71402, 0x3c010800, 0xa42223d2, 0x3c010800,
-0xa42723d4, 0x3c040800, 0x948423d4, 0x3c030800,
-0x946323d2, 0x95cf0006, 0x3c020800, 0x944223d0,
-0x832023, 0x1e2c023, 0x3065ffff, 0x24a20028,
-0x1c24821, 0x3082ffff, 0x14c0001a, 0x1226021,
-0x9582000c, 0x3042003f, 0x3c010800, 0xa42223d6,
-0x95820004, 0x95830006, 0x3c010800, 0xac2023e4,
-0x3c010800, 0xac2023e8, 0x21400, 0x431025,
-0x3c010800, 0xac221bc0, 0x95220004, 0x3c010800,
-0xa4221bc4, 0x95230002, 0x1e51023, 0x43102a,
-0x10400010, 0x24020001, 0x3c010800, 0xa000398,
-0xac2223f8, 0x3c030800, 0x8c6323e8, 0x3c020800,
-0x94421bc4, 0x431021, 0xa5220004, 0x3c020800,
-0x94421bc0, 0xa5820004, 0x3c020800, 0x8c421bc0,
-0xa5820006, 0x3c020800, 0x8c4223f0, 0x3c0d0800,
-0x8dad23e4, 0x3c0a0800, 0x144000e5, 0x8d4a23e8,
-0x3c020800, 0x94421bc4, 0x4a1821, 0x3063ffff,
-0x62182b, 0x24020002, 0x10c2000d, 0x1435023,
-0x3c020800, 0x944223d6, 0x30420009, 0x10400008,
-0x0, 0x9582000c, 0x3042fff6, 0xa582000c,
-0x3c020800, 0x944223d6, 0x30420009, 0x1a26823,
-0x3c020800, 0x8c4223f8, 0x1040004a, 0x1203821,
-0x3c020800, 0x944223d2, 0x4021, 0xa520000a,
-0x1e21023, 0xa5220002, 0x3082ffff, 0x21042,
-0x18400008, 0x3021, 0x401821, 0x94e20000,
-0x25080001, 0xc23021, 0x103102a, 0x1440fffb,
-0x24e70002, 0x61c02, 0x30c2ffff, 0x623021,
-0x61402, 0xc23021, 0xc02821, 0x61027,
-0xa522000a, 0x3021, 0x2527000c, 0x4021,
-0x94e20000, 0x25080001, 0xc23021, 0x2d020004,
-0x1440fffb, 0x24e70002, 0x95220002, 0x4021,
-0x91230009, 0x442023, 0x1803821, 0x3082ffff,
-0xa4e00010, 0x621821, 0x21042, 0x18400010,
-0xc33021, 0x404821, 0x94e20000, 0x24e70002,
-0xc23021, 0x30e2007f, 0x14400006, 0x25080001,
-0x8d630000, 0x3c02007f, 0x3442ff80, 0x625824,
-0x25670008, 0x109102a, 0x1440fff3, 0x0,
-0x30820001, 0x10400005, 0x61c02, 0xa0e00001,
-0x94e20000, 0xc23021, 0x61c02, 0x30c2ffff,
-0x623021, 0x61402, 0xc23021, 0xa00047d,
-0x30c6ffff, 0x24020002, 0x14c20081, 0x0,
-0x3c020800, 0x8c42240c, 0x14400007, 0x0,
-0x3c020800, 0x944223d2, 0x95230002, 0x1e21023,
-0x10620077, 0x0, 0x3c020800, 0x944223d2,
-0x1e21023, 0xa5220002, 0x3c020800, 0x8c42240c,
-0x1040001a, 0x31e3ffff, 0x8dc70010, 0x3c020800,
-0x94421b96, 0xe04021, 0x72c02, 0xaa2021,
-0x431023, 0x823823, 0x72402, 0x30e2ffff,
-0x823821, 0x71027, 0xa522000a, 0x3102ffff,
-0x3c040800, 0x948423d4, 0x453023, 0xe02821,
-0x641823, 0x6d1821, 0xc33021, 0x61c02,
-0x30c2ffff, 0xa00047d, 0x623021, 0x1203821,
-0x4021, 0x3082ffff, 0x21042, 0x18400008,
-0x3021, 0x401821, 0x94e20000, 0x25080001,
-0xc23021, 0x103102a, 0x1440fffb, 0x24e70002,
-0x61c02, 0x30c2ffff, 0x623021, 0x61402,
-0xc23021, 0xc02821, 0x61027, 0xa522000a,
-0x3021, 0x2527000c, 0x4021, 0x94e20000,
-0x25080001, 0xc23021, 0x2d020004, 0x1440fffb,
-0x24e70002, 0x95220002, 0x4021, 0x91230009,
-0x442023, 0x1803821, 0x3082ffff, 0xa4e00010,
-0x3c040800, 0x948423d4, 0x621821, 0xc33021,
-0x61c02, 0x30c2ffff, 0x623021, 0x61c02,
-0x3c020800, 0x944223d0, 0xc34821, 0x441023,
-0x21fc2, 0x431021, 0x21043, 0x18400010,
-0x3021, 0x402021, 0x94e20000, 0x24e70002,
-0xc23021, 0x30e2007f, 0x14400006, 0x25080001,
-0x8d630000, 0x3c02007f, 0x3442ff80, 0x625824,
-0x25670008, 0x104102a, 0x1440fff3, 0x0,
-0x3c020800, 0x944223ec, 0xc23021, 0x3122ffff,
-0xc23021, 0x61c02, 0x30c2ffff, 0x623021,
-0x61402, 0xc23021, 0xc04021, 0x61027,
-0xa5820010, 0xadc00014, 0xa00049d, 0xadc00000,
-0x8dc70010, 0xe04021, 0x11400007, 0x72c02,
-0xaa3021, 0x61402, 0x30c3ffff, 0x433021,
-0x61402, 0xc22821, 0x51027, 0xa522000a,
-0x3c030800, 0x946323d4, 0x3102ffff, 0x1e21021,
-0x433023, 0xcd3021, 0x61c02, 0x30c2ffff,
-0x623021, 0x61402, 0xc23021, 0xc04021,
-0x61027, 0xa5820010, 0x3102ffff, 0x51c00,
-0x431025, 0xadc20010, 0x3c020800, 0x8c4223f4,
-0x10400005, 0x2de205eb, 0x14400002, 0x25e2fff2,
-0x34028870, 0xa5c20034, 0x3c030800, 0x246323e8,
-0x8c620000, 0x24420001, 0xac620000, 0x3c040800,
-0x8c8423e4, 0x3c020800, 0x8c421bc0, 0x3303ffff,
-0x832021, 0x431821, 0x62102b, 0x3c010800,
-0xac2423e4, 0x10400003, 0x2482ffff, 0x3c010800,
-0xac2223e4, 0x3c010800, 0xac231bc0, 0x3e00008,
-0x27bd0020, 0x27bdffb8, 0x3c050800, 0x24a51b96,
-0xafbf0044, 0xafbe0040, 0xafb7003c, 0xafb60038,
-0xafb50034, 0xafb40030, 0xafb3002c, 0xafb20028,
-0xafb10024, 0xafb00020, 0x94a90000, 0x3c020800,
-0x944223d0, 0x3c030800, 0x8c631bb0, 0x3c040800,
-0x8c841bac, 0x1221023, 0x64182a, 0xa7a9001e,
-0x106000be, 0xa7a20016, 0x24be0022, 0x97b6001e,
-0x24b3001a, 0x24b70016, 0x8fc20000, 0x14400008,
-0x0, 0x8fc2fff8, 0x97a30016, 0x8fc4fff4,
-0x431021, 0x82202a, 0x148000b0, 0x0,
-0x97d50818, 0x32a2ffff, 0x104000a3, 0x9021,
-0x40a021, 0x8821, 0xe000625, 0x0,
-0x403021, 0x14c00007, 0x0, 0x3c020800,
-0x8c4223dc, 0x24420001, 0x3c010800, 0xa000596,
-0xac2223dc, 0x3c100800, 0x2118021, 0x8e101bc8,
-0x9608000a, 0x31020040, 0x10400005, 0x2407180c,
-0x8e02000c, 0x2407188c, 0x21400, 0xacc20018,
-0x31020080, 0x54400001, 0x34e70010, 0x3c020800,
-0x511021, 0x8c421bd0, 0x3c030800, 0x711821,
-0x8c631bd4, 0x21500, 0x31c00, 0x431025,
-0xacc20014, 0x96040008, 0x3242ffff, 0x821021,
-0x282102a, 0x14400002, 0x2b22823, 0x802821,
-0x8e020000, 0x2459021, 0xacc20000, 0x8e020004,
-0xc02021, 0x26310010, 0xac820004, 0x30e2ffff,
-0xac800008, 0xa485000e, 0xac820010, 0x24020305,
-0xe0005a2, 0xa482000c, 0x3242ffff, 0x54102b,
-0x1440ffc5, 0x3242ffff, 0xa00058e, 0x0,
-0x8e620000, 0x8e63fffc, 0x43102a, 0x10400067,
-0x0, 0x8e62fff0, 0x28900, 0x3c100800,
-0x2118021, 0xe000625, 0x8e101bc8, 0x403021,
-0x14c00005, 0x0, 0x8e62082c, 0x24420001,
-0xa000596, 0xae62082c, 0x9608000a, 0x31020040,
-0x10400005, 0x2407180c, 0x8e02000c, 0x2407188c,
-0x21400, 0xacc20018, 0x3c020800, 0x511021,
-0x8c421bd0, 0x3c030800, 0x711821, 0x8c631bd4,
-0x21500, 0x31c00, 0x431025, 0xacc20014,
-0x8e63fff4, 0x96020008, 0x432023, 0x3242ffff,
-0x3083ffff, 0x431021, 0x2c2102a, 0x10400003,
-0x802821, 0x97a9001e, 0x1322823, 0x8e620000,
-0x30a4ffff, 0x441021, 0xae620000, 0xa4c5000e,
-0x8e020000, 0xacc20000, 0x8e020004, 0x8e63fff4,
-0x431021, 0xacc20004, 0x8e63fff4, 0x96020008,
-0x641821, 0x62102a, 0x14400006, 0x2459021,
-0x8e62fff0, 0xae60fff4, 0x24420001, 0xa000571,
-0xae62fff0, 0xae63fff4, 0xacc00008, 0x3242ffff,
-0x10560003, 0x31020004, 0x10400006, 0x24020305,
-0x31020080, 0x54400001, 0x34e70010, 0x34e70020,
-0x24020905, 0xa4c2000c, 0x8ee30000, 0x8ee20004,
-0x14620007, 0x3c02b49a, 0x8ee20860, 0x54400001,
-0x34e70400, 0x3c024b65, 0xa000588, 0x34427654,
-0x344289ab, 0xacc2001c, 0x30e2ffff, 0xacc20010,
-0xe0005a2, 0xc02021, 0x3242ffff, 0x56102b,
-0x1440ff9b, 0x0, 0x8e620000, 0x8e63fffc,
-0x43102a, 0x1440ff48, 0x0, 0x8fbf0044,
-0x8fbe0040, 0x8fb7003c, 0x8fb60038, 0x8fb50034,
-0x8fb40030, 0x8fb3002c, 0x8fb20028, 0x8fb10024,
-0x8fb00020, 0x3e00008, 0x27bd0048, 0x27bdffe8,
-0xafbf0014, 0xafb00010, 0x8f624450, 0x8f634410,
-0xa0005b1, 0x808021, 0x8f626820, 0x30422000,
-0x10400003, 0x0, 0xe0001f0, 0x2021,
-0x8f624450, 0x8f634410, 0x3042ffff, 0x43102b,
-0x1440fff5, 0x0, 0x8f630c14, 0x3063000f,
-0x2c620002, 0x1440000b, 0x0, 0x8f630c14,
-0x3c020800, 0x8c421b40, 0x3063000f, 0x24420001,
-0x3c010800, 0xac221b40, 0x2c620002, 0x1040fff7,
-0x0, 0xaf705c18, 0x8f625c10, 0x30420002,
-0x10400009, 0x0, 0x8f626820, 0x30422000,
-0x1040fff8, 0x0, 0xe0001f0, 0x2021,
-0xa0005c4, 0x0, 0x8fbf0014, 0x8fb00010,
-0x3e00008, 0x27bd0018, 0x0, 0x0,
-0x0, 0x27bdffe8, 0x3c1bc000, 0xafbf0014,
-0xafb00010, 0xaf60680c, 0x8f626804, 0x34420082,
-0xaf626804, 0x8f634000, 0x24020b50, 0x3c010800,
-0xac221b54, 0x24020b78, 0x3c010800, 0xac221b64,
-0x34630002, 0xaf634000, 0xe000605, 0x808021,
-0x3c010800, 0xa0221b68, 0x304200ff, 0x24030002,
-0x14430005, 0x0, 0x3c020800, 0x8c421b54,
-0xa0005f8, 0xac5000c0, 0x3c020800, 0x8c421b54,
-0xac5000bc, 0x8f624434, 0x8f634438, 0x8f644410,
-0x3c010800, 0xac221b5c, 0x3c010800, 0xac231b6c,
-0x3c010800, 0xac241b58, 0x8fbf0014, 0x8fb00010,
-0x3e00008, 0x27bd0018, 0x3c040800, 0x8c870000,
-0x3c03aa55, 0x3463aa55, 0x3c06c003, 0xac830000,
-0x8cc20000, 0x14430007, 0x24050002, 0x3c0355aa,
-0x346355aa, 0xac830000, 0x8cc20000, 0x50430001,
-0x24050001, 0x3c020800, 0xac470000, 0x3e00008,
-0xa01021, 0x27bdfff8, 0x18800009, 0x2821,
-0x8f63680c, 0x8f62680c, 0x1043fffe, 0x0,
-0x24a50001, 0xa4102a, 0x1440fff9, 0x0,
-0x3e00008, 0x27bd0008, 0x8f634450, 0x3c020800,
-0x8c421b5c, 0x31c02, 0x43102b, 0x14400008,
-0x3c038000, 0x3c040800, 0x8c841b6c, 0x8f624450,
-0x21c02, 0x83102b, 0x1040fffc, 0x3c038000,
-0xaf634444, 0x8f624444, 0x431024, 0x1440fffd,
-0x0, 0x8f624448, 0x3e00008, 0x3042ffff,
-0x3082ffff, 0x2442e000, 0x2c422001, 0x14400003,
-0x3c024000, 0xa000648, 0x2402ffff, 0x822025,
-0xaf645c38, 0x8f625c30, 0x30420002, 0x1440fffc,
-0x1021, 0x3e00008, 0x0, 0x8f624450,
-0x3c030800, 0x8c631b58, 0xa000651, 0x3042ffff,
-0x8f624450, 0x3042ffff, 0x43102b, 0x1440fffc,
-0x0, 0x3e00008, 0x0, 0x27bdffe0,
-0x802821, 0x3c040800, 0x24841af0, 0x3021,
-0x3821, 0xafbf0018, 0xafa00010, 0xe00067c,
-0xafa00014, 0xa000660, 0x0, 0x8fbf0018,
-0x3e00008, 0x27bd0020, 0x0, 0x0,
-0x0, 0x3c020800, 0x34423000, 0x3c030800,
-0x34633000, 0x3c040800, 0x348437ff, 0x3c010800,
-0xac221b74, 0x24020040, 0x3c010800, 0xac221b78,
-0x3c010800, 0xac201b70, 0xac600000, 0x24630004,
-0x83102b, 0x5040fffd, 0xac600000, 0x3e00008,
-0x0, 0x804821, 0x8faa0010, 0x3c020800,
-0x8c421b70, 0x3c040800, 0x8c841b78, 0x8fab0014,
-0x24430001, 0x44102b, 0x3c010800, 0xac231b70,
-0x14400003, 0x4021, 0x3c010800, 0xac201b70,
-0x3c020800, 0x8c421b70, 0x3c030800, 0x8c631b74,
-0x91240000, 0x21140, 0x431021, 0x481021,
-0x25080001, 0xa0440000, 0x29020008, 0x1440fff4,
-0x25290001, 0x3c020800, 0x8c421b70, 0x3c030800,
-0x8c631b74, 0x8f64680c, 0x21140, 0x431021,
-0xac440008, 0xac45000c, 0xac460010, 0xac470014,
-0xac4a0018, 0x3e00008, 0xac4b001c, 0x0,
-0x0, 0x0 };
-U32 t3StkOffLdFwRodata[(0x60/4) + 1] = {
-0x4d61696e,
-0x43707542, 0x0, 0x4d61696e, 0x43707541,
-0x0, 0x0, 0x0, 0x73746b6f,
-0x66666c64, 0x496e0000, 0x73746b6f, 0x66662a2a,
-0x0, 0x53774576, 0x656e7430, 0x0,
-0x0, 0x0, 0x0, 0x66617461,
-0x6c457272, 0x0, 0x0, 0x0 };
-U32 t3StkOffLdFwData[(0x30/4) + 1] = {
-0x0, 0x73746b6f, 0x66666c64,
-0x5f76312e, 0x362e3000, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0 };
-
-#endif /* __FW_STKOFFLD_H__ */
+++ /dev/null
-/*
- * HND SiliconBackplane Gigabit Ethernet core software interface
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#include <typedefs.h>
-#include <osl.h>
-#include <pcicfg.h>
-#include <sbconfig.h>
-#include <sbutils.h>
-#include "sbgige.h"
-#include <hndpci.h>
-#include "hndgige.h"
-
-uint32
-sb_base(uint32 admatch)
-{
- uint32 base;
- uint type;
-
- type = admatch & SBAM_TYPE_MASK;
- ASSERT(type < 3);
-
- base = 0;
-
- if (type == 0) {
- base = admatch & SBAM_BASE0_MASK;
- } else if (type == 1) {
- ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
- base = admatch & SBAM_BASE1_MASK;
- } else if (type == 2) {
- ASSERT(!(admatch & SBAM_ADNEG)); /* neg not supported */
- base = admatch & SBAM_BASE2_MASK;
- }
-
- return (base);
-}
-
-/*
- * Setup the gige core.
- * Resetting the core will lose all settings.
- */
-void
-sb_gige_init(sb_t *sbh, uint32 unit, bool *rgmii)
-{
- volatile pci_config_regs *pci;
- sbgige_pcishim_t *ocp;
- sbconfig_t *sb;
- osl_t *osh;
- uint32 statelow;
- uint32 statehigh;
- uint32 base;
- uint32 idx;
- void *regs;
-
- /* Sanity checks */
- ASSERT(sbh);
- ASSERT(rgmii);
-
- idx = sb_coreidx(sbh);
-
- /* point to the gige core registers */
- regs = sb_setcore(sbh, SB_GIGETH, unit);
- ASSERT(regs);
-
- osh = sb_osh(sbh);
-
- pci = &((sbgige_t *)regs)->pcicfg;
- ocp = &((sbgige_t *)regs)->pcishim;
- sb = &((sbgige_t *)regs)->sbconfig;
-
- /* Enable the core clock and memory access */
- if (!sb_iscoreup(sbh))
- sb_core_reset(sbh, 0, 0);
-
- /*
- * Setup the 64K memory-mapped region base address through BAR0.
- * Leave the other BAR values alone.
- */
- base = sb_base(R_REG(osh, &sb->sbadmatch1));
- W_REG(osh, &pci->base[0], base);
- W_REG(osh, &pci->base[1], 0);
-
- /*
- * Enable the PCI memory access anyway. Any PCI config commands
- * issued before the core is enabled will go to the emulation
- * only and will not go to the real PCI config registers.
- */
- OR_REG(osh, &pci->command, 2);
-
- /*
- * Enable the posted write flush scheme as follows:
- *
- * - Enable flush on any core register read
- * - Enable timeout on the flush
- * - Disable the interrupt mask when flushing
- *
- * This differs from the default setting only in that interrupts are
- * not masked. Since posted writes are not flushed on interrupt, the
- * driver must explicitly request a flush in its interrupt handling
- * by reading a core register.
- */
- W_REG(osh, &ocp->FlushStatusControl, 0x68);
-
- /*
- * Determine whether the GbE is in GMII or RGMII mode. This is
- * indicated in bit 16 of the SBTMStateHigh register, which is
- * part of the core-specific flags field.
- *
- * For GMII, bypass the Rx/Tx DLLs, i.e. add no delay to RXC/GTXC
- * within the core. For RGMII, do not bypass the DLLs, resulting
- * in added delay for RXC/GTXC. The SBTMStateLow register contains
- * the controls for doing this in the core-specific flags field:
- *
- * bit 24 - Enable DLL controls
- * bit 20 - Bypass Rx DLL
- * bit 19 - Bypass Tx DLL
- */
- statelow = R_REG(osh, &sb->sbtmstatelow); /* DLL controls */
- statehigh = R_REG(osh, &sb->sbtmstatehigh); /* GMII/RGMII mode */
- if ((statehigh & (1 << 16)) != 0) /* RGMII */
- {
- statelow &= ~(1 << 20); /* no Rx bypass (delay) */
- statelow &= ~(1 << 19); /* no Tx bypass (delay) */
- *rgmii = TRUE;
- }
- else /* GMII */
- {
- statelow |= (1 << 20); /* Rx bypass (no delay) */
- statelow |= (1 << 19); /* Tx bypass (no delay) */
- *rgmii = FALSE;
- }
- statelow |= (1 << 24); /* enable DLL controls */
- W_REG(osh, &sb->sbtmstatelow, statelow);
-
- sb_setcoreidx(sbh, idx);
-}
+++ /dev/null
-/*
- * HND SiliconBackplane Gigabit Ethernet core software interface.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _hndgige_h_
-#define _hndgige_h_
-
-extern void sb_gige_init(sb_t *sbh, uint32 unit, bool *rgmii);
-
-#endif /* _hndgige_h_ */
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* History: */
-/* 02/25/00 Hav Khauv Initial version. */
-/******************************************************************************/
-
-#ifndef LM_H
-#define LM_H
-
-#include "queue.h"
-#include "bits.h"
-
-
-
-/******************************************************************************/
-/* Basic types. */
-/******************************************************************************/
-
-typedef char LM_CHAR, *PLM_CHAR;
-typedef unsigned int LM_UINT, *PLM_UINT;
-typedef unsigned char LM_UINT8, *PLM_UINT8;
-typedef unsigned short LM_UINT16, *PLM_UINT16;
-typedef unsigned int LM_UINT32, *PLM_UINT32;
-typedef unsigned int LM_COUNTER, *PLM_COUNTER;
-typedef void LM_VOID, *PLM_VOID;
-typedef char LM_BOOL, *PLM_BOOL;
-
-/* 64bit value. */
-typedef struct {
-#ifdef BIG_ENDIAN_HOST
- LM_UINT32 High;
- LM_UINT32 Low;
-#else /* BIG_ENDIAN_HOST */
- LM_UINT32 Low;
- LM_UINT32 High;
-#endif /* !BIG_ENDIAN_HOST */
-} LM_UINT64, *PLM_UINT64;
-
-typedef LM_UINT64 LM_PHYSICAL_ADDRESS, *PLM_PHYSICAL_ADDRESS;
-
-/* void LM_INC_PHYSICAL_ADDRESS(PLM_PHYSICAL_ADDRESS pAddr,LM_UINT32 IncSize) */
-#define LM_INC_PHYSICAL_ADDRESS(pAddr, IncSize) \
- { \
- LM_UINT32 OrgLow; \
- \
- OrgLow = (pAddr)->Low; \
- (pAddr)->Low += IncSize; \
- if((pAddr)->Low < OrgLow) { \
- (pAddr)->High++; /* Wrap around. */ \
- } \
- }
-
-
-#ifndef TRUE
-#define TRUE 1
-#endif /* TRUE */
-
-#ifndef FALSE
-#define FALSE 0
-#endif /* FALSE */
-
-#ifndef NULL
-#define NULL ((void *) 0)
-#endif /* NULL */
-
-#ifndef OFFSETOF
-#define OFFSETOF(_s, _m) (MM_UINT_PTR(&(((_s *) 0)->_m)))
-#endif /* OFFSETOF */
-
-
-
-/******************************************************************************/
-/* Simple macros. */
-/******************************************************************************/
-
-#define IS_ETH_BROADCAST(_pEthAddr) \
- (((unsigned char *) (_pEthAddr))[0] == ((unsigned char) 0xff))
-
-#define IS_ETH_MULTICAST(_pEthAddr) \
- (((unsigned char *) (_pEthAddr))[0] & ((unsigned char) 0x01))
-
-#define IS_ETH_ADDRESS_EQUAL(_pEtherAddr1, _pEtherAddr2) \
- ((((unsigned char *) (_pEtherAddr1))[0] == \
- ((unsigned char *) (_pEtherAddr2))[0]) && \
- (((unsigned char *) (_pEtherAddr1))[1] == \
- ((unsigned char *) (_pEtherAddr2))[1]) && \
- (((unsigned char *) (_pEtherAddr1))[2] == \
- ((unsigned char *) (_pEtherAddr2))[2]) && \
- (((unsigned char *) (_pEtherAddr1))[3] == \
- ((unsigned char *) (_pEtherAddr2))[3]) && \
- (((unsigned char *) (_pEtherAddr1))[4] == \
- ((unsigned char *) (_pEtherAddr2))[4]) && \
- (((unsigned char *) (_pEtherAddr1))[5] == \
- ((unsigned char *) (_pEtherAddr2))[5]))
-
-#define COPY_ETH_ADDRESS(_Src, _Dst) \
- ((unsigned char *) (_Dst))[0] = ((unsigned char *) (_Src))[0]; \
- ((unsigned char *) (_Dst))[1] = ((unsigned char *) (_Src))[1]; \
- ((unsigned char *) (_Dst))[2] = ((unsigned char *) (_Src))[2]; \
- ((unsigned char *) (_Dst))[3] = ((unsigned char *) (_Src))[3]; \
- ((unsigned char *) (_Dst))[4] = ((unsigned char *) (_Src))[4]; \
- ((unsigned char *) (_Dst))[5] = ((unsigned char *) (_Src))[5];
-
-
-
-/******************************************************************************/
-/* Constants. */
-/******************************************************************************/
-
-#define ETHERNET_ADDRESS_SIZE 6
-#define ETHERNET_PACKET_HEADER_SIZE 14
-#define MIN_ETHERNET_PACKET_SIZE 64 /* with 4 byte crc. */
-#define MAX_ETHERNET_PACKET_SIZE 1518 /* with 4 byte crc. */
-#define MIN_ETHERNET_PACKET_SIZE_NO_CRC 60
-#define MAX_ETHERNET_PACKET_SIZE_NO_CRC 1514
-#define MAX_ETHERNET_PACKET_BUFFER_SIZE 1536 /* A nice even number. */
-#define MAX_ETHERNET_JUMBO_PACKET_SIZE_NO_CRC 9014
-
-#ifndef LM_MAX_MC_TABLE_SIZE
-#define LM_MAX_MC_TABLE_SIZE 32
-#endif /* LM_MAX_MC_TABLE_SIZE */
-#define LM_MC_ENTRY_SIZE (ETHERNET_ADDRESS_SIZE+1)
-#define LM_MC_INSTANCE_COUNT_INDEX (LM_MC_ENTRY_SIZE-1)
-
-
-/* Receive filter masks. */
-#define LM_ACCEPT_UNICAST 0x0001
-#define LM_ACCEPT_MULTICAST 0x0002
-#define LM_ACCEPT_ALL_MULTICAST 0x0004
-#define LM_ACCEPT_BROADCAST 0x0008
-#define LM_ACCEPT_ERROR_PACKET 0x0010
-#define LM_KEEP_VLAN_TAG 0x0020
-
-#define LM_PROMISCUOUS_MODE 0x10000
-
-
-
-/******************************************************************************/
-/* PCI registers. */
-/******************************************************************************/
-
-#define PCI_VENDOR_ID_REG 0x00
-#define PCI_DEVICE_ID_REG 0x02
-
-#define PCI_COMMAND_REG 0x04
-#define PCI_IO_SPACE_ENABLE 0x0001
-#define PCI_MEM_SPACE_ENABLE 0x0002
-#define PCI_BUSMASTER_ENABLE 0x0004
-#define PCI_MEMORY_WRITE_INVALIDATE 0x0010
-#define PCI_PARITY_ERROR_ENABLE 0x0040
-#define PCI_SYSTEM_ERROR_ENABLE 0x0100
-#define PCI_FAST_BACK_TO_BACK_ENABLE 0x0200
-
-#define PCI_STATUS_REG 0x06
-#define PCI_REV_ID_REG 0x08
-
-#define PCI_CACHE_LINE_SIZE_REG 0x0c
-
-#define PCI_IO_BASE_ADDR_REG 0x10
-#define PCI_IO_BASE_ADDR_MASK 0xfffffff0
-
-#define PCI_MEM_BASE_ADDR_LOW 0x10
-#define PCI_MEM_BASE_ADDR_HIGH 0x14
-
-#define PCI_SUBSYSTEM_VENDOR_ID_REG 0x2c
-#define PCI_SUBSYSTEM_ID_REG 0x2e
-#define PCI_INT_LINE_REG 0x3c
-
-#define PCIX_CAP_REG 0x40
-#define PCIX_ENABLE_RELAXED_ORDERING BIT_17
-
-/******************************************************************************/
-/* Fragment structure. */
-/******************************************************************************/
-
-typedef struct {
- LM_UINT32 FragSize;
- LM_PHYSICAL_ADDRESS FragBuf;
-} LM_FRAG, *PLM_FRAG;
-
-typedef struct {
- /* FragCount is initialized for the caller to the maximum array size, on */
- /* return FragCount is the number of the actual fragments in the array. */
- LM_UINT32 FragCount;
-
- /* Total buffer size. */
- LM_UINT32 TotalSize;
-
- /* Fragment array buffer. */
- LM_FRAG Fragments[1];
-} LM_FRAG_LIST, *PLM_FRAG_LIST;
-
-#define DECLARE_FRAG_LIST_BUFFER_TYPE(_FRAG_LIST_TYPE_NAME, _MAX_FRAG_COUNT) \
- typedef struct { \
- LM_FRAG_LIST FragList; \
- LM_FRAG FragListBuffer[_MAX_FRAG_COUNT-1]; \
- } _FRAG_LIST_TYPE_NAME, *P##_FRAG_LIST_TYPE_NAME
-
-
-
-/******************************************************************************/
-/* Status codes. */
-/******************************************************************************/
-
-#define LM_STATUS_SUCCESS 0
-#define LM_STATUS_FAILURE 1
-
-#define LM_STATUS_INTERRUPT_ACTIVE 2
-#define LM_STATUS_INTERRUPT_NOT_ACTIVE 3
-
-#define LM_STATUS_LINK_ACTIVE 4
-#define LM_STATUS_LINK_DOWN 5
-#define LM_STATUS_LINK_SETTING_MISMATCH 6
-
-#define LM_STATUS_TOO_MANY_FRAGMENTS 7
-#define LM_STATUS_TRANSMIT_ABORTED 8
-#define LM_STATUS_TRANSMIT_ERROR 9
-#define LM_STATUS_RECEIVE_ABORTED 10
-#define LM_STATUS_RECEIVE_ERROR 11
-#define LM_STATUS_INVALID_PACKET_SIZE 12
-#define LM_STATUS_OUT_OF_MAP_REGISTERS 13
-#define LM_STATUS_UNKNOWN_ADAPTER 14
-
-typedef LM_UINT LM_STATUS, *PLM_STATUS;
-
-
-/******************************************************************************/
-/* Line speed. */
-/******************************************************************************/
-
-#define LM_LINE_SPEED_UNKNOWN 0
-#define LM_LINE_SPEED_AUTO LM_LINE_SPEED_UNKNOWN
-#define LM_LINE_SPEED_10MBPS 10
-#define LM_LINE_SPEED_100MBPS 100
-#define LM_LINE_SPEED_1000MBPS 1000
-
-typedef LM_UINT32 LM_LINE_SPEED, *PLM_LINE_SPEED;
-
-
-
-/******************************************************************************/
-/* Duplex mode. */
-/******************************************************************************/
-
-#define LM_DUPLEX_MODE_UNKNOWN 0
-#define LM_DUPLEX_MODE_HALF 1
-#define LM_DUPLEX_MODE_FULL 2
-
-typedef LM_UINT32 LM_DUPLEX_MODE, *PLM_DUPLEX_MODE;
-
-
-
-/******************************************************************************/
-/* Power state. */
-/******************************************************************************/
-
-#define LM_POWER_STATE_D0 0
-#define LM_POWER_STATE_D1 1
-#define LM_POWER_STATE_D2 2
-#define LM_POWER_STATE_D3 3
-
-typedef LM_UINT32 LM_POWER_STATE, *PLM_POWER_STATE;
-
-
-
-/******************************************************************************/
-/* Task offloading. */
-/******************************************************************************/
-
-#define LM_TASK_OFFLOAD_NONE 0x0000
-#define LM_TASK_OFFLOAD_TX_IP_CHECKSUM 0x0001
-#define LM_TASK_OFFLOAD_RX_IP_CHECKSUM 0x0002
-#define LM_TASK_OFFLOAD_TX_TCP_CHECKSUM 0x0004
-#define LM_TASK_OFFLOAD_RX_TCP_CHECKSUM 0x0008
-#define LM_TASK_OFFLOAD_TX_UDP_CHECKSUM 0x0010
-#define LM_TASK_OFFLOAD_RX_UDP_CHECKSUM 0x0020
-#define LM_TASK_OFFLOAD_TCP_SEGMENTATION 0x0040
-
-typedef LM_UINT32 LM_TASK_OFFLOAD, *PLM_TASK_OFFLOAD;
-
-
-
-/******************************************************************************/
-/* Flow control. */
-/******************************************************************************/
-
-#define LM_FLOW_CONTROL_NONE 0x00
-#define LM_FLOW_CONTROL_RECEIVE_PAUSE 0x01
-#define LM_FLOW_CONTROL_TRANSMIT_PAUSE 0x02
-#define LM_FLOW_CONTROL_RX_TX_PAUSE (LM_FLOW_CONTROL_RECEIVE_PAUSE | \
- LM_FLOW_CONTROL_TRANSMIT_PAUSE)
-
-/* This value can be or-ed with RECEIVE_PAUSE and TRANSMIT_PAUSE. If the */
-/* auto-negotiation is disabled and the RECEIVE_PAUSE and TRANSMIT_PAUSE */
-/* bits are set, then flow control is enabled regardless of link partner's */
-/* flow control capability. */
-#define LM_FLOW_CONTROL_AUTO_PAUSE 0x80000000
-
-typedef LM_UINT32 LM_FLOW_CONTROL, *PLM_FLOW_CONTROL;
-
-
-
-/******************************************************************************/
-/* Wake up mode. */
-/******************************************************************************/
-
-#define LM_WAKE_UP_MODE_NONE 0
-#define LM_WAKE_UP_MODE_MAGIC_PACKET 1
-#define LM_WAKE_UP_MODE_NWUF 2
-#define LM_WAKE_UP_MODE_LINK_CHANGE 4
-
-typedef LM_UINT32 LM_WAKE_UP_MODE, *PLM_WAKE_UP_MODE;
-
-
-
-/******************************************************************************/
-/* Counters. */
-/******************************************************************************/
-
-#define LM_COUNTER_FRAMES_XMITTED_OK 0
-#define LM_COUNTER_FRAMES_RECEIVED_OK 1
-#define LM_COUNTER_ERRORED_TRANSMIT_COUNT 2
-#define LM_COUNTER_ERRORED_RECEIVE_COUNT 3
-#define LM_COUNTER_RCV_CRC_ERROR 4
-#define LM_COUNTER_ALIGNMENT_ERROR 5
-#define LM_COUNTER_SINGLE_COLLISION_FRAMES 6
-#define LM_COUNTER_MULTIPLE_COLLISION_FRAMES 7
-#define LM_COUNTER_FRAMES_DEFERRED 8
-#define LM_COUNTER_MAX_COLLISIONS 9
-#define LM_COUNTER_RCV_OVERRUN 10
-#define LM_COUNTER_XMIT_UNDERRUN 11
-#define LM_COUNTER_UNICAST_FRAMES_XMIT 12
-#define LM_COUNTER_MULTICAST_FRAMES_XMIT 13
-#define LM_COUNTER_BROADCAST_FRAMES_XMIT 14
-#define LM_COUNTER_UNICAST_FRAMES_RCV 15
-#define LM_COUNTER_MULTICAST_FRAMES_RCV 16
-#define LM_COUNTER_BROADCAST_FRAMES_RCV 17
-
-typedef LM_UINT32 LM_COUNTER_TYPE, *PLM_COUNTER_TYPE;
-
-
-typedef LM_UINT32 LM_RESET_TYPE;
-#define LM_SHUTDOWN_RESET 0
-#define LM_INIT_RESET 1
-#define LM_SUSPEND_RESET 2
-
-/******************************************************************************/
-/* Forward definition. */
-/******************************************************************************/
-
-typedef struct _LM_DEVICE_BLOCK *PLM_DEVICE_BLOCK;
-typedef struct _LM_PACKET *PLM_PACKET;
-
-
-
-/******************************************************************************/
-/* Function prototypes. */
-/******************************************************************************/
-
-LM_STATUS LM_GetAdapterInfo(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_InitializeAdapter(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_ResetAdapter(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_DisableInterrupt(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_EnableInterrupt(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_SendPacket(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS LM_ServiceInterrupts(PLM_DEVICE_BLOCK pDevice);
-#ifdef BCM_NAPI_RXPOLL
-int LM_ServiceRxPoll(PLM_DEVICE_BLOCK pDevice, int limit);
-#endif
-LM_STATUS LM_QueueRxPackets(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_SetReceiveMask(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask);
-LM_STATUS LM_Halt(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_Abort(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_MulticastAdd(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
-LM_STATUS LM_MulticastDel(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
-LM_STATUS LM_MulticastClear(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_SetMacAddress(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMacAddress);
-LM_STATUS LM_LoopbackAddress(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pAddress);
-
-LM_UINT32 LM_GetCrcCounter(PLM_DEVICE_BLOCK pDevice);
-
-LM_WAKE_UP_MODE LM_PMCapabilities(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_NwufAdd(PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
- LM_UINT8 *pByteMask, LM_UINT8 *pPattern);
-LM_STATUS LM_NwufRemove(PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
- LM_UINT8 *pByteMask, LM_UINT8 *pPattern);
-LM_STATUS LM_SetPowerState(PLM_DEVICE_BLOCK pDevice, LM_POWER_STATE PowerLevel);
-
-LM_VOID LM_ReadPhy(PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
- PLM_UINT32 pData32);
-LM_VOID LM_WritePhy(PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
- LM_UINT32 Data32);
-
-/* MII read/write functions to export to the robo support code */
-LM_UINT16 robo_miird(void *h, int phyadd, int regoff);
-void robo_miiwr(void *h, int phyadd, int regoff, LM_UINT16 value);
-
-
-LM_STATUS LM_EnableMacLoopBack(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_DisableMacLoopBack(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_EnablePhyLoopBack(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_DisablePhyLoopBack(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_EnableExtLoopBack(PLM_DEVICE_BLOCK pDevice, LM_LINE_SPEED Speed);
-LM_STATUS LM_DisableExtLoopBack(PLM_DEVICE_BLOCK pDevice);
-
-LM_STATUS LM_SetupPhy(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_BlinkLED(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDuration);
-LM_STATUS LM_GetStats(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_NvramRead(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT32 *pData);
-LM_STATUS LM_NvramWriteBlock(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT32 *pData, LM_UINT32 Size);
-LM_VOID LM_ResetPhy(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_ShutdownChip(PLM_DEVICE_BLOCK pDevice, LM_RESET_TYPE Mode);
-LM_STATUS LM_HaltCpu(PLM_DEVICE_BLOCK pDevice,LM_UINT32 cpu_number);
-LM_UINT32 ComputeCrc32(LM_UINT8 *pBuffer, LM_UINT32 BufferSize);
-LM_STATUS LM_SwitchClocks(PLM_DEVICE_BLOCK pDevice);
-
-void LM_5714_FamForceFiber( PLM_DEVICE_BLOCK pDevice);
-void LM_5714_FamGoFiberAutoNeg( PLM_DEVICE_BLOCK pDevice);
-void LM_5714_FamFiberCheckLink( PLM_DEVICE_BLOCK pDevice);
-
-/******************************************************************************/
-/* These are the OS specific functions called by LMAC. */
-/******************************************************************************/
-
-LM_STATUS MM_ReadConfig16(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT16 *pValue16);
-LM_STATUS MM_WriteConfig16(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT16 Value16);
-LM_STATUS MM_ReadConfig32(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT32 *pValue32);
-LM_STATUS MM_WriteConfig32(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
- LM_UINT32 Value32);
-LM_STATUS MM_MapMemBase(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_MapIoBase(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_IndicateRxPackets(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_IndicateTxPackets(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_StartTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS MM_CompleteTxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS MM_AllocateMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
- PLM_VOID *pMemoryBlockVirt);
-LM_STATUS MM_AllocateSharedMemory(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
- PLM_VOID *pMemoryBlockVirt, PLM_PHYSICAL_ADDRESS pMemoryBlockPhy,
- LM_BOOL Cached);
-LM_STATUS MM_GetConfig(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_IndicateStatus(PLM_DEVICE_BLOCK pDevice, LM_STATUS Status);
-LM_STATUS MM_InitializeUmPackets(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_FreeRxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS MM_CoalesceTxBuffer(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-PLM_DEVICE_BLOCK MM_FindPeerDev(PLM_DEVICE_BLOCK pDevice);
-int MM_FindCapability(PLM_DEVICE_BLOCK pDevice, int capability);
-LM_VOID MM_UnmapRxDma(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-#ifdef BCM_NAPI_RXPOLL
-LM_STATUS MM_ScheduleRxPoll(PLM_DEVICE_BLOCK pDevice);
-#endif
-LM_STATUS MM_Sleep(PLM_DEVICE_BLOCK pDevice, LM_UINT32 msec);
-LM_STATUS LM_MbufWorkAround(PLM_DEVICE_BLOCK pDevice);
-
-#ifdef INCLUDE_5703_A0_FIX
-LM_STATUS LM_Load5703DmaWFirmware(PLM_DEVICE_BLOCK pDevice);
-#endif
-
-/* Debugging support */
-
-extern int b57_msg_level;
-
-#define B57_ERR_VAL 1
-#define B57_INFO_VAL 2
-
-#define B57_ERR(args) do {if (b57_msg_level & B57_ERR_VAL) printf args;} while (0)
-#define B57_INFO(args) do {if (b57_msg_level & B57_INFO_VAL) printf args;} while (0)
-
-#endif /* LM_H */
-
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/******************************************************************************/
-
-
-#ifndef MM_H
-#define MM_H
-
-#include <linux/config.h>
-
-#if defined(CONFIG_SMP) && !defined(__SMP__)
-#define __SMP__
-#endif
-
-#if defined(CONFIG_MODVERSIONS) && defined(MODULE) && !defined(MODVERSIONS)
-#ifndef BCM_SMALL_DRV
-#define MODVERSIONS
-#endif
-#endif
-
-#ifndef B57UM
-#define __NO_VERSION__
-#endif
-#include <linux/version.h>
-
-#ifdef MODULE
-
-#if defined(MODVERSIONS) && (LINUX_VERSION_CODE < 0x020500)
-#ifndef BCM_SMALL_DRV
-#include <linux/modversions.h>
-#endif
-#endif
-
-#if (LINUX_VERSION_CODE < 0x020605)
-#include <linux/module.h>
-#else
-#include <linux/moduleparam.h>
-#endif
-
-#else
-
-#define MOD_INC_USE_COUNT
-#define MOD_DEC_USE_COUNT
-#define SET_MODULE_OWNER(dev)
-#define MODULE_DEVICE_TABLE(pci, pci_tbl)
-#endif
-
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/reboot.h>
-#include <asm/processor.h> /* Processor type for cache alignment. */
-#include <asm/bitops.h>
-#include <asm/io.h>
-#include <asm/unaligned.h>
-#include <linux/delay.h>
-#include <asm/byteorder.h>
-#include <linux/time.h>
-#include <asm/uaccess.h>
-#if (LINUX_VERSION_CODE >= 0x020400)
-#if (LINUX_VERSION_CODE < 0x020500)
-#include <linux/wrapper.h>
-#endif
-#include <linux/ethtool.h>
-#endif
-#ifdef CONFIG_PROC_FS
-#include <linux/smp_lock.h>
-#include <linux/proc_fs.h>
-#define BCM_PROC_FS 1
-#endif
-#ifdef NETIF_F_HW_VLAN_TX
-#include <linux/if_vlan.h>
-#define BCM_VLAN 1
-#endif
-#ifdef NETIF_F_TSO
-#define BCM_TSO 1
-#define INCLUDE_TCP_SEG_SUPPORT 1
-#include <net/ip.h>
-#include <net/tcp.h>
-#include <net/checksum.h>
-#endif
-
-#ifndef LINUX_KERNEL_VERSION
-#define LINUX_KERNEL_VERSION 0
-#endif
-
-#ifndef MAX_SKB_FRAGS
-#define MAX_SKB_FRAGS 0
-#endif
-
-#if (LINUX_VERSION_CODE >= 0x020400)
-#ifndef ETHTOOL_GEEPROM
-
-#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
-#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data */
-
-/* for passing EEPROM chunks */
-struct ethtool_eeprom {
- u32 cmd;
- u32 magic;
- u32 offset; /* in bytes */
- u32 len; /* in bytes */
- u8 data[0];
-};
-#define BCM_EEDUMP_LEN(info_p, size) *((u32 *) &((info_p)->reserved1[24]))=size
-
-#else
-
-#define BCM_EEDUMP_LEN(info_p, size) (info_p)->eedump_len=size
-
-#endif
-#endif
-
-#define BCM_INT_COAL 1
-#define BCM_NIC_SEND_BD 1
-#define BCM_ASF 1
-#define BCM_WOL 1
-#define BCM_TASKLET 1
-
-#if HAVE_NETIF_RECEIVE_SKB
-#define BCM_NAPI_RXPOLL 1
-#undef BCM_TASKLET
-#endif
-
-#if defined(CONFIG_PPC64)
-#define BCM_DISCONNECT_AT_CACHELINE 1
-#endif
-
-#ifdef BCM_SMALL_DRV
-#undef BCM_PROC_FS
-#undef ETHTOOL_GEEPROM
-#undef ETHTOOL_SEEPROM
-#undef ETHTOOL_GREGS
-#undef ETHTOOL_GPAUSEPARAM
-#undef ETHTOOL_GRXCSUM
-#undef ETHTOOL_TEST
-#undef BCM_INT_COAL
-#undef BCM_NIC_SEND_BD
-#undef BCM_WOL
-#undef BCM_TASKLET
-#undef BCM_TSO
-#endif
-
-#ifdef __BIG_ENDIAN
-#define BIG_ENDIAN_HOST 1
-#endif
-
-#define MM_SWAP_LE32(x) cpu_to_le32(x)
-#define MM_SWAP_BE32(x) cpu_to_be32(x)
-
-#if (LINUX_VERSION_CODE < 0x020327)
-#define __raw_readl readl
-#define __raw_writel writel
-#endif
-
-#define MM_MEMWRITEL(ptr, val) __raw_writel(val, ptr)
-#define MM_MEMREADL(ptr) __raw_readl(ptr)
-
-typedef atomic_t MM_ATOMIC_T;
-
-#define MM_ATOMIC_SET(ptr, val) atomic_set(ptr, val)
-#define MM_ATOMIC_READ(ptr) atomic_read(ptr)
-#define MM_ATOMIC_INC(ptr) atomic_inc(ptr)
-#define MM_ATOMIC_ADD(ptr, val) atomic_add(val, ptr)
-#define MM_ATOMIC_DEC(ptr) atomic_dec(ptr)
-#define MM_ATOMIC_SUB(ptr, val) atomic_sub(val, ptr)
-
-
-#ifndef mmiowb
-#define mmiowb()
-#endif
-
-
-#define MM_MB() mb()
-#define MM_WMB() wmb()
-#define MM_RMB() rmb()
-#define MM_MMIOWB() mmiowb()
-
-#include "lm.h"
-#include "queue.h"
-#include "tigon3.h"
-
-#if DBG
-#define STATIC
-#else
-#define STATIC static
-#endif
-
-extern int MM_Packet_Desc_Size;
-
-#define MM_PACKET_DESC_SIZE MM_Packet_Desc_Size
-
-DECLARE_QUEUE_TYPE(UM_RX_PACKET_Q, MAX_RX_PACKET_DESC_COUNT+1);
-
-#define MAX_MEM 16
-#define MAX_MEM2 4
-
-#if (LINUX_VERSION_CODE < 0x020211)
-typedef u32 dma_addr_t;
-#endif
-
-#if (LINUX_VERSION_CODE < 0x02032a)
-#define pci_map_single(dev, address, size, dir) virt_to_bus(address)
-#define pci_unmap_single(dev, dma_addr, size, dir)
-#endif
-
-#if MAX_SKB_FRAGS
-#if (LINUX_VERSION_CODE >= 0x02040d)
-
-typedef dma_addr_t dmaaddr_high_t;
-
-#else
-
-#if defined(CONFIG_HIGHMEM) && defined(CONFIG_X86) && !defined(CONFIG_X86_64)
-
-#if defined(CONFIG_HIGHMEM64G)
-typedef unsigned long long dmaaddr_high_t;
-#else
-typedef dma_addr_t dmaaddr_high_t;
-#endif
-
-#ifndef pci_map_page
-#define pci_map_page bcm_pci_map_page
-#endif
-
-static inline dmaaddr_high_t
-bcm_pci_map_page(struct pci_dev *dev, struct page *page,
- int offset, size_t size, int dir)
-{
- dmaaddr_high_t phys;
-
- phys = (page-mem_map) * (dmaaddr_high_t) PAGE_SIZE + offset;
-
- return phys;
-}
-
-#ifndef pci_unmap_page
-#define pci_unmap_page(dev, map, size, dir)
-#endif
-
-#else /* #if defined(CONFIG_HIGHMEM) && defined(CONFIG_X86) && ! defined(CONFIG_X86_64)*/
-
-typedef dma_addr_t dmaaddr_high_t;
-
-/* Warning - This may not work for all architectures if HIGHMEM is defined */
-
-#ifndef pci_map_page
-#define pci_map_page(dev, page, offset, size, dir) \
- pci_map_single(dev, page_address(page) + (offset), size, dir)
-#endif
-#ifndef pci_unmap_page
-#define pci_unmap_page(dev, map, size, dir) \
- pci_unmap_single(dev, map, size, dir)
-#endif
-
-#endif /* #if defined(CONFIG_HIGHMEM) && defined(CONFIG_X86) && ! defined(CONFIG_X86_64)*/
-
-#endif /* #if (LINUX_VERSION_CODE >= 0x02040d)*/
-#endif /* #if MAX_SKB_FRAGS*/
-
-#if defined(CONFIG_X86) && !defined(CONFIG_X86_64)
-#define NO_PCI_UNMAP 1
-#endif
-
-#if (LINUX_VERSION_CODE < 0x020412)
-#if !defined(NO_PCI_UNMAP)
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) dma_addr_t ADDR_NAME;
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) __u32 LEN_NAME;
-
-#define pci_unmap_addr(PTR, ADDR_NAME) \
- ((PTR)->ADDR_NAME)
-
-#define pci_unmap_len(PTR, LEN_NAME) \
- ((PTR)->LEN_NAME)
-
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \
- (((PTR)->ADDR_NAME) = (VAL))
-
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
- (((PTR)->LEN_NAME) = (VAL))
-#else
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(ADDR_NAME)
-
-#define pci_unmap_addr(PTR, ADDR_NAME) 0
-#define pci_unmap_len(PTR, LEN_NAME) 0
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-#endif
-#endif
-
-#if (LINUX_VERSION_CODE < 0x02030e)
-#define net_device device
-#define netif_carrier_on(dev)
-#define netif_carrier_off(dev)
-#endif
-
-#if (LINUX_VERSION_CODE < 0x02032b)
-#define tasklet_struct tq_struct
-#endif
-
-typedef struct _UM_DEVICE_BLOCK {
- LM_DEVICE_BLOCK lm_dev;
- struct net_device *dev;
- struct pci_dev *pdev;
- struct net_device *next_module;
- char *name;
-#ifdef BCM_PROC_FS
- struct proc_dir_entry *pfs_entry;
- char pfs_name[32];
-#endif
- void *mem_list[MAX_MEM];
- dma_addr_t dma_list[MAX_MEM];
- int mem_size_list[MAX_MEM];
- int mem_list_num;
-
- int index;
- int opened;
- int suspended;
- int using_dac; /* dual address cycle */
- int delayed_link_ind; /* Delay link status during initial load */
- int adapter_just_inited; /* the first few seconds after init. */
- int timer_interval;
- int statstimer_interval;
- int adaptive_expiry;
- int crc_counter_expiry;
- int poll_tbi_interval;
- int poll_tbi_expiry;
- int asf_heartbeat;
- int tx_full;
- int tx_queued;
- int line_speed; /* in Mbps, 0 if link is down */
- UM_RX_PACKET_Q rx_out_of_buf_q;
- int rx_out_of_buf;
- int rx_buf_repl_thresh;
- int rx_buf_repl_panic_thresh;
- int rx_buf_repl_isr_limit;
- int rx_buf_align;
- struct timer_list timer;
- struct timer_list statstimer;
- int do_global_lock;
- spinlock_t global_lock;
- spinlock_t undi_lock;
- spinlock_t phy_lock;
- unsigned long undi_flags;
- volatile unsigned long interrupt;
- atomic_t intr_sem;
- int tasklet_pending;
- volatile unsigned long tasklet_busy;
- struct tasklet_struct tasklet;
- struct net_device_stats stats;
- int intr_test;
- int intr_test_result;
-#ifdef NETIF_F_HW_VLAN_TX
- struct vlan_group *vlgrp;
-#endif
- int vlan_tag_mode; /* Setting to allow ASF to work properly with */
- /* VLANs */
- #define VLAN_TAG_MODE_AUTO_STRIP 0
- #define VLAN_TAG_MODE_NORMAL_STRIP 1
- #define VLAN_TAG_MODE_FORCED_STRIP 2
-
- /* Auto mode - VLAN TAGs are always stripped if ASF is enabled, */
- /* If ASF is not enabled, it will be in normal mode. */
- /* Normal mode - VLAN TAGs are stripped when VLANs are registered */
- /* Forced mode - VLAN TAGs are always stripped. */
-
- int adaptive_coalesce;
- uint rx_last_cnt;
- uint tx_last_cnt;
- uint rx_curr_coalesce_frames;
- uint rx_curr_coalesce_frames_intr;
- uint rx_curr_coalesce_ticks;
- uint tx_curr_coalesce_frames;
-#if TIGON3_DEBUG
- unsigned long tx_zc_count;
- unsigned long tx_chksum_count;
- unsigned long tx_himem_count;
- unsigned long rx_good_chksum_count;
-#endif
- unsigned long rx_bad_chksum_count;
-#ifdef BCM_TSO
- unsigned long tso_pkt_count;
-#endif
- unsigned long rx_misc_errors;
- uint64_t phy_crc_count;
- unsigned int spurious_int;
-
- void *sbh;
- unsigned long boardflags;
- void *robo;
- int qos;
-} UM_DEVICE_BLOCK, *PUM_DEVICE_BLOCK;
-
-typedef struct _UM_PACKET {
- LM_PACKET lm_packet;
- struct sk_buff *skbuff;
-#if MAX_SKB_FRAGS
- DECLARE_PCI_UNMAP_ADDR(map[MAX_SKB_FRAGS + 1])
- DECLARE_PCI_UNMAP_LEN(map_len[MAX_SKB_FRAGS + 1])
-#else
- DECLARE_PCI_UNMAP_ADDR(map[1])
- DECLARE_PCI_UNMAP_LEN(map_len[1])
-#endif
-} UM_PACKET, *PUM_PACKET;
-
-static inline void MM_SetAddr(LM_PHYSICAL_ADDRESS *paddr, dma_addr_t addr)
-{
-#if BITS_PER_LONG == 64
- paddr->High = ((unsigned long) addr) >> 32;
- paddr->Low = ((unsigned long) addr) & 0xffffffff;
-#else
- paddr->High = 0;
- paddr->Low = (unsigned long) addr;
-#endif
-}
-
-static inline void MM_SetT3Addr(T3_64BIT_HOST_ADDR *paddr, dma_addr_t addr)
-{
-#if BITS_PER_LONG == 64
- paddr->High = ((unsigned long) addr) >> 32;
- paddr->Low = ((unsigned long) addr) & 0xffffffff;
-#else
- paddr->High = 0;
- paddr->Low = (unsigned long) addr;
-#endif
-}
-
-#if MAX_SKB_FRAGS
-static inline void MM_SetT3AddrHigh(T3_64BIT_HOST_ADDR *paddr,
- dmaaddr_high_t addr)
-{
-#if defined(CONFIG_HIGHMEM64G) && defined(CONFIG_X86) && !defined(CONFIG_X86_64)
- paddr->High = (unsigned long) (addr >> 32);
- paddr->Low = (unsigned long) (addr & 0xffffffff);
-#else
- MM_SetT3Addr(paddr, (dma_addr_t) addr);
-#endif
-}
-#endif
-
-static inline void MM_MapRxDma(PLM_DEVICE_BLOCK pDevice,
- struct _LM_PACKET *pPacket,
- T3_64BIT_HOST_ADDR *paddr)
-{
- dma_addr_t map;
- struct sk_buff *skb = ((struct _UM_PACKET *) pPacket)->skbuff;
-
- map = pci_map_single(((struct _UM_DEVICE_BLOCK *)pDevice)->pdev,
- skb->tail,
- pPacket->u.Rx.RxBufferSize,
- PCI_DMA_FROMDEVICE);
- pci_unmap_addr_set(((struct _UM_PACKET *) pPacket), map[0], map);
- MM_SetT3Addr(paddr, map);
-}
-
-static inline void MM_MapTxDma(PLM_DEVICE_BLOCK pDevice,
- struct _LM_PACKET *pPacket,
- T3_64BIT_HOST_ADDR *paddr,
- LM_UINT32 *len,
- int frag)
-{
- dma_addr_t map;
- struct sk_buff *skb = ((struct _UM_PACKET *) pPacket)->skbuff;
- unsigned int length;
-
- if (frag == 0) {
-#if MAX_SKB_FRAGS
- if (skb_shinfo(skb)->nr_frags)
- length = skb->len - skb->data_len;
- else
-#endif
- length = skb->len;
- map = pci_map_single(((struct _UM_DEVICE_BLOCK *)pDevice)->pdev,
- skb->data, length, PCI_DMA_TODEVICE);
- MM_SetT3Addr(paddr, map);
- pci_unmap_addr_set(((struct _UM_PACKET *)pPacket), map[0], map);
- pci_unmap_len_set(((struct _UM_PACKET *) pPacket), map_len[0],
- length);
- *len = length;
- }
-#if MAX_SKB_FRAGS
- else {
- skb_frag_t *sk_frag;
- dmaaddr_high_t hi_map;
-
- sk_frag = &skb_shinfo(skb)->frags[frag - 1];
-
- hi_map = pci_map_page(
- ((struct _UM_DEVICE_BLOCK *)pDevice)->pdev,
- sk_frag->page,
- sk_frag->page_offset,
- sk_frag->size, PCI_DMA_TODEVICE);
-
- MM_SetT3AddrHigh(paddr, hi_map);
- pci_unmap_addr_set(((struct _UM_PACKET *) pPacket), map[frag],
- hi_map);
- pci_unmap_len_set(((struct _UM_PACKET *) pPacket),
- map_len[frag], sk_frag->size);
- *len = sk_frag->size;
- }
-#endif
-}
-
-#define BCM5700_PHY_LOCK(pUmDevice, flags) { \
- spinlock_t *lock; \
- if ((pUmDevice)->do_global_lock) { \
- lock = &(pUmDevice)->global_lock; \
- } \
- else { \
- lock = &(pUmDevice)->phy_lock; \
- } \
- spin_lock_irqsave(lock, flags); \
-}
-
-#define BCM5700_PHY_UNLOCK(pUmDevice, flags) { \
- spinlock_t *lock; \
- if ((pUmDevice)->do_global_lock) { \
- lock = &(pUmDevice)->global_lock; \
- } \
- else { \
- lock = &(pUmDevice)->phy_lock; \
- } \
- spin_unlock_irqrestore(lock, flags); \
-}
-
-
-#define MM_ACQUIRE_UNDI_LOCK(_pDevice) \
- if (!(((PUM_DEVICE_BLOCK)(_pDevice))->do_global_lock)) { \
- unsigned long flags; \
- spin_lock_irqsave(&((PUM_DEVICE_BLOCK)(_pDevice))->undi_lock, flags); \
- ((PUM_DEVICE_BLOCK)(_pDevice))->undi_flags = flags; \
- }
-
-#define MM_RELEASE_UNDI_LOCK(_pDevice) \
- if (!(((PUM_DEVICE_BLOCK)(_pDevice))->do_global_lock)) { \
- unsigned long flags = ((PUM_DEVICE_BLOCK) (_pDevice))->undi_flags; \
- spin_unlock_irqrestore(&((PUM_DEVICE_BLOCK)(_pDevice))->undi_lock, flags); \
- }
-
-#define MM_ACQUIRE_PHY_LOCK_IN_IRQ(_pDevice) \
- if (!(((PUM_DEVICE_BLOCK)(_pDevice))->do_global_lock)) { \
- spin_lock(&((PUM_DEVICE_BLOCK)(_pDevice))->phy_lock); \
- }
-
-#define MM_RELEASE_PHY_LOCK_IN_IRQ(_pDevice) \
- if (!(((PUM_DEVICE_BLOCK)(_pDevice))->do_global_lock)) { \
- spin_unlock(&((PUM_DEVICE_BLOCK)(_pDevice))->phy_lock); \
- }
-
-#define MM_UINT_PTR(_ptr) ((unsigned long) (_ptr))
-
-#define MM_GETSTATS64(_Ctr) \
- (uint64_t) (_Ctr).Low + ((uint64_t) (_Ctr).High << 32)
-
-#define MM_GETSTATS32(_Ctr) \
- (uint32_t) (_Ctr).Low
-
-#if BITS_PER_LONG == 64
-#define MM_GETSTATS(_Ctr) (unsigned long) MM_GETSTATS64(_Ctr)
-#else
-#define MM_GETSTATS(_Ctr) (unsigned long) MM_GETSTATS32(_Ctr)
-#endif
-
-#if (LINUX_VERSION_CODE >= 0x020600)
-#define mm_copy_to_user( to, from, size ) \
- (in_atomic() ? (memcpy((to),(from),(size)), 0) : copy_to_user((to),(from),(size)))
-#define mm_copy_from_user( to, from, size ) \
- (in_atomic() ? (memcpy((to),(from),(size)), 0) : copy_from_user((to),(from),(size)))
-#else
-#define mm_copy_to_user( to, from, size ) \
- copy_to_user((to),(from),(size) )
-#define mm_copy_from_user( to, from, size ) \
- copy_from_user((to),(from),(size))
-#endif
-
-#ifndef printf
-#define printf(fmt, args...) printk(KERN_WARNING fmt, ##args)
-#endif
-
-#define DbgPrint(fmt, arg...) printk(KERN_DEBUG fmt, ##arg)
-#if defined(CONFIG_X86)
-#define DbgBreakPoint() __asm__("int $129")
-#else
-#define DbgBreakPoint()
-#endif
-#define MM_Wait(time) udelay(time)
-
-#endif
+++ /dev/null
-/*
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Fundamental constants relating to IP Protocol
- *
- */
-
-#ifndef _bcmip_h_
-#define _bcmip_h_
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define PACKED __attribute__((packed))
-#else
-#pragma pack(1)
-#define PACKED
-#endif
-
-
-/* IPV4 and IPV6 common */
-#define IP_VER_OFFSET 0x0 /* offset to version field */
-#define IP_VER_MASK 0xf0 /* version mask */
-#define IP_VER_SHIFT 4 /* version shift */
-#define IP_VER_4 4 /* version number for IPV4 */
-#define IP_VER_6 6 /* version number for IPV6 */
-
-#define IP_VER(ip_body) \
- ((((uint8 *)(ip_body))[IP_VER_OFFSET] & IP_VER_MASK) >> IP_VER_SHIFT)
-
-#define IP_PROT_ICMP 0x1 /* ICMP protocol */
-#define IP_PROT_TCP 0x6 /* TCP protocol */
-#define IP_PROT_UDP 0x11 /* UDP protocol type */
-
-/* IPV4 field offsets */
-#define IPV4_VER_HL_OFFSET 0 /* version and ihl byte offset */
-#define IPV4_TOS_OFFSET 1 /* type of service offset */
-#define IPV4_PKTLEN_OFFSET 2 /* packet length offset */
-#define IPV4_PKTFLAG_OFFSET 6 /* more-frag,dont-frag flag offset */
-#define IPV4_PROT_OFFSET 9 /* protocol type offset */
-#define IPV4_CHKSUM_OFFSET 10 /* IP header checksum offset */
-#define IPV4_SRC_IP_OFFSET 12 /* src IP addr offset */
-#define IPV4_DEST_IP_OFFSET 16 /* dest IP addr offset */
-#define IPV4_OPTIONS_OFFSET 20 /* IP options offset */
-
-/* IPV4 field decodes */
-#define IPV4_VER_MASK 0xf0 /* IPV4 version mask */
-#define IPV4_VER_SHIFT 4 /* IPV4 version shift */
-
-#define IPV4_HLEN_MASK 0x0f /* IPV4 header length mask */
-#define IPV4_HLEN(ipv4_body) (4 * (((uint8 *)(ipv4_body))[IPV4_VER_HL_OFFSET] & IPV4_HLEN_MASK))
-
-#define IPV4_ADDR_LEN 4 /* IPV4 address length */
-
-#define IPV4_ADDR_NULL(a) ((((uint8 *)(a))[0] | ((uint8 *)(a))[1] | \
- ((uint8 *)(a))[2] | ((uint8 *)(a))[3]) == 0)
-
-#define IPV4_ADDR_BCAST(a) ((((uint8 *)(a))[0] & ((uint8 *)(a))[1] & \
- ((uint8 *)(a))[2] & ((uint8 *)(a))[3]) == 0xff)
-
-#define IPV4_TOS_DSCP_MASK 0xfc /* DiffServ codepoint mask */
-#define IPV4_TOS_DSCP_SHIFT 2 /* DiffServ codepoint shift */
-
-#define IPV4_TOS(ipv4_body) (((uint8 *)(ipv4_body))[IPV4_TOS_OFFSET])
-
-#define IPV4_TOS_PREC_MASK 0xe0 /* Historical precedence mask */
-#define IPV4_TOS_PREC_SHIFT 5 /* Historical precedence shift */
-
-#define IPV4_TOS_LOWDELAY 0x10 /* Lowest delay requested */
-#define IPV4_TOS_THROUGHPUT 0x8 /* Best throughput requested */
-#define IPV4_TOS_RELIABILITY 0x4 /* Most reliable delivery requested */
-
-#define IPV4_PROT(ipv4_body) (((uint8 *)(ipv4_body))[IPV4_PROT_OFFSET])
-
-#define IPV4_FRAG_RESV 0x8000 /* Reserved */
-#define IPV4_FRAG_DONT 0x4000 /* Don't fragment */
-#define IPV4_FRAG_MORE 0x2000 /* More fragments */
-#define IPV4_FRAG_OFFSET_MASK 0x1fff /* Fragment offset */
-
-#define IPV4_ADDR_STR_LEN 16 /* Max IP address length in string format */
-
-/* IPv4, no options only. */
-#define IPV4_NO_OPTIONS_HDR_LEN 20
-#define IPV4_NO_OPTIONS_PAYLOAD(ip_hdr) (&(((uint8 *)(ip_hdr))[IPV4_NO_OPTIONS_HDR_LEN]))
-
-#define IPV4_PAYLOAD_LEN(ip_body) \
- (((int)(((uint8 *)(ip_body))[IPV4_PKTLEN_OFFSET + 0]) << 8) | \
- ((uint8 *)(ip_body))[IPV4_PKTLEN_OFFSET + 1])
-
-/* IPV4 packet formats */
-struct ipv4_addr {
- uint8 addr[IPV4_ADDR_LEN];
-} PACKED;
-
-struct ipv4_hdr {
- uint8 version_ihl; /* Version and Internet Header Length */
- uint8 tos; /* Type Of Service */
- uint16 tot_len; /* Number of bytes in packet (max 65535) */
- uint16 id;
- uint16 frag; /* 3 flag bits and fragment offset */
- uint8 ttl; /* Time To Live */
- uint8 prot; /* Protocol */
- uint16 hdr_chksum; /* IP header checksum */
- uint8 src_ip[IPV4_ADDR_LEN]; /* Source IP Address */
- uint8 dst_ip[IPV4_ADDR_LEN]; /* Destination IP Address */
-} PACKED;
-
-/* IPV6 field offsets */
-#define IPV6_PAYLOAD_LEN_OFFSET 4 /* payload length offset */
-#define IPV6_NEXT_HDR_OFFSET 6 /* next header/protocol offset */
-#define IPV6_HOP_LIMIT_OFFSET 7 /* hop limit offset */
-#define IPV6_SRC_IP_OFFSET 8 /* src IP addr offset */
-#define IPV6_DEST_IP_OFFSET 24 /* dst IP addr offset */
-
-/* IPV6 field decodes */
-#define IPV6_TRAFFIC_CLASS(ipv6_body) \
- (((((uint8 *)(ipv6_body))[0] & 0x0f) << 4) | \
- ((((uint8 *)(ipv6_body))[1] & 0xf0) >> 4))
-
-#define IPV6_FLOW_LABEL(ipv6_body) \
- (((((uint8 *)(ipv6_body))[1] & 0x0f) << 16) | \
- (((uint8 *)(ipv6_body))[2] << 8) | \
- (((uint8 *)(ipv6_body))[3]))
-
-#define IPV6_PAYLOAD_LEN(ipv6_body) \
- ((((uint8 *)(ipv6_body))[IPV6_PAYLOAD_LEN_OFFSET + 0] << 8) | \
- ((uint8 *)(ipv6_body))[IPV6_PAYLOAD_LEN_OFFSET + 1])
-
-#define IPV6_NEXT_HDR(ipv6_body) \
- (((uint8 *)(ipv6_body))[IPV6_NEXT_HDR_OFFSET])
-
-#define IPV6_PROT(ipv6_body) IPV6_NEXT_HDR(ipv6_body)
-
-#define IPV6_ADDR_LEN 16 /* IPV6 address length */
-
-/* IPV4 TOS or IPV6 Traffic Classifier or 0 */
-#define IP_TOS(ip_body) \
- (IP_VER(ip_body) == IP_VER_4 ? IPV4_TOS(ip_body) : \
- IP_VER(ip_body) == IP_VER_6 ? IPV6_TRAFFIC_CLASS(ip_body) : 0)
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif
-
-#endif /* _bcmip_h_ */
+++ /dev/null
-/*
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- * Fundamental constants relating to TCP Protocol
- *
- */
-
-#ifndef _bcmtcp_h_
-#define _bcmtcp_h_
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define PACKED __attribute__((packed))
-#else
-#pragma pack(1)
-#define PACKED
-#endif
-
-#define TCP_SRC_PORT_OFFSET 0 /* TCP source port offset */
-#define TCP_DEST_PORT_OFFSET 2 /* TCP dest port offset */
-#define TCP_CHKSUM_OFFSET 16 /* TCP body checksum offset */
-
-/* These fields are stored in network order */
-struct bcmtcp_hdr
-{
- uint16 src_port; /* Source Port Address */
- uint16 dst_port; /* Destination Port Address */
- uint32 seq_num; /* TCP Sequence Number */
- uint32 ack_num; /* TCP Sequence Number */
- uint16 hdrlen_rsvd_flags; /* Header length, reserved bits and flags */
- uint16 tcpwin; /* TCP window */
- uint16 chksum; /* Segment checksum with pseudoheader */
- uint16 urg_ptr; /* Points to seq-num of byte following urg data */
-} PACKED;
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif
-
-/* Byte offset of flags in TCP header */
-#define TCP_FLAGS_OFFSET 13
-
-#define TCP_FLAGS_FIN 0x01
-#define TCP_FLAGS_SYN 0x02
-#define TCP_FLAGS_RST 0x03
-#define TCP_FLAGS_PSH 0x04
-#define TCP_FLAGS_ACK 0x10
-#define TCP_FLAGS_URG 0x20
-#define TCP_FLAGS_ECN 0x40
-#define TCP_FLAGS_CWR 0x80
-
-#define TCP_FLAGS(tcp_hdr) (((uint8 *)(tcp_hdr))[TCP_FLAGS_OFFSET])
-#define TCP_IS_ACK(tcp_hdr) (TCP_FLAGS(tcp_hdr) & TCP_FLAGS_ACK)
-
-#define TCP_SRC_PORT(tcp_hdr) (ntoh16(((struct bcmtcp_hdr*)(tcp_hdr))->src_port))
-#define TCP_DST_PORT(tcp_hdr) (ntoh16(((struct bcmtcp_hdr*)(tcp_hdr))->dst_port))
-#define TCP_SEQ_NUM(tcp_hdr) (ntoh32(((struct bcmtcp_hdr*)(tcp_hdr))->seq_num))
-#define TCP_ACK_NUM(tcp_hdr) (ntoh32(((struct bcmtcp_hdr*)(tcp_hdr))->ack_num))
-
-#endif /* #ifndef _bcmtcp_h_ */
+++ /dev/null
-/*
- * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */
-#define _NET_ETHERNET_H_
-
-#ifndef _TYPEDEFS_H_
-#include "typedefs.h"
-#endif
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define PACKED __attribute__((packed))
-#else
-#pragma pack(1)
-#define PACKED
-#endif
-
-/*
- * The number of bytes in an ethernet (MAC) address.
- */
-#define ETHER_ADDR_LEN 6
-
-/*
- * The number of bytes in the type field.
- */
-#define ETHER_TYPE_LEN 2
-
-/*
- * The number of bytes in the trailing CRC field.
- */
-#define ETHER_CRC_LEN 4
-
-/*
- * The length of the combined header.
- */
-#define ETHER_HDR_LEN (ETHER_ADDR_LEN * 2 + ETHER_TYPE_LEN)
-
-/*
- * The minimum packet length.
- */
-#define ETHER_MIN_LEN 64
-
-/*
- * The minimum packet user data length.
- */
-#define ETHER_MIN_DATA 46
-
-/*
- * The maximum packet length.
- */
-#define ETHER_MAX_LEN 1518
-
-/*
- * The maximum packet user data length.
- */
-#define ETHER_MAX_DATA 1500
-
-/* ether types */
-#define ETHER_TYPE_MIN 0x0600 /* Anything less than MIN is a length */
-#define ETHER_TYPE_IP 0x0800 /* IP */
-#define ETHER_TYPE_ARP 0x0806 /* ARP */
-#define ETHER_TYPE_8021Q 0x8100 /* 802.1Q */
-#define ETHER_TYPE_BRCM 0x886c /* Broadcom Corp. */
-#define ETHER_TYPE_802_1X 0x888e /* 802.1x */
-#ifdef BCMWPA2
-#define ETHER_TYPE_802_1X_PREAUTH 0x88c7 /* 802.1x preauthentication */
-#endif
-
-/* Broadcom subtype follows ethertype; First 2 bytes are reserved; Next 2 are subtype; */
-#define ETHER_BRCM_SUBTYPE_LEN 4 /* Broadcom 4 byte subtype */
-#define ETHER_BRCM_CRAM 0x1 /* Broadcom subtype cram protocol */
-
-/* ether header */
-#define ETHER_DEST_OFFSET (0 * ETHER_ADDR_LEN) /* dest address offset */
-#define ETHER_SRC_OFFSET (1 * ETHER_ADDR_LEN) /* src address offset */
-#define ETHER_TYPE_OFFSET (2 * ETHER_ADDR_LEN) /* ether type offset */
-
-/*
- * A macro to validate a length with
- */
-#define ETHER_IS_VALID_LEN(foo) \
- ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
-
-
-#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */
-/*
- * Structure of a 10Mb/s Ethernet header.
- */
-struct ether_header {
- uint8 ether_dhost[ETHER_ADDR_LEN];
- uint8 ether_shost[ETHER_ADDR_LEN];
- uint16 ether_type;
-} PACKED;
-
-/*
- * Structure of a 48-bit Ethernet address.
- */
-struct ether_addr {
- uint8 octet[ETHER_ADDR_LEN];
-} PACKED;
-#endif /* !__INCif_etherh Quick and ugly hack for VxWorks */
-
-/*
- * Takes a pointer, set, test, clear, toggle locally admininistered
- * address bit in the 48-bit Ethernet address.
- */
-#define ETHER_SET_LOCALADDR(ea) (((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] | 2))
-#define ETHER_IS_LOCALADDR(ea) (((uint8 *)(ea))[0] & 2)
-#define ETHER_CLR_LOCALADDR(ea) (((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] & 0xd))
-#define ETHER_TOGGLE_LOCALADDR(ea) (((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] ^ 2))
-
-/* Takes a pointer, marks unicast address bit in the MAC address */
-#define ETHER_SET_UNICAST(ea) (((uint8 *)(ea))[0] = (((uint8 *)(ea))[0] & ~1))
-
-/*
- * Takes a pointer, returns true if a 48-bit multicast address
- * (including broadcast, since it is all ones)
- */
-#define ETHER_ISMULTI(ea) (((const uint8 *)(ea))[0] & 1)
-
-
-/* compare two ethernet addresses - assumes the pointers can be referenced as shorts */
-#define ether_cmp(a, b) (!(((short*)a)[0] == ((short*)b)[0]) | \
- !(((short*)a)[1] == ((short*)b)[1]) | \
- !(((short*)a)[2] == ((short*)b)[2]))
-
-/* copy an ethernet address - assumes the pointers can be referenced as shorts */
-#define ether_copy(s, d) { \
- ((short*)d)[0] = ((short*)s)[0]; \
- ((short*)d)[1] = ((short*)s)[1]; \
- ((short*)d)[2] = ((short*)s)[2]; }
-
-/*
- * Takes a pointer, returns true if a 48-bit broadcast (all ones)
- */
-#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \
- ((uint8 *)(ea))[1] & \
- ((uint8 *)(ea))[2] & \
- ((uint8 *)(ea))[3] & \
- ((uint8 *)(ea))[4] & \
- ((uint8 *)(ea))[5]) == 0xff)
-
-static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
-static const struct ether_addr ether_null = {{0, 0, 0, 0, 0, 0}};
-
-/*
- * Takes a pointer, returns true if a 48-bit null address (all zeros)
- */
-#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \
- ((uint8 *)(ea))[1] | \
- ((uint8 *)(ea))[2] | \
- ((uint8 *)(ea))[3] | \
- ((uint8 *)(ea))[4] | \
- ((uint8 *)(ea))[5]) == 0)
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif
-
-#endif /* _NET_ETHERNET_H_ */
+++ /dev/null
-/*
- * 802.1Q VLAN protocol definitions
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _vlan_h_
-#define _vlan_h_
-
-/* enable structure packing */
-#if defined(__GNUC__)
-#define PACKED __attribute__((packed))
-#else
-#pragma pack(1)
-#define PACKED
-#endif
-
-#define VLAN_VID_MASK 0xfff /* low 12 bits are vlan id */
-#define VLAN_CFI_SHIFT 12 /* canonical format indicator bit */
-#define VLAN_PRI_SHIFT 13 /* user priority */
-
-#define VLAN_PRI_MASK 7 /* 3 bits of priority */
-
-#define VLAN_TAG_LEN 4
-#define VLAN_TAG_OFFSET (2 * ETHER_ADDR_LEN) /* offset in Ethernet II packet only */
-
-#define VLAN_TPID 0x8100 /* VLAN ethertype/Tag Protocol ID */
-
-struct ethervlan_header {
- uint8 ether_dhost[ETHER_ADDR_LEN];
- uint8 ether_shost[ETHER_ADDR_LEN];
- uint16 vlan_type; /* 0x8100 */
- uint16 vlan_tag; /* priority, cfi and vid */
- uint16 ether_type;
-};
-
-#define ETHERVLAN_HDR_LEN (ETHER_HDR_LEN + VLAN_TAG_LEN)
-
-#undef PACKED
-#if !defined(__GNUC__)
-#pragma pack()
-#endif
-
-#endif /* _vlan_h_ */
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* Queue functions. */
-/* void QQ_InitQueue(PQQ_CONTAINER pQueue) */
-/* char QQ_Full(PQQ_CONTAINER pQueue) */
-/* char QQ_Empty(PQQ_CONTAINER pQueue) */
-/* unsigned int QQ_GetSize(PQQ_CONTAINER pQueue) */
-/* unsigned int QQ_GetEntryCnt(PQQ_CONTAINER pQueue) */
-/* char QQ_PushHead(PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry) */
-/* char QQ_PushTail(PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry) */
-/* PQQ_ENTRY QQ_PopHead(PQQ_CONTAINER pQueue) */
-/* PQQ_ENTRY QQ_PopTail(PQQ_CONTAINER pQueue) */
-/* PQQ_ENTRY QQ_GetHead(PQQ_CONTAINER pQueue, unsigned int Idx) */
-/* PQQ_ENTRY QQ_GetTail(PQQ_CONTAINER pQueue, unsigned int Idx) */
-/* */
-/* */
-/* History: */
-/* 02/25/00 Hav Khauv Initial version. */
-/******************************************************************************/
-
-#ifndef BCM_QUEUE_H
-#define BCM_QUEUE_H
-
-
-
-/******************************************************************************/
-/* Queue definitions. */
-/******************************************************************************/
-
-/* Entry for queueing. */
-typedef void *PQQ_ENTRY;
-
-
-/* Queue header -- base type. */
-typedef struct {
- unsigned int Head;
- unsigned int Tail;
- unsigned int Size;
- MM_ATOMIC_T EntryCnt;
- PQQ_ENTRY Array[1];
-} QQ_CONTAINER, *PQQ_CONTAINER;
-
-
-/* Declare queue type macro. */
-#define DECLARE_QUEUE_TYPE(_QUEUE_TYPE, _QUEUE_SIZE) \
- \
- typedef struct { \
- QQ_CONTAINER Container; \
- PQQ_ENTRY EntryBuffer[_QUEUE_SIZE]; \
- } _QUEUE_TYPE, *P##_QUEUE_TYPE
-
-
-
-/******************************************************************************/
-/* Compilation switches. */
-/******************************************************************************/
-
-#if DBG
-#undef QQ_NO_OVERFLOW_CHECK
-#undef QQ_NO_UNDERFLOW_CHECK
-#endif /* DBG */
-
-#ifdef QQ_USE_MACROS
-/* notdone */
-#else
-
-#ifdef QQ_NO_INLINE
-#define __inline
-#endif /* QQ_NO_INLINE */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-__inline static void
-QQ_InitQueue(
-PQQ_CONTAINER pQueue,
-unsigned int QueueSize) {
- pQueue->Head = 0;
- pQueue->Tail = 0;
- pQueue->Size = QueueSize+1;
- MM_ATOMIC_SET(&pQueue->EntryCnt, 0);
-} /* QQ_InitQueue */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-__inline static char
-QQ_Full(
-PQQ_CONTAINER pQueue) {
- unsigned int NewHead;
-
- NewHead = (pQueue->Head + 1) % pQueue->Size;
-
- return(NewHead == pQueue->Tail);
-} /* QQ_Full */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-__inline static char
-QQ_Empty(
-PQQ_CONTAINER pQueue) {
- return(pQueue->Head == pQueue->Tail);
-} /* QQ_Empty */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-__inline static unsigned int
-QQ_GetSize(
-PQQ_CONTAINER pQueue) {
- return pQueue->Size;
-} /* QQ_GetSize */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-__inline static unsigned int
-QQ_GetEntryCnt(
-PQQ_CONTAINER pQueue) {
- return MM_ATOMIC_READ(&pQueue->EntryCnt);
-} /* QQ_GetEntryCnt */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/* TRUE entry was added successfully. */
-/* FALSE queue is full. */
-/******************************************************************************/
-__inline static char
-QQ_PushHead(
-PQQ_CONTAINER pQueue,
-PQQ_ENTRY pEntry) {
- unsigned int Head;
-
- Head = (pQueue->Head + 1) % pQueue->Size;
-
-#if !defined(QQ_NO_OVERFLOW_CHECK)
- if(Head == pQueue->Tail) {
- return 0;
- } /* if */
-#endif /* QQ_NO_OVERFLOW_CHECK */
-
- pQueue->Array[pQueue->Head] = pEntry;
- MM_WMB();
- pQueue->Head = Head;
- MM_ATOMIC_INC(&pQueue->EntryCnt);
-
- return -1;
-} /* QQ_PushHead */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/* TRUE entry was added successfully. */
-/* FALSE queue is full. */
-/******************************************************************************/
-__inline static char
-QQ_PushTail(
-PQQ_CONTAINER pQueue,
-PQQ_ENTRY pEntry) {
- unsigned int Tail;
-
- Tail = pQueue->Tail;
- if(Tail == 0) {
- Tail = pQueue->Size;
- } /* if */
- Tail--;
-
-#if !defined(QQ_NO_OVERFLOW_CHECK)
- if(Tail == pQueue->Head) {
- return 0;
- } /* if */
-#endif /* QQ_NO_OVERFLOW_CHECK */
-
- pQueue->Array[Tail] = pEntry;
- MM_WMB();
- pQueue->Tail = Tail;
- MM_ATOMIC_INC(&pQueue->EntryCnt);
-
- return -1;
-} /* QQ_PushTail */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-__inline static PQQ_ENTRY
-QQ_PopHead(
-PQQ_CONTAINER pQueue) {
- unsigned int Head;
- unsigned int Tail;
- PQQ_ENTRY Entry;
-
- Head = pQueue->Head;
- Tail = pQueue->Tail;
-
- MM_MB();
-#if !defined(QQ_NO_UNDERFLOW_CHECK)
- if(Head == Tail) {
- return (PQQ_ENTRY) 0;
- } /* if */
-#endif /* QQ_NO_UNDERFLOW_CHECK */
-
- if(Head == 0) {
- Head = pQueue->Size;
- } /* if */
- Head--;
-
- Entry = pQueue->Array[Head];
- MM_MB();
- pQueue->Head = Head;
- MM_ATOMIC_DEC(&pQueue->EntryCnt);
-
- return Entry;
-} /* QQ_PopHead */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-__inline static PQQ_ENTRY
-QQ_PopTail(
-PQQ_CONTAINER pQueue) {
- unsigned int Head;
- unsigned int Tail;
- PQQ_ENTRY Entry;
-
- Head = pQueue->Head;
- Tail = pQueue->Tail;
-
- MM_MB();
-#if !defined(QQ_NO_UNDERFLOW_CHECK)
- if(Tail == Head) {
- return (PQQ_ENTRY) 0;
- } /* if */
-#endif /* QQ_NO_UNDERFLOW_CHECK */
-
- Entry = pQueue->Array[Tail];
- MM_MB();
- pQueue->Tail = (Tail + 1) % pQueue->Size;
- MM_ATOMIC_DEC(&pQueue->EntryCnt);
-
- return Entry;
-} /* QQ_PopTail */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-__inline static PQQ_ENTRY
-QQ_GetHead(
- PQQ_CONTAINER pQueue,
- unsigned int Idx)
-{
- if(Idx >= (unsigned int) MM_ATOMIC_READ(&pQueue->EntryCnt))
- {
- return (PQQ_ENTRY) 0;
- }
-
- if(pQueue->Head > Idx)
- {
- Idx = pQueue->Head - Idx;
- }
- else
- {
- Idx = pQueue->Size - (Idx - pQueue->Head);
- }
- Idx--;
-
- return pQueue->Array[Idx];
-}
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-__inline static PQQ_ENTRY
-QQ_GetTail(
- PQQ_CONTAINER pQueue,
- unsigned int Idx)
-{
- if(Idx >= (unsigned int) MM_ATOMIC_READ(&pQueue->EntryCnt))
- {
- return (PQQ_ENTRY) 0;
- }
-
- Idx += pQueue->Tail;
- if(Idx >= pQueue->Size)
- {
- Idx = Idx - pQueue->Size;
- }
-
- return pQueue->Array[Idx];
-}
-
-#endif /* QQ_USE_MACROS */
-
-
-
-#endif /* QUEUE_H */
+++ /dev/null
-
-#if 1
-#define DEBUG_REG printk
-#else
-#define DEBUG_REG
-#endif
-
-void ReadDataFromRegister(robo_info_t *robo, uint16 page_num,uint16 addr_num, uint16 len, void* data)
-{
-
- uint32 val32 = 0,val64[2];
- uint16 val16 =0,val48[3];//,val32[2],val64[4];
- memset(val48,0,6);
- memset(val64,0,8);
- //memset(val32,0,4);
- DEBUG_REG("Read ioctl Page[0x%02x] Addr[0x%02x] len[%d].\n", page_num, addr_num, len);
- switch (len)
- {
- case 1:
- case 2:
- {
- robo->ops->read_reg(robo, page_num, addr_num, &val16, len);
- DEBUG_REG("IRead 8/16 bit Page[0x%02x]addr[0x%02x]len[%d]val[0x%04x].\n",
- page_num, addr_num, len, val16);
- memcpy(data,&val16,2);
- break;
- }
- case 4:
- {
- robo->ops->read_reg(robo, page_num, addr_num, &val32, len);
- DEBUG_REG("IRead 32bit Page[0x%02x]addr[0x%02x]len[%d]val[0x%08x].\n",
- page_num, addr_num, len, val32);
- memcpy(data,&val32,4);
- break;
- }
- case 6:
- {
- robo->ops->read_reg(robo, page_num,addr_num, &val48, len);
- DEBUG_REG("IRead 48bit Page[0x%02x]addr[0x%02x]len[%d]val[0x%04x-0x%04x-0x%04x].\n",
- page_num, addr_num, len, val48[0], val48[1], val48[2]);
- memcpy(data,&val48,6);
- break;
- }
- case 8:
- {
- robo->ops->read_reg(robo, page_num, addr_num, &val64, len);
- DEBUG_REG("IRead 64bit Page[0x%02x]addr[0x%02x]len[%d]val[0x%08x-0x%08x].\n",
- page_num, addr_num, len, val64[0], val64[1]);
- memcpy(data,&val64,8);
- break;
- }
- }
-}
-
-
-
-void WriteDataToRegister(robo_info_t *robo,uint16 page_num,uint16 addr_num, uint16 len, void* data)
-{
- DEBUG_REG("Write ioctl Page[0x%02x]Addr[0x%02x]len[%d].\n",page_num,addr_num,len);
- switch (len)
- {
- case 1:
- case 2:
- {
- DEBUG_REG("Write 2byte Page[0x%02x]addr[0x%02x]len[%d]val[0x%04x].\n",
- page_num, addr_num, len, *((uint16 *)data));
- robo->ops->write_reg(robo, page_num, addr_num, data, len);
- if (page_num < 0x10 || page_num > 0x17) {
- robo->ops->read_reg(robo, page_num, addr_num, data, len);
- DEBUG_REG("Reload Page[0x%02x]addr[0x%02x]len[%d]val[0x%04x].\n",
- page_num, addr_num, len, *((uint16 *)data));
- }
- break;
- }
- case 4:
- {
- DEBUG_REG("Write 4byte Page[0x%02x]addr[0x%02x]len[%d]val[0x%08x].\n",
- page_num, addr_num, len, *((uint32 *)data));
- robo->ops->write_reg(robo, page_num, addr_num, data, len);
- if (page_num < 0x10 || page_num > 0x17) {
- robo->ops->read_reg(robo, page_num, addr_num, data, len);
- DEBUG_REG("Reload Page[0x%02x]addr[0x%02x]len[%d]val[0x%08x].\n",
- page_num, addr_num, len, *((uint32 *)data));
- }
- break;
- }
- case 6:
- {
- DEBUG_REG("Write 6byte Page[0x%02x]addr[0x%02x]len[%d]val[0x%04x-0x%04x-0x%04x].\n",
- page_num, addr_num, len, *((uint16 *)data),*((((uint16 *)data)+1)),
- *(((uint16 *)data)+2));
- robo->ops->write_reg(robo, page_num, addr_num, data, len);
- robo->ops->read_reg(robo, page_num, addr_num, data, len);
- DEBUG_REG("Reload Page[0x%02x]addr[0x%02x]len[%d]val[0x%04x-0x%04x-0x%04x].\n",
- page_num, addr_num, len,*((uint16 *)data),*((((uint16 *)data)+1)),
- *(((uint16 *)data)+2));
- break;
- }
- case 8:
- {
- DEBUG_REG("Write 8byte Page[0x%02x]addr[0x%02x]len[%d]val[0x%08x-0x%08x].\n",
- page_num, addr_num, len, *((uint32*)data),*(((uint32 *)data)+1));
- robo->ops->write_reg(robo, page_num, addr_num, data, len);
- robo->ops->read_reg(robo, page_num, addr_num, data, len);
- DEBUG_REG("Reload Page[0x%x]addr[0x%x]len[%d]val[0x%08x-0x%08x].\n",
- page_num, addr_num, len,*((uint32 *)data), *(((uint32 *)data)+1));
- break;
- }
- }
-}
-
+++ /dev/null
-/*
- * HND SiliconBackplane Gigabit Ethernet core registers
- *
- * Copyright 2007, Broadcom Corporation
- * All Rights Reserved.
- *
- * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
- * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
- * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
- * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
- *
- */
-
-#ifndef _sbgige_h_
-#define _sbgige_h_
-
-#include <typedefs.h>
-#include <sbconfig.h>
-#include <pcicfg.h>
-
-/* cpp contortions to concatenate w/arg prescan */
-#ifndef PAD
-#define _PADLINE(line) pad ## line
-#define _XSTR(line) _PADLINE(line)
-#define PAD _XSTR(__LINE__)
-#endif /* PAD */
-
-/* PCI to OCP shim registers */
-typedef volatile struct {
- uint32 FlushStatusControl;
- uint32 FlushReadAddr;
- uint32 FlushTimeoutCntr;
- uint32 BarrierReg;
- uint32 MaocpSIControl;
- uint32 SiocpMaControl;
- uint8 PAD[0x02E8];
-} sbgige_pcishim_t;
-
-/* SB core registers */
-typedef volatile struct {
- /* PCI I/O Read/Write registers */
- uint8 pciio[0x0400];
-
- /* Reserved */
- uint8 reserved[0x0400];
-
- /* PCI configuration registers */
- pci_config_regs pcicfg;
- uint8 PAD[0x0300];
-
- /* PCI to OCP shim registers */
- sbgige_pcishim_t pcishim;
-
- /* Sonics SiliconBackplane registers */
- sbconfig_t sbconfig;
-} sbgige_t;
-
-#endif /* _sbgige_h_ */
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2002 - 2004 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* History: */
-/* */
-/******************************************************************************/
-
-#include "mm.h"
-
-#ifdef INCLUDE_TCP_SEG_SUPPORT
-#include "fw_stkoffld.h"
-#include "fw_lso05.h"
-
-LM_UINT32 LM_GetStkOffLdFirmwareSize(PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 FwSize;
-
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5750)
- {
- return 0;
- }
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705)
- {
- FwSize = (LM_UINT32)(t3StkOffLd05FwTextLen +
- t3StkOffLd05FwRodataLen +
- t3StkOffLd05FwDataLen +
- t3StkOffLd05FwSbssLen +
- t3StkOffLd05FwBssLen);
- }
- else
- {
- FwSize = (LM_UINT32)(t3StkOffLdFwTextLen +
- t3StkOffLdFwRodataLen +
- t3StkOffLdFwDataLen +
- t3StkOffLdFwSbssLen +
- t3StkOffLdFwBssLen);
- }
-
- return FwSize;
-}
-
-LM_STATUS LM_LoadStkOffLdFirmware(PLM_DEVICE_BLOCK pDevice)
-{
- T3_FWIMG_INFO FwImgInfo;
- LM_UINT32 Cpu;
-
- if (T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- return LM_STATUS_SUCCESS;
- }
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705)
- {
- FwImgInfo.StartAddress = t3StkOffLd05FwStartAddr;
- FwImgInfo.Text.Buffer = (PLM_UINT8)t3StkOffLd05FwText;
- FwImgInfo.Text.Offset = t3StkOffLd05FwTextAddr;
- FwImgInfo.Text.Length = t3StkOffLd05FwTextLen;
- FwImgInfo.ROnlyData.Buffer = (PLM_UINT8)t3StkOffLd05FwRodata;
- FwImgInfo.ROnlyData.Offset = t3StkOffLd05FwRodataAddr;
- FwImgInfo.ROnlyData.Length = t3StkOffLd05FwRodataLen;
- FwImgInfo.Data.Buffer = (PLM_UINT8)t3StkOffLd05FwData;
- FwImgInfo.Data.Offset = t3StkOffLd05FwDataAddr;
- FwImgInfo.Data.Length = t3StkOffLd05FwDataLen;
- FwImgInfo.Sbss.Offset = t3StkOffLd05FwSbssAddr;
- FwImgInfo.Sbss.Length = t3StkOffLd05FwSbssLen;
- FwImgInfo.Bss.Offset = t3StkOffLd05FwBssAddr;
- FwImgInfo.Bss.Length = t3StkOffLd05FwBssLen;
- Cpu = T3_RX_CPU_ID;
- }
- else
- {
- FwImgInfo.StartAddress = t3StkOffLdFwStartAddr;
- FwImgInfo.Text.Buffer = (PLM_UINT8)t3StkOffLdFwText;
- FwImgInfo.Text.Offset = t3StkOffLdFwTextAddr;
- FwImgInfo.Text.Length = t3StkOffLdFwTextLen;
- FwImgInfo.ROnlyData.Buffer = (PLM_UINT8)t3StkOffLdFwRodata;
- FwImgInfo.ROnlyData.Offset = t3StkOffLdFwRodataAddr;
- FwImgInfo.ROnlyData.Length = t3StkOffLdFwRodataLen;
- FwImgInfo.Data.Buffer = (PLM_UINT8)t3StkOffLdFwData;
- FwImgInfo.Data.Offset = t3StkOffLdFwDataAddr;
- FwImgInfo.Data.Length = t3StkOffLdFwDataLen;
- FwImgInfo.Sbss.Offset = t3StkOffLdFwSbssAddr;
- FwImgInfo.Sbss.Length = t3StkOffLdFwSbssLen;
- FwImgInfo.Bss.Offset = t3StkOffLdFwBssAddr;
- FwImgInfo.Bss.Length = t3StkOffLdFwBssLen;
- Cpu = T3_TX_CPU_ID;
- }
-
- if (LM_LoadFirmware(pDevice,
- &FwImgInfo,
- Cpu,
- Cpu) != LM_STATUS_SUCCESS)
- {
- return LM_STATUS_FAILURE;
- }
-
- return LM_STATUS_SUCCESS;
-}
-
-#endif /* INCLUDE_TCP_SEG_SUPPORT */
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2005 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* History: */
-/******************************************************************************/
-
-
-#include "mm.h"
-#include "typedefs.h"
-#include "osl.h"
-#include "bcmdefs.h"
-#include "bcmdevs.h"
-#include "sbutils.h"
-#include "bcmrobo.h"
-#include "proto/ethernet.h"
-
-/******************************************************************************/
-/* Local functions. */
-/******************************************************************************/
-
-LM_STATUS LM_Abort(PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_QueueRxPackets(PLM_DEVICE_BLOCK pDevice);
-
-static LM_STATUS LM_InitBcm540xPhy(PLM_DEVICE_BLOCK pDevice);
-static LM_VOID LM_PhyTapPowerMgmt(LM_DEVICE_BLOCK *pDevice);
-
-LM_VOID LM_ServiceRxInterrupt(PLM_DEVICE_BLOCK pDevice);
-LM_VOID LM_ServiceTxInterrupt(PLM_DEVICE_BLOCK pDevice);
-
-static LM_STATUS LM_ForceAutoNeg(PLM_DEVICE_BLOCK pDevice);
-static LM_UINT32 GetPhyAdFlowCntrlSettings(PLM_DEVICE_BLOCK pDevice);
-STATIC LM_STATUS LM_SetFlowControl(PLM_DEVICE_BLOCK pDevice,
- LM_UINT32 LocalPhyAd, LM_UINT32 RemotePhyAd);
-#ifdef INCLUDE_TBI_SUPPORT
-STATIC LM_STATUS LM_SetupFiberPhy(PLM_DEVICE_BLOCK pDevice);
-STATIC LM_STATUS LM_InitBcm800xPhy(PLM_DEVICE_BLOCK pDevice);
-#endif
-STATIC LM_STATUS LM_SetupCopperPhy(PLM_DEVICE_BLOCK pDevice);
-STATIC LM_VOID LM_SetEthWireSpeed(LM_DEVICE_BLOCK *pDevice);
-STATIC LM_STATUS LM_PhyAdvertiseAll(LM_DEVICE_BLOCK *pDevice);
-STATIC PLM_ADAPTER_INFO LM_GetAdapterInfoBySsid(LM_UINT16 Svid, LM_UINT16 Ssid);
-LM_VOID LM_SwitchVaux(PLM_DEVICE_BLOCK pDevice, PLM_DEVICE_BLOCK pDevice2);
-STATIC LM_STATUS LM_DmaTest(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt,
- LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize);
-STATIC LM_STATUS LM_DisableChip(PLM_DEVICE_BLOCK pDevice);
-STATIC LM_STATUS LM_ResetChip(PLM_DEVICE_BLOCK pDevice);
-STATIC LM_STATUS LM_DisableFW(PLM_DEVICE_BLOCK pDevice);
-STATIC LM_STATUS LM_Test4GBoundary(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket,
- PT3_SND_BD pSendBd);
-STATIC LM_VOID LM_WritePreResetSignatures(LM_DEVICE_BLOCK *pDevice,
- LM_RESET_TYPE Mode);
-STATIC LM_VOID LM_WritePostResetSignatures(LM_DEVICE_BLOCK *pDevice,
- LM_RESET_TYPE Mode);
-STATIC LM_VOID LM_WriteLegacySignatures(LM_DEVICE_BLOCK *pDevice,
- LM_RESET_TYPE Mode);
-STATIC void LM_GetPhyId(LM_DEVICE_BLOCK *pDevice);
-
-/******************************************************************************/
-/* External functions. */
-/******************************************************************************/
-
-LM_STATUS LM_LoadRlsFirmware(PLM_DEVICE_BLOCK pDevice);
-#ifdef INCLUDE_TCP_SEG_SUPPORT
-LM_STATUS LM_LoadStkOffLdFirmware(PLM_DEVICE_BLOCK pDevice);
-LM_UINT32 LM_GetStkOffLdFirmwareSize(PLM_DEVICE_BLOCK pDevice);
-#endif
-
-LM_UINT32
-LM_RegRd(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register)
-{
-#ifdef PCIX_TARGET_WORKAROUND
- if (pDevice->Flags & UNDI_FIX_FLAG)
- {
- return (LM_RegRdInd(pDevice, Register));
- }
- else
-#endif
- {
- return (REG_RD_OFFSET(pDevice, Register));
- }
-}
-
-/* Mainly used to flush posted write before delaying */
-LM_VOID
-LM_RegRdBack(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register)
-{
- LM_UINT32 dummy;
-
-#ifdef PCIX_TARGET_WORKAROUND
- if (pDevice->Flags & ENABLE_PCIX_FIX_FLAG)
- {
- return;
- }
- else
-#endif
- {
- if (pDevice->Flags & REG_RD_BACK_FLAG)
- return;
-
- dummy = REG_RD_OFFSET(pDevice, Register);
- }
-}
-
-LM_VOID
-LM_RegWr(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register, LM_UINT32 Value32,
- LM_UINT32 ReadBack)
-{
-#ifdef PCIX_TARGET_WORKAROUND
- if (pDevice->Flags & ENABLE_PCIX_FIX_FLAG)
- {
- LM_RegWrInd(pDevice, Register, Value32);
- }
- else
-#endif
- {
- LM_UINT32 dummy;
-
- REG_WR_OFFSET(pDevice, Register, Value32);
- if (ReadBack && (pDevice->Flags & REG_RD_BACK_FLAG))
- {
- dummy = REG_RD_OFFSET(pDevice, Register);
- }
- }
-}
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_UINT32
-LM_RegRdInd(
-PLM_DEVICE_BLOCK pDevice,
-LM_UINT32 Register) {
- LM_UINT32 Value32;
-
- MM_ACQUIRE_UNDI_LOCK(pDevice);
- MM_WriteConfig32(pDevice, T3_PCI_REG_ADDR_REG, Register);
- MM_ReadConfig32(pDevice, T3_PCI_REG_DATA_REG, &Value32);
- MM_RELEASE_UNDI_LOCK(pDevice);
-
- return MM_SWAP_LE32(Value32);
-} /* LM_RegRdInd */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_VOID
-LM_RegWrInd(
-PLM_DEVICE_BLOCK pDevice,
-LM_UINT32 Register,
-LM_UINT32 Value32) {
-
- MM_ACQUIRE_UNDI_LOCK(pDevice);
- MM_WriteConfig32(pDevice, T3_PCI_REG_ADDR_REG, Register);
- MM_WriteConfig32(pDevice, T3_PCI_REG_DATA_REG, MM_SWAP_LE32(Value32));
- MM_RELEASE_UNDI_LOCK(pDevice);
-} /* LM_RegWrInd */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_UINT32
-LM_MemRdInd(
-PLM_DEVICE_BLOCK pDevice,
-LM_UINT32 MemAddr) {
- LM_UINT32 Value32;
-
- MM_ACQUIRE_UNDI_LOCK(pDevice);
- MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr);
- MM_ReadConfig32(pDevice, T3_PCI_MEM_WIN_DATA_REG, &Value32);
- MM_RELEASE_UNDI_LOCK(pDevice);
-
- return MM_SWAP_LE32(Value32);
-} /* LM_MemRdInd */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_VOID
-LM_MemWrInd(
-PLM_DEVICE_BLOCK pDevice,
-LM_UINT32 MemAddr,
-LM_UINT32 Value32) {
- MM_ACQUIRE_UNDI_LOCK(pDevice);
- MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr);
- MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_DATA_REG, MM_SWAP_LE32(Value32));
- MM_RELEASE_UNDI_LOCK(pDevice);
-} /* LM_MemWrInd */
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS
-LM_QueueRxPackets(
-PLM_DEVICE_BLOCK pDevice) {
- LM_STATUS Lmstatus;
- PLM_PACKET pPacket;
- PT3_RCV_BD pRcvBd = 0;
- LM_UINT32 StdBdAdded = 0;
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- LM_UINT32 JumboBdAdded = 0;
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
- LM_UINT32 ConIdx, Idx;
- LM_UINT32 Diff = 0;
-
- Lmstatus = LM_STATUS_SUCCESS;
-
- if (pDevice->Flags & RX_BD_LIMIT_64_FLAG)
- {
- ConIdx = pDevice->pStatusBlkVirt->RcvStdConIdx;
- Diff = (pDevice->RxStdProdIdx - ConIdx) &
- T3_STD_RCV_RCB_ENTRY_COUNT_MASK;
- if (Diff >= 56)
- {
- if (QQ_GetEntryCnt(&pDevice->RxPacketFreeQ.Container))
- {
- pDevice->QueueAgain = TRUE;
- }
- return LM_STATUS_SUCCESS;
- }
- }
-
- pDevice->QueueAgain = FALSE;
-
- pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
- while(pPacket) {
- switch(pPacket->u.Rx.RcvProdRing) {
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- case T3_JUMBO_RCV_PROD_RING: /* Jumbo Receive Ring. */
- /* Initialize the buffer descriptor. */
- Idx = pDevice->RxJumboProdIdx;
- pRcvBd = &pDevice->pRxJumboBdVirt[Idx];
-
- pPacket->u.Rx.RcvRingProdIdx = Idx;
- pDevice->RxJumboRing[Idx] = pPacket;
- /* Update the producer index. */
- pDevice->RxJumboProdIdx = (Idx + 1) &
- T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK;
-
- JumboBdAdded++;
- break;
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
- case T3_STD_RCV_PROD_RING: /* Standard Receive Ring. */
- /* Initialize the buffer descriptor. */
- Idx = pDevice->RxStdProdIdx;
- pRcvBd = &pDevice->pRxStdBdVirt[Idx];
-
- pPacket->u.Rx.RcvRingProdIdx = Idx;
- pDevice->RxStdRing[Idx] = pPacket;
- /* Update the producer index. */
- pDevice->RxStdProdIdx = (Idx + 1) &
- T3_STD_RCV_RCB_ENTRY_COUNT_MASK;
-
- StdBdAdded++;
- break;
-
- case T3_UNKNOWN_RCV_PROD_RING:
- default:
- Lmstatus = LM_STATUS_FAILURE;
- break;
- } /* switch */
-
- /* Bail out if there is any error. */
- if(Lmstatus != LM_STATUS_SUCCESS)
- {
- break;
- }
-
- /* Initialize the receive buffer pointer */
- MM_MapRxDma(pDevice, pPacket, &pRcvBd->HostAddr);
-
- /* The opaque field may point to an offset from a fix addr. */
- pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR(pPacket) -
- MM_UINT_PTR(pDevice->pPacketDescBase));
-
- if ((pDevice->Flags & RX_BD_LIMIT_64_FLAG) &&
- ((Diff + StdBdAdded) >= 63))
- {
- if (QQ_GetEntryCnt(&pDevice->RxPacketFreeQ.Container))
- {
- pDevice->QueueAgain = TRUE;
- }
- break;
- }
- pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
- } /* while */
-
- MM_WMB();
- /* Update the procedure index. */
- if(StdBdAdded)
- {
- MB_REG_WR(pDevice, Mailbox.RcvStdProdIdx.Low,
- pDevice->RxStdProdIdx);
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- {
- MB_REG_RD(pDevice, Mailbox.RcvStdProdIdx.Low);
- }
- }
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- if(JumboBdAdded)
- {
- MB_REG_WR(pDevice, Mailbox.RcvJumboProdIdx.Low,
- pDevice->RxJumboProdIdx);
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- {
- MB_REG_RD(pDevice, Mailbox.RcvJumboProdIdx.Low);
- }
- }
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
- return Lmstatus;
-} /* LM_QueueRxPackets */
-
-
-
-
-#define EEPROM_CMD_TIMEOUT 100000
-#define NVRAM_CMD_TIMEOUT 100000
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS LM_NVRAM_AcquireLock( PLM_DEVICE_BLOCK pDevice )
-{
- LM_UINT i;
- LM_UINT32 value32;
- LM_STATUS status;
-
- status = LM_STATUS_SUCCESS;
-
- /* BCM4785: Avoid all access to NVRAM & EEPROM. */
- if (pDevice->Flags & SB_CORE_FLAG)
- return status;
-
- /* Request access to the flash interface. */
- REG_WR( pDevice, Nvram.SwArb, SW_ARB_REQ_SET1 );
-
- /*
- * The worst case wait time for Nvram arbitration
- * using serial eprom is about 45 msec on a 5704
- * with the other channel loading boot code.
- */
- for( i = 0; i < NVRAM_CMD_TIMEOUT; i++ )
- {
- value32 = REG_RD( pDevice, Nvram.SwArb );
- if( value32 & SW_ARB_GNT1 )
- {
- break;
- }
- MM_Wait(20);
- }
-
-
- return status;
-} /* LM_NVRAM_AcquireLock */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS LM_NVRAM_ReleaseLock( PLM_DEVICE_BLOCK pDevice )
-{
- /* BCM4785: Avoid all access to NVRAM & EEPROM. */
- if (pDevice->Flags & SB_CORE_FLAG)
- return LM_STATUS_SUCCESS;
-
- /* Relinquish nvram interface. */
- REG_WR( pDevice, Nvram.SwArb, SW_ARB_REQ_CLR1 );
- REG_RD_BACK( pDevice, Nvram.SwArb );
-
- return LM_STATUS_SUCCESS;
-} /* LM_NVRAM_ReleaseLock */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_EEPROM_ExecuteCommand( PLM_DEVICE_BLOCK pDevice, LM_UINT32 cmd )
-{
- LM_UINT32 i;
- LM_UINT32 value32;
- LM_STATUS status;
-
- status = LM_STATUS_SUCCESS;
-
- REG_WR( pDevice, Grc.EepromAddr, cmd );
-
- for( i = 0; i < EEPROM_CMD_TIMEOUT; i++ )
- {
- value32 = REG_RD( pDevice, Grc.EepromAddr );
- if( value32 & SEEPROM_ADDR_COMPLETE )
- {
- break;
- }
- MM_Wait(20);
- }
-
- if( i == EEPROM_CMD_TIMEOUT )
- {
- B57_ERR(("EEPROM command (0x%x) timed out!\n", cmd));
- status = LM_STATUS_FAILURE;
- }
-
- return status;
-} /* LM_EEPROM_ExecuteCommand */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_NVRAM_ExecuteCommand( PLM_DEVICE_BLOCK pDevice, LM_UINT32 cmd )
-{
- LM_UINT32 i;
- LM_UINT32 value32;
- LM_STATUS status;
-
- status = LM_STATUS_SUCCESS;
-
- REG_WR( pDevice, Nvram.Cmd, cmd );
- REG_RD_BACK( pDevice, Nvram.Cmd );
- MM_Wait(10);
-
- /* Wait for the command to complete. */
- for( i = 0; i < NVRAM_CMD_TIMEOUT; i++ )
- {
- value32 = REG_RD( pDevice, Nvram.Cmd );
- if( value32 & NVRAM_CMD_DONE )
- {
- break;
- }
- MM_Wait(1);
- }
-
- if( i == NVRAM_CMD_TIMEOUT )
- {
- B57_ERR(("NVRAM command (0x%x) timed out!\n", cmd));
- status = LM_STATUS_FAILURE;
- }
-
- return status;
-} /* LM_NVRAM_ExecuteCommand */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_EEPROM_Read_UINT32( PLM_DEVICE_BLOCK pDevice, LM_UINT32 offset,
- LM_UINT32 * data )
-{
- LM_UINT32 value32;
- LM_UINT32 Addr;
- LM_UINT32 Dev;
- LM_STATUS status;
-
- Dev = offset / pDevice->flashinfo.chipsize;
- Addr = offset % pDevice->flashinfo.chipsize;
-
- value32 = REG_RD( pDevice, Grc.EepromAddr );
- value32 &= ~(SEEPROM_ADDR_DEV_ID_MASK | SEEPROM_ADDR_ADDRESS_MASK |
- SEEPROM_ADDR_RW_MASK);
- value32 |= SEEPROM_ADDR_DEV_ID(Dev) | SEEPROM_ADDR_ADDRESS(Addr) |
- SEEPROM_ADDR_START | SEEPROM_ADDR_READ;
-
- status = LM_EEPROM_ExecuteCommand( pDevice, value32 );
- if( status == LM_STATUS_SUCCESS )
- {
- value32 = REG_RD( pDevice, Grc.EepromData );
-
- /* The endianess of the eeprom and flash interface is different */
- *data = MM_SWAP_LE32( value32 );
- }
-
- return status;
-} /* LM_EEPROM_Read_UINT32 */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_NVRAM_Read_UINT32( PLM_DEVICE_BLOCK pDevice, LM_UINT32 offset,
- LM_UINT32 * data )
-{
- LM_UINT32 physaddr;
- LM_UINT32 ctrlreg;
- LM_UINT32 value32;
- LM_STATUS status;
-
- if( pDevice->flashinfo.jedecnum == JEDEC_ATMEL &&
- pDevice->flashinfo.buffered == TRUE )
- {
- /*
- * One supported flash part has 9 address bits to address a
- * particular page and another 9 address bits to address a
- * particular byte within that page.
- */
- LM_UINT32 pagenmbr;
-
- pagenmbr = offset / pDevice->flashinfo.pagesize;
- pagenmbr = pagenmbr << ATMEL_AT45DB0X1B_PAGE_POS;
-
- physaddr = pagenmbr + (offset % pDevice->flashinfo.pagesize);
- }
- else
- {
- physaddr = offset;
- }
-
- REG_WR( pDevice, Nvram.Addr, physaddr );
-
- ctrlreg = NVRAM_CMD_DONE | NVRAM_CMD_DO_IT |
- NVRAM_CMD_LAST | NVRAM_CMD_FIRST | NVRAM_CMD_RD;
-
- status = LM_NVRAM_ExecuteCommand( pDevice, ctrlreg );
- if( status == LM_STATUS_SUCCESS )
- {
- value32 = REG_RD( pDevice, Nvram.ReadData );
-
- /*
- * Data is swapped so that the byte stream is the same
- * in big and little endian systems. Caller will do
- * additional swapping depending on how it wants to
- * look at the data.
- */
- *data = MM_SWAP_BE32( value32 );
- }
-
- return status;
-} /* LM_NVRAM_Read_UINT32 */
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_VOID
-LM_EEPROM_ReadSize( PLM_DEVICE_BLOCK pDevice, LM_UINT32 * size )
-{
- LM_UINT32 cursize;
- LM_UINT32 value32;
- LM_STATUS status;
-
- /*
- * Initialize the chipsize to the largest EEPROM size we support.
- * This will intentionally restrict our sizing operations to the
- * first EEPROM chip.
- */
- pDevice->flashinfo.chipsize = ATMEL_AT24C512_CHIP_SIZE;
-
- value32 = 0;
-
- /* If anything fails, use the smallest chip as the default chip size. */
- cursize = ATMEL_AT24C64_CHIP_SIZE;
-
- status = LM_NvramRead(pDevice, 0, &value32);
- if( status != LM_STATUS_SUCCESS )
- {
- goto done;
- }
-
- value32 = MM_SWAP_BE32(value32);
- if( value32 != 0x669955aa )
- {
- goto done;
- }
-
- /*
- * Size the chip by reading offsets at increasing powers of two.
- * When we encounter our validation signature, we know the addressing
- * has wrapped around, and thus have our chip size.
- */
- while( cursize < ATMEL_AT24C64_CHIP_SIZE )
- {
- status = LM_NvramRead(pDevice, cursize, &value32);
- if( status != LM_STATUS_SUCCESS )
- {
- cursize = ATMEL_AT24C64_CHIP_SIZE;
- break;
- }
-
- value32 = MM_SWAP_BE32(value32);
- if( value32 == 0x669955aa )
- {
- break;
- }
- cursize <<= 1;
- }
-
-done:
-
- *size = cursize;
- pDevice->flashinfo.pagesize = cursize;
-
-
-} /* LM_EEPROM_ReadSize */
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_FLASH_Atmel_Buffered_ReadSize( PLM_DEVICE_BLOCK pDevice, LM_UINT32 * size )
-{
- LM_UINT32 config3;
- LM_UINT32 value32;
- LM_STATUS status;
-
- /* Temporarily replace the read command with a "read ID" command. */
- config3 = REG_RD( pDevice, Nvram.Config3 );
- value32 = config3 & ~NVRAM_READ_COMMAND(NVRAM_COMMAND_MASK);
- value32 |= NVRAM_READ_COMMAND(0x57);
- REG_WR( pDevice, Nvram.Config3, value32 );
-
- REG_WR( pDevice, Nvram.Addr, 0x0 );
-
- status = LM_NVRAM_Read_UINT32(pDevice, 0x0, &value32);
-
- /* Restore the original read command. */
- REG_WR( pDevice, Nvram.Config3, config3 );
- if( status == LM_STATUS_SUCCESS )
- {
- switch( value32 & 0x3c )
- {
- case 0x0c:
- *size = (1 * (1<<20))/8;
- break;
- case 0x14:
- *size = (2 * (1<<20))/8;
- break;
- case 0x1c:
- *size = (4 * (1<<20))/8;
- break;
- case 0x24:
- *size = (8 * (1<<20))/8;
- break;
- }
- }
-
- return status;
-} /* LM_FLASH_Atmel_Buffered_ReadSize */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_FLASH_ST_ReadSize( PLM_DEVICE_BLOCK pDevice, LM_UINT32 * size )
-{
- LM_STATUS status;
- LM_UINT32 i;
- LM_UINT32 ctrlreg;
- LM_UINT32 value32;
- LM_UINT32 config1;
-
- /* We need to get the size through pass-thru mode. */
- config1 = REG_RD( pDevice, Nvram.Config1 );
- value32 = config1 | FLASH_PASS_THRU_MODE;
- REG_WR( pDevice, Nvram.Config1, value32 );
-
- /* Issue the "read ID" command. */
- REG_WR( pDevice, Nvram.WriteData, 0x9f );
-
- ctrlreg = NVRAM_CMD_DO_IT | NVRAM_CMD_DONE | NVRAM_CMD_FIRST | NVRAM_CMD_WR;
- status = LM_NVRAM_ExecuteCommand( pDevice, ctrlreg );
- if( status == LM_STATUS_FAILURE )
- {
- goto done;
- }
-
- /* Read in the "read ID" response. */
- ctrlreg = NVRAM_CMD_DO_IT | NVRAM_CMD_DONE;
-
- /* Discard the first three bytes. */
- for( i = 0; i < 2; i++ )
- {
- status = LM_NVRAM_ExecuteCommand( pDevice, ctrlreg );
- if( status == LM_STATUS_FAILURE )
- {
- goto done;
- }
-
- value32 = REG_RD(pDevice, Nvram.ReadData);
- }
-
- ctrlreg |= NVRAM_CMD_LAST;
-
- status = LM_NVRAM_ExecuteCommand( pDevice, ctrlreg );
- if( status == LM_STATUS_SUCCESS )
- {
- value32 = REG_RD(pDevice, Nvram.ReadData) & 0xff;
- switch( value32 )
- {
- case 0x11:
- *size = (1 * (1<<20)) / 8;
- break;
- case 0x12:
- *size = (2 * (1<<20)) / 8;
- break;
- case 0x13:
- *size = (4 * (1<<20)) / 8;
- break;
- case 0x14:
- *size = (8 * (1<<20)) / 8;
- break;
- }
- }
-
-done:
-
- /* Restore the previous flash mode. */
- REG_WR( pDevice, Nvram.Config1, config1 );
-
- return status;
-} /* LM_FLASH_ST_ReadSize */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_FLASH_Saifun_ReadSize( PLM_DEVICE_BLOCK pDevice, LM_UINT32 * size )
-{
- LM_UINT32 config3;
- LM_UINT32 value32;
- LM_STATUS status;
-
- /* Temporarily replace the read command with a "read ID" command. */
- config3 = REG_RD( pDevice, Nvram.Config3 );
- value32 = config3 & ~NVRAM_READ_COMMAND(NVRAM_COMMAND_MASK);
- value32 |= NVRAM_READ_COMMAND(0xab);
- REG_WR( pDevice, Nvram.Config3, value32 );
-
- REG_WR( pDevice, Nvram.Addr, 0x0 );
-
- status = LM_NVRAM_Read_UINT32(pDevice, 0x0, &value32);
-
- /* Restore the original read command. */
- REG_WR( pDevice, Nvram.Config3, config3 );
-
- if( status == LM_STATUS_SUCCESS )
- {
- switch( value32 & 0xff )
- {
- case 0x05:
- *size = (512 * (1<<10)/8);
- break;
- case 0x10:
- *size = (1 * (1<<20)/8);
- break;
- case 0x11:
- *size = (2 * (1<<20)/8);
- break;
- }
- }
-
- return status;
-} /* LM_FLASH_Saifun_ReadSize */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_FLASH_ReadSize( PLM_DEVICE_BLOCK pDevice, LM_UINT32 * size )
-{
- LM_UINT32 value32;
- LM_STATUS status;
-
- status = LM_NVRAM_AcquireLock( pDevice );
- if( status == LM_STATUS_FAILURE )
- {
- return status;
- }
-
- if(T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- if( (pDevice->Flags & PROTECTED_NVRAM_FLAG) == 0)
- {
- value32 = REG_RD( pDevice, Nvram.NvmAccess );
- value32 |= NVRAM_ACCESS_ENABLE | NVRAM_ACCESS_WRITE_ENABLE;
- REG_WR( pDevice, Nvram.NvmAccess, value32 );
- }
- }
-
- switch( pDevice->flashinfo.jedecnum )
- {
- case JEDEC_ST:
- status = LM_FLASH_ST_ReadSize( pDevice, size );
- break;
- case JEDEC_ATMEL:
- if( pDevice->flashinfo.buffered == TRUE )
- {
- status = LM_FLASH_Atmel_Buffered_ReadSize( pDevice, size );
- }
- else
- {
- status = LM_STATUS_FAILURE;
- }
- break;
- case JEDEC_SAIFUN:
- status = LM_FLASH_Saifun_ReadSize( pDevice, size );
- break;
- case JEDEC_SST:
- default:
- status = LM_STATUS_FAILURE;
- }
-
- if(T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- if( (pDevice->Flags & PROTECTED_NVRAM_FLAG) == 0)
- {
- value32 = REG_RD( pDevice, Nvram.NvmAccess );
- value32 &= ~(NVRAM_ACCESS_ENABLE | NVRAM_ACCESS_WRITE_ENABLE);
- REG_WR( pDevice, Nvram.NvmAccess, value32 );
- }
- }
-
- LM_NVRAM_ReleaseLock( pDevice );
-
- return status;
-} /* LM_FLASH_ReadSize */
-
-STATIC LM_VOID LM_NVRAM_Detect_570X( PLM_DEVICE_BLOCK pDevice )
-{
- LM_UINT32 value32;
-
- value32 = REG_RD(pDevice, Nvram.Config1);
-
- if( (value32 & FLASH_INTERFACE_ENABLE) == 0 )
- {
- pDevice->flashinfo.romtype = ROM_TYPE_EEPROM;
- }
- else
- {
- /*
- * 5705 and older products do not have bits 24 and 25 defined.
- * If we've gotten here, then we can guarantee the flash is
- * an Atmel AT45DB011DB.
- */
- pDevice->flashinfo.jedecnum = JEDEC_ATMEL;
- pDevice->flashinfo.romtype = ROM_TYPE_FLASH;
- pDevice->flashinfo.pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
- pDevice->flashinfo.buffered = TRUE;
- }
-} /* LM_NVRAM_Detect_570X */
-
-STATIC LM_VOID LM_NVRAM_Detect_5750( PLM_DEVICE_BLOCK pDevice )
-{
- LM_UINT32 value32;
-
- value32 = REG_RD(pDevice, Nvram.Config1);
-
- if( (value32 & FLASH_INTERFACE_ENABLE) == 0 )
- {
- pDevice->flashinfo.romtype = ROM_TYPE_EEPROM;
- return;
- }
-
- pDevice->flashinfo.romtype = ROM_TYPE_FLASH;
-
- switch( value32 & FLASH_PART_5750_TYPEMASK )
- {
- case FLASH_VENDOR_ATMEL_FLASH_BUFFERED:
- pDevice->flashinfo.jedecnum = JEDEC_ATMEL;
- pDevice->flashinfo.pagesize = ATMEL_AT45DB0X1B_PAGE_SIZE;
- pDevice->flashinfo.buffered = TRUE;
- break;
- case FLASH_VENDOR_ATMEL_FLASH_UNBUFFERED:
- pDevice->flashinfo.jedecnum = JEDEC_ATMEL;
- pDevice->flashinfo.pagesize = ATMEL_AT25F512_PAGE_SIZE;
- pDevice->flashinfo.buffered = FALSE;
- break;
- case FLASH_VENDOR_ST:
- pDevice->flashinfo.jedecnum = JEDEC_ST;
- pDevice->flashinfo.pagesize = ST_M45PEX0_PAGE_SIZE;
- pDevice->flashinfo.buffered = TRUE;
- break;
- case FLASH_VENDOR_SAIFUN:
- pDevice->flashinfo.jedecnum = JEDEC_SAIFUN;
- pDevice->flashinfo.pagesize = SAIFUN_SA25F0XX_PAGE_SIZE;
- pDevice->flashinfo.buffered = FALSE;
- break;
- case FLASH_VENDOR_SST_SMALL:
- case FLASH_VENDOR_SST_LARGE:
- pDevice->flashinfo.jedecnum = JEDEC_SST;
- pDevice->flashinfo.pagesize = SST_25VF0X0_PAGE_SIZE;
- pDevice->flashinfo.buffered = FALSE;
- break;
- default:
- B57_ERR(("bcm57xx : Unknown NVRAM type.\n"));
- pDevice->flashinfo.jedecnum = 0;
- pDevice->flashinfo.romtype = 0;
- pDevice->flashinfo.buffered = FALSE;
- pDevice->flashinfo.pagesize = 0;
- }
-} /* LM_NVRAM_Detect_5750 */
-
-STATIC LM_VOID LM_NVRAM_Detect_5752( PLM_DEVICE_BLOCK pDevice )
-{
- LM_BOOL supported;
- LM_UINT32 value32;
-
- supported = FALSE;
-
- value32 = REG_RD(pDevice, Nvram.Config1);
-
- if(value32 & BIT_27)
- pDevice->Flags |= PROTECTED_NVRAM_FLAG;
-
- switch( value32 & FLASH_PART_5752_TYPEMASK )
- {
- case FLASH_PART_5752_EEPROM_ATMEL_64K:
- pDevice->flashinfo.jedecnum = JEDEC_ATMEL;
- pDevice->flashinfo.romtype = ROM_TYPE_EEPROM;
- pDevice->flashinfo.buffered = FALSE;
- pDevice->flashinfo.chipsize = (64 * (1<<10)/8);
- supported = TRUE;
- break;
-
- case FLASH_PART_5752_EEPROM_ATMEL_376K:
- pDevice->flashinfo.jedecnum = JEDEC_ATMEL;
- pDevice->flashinfo.romtype = ROM_TYPE_EEPROM;
- pDevice->flashinfo.buffered = FALSE;
- pDevice->flashinfo.chipsize = (512 * (1<<10)/8);
- supported = TRUE;
- break;
-
- case FLASH_PART_5752_FLASH_ATMEL_AT45DB041:
- pDevice->flashinfo.jedecnum = JEDEC_ATMEL;
- pDevice->flashinfo.romtype = ROM_TYPE_FLASH;
- pDevice->flashinfo.buffered = TRUE;
- pDevice->flashinfo.chipsize = (4 * (1<<20)) / 8;
- supported = TRUE;
- break;
-
- case FLASH_PART_5752_FLASH_ATMEL_AT25F512:
- pDevice->flashinfo.jedecnum = JEDEC_ATMEL;
- pDevice->flashinfo.romtype = ROM_TYPE_FLASH;
- pDevice->flashinfo.buffered = FALSE;
- pDevice->flashinfo.chipsize = (512 * (1<<10)/8);
- supported = TRUE;
- break;
-
- case FLASH_PART_5752_FLASH_ST_M25P10A:
- pDevice->flashinfo.jedecnum = JEDEC_ST;
- pDevice->flashinfo.romtype = ROM_TYPE_FLASH;
- pDevice->flashinfo.buffered = TRUE;
- pDevice->flashinfo.chipsize = (1 * (1<<20)) / 8;
- supported = TRUE;
- break;
- case FLASH_PART_5752_FLASH_ST_M25P05A:
- pDevice->flashinfo.jedecnum = JEDEC_ST;
- pDevice->flashinfo.romtype = ROM_TYPE_FLASH;
- pDevice->flashinfo.buffered = TRUE;
- pDevice->flashinfo.chipsize = (512 * (1<<10)/8);
- supported = TRUE;
- break;
-
- case FLASH_PART_5752_FLASH_ST_M45PE10:
- pDevice->flashinfo.jedecnum = JEDEC_ST;
- pDevice->flashinfo.romtype = ROM_TYPE_FLASH;
- pDevice->flashinfo.buffered = TRUE;
- pDevice->flashinfo.chipsize = (1 * (1<<20)) / 8;
- supported = TRUE;
- break;
-
- case FLASH_PART_5752_FLASH_ST_M45PE20:
- pDevice->flashinfo.jedecnum = JEDEC_ST;
- pDevice->flashinfo.romtype = ROM_TYPE_FLASH;
- pDevice->flashinfo.buffered = TRUE;
- pDevice->flashinfo.chipsize = (2 * (1<<20)) / 8;
- supported = TRUE;
- break;
-
- case FLASH_PART_5752_FLASH_ST_M45PE40:
- pDevice->flashinfo.jedecnum = JEDEC_ST;
- pDevice->flashinfo.romtype = ROM_TYPE_FLASH;
- pDevice->flashinfo.buffered = TRUE;
- pDevice->flashinfo.chipsize = (4 * (1<<20)) / 8;
- supported = TRUE;
- break;
- default:
- B57_ERR(("bcm57xx : Unknown NVRAM type.\n"));
- }
-
- if( pDevice->flashinfo.romtype == ROM_TYPE_FLASH )
- {
- switch( value32 & FLASH_PART_5752_PAGEMASK )
- {
- case FLASH_PART_5752_PAGE_SIZE_256B:
- pDevice->flashinfo.pagesize = 256;
- break;
- case FLASH_PART_5752_PAGE_SIZE_512B:
- pDevice->flashinfo.pagesize = 512;
- break;
- case FLASH_PART_5752_PAGE_SIZE_1K:
- pDevice->flashinfo.pagesize = 1024;
- break;
- case FLASH_PART_5752_PAGE_SIZE_2K:
- pDevice->flashinfo.pagesize = 2048;
- break;
- case FLASH_PART_5752_PAGE_SIZE_4K:
- pDevice->flashinfo.pagesize = 4096;
- break;
- case FLASH_PART_5752_PAGE_SIZE_264B:
- pDevice->flashinfo.pagesize = 264;
- break;
- default:
- B57_ERR(("bcm57xx : Unknown NVRAM page size.\n"));
- supported = FALSE;
- }
- }
-
- if( supported != TRUE )
- {
- B57_ERR(("Flash type unsupported!!!\n"));
- pDevice->flashinfo.jedecnum = 0;
- pDevice->flashinfo.romtype = 0;
- pDevice->flashinfo.buffered = FALSE;
- pDevice->flashinfo.pagesize = 0;
- }
-
-
-} /* LM_NVRAM_Detect_5752 */
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_VOID LM_NVRAM_Init( PLM_DEVICE_BLOCK pDevice )
-{
- LM_UINT32 Value32;
-
- /* BCM4785: Avoid all access to NVRAM & EEPROM. */
- if (pDevice->Flags & SB_CORE_FLAG)
- return;
-
- pDevice->NvramSize = 0;
-
- /* Intialize clock period and state machine. */
- Value32 = SEEPROM_ADDR_CLK_PERD(SEEPROM_CLOCK_PERIOD) |
- SEEPROM_ADDR_FSM_RESET;
- REG_WR(pDevice, Grc.EepromAddr, Value32);
- REG_RD_BACK(pDevice, Grc.EepromAddr);
-
- MM_Wait(100);
-
- /* Serial eeprom access using the Grc.EepromAddr/EepromData registers. */
- Value32 = REG_RD(pDevice, Grc.LocalCtrl);
- REG_WR(pDevice, Grc.LocalCtrl, Value32 | GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM);
-
- switch( T3_ASIC_REV(pDevice->ChipRevId) )
- {
- case T3_ASIC_REV_5700:
- case T3_ASIC_REV_5701:
- pDevice->flashinfo.romtype = ROM_TYPE_EEPROM;
- break;
- case T3_ASIC_REV_5752:
- LM_NVRAM_Detect_5752(pDevice);
- break;
- case T3_ASIC_REV_5714_A0:
- case T3_ASIC_REV_5780:
- case T3_ASIC_REV_5714:
- case T3_ASIC_REV_5750:
- LM_NVRAM_Detect_5750(pDevice);
- break;
- default:
- LM_NVRAM_Detect_570X(pDevice);
- }
-
- /* Set the 5701 compatibility mode if we are using EEPROM. */
- if( T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
- T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701 &&
- pDevice->flashinfo.romtype == ROM_TYPE_EEPROM )
- {
- Value32 = REG_RD(pDevice, Nvram.Config1);
-
- if( T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- if( (pDevice->Flags & PROTECTED_NVRAM_FLAG) == 0)
- {
- REG_WR(pDevice, Nvram.NvmAccess,
- REG_RD(pDevice, Nvram.NvmAccess) | ACCESS_EN);
- }
- }
-
- /* Use the new interface to read EEPROM. */
- Value32 &= ~FLASH_COMPAT_BYPASS;
-
- REG_WR(pDevice, Nvram.Config1, Value32);
-
- if( T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- if( (pDevice->Flags & PROTECTED_NVRAM_FLAG) == 0)
- {
- REG_WR(pDevice, Nvram.NvmAccess,
- REG_RD(pDevice, Nvram.NvmAccess) & ~ACCESS_EN);
- }
- }
- }
-
- if( !(T3_ASIC_5752(pDevice->ChipRevId)) )
- {
- if( pDevice->flashinfo.romtype == ROM_TYPE_EEPROM )
- {
- /* The only EEPROM we support is an ATMEL */
- pDevice->flashinfo.jedecnum = JEDEC_ATMEL;
- pDevice->flashinfo.pagesize = 0;
- pDevice->flashinfo.buffered = FALSE;
-
- LM_EEPROM_ReadSize( pDevice, &pDevice->flashinfo.chipsize );
- }
- else
- {
- LM_FLASH_ReadSize( pDevice, &pDevice->flashinfo.chipsize );
- pDevice->Flags |= FLASH_DETECTED_FLAG;
- }
- }
-
- pDevice->NvramSize = pDevice->flashinfo.chipsize;
-
- B57_INFO(("*nvram:size=0x%x jnum=0x%x page=0x%x buff=0x%x \n",
- pDevice->NvramSize, pDevice->flashinfo.jedecnum,
- pDevice->flashinfo.pagesize, pDevice->flashinfo.buffered));
-
-} /* LM_NVRAM_Init */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS
-LM_NvramRead( PLM_DEVICE_BLOCK pDevice, LM_UINT32 offset, LM_UINT32 * data )
-{
- LM_UINT32 value32;
- LM_STATUS status;
-
- /* BCM4785: Avoid all access to NVRAM & EEPROM. */
- if (pDevice->Flags & SB_CORE_FLAG) {
- *data = 0xffffffff;
- return LM_STATUS_FAILURE;
- }
-
- if( offset >= pDevice->flashinfo.chipsize )
- {
- return LM_STATUS_FAILURE;
- }
-
- if( T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701 )
- {
- status = LM_EEPROM_Read_UINT32( pDevice, offset, data );
- }
- else
- {
- status = LM_NVRAM_AcquireLock( pDevice );
- if( status == LM_STATUS_FAILURE )
- {
- return status;
- }
-
- if(T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- if( (pDevice->Flags & PROTECTED_NVRAM_FLAG) == 0)
- {
- value32 = REG_RD( pDevice, Nvram.NvmAccess );
- value32 |= NVRAM_ACCESS_ENABLE;
- REG_WR( pDevice, Nvram.NvmAccess, value32 );
- }
- }
-
- status = LM_NVRAM_Read_UINT32(pDevice, offset, data);
-
- if(T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- if( (pDevice->Flags & PROTECTED_NVRAM_FLAG) == 0)
- {
- value32 = REG_RD( pDevice, Nvram.NvmAccess );
- value32 &= ~NVRAM_ACCESS_ENABLE;
- REG_WR( pDevice, Nvram.NvmAccess, value32 );
- }
- }
-
- LM_NVRAM_ReleaseLock( pDevice );
- }
-
- return status;
-} /* LM_NvramRead */
-
-
-
-#ifdef ETHTOOL_SEEPROM
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_NVRAM_ReadBlock(PLM_DEVICE_BLOCK pDevice, LM_UINT32 offset,
- LM_UINT8 *data, LM_UINT32 size)
-{
- LM_STATUS status;
- LM_UINT32 value32;
- LM_UINT32 bytecnt;
- LM_UINT8 * srcptr;
-
- status = LM_STATUS_SUCCESS;
-
- while( size > 0 )
- {
- /* Make sure the read is word aligned. */
- value32 = offset & 0x3;
- if( value32 )
- {
- bytecnt = sizeof(LM_UINT32) - value32;
- offset -= value32;
- srcptr = (LM_UINT8 *)(&value32) + value32;
- }
- else
- {
- bytecnt = sizeof(LM_UINT32);
- srcptr = (LM_UINT8 *)(&value32);
- }
-
- if( bytecnt > size )
- {
- bytecnt = size;
- }
-
- if( T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
- T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701 )
- {
- status = LM_NVRAM_Read_UINT32( pDevice, offset, &value32 );
- }
- else
- {
- status = LM_EEPROM_Read_UINT32( pDevice, offset, &value32 );
- }
-
- if( status != LM_STATUS_SUCCESS )
- {
- break;
- }
-
- memcpy( data, srcptr, bytecnt );
-
- offset += sizeof(LM_UINT32);
- data += bytecnt;
- size -= bytecnt;
- }
-
- return status;
-} /* LM_NVRAM_ReadBlock */
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_EEPROM_WriteBlock( PLM_DEVICE_BLOCK pDevice, LM_UINT32 offset,
- LM_UINT8 * data, LM_UINT32 size )
-{
- LM_UINT8 * dstptr;
- LM_UINT32 value32;
- LM_UINT32 bytecnt;
- LM_UINT32 subword1;
- LM_UINT32 subword2;
- LM_UINT32 Addr;
- LM_UINT32 Dev;
- LM_STATUS status;
-
- if( offset > pDevice->flashinfo.chipsize )
- {
- return LM_STATUS_FAILURE;
- }
-
- status = LM_STATUS_SUCCESS;
-
- if( size == 0 )
- {
- return status;
- }
-
- if( offset & 0x3 )
- {
- /*
- * If our initial offset does not fall on a word boundary, we
- * have to do a read / modify / write to preserve the
- * preceding bits we are not interested in.
- */
- status = LM_EEPROM_Read_UINT32(pDevice, offset & ~0x3, &subword1);
- if( status == LM_STATUS_FAILURE )
- {
- return status;
- }
- }
-
- if( (offset + size) & 0x3 )
- {
- /*
- * Likewise, if our ending offset does not fall on a word
- * boundary, we have to do a read / modify / write to
- * preserve the trailing bits we are not interested in.
- */
- status = LM_EEPROM_Read_UINT32( pDevice, (offset + size) & ~0x3,
- &subword2 );
- if( status == LM_STATUS_FAILURE )
- {
- return status;
- }
- }
-
- /* Enable EEPROM write. */
- if( pDevice->Flags & EEPROM_WP_FLAG )
- {
- REG_WR( pDevice, Grc.LocalCtrl,
- pDevice->GrcLocalCtrl | GRC_MISC_LOCAL_CTRL_GPIO_OE1 );
- REG_RD_BACK( pDevice, Grc.LocalCtrl );
- MM_Wait(40);
-
- value32 = REG_RD( pDevice, Grc.LocalCtrl );
- if( value32 & GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 )
- {
- return LM_STATUS_FAILURE;
- }
- }
-
- while( size > 0 )
- {
- value32 = offset & 0x3;
- if( value32 )
- {
- /*
- * We have to read / modify / write the data to
- * preserve the flash contents preceding the offset.
- */
- offset &= ~0x3;
-
- dstptr = ((LM_UINT8 *)(&value32)) + value32;
- bytecnt = sizeof(LM_UINT32) - value32;
- value32 = subword1;
- }
- else if( size < sizeof(LM_UINT32) )
- {
- dstptr = (LM_UINT8 *)(&value32);
- bytecnt = size;
- value32 = subword2;
- }
- else
- {
- dstptr = (LM_UINT8 *)(&value32);
- bytecnt = sizeof(LM_UINT32);
- }
-
- if( size < bytecnt )
- {
- bytecnt = size;
- }
-
- memcpy( dstptr, (void *)data, bytecnt );
-
- data += bytecnt;
- size -= bytecnt;
-
- /*
- * Swap the data so that the byte stream will be
- * written the same in little and big endian systems.
- */
- value32 = MM_SWAP_LE32(value32);
-
- /* Set the write value to the eeprom */
- REG_WR( pDevice, Grc.EepromData, value32 );
-
- Dev = offset / pDevice->flashinfo.chipsize;
- Addr = offset % pDevice->flashinfo.chipsize;
-
- value32 = REG_RD( pDevice, Grc.EepromAddr );
- value32 &= ~(SEEPROM_ADDR_DEV_ID_MASK | SEEPROM_ADDR_ADDRESS_MASK |
- SEEPROM_ADDR_RW_MASK);
- value32 |= SEEPROM_ADDR_DEV_ID(Dev) | SEEPROM_ADDR_ADDRESS(Addr) |
- SEEPROM_ADDR_START | SEEPROM_ADDR_WRITE;
-
- status = LM_EEPROM_ExecuteCommand( pDevice, value32 );
- if( status != LM_STATUS_SUCCESS )
- {
- break;
- }
-
- offset += sizeof(LM_UINT32);
- }
-
- /* Write-protect EEPROM. */
- if( pDevice->Flags & EEPROM_WP_FLAG )
- {
- REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
- REG_RD_BACK(pDevice, Grc.LocalCtrl);
- MM_Wait(40);
- }
-
- return status;
-} /* LM_EEPROM_WriteBlock */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_NVRAM_WriteBlockUnBuffered( PLM_DEVICE_BLOCK pDevice, LM_UINT32 offset,
- LM_UINT8 * data, LM_UINT32 size )
-{
- LM_UINT i;
- LM_STATUS status;
- LM_UINT32 tgtoff;
- LM_UINT32 value32;
- LM_UINT32 ctrlreg;
- LM_UINT32 pagesize;
- LM_UINT32 pagemask;
- LM_UINT32 physaddr;
-
- /* Cache the pagesize. */
- pagesize = pDevice->flashinfo.pagesize;
-
- if( pDevice->flashinfo.jedecnum == JEDEC_SAIFUN )
- {
- /* Config2 = 0x500d8 */
- /* Config3 = 0x3840253 */
- /* Write1 = 0xaf000400 */
-
- /* Configure the erase command to be "page erase". */
- /* Configure the status command to be "read status register". */
- value32 = REG_RD( pDevice, Nvram.Config2 );
- value32 &= ~(NVRAM_STATUS_COMMAND( NVRAM_COMMAND_MASK ) |
- NVRAM_ERASE_COMMAND( NVRAM_COMMAND_MASK ));
- value32 |= NVRAM_STATUS_COMMAND( SAIFUN_SA25F0XX_READ_STATUS_CMD ) |
- NVRAM_ERASE_COMMAND( SAIFUN_SA25F0XX_PAGE_ERASE_CMD );
- REG_WR( pDevice, Nvram.Config2, value32 );
-
- /* Configure the write command to be "page write". */
- value32 = REG_RD( pDevice, Nvram.Config3 );
- value32 &= ~NVRAM_WRITE_UNBUFFERED_COMMAND( NVRAM_COMMAND_MASK );
- value32 |= NVRAM_WRITE_UNBUFFERED_COMMAND( SAIFUN_SA25F0XX_PAGE_WRITE_CMD );
- REG_WR( pDevice, Nvram.Config3, value32 );
-
- /* Make sure the "write enable" command is correct. */
- value32 = REG_RD( pDevice, Nvram.Write1 );
- value32 &= ~NVRAM_WRITE1_WRENA_CMD( NVRAM_COMMAND_MASK );
- value32 |= NVRAM_WRITE1_WRENA_CMD( SAIFUN_SA25F0XX_WRENA_CMD );
- REG_WR( pDevice, Nvram.Write1, value32 );
-
- pagemask = SAIFUN_SA25F0XX_PAGE_MASK;
- }
- else
- {
- /* Unsupported flash type */
- return LM_STATUS_FAILURE;
- }
-
- if( size == 0 )
- {
- status = LM_STATUS_SUCCESS;
- goto done;
- }
-
- while( size > 0 )
- {
- /* Align the offset to a page boundary. */
- physaddr = offset & ~pagemask;
-
- status = LM_NVRAM_ReadBlock( pDevice, physaddr,
- pDevice->flashbuffer,
- pagesize );
- if( status == LM_STATUS_FAILURE )
- {
- break;
- }
-
- /* Calculate the target index. */
- tgtoff = offset & pagemask;
-
- /* Copy the new data into the save buffer. */
- for( i = tgtoff; i < pagesize && size > 0; i++ )
- {
- pDevice->flashbuffer[i] = *data++;
- size--;
- }
-
- /* Move the offset to the next page. */
- offset = offset + (pagesize - tgtoff);
-
- /*
- * The LM_NVRAM_ReadBlock() function releases
- * the access enable bit. Reacquire it.
- */
- if( (pDevice->Flags & PROTECTED_NVRAM_FLAG) == 0)
- REG_WR(pDevice, Nvram.NvmAccess, NVRAM_ACCESS_ENABLE);
-
-
- /*
- * Before we can erase the flash page, we need
- * to issue a special "write enable" command.
- */
- ctrlreg = NVRAM_CMD_WRITE_ENABLE | NVRAM_CMD_DO_IT | NVRAM_CMD_DONE;
-
- status = LM_NVRAM_ExecuteCommand( pDevice, ctrlreg );
- if( status == LM_STATUS_FAILURE )
- {
- break;
- }
-
- /* Erase the target page */
- REG_WR(pDevice, Nvram.Addr, physaddr);
-
- ctrlreg = NVRAM_CMD_DO_IT | NVRAM_CMD_DONE | NVRAM_CMD_WR |
- NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_ERASE;
-
- status = LM_NVRAM_ExecuteCommand( pDevice, ctrlreg );
- if( status == LM_STATUS_FAILURE )
- {
- break;
- }
-
- /* Issue another write enable to start the write. */
- ctrlreg = NVRAM_CMD_WRITE_ENABLE | NVRAM_CMD_DO_IT | NVRAM_CMD_DONE;
-
- status = LM_NVRAM_ExecuteCommand( pDevice, ctrlreg );
- if( status == LM_STATUS_FAILURE )
- {
- break;
- }
-
- /* Copy the data into our NIC's buffers. */
- for( i = 0; i < pagesize; i+= 4 )
- {
- value32 = *((LM_UINT32 *)(&pDevice->flashbuffer[i]));
- value32 = MM_SWAP_BE32( value32 );
-
- /* Write the location we wish to write to. */
- REG_WR( pDevice, Nvram.Addr, physaddr );
-
- /* Write the data we wish to write. */
- REG_WR( pDevice, Nvram.WriteData, value32 );
-
- ctrlreg = NVRAM_CMD_DO_IT | NVRAM_CMD_DONE | NVRAM_CMD_WR;
-
- if( i == 0 )
- {
- ctrlreg |= NVRAM_CMD_FIRST;
- }
- else if( i == (pagesize - 4) )
- {
- ctrlreg |= NVRAM_CMD_LAST;
- }
-
- status = LM_NVRAM_ExecuteCommand( pDevice, ctrlreg );
- if( status == LM_STATUS_FAILURE )
- {
- size = 0;
- break;
- }
-
- physaddr += sizeof(LM_UINT32);
- }
- }
-
- /* Paranoia. Turn off the "write enable" flag. */
- ctrlreg = NVRAM_CMD_WRITE_DISABLE | NVRAM_CMD_DO_IT | NVRAM_CMD_DONE;
-
- status = LM_NVRAM_ExecuteCommand( pDevice, ctrlreg );
-
-done:
-
- return status;
-} /* LM_NVRAM_WriteBlockUnBuffered */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_NVRAM_WriteBlockBuffered( PLM_DEVICE_BLOCK pDevice, LM_UINT32 offset,
- LM_UINT8 * data, LM_UINT32 size )
-{
- LM_STATUS status;
- LM_UINT32 value32;
- LM_UINT32 bytecnt;
- LM_UINT32 ctrlreg;
- LM_UINT32 pageoff;
- LM_UINT32 physaddr;
- LM_UINT32 subword1;
- LM_UINT32 subword2;
- LM_UINT8 * dstptr;
-
- if(T3_ASIC_5752(pDevice->ChipRevId) &&
- (pDevice->flashinfo.jedecnum == JEDEC_ST ||
- pDevice->flashinfo.jedecnum == JEDEC_ATMEL ))
- {
- /* Do nothing as the 5752 does will take care of it */
- }
- else if( pDevice->flashinfo.jedecnum == JEDEC_ST )
- {
- /*
- * Program our chip to look at bit0 of the NVRAM's status
- * register when polling the write or erase operation status.
- */
- value32 = REG_RD(pDevice, Nvram.Config1);
- value32 &= ~FLASH_STATUS_BITS_MASK;
- REG_WR( pDevice, Nvram.Config1, value32 );
-
- /* Program the "read status" and "page erase" commands. */
- value32 = NVRAM_STATUS_COMMAND( ST_M45PEX0_READ_STATUS_CMD ) |
- NVRAM_ERASE_COMMAND( ST_M45PEX0_PAGE_ERASE_CMD );
- REG_WR( pDevice, Nvram.Config2, value32 );
-
- /* Set the write command to be "page program". */
- value32 = REG_RD(pDevice, Nvram.Config3); /* default = 0x03840a53 */
- value32 &= ~NVRAM_WRITE_UNBUFFERED_COMMAND( NVRAM_COMMAND_MASK );
- value32 |= NVRAM_WRITE_UNBUFFERED_COMMAND( ST_M45PEX0_PAGE_PRGM_CMD );
- REG_WR( pDevice, Nvram.Config3, value32 );
-
- /* Set the "write enable" and "write disable" commands. */
- value32 = NVRAM_WRITE1_WRENA_CMD( ST_M45PEX0_WRENA_CMD ) |
- NVRAM_WRITE1_WRDIS_CMD( ST_M45PEX0_WRDIS_CMD );
- REG_WR( pDevice, Nvram.Write1, value32 );
- }
- else if( pDevice->flashinfo.jedecnum == JEDEC_ATMEL )
- {
- if( pDevice->flashinfo.romtype == ROM_TYPE_EEPROM )
- {
- #if 0
- Config1 = 0x2008200
- Config2 = 0x9f0081
- Config3 = 0xa184a053
- Write1 = 0xaf000400
- #endif
- }
- else if( pDevice->flashinfo.buffered == TRUE )
- {
- /*
- * Program our chip to look at bit7 of the NVRAM's status
- * register when polling the write operation status.
- */
- value32 = REG_RD(pDevice, Nvram.Config1);
- value32 |= FLASH_STATUS_BITS_MASK;
- REG_WR( pDevice, Nvram.Config1, value32 );
-
- /* Set the write command to be "page program". */
- value32 = REG_RD(pDevice, Nvram.Config3); /* default = 0x03840a53 */
- value32 &= ~NVRAM_WRITE_UNBUFFERED_COMMAND( NVRAM_COMMAND_MASK );
- value32 |= NVRAM_WRITE_UNBUFFERED_COMMAND( ATMEL_AT45DB0X1B_BUFFER_WRITE_CMD );
- REG_WR( pDevice, Nvram.Config3, value32 );
- /* Config1 = 0x2008273 */
- /* Config2 = 0x00570081 */
- /* Config3 = 0x68848353 */
- }
- else
- {
- /* NVRAM type unsupported. */
- return LM_STATUS_FAILURE;
- }
- }
- else
- {
- /* NVRAM type unsupported. */
- return LM_STATUS_FAILURE;
- }
-
- status = LM_STATUS_SUCCESS;
-
- if( offset & 0x3 )
- {
- /*
- * If our initial offset does not fall on a word boundary, we
- * have to do a read / modify / write to preserve the
- * preceding bits we are not interested in.
- */
- status = LM_NVRAM_ReadBlock( pDevice, offset & ~0x3,
- (LM_UINT8 *)&subword1,
- sizeof(subword1) );
- if( status == LM_STATUS_FAILURE )
- {
- return status;
- }
- }
-
- if( (offset + size) & 0x3 )
- {
- /*
- * Likewise, if our ending offset does not fall on a word
- * boundary, we have to do a read / modify / write to
- * preserve the trailing bits we are not interested in.
- */
- status = LM_NVRAM_ReadBlock( pDevice, (offset + size) & ~0x3,
- (LM_UINT8 *)&subword2,
- sizeof(subword2) );
- if( status == LM_STATUS_FAILURE )
- {
- return status;
- }
- }
-
- ctrlreg = NVRAM_CMD_FIRST;
-
- while( size > 0 )
- {
- value32 = offset & 0x3;
- if( value32 )
- {
- /*
- * We have to read / modify / write the data to
- * preserve the flash contents preceding the offset.
- */
- offset &= ~0x3;
-
- dstptr = ((LM_UINT8 *)(&value32)) + value32;
- bytecnt = sizeof(LM_UINT32) - value32;
- value32 = subword1;
- }
- else if( size < sizeof(LM_UINT32) )
- {
- dstptr = (LM_UINT8 *)(&value32);
- bytecnt = size;
- value32 = subword2;
- }
- else
- {
- dstptr = (LM_UINT8 *)(&value32);
- bytecnt = sizeof(LM_UINT32);
- }
-
- if( size < bytecnt )
- {
- bytecnt = size;
- }
-
- memcpy( dstptr, (void *)data, bytecnt );
-
- data += bytecnt;
- size -= bytecnt;
-
- /*
- * Swap the data so that the byte stream will be
- * written the same in little and big endian systems.
- */
- value32 = MM_SWAP_BE32(value32);
-
- /* Set the desired write data value to the flash. */
- REG_WR(pDevice, Nvram.WriteData, value32);
-
- pageoff = offset % pDevice->flashinfo.pagesize;
-
- /* Set the target address. */
- if( pDevice->flashinfo.jedecnum == JEDEC_ATMEL &&
- pDevice->flashinfo.romtype == ROM_TYPE_FLASH )
- {
- /*
- * If we're dealing with the special ATMEL part, we need to
- * convert the submitted offset before it can be considered
- * a physical address.
- */
- LM_UINT32 pagenmbr;
-
- pagenmbr = offset / pDevice->flashinfo.pagesize;
- pagenmbr = pagenmbr << ATMEL_AT45DB0X1B_PAGE_POS;
-
- physaddr = pagenmbr + pageoff;
- }
- else
- {
- physaddr = offset;
- }
-
- REG_WR(pDevice, Nvram.Addr, physaddr);
-
- ctrlreg |= (NVRAM_CMD_DO_IT | NVRAM_CMD_DONE | NVRAM_CMD_WR);
-
- if( pageoff == 0 )
- {
- /* Set CMD_FIRST when we are at the beginning of a page. */
- ctrlreg |= NVRAM_CMD_FIRST;
- }
- else if( pageoff == (pDevice->flashinfo.pagesize - 4) )
- {
- /*
- * Enable the write to the current page
- * before moving on to the next one.
- */
- ctrlreg |= NVRAM_CMD_LAST;
- }
-
- if( size == 0 )
- {
- ctrlreg |= NVRAM_CMD_LAST;
- }
-
- if( pDevice->flashinfo.jedecnum == JEDEC_ST &&
- ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5750) ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5714)) &&
- (ctrlreg & NVRAM_CMD_FIRST) )
- {
- LM_UINT32 wrencmd;
-
- REG_WR(pDevice, Nvram.Write1, ST_M45PEX0_WRENA_CMD);
-
- /* We need to issue a special "write enable" command first. */
- wrencmd = NVRAM_CMD_WRITE_ENABLE | NVRAM_CMD_DO_IT | NVRAM_CMD_DONE;
-
- status = LM_NVRAM_ExecuteCommand( pDevice, wrencmd );
- if( status == LM_STATUS_FAILURE )
- {
- return status;
- }
- }
-
- if( pDevice->flashinfo.romtype == ROM_TYPE_EEPROM )
- {
- /* We always do complete word writes to eeprom. */
- ctrlreg |= (NVRAM_CMD_FIRST | NVRAM_CMD_LAST);
- }
-
- status = LM_NVRAM_ExecuteCommand( pDevice, ctrlreg );
- if( status == LM_STATUS_FAILURE )
- {
- break;
- }
-
- offset += sizeof(LM_UINT32);
- ctrlreg = 0;
- }
-
- return status;
-} /* LM_NVRAM_WriteBlockBuffered */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS LM_NVRAM_WriteBlock( PLM_DEVICE_BLOCK pDevice, LM_UINT32 offset,
- LM_UINT8 * data, LM_UINT32 size )
-{
- LM_UINT32 value32;
- LM_STATUS status;
-
- if( offset > pDevice->flashinfo.chipsize ||
- (offset + size) > pDevice->flashinfo.chipsize )
- {
- return LM_STATUS_FAILURE;
- }
-
- if( size == 0 )
- {
- return LM_STATUS_SUCCESS;
- }
-
- if( T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701 )
- {
- status = LM_EEPROM_WriteBlock( pDevice, offset, data, size );
- }
- else
- {
- status = LM_NVRAM_AcquireLock( pDevice );
- if( status == LM_STATUS_FAILURE )
- {
- return status;
- }
-
- if(T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- if( (pDevice->Flags & PROTECTED_NVRAM_FLAG) == 0)
- {
- value32 = REG_RD( pDevice, Nvram.NvmAccess );
- value32 |= (NVRAM_ACCESS_ENABLE | NVRAM_ACCESS_WRITE_ENABLE);
- REG_WR( pDevice, Nvram.NvmAccess, value32 );
- }
- }
-
- /* Enable EEPROM write. */
- if( pDevice->Flags & EEPROM_WP_FLAG )
- {
- REG_WR(pDevice, Grc.LocalCtrl,
- pDevice->GrcLocalCtrl | GRC_MISC_LOCAL_CTRL_GPIO_OE1);
- REG_RD_BACK(pDevice, Grc.LocalCtrl);
- MM_Wait(40);
-
- value32 = REG_RD(pDevice, Grc.LocalCtrl);
- if( value32 & GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 )
- {
- status = LM_STATUS_FAILURE;
- goto error;
- }
- }
-
- value32 = REG_RD(pDevice, Grc.Mode);
- value32 |= GRC_MODE_NVRAM_WRITE_ENABLE;
- REG_WR(pDevice, Grc.Mode, value32);
-
- if( pDevice->flashinfo.buffered == TRUE ||
- pDevice->flashinfo.romtype == ROM_TYPE_EEPROM )
- {
- status = LM_NVRAM_WriteBlockBuffered(pDevice, offset, data, size);
- }
- else
- {
- status = LM_NVRAM_WriteBlockUnBuffered(pDevice, offset, data, size);
- }
-
- value32 = REG_RD(pDevice, Grc.Mode);
- value32 &= ~GRC_MODE_NVRAM_WRITE_ENABLE;
- REG_WR(pDevice, Grc.Mode, value32);
-
- if( pDevice->Flags & EEPROM_WP_FLAG )
- {
- REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
- REG_RD_BACK(pDevice, Grc.LocalCtrl);
- MM_Wait(40);
- }
-
-error:
-
- if(T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- if( (pDevice->Flags & PROTECTED_NVRAM_FLAG) == 0)
- {
- value32 = REG_RD(pDevice, Nvram.NvmAccess);
- value32 &= ~(NVRAM_ACCESS_ENABLE | NVRAM_ACCESS_WRITE_ENABLE);
- REG_WR(pDevice, Nvram.NvmAccess, value32);
- }
- }
-
- LM_NVRAM_ReleaseLock( pDevice );
- }
-
- return status;
-} /* LM_NVRAM_WriteBlock */
-
-
-LM_STATUS LM_NvramWriteBlock( PLM_DEVICE_BLOCK pDevice, LM_UINT32 offset,
- LM_UINT32 * data, LM_UINT32 size )
-{
- /* BCM4785: Avoid all access to NVRAM & EEPROM. */
- if (pDevice->Flags & SB_CORE_FLAG)
- return LM_STATUS_FAILURE;
-
- return LM_NVRAM_WriteBlock( pDevice, offset, (LM_UINT8 *)data, size * 4 );
-}
-
-#endif /* ETHTOOL_SEEPROM */
-
-
-static int
-bcm_ether_atoe(char *p, struct ether_addr *ea)
-{
- int i = 0;
-
- for (;;) {
- ea->octet[i++] = (char) simple_strtoul(p, &p, 16);
- if (!*p++ || i == 6)
- break;
- }
-
- return (i == 6);
-}
-
-/******************************************************************************/
-/* Description: */
-/* This routine initializes default parameters and reads the PCI */
-/* configurations. */
-/* */
-/* Return: */
-/* LM_STATUS_SUCCESS */
-/******************************************************************************/
-LM_STATUS
-LM_GetAdapterInfo(
-PLM_DEVICE_BLOCK pDevice)
-{
- PLM_ADAPTER_INFO pAdapterInfo;
- LM_UINT32 Value32, LedCfg, Ver;
- LM_STATUS Status;
- LM_UINT32 EeSigFound;
- LM_UINT32 EePhyTypeSerdes = 0;
- LM_UINT32 EePhyId = 0;
-
- /* Get Device Id and Vendor Id */
- Status = MM_ReadConfig32(pDevice, PCI_VENDOR_ID_REG, &Value32);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- }
- pDevice->PciVendorId = (LM_UINT16) Value32;
- pDevice->PciDeviceId = (LM_UINT16) (Value32 >> 16);
-
- Status = MM_ReadConfig32(pDevice, PCI_REV_ID_REG, &Value32);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- }
- pDevice->PciRevId = (LM_UINT8) Value32;
-
- /* Get chip revision id. */
- Status = MM_ReadConfig32(pDevice, T3_PCI_MISC_HOST_CTRL_REG, &Value32);
- pDevice->ChipRevId = Value32 >> 16;
-
- /* determine if it is PCIE system */
- if( (Value32 = MM_FindCapability(pDevice, T3_PCIE_CAPABILITY_ID)) != 0)
- {
- pDevice->Flags |= PCI_EXPRESS_FLAG;
- }
-
- /* Get subsystem vendor. */
- Status = MM_ReadConfig32(pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG, &Value32);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- }
- pDevice->SubsystemVendorId = (LM_UINT16) Value32;
-
- /* Get PCI subsystem id. */
- pDevice->SubsystemId = (LM_UINT16) (Value32 >> 16);
-
- /* Read bond id for baxter A0 since it has same rev id as hamilton A0*/
-
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5714_A0) {
- MM_WriteConfig32(pDevice, T3_PCI_MISC_HOST_CTRL_REG, Value32 | MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS);
-
- Value32 = LM_RegRdInd(pDevice, 0x6804);
- Value32 &= GRC_MISC_BD_ID_MASK;
-
- if((Value32 == 0)||(Value32 == 0x8000)) {
- pDevice->ChipRevId = T3_CHIP_ID_5752_A0;
- }else{
- pDevice->ChipRevId = T3_CHIP_ID_5714_A0;
- }
-
- Status = MM_ReadConfig32(pDevice, T3_PCI_MISC_HOST_CTRL_REG, &Value32);
- MM_WriteConfig32(pDevice, T3_PCI_MISC_HOST_CTRL_REG, Value32 & ~ MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS);
- }
-
-
- /* Get the cache line size. */
- MM_ReadConfig32(pDevice, PCI_CACHE_LINE_SIZE_REG, &Value32);
- pDevice->CacheLineSize = (LM_UINT8) Value32;
- pDevice->SavedCacheLineReg = Value32;
-
- if(pDevice->ChipRevId != T3_CHIP_ID_5703_A1 &&
- pDevice->ChipRevId != T3_CHIP_ID_5703_A2 &&
- pDevice->ChipRevId != T3_CHIP_ID_5704_A0)
- {
- pDevice->Flags &= ~UNDI_FIX_FLAG;
- }
-#ifndef PCIX_TARGET_WORKAROUND
- pDevice->Flags &= ~UNDI_FIX_FLAG;
-#endif
- /* Map the memory base to system address space. */
- if (!(pDevice->Flags & UNDI_FIX_FLAG))
- {
- Status = MM_MapMemBase(pDevice);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- }
- /* Initialize the memory view pointer. */
- pDevice->pMemView = (PT3_STD_MEM_MAP) pDevice->pMappedMemBase;
- }
-
- if ((T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) ||
- (T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5704_AX))
- {
- pDevice->Flags |= TX_4G_WORKAROUND_FLAG;
- }
- if ( (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) ||
- (pDevice->Flags == PCI_EXPRESS_FLAG))
- {
- pDevice->Flags |= REG_RD_BACK_FLAG;
- }
-
- if(pDevice->ChipRevId==T3_CHIP_ID_5750_A0)
- return LM_STATUS_UNKNOWN_ADAPTER;
-
-#ifdef PCIX_TARGET_WORKAROUND
- MM_ReadConfig32(pDevice, T3_PCI_STATE_REG, &Value32);
- if((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0)
- {
- if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX)
- {
- pDevice->Flags |= ENABLE_PCIX_FIX_FLAG;
- }
- }
- if (pDevice->Flags & UNDI_FIX_FLAG)
- {
- pDevice->Flags |= ENABLE_PCIX_FIX_FLAG;
- }
-#endif
- /* Bx bug: due to the "byte_enable bug" in PCI-X mode, the power */
- /* management register may be clobbered which may cause the */
- /* BCM5700 to go into D3 state. While in this state, we will */
- /* need to restore the device to D0 state. */
- MM_ReadConfig32(pDevice, T3_PCI_PM_STATUS_CTRL_REG, &Value32);
- Value32 |= T3_PM_PME_ASSERTED;
- Value32 &= ~T3_PM_POWER_STATE_MASK;
- Value32 |= T3_PM_POWER_STATE_D0;
- MM_WriteConfig32(pDevice, T3_PCI_PM_STATUS_CTRL_REG, Value32);
-
- /* read the current PCI command word */
- MM_ReadConfig32(pDevice, PCI_COMMAND_REG, &Value32);
-
- /* Make sure bus-mastering is enabled. */
- Value32 |= PCI_BUSMASTER_ENABLE;
-
-#ifdef PCIX_TARGET_WORKAROUND
- /* if we are in PCI-X mode, also make sure mem-mapping and SERR#/PERR#
- are enabled */
- if (pDevice->Flags & ENABLE_PCIX_FIX_FLAG) {
- Value32 |= (PCI_MEM_SPACE_ENABLE | PCI_SYSTEM_ERROR_ENABLE |
- PCI_PARITY_ERROR_ENABLE);
- }
- if (pDevice->Flags & UNDI_FIX_FLAG)
- {
- Value32 &= ~PCI_MEM_SPACE_ENABLE;
- }
-
-#endif
-
- if (pDevice->Flags & ENABLE_MWI_FLAG)
- {
- Value32 |= PCI_MEMORY_WRITE_INVALIDATE;
- }
- else {
- Value32 &= (~PCI_MEMORY_WRITE_INVALIDATE);
- }
-
- /* save the value we are going to write into the PCI command word */
- pDevice->PciCommandStatusWords = Value32;
-
- Status = MM_WriteConfig32(pDevice, PCI_COMMAND_REG, Value32);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- }
-
- /* Setup the mode registers. */
- pDevice->MiscHostCtrl =
- MISC_HOST_CTRL_MASK_PCI_INT |
- MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP |
-#ifdef BIG_ENDIAN_HOST
- MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP |
-#endif /* BIG_ENDIAN_HOST */
- MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS |
- MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW;
- /* write to PCI misc host ctr first in order to enable indirect accesses */
- MM_WriteConfig32(pDevice, T3_PCI_MISC_HOST_CTRL_REG, pDevice->MiscHostCtrl);
-
- /* Set power state to D0. */
- LM_SetPowerState(pDevice, LM_POWER_STATE_D0);
-
- /* Preserve HOST_STACK_UP bit in case ASF firmware is running */
- Value32 = REG_RD(pDevice, Grc.Mode) & GRC_MODE_HOST_STACK_UP;
-#ifdef BIG_ENDIAN_HOST
- Value32 |= GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
- GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
-#else
- Value32 |= GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA;
-#endif
- REG_WR(pDevice, Grc.Mode, Value32);
-
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- REG_WR(pDevice, Grc.LocalCtrl, GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1);
- REG_RD_BACK(pDevice, Grc.LocalCtrl);
- }
- MM_Wait(40);
-
- /* Enable memory arbiter*/
- if(T3_ASIC_5714_FAMILY(pDevice->ChipRevId) )
- {
- Value32 = REG_RD(pDevice,MemArbiter.Mode);
- REG_WR(pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE | Value32);
- }
- else
- {
- REG_WR(pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE);
- }
-
-
- LM_SwitchClocks(pDevice);
-
- REG_WR(pDevice, PciCfg.MemWindowBaseAddr, 0);
-
- /* Check to see if PXE ran and did not shutdown properly */
- if ((REG_RD(pDevice, DmaWrite.Mode) & DMA_WRITE_MODE_ENABLE) ||
- !(REG_RD(pDevice, PciCfg.MiscHostCtrl) & MISC_HOST_CTRL_MASK_PCI_INT))
- {
- LM_DisableInterrupt(pDevice);
- /* assume ASF is enabled */
- pDevice->AsfFlags = ASF_ENABLED;
- if (T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- pDevice->AsfFlags |= ASF_NEW_HANDSHAKE;
- }
- LM_ShutdownChip(pDevice, LM_SHUTDOWN_RESET);
- pDevice->AsfFlags = 0;
- }
-#ifdef PCIX_TARGET_WORKAROUND
- MM_ReadConfig32(pDevice, T3_PCI_STATE_REG, &Value32);
- if (!(pDevice->Flags & ENABLE_PCIX_FIX_FLAG) &&
- ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0))
- {
- if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B2 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B5)
- {
- MM_MEMWRITEL(&(pDevice->pMemView->uIntMem.MemBlock32K[0x300]), 0);
- MM_MEMWRITEL(&(pDevice->pMemView->uIntMem.MemBlock32K[0x301]), 0);
- MM_MEMWRITEL(&(pDevice->pMemView->uIntMem.MemBlock32K[0x301]),
- 0xffffffff);
- if (MM_MEMREADL(&(pDevice->pMemView->uIntMem.MemBlock32K[0x300])))
- {
- pDevice->Flags |= ENABLE_PCIX_FIX_FLAG;
- }
- }
- }
-#endif
-
- LM_NVRAM_Init(pDevice);
-
- Status = LM_STATUS_FAILURE;
-
- /* BCM4785: Use the MAC address stored in the main flash. */
- if (pDevice->Flags & SB_CORE_FLAG) {
- bcm_ether_atoe(getvar(NULL, "et0macaddr"), (struct ether_addr *)pDevice->NodeAddress);
- Status = LM_STATUS_SUCCESS;
- } else {
- /* Get the node address. First try to get in from the shared memory. */
- /* If the signature is not present, then get it from the NVRAM. */
- Value32 = MEM_RD_OFFSET(pDevice, T3_MAC_ADDR_HIGH_MAILBOX);
- if((Value32 >> 16) == 0x484b)
- {
- int i;
-
- pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 8);
- pDevice->NodeAddress[1] = (LM_UINT8) Value32;
-
- Value32 = MEM_RD_OFFSET(pDevice, T3_MAC_ADDR_LOW_MAILBOX);
-
- pDevice->NodeAddress[2] = (LM_UINT8) (Value32 >> 24);
- pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 16);
- pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 8);
- pDevice->NodeAddress[5] = (LM_UINT8) Value32;
-
- /* Check for null MAC address which can happen with older boot code */
- for (i = 0; i < 6; i++)
- {
- if (pDevice->NodeAddress[i] != 0)
- {
- Status = LM_STATUS_SUCCESS;
- break;
- }
- }
- }
- }
-
- if (Status != LM_STATUS_SUCCESS)
- {
- int MacOffset;
-
- MacOffset = 0x7c;
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704 ||
- (T3_ASIC_5714_FAMILY(pDevice->ChipRevId)) )
- {
- if (REG_RD(pDevice, PciCfg.DualMacCtrl) & T3_DUAL_MAC_ID)
- {
- MacOffset = 0xcc;
- }
- /* the boot code is not running */
- if (LM_NVRAM_AcquireLock(pDevice) != LM_STATUS_SUCCESS)
- {
- REG_WR(pDevice, Nvram.Cmd, NVRAM_CMD_RESET);
- }
- else
- {
- LM_NVRAM_ReleaseLock(pDevice);
- }
- }
-
- Status = LM_NvramRead(pDevice, MacOffset, &Value32);
- if(Status == LM_STATUS_SUCCESS)
- {
- LM_UINT8 *c = (LM_UINT8 *) &Value32;
-
- pDevice->NodeAddress[0] = c[2];
- pDevice->NodeAddress[1] = c[3];
-
- Status = LM_NvramRead(pDevice, MacOffset + 4, &Value32);
-
- c = (LM_UINT8 *) &Value32;
- pDevice->NodeAddress[2] = c[0];
- pDevice->NodeAddress[3] = c[1];
- pDevice->NodeAddress[4] = c[2];
- pDevice->NodeAddress[5] = c[3];
- }
- }
-
- if(Status != LM_STATUS_SUCCESS)
- {
- Value32 = REG_RD(pDevice, MacCtrl.MacAddr[0].High);
- pDevice->NodeAddress[0] = (Value32 >> 8) & 0xff;
- pDevice->NodeAddress[1] = Value32 & 0xff;
- Value32 = REG_RD(pDevice, MacCtrl.MacAddr[0].Low);
- pDevice->NodeAddress[2] = (Value32 >> 24) & 0xff;
- pDevice->NodeAddress[3] = (Value32 >> 16) & 0xff;
- pDevice->NodeAddress[4] = (Value32 >> 8) & 0xff;
- pDevice->NodeAddress[5] = Value32 & 0xff;
- B57_ERR(("WARNING: Cannot get MAC addr from NVRAM, using %2.2x%2.2x%2.2x%2.2x%2.2x%2.2x\n",
- pDevice->NodeAddress[0], pDevice->NodeAddress[1],
- pDevice->NodeAddress[2], pDevice->NodeAddress[3],
- pDevice->NodeAddress[4], pDevice->NodeAddress[5]));
- }
-
- memcpy(pDevice->PermanentNodeAddress, pDevice->NodeAddress, 6);
-
- /* Initialize the default values. */
- pDevice->TxPacketDescCnt = DEFAULT_TX_PACKET_DESC_COUNT;
- pDevice->RxStdDescCnt = DEFAULT_STD_RCV_DESC_COUNT;
- pDevice->RxCoalescingTicks = DEFAULT_RX_COALESCING_TICKS;
- pDevice->TxCoalescingTicks = DEFAULT_TX_COALESCING_TICKS;
- pDevice->RxMaxCoalescedFrames = DEFAULT_RX_MAX_COALESCED_FRAMES;
- pDevice->TxMaxCoalescedFrames = DEFAULT_TX_MAX_COALESCED_FRAMES;
- pDevice->RxCoalescingTicksDuringInt = BAD_DEFAULT_VALUE;
- pDevice->TxCoalescingTicksDuringInt = BAD_DEFAULT_VALUE;
- pDevice->RxMaxCoalescedFramesDuringInt = BAD_DEFAULT_VALUE;
- pDevice->TxMaxCoalescedFramesDuringInt = BAD_DEFAULT_VALUE;
- pDevice->StatsCoalescingTicks = DEFAULT_STATS_COALESCING_TICKS;
- pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
- pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
- pDevice->DisableAutoNeg = FALSE;
- pDevice->PhyIntMode = T3_PHY_INT_MODE_AUTO;
- pDevice->LinkChngMode = T3_LINK_CHNG_MODE_AUTO;
-
- pDevice->PhyFlags = 0;
-
- if (!(pDevice->Flags & PCI_EXPRESS_FLAG))
- pDevice->Flags |= DELAY_PCI_GRANT_FLAG;
-
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_AUTO;
- pDevice->TaskOffloadCap = LM_TASK_OFFLOAD_NONE;
- pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
- pDevice->FlowControlCap = LM_FLOW_CONTROL_AUTO_PAUSE;
-#ifdef INCLUDE_TBI_SUPPORT
- pDevice->TbiFlags = 0;
- pDevice->IgnoreTbiLinkChange = FALSE;
-#endif
-#ifdef INCLUDE_TCP_SEG_SUPPORT
- pDevice->LargeSendMaxSize = T3_TCP_SEG_MAX_OFFLOAD_SIZE;
- pDevice->LargeSendMinNumSeg = T3_TCP_SEG_MIN_NUM_SEG;
-#endif
-
- if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704) ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705))
- {
- pDevice->PhyFlags |= PHY_RESET_ON_LINKDOWN;
- pDevice->PhyFlags |= PHY_CHECK_TAPS_AFTER_RESET;
- }
- if ((T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5703_AX) ||
- (T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5704_AX))
- {
- pDevice->PhyFlags |= PHY_ADC_FIX;
- }
- if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
- {
- pDevice->PhyFlags |= PHY_5704_A0_FIX;
- }
- if (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- pDevice->PhyFlags |= PHY_5705_5750_FIX;
- }
- /* Ethernet@Wirespeed is supported on 5701,5702,5703,5704,5705a0,5705a1 */
- if ((T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700) &&
- !((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705) &&
- (pDevice->ChipRevId != T3_CHIP_ID_5705_A0) &&
- (pDevice->ChipRevId != T3_CHIP_ID_5705_A1)))
- {
- pDevice->PhyFlags |= PHY_ETHERNET_WIRESPEED;
- }
-
- switch (T3_ASIC_REV(pDevice->ChipRevId))
- {
- case T3_ASIC_REV_5704:
- pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR;
- pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE64;
- break;
- default:
- pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR;
- pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE96;
- break;
- }
-
- pDevice->LinkStatus = LM_STATUS_LINK_DOWN;
- pDevice->QueueRxPackets = TRUE;
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-
- if(T3_ASIC_IS_JUMBO_CAPABLE(pDevice->ChipRevId)){
- if( ! T3_ASIC_5714_FAMILY(pDevice->ChipRevId))
- pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT;
- pDevice->Flags |= JUMBO_CAPABLE_FLAG;
- }
-
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
- pDevice->BondId = REG_RD(pDevice, Grc.MiscCfg) & GRC_MISC_BD_ID_MASK;
-
- if(((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) &&
- ((pDevice->BondId == 0x10000) || (pDevice->BondId == 0x18000))) ||
- ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) &&
- ((pDevice->BondId == 0x14000) || (pDevice->BondId == 0x1c000))))
- {
- return LM_STATUS_UNKNOWN_ADAPTER;
- }
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703)
- {
- if ((pDevice->BondId == 0x8000) || (pDevice->BondId == 0x4000))
- {
- pDevice->PhyFlags |= PHY_NO_GIGABIT;
- }
- }
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705)
- {
- if ((pDevice->BondId == GRC_MISC_BD_ID_5788) ||
- (pDevice->BondId == GRC_MISC_BD_ID_5788M))
- {
- pDevice->Flags |= BCM5788_FLAG;
- }
-
- if ((pDevice->PciDeviceId == T3_PCI_DEVICE_ID(T3_PCI_ID_BCM5901)) ||
- (pDevice->PciDeviceId == T3_PCI_DEVICE_ID(T3_PCI_ID_BCM5901A2)) ||
- (pDevice->PciDeviceId == T3_PCI_DEVICE_ID(T3_PCI_ID_BCM5705F)))
- {
- pDevice->PhyFlags |= PHY_NO_GIGABIT;
- }
- }
-
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5750)
- {
- if ( (pDevice->PciDeviceId == T3_PCI_DEVICE_ID(T3_PCI_ID_BCM5751F))||
- (pDevice->PciDeviceId == T3_PCI_DEVICE_ID(T3_PCI_ID_BCM5753F)))
- {
- pDevice->PhyFlags |= PHY_NO_GIGABIT;
- }
- }
-
- /* CIOBE multisplit has a bug */
-
- /* Get Eeprom info. */
- Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_SIG_ADDR);
- if (Value32 == T3_NIC_DATA_SIG)
- {
- EeSigFound = TRUE;
- Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_NIC_CFG_ADDR);
-
- /* For now the 5753 cannot drive gpio2 or ASF will blow */
- if(Value32 & T3_NIC_GPIO2_NOT_AVAILABLE)
- {
- pDevice->Flags |= GPIO2_DONOT_OUTPUT;
- }
-
- if (Value32 & T3_NIC_MINI_PCI)
- {
- pDevice->Flags |= MINI_PCI_FLAG;
- }
- /* Determine PHY type. */
- switch (Value32 & T3_NIC_CFG_PHY_TYPE_MASK)
- {
- case T3_NIC_CFG_PHY_TYPE_COPPER:
- EePhyTypeSerdes = FALSE;
- break;
-
- case T3_NIC_CFG_PHY_TYPE_FIBER:
- EePhyTypeSerdes = TRUE;
- break;
-
- default:
- EePhyTypeSerdes = FALSE;
- break;
- }
-
- if ( T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- LedCfg = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_NIC_CFG_ADDR2);
- LedCfg = LedCfg & (T3_NIC_CFG_LED_MODE_MASK |
- T3_SHASTA_EXT_LED_MODE_MASK);
- }
- else
- {
- /* Determine PHY led mode. for legacy devices */
- LedCfg = Value32 & T3_NIC_CFG_LED_MODE_MASK;
- }
-
- switch (LedCfg)
- {
- default:
- case T3_NIC_CFG_LED_PHY_MODE_1:
- pDevice->LedCtrl = LED_CTRL_PHY_MODE_1;
- break;
-
- case T3_NIC_CFG_LED_PHY_MODE_2:
- pDevice->LedCtrl = LED_CTRL_PHY_MODE_2;
- break;
-
- case T3_NIC_CFG_LED_MAC_MODE:
- pDevice->LedCtrl = LED_CTRL_MAC_MODE;
- break;
-
- case T3_SHASTA_EXT_LED_SHARED_TRAFFIC_LINK_MODE:
- pDevice->LedCtrl = LED_CTRL_SHARED_TRAFFIC_LINK;
- if ((pDevice->ChipRevId != T3_CHIP_ID_5750_A0) &&
- (pDevice->ChipRevId != T3_CHIP_ID_5750_A1))
- {
- pDevice->LedCtrl |= LED_CTRL_PHY_MODE_1 |
- LED_CTRL_PHY_MODE_2;
- }
- break;
-
- case T3_SHASTA_EXT_LED_MAC_MODE:
- pDevice->LedCtrl = LED_CTRL_SHASTA_MAC_MODE;
- break;
-
- case T3_SHASTA_EXT_LED_WIRELESS_COMBO_MODE:
- pDevice->LedCtrl = LED_CTRL_WIRELESS_COMBO;
- if (pDevice->ChipRevId != T3_CHIP_ID_5750_A0)
- {
- pDevice->LedCtrl |= LED_CTRL_PHY_MODE_1 |
- LED_CTRL_PHY_MODE_2;
- }
- break;
-
- }
-
- if (((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)) &&
- (pDevice->SubsystemVendorId == T3_SVID_DELL))
- {
- pDevice->LedCtrl = LED_CTRL_PHY_MODE_2;
- }
-
- if((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704) ||
- (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId)) )
- {
- /* Enable EEPROM write protection. */
- if(Value32 & T3_NIC_EEPROM_WP)
- {
- pDevice->Flags |= EEPROM_WP_FLAG;
- }
- }
- pDevice->AsfFlags = 0;
-#ifdef BCM_ASF
- if (Value32 & T3_NIC_CFG_ENABLE_ASF)
- {
- pDevice->AsfFlags |= ASF_ENABLED;
- if (T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- pDevice->AsfFlags |= ASF_NEW_HANDSHAKE;
- }
- }
-#endif
- if (Value32 & T3_NIC_FIBER_WOL_CAPABLE)
- {
- pDevice->Flags |= FIBER_WOL_CAPABLE_FLAG;
- }
- if (Value32 & T3_NIC_WOL_LIMIT_10)
- {
- pDevice->Flags |= WOL_LIMIT_10MBPS_FLAG;
- }
-
- /* Get the PHY Id. */
- Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_PHY_ID_ADDR);
- if (Value32)
- {
- EePhyId = (((Value32 & T3_NIC_PHY_ID1_MASK) >> 16) &
- PHY_ID1_OUI_MASK) << 10;
-
- Value32 = Value32 & T3_NIC_PHY_ID2_MASK;
-
- EePhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) |
- (Value32 & PHY_ID2_MODEL_MASK) | (Value32 & PHY_ID2_REV_MASK);
- }
- else
- {
- EePhyId = 0;
- if (!EePhyTypeSerdes && !(pDevice->AsfFlags & ASF_ENABLED))
- {
- /* reset PHY if boot code couldn't read the PHY ID */
- LM_ResetPhy(pDevice);
- }
- }
-
- Ver = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_VER);
- Ver >>= T3_NIC_DATA_VER_SHIFT;
-
- Value32 = 0;
- if((T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700) &&
- (T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701) &&
- (T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5703) &&
- (Ver > 0) && (Ver < 0x100)){
-
- Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_NIC_CFG_ADDR2);
-
- if (Value32 & T3_NIC_CFG_CAPACITIVE_COUPLING)
- {
- pDevice->PhyFlags |= PHY_CAPACITIVE_COUPLING;
- }
-
- if (Value32 & T3_NIC_CFG_PRESERVE_PREEMPHASIS)
- {
- pDevice->TbiFlags |= TBI_DO_PREEMPHASIS;
- }
-
- }
-
- }
- else
- {
- EeSigFound = FALSE;
- }
-
- /* Set the PHY address. */
- pDevice->PhyAddr = PHY_DEVICE_ID;
-
- /* Disable auto polling. */
- pDevice->MiMode = 0xc0000;
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
- REG_RD_BACK(pDevice, MacCtrl.MiMode);
- MM_Wait(80);
-
- if (pDevice->AsfFlags & ASF_ENABLED)
- {
- /* Reading PHY registers will contend with ASF */
- pDevice->PhyId = 0;
- }
- else
- {
- /* Get the PHY id. */
- LM_GetPhyId(pDevice);
- }
-
- /* Set the EnableTbi flag to false if we have a copper PHY. */
- switch(pDevice->PhyId & PHY_ID_MASK)
- {
- case PHY_BCM5400_PHY_ID:
- case PHY_BCM5401_PHY_ID:
- case PHY_BCM5411_PHY_ID:
- case PHY_BCM5461_PHY_ID:
- case PHY_BCM5701_PHY_ID:
- case PHY_BCM5703_PHY_ID:
- case PHY_BCM5704_PHY_ID:
- case PHY_BCM5705_PHY_ID:
- case PHY_BCM5750_PHY_ID:
- break;
- case PHY_BCM5714_PHY_ID:
- case PHY_BCM5780_PHY_ID:
- if(EePhyTypeSerdes == TRUE)
- {
- pDevice->PhyFlags |= PHY_IS_FIBER;
- }
- break;
- case PHY_BCM5752_PHY_ID:
- break;
-
- case PHY_BCM8002_PHY_ID:
- pDevice->TbiFlags |= ENABLE_TBI_FLAG;
- break;
-
- default:
-
- if (EeSigFound)
- {
- pDevice->PhyId = EePhyId;
-
- if (EePhyTypeSerdes && ((pDevice->PhyId == PHY_BCM5780_PHY_ID)) )
- {
- pDevice->PhyFlags |= PHY_IS_FIBER;
- }
- else if (EePhyTypeSerdes)
- {
- pDevice->TbiFlags |= ENABLE_TBI_FLAG;
- }
- }
- else if ((pAdapterInfo = LM_GetAdapterInfoBySsid(
- pDevice->SubsystemVendorId,
- pDevice->SubsystemId)))
- {
- pDevice->PhyId = pAdapterInfo->PhyId;
- if (pAdapterInfo->Serdes)
- {
- pDevice->TbiFlags |= ENABLE_TBI_FLAG;
- }
- }
- else
- {
- if (UNKNOWN_PHY_ID(pDevice->PhyId))
- {
- LM_ResetPhy(pDevice);
- LM_GetPhyId(pDevice);
- }
- }
- break;
- }
-
- if(UNKNOWN_PHY_ID(pDevice->PhyId) &&
- !(pDevice->TbiFlags & ENABLE_TBI_FLAG))
- {
- if (pDevice->Flags & ROBO_SWITCH_FLAG) {
- B57_ERR(("PHY ID unknown, assume it is a copper PHY.\n"));
- } else {
- pDevice->TbiFlags |= ENABLE_TBI_FLAG;
- B57_ERR(("PHY ID unknown, assume it is SerDes\n"));
- }
- }
-
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703)
- {
- if((pDevice->SavedCacheLineReg & 0xff00) < 0x4000)
- {
- pDevice->SavedCacheLineReg &= 0xffff00ff;
- pDevice->SavedCacheLineReg |= 0x4000;
- }
- }
-
- pDevice->ReceiveMask = LM_ACCEPT_MULTICAST | LM_ACCEPT_BROADCAST |
- LM_ACCEPT_UNICAST;
-
- pDevice->TaskOffloadCap = LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
- LM_TASK_OFFLOAD_TX_UDP_CHECKSUM | LM_TASK_OFFLOAD_RX_TCP_CHECKSUM |
- LM_TASK_OFFLOAD_RX_UDP_CHECKSUM;
-
- if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0)
- {
- pDevice->TaskOffloadCap &= ~(LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
- LM_TASK_OFFLOAD_TX_UDP_CHECKSUM);
- }
-
-#ifdef INCLUDE_TCP_SEG_SUPPORT
- pDevice->TaskOffloadCap |= LM_TASK_OFFLOAD_TCP_SEGMENTATION;
-
- if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) ||
- (pDevice->ChipRevId == T3_CHIP_ID_5705_A0))
- {
- pDevice->TaskOffloadCap &= ~LM_TASK_OFFLOAD_TCP_SEGMENTATION;
- }
-#endif
-
-#ifdef BCM_ASF
- if (pDevice->AsfFlags & ASF_ENABLED)
- {
- if (!T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- pDevice->TaskOffloadCap &= ~LM_TASK_OFFLOAD_TCP_SEGMENTATION;
- }
- }
-#endif
-
- /* Change driver parameters. */
- Status = MM_GetConfig(pDevice);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- }
-
- if (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- pDevice->Flags &= ~NIC_SEND_BD_FLAG;
- }
-
- /* Save the current phy link status. */
- if (!(pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
- !(pDevice->AsfFlags & ASF_ENABLED))
- {
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
-
- /* If we don't have link reset the PHY. */
- if(!(Value32 & PHY_STATUS_LINK_PASS) ||
- (pDevice->PhyFlags & PHY_RESET_ON_INIT))
- {
-
- LM_ResetPhy(pDevice);
-
- if (LM_PhyAdvertiseAll(pDevice) != LM_STATUS_SUCCESS)
- {
- Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD |
- PHY_AN_AD_ALL_SPEEDS;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
-
- if(!(pDevice->PhyFlags & PHY_NO_GIGABIT))
- Value32 = BCM540X_AN_AD_ALL_1G_SPEEDS ;
- else
- Value32 =0;
-
-#ifdef INCLUDE_5701_AX_FIX
- if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
- {
- Value32 |= BCM540X_CONFIG_AS_MASTER |
- BCM540X_ENABLE_CONFIG_AS_MASTER;
- }
-#endif
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
-
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE |
- PHY_CTRL_RESTART_AUTO_NEG);
- }
-
- }
- LM_SetEthWireSpeed(pDevice);
-
- LM_ReadPhy(pDevice, PHY_AN_AD_REG, &pDevice->advertising);
- LM_ReadPhy(pDevice, BCM540X_1000BASET_CTRL_REG,
- &pDevice->advertising1000);
-
- }
- /* Currently 5401 phy only */
- LM_PhyTapPowerMgmt(pDevice);
-
-#ifdef INCLUDE_TBI_SUPPORT
- if(pDevice->TbiFlags & ENABLE_TBI_FLAG)
- {
- if (!(pDevice->Flags & FIBER_WOL_CAPABLE_FLAG))
- {
- pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_NONE;
- }
- pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY;
- if (pDevice->TbiFlags & TBI_PURE_POLLING_FLAG)
- {
- pDevice->IgnoreTbiLinkChange = TRUE;
- }
- }
- else
- {
- pDevice->TbiFlags = 0;
- }
-
-#endif /* INCLUDE_TBI_SUPPORT */
-
- /* UseTaggedStatus is only valid for 5701 and later. */
- if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) ||
- ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705) &&
- ((pDevice->BondId == GRC_MISC_BD_ID_5788) ||
- (pDevice->BondId == GRC_MISC_BD_ID_5788M))))
- {
- pDevice->Flags &= ~USE_TAGGED_STATUS_FLAG;
- pDevice->CoalesceMode = 0;
- }
- else
- {
- pDevice->CoalesceMode = HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT |
- HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT;
- }
-
- /* Set the status block size. */
- if(T3_CHIP_REV(pDevice->ChipRevId) != T3_CHIP_REV_5700_AX &&
- T3_CHIP_REV(pDevice->ChipRevId) != T3_CHIP_REV_5700_BX)
- {
- pDevice->CoalesceMode |= HOST_COALESCE_32_BYTE_STATUS_MODE;
- }
-
- /* Check the DURING_INT coalescing ticks parameters. */
- if (pDevice->Flags & USE_TAGGED_STATUS_FLAG)
- {
- if(pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->RxCoalescingTicksDuringInt =
- DEFAULT_RX_COALESCING_TICKS_DURING_INT;
- }
-
- if(pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->TxCoalescingTicksDuringInt =
- DEFAULT_TX_COALESCING_TICKS_DURING_INT;
- }
-
- if(pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->RxMaxCoalescedFramesDuringInt =
- DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT;
- }
-
- if(pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->TxMaxCoalescedFramesDuringInt =
- DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT;
- }
- }
- else
- {
- if(pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->RxCoalescingTicksDuringInt = 0;
- }
-
- if(pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->TxCoalescingTicksDuringInt = 0;
- }
-
- if(pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->RxMaxCoalescedFramesDuringInt = 0;
- }
-
- if(pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE)
- {
- pDevice->TxMaxCoalescedFramesDuringInt = 0;
- }
- }
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- if(pDevice->RxMtu <= (MAX_STD_RCV_BUFFER_SIZE - 8 /* CRC */))
- {
- pDevice->RxJumboDescCnt = 0;
- if(pDevice->RxMtu <= MAX_ETHERNET_PACKET_SIZE_NO_CRC)
- {
- pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
- }
- }
- else if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705)
- {
- pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
- pDevice->RxJumboDescCnt = 0;
- }
- else
- {
- pDevice->RxJumboBufferSize = (pDevice->RxMtu + 8 /* CRC + VLAN */ +
- COMMON_CACHE_LINE_SIZE-1) & ~COMMON_CACHE_LINE_MASK;
-
- if(pDevice->RxJumboBufferSize > MAX_JUMBO_RCV_BUFFER_SIZE)
- {
- pDevice->RxJumboBufferSize = DEFAULT_JUMBO_RCV_BUFFER_SIZE;
- pDevice->RxMtu = pDevice->RxJumboBufferSize - 8 /* CRC + VLAN */;
- }
- pDevice->TxMtu = pDevice->RxMtu;
- }
-#else
- pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
- pDevice->RxPacketDescCnt =
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- pDevice->RxJumboDescCnt +
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
- pDevice->RxStdDescCnt;
-
- if(pDevice->TxMtu < MAX_ETHERNET_PACKET_SIZE_NO_CRC)
- {
- pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
- }
-
- if(pDevice->TxMtu > MAX_JUMBO_TX_BUFFER_SIZE)
- {
- pDevice->TxMtu = MAX_JUMBO_TX_BUFFER_SIZE;
- }
-
- /* Configure the proper ways to get link change interrupt. */
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO)
- {
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
- }
- else
- {
- pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY;
- }
- }
- else if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
- {
- /* Auto-polling does not work on 5700_AX and 5700_BX. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
- }
- }
-
- /* Determine the method to get link change status. */
- if(pDevice->LinkChngMode == T3_LINK_CHNG_MODE_AUTO)
- {
- /* The link status bit in the status block does not work on 5700_AX */
- /* and 5700_BX chips. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
- }
- else
- {
- pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_BLOCK;
- }
- }
-
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
- }
-
- if (!EeSigFound)
- {
- pDevice->LedCtrl = LED_CTRL_PHY_MODE_1;
- }
-
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- /* bug? 5701 in LINK10 mode does not seem to work when */
- /* PhyIntMode is LINK_READY. */
- if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
-#ifdef INCLUDE_TBI_SUPPORT
- !(pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
-#endif
- pDevice->LedCtrl == LED_CTRL_PHY_MODE_2)
- {
- pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
- pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
- }
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- {
- pDevice->LedCtrl = LED_CTRL_PHY_MODE_1;
- }
- }
-
-#ifdef BCM_WOL
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B2)
- {
- pDevice->WolSpeed = WOL_SPEED_10MB;
- }
- else
- {
- if (pDevice->Flags & WOL_LIMIT_10MBPS_FLAG)
- {
- pDevice->WolSpeed = WOL_SPEED_10MB;
- }
- else
- {
- pDevice->WolSpeed = WOL_SPEED_100MB;
- }
- }
-#endif
-
- pDevice->PciState = REG_RD(pDevice, PciCfg.PciState);
-
- pDevice->DmaReadFifoSize = 0;
- if (((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705) &&
- (pDevice->ChipRevId != T3_CHIP_ID_5705_A0)) ||
- T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId) )
- {
-#ifdef INCLUDE_TCP_SEG_SUPPORT
- if ((pDevice->TaskToOffload & LM_TASK_OFFLOAD_TCP_SEGMENTATION) &&
- ((pDevice->ChipRevId == T3_CHIP_ID_5705_A1) ||
- (pDevice->ChipRevId == T3_CHIP_ID_5705_A2)))
- {
- pDevice->DmaReadFifoSize = DMA_READ_MODE_FIFO_SIZE_128;
- }
- else
-#endif
- {
- if (!(pDevice->PciState & T3_PCI_STATE_HIGH_BUS_SPEED) &&
- !(pDevice->Flags & BCM5788_FLAG) &&
- !(pDevice->Flags & PCI_EXPRESS_FLAG))
- {
- pDevice->DmaReadFifoSize = DMA_READ_MODE_FIFO_LONG_BURST;
- if (pDevice->ChipRevId == T3_CHIP_ID_5705_A1)
- {
- pDevice->Flags |= RX_BD_LIMIT_64_FLAG;
- }
- pDevice->Flags |= DMA_WR_MODE_RX_ACCELERATE_FLAG;
- }
- else if (pDevice->Flags & PCI_EXPRESS_FLAG)
- {
- pDevice->DmaReadFifoSize = DMA_READ_MODE_FIFO_LONG_BURST;
- }
- }
- }
-
- pDevice->Flags &= ~T3_HAS_TWO_CPUS;
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704)
- {
- pDevice->Flags |= T3_HAS_TWO_CPUS;
- }
-
- return LM_STATUS_SUCCESS;
-} /* LM_GetAdapterInfo */
-
-STATIC PLM_ADAPTER_INFO
-LM_GetAdapterInfoBySsid(
- LM_UINT16 Svid,
- LM_UINT16 Ssid)
-{
- static LM_ADAPTER_INFO AdapterArr[] =
- {
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A6, PHY_BCM5401_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A5, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700T6, PHY_BCM8002_PHY_ID, 1},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A9, 0, 1 },
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T1, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T8, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A7, 0, 1},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A10, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A12, PHY_BCM5701_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax1, PHY_BCM5703_PHY_ID, 0},
- { T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax2, PHY_BCM5703_PHY_ID, 0},
-
- { T3_SVID_3COM, T3_SSID_3COM_3C996T, PHY_BCM5401_PHY_ID, 0 },
- { T3_SVID_3COM, T3_SSID_3COM_3C996BT, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_3COM, T3_SSID_3COM_3C996SX, 0, 1 },
- { T3_SVID_3COM, T3_SSID_3COM_3C1000T, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_3COM, T3_SSID_3COM_3C940BR01, PHY_BCM5701_PHY_ID, 0 },
-
- { T3_SVID_DELL, T3_SSID_DELL_VIPER, PHY_BCM5401_PHY_ID, 0 },
- { T3_SVID_DELL, T3_SSID_DELL_JAGUAR, PHY_BCM5401_PHY_ID, 0 },
- { T3_SVID_DELL, T3_SSID_DELL_MERLOT, PHY_BCM5411_PHY_ID, 0 },
- { T3_SVID_DELL, T3_SSID_DELL_SLIM_MERLOT, PHY_BCM5411_PHY_ID, 0 },
-
- { T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE_2, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_COMPAQ, T3_SSID_COMPAQ_CHANGELING, 0, 1 },
- { T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780, PHY_BCM5701_PHY_ID, 0 },
- { T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780_2, PHY_BCM5701_PHY_ID, 0 },
-
- { 0x1014, 0x0281, 0, 1 },
- };
- LM_UINT32 j;
-
- for(j = 0; j < sizeof(AdapterArr)/sizeof(LM_ADAPTER_INFO); j++)
- {
- if(AdapterArr[j].Svid == Svid && AdapterArr[j].Ssid == Ssid)
- {
- return &AdapterArr[j];
- }
- }
-
- return NULL;
-}
-
-
-
-/******************************************************************************/
-/* Description: */
-/* This routine sets up receive/transmit buffer descriptions queues. */
-/* */
-/* Return: */
-/* LM_STATUS_SUCCESS */
-/******************************************************************************/
-LM_STATUS
-LM_InitializeAdapter(
-PLM_DEVICE_BLOCK pDevice)
-{
- LM_PHYSICAL_ADDRESS MemPhy;
- PLM_UINT8 pMemVirt;
- PLM_PACKET pPacket;
- LM_STATUS Status;
- LM_UINT32 Size;
- LM_UINT32 Value32, j;
- LM_UINT32 DmaWrCmd, DmaRdCmd, DmaWrBdry, DmaRdBdry;
-
- MM_ReadConfig32(pDevice, PCI_COMMAND_REG, &Value32);
- j = 0;
- while (((Value32 & 0x3ff) != (pDevice->PciCommandStatusWords & 0x3ff)) &&
- (j < 1000))
- {
- /* On PCIE devices, there are some rare cases where the device */
- /* is in the process of link-training at this point */
- MM_Wait(200);
- MM_WriteConfig32(pDevice, PCI_COMMAND_REG, pDevice->PciCommandStatusWords);
- MM_ReadConfig32(pDevice, PCI_COMMAND_REG, &Value32);
- j++;
- }
- MM_WriteConfig32(pDevice, T3_PCI_MISC_HOST_CTRL_REG, pDevice->MiscHostCtrl);
- /* Set power state to D0. */
- LM_SetPowerState(pDevice, LM_POWER_STATE_D0);
-
- /* Intialize the queues. */
- QQ_InitQueue(&pDevice->RxPacketReceivedQ.Container,
- MAX_RX_PACKET_DESC_COUNT);
- QQ_InitQueue(&pDevice->RxPacketFreeQ.Container,
- MAX_RX_PACKET_DESC_COUNT);
-
- QQ_InitQueue(&pDevice->TxPacketFreeQ.Container,MAX_TX_PACKET_DESC_COUNT);
- QQ_InitQueue(&pDevice->TxPacketXmittedQ.Container,MAX_TX_PACKET_DESC_COUNT);
-
- if(T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId) )
- {
- pDevice->RcvRetRcbEntryCount = 512;
- pDevice->RcvRetRcbEntryCountMask = 511;
- }
- else
- {
- pDevice->RcvRetRcbEntryCount = T3_RCV_RETURN_RCB_ENTRY_COUNT;
- pDevice->RcvRetRcbEntryCountMask = T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK;
- }
-
- /* Allocate shared memory for: status block, the buffers for receive */
- /* rings -- standard, mini, jumbo, and return rings. */
- Size = T3_STATUS_BLOCK_SIZE + sizeof(T3_STATS_BLOCK) +
- T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD) +
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD) +
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
- (pDevice->RcvRetRcbEntryCount * sizeof(T3_RCV_BD));
-
- /* Memory for host based Send BD. */
- if (!(pDevice->Flags & NIC_SEND_BD_FLAG))
- {
- Size += sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT;
- }
-
- /* Allocate the memory block. */
- Status = MM_AllocateSharedMemory(pDevice, Size, (PLM_VOID) &pMemVirt, &MemPhy, FALSE);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- }
-
- DmaWrCmd = DMA_CTRL_WRITE_CMD;
- DmaRdCmd = DMA_CTRL_READ_CMD;
- DmaWrBdry = DMA_CTRL_WRITE_BOUNDARY_DISABLE;
- DmaRdBdry = DMA_CTRL_READ_BOUNDARY_DISABLE;
-#ifdef BCM_DISCONNECT_AT_CACHELINE
- /* This code is intended for PPC64 and other similar architectures */
- /* Only the following chips support this */
- if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) ||
- (pDevice->Flags & PCI_EXPRESS_FLAG))
- {
- switch(pDevice->CacheLineSize * 4)
- {
- case 16:
- case 32:
- case 64:
- case 128:
- if (!(pDevice->PciState & T3_PCI_STATE_NOT_PCI_X_BUS) &&
- !(pDevice->Flags & PCI_EXPRESS_FLAG))
- {
- /* PCI-X */
- /* use 384 which is a multiple of 16,32,64,128 */
- DmaWrBdry = DMA_CTRL_WRITE_BOUNDARY_384_PCIX;
- break;
- }
- else if (pDevice->Flags & PCI_EXPRESS_FLAG)
- {
- /* PCI Express */
- /* use 128 which is a multiple of 16,32,64,128 */
- DmaWrCmd = DMA_CTRL_WRITE_BOUNDARY_128_PCIE;
- break;
- }
- /* fall through */
- case 256:
- /* use 256 which is a multiple of 16,32,64,128,256 */
- if ((pDevice->PciState & T3_PCI_STATE_NOT_PCI_X_BUS) &&
- !(pDevice->Flags & PCI_EXPRESS_FLAG))
- {
- /* PCI */
- DmaWrBdry = DMA_CTRL_WRITE_BOUNDARY_256;
- }
- else if (!(pDevice->Flags & PCI_EXPRESS_FLAG))
- {
- /* PCI-X */
- DmaWrBdry = DMA_CTRL_WRITE_BOUNDARY_256_PCIX;
- }
- break;
- }
- }
-#endif
- pDevice->DmaReadWriteCtrl = DmaWrCmd | DmaRdCmd | DmaWrBdry | DmaRdBdry;
- /* Program DMA Read/Write */
- if (pDevice->Flags & PCI_EXPRESS_FLAG)
- {
-
- /* !=0 is 256 max or greater payload size so set water mark accordingly*/
- Value32 = (REG_RD(pDevice, PciCfg.DeviceCtrl) & MAX_PAYLOAD_SIZE_MASK);
- if (Value32)
- {
- pDevice->DmaReadWriteCtrl |= DMA_CTRL_WRITE_PCIE_H20MARK_256;
- }else
- {
- pDevice->DmaReadWriteCtrl |= DMA_CTRL_WRITE_PCIE_H20MARK_128;
- }
-
- }
- else if (pDevice->PciState & T3_PCI_STATE_NOT_PCI_X_BUS)
- {
- if(T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- pDevice->DmaReadWriteCtrl |= 0x003f0000;
- }
- else
- {
- pDevice->DmaReadWriteCtrl |= 0x003f000f;
- }
- }
- else /* pci-x */
- {
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704)
- {
- pDevice->DmaReadWriteCtrl |= 0x009f0000;
- }
-
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703)
- {
- pDevice->DmaReadWriteCtrl |= 0x009C0000;
- }
-
- if( T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703 )
- {
- Value32 = REG_RD(pDevice, PciCfg.ClockCtrl) & 0x1f;
- if ((Value32 == 0x6) || (Value32 == 0x7))
- {
- pDevice->Flags |= ONE_DMA_AT_ONCE_FLAG;
- }
- }
- else if(T3_ASIC_5714_FAMILY(pDevice->ChipRevId) )
- {
- pDevice->DmaReadWriteCtrl &= ~DMA_CTRL_WRITE_ONE_DMA_AT_ONCE;
- if( T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5780)
- pDevice->DmaReadWriteCtrl |= (BIT_20 | BIT_18 | DMA_CTRL_WRITE_ONE_DMA_AT_ONCE);
- else
- pDevice->DmaReadWriteCtrl |= (BIT_20 | BIT_18 | BIT_15);
- /* bit 15 is the current CQ 13140 Fix */
- }
- else
- {
- pDevice->DmaReadWriteCtrl |= 0x001b000f;
- }
- }
- if((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704))
- {
- pDevice->DmaReadWriteCtrl &= 0xfffffff0;
- }
-
- if (pDevice->Flags & ONE_DMA_AT_ONCE_FLAG)
- {
- pDevice->DmaReadWriteCtrl |= DMA_CTRL_WRITE_ONE_DMA_AT_ONCE;
- }
-
- REG_WR(pDevice, PciCfg.DmaReadWriteCtrl, pDevice->DmaReadWriteCtrl);
-
- LM_SwitchClocks(pDevice);
-
- if (LM_DmaTest(pDevice, pMemVirt, MemPhy, 0x400) != LM_STATUS_SUCCESS)
- {
- return LM_STATUS_FAILURE;
- }
-
- /* Status block. */
- pDevice->pStatusBlkVirt = (PT3_STATUS_BLOCK) pMemVirt;
- pDevice->StatusBlkPhy = MemPhy;
- pMemVirt += T3_STATUS_BLOCK_SIZE;
- LM_INC_PHYSICAL_ADDRESS(&MemPhy, T3_STATUS_BLOCK_SIZE);
-
- /* Statistics block. */
- pDevice->pStatsBlkVirt = (PT3_STATS_BLOCK) pMemVirt;
- pDevice->StatsBlkPhy = MemPhy;
- pMemVirt += sizeof(T3_STATS_BLOCK);
- LM_INC_PHYSICAL_ADDRESS(&MemPhy, sizeof(T3_STATS_BLOCK));
-
- /* Receive standard BD buffer. */
- pDevice->pRxStdBdVirt = (PT3_RCV_BD) pMemVirt;
- pDevice->RxStdBdPhy = MemPhy;
-
- pMemVirt += T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD);
- LM_INC_PHYSICAL_ADDRESS(&MemPhy,
- T3_STD_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD));
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- /* Receive jumbo BD buffer. */
- pDevice->pRxJumboBdVirt = (PT3_RCV_BD) pMemVirt;
- pDevice->RxJumboBdPhy = MemPhy;
-
- pMemVirt += T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD);
- LM_INC_PHYSICAL_ADDRESS(&MemPhy,
- T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof(T3_RCV_BD));
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
- /* Receive return BD buffer. */
- pDevice->pRcvRetBdVirt = (PT3_RCV_BD) pMemVirt;
- pDevice->RcvRetBdPhy = MemPhy;
-
- pMemVirt += pDevice->RcvRetRcbEntryCount * sizeof(T3_RCV_BD);
- LM_INC_PHYSICAL_ADDRESS(&MemPhy,
- pDevice->RcvRetRcbEntryCount * sizeof(T3_RCV_BD));
-
- /* Set up Send BD. */
- if (!(pDevice->Flags & NIC_SEND_BD_FLAG))
- {
- pDevice->pSendBdVirt = (PT3_SND_BD) pMemVirt;
- pDevice->SendBdPhy = MemPhy;
-
- pMemVirt += sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT;
- LM_INC_PHYSICAL_ADDRESS(&MemPhy,
- sizeof(T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT);
- }
-#ifdef BCM_NIC_SEND_BD
- else
- {
- pDevice->pSendBdVirt = (PT3_SND_BD)
- pDevice->pMemView->uIntMem.First32k.BufferDesc;
- pDevice->SendBdPhy.High = 0;
- pDevice->SendBdPhy.Low = T3_NIC_SND_BUFFER_DESC_ADDR;
- }
-#endif
-
- /* Allocate memory for packet descriptors. */
- Size = (pDevice->RxPacketDescCnt +
- pDevice->TxPacketDescCnt) * MM_PACKET_DESC_SIZE;
- Status = MM_AllocateMemory(pDevice, Size, (PLM_VOID *) &pPacket);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- }
- pDevice->pPacketDescBase = (PLM_VOID) pPacket;
-
- /* Create transmit packet descriptors from the memory block and add them */
- /* to the TxPacketFreeQ for each send ring. */
- for(j = 0; j < pDevice->TxPacketDescCnt; j++)
- {
- /* Ring index. */
- pPacket->Flags = 0;
-
- /* Queue the descriptor in the TxPacketFreeQ of the 'k' ring. */
- QQ_PushTail(&pDevice->TxPacketFreeQ.Container, pPacket);
-
- /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
- /* is the total size of the packet descriptor including the */
- /* os-specific extensions in the UM_PACKET structure. */
- pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
- } /* for(j.. */
-
- /* Create receive packet descriptors from the memory block and add them */
- /* to the RxPacketFreeQ. Create the Standard packet descriptors. */
- for(j = 0; j < pDevice->RxStdDescCnt; j++)
- {
- /* Receive producer ring. */
- pPacket->u.Rx.RcvProdRing = T3_STD_RCV_PROD_RING;
-
- /* Receive buffer size. */
- if (T3_ASIC_5714_FAMILY(pDevice->ChipRevId) &&
- (pDevice->RxJumboBufferSize) )
- {
- pPacket->u.Rx.RxBufferSize = pDevice->RxJumboBufferSize;
- }else{
- pPacket->u.Rx.RxBufferSize = MAX_STD_RCV_BUFFER_SIZE;
- }
-
- /* Add the descriptor to RxPacketFreeQ. */
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
-
- /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
- /* is the total size of the packet descriptor including the */
- /* os-specific extensions in the UM_PACKET structure. */
- pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
- } /* for */
-
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- /* Create the Jumbo packet descriptors. */
- for(j = 0; j < pDevice->RxJumboDescCnt; j++)
- {
- /* Receive producer ring. */
- pPacket->u.Rx.RcvProdRing = T3_JUMBO_RCV_PROD_RING;
-
- /* Receive buffer size. */
- pPacket->u.Rx.RxBufferSize = pDevice->RxJumboBufferSize;
-
- /* Add the descriptor to RxPacketFreeQ. */
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
-
- /* Get the pointer to the next descriptor. MM_PACKET_DESC_SIZE */
- /* is the total size of the packet descriptor including the */
- /* os-specific extensions in the UM_PACKET structure. */
- pPacket = (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
- } /* for */
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
- /* Initialize the rest of the packet descriptors. */
- Status = MM_InitializeUmPackets(pDevice);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- } /* if */
-
- /* Default receive mask. */
- pDevice->ReceiveMask &= LM_KEEP_VLAN_TAG;
- pDevice->ReceiveMask |= LM_ACCEPT_MULTICAST | LM_ACCEPT_BROADCAST |
- LM_ACCEPT_UNICAST;
-
- /* Make sure we are in the first 32k memory window or NicSendBd. */
- REG_WR(pDevice, PciCfg.MemWindowBaseAddr, 0);
-
- /* Initialize the hardware. */
- Status = LM_ResetAdapter(pDevice);
- if(Status != LM_STATUS_SUCCESS)
- {
- return Status;
- }
-
- /* We are done with initialization. */
- pDevice->InitDone = TRUE;
-
- return LM_STATUS_SUCCESS;
-} /* LM_InitializeAdapter */
-
-
-LM_STATUS
-LM_DisableChip(PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 data;
-
- pDevice->RxMode &= ~RX_MODE_ENABLE;
- REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
- if(!(REG_RD(pDevice, MacCtrl.RxMode) & RX_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, RcvBdIn.Mode);
- data &= ~RCV_BD_IN_MODE_ENABLE;
- REG_WR(pDevice, RcvBdIn.Mode,data);
- if(!(REG_RD(pDevice, RcvBdIn.Mode) & RCV_BD_IN_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, RcvListPlmt.Mode);
- data &= ~RCV_LIST_PLMT_MODE_ENABLE;
- REG_WR(pDevice, RcvListPlmt.Mode,data);
- if(!(REG_RD(pDevice, RcvListPlmt.Mode) & RCV_LIST_PLMT_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- data = REG_RD(pDevice, RcvListSel.Mode);
- data &= ~RCV_LIST_SEL_MODE_ENABLE;
- REG_WR(pDevice, RcvListSel.Mode,data);
- if(!(REG_RD(pDevice, RcvListSel.Mode) & RCV_LIST_SEL_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- }
- data = REG_RD(pDevice, RcvDataBdIn.Mode);
- data &= ~RCV_DATA_BD_IN_MODE_ENABLE;
- REG_WR(pDevice, RcvDataBdIn.Mode,data);
- if(!(REG_RD(pDevice, RcvDataBdIn.Mode) & RCV_DATA_BD_IN_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, RcvDataComp.Mode);
- data &= ~RCV_DATA_COMP_MODE_ENABLE;
- REG_WR(pDevice, RcvDataComp.Mode,data);
- if(!(REG_RD(pDevice, RcvDataBdIn.Mode) & RCV_DATA_COMP_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, RcvBdComp.Mode);
- data &= ~RCV_BD_COMP_MODE_ENABLE;
- REG_WR(pDevice, RcvBdComp.Mode,data);
- if(!(REG_RD(pDevice, RcvBdComp.Mode) & RCV_BD_COMP_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, SndBdSel.Mode);
- data &= ~SND_BD_SEL_MODE_ENABLE;
- REG_WR(pDevice, SndBdSel.Mode, data);
- if(!(REG_RD(pDevice, SndBdSel.Mode) & SND_BD_SEL_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, SndBdIn.Mode);
- data &= ~SND_BD_IN_MODE_ENABLE;
- REG_WR(pDevice, SndBdIn.Mode, data);
- if(!(REG_RD(pDevice, SndBdIn.Mode) & SND_BD_IN_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, SndDataIn.Mode);
- data &= ~T3_SND_DATA_IN_MODE_ENABLE;
- REG_WR(pDevice, SndDataIn.Mode,data);
- if(!(REG_RD(pDevice, SndDataIn.Mode) & T3_SND_DATA_IN_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, DmaRead.Mode);
- data &= ~DMA_READ_MODE_ENABLE;
- REG_WR(pDevice, DmaRead.Mode, data);
- if(!(REG_RD(pDevice, DmaRead.Mode) & DMA_READ_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, SndDataComp.Mode);
- data &= ~SND_DATA_COMP_MODE_ENABLE;
- REG_WR(pDevice, SndDataComp.Mode, data);
- if(!(REG_RD(pDevice, SndDataComp.Mode) & SND_DATA_COMP_MODE_ENABLE))
- {
- MM_Wait(20);
- }
-
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- data = REG_RD(pDevice,DmaComp.Mode);
- data &= ~DMA_COMP_MODE_ENABLE;
- REG_WR(pDevice, DmaComp.Mode, data);
- if(!(REG_RD(pDevice, DmaComp.Mode) & DMA_COMP_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- }
- data = REG_RD(pDevice, SndBdComp.Mode);
- data &= ~SND_BD_COMP_MODE_ENABLE;
- REG_WR(pDevice, SndBdComp.Mode, data);
- if(!(REG_RD(pDevice, SndBdComp.Mode) & SND_BD_COMP_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- /* Clear TDE bit */
- pDevice->MacMode &= ~MAC_MODE_ENABLE_TDE;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- pDevice->TxMode &= ~TX_MODE_ENABLE;
- REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode);
- if(!(REG_RD(pDevice, MacCtrl.TxMode) & TX_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, HostCoalesce.Mode);
- data &= ~HOST_COALESCE_ENABLE;
- REG_WR(pDevice, HostCoalesce.Mode, data);
- if(!(REG_RD(pDevice, SndBdIn.Mode) & HOST_COALESCE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, DmaWrite.Mode);
- data &= ~DMA_WRITE_MODE_ENABLE;
- REG_WR(pDevice, DmaWrite.Mode,data);
- if(!(REG_RD(pDevice, DmaWrite.Mode) & DMA_WRITE_MODE_ENABLE))
- {
- MM_Wait(20);
- }
-
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- data = REG_RD(pDevice, MbufClusterFree.Mode);
- data &= ~MBUF_CLUSTER_FREE_MODE_ENABLE;
- REG_WR(pDevice, MbufClusterFree.Mode,data);
- if(!(REG_RD(pDevice, MbufClusterFree.Mode) & MBUF_CLUSTER_FREE_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- }
- /* Reset all FTQs */
- REG_WR(pDevice, Ftq.Reset, 0xffffffff);
- REG_WR(pDevice, Ftq.Reset, 0x0);
-
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- data = REG_RD(pDevice, BufMgr.Mode);
- data &= ~BUFMGR_MODE_ENABLE;
- REG_WR(pDevice, BufMgr.Mode,data);
- if(!(REG_RD(pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- data = REG_RD(pDevice, MemArbiter.Mode);
- data &= ~T3_MEM_ARBITER_MODE_ENABLE;
- REG_WR(pDevice, MemArbiter.Mode, data);
- if(!(REG_RD(pDevice, MemArbiter.Mode) & T3_MEM_ARBITER_MODE_ENABLE))
- {
- MM_Wait(20);
- }
- }
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-LM_DisableFW(PLM_DEVICE_BLOCK pDevice)
-{
-#ifdef BCM_ASF
- int j;
- LM_UINT32 Value32;
-
- if (pDevice->AsfFlags & ASF_ENABLED)
- {
- MEM_WR_OFFSET(pDevice, T3_CMD_MAILBOX, T3_CMD_NICDRV_PAUSE_FW);
- Value32 = REG_RD(pDevice, Grc.RxCpuEvent);
- REG_WR(pDevice, Grc.RxCpuEvent, Value32 | BIT_14);
- for (j = 0; j < 100; j++)
- {
- Value32 = REG_RD(pDevice, Grc.RxCpuEvent);
- if (!(Value32 & BIT_14))
- {
- break;
- }
- MM_Wait(1);
- }
- }
-#endif
- return LM_STATUS_SUCCESS;
-}
-
-/******************************************************************************/
-/* Description: */
-/* This function reinitializes the adapter. */
-/* */
-/* Return: */
-/* LM_STATUS_SUCCESS */
-/******************************************************************************/
-LM_STATUS
-LM_ResetAdapter(
-PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 Value32;
- LM_UINT32 j, k;
- int reset_count = 0;
-
- /* Disable interrupt. */
- LM_DisableInterrupt(pDevice);
-
-restart_reset:
- LM_DisableFW(pDevice);
-
- /* May get a spurious interrupt */
- pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED;
-
- LM_WritePreResetSignatures(pDevice, LM_INIT_RESET);
- /* Disable transmit and receive DMA engines. Abort all pending requests. */
- if(pDevice->InitDone)
- {
- LM_Abort(pDevice);
- }
-
- pDevice->ShuttingDown = FALSE;
-
- LM_ResetChip(pDevice);
-
- LM_WriteLegacySignatures(pDevice, LM_INIT_RESET);
-
- /* Bug: Athlon fix for B3 silicon only. This bit does not do anything */
- /* in other chip revisions except 5750 */
- if ((pDevice->Flags & DELAY_PCI_GRANT_FLAG) &&
- !(pDevice->Flags & PCI_EXPRESS_FLAG))
- {
- REG_WR(pDevice, PciCfg.ClockCtrl, pDevice->ClockCtrl | BIT_31);
- }
-
- if(pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
- {
- if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
- {
- Value32 = REG_RD(pDevice, PciCfg.PciState);
- Value32 |= T3_PCI_STATE_RETRY_SAME_DMA;
- REG_WR(pDevice, PciCfg.PciState, Value32);
- }
- }
- if (T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5704_BX)
- {
- /* New bits defined in register 0x64 to enable some h/w fixes */
- /* These new bits are 'write-only' */
- Value32 = REG_RD(pDevice, PciCfg.MsiData);
- REG_WR(pDevice, PciCfg.MsiData, Value32 | BIT_26 | BIT_28 | BIT_29);
- }
-
- /* Enable TaggedStatus mode. */
- if (pDevice->Flags & USE_TAGGED_STATUS_FLAG)
- {
- pDevice->MiscHostCtrl |= MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE;
- }
-
- /* Restore PCI configuration registers. */
- MM_WriteConfig32(pDevice, PCI_CACHE_LINE_SIZE_REG,
- pDevice->SavedCacheLineReg);
- MM_WriteConfig32(pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG,
- (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId);
-
- /* Initialize the statistis Block */
- pDevice->pStatusBlkVirt->Status = 0;
- pDevice->pStatusBlkVirt->RcvStdConIdx = 0;
- pDevice->pStatusBlkVirt->RcvJumboConIdx = 0;
- pDevice->pStatusBlkVirt->RcvMiniConIdx = 0;
-
- for(j = 0; j < 16; j++)
- {
- pDevice->pStatusBlkVirt->Idx[j].RcvProdIdx = 0;
- pDevice->pStatusBlkVirt->Idx[j].SendConIdx = 0;
- }
-
- for(k = 0; k < T3_STD_RCV_RCB_ENTRY_COUNT ;k++)
- {
- pDevice->pRxStdBdVirt[k].HostAddr.High = 0;
- pDevice->pRxStdBdVirt[k].HostAddr.Low = 0;
- pDevice->pRxStdBdVirt[k].Flags = RCV_BD_FLAG_END;
- if(T3_ASIC_5714_FAMILY(pDevice->ChipRevId) &&
- (pDevice->RxJumboBufferSize) )
- pDevice->pRxStdBdVirt[k].Len = pDevice->RxJumboBufferSize;
- else
- pDevice->pRxStdBdVirt[k].Len = MAX_STD_RCV_BUFFER_SIZE;
- }
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- /* Receive jumbo BD buffer. */
- for(k = 0; k < T3_JUMBO_RCV_RCB_ENTRY_COUNT; k++)
- {
- pDevice->pRxJumboBdVirt[k].HostAddr.High = 0;
- pDevice->pRxJumboBdVirt[k].HostAddr.Low = 0;
- pDevice->pRxJumboBdVirt[k].Flags = RCV_BD_FLAG_END |
- RCV_BD_FLAG_JUMBO_RING;
- pDevice->pRxJumboBdVirt[k].Len = (LM_UINT16) pDevice->RxJumboBufferSize;
- }
-#endif
-
- REG_WR(pDevice, PciCfg.DmaReadWriteCtrl, pDevice->DmaReadWriteCtrl);
-
- /* GRC mode control register. */
- Value32 =
-#ifdef BIG_ENDIAN_HOST
- GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
- GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
- GRC_MODE_BYTE_SWAP_DATA |
- GRC_MODE_WORD_SWAP_DATA |
-#else
- GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
- GRC_MODE_BYTE_SWAP_DATA |
- GRC_MODE_WORD_SWAP_DATA |
-#endif
- GRC_MODE_INT_ON_MAC_ATTN |
- GRC_MODE_HOST_STACK_UP;
-
- /* Configure send BD mode. */
- if (!(pDevice->Flags & NIC_SEND_BD_FLAG))
- {
- Value32 |= GRC_MODE_HOST_SEND_BDS;
- }
-#ifdef BCM_NIC_SEND_BD
- else
- {
- Value32 |= GRC_MODE_4X_NIC_BASED_SEND_RINGS;
- }
-#endif
-
- /* Configure pseudo checksum mode. */
- if (pDevice->Flags & NO_TX_PSEUDO_HDR_CSUM_FLAG)
- {
- Value32 |= GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM;
- }
-
- if (pDevice->Flags & NO_RX_PSEUDO_HDR_CSUM_FLAG)
- {
- Value32 |= GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM;
- }
-
- pDevice->GrcMode = Value32;
- REG_WR(pDevice, Grc.Mode, Value32);
-
- /* Setup the timer prescalar register. */
- Value32 = REG_RD(pDevice, Grc.MiscCfg) & ~0xff;
- /* Clock is always 66Mhz. */
- REG_WR(pDevice, Grc.MiscCfg, Value32 | (65 << 1));
-
- /* Set up the MBUF pool base address and size. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705)
- {
-#ifdef INCLUDE_TCP_SEG_SUPPORT
- if (pDevice->TaskToOffload & LM_TASK_OFFLOAD_TCP_SEGMENTATION)
- {
- Value32 = LM_GetStkOffLdFirmwareSize(pDevice);
- Value32 = (Value32 + 0x7f) & ~0x7f;
- pDevice->MbufBase = T3_NIC_BCM5705_MBUF_POOL_ADDR + Value32;
- pDevice->MbufSize = T3_NIC_BCM5705_MBUF_POOL_SIZE - Value32 - 0xa00;
- REG_WR(pDevice, BufMgr.MbufPoolAddr, pDevice->MbufBase);
- REG_WR(pDevice, BufMgr.MbufPoolSize, pDevice->MbufSize);
- }
-#endif
- }
- else if (!T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- REG_WR(pDevice, BufMgr.MbufPoolAddr, pDevice->MbufBase);
- REG_WR(pDevice, BufMgr.MbufPoolSize, pDevice->MbufSize);
-
- /* Set up the DMA descriptor pool base address and size. */
- REG_WR(pDevice, BufMgr.DmaDescPoolAddr, T3_NIC_DMA_DESC_POOL_ADDR);
- REG_WR(pDevice, BufMgr.DmaDescPoolSize, T3_NIC_DMA_DESC_POOL_SIZE);
-
- }
-
- /* Configure MBUF and Threshold watermarks */
- /* Configure the DMA read MBUF low water mark. */
- if(pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE)
- {
- if(T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark,
- T3_DEF_DMA_MBUF_LOW_WMARK_5705);
- REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark,
- T3_DEF_RX_MAC_MBUF_LOW_WMARK_5705);
- REG_WR(pDevice, BufMgr.MbufHighWaterMark,
- T3_DEF_MBUF_HIGH_WMARK_5705);
- }
- else
- {
- REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark,
- T3_DEF_DMA_MBUF_LOW_WMARK);
- REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark,
- T3_DEF_RX_MAC_MBUF_LOW_WMARK);
- REG_WR(pDevice, BufMgr.MbufHighWaterMark,
- T3_DEF_MBUF_HIGH_WMARK);
- }
- }else if( T3_ASIC_5714_FAMILY(pDevice->ChipRevId)){
-
- REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark,0);
- REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark,0x4b);
- REG_WR(pDevice, BufMgr.MbufHighWaterMark,0x96);
- }
- else
- {
- REG_WR(pDevice, BufMgr.MbufReadDmaLowWaterMark,
- T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO);
- REG_WR(pDevice, BufMgr.MbufMacRxLowWaterMark,
- T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO);
- REG_WR(pDevice, BufMgr.MbufHighWaterMark,
- T3_DEF_MBUF_HIGH_WMARK_JUMBO);
- }
-
- REG_WR(pDevice, BufMgr.DmaLowWaterMark, T3_DEF_DMA_DESC_LOW_WMARK);
- REG_WR(pDevice, BufMgr.DmaHighWaterMark, T3_DEF_DMA_DESC_HIGH_WMARK);
-
- /* Enable buffer manager. */
- REG_WR(pDevice, BufMgr.Mode, BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE);
-
- for(j = 0 ;j < 2000; j++)
- {
- if(REG_RD(pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE)
- break;
- MM_Wait(10);
- }
-
- if(j >= 2000)
- {
- return LM_STATUS_FAILURE;
- }
-
-/* GRC reset will reset FTQ */
-
- /* Receive BD Ring replenish threshold. */
- REG_WR(pDevice, RcvBdIn.StdRcvThreshold, pDevice->RxStdDescCnt/8);
-
- /* Initialize the Standard Receive RCB. */
- REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.High,
- pDevice->RxStdBdPhy.High);
- REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.Low,
- pDevice->RxStdBdPhy.Low);
- REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.NicRingAddr,
- (LM_UINT32) T3_NIC_STD_RCV_BUFFER_DESC_ADDR);
-
- if(T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.u.MaxLen_Flags,
- 512 << 16);
- }
- else
- {
- REG_WR(pDevice, RcvDataBdIn.StdRcvRcb.u.MaxLen_Flags,
- MAX_STD_RCV_BUFFER_SIZE << 16);
-
- /* Initialize the Jumbo Receive RCB. */
- REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags,
- T3_RCB_FLAG_RING_DISABLED);
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.High,
- pDevice->RxJumboBdPhy.High);
- REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.Low,
- pDevice->RxJumboBdPhy.Low);
- REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags, 0);
- REG_WR(pDevice, RcvDataBdIn.JumboRcvRcb.NicRingAddr,
- (LM_UINT32) T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR);
-
- REG_WR(pDevice, RcvBdIn.JumboRcvThreshold, pDevice->RxJumboDescCnt/8);
-
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
- /* Initialize the Mini Receive RCB. */
- REG_WR(pDevice, RcvDataBdIn.MiniRcvRcb.u.MaxLen_Flags,
- T3_RCB_FLAG_RING_DISABLED);
-
- /* Disable all the unused rings. */
- for(j = 0; j < T3_MAX_SEND_RCB_COUNT; j++) {
- MEM_WR(pDevice, SendRcb[j].u.MaxLen_Flags,
- T3_RCB_FLAG_RING_DISABLED);
- } /* for */
-
- }
-
- /* Initialize the indices. */
- pDevice->SendProdIdx = 0;
- pDevice->SendConIdx = 0;
-
- MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, 0);
- MB_REG_RD(pDevice, Mailbox.SendHostProdIdx[0].Low);
- MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, 0);
- MB_REG_RD(pDevice, Mailbox.SendNicProdIdx[0].Low);
-
- /* Set up host or NIC based send RCB. */
- if (!(pDevice->Flags & NIC_SEND_BD_FLAG))
- {
- MEM_WR(pDevice, SendRcb[0].HostRingAddr.High,
- pDevice->SendBdPhy.High);
- MEM_WR(pDevice, SendRcb[0].HostRingAddr.Low,
- pDevice->SendBdPhy.Low);
-
- /* Setup the RCB. */
- MEM_WR(pDevice, SendRcb[0].u.MaxLen_Flags,
- T3_SEND_RCB_ENTRY_COUNT << 16);
-
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- /* Set up the NIC ring address in the RCB. */
- MEM_WR(pDevice, SendRcb[0].NicRingAddr,T3_NIC_SND_BUFFER_DESC_ADDR);
- }
- for(k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++)
- {
- pDevice->pSendBdVirt[k].HostAddr.High = 0;
- pDevice->pSendBdVirt[k].HostAddr.Low = 0;
- }
- }
-#ifdef BCM_NIC_SEND_BD
- else
- {
- MEM_WR(pDevice, SendRcb[0].HostRingAddr.High, 0);
- MEM_WR(pDevice, SendRcb[0].HostRingAddr.Low, 0);
- MEM_WR(pDevice, SendRcb[0].NicRingAddr,
- pDevice->SendBdPhy.Low);
-
- for(k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++)
- {
- MM_MEMWRITEL(&(pDevice->pSendBdVirt[k].HostAddr.High), 0);
- MM_MEMWRITEL(&(pDevice->pSendBdVirt[k].HostAddr.Low), 0);
- MM_MEMWRITEL(&(pDevice->pSendBdVirt[k].u1.Len_Flags), 0);
- pDevice->ShadowSendBd[k].HostAddr.High = 0;
- pDevice->ShadowSendBd[k].u1.Len_Flags = 0;
- }
- }
-#endif
- MM_ATOMIC_SET(&pDevice->SendBdLeft, T3_SEND_RCB_ENTRY_COUNT-1);
-
- /* Configure the receive return rings. */
- for(j = 0; j < T3_MAX_RCV_RETURN_RCB_COUNT; j++)
- {
- MEM_WR(pDevice, RcvRetRcb[j].u.MaxLen_Flags, T3_RCB_FLAG_RING_DISABLED);
- }
-
- pDevice->RcvRetConIdx = 0;
-
- MEM_WR(pDevice, RcvRetRcb[0].HostRingAddr.High,
- pDevice->RcvRetBdPhy.High);
- MEM_WR(pDevice, RcvRetRcb[0].HostRingAddr.Low,
- pDevice->RcvRetBdPhy.Low);
-
- MEM_WR(pDevice, RcvRetRcb[0].NicRingAddr, 0);
-
- /* Setup the RCB. */
- MEM_WR(pDevice, RcvRetRcb[0].u.MaxLen_Flags,
- pDevice->RcvRetRcbEntryCount << 16);
-
- /* Reinitialize RX ring producer index */
- MB_REG_WR(pDevice, Mailbox.RcvStdProdIdx.Low, 0);
- MB_REG_RD(pDevice, Mailbox.RcvStdProdIdx.Low);
- MB_REG_WR(pDevice, Mailbox.RcvJumboProdIdx.Low, 0);
- MB_REG_RD(pDevice, Mailbox.RcvJumboProdIdx.Low);
- MB_REG_WR(pDevice, Mailbox.RcvMiniProdIdx.Low, 0);
- MB_REG_RD(pDevice, Mailbox.RcvMiniProdIdx.Low);
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- pDevice->RxJumboProdIdx = 0;
- pDevice->RxJumboQueuedCnt = 0;
-#endif
-
- /* Reinitialize our copy of the indices. */
- pDevice->RxStdProdIdx = 0;
- pDevice->RxStdQueuedCnt = 0;
-
-#if T3_JUMBO_RCV_ENTRY_COUNT
- pDevice->RxJumboProdIdx = 0;
-#endif /* T3_JUMBO_RCV_ENTRY_COUNT */
-
- /* Configure the MAC address. */
- LM_SetMacAddress(pDevice, pDevice->NodeAddress);
-
- /* Initialize the transmit random backoff seed. */
- Value32 = (pDevice->NodeAddress[0] + pDevice->NodeAddress[1] +
- pDevice->NodeAddress[2] + pDevice->NodeAddress[3] +
- pDevice->NodeAddress[4] + pDevice->NodeAddress[5]) &
- MAC_TX_BACKOFF_SEED_MASK;
- REG_WR(pDevice, MacCtrl.TxBackoffSeed, Value32);
-
- /* Receive MTU. Frames larger than the MTU is marked as oversized. */
- REG_WR(pDevice, MacCtrl.MtuSize, pDevice->RxMtu + 8); /* CRC + VLAN. */
-
- /* Configure Time slot/IPG per 802.3 */
- REG_WR(pDevice, MacCtrl.TxLengths, 0x2620);
-
- /*
- * Configure Receive Rules so that packets don't match
- * Programmble rule will be queued to Return Ring 1
- */
- REG_WR(pDevice, MacCtrl.RcvRuleCfg, RX_RULE_DEFAULT_CLASS);
-
- /*
- * Configure to have 16 Classes of Services (COS) and one
- * queue per class. Bad frames are queued to RRR#1.
- * And frames don't match rules are also queued to COS#1.
- */
- REG_WR(pDevice, RcvListPlmt.Config, 0x181);
-
- /* Enable Receive Placement Statistics */
- if ((pDevice->DmaReadFifoSize == DMA_READ_MODE_FIFO_LONG_BURST) &&
- (pDevice->TaskToOffload & LM_TASK_OFFLOAD_TCP_SEGMENTATION))
- {
- Value32 = REG_RD(pDevice, RcvListPlmt.StatsEnableMask);
- Value32 &= ~T3_DISABLE_LONG_BURST_READ_DYN_FIX;
- REG_WR(pDevice, RcvListPlmt.StatsEnableMask, Value32);
- }
- else
- {
- REG_WR(pDevice, RcvListPlmt.StatsEnableMask,0xffffff);
- }
- REG_WR(pDevice, RcvListPlmt.StatsCtrl, RCV_LIST_STATS_ENABLE);
-
- /* Enable Send Data Initator Statistics */
- REG_WR(pDevice, SndDataIn.StatsEnableMask,0xffffff);
- REG_WR(pDevice, SndDataIn.StatsCtrl,
- T3_SND_DATA_IN_STATS_CTRL_ENABLE | \
- T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE);
-
- /* Disable the host coalescing state machine before configuring it's */
- /* parameters. */
- REG_WR(pDevice, HostCoalesce.Mode, 0);
- for(j = 0; j < 2000; j++)
- {
- Value32 = REG_RD(pDevice, HostCoalesce.Mode);
- if(!(Value32 & HOST_COALESCE_ENABLE))
- {
- break;
- }
- MM_Wait(10);
- }
-
- /* Host coalescing configurations. */
- REG_WR(pDevice, HostCoalesce.RxCoalescingTicks, pDevice->RxCoalescingTicks);
- REG_WR(pDevice, HostCoalesce.TxCoalescingTicks, pDevice->TxCoalescingTicks);
- REG_WR(pDevice, HostCoalesce.RxMaxCoalescedFrames,
- pDevice->RxMaxCoalescedFrames);
- REG_WR(pDevice, HostCoalesce.TxMaxCoalescedFrames,
- pDevice->TxMaxCoalescedFrames);
-
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- REG_WR(pDevice, HostCoalesce.RxCoalescedTickDuringInt,
- pDevice->RxCoalescingTicksDuringInt);
- REG_WR(pDevice, HostCoalesce.TxCoalescedTickDuringInt,
- pDevice->TxCoalescingTicksDuringInt);
- }
- REG_WR(pDevice, HostCoalesce.RxMaxCoalescedFramesDuringInt,
- pDevice->RxMaxCoalescedFramesDuringInt);
- REG_WR(pDevice, HostCoalesce.TxMaxCoalescedFramesDuringInt,
- pDevice->TxMaxCoalescedFramesDuringInt);
-
- /* Initialize the address of the status block. The NIC will DMA */
- /* the status block to this memory which resides on the host. */
- REG_WR(pDevice, HostCoalesce.StatusBlkHostAddr.High,
- pDevice->StatusBlkPhy.High);
- REG_WR(pDevice, HostCoalesce.StatusBlkHostAddr.Low,
- pDevice->StatusBlkPhy.Low);
-
- /* Initialize the address of the statistics block. The NIC will DMA */
- /* the statistics to this block of memory. */
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- REG_WR(pDevice, HostCoalesce.StatsBlkHostAddr.High,
- pDevice->StatsBlkPhy.High);
- REG_WR(pDevice, HostCoalesce.StatsBlkHostAddr.Low,
- pDevice->StatsBlkPhy.Low);
-
- REG_WR(pDevice, HostCoalesce.StatsCoalescingTicks,
- pDevice->StatsCoalescingTicks);
-
- REG_WR(pDevice, HostCoalesce.StatsBlkNicAddr, 0x300);
- REG_WR(pDevice, HostCoalesce.StatusBlkNicAddr,0xb00);
- }
-
- /* Enable Host Coalesing state machine */
- REG_WR(pDevice, HostCoalesce.Mode, HOST_COALESCE_ENABLE |
- pDevice->CoalesceMode);
-
- /* Enable the Receive BD Completion state machine. */
- REG_WR(pDevice, RcvBdComp.Mode, RCV_BD_COMP_MODE_ENABLE |
- RCV_BD_COMP_MODE_ATTN_ENABLE);
-
- /* Enable the Receive List Placement state machine. */
- REG_WR(pDevice, RcvListPlmt.Mode, RCV_LIST_PLMT_MODE_ENABLE);
-
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- /* Enable the Receive List Selector state machine. */
- REG_WR(pDevice, RcvListSel.Mode, RCV_LIST_SEL_MODE_ENABLE |
- RCV_LIST_SEL_MODE_ATTN_ENABLE);
- }
-
- /* Reset the Rx MAC State Machine.
- *
- * The Rx MAC State Machine must be reset when using fiber to prevent the
- * first packet being lost. This is needed primarily so that the loopback
- * test (which currently only sends one packet) doesn't fail.
- *
- * Also note that the Rx MAC State Machine (0x468) should be reset _before_
- * writting to the MAC Mode register (0x400). Failures have been seen on
- * 5780/5714's using fiber where they stopped receiving packets in a simple
- * ping test when the Rx MAC State Machine was reset _after_ the MAC Mode
- * register was set.
- */
-
- if ((pDevice->TbiFlags & ENABLE_TBI_FLAG) ||
- (pDevice->PhyFlags & PHY_IS_FIBER))
- {
- REG_WR(pDevice, MacCtrl.RxMode, RX_MODE_RESET);
- REG_RD_BACK(pDevice, MacCtrl.RxMode);
- MM_Wait(10);
- REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
- REG_RD_BACK(pDevice, MacCtrl.RxMode);
- }
-
- /* Clear the statistics block. */
- for(j = 0x0300; j < 0x0b00; j = j + 4)
- {
- MEM_WR_OFFSET(pDevice, j, 0);
- }
-
- /* Set Mac Mode */
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- {
- pDevice->MacMode = MAC_MODE_PORT_MODE_TBI;
- }
- else if(pDevice->PhyFlags & PHY_IS_FIBER)
- {
- pDevice->MacMode = MAC_MODE_PORT_MODE_GMII;
- }
- else
- {
- pDevice->MacMode = 0;
- }
-
- /* Enable transmit DMA, clear statistics. */
- pDevice->MacMode |= MAC_MODE_ENABLE_TX_STATISTICS |
- MAC_MODE_ENABLE_RX_STATISTICS | MAC_MODE_ENABLE_TDE |
- MAC_MODE_ENABLE_RDE | MAC_MODE_ENABLE_FHDE;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
- MAC_MODE_CLEAR_RX_STATISTICS | MAC_MODE_CLEAR_TX_STATISTICS);
-
- /* GRC miscellaneous local control register. */
- pDevice->GrcLocalCtrl = GRC_MISC_LOCAL_CTRL_INT_ON_ATTN |
- GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM;
-
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- pDevice->GrcLocalCtrl |= GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1;
- }
- else if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704) &&
- !(pDevice->Flags & EEPROM_WP_FLAG))
- {
- /* Make sure we're on Vmain */
- /* The other port may cause us to be on Vaux */
- pDevice->GrcLocalCtrl |= GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2;
- }
-
- RAW_REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl);
- MM_Wait(40);
-
- /* Reset RX counters. */
- for(j = 0; j < sizeof(LM_RX_COUNTERS); j++)
- {
- ((PLM_UINT8) &pDevice->RxCounters)[j] = 0;
- }
-
- /* Reset TX counters. */
- for(j = 0; j < sizeof(LM_TX_COUNTERS); j++)
- {
- ((PLM_UINT8) &pDevice->TxCounters)[j] = 0;
- }
-
- MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 0);
- MB_REG_RD(pDevice, Mailbox.Interrupt[0].Low);
- pDevice->LastTag = 0;
-
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- /* Enable the DMA Completion state machine. */
- REG_WR(pDevice, DmaComp.Mode, DMA_COMP_MODE_ENABLE);
- }
-
- /* Enable the DMA Write state machine. */
- Value32 = DMA_WRITE_MODE_ENABLE |
- DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE |
- DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE |
- DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE |
- DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
- DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE |
- DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
- DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE |
- DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE;
-
- if (pDevice->Flags & DMA_WR_MODE_RX_ACCELERATE_FLAG)
- {
- Value32 |= DMA_WRITE_MODE_RECEIVE_ACCELERATE;
- }
-
- if (pDevice->Flags & HOST_COALESCING_BUG_FIX)
- {
- Value32 |= (1 << 29);
- }
-
- REG_WR(pDevice, DmaWrite.Mode, Value32);
-
- if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
- {
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703)
- {
- Value32 = REG_RD(pDevice, PciCfg.PciXCapabilities);
- Value32 &= ~PCIX_CMD_MAX_BURST_MASK;
- Value32 |= PCIX_CMD_MAX_BURST_CPIOB << PCIX_CMD_MAX_BURST_SHL;
- REG_WR(pDevice, PciCfg.PciXCapabilities, Value32);
- }
- else if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704)
- {
- Value32 = REG_RD(pDevice, PciCfg.PciXCapabilities);
- Value32 &= ~(PCIX_CMD_MAX_SPLIT_MASK | PCIX_CMD_MAX_BURST_MASK);
- Value32 |= ((PCIX_CMD_MAX_BURST_CPIOB << PCIX_CMD_MAX_BURST_SHL) &
- PCIX_CMD_MAX_BURST_MASK);
- if (pDevice->Flags & MULTI_SPLIT_ENABLE_FLAG)
- {
- Value32 |= (pDevice->SplitModeMaxReq << PCIX_CMD_MAX_SPLIT_SHL)
- & PCIX_CMD_MAX_SPLIT_MASK;
- }
- REG_WR(pDevice, PciCfg.PciXCapabilities, Value32);
- }
- }
-
- /* Enable the Read DMA state machine. */
- Value32 = DMA_READ_MODE_ENABLE |
- DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE |
- DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE |
- DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE |
- DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
- DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE |
- DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
- DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE |
- DMA_READ_MODE_LONG_READ_ATTN_ENABLE;
-
- if (pDevice->Flags & MULTI_SPLIT_ENABLE_FLAG)
- {
- Value32 |= DMA_READ_MODE_MULTI_SPLIT_ENABLE;
- }
-
- if (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- Value32 |= pDevice->DmaReadFifoSize;
- }
-#ifdef INCLUDE_TCP_SEG_SUPPORT
- if (T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- Value32 |= BIT_27;
- }
-#endif
-
-
- REG_WR(pDevice, DmaRead.Mode, Value32);
-
- /* Enable the Receive Data Completion state machine. */
- REG_WR(pDevice, RcvDataComp.Mode, RCV_DATA_COMP_MODE_ENABLE |
- RCV_DATA_COMP_MODE_ATTN_ENABLE);
-
- if (!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- /* Enable the Mbuf Cluster Free state machine. */
- REG_WR(pDevice, MbufClusterFree.Mode, MBUF_CLUSTER_FREE_MODE_ENABLE);
- }
-
- /* Enable the Send Data Completion state machine. */
- REG_WR(pDevice, SndDataComp.Mode, SND_DATA_COMP_MODE_ENABLE);
-
- /* Enable the Send BD Completion state machine. */
- REG_WR(pDevice, SndBdComp.Mode, SND_BD_COMP_MODE_ENABLE |
- SND_BD_COMP_MODE_ATTN_ENABLE);
-
- /* Enable the Receive BD Initiator state machine. */
- REG_WR(pDevice, RcvBdIn.Mode, RCV_BD_IN_MODE_ENABLE |
- RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE);
-
- /* Enable the Receive Data and Receive BD Initiator state machine. */
- REG_WR(pDevice, RcvDataBdIn.Mode, RCV_DATA_BD_IN_MODE_ENABLE |
- RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE);
-
- /* Enable the Send Data Initiator state machine. */
- REG_WR(pDevice, SndDataIn.Mode, T3_SND_DATA_IN_MODE_ENABLE);
-
-#ifdef INCLUDE_TCP_SEG_SUPPORT
- if (T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- REG_WR(pDevice, SndDataIn.Mode, T3_SND_DATA_IN_MODE_ENABLE | 0x8);
- }
-#endif
-
- /* Enable the Send BD Initiator state machine. */
- REG_WR(pDevice, SndBdIn.Mode, SND_BD_IN_MODE_ENABLE |
- SND_BD_IN_MODE_ATTN_ENABLE);
-
- /* Enable the Send BD Selector state machine. */
- REG_WR(pDevice, SndBdSel.Mode, SND_BD_SEL_MODE_ENABLE |
- SND_BD_SEL_MODE_ATTN_ENABLE);
-
-#ifdef INCLUDE_5701_AX_FIX
- if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0)
- {
- LM_LoadRlsFirmware(pDevice);
- }
-#endif
-
- /* Queue Rx packet buffers. */
- if(pDevice->QueueRxPackets)
- {
- LM_QueueRxPackets(pDevice);
- }
-
- if (pDevice->ChipRevId == T3_CHIP_ID_5705_A0)
- {
- Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_STD_RCV_BUFFER_DESC_ADDR + 8);
- j = 0;
- while ((Value32 != MAX_STD_RCV_BUFFER_SIZE) && (j < 10))
- {
- MM_Wait(20);
- Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_STD_RCV_BUFFER_DESC_ADDR + 8);
- j++;
- }
- if (j >= 10)
- {
- reset_count++;
- LM_Abort(pDevice);
- if (reset_count > 5)
- return LM_STATUS_FAILURE;
- goto restart_reset;
- }
- }
-
- /* Enable the transmitter. */
- pDevice->TxMode = TX_MODE_ENABLE;
- REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode);
-
- /* Enable the receiver. */
- pDevice->RxMode = (pDevice->RxMode & RX_MODE_KEEP_VLAN_TAG) |
- RX_MODE_ENABLE;
- REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
-
-#ifdef BCM_WOL
- if (pDevice->RestoreOnWakeUp)
- {
- pDevice->RestoreOnWakeUp = FALSE;
- pDevice->DisableAutoNeg = pDevice->WakeUpDisableAutoNeg;
- pDevice->RequestedLineSpeed = pDevice->WakeUpRequestedLineSpeed;
- pDevice->RequestedDuplexMode = pDevice->WakeUpRequestedDuplexMode;
- }
-#endif
-
- /* Disable auto polling. */
- pDevice->MiMode = 0xc0000;
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
-
- REG_WR(pDevice, MacCtrl.LedCtrl, pDevice->LedCtrl);
-
- /* Activate Link to enable MAC state machine */
- REG_WR(pDevice, MacCtrl.MiStatus, MI_STATUS_ENABLE_LINK_STATUS_ATTN);
-
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- {
- if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1)
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg, 0x616000);
- }
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704)
- {
-
- if(!(pDevice->TbiFlags & TBI_DO_PREEMPHASIS))
- {
- /* Set SerDes drive transmission level to 1.2V */
- Value32 = REG_RD(pDevice, MacCtrl.SerdesCfg) & 0xfffff000;
- REG_WR(pDevice, MacCtrl.SerdesCfg, Value32 | 0x880);
- }
- }
- }
-
- REG_WR(pDevice, MacCtrl.LowWaterMarkMaxRxFrame, 2);
-
- if(pDevice->PhyFlags & PHY_IS_FIBER)
- {
- Value32 = REG_RD_OFFSET(pDevice, 0x5b0);
- REG_WR_OFFSET(pDevice, 0x5b0, Value32 | BIT_10 );
-
- pDevice->GrcLocalCtrl |= BIT_4 ;
- pDevice->GrcLocalCtrl &= ~BIT_5 ;
-
- REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl);
- Value32 = REG_RD(pDevice, Grc.LocalCtrl);
- MM_Wait(40);
- }
-
- if (!pDevice->InitDone)
- {
- if(UNKNOWN_PHY_ID(pDevice->PhyId) && (pDevice->Flags & ROBO_SWITCH_FLAG)) {
- pDevice->LinkStatus = LM_STATUS_LINK_ACTIVE;
- } else {
- pDevice->LinkStatus = LM_STATUS_LINK_DOWN;
- }
- }
-
- if (!(pDevice->TbiFlags & ENABLE_TBI_FLAG) &&
- ( ((pDevice->PhyId & PHY_ID_MASK) != PHY_BCM5401_PHY_ID)&&
- ((pDevice->PhyId & PHY_ID_MASK) != PHY_BCM5411_PHY_ID) ))
- {
- /* 5401/5411 PHY needs a delay of about 1 second after PHY reset */
- /* Without the delay, it has problem linking at forced 10 half */
- /* So skip the reset... */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5780)
- for(j =0; j<0x5000; j++)
- MM_Wait(1);
-
- LM_ResetPhy(pDevice);
- }
-
- /* Setup the phy chip. */
- LM_SetupPhy(pDevice);
-
- if (!(pDevice->TbiFlags & ENABLE_TBI_FLAG)){
- /* Clear CRC stats */
- LM_ReadPhy(pDevice, 0x1e, &Value32);
- LM_WritePhy(pDevice, 0x1e, Value32 | 0x8000);
- LM_ReadPhy(pDevice, 0x14, &Value32);
- }
-
- /* Set up the receive mask. */
- LM_SetReceiveMask(pDevice, pDevice->ReceiveMask);
-
-#ifdef INCLUDE_TCP_SEG_SUPPORT
- if (pDevice->TaskToOffload & LM_TASK_OFFLOAD_TCP_SEGMENTATION)
- {
- if (LM_LoadStkOffLdFirmware(pDevice) == LM_STATUS_FAILURE)
- {
- return LM_STATUS_FAILURE;
- }
- }
-#endif
- LM_WritePostResetSignatures(pDevice, LM_INIT_RESET);
-
- return LM_STATUS_SUCCESS;
-} /* LM_ResetAdapter */
-
-
-/******************************************************************************/
-/* Description: */
-/* This routine disables the adapter from generating interrupts. */
-/* */
-/* Return: */
-/* LM_STATUS_SUCCESS */
-/******************************************************************************/
-LM_STATUS
-LM_DisableInterrupt(
- PLM_DEVICE_BLOCK pDevice)
-{
- REG_WR(pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl |
- MISC_HOST_CTRL_MASK_PCI_INT);
- MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, 1);
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- {
- MB_REG_RD(pDevice, Mailbox.Interrupt[0].Low);
- }
-
- return LM_STATUS_SUCCESS;
-}
-
-
-
-/******************************************************************************/
-/* Description: */
-/* This routine enables the adapter to generate interrupts. */
-/* */
-/* Return: */
-/* LM_STATUS_SUCCESS */
-/******************************************************************************/
-LM_STATUS
-LM_EnableInterrupt(
- PLM_DEVICE_BLOCK pDevice)
-{
- MB_REG_WR(pDevice, Mailbox.Interrupt[0].Low, pDevice->LastTag << 24);
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- {
- MB_REG_RD(pDevice, Mailbox.Interrupt[0].Low);
- }
-
- REG_WR(pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl &
- ~MISC_HOST_CTRL_MASK_PCI_INT);
-
- REG_WR(pDevice, HostCoalesce.Mode, pDevice->CoalesceMode |
- HOST_COALESCE_ENABLE | HOST_COALESCE_NOW);
-
- return LM_STATUS_SUCCESS;
-}
-
-
-
-/******************************************************************************/
-/* Description: */
-/* This routine puts a packet on the wire if there is a transmit DMA */
-/* descriptor available; otherwise the packet is queued for later */
-/* transmission. If the second argue is NULL, this routine will put */
-/* the queued packet on the wire if possible. */
-/* */
-/* Return: */
-/* LM_STATUS_SUCCESS */
-/******************************************************************************/
-LM_STATUS
-LM_SendPacket(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
-{
- LM_UINT32 FragCount;
- PT3_SND_BD pSendBd, pTmpSendBd;
-#ifdef BCM_NIC_SEND_BD
- PT3_SND_BD pShadowSendBd;
- T3_SND_BD NicSendBdArr[MAX_FRAGMENT_COUNT];
-#endif
- LM_UINT32 StartIdx, Idx;
-
- while (1)
- {
- /* Initalize the send buffer descriptors. */
- StartIdx = Idx = pDevice->SendProdIdx;
-
-#ifdef BCM_NIC_SEND_BD
- if (pDevice->Flags & NIC_SEND_BD_FLAG)
- {
- pTmpSendBd = pSendBd = &NicSendBdArr[0];
- }
- else
-#endif
- {
- pTmpSendBd = pSendBd = &pDevice->pSendBdVirt[Idx];
- }
-
- /* Next producer index. */
- for(FragCount = 0; ; )
- {
- LM_UINT32 Value32, Len;
-
- /* Initialize the pointer to the send buffer fragment. */
- MM_MapTxDma(pDevice, pPacket, &pSendBd->HostAddr, &Len, FragCount);
-
- pSendBd->u2.VlanTag = pPacket->VlanTag;
-
- /* Setup the control flags and send buffer size. */
- Value32 = (Len << 16) | pPacket->Flags;
-
-#ifdef INCLUDE_TCP_SEG_SUPPORT
- if (Value32 & (SND_BD_FLAG_CPU_PRE_DMA | SND_BD_FLAG_CPU_POST_DMA))
- {
- if(T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- pSendBd->u2.s2.Reserved = pPacket->u.Tx.MaxSegmentSize;
- }
- else if (FragCount == 0)
- {
- pSendBd->u2.s2.Reserved = pPacket->u.Tx.MaxSegmentSize;
- }
- else
- {
- pSendBd->u2.s2.Reserved = 0;
- Value32 &= 0xffff0fff;
- }
- }
-#endif
- Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
-
- FragCount++;
- if (FragCount >= pPacket->u.Tx.FragCount)
- {
- pSendBd->u1.Len_Flags = Value32 | SND_BD_FLAG_END;
- break;
- }
- else
- {
- pSendBd->u1.Len_Flags = Value32;
- }
-
- pSendBd++;
- if ((Idx == 0) &&
- !(pDevice->Flags & NIC_SEND_BD_FLAG))
- {
- pSendBd = &pDevice->pSendBdVirt[0];
- }
-
- pDevice->SendRing[Idx] = 0;
-
- } /* for */
- if (pDevice->Flags & TX_4G_WORKAROUND_FLAG)
- {
- if (LM_Test4GBoundary(pDevice, pPacket, pTmpSendBd) ==
- LM_STATUS_SUCCESS)
- {
- if (MM_CoalesceTxBuffer(pDevice, pPacket) != LM_STATUS_SUCCESS)
- {
- QQ_PushHead(&pDevice->TxPacketFreeQ.Container, pPacket);
- return LM_STATUS_FAILURE;
- }
- continue;
- }
- }
- break;
- }
- /* Put the packet descriptor in the ActiveQ. */
- pDevice->SendRing[StartIdx] = pPacket;
-
-#ifdef BCM_NIC_SEND_BD
- if (pDevice->Flags & NIC_SEND_BD_FLAG)
- {
- pSendBd = &pDevice->pSendBdVirt[StartIdx];
- pShadowSendBd = &pDevice->ShadowSendBd[StartIdx];
-
- while (StartIdx != Idx)
- {
- LM_UINT32 Value32;
-
- if ((Value32 = pTmpSendBd->HostAddr.High) !=
- pShadowSendBd->HostAddr.High)
- {
- MM_MEMWRITEL(&(pSendBd->HostAddr.High), Value32);
- pShadowSendBd->HostAddr.High = Value32;
- }
-
- MM_MEMWRITEL(&(pSendBd->HostAddr.Low), pTmpSendBd->HostAddr.Low);
-
- if ((Value32 = pTmpSendBd->u1.Len_Flags) !=
- pShadowSendBd->u1.Len_Flags)
- {
- MM_MEMWRITEL(&(pSendBd->u1.Len_Flags), Value32);
- pShadowSendBd->u1.Len_Flags = Value32;
- }
-
- if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG)
- {
- MM_MEMWRITEL(&(pSendBd->u2.VlanTag), pTmpSendBd->u2.VlanTag);
- }
-
- StartIdx = (StartIdx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
- if (StartIdx == 0)
- {
- pSendBd = &pDevice->pSendBdVirt[0];
- pShadowSendBd = &pDevice->ShadowSendBd[0];
- }
- else
- {
- pSendBd++;
- pShadowSendBd++;
- }
- pTmpSendBd++;
- }
- MM_WMB();
- MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
-
- if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX)
- {
- MB_REG_WR(pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
- }
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- {
- MB_REG_RD(pDevice, Mailbox.SendNicProdIdx[0].Low);
- }
- else
- {
- MM_MMIOWB();
- }
- }
- else
-#endif
- {
- MM_WMB();
- MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
-
- if(T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5700_BX)
- {
- MB_REG_WR(pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
- }
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- {
- MB_REG_RD(pDevice, Mailbox.SendHostProdIdx[0].Low);
- }
- else
- {
- MM_MMIOWB();
- }
- }
-
- /* Update the SendBdLeft count. */
- MM_ATOMIC_SUB(&pDevice->SendBdLeft, pPacket->u.Tx.FragCount);
-
- /* Update the producer index. */
- pDevice->SendProdIdx = Idx;
-
- return LM_STATUS_SUCCESS;
-}
-
-STATIC LM_STATUS
-LM_Test4GBoundary(PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket,
- PT3_SND_BD pSendBd)
-{
- int FragCount;
- LM_UINT32 Idx, Base, Len;
-
- Idx = pDevice->SendProdIdx;
- for(FragCount = 0; ; )
- {
- Len = pSendBd->u1.Len_Flags >> 16;
- if (((Base = pSendBd->HostAddr.Low) > 0xffffdcc0) &&
- ((Base + 8 + Len) < Base))
- {
- return LM_STATUS_SUCCESS;
- }
- FragCount++;
- if (FragCount >= pPacket->u.Tx.FragCount)
- {
- break;
- }
- pSendBd++;
- if (!(pDevice->Flags & NIC_SEND_BD_FLAG))
- {
- Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
- if (Idx == 0)
- {
- pSendBd = &pDevice->pSendBdVirt[0];
- }
- }
- }
- return LM_STATUS_FAILURE;
-}
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_UINT32
-ComputeCrc32(LM_UINT8 *pBuffer, LM_UINT32 BufferSize)
-{
- LM_UINT32 Reg;
- LM_UINT32 Tmp;
- int j, k;
-
- Reg = 0xffffffff;
-
- for(j = 0; j < BufferSize; j++)
- {
- Reg ^= pBuffer[j];
-
- for(k = 0; k < 8; k++)
- {
- Tmp = Reg & 0x01;
-
- Reg >>= 1;
-
- if(Tmp)
- {
- Reg ^= 0xedb88320;
- }
- }
- }
-
- return ~Reg;
-} /* ComputeCrc32 */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* This routine sets the receive control register according to ReceiveMask */
-/* */
-/* Return: */
-/* LM_STATUS_SUCCESS */
-/******************************************************************************/
-LM_STATUS
-LM_SetReceiveMask(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask)
-{
- LM_UINT32 ReceiveMask;
- LM_UINT32 RxMode;
- LM_UINT32 j, k;
-
- ReceiveMask = Mask;
-
- RxMode = pDevice->RxMode;
-
- if(Mask & LM_ACCEPT_UNICAST)
- {
- Mask &= ~LM_ACCEPT_UNICAST;
- }
-
- if(Mask & LM_ACCEPT_MULTICAST)
- {
- Mask &= ~LM_ACCEPT_MULTICAST;
- }
-
- if(Mask & LM_ACCEPT_ALL_MULTICAST)
- {
- Mask &= ~LM_ACCEPT_ALL_MULTICAST;
- }
-
- if(Mask & LM_ACCEPT_BROADCAST)
- {
- Mask &= ~LM_ACCEPT_BROADCAST;
- }
-
- RxMode &= ~RX_MODE_KEEP_VLAN_TAG;
- if (Mask & LM_KEEP_VLAN_TAG)
- {
- RxMode |= RX_MODE_KEEP_VLAN_TAG;
- Mask &= ~LM_KEEP_VLAN_TAG;
- }
-
- RxMode &= ~RX_MODE_PROMISCUOUS_MODE;
- if(Mask & LM_PROMISCUOUS_MODE)
- {
- RxMode |= RX_MODE_PROMISCUOUS_MODE;
- Mask &= ~LM_PROMISCUOUS_MODE;
- }
-
- RxMode &= ~(RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED);
- if(Mask & LM_ACCEPT_ERROR_PACKET)
- {
- RxMode |= RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED;
- Mask &= ~LM_ACCEPT_ERROR_PACKET;
- }
-
- /* Make sure all the bits are valid before committing changes. */
- if(Mask)
- {
- return LM_STATUS_FAILURE;
- }
-
- /* Commit the new filter. */
- pDevice->ReceiveMask = ReceiveMask;
-
- pDevice->RxMode = RxMode;
-
- if (pDevice->PowerLevel != LM_POWER_STATE_D0)
- {
- return LM_STATUS_SUCCESS;
- }
-
- REG_WR(pDevice, MacCtrl.RxMode, RxMode);
-
- /* Set up the MC hash table. */
- if(ReceiveMask & LM_ACCEPT_ALL_MULTICAST)
- {
- for(k = 0; k < 4; k++)
- {
- REG_WR(pDevice, MacCtrl.HashReg[k], 0xffffffff);
- }
- }
- else if(ReceiveMask & LM_ACCEPT_MULTICAST)
- {
- for(k = 0; k < 4; k++)
- {
- REG_WR(pDevice, MacCtrl.HashReg[k], pDevice->MulticastHash[k]);
- }
- }
- else
- {
- /* Reject all multicast frames. */
- for(j = 0; j < 4; j++)
- {
- REG_WR(pDevice, MacCtrl.HashReg[j], 0);
- }
- }
-
- /* By default, Tigon3 will accept broadcast frames. We need to setup */
- if(ReceiveMask & LM_ACCEPT_BROADCAST)
- {
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule,
- REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value,
- REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule,
- REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value,
- REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK);
- }
- else
- {
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule,
- REJECT_BROADCAST_RULE1_RULE);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value,
- REJECT_BROADCAST_RULE1_VALUE);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule,
- REJECT_BROADCAST_RULE2_RULE);
- REG_WR(pDevice, MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value,
- REJECT_BROADCAST_RULE2_VALUE);
- }
-
- if(T3_ASIC_5714_FAMILY(pDevice->ChipRevId))
- {
- k = 16;
- }
- else if (!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- k = 16;
- }
- else
- {
- k = 8;
- }
-#ifdef BCM_ASF
- if (pDevice->AsfFlags & ASF_ENABLED)
- {
- k -= 4;
- }
-#endif
-
- /* disable the rest of the rules. */
- for(j = RCV_LAST_RULE_IDX; j < k; j++)
- {
- REG_WR(pDevice, MacCtrl.RcvRules[j].Rule, 0);
- REG_WR(pDevice, MacCtrl.RcvRules[j].Value, 0);
- }
-
- return LM_STATUS_SUCCESS;
-} /* LM_SetReceiveMask */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* Disable the interrupt and put the transmitter and receiver engines in */
-/* an idle state. Also aborts all pending send requests and receive */
-/* buffers. */
-/* */
-/* Return: */
-/* LM_STATUS_SUCCESS */
-/******************************************************************************/
-LM_STATUS
-LM_Abort(
-PLM_DEVICE_BLOCK pDevice)
-{
- PLM_PACKET pPacket;
- LM_UINT Idx;
-
- LM_DisableInterrupt(pDevice);
-
- LM_DisableChip(pDevice);
-
- /*
- * If we do not have a status block pointer, then
- * the device hasn't really been opened. Do not
- * attempt to clean up packets.
- */
- if (pDevice->pStatusBlkVirt == NULL)
- return LM_STATUS_SUCCESS;
-
- /* Abort packets that have already queued to go out. */
- Idx = pDevice->SendConIdx;
- for ( ; ; )
- {
- if ((pPacket = pDevice->SendRing[Idx]))
- {
- pDevice->SendRing[Idx] = 0;
- pPacket->PacketStatus = LM_STATUS_TRANSMIT_ABORTED;
- pDevice->TxCounters.TxPacketAbortedCnt++;
-
- MM_ATOMIC_ADD(&pDevice->SendBdLeft, pPacket->u.Tx.FragCount);
- Idx = (Idx + pPacket->u.Tx.FragCount) &
- T3_SEND_RCB_ENTRY_COUNT_MASK;
-
- QQ_PushTail(&pDevice->TxPacketXmittedQ.Container, pPacket);
- }
- else
- {
- break;
- }
- }
-
- /* Cleanup the receive return rings. */
-#ifdef BCM_NAPI_RXPOLL
- LM_ServiceRxPoll(pDevice, T3_RCV_RETURN_RCB_ENTRY_COUNT);
-#else
- LM_ServiceRxInterrupt(pDevice);
-#endif
-
- /* Indicate packets to the protocol. */
- MM_IndicateTxPackets(pDevice);
-
-#ifdef BCM_NAPI_RXPOLL
-
- /* Move the receive packet descriptors in the ReceivedQ to the */
- /* free queue. */
- for(; ;)
- {
- pPacket = (PLM_PACKET) QQ_PopHead(
- &pDevice->RxPacketReceivedQ.Container);
- if(pPacket == NULL)
- {
- break;
- }
- MM_UnmapRxDma(pDevice, pPacket);
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- }
-#else
- /* Indicate received packets to the protocols. */
- MM_IndicateRxPackets(pDevice);
-#endif
-
- /* Clean up the Std Receive Producer ring. */
- /* Don't always trust the consumer idx in the status block in case of */
- /* hw failure */
- Idx = 0;
-
- while(Idx < T3_STD_RCV_RCB_ENTRY_COUNT)
- {
- if ((pPacket = pDevice->RxStdRing[Idx]))
- {
- MM_UnmapRxDma(pDevice, pPacket);
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- pDevice->RxStdRing[Idx] = 0;
- }
-
- Idx++;
- } /* while */
-
- /* Reinitialize our copy of the indices. */
- pDevice->RxStdProdIdx = 0;
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- /* Clean up the Jumbo Receive Producer ring. */
- Idx = 0;
-
- while(Idx < T3_JUMBO_RCV_RCB_ENTRY_COUNT)
- {
- if ((pPacket = pDevice->RxJumboRing[Idx]))
- {
- MM_UnmapRxDma(pDevice, pPacket);
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- pDevice->RxJumboRing[Idx] = 0;
- }
- Idx++;
- } /* while */
-
- /* Reinitialize our copy of the indices. */
- pDevice->RxJumboProdIdx = 0;
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
- /* Initialize the statistis Block */
- pDevice->pStatusBlkVirt->Status = 0;
- pDevice->pStatusBlkVirt->RcvStdConIdx = 0;
- pDevice->pStatusBlkVirt->RcvJumboConIdx = 0;
- pDevice->pStatusBlkVirt->RcvMiniConIdx = 0;
-
- return LM_STATUS_SUCCESS;
-} /* LM_Abort */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* Disable the interrupt and put the transmitter and receiver engines in */
-/* an idle state. Aborts all pending send requests and receive buffers. */
-/* Also free all the receive buffers. */
-/* */
-/* Return: */
-/* LM_STATUS_SUCCESS */
-/******************************************************************************/
-LM_STATUS
-LM_DoHalt(LM_DEVICE_BLOCK *pDevice)
-{
- PLM_PACKET pPacket;
- LM_UINT32 EntryCnt;
-
- LM_DisableFW(pDevice);
-
- LM_WritePreResetSignatures(pDevice, LM_SHUTDOWN_RESET);
- LM_Abort(pDevice);
-
- if((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5461_PHY_ID)
- LM_WritePhy(pDevice, BCM546X_1c_SHADOW_REG,
- (BCM546X_1c_SPR_CTRL_1 | BCM546X_1c_WR_EN));
-
- /* Get the number of entries in the queue. */
- EntryCnt = QQ_GetEntryCnt(&pDevice->RxPacketFreeQ.Container);
-
- /* Make sure all the packets have been accounted for. */
- for(EntryCnt = 0; EntryCnt < pDevice->RxPacketDescCnt; EntryCnt++)
- {
- pPacket = (PLM_PACKET) QQ_PopHead(&pDevice->RxPacketFreeQ.Container);
- if (pPacket == 0)
- break;
-
- MM_FreeRxBuffer(pDevice, pPacket);
-
- QQ_PushTail(&pDevice->RxPacketFreeQ.Container, pPacket);
- }
-
- LM_ResetChip(pDevice);
- LM_WriteLegacySignatures(pDevice, LM_SHUTDOWN_RESET);
-
- /* Restore PCI configuration registers. */
- MM_WriteConfig32(pDevice, PCI_CACHE_LINE_SIZE_REG,
- pDevice->SavedCacheLineReg);
- LM_RegWrInd(pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG,
- (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId);
-
- /* Reprogram the MAC address. */
- LM_SetMacAddress(pDevice, pDevice->NodeAddress);
-
- return LM_STATUS_SUCCESS;
-} /* LM_DoHalt */
-
-
-LM_STATUS
-LM_Halt(LM_DEVICE_BLOCK *pDevice)
-{
- LM_STATUS status;
-
- status = LM_DoHalt(pDevice);
- LM_WritePostResetSignatures(pDevice, LM_SHUTDOWN_RESET);
- return status;
-}
-
-
-STATIC LM_VOID
-LM_WritePreResetSignatures(LM_DEVICE_BLOCK *pDevice, LM_RESET_TYPE Mode)
-{
- MEM_WR_OFFSET(pDevice, T3_FIRMWARE_MAILBOX,T3_MAGIC_NUM_FIRMWARE_INIT_DONE);
-#ifdef BCM_ASF
- if (pDevice->AsfFlags & ASF_NEW_HANDSHAKE)
- {
- if (Mode == LM_INIT_RESET)
- {
- MEM_WR_OFFSET(pDevice, T3_DRV_STATE_MAILBOX, T3_DRV_STATE_START);
- }
- else if (Mode == LM_SHUTDOWN_RESET)
- {
- MEM_WR_OFFSET(pDevice, T3_DRV_STATE_MAILBOX, T3_DRV_STATE_UNLOAD);
- }
- else if (Mode == LM_SUSPEND_RESET)
- {
- MEM_WR_OFFSET(pDevice, T3_DRV_STATE_MAILBOX, T3_DRV_STATE_SUSPEND);
- }
- }
-#endif
-}
-
-STATIC LM_VOID
-LM_WritePostResetSignatures(LM_DEVICE_BLOCK *pDevice, LM_RESET_TYPE Mode)
-{
-#ifdef BCM_ASF
- if (pDevice->AsfFlags & ASF_NEW_HANDSHAKE)
- {
- if (Mode == LM_INIT_RESET)
- {
- MEM_WR_OFFSET(pDevice, T3_DRV_STATE_MAILBOX,
- T3_DRV_STATE_START_DONE);
- }
- else if (Mode == LM_SHUTDOWN_RESET)
- {
- MEM_WR_OFFSET(pDevice, T3_DRV_STATE_MAILBOX,
- T3_DRV_STATE_UNLOAD_DONE);
- }
- }
-#endif
-}
-
-STATIC LM_VOID
-LM_WriteLegacySignatures(LM_DEVICE_BLOCK *pDevice, LM_RESET_TYPE Mode)
-{
-#ifdef BCM_ASF
- if (pDevice->AsfFlags & ASF_ENABLED)
- {
- if (Mode == LM_INIT_RESET)
- {
- MEM_WR_OFFSET(pDevice, T3_DRV_STATE_MAILBOX, T3_DRV_STATE_START);
- }
- else if (Mode == LM_SHUTDOWN_RESET)
- {
- MEM_WR_OFFSET(pDevice, T3_DRV_STATE_MAILBOX, T3_DRV_STATE_UNLOAD);
- }
- else if (Mode == LM_SUSPEND_RESET)
- {
- MEM_WR_OFFSET(pDevice, T3_DRV_STATE_MAILBOX, T3_DRV_STATE_SUSPEND);
- }
- }
-#endif
-}
-
-STATIC LM_STATUS
-LM_ResetChip(PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 Value32;
- LM_UINT32 j, tmp1 = 0, tmp2 = 0;
-
- /* Wait for access to the nvram interface before resetting. This is */
- if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
- T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701)
- {
- /* Request access to the flash interface. */
- LM_NVRAM_AcquireLock(pDevice);
- }
-
- Value32 = GRC_MISC_CFG_CORE_CLOCK_RESET;
- if (pDevice->Flags & PCI_EXPRESS_FLAG)
- {
- if (REG_RD_OFFSET(pDevice, 0x7e2c) == 0x60) /* PCIE 1.0 system */
- {
- REG_WR_OFFSET(pDevice, 0x7e2c, 0x20);
- }
- if (pDevice->ChipRevId != T3_CHIP_ID_5750_A0)
- {
- /* This bit prevents PCIE link training during GRC reset */
- REG_WR(pDevice, Grc.MiscCfg, BIT_29); /* Write bit 29 first */
- Value32 |= BIT_29; /* and keep bit 29 set during GRC reset */
- }
- }
- if (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- Value32 |= GRC_MISC_GPHY_KEEP_POWER_DURING_RESET;
- }
-
- if(T3_ASIC_5714_FAMILY(pDevice->ChipRevId) )
- {
- /* Save the MSI ENABLE bit (may need to save the message as well) */
- tmp1 = LM_RegRd( pDevice, T3_PCI_MSI_ENABLE );
- }
-
- /* Global reset. */
- RAW_REG_WR(pDevice, Grc.MiscCfg, Value32);
- MM_Wait(120);
-
- MM_ReadConfig32(pDevice, PCI_COMMAND_REG, &Value32);
-
- MM_Wait(120);
-
- /* make sure we re-enable indirect accesses */
- MM_WriteConfig32(pDevice, T3_PCI_MISC_HOST_CTRL_REG,
- pDevice->MiscHostCtrl);
-
- /* Set MAX PCI retry to zero. */
- Value32 = T3_PCI_STATE_PCI_ROM_ENABLE | T3_PCI_STATE_PCI_ROM_RETRY_ENABLE;
- if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
- {
- if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
- {
- Value32 |= T3_PCI_STATE_RETRY_SAME_DMA;
- }
- }
- MM_WriteConfig32(pDevice, T3_PCI_STATE_REG, Value32);
-
- /* Restore PCI command register. */
- MM_WriteConfig32(pDevice, PCI_COMMAND_REG,
- pDevice->PciCommandStatusWords);
-
- /* Disable PCI-X relaxed ordering bit. */
- MM_ReadConfig32(pDevice, PCIX_CAP_REG, &Value32);
- Value32 &= ~PCIX_ENABLE_RELAXED_ORDERING;
- MM_WriteConfig32(pDevice, PCIX_CAP_REG, Value32);
-
- /* Enable memory arbiter */
- if(T3_ASIC_5714_FAMILY(pDevice->ChipRevId) )
- {
- Value32 = REG_RD(pDevice,MemArbiter.Mode);
- REG_WR(pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE | Value32);
- }
- else
- {
- REG_WR(pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE);
- }
-
- if(T3_ASIC_5714_FAMILY(pDevice->ChipRevId))
- {
- /* restore the MSI ENABLE bit (may need to restore the message also) */
- tmp2 = LM_RegRd( pDevice, T3_PCI_MSI_ENABLE );
- tmp2 |= (tmp1 & (1 << 16));
- LM_RegWr( pDevice, T3_PCI_MSI_ENABLE, tmp2, TRUE );
- tmp2 = LM_RegRd( pDevice, T3_PCI_MSI_ENABLE );
- }
-
-
- if (pDevice->ChipRevId == T3_CHIP_ID_5750_A3)
- {
- /* Because of chip bug on A3, we need to kill the CPU */
- LM_DisableFW(pDevice);
- REG_WR_OFFSET(pDevice, 0x5000, 0x400);
- }
-
- /*
- * BCM4785: In order to avoid repercussions from using potentially
- * defective internal ROM, stop the Rx RISC CPU, which is not
- * required.
- */
- if (pDevice->Flags & SB_CORE_FLAG) {
- LM_DisableFW(pDevice);
- LM_HaltCpu(pDevice, T3_RX_CPU_ID);
- }
-
-#ifdef BIG_ENDIAN_HOST
- /* Reconfigure the mode register. */
- Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
- GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
- GRC_MODE_BYTE_SWAP_DATA |
- GRC_MODE_WORD_SWAP_DATA;
-#else
- /* Reconfigure the mode register. */
- Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA;
-#endif
- REG_WR(pDevice, Grc.Mode, Value32);
-
- if ((pDevice->Flags & MINI_PCI_FLAG) &&
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705))
- {
- pDevice->ClockCtrl |= T3_PCI_CLKRUN_OUTPUT_EN;
- if (pDevice->ChipRevId == T3_CHIP_ID_5705_A0)
- {
- pDevice->ClockCtrl |= T3_PCI_FORCE_CLKRUN;
- }
- REG_WR(pDevice, PciCfg.ClockCtrl, pDevice->ClockCtrl);
- }
-
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- {
- pDevice->MacMode = MAC_MODE_PORT_MODE_TBI;
- }
- else if(pDevice->PhyFlags & PHY_IS_FIBER)
- {
- pDevice->MacMode = MAC_MODE_PORT_MODE_GMII;
- }
- else
- {
- pDevice->MacMode = 0;
- }
-
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- REG_RD_BACK(pDevice, MacCtrl.Mode);
- MM_Wait(40);
-
- /* BCM4785: Don't use any firmware, so don't wait */
- if (!pDevice->Flags & SB_CORE_FLAG) {
- /* Wait for the firmware to finish initialization. */
- for(j = 0; j < 100000; j++) {
- MM_Wait(10);
-
- if (j < 100)
- continue;
-
- Value32 = MEM_RD_OFFSET(pDevice, T3_FIRMWARE_MAILBOX);
- if(Value32 == ~T3_MAGIC_NUM_FIRMWARE_INIT_DONE) {
- break;
- }
- }
- if ((j >= 0x100000) && (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704)) {
- /* if the boot code is not running */
- if (LM_NVRAM_AcquireLock(pDevice) != LM_STATUS_SUCCESS) {
- LM_DEVICE_BLOCK *pDevice2;
-
- REG_WR(pDevice, Nvram.Cmd, NVRAM_CMD_RESET);
- pDevice2 = MM_FindPeerDev(pDevice);
- if (pDevice2 && !pDevice2->InitDone)
- REG_WR(pDevice2, Nvram.Cmd, NVRAM_CMD_RESET);
- } else {
- LM_NVRAM_ReleaseLock(pDevice);
- }
- }
- }
-
- if ((pDevice->Flags & PCI_EXPRESS_FLAG) &&
- (pDevice->ChipRevId != T3_CHIP_ID_5750_A0))
- {
- /* Enable PCIE bug fix */
- Value32 = REG_RD_OFFSET(pDevice, 0x7c00);
- REG_WR_OFFSET(pDevice, 0x7c00, Value32 | BIT_25 | BIT_29);
- }
-
-#ifdef BCM_ASF
- pDevice->AsfFlags = 0;
- Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_SIG_ADDR);
-
- if (Value32 == T3_NIC_DATA_SIG)
- {
- Value32 = MEM_RD_OFFSET(pDevice, T3_NIC_DATA_NIC_CFG_ADDR);
- if (Value32 & T3_NIC_CFG_ENABLE_ASF)
- {
- pDevice->AsfFlags = ASF_ENABLED;
- if (T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- pDevice->AsfFlags |= ASF_NEW_HANDSHAKE;
- }
- }
- }
-#endif
-
- return LM_STATUS_SUCCESS;
-}
-
-
-LM_STATUS
-LM_ShutdownChip(PLM_DEVICE_BLOCK pDevice, LM_RESET_TYPE Mode)
-{
- LM_DisableFW(pDevice);
- LM_WritePreResetSignatures(pDevice, Mode);
- if (pDevice->InitDone)
- {
- LM_Abort(pDevice);
- }
- else
- {
- LM_DisableChip(pDevice);
- }
- LM_ResetChip(pDevice);
- LM_WriteLegacySignatures(pDevice, Mode);
- LM_WritePostResetSignatures(pDevice, Mode);
- return LM_STATUS_SUCCESS;
-}
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-void
-LM_ServiceTxInterrupt(
-PLM_DEVICE_BLOCK pDevice) {
- PLM_PACKET pPacket;
- LM_UINT32 HwConIdx;
- LM_UINT32 SwConIdx;
-
- HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx;
-
- /* Get our copy of the consumer index. The buffer descriptors */
- /* that are in between the consumer indices are freed. */
- SwConIdx = pDevice->SendConIdx;
-
- /* Move the packets from the TxPacketActiveQ that are sent out to */
- /* the TxPacketXmittedQ. Packets that are sent use the */
- /* descriptors that are between SwConIdx and HwConIdx. */
- while(SwConIdx != HwConIdx)
- {
- pPacket = pDevice->SendRing[SwConIdx];
- pDevice->SendRing[SwConIdx] = 0;
-
- /* Set the return status. */
- pPacket->PacketStatus = LM_STATUS_SUCCESS;
-
- /* Put the packet in the TxPacketXmittedQ for indication later. */
- QQ_PushTail(&pDevice->TxPacketXmittedQ.Container, pPacket);
-
- /* Move to the next packet's BD. */
- SwConIdx = (SwConIdx + pPacket->u.Tx.FragCount) &
- T3_SEND_RCB_ENTRY_COUNT_MASK;
-
- /* Update the number of unused BDs. */
- MM_ATOMIC_ADD(&pDevice->SendBdLeft, pPacket->u.Tx.FragCount);
-
- /* Get the new updated HwConIdx. */
- HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx;
- } /* while */
-
- /* Save the new SwConIdx. */
- pDevice->SendConIdx = SwConIdx;
-
-} /* LM_ServiceTxInterrupt */
-
-
-#ifdef BCM_NAPI_RXPOLL
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-int
-LM_ServiceRxPoll(PLM_DEVICE_BLOCK pDevice, int limit)
-{
- PLM_PACKET pPacket=NULL;
- PT3_RCV_BD pRcvBd;
- LM_UINT32 HwRcvRetProdIdx;
- LM_UINT32 SwRcvRetConIdx;
- int received = 0;
-
- /* Loop thru the receive return rings for received packets. */
- HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx;
-
- SwRcvRetConIdx = pDevice->RcvRetConIdx;
- MM_RMB();
- while (SwRcvRetConIdx != HwRcvRetProdIdx)
- {
- pRcvBd = &pDevice->pRcvRetBdVirt[SwRcvRetConIdx];
-
- /* Get the received packet descriptor. */
- pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) +
- MM_UINT_PTR(pRcvBd->Opaque));
-
- switch(pPacket->u.Rx.RcvProdRing) {
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- case T3_JUMBO_RCV_PROD_RING: /* Jumbo Receive Ring. */
- pDevice->RxJumboRing[pPacket->u.Rx.RcvRingProdIdx] = 0;
- break;
-#endif
- case T3_STD_RCV_PROD_RING: /* Standard Receive Ring. */
- pDevice->RxStdRing[pPacket->u.Rx.RcvRingProdIdx] = 0;
- break;
- }
-
- /* Check the error flag. */
- if(pRcvBd->ErrorFlag &&
- pRcvBd->ErrorFlag != RCV_BD_ERR_ODD_NIBBLED_RCVD_MII)
- {
- pPacket->PacketStatus = LM_STATUS_FAILURE;
-
- pDevice->RxCounters.RxPacketErrCnt++;
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_BAD_CRC)
- {
- pDevice->RxCounters.RxErrCrcCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_COLL_DETECT)
- {
- pDevice->RxCounters.RxErrCollCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_LINK_LOST_DURING_PKT)
- {
- pDevice->RxCounters.RxErrLinkLostCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_PHY_DECODE_ERR)
- {
- pDevice->RxCounters.RxErrPhyDecodeCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_ODD_NIBBLED_RCVD_MII)
- {
- pDevice->RxCounters.RxErrOddNibbleCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_MAC_ABORT)
- {
- pDevice->RxCounters.RxErrMacAbortCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_LEN_LT_64)
- {
- pDevice->RxCounters.RxErrShortPacketCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_TRUNC_NO_RESOURCES)
- {
- pDevice->RxCounters.RxErrNoResourceCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_GIANT_FRAME_RCVD)
- {
- pDevice->RxCounters.RxErrLargePacketCnt++;
- }
- }
- else
- {
- pPacket->PacketStatus = LM_STATUS_SUCCESS;
- pPacket->PacketSize = pRcvBd->Len - 4;
-
- pPacket->Flags = pRcvBd->Flags;
- if(pRcvBd->Flags & RCV_BD_FLAG_VLAN_TAG)
- {
- pPacket->VlanTag = pRcvBd->VlanTag;
- }
-
- pPacket->u.Rx.TcpUdpChecksum = pRcvBd->TcpUdpCksum;
- }
-
- /* Put the packet descriptor containing the received packet */
- /* buffer in the RxPacketReceivedQ for indication later. */
- QQ_PushTail(&pDevice->RxPacketReceivedQ.Container, pPacket);
-
- /* Go to the next buffer descriptor. */
- SwRcvRetConIdx = (SwRcvRetConIdx + 1) &
- pDevice->RcvRetRcbEntryCountMask;
-
- if (++received >= limit)
- {
- break;
- }
- } /* while */
-
- pDevice->RcvRetConIdx = SwRcvRetConIdx;
-
- /* Update the receive return ring consumer index. */
- MB_REG_WR(pDevice, Mailbox.RcvRetConIdx[0].Low, SwRcvRetConIdx);
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- {
- MB_REG_RD(pDevice, Mailbox.RcvRetConIdx[0].Low);
- }
- else
- {
- MM_MMIOWB();
- }
- return received;
-} /* LM_ServiceRxPoll */
-#endif /* BCM_NAPI_RXPOLL */
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-void
-LM_ServiceRxInterrupt(PLM_DEVICE_BLOCK pDevice)
-{
-#ifndef BCM_NAPI_RXPOLL
- PLM_PACKET pPacket;
- PT3_RCV_BD pRcvBd;
-#endif
- LM_UINT32 HwRcvRetProdIdx;
- LM_UINT32 SwRcvRetConIdx;
-
- /* Loop thru the receive return rings for received packets. */
- HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx;
-
- SwRcvRetConIdx = pDevice->RcvRetConIdx;
-#ifdef BCM_NAPI_RXPOLL
- if (!pDevice->RxPoll)
- {
- if (SwRcvRetConIdx != HwRcvRetProdIdx)
- {
- if (MM_ScheduleRxPoll(pDevice) == LM_STATUS_SUCCESS)
- {
- pDevice->RxPoll = TRUE;
- REG_WR(pDevice, Grc.Mode,
- pDevice->GrcMode | GRC_MODE_NO_INTERRUPT_ON_RECEIVE);
- }
- }
- }
-#else
- MM_RMB();
- while(SwRcvRetConIdx != HwRcvRetProdIdx)
- {
- pRcvBd = &pDevice->pRcvRetBdVirt[SwRcvRetConIdx];
-
- /* Get the received packet descriptor. */
- pPacket = (PLM_PACKET) (MM_UINT_PTR(pDevice->pPacketDescBase) +
- MM_UINT_PTR(pRcvBd->Opaque));
-
- switch(pPacket->u.Rx.RcvProdRing) {
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- case T3_JUMBO_RCV_PROD_RING: /* Jumbo Receive Ring. */
- pDevice->RxJumboRing[pPacket->u.Rx.RcvRingProdIdx] = 0;
- break;
-#endif
- case T3_STD_RCV_PROD_RING: /* Standard Receive Ring. */
- pDevice->RxStdRing[pPacket->u.Rx.RcvRingProdIdx] = 0;
- break;
- }
-
- /* Check the error flag. */
- if(pRcvBd->ErrorFlag &&
- pRcvBd->ErrorFlag != RCV_BD_ERR_ODD_NIBBLED_RCVD_MII)
- {
- pPacket->PacketStatus = LM_STATUS_FAILURE;
-
- pDevice->RxCounters.RxPacketErrCnt++;
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_BAD_CRC)
- {
- pDevice->RxCounters.RxErrCrcCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_COLL_DETECT)
- {
- pDevice->RxCounters.RxErrCollCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_LINK_LOST_DURING_PKT)
- {
- pDevice->RxCounters.RxErrLinkLostCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_PHY_DECODE_ERR)
- {
- pDevice->RxCounters.RxErrPhyDecodeCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_ODD_NIBBLED_RCVD_MII)
- {
- pDevice->RxCounters.RxErrOddNibbleCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_MAC_ABORT)
- {
- pDevice->RxCounters.RxErrMacAbortCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_LEN_LT_64)
- {
- pDevice->RxCounters.RxErrShortPacketCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_TRUNC_NO_RESOURCES)
- {
- pDevice->RxCounters.RxErrNoResourceCnt++;
- }
-
- if(pRcvBd->ErrorFlag & RCV_BD_ERR_GIANT_FRAME_RCVD)
- {
- pDevice->RxCounters.RxErrLargePacketCnt++;
- }
- }
- else
- {
- pPacket->PacketStatus = LM_STATUS_SUCCESS;
- pPacket->PacketSize = pRcvBd->Len - 4;
-
- pPacket->Flags = pRcvBd->Flags;
- if(pRcvBd->Flags & RCV_BD_FLAG_VLAN_TAG)
- {
- pPacket->VlanTag = pRcvBd->VlanTag;
- }
-
- pPacket->u.Rx.TcpUdpChecksum = pRcvBd->TcpUdpCksum;
- }
-
- /* Put the packet descriptor containing the received packet */
- /* buffer in the RxPacketReceivedQ for indication later. */
- QQ_PushTail(&pDevice->RxPacketReceivedQ.Container, pPacket);
-
- /* Go to the next buffer descriptor. */
- SwRcvRetConIdx = (SwRcvRetConIdx + 1) &
- pDevice->RcvRetRcbEntryCountMask;
-
- } /* while */
-
- pDevice->RcvRetConIdx = SwRcvRetConIdx;
-
- /* Update the receive return ring consumer index. */
- MB_REG_WR(pDevice, Mailbox.RcvRetConIdx[0].Low, SwRcvRetConIdx);
- if (pDevice->Flags & FLUSH_POSTED_WRITE_FLAG)
- {
- MB_REG_RD(pDevice, Mailbox.RcvRetConIdx[0].Low);
- }
- else
- {
- MM_MMIOWB();
- }
-
-#endif
-} /* LM_ServiceRxInterrupt */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* This is the interrupt event handler routine. It acknowledges all */
-/* pending interrupts and process all pending events. */
-/* */
-/* Return: */
-/* LM_STATUS_SUCCESS */
-/******************************************************************************/
-LM_STATUS
-LM_ServiceInterrupts(
- PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 Value32;
- int ServicePhyInt = FALSE;
-
- /* Setup the phy chip whenever the link status changes. */
- if(pDevice->LinkChngMode == T3_LINK_CHNG_MODE_USE_STATUS_REG)
- {
- Value32 = REG_RD(pDevice, MacCtrl.Status);
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT)
- {
- if (Value32 & MAC_STATUS_MI_INTERRUPT)
- {
- ServicePhyInt = TRUE;
- }
- }
- else if(Value32 & MAC_STATUS_LINK_STATE_CHANGED)
- {
- ServicePhyInt = TRUE;
- }
- }
- else
- {
- if(pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_LINK_CHANGED_STATUS)
- {
- pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED |
- (pDevice->pStatusBlkVirt->Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS);
- ServicePhyInt = TRUE;
- }
- }
-#ifdef INCLUDE_TBI_SUPPORT
- if (pDevice->IgnoreTbiLinkChange == TRUE)
- {
- ServicePhyInt = FALSE;
- }
-#endif
- if (ServicePhyInt == TRUE)
- {
- MM_ACQUIRE_PHY_LOCK_IN_IRQ(pDevice);
- LM_SetupPhy(pDevice);
- MM_RELEASE_PHY_LOCK_IN_IRQ(pDevice);
- }
-
- /* Service receive and transmit interrupts. */
- LM_ServiceRxInterrupt(pDevice);
- LM_ServiceTxInterrupt(pDevice);
-
-#ifndef BCM_NAPI_RXPOLL
- /* No spinlock for this queue since this routine is serialized. */
- if(!QQ_Empty(&pDevice->RxPacketReceivedQ.Container))
- {
- /* Indicate receive packets. */
- MM_IndicateRxPackets(pDevice);
- }
-#endif
-
- /* No spinlock for this queue since this routine is serialized. */
- if(!QQ_Empty(&pDevice->TxPacketXmittedQ.Container))
- {
- MM_IndicateTxPackets(pDevice);
- }
-
- return LM_STATUS_SUCCESS;
-} /* LM_ServiceInterrupts */
-
-
-/******************************************************************************/
-/* Description: Add a Multicast address. Note that MC addresses, once added, */
-/* cannot be individually deleted. All addresses must be */
-/* cleared. */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS
-LM_MulticastAdd(LM_DEVICE_BLOCK *pDevice, PLM_UINT8 pMcAddress)
-{
-
- LM_UINT32 RegIndex;
- LM_UINT32 Bitpos;
- LM_UINT32 Crc32;
-
- Crc32 = ComputeCrc32(pMcAddress, ETHERNET_ADDRESS_SIZE);
-
- /* The most significant 7 bits of the CRC32 (no inversion), */
- /* are used to index into one of the possible 128 bit positions. */
- Bitpos = ~Crc32 & 0x7f;
-
- /* Hash register index. */
- RegIndex = (Bitpos & 0x60) >> 5;
-
- /* Bit to turn on within a hash register. */
- Bitpos &= 0x1f;
-
- /* Enable the multicast bit. */
- pDevice->MulticastHash[RegIndex] |= (1 << Bitpos);
-
- LM_SetReceiveMask(pDevice, pDevice->ReceiveMask | LM_ACCEPT_MULTICAST);
-
- return LM_STATUS_SUCCESS;
-}
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS
-LM_MulticastDel(LM_DEVICE_BLOCK *pDevice, PLM_UINT8 pMcAddress)
-{
- return LM_STATUS_FAILURE;
-} /* LM_MulticastDel */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS
-LM_MulticastClear(LM_DEVICE_BLOCK *pDevice)
-{
- int i;
-
- for (i = 0; i < 4; i++)
- {
- pDevice->MulticastHash[i] = 0;
- }
- LM_SetReceiveMask(pDevice, pDevice->ReceiveMask & ~LM_ACCEPT_MULTICAST);
-
- return LM_STATUS_SUCCESS;
-} /* LM_MulticastClear */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS
-LM_SetMacAddress(
- PLM_DEVICE_BLOCK pDevice,
- PLM_UINT8 pMacAddress)
-{
- LM_UINT32 j;
-
- for(j = 0; j < 4; j++)
- {
- REG_WR(pDevice, MacCtrl.MacAddr[j].High,
- (pMacAddress[0] << 8) | pMacAddress[1]);
- REG_WR(pDevice, MacCtrl.MacAddr[j].Low,
- (pMacAddress[2] << 24) | (pMacAddress[3] << 16) |
- (pMacAddress[4] << 8) | pMacAddress[5]);
- }
-
- if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703) ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704))
- {
- for (j = 0; j < 12; j++)
- {
- REG_WR(pDevice, MacCtrl.MacAddrExt[j].High,
- (pMacAddress[0] << 8) | pMacAddress[1]);
- REG_WR(pDevice, MacCtrl.MacAddrExt[j].Low,
- (pMacAddress[2] << 24) | (pMacAddress[3] << 16) |
- (pMacAddress[4] << 8) | pMacAddress[5]);
- }
- }
- return LM_STATUS_SUCCESS;
-}
-
-LM_VOID
-LM_PhyTapPowerMgmt(LM_DEVICE_BLOCK *pDevice)
-{
- /* Turn off tap power management. */
- if((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
- {
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x4c20);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1804);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x1204);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0132);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0232);
- LM_WritePhy(pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
- LM_WritePhy(pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
-
- MM_Wait(40);
- }
-}
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/* LM_STATUS_LINK_ACTIVE */
-/* LM_STATUS_LINK_DOWN */
-/******************************************************************************/
-static LM_STATUS
-LM_InitBcm540xPhy(
-PLM_DEVICE_BLOCK pDevice)
-{
- LM_LINE_SPEED CurrentLineSpeed;
- LM_DUPLEX_MODE CurrentDuplexMode;
- LM_STATUS CurrentLinkStatus;
- LM_UINT32 Value32;
- LM_UINT32 j;
- robo_info_t *robo;
-
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x02);
-
- if ((pDevice->PhyFlags & PHY_RESET_ON_LINKDOWN) &&
- (pDevice->LinkStatus == LM_STATUS_LINK_ACTIVE))
- {
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- if(!(Value32 & PHY_STATUS_LINK_PASS))
- {
- LM_ResetPhy(pDevice);
- }
- }
- if((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
- {
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
-
- if(!pDevice->InitDone)
- {
- Value32 = 0;
- }
-
- if(!(Value32 & PHY_STATUS_LINK_PASS))
- {
- LM_PhyTapPowerMgmt(pDevice);
-
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- for(j = 0; j < 1000; j++)
- {
- MM_Wait(10);
-
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- if(Value32 & PHY_STATUS_LINK_PASS)
- {
- MM_Wait(40);
- break;
- }
- }
-
- if((pDevice->PhyId & PHY_ID_REV_MASK) == PHY_BCM5401_B0_REV)
- {
- if(!(Value32 & PHY_STATUS_LINK_PASS) &&
- (pDevice->OldLineSpeed == LM_LINE_SPEED_1000MBPS))
- {
- LM_ResetPhy(pDevice);
- }
- }
- }
- }
- else if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
- {
- LM_WritePhy(pDevice, 0x15, 0x0a75);
- LM_WritePhy(pDevice, 0x1c, 0x8c68);
- LM_WritePhy(pDevice, 0x1c, 0x8d68);
- LM_WritePhy(pDevice, 0x1c, 0x8c68);
- }
-
- /* Acknowledge interrupts. */
- LM_ReadPhy(pDevice, BCM540X_INT_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, BCM540X_INT_STATUS_REG, &Value32);
-
- /* Configure the interrupt mask. */
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT)
- {
- LM_WritePhy(pDevice, BCM540X_INT_MASK_REG, ~BCM540X_INT_LINK_CHANGE);
- }
-
- /* Configure PHY led mode. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701 ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700))
- {
- if(pDevice->LedCtrl == LED_CTRL_PHY_MODE_1)
- {
- LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG,
- BCM540X_EXT_CTRL_LINK3_LED_MODE);
- }
- else
- {
- LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, 0);
- }
- }
- else if((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5461_PHY_ID)
- {
- /*
- ** Set up the 'link' LED for the 4785+5461 combo,
- ** using the INTR/ENERGYDET pin (on the BCM4785 bringup board).
- */
- LM_WritePhy( pDevice,
- BCM546X_1c_SHADOW_REG,
- (BCM546X_1c_SPR_CTRL_2 | BCM546X_1c_WR_EN | BCM546X_1c_SP2_NRG_DET) );
-
- /*
- ** Set up the LINK LED mode for the 4785+5461 combo,
- ** using the 5461 SLAVE/ANEN pin (on the BCM4785 bringup board) as
- ** active low link status (phy ready) feedback to the 4785
- */
- LM_WritePhy( pDevice,
- BCM546X_1c_SHADOW_REG,
- (BCM546X_1c_SPR_CTRL_1 | BCM546X_1c_WR_EN | BCM546X_1c_SP1_LINK_LED) );
- }
-
- if (pDevice->PhyFlags & PHY_CAPACITIVE_COUPLING)
- {
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x4007);
- LM_ReadPhy(pDevice, BCM5401_AUX_CTRL, &Value32);
- if (!(Value32 & BIT_10))
- {
- /* set the bit and re-link */
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, Value32 | BIT_10);
- return LM_STATUS_LINK_SETTING_MISMATCH;
- }
- }
-
- CurrentLinkStatus = LM_STATUS_LINK_DOWN;
-
- if(UNKNOWN_PHY_ID(pDevice->PhyId) && (pDevice->Flags & ROBO_SWITCH_FLAG)) {
- B57_INFO(("Force to active link of 1000 MBPS and full duplex mod.\n"));
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
-
- /* Set the line speed based on the robo switch type */
- robo = ((PUM_DEVICE_BLOCK)pDevice)->robo;
- if (robo->devid == DEVID5325)
- {
- CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
- }
- else
- {
- CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
- }
- CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
-
- /* Save line settings. */
- pDevice->LineSpeed = CurrentLineSpeed;
- pDevice->DuplexMode = CurrentDuplexMode;
- } else {
-
- /* Get current link and duplex mode. */
- for(j = 0; j < 100; j++)
- {
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
-
- if(Value32 & PHY_STATUS_LINK_PASS)
- {
- break;
- }
- MM_Wait(40);
- }
-
- if(Value32 & PHY_STATUS_LINK_PASS)
- {
-
- /* Determine the current line and duplex settings. */
- LM_ReadPhy(pDevice, BCM540X_AUX_STATUS_REG, &Value32);
- for(j = 0; j < 2000; j++)
- {
- MM_Wait(10);
-
- LM_ReadPhy(pDevice, BCM540X_AUX_STATUS_REG, &Value32);
- if(Value32)
- {
- break;
- }
- }
-
- switch(Value32 & BCM540X_AUX_SPEED_MASK)
- {
- case BCM540X_AUX_10BASET_HD:
- CurrentLineSpeed = LM_LINE_SPEED_10MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
-
- case BCM540X_AUX_10BASET_FD:
- CurrentLineSpeed = LM_LINE_SPEED_10MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
-
- case BCM540X_AUX_100BASETX_HD:
- CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
-
- case BCM540X_AUX_100BASETX_FD:
- CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
-
- case BCM540X_AUX_100BASET_HD:
- CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
- break;
-
- case BCM540X_AUX_100BASET_FD:
- CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
- CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
- break;
-
- default:
-
- CurrentLineSpeed = LM_LINE_SPEED_UNKNOWN;
- CurrentDuplexMode = LM_DUPLEX_MODE_UNKNOWN;
- break;
- }
-
- /* Make sure we are in auto-neg mode. */
- for (j = 0; j < 200; j++)
- {
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
- if(Value32 && Value32 != 0x7fff)
- {
- break;
- }
-
- if(Value32 == 0 &&
- pDevice->RequestedLineSpeed == LM_LINE_SPEED_10MBPS &&
- pDevice->RequestedDuplexMode == LM_DUPLEX_MODE_HALF)
- {
- break;
- }
-
- MM_Wait(10);
- }
-
- /* Use the current line settings for "auto" mode. */
- if(pDevice->RequestedLineSpeed == LM_LINE_SPEED_AUTO)
- {
- if(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)
- {
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
-
- /* We may be exiting low power mode and the link is in */
- /* 10mb. In this case, we need to restart autoneg. */
-
- if (LM_PhyAdvertiseAll(pDevice) != LM_STATUS_SUCCESS)
- {
- CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
- }
- }
- else
- {
- CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
- }
- }
- else
- {
- /* Force line settings. */
- /* Use the current setting if it matches the user's requested */
- /* setting. */
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
- if((pDevice->LineSpeed == CurrentLineSpeed) &&
- (pDevice->DuplexMode == CurrentDuplexMode))
- {
- if ((pDevice->DisableAutoNeg &&
- !(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)) ||
- (!pDevice->DisableAutoNeg &&
- (Value32 & PHY_CTRL_AUTO_NEG_ENABLE)))
- {
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- }
- else
- {
- CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
- }
- }
- else
- {
- CurrentLinkStatus = LM_STATUS_LINK_SETTING_MISMATCH;
- }
- }
-
- /* Save line settings. */
- pDevice->LineSpeed = CurrentLineSpeed;
- pDevice->DuplexMode = CurrentDuplexMode;
- }
-}
-
- return CurrentLinkStatus;
-} /* LM_InitBcm540xPhy */
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS
-LM_SetFlowControl(
- PLM_DEVICE_BLOCK pDevice,
- LM_UINT32 LocalPhyAd,
- LM_UINT32 RemotePhyAd)
-{
- LM_FLOW_CONTROL FlowCap;
-
- /* Resolve flow control. */
- FlowCap = LM_FLOW_CONTROL_NONE;
-
- /* See Table 28B-3 of 802.3ab-1999 spec. */
- if(pDevice->FlowControlCap & LM_FLOW_CONTROL_AUTO_PAUSE)
- {
- if(pDevice->PhyFlags & PHY_IS_FIBER){
- LocalPhyAd &= ~(PHY_AN_AD_ASYM_PAUSE |
- PHY_AN_AD_PAUSE_CAPABLE);
- RemotePhyAd &= ~(PHY_AN_AD_ASYM_PAUSE |
- PHY_AN_AD_PAUSE_CAPABLE);
-
- if (LocalPhyAd & PHY_AN_AD_1000XPAUSE)
- LocalPhyAd |= PHY_AN_AD_PAUSE_CAPABLE;
- if (LocalPhyAd & PHY_AN_AD_1000XPSE_ASYM)
- LocalPhyAd |= PHY_AN_AD_ASYM_PAUSE;
- if (RemotePhyAd & PHY_AN_AD_1000XPAUSE)
- RemotePhyAd |= PHY_LINK_PARTNER_PAUSE_CAPABLE;
- if (RemotePhyAd & PHY_AN_AD_1000XPSE_ASYM)
- RemotePhyAd |= PHY_LINK_PARTNER_ASYM_PAUSE;
- }
-
- if(LocalPhyAd & PHY_AN_AD_PAUSE_CAPABLE)
- {
- if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE)
- {
- if(RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE)
- {
- FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE |
- LM_FLOW_CONTROL_RECEIVE_PAUSE;
- }
- else if(RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE)
- {
- FlowCap = LM_FLOW_CONTROL_RECEIVE_PAUSE;
- }
- }
- else
- {
- if(RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE)
- {
- FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE |
- LM_FLOW_CONTROL_RECEIVE_PAUSE;
- }
- }
- }
- else if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE)
- {
- if((RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) &&
- (RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE))
- {
- FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE;
- }
- }
- }
- else
- {
- FlowCap = pDevice->FlowControlCap;
- }
-
- pDevice->FlowControl = LM_FLOW_CONTROL_NONE;
-
- /* Enable/disable rx PAUSE. */
- pDevice->RxMode &= ~RX_MODE_ENABLE_FLOW_CONTROL;
- if(FlowCap & LM_FLOW_CONTROL_RECEIVE_PAUSE &&
- (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE ||
- pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE))
- {
- pDevice->FlowControl |= LM_FLOW_CONTROL_RECEIVE_PAUSE;
- pDevice->RxMode |= RX_MODE_ENABLE_FLOW_CONTROL;
-
- }
- REG_WR(pDevice, MacCtrl.RxMode, pDevice->RxMode);
-
- /* Enable/disable tx PAUSE. */
- pDevice->TxMode &= ~TX_MODE_ENABLE_FLOW_CONTROL;
- if(FlowCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE &&
- (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE ||
- pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE))
- {
- pDevice->FlowControl |= LM_FLOW_CONTROL_TRANSMIT_PAUSE;
- pDevice->TxMode |= TX_MODE_ENABLE_FLOW_CONTROL;
-
- }
- REG_WR(pDevice, MacCtrl.TxMode, pDevice->TxMode);
-
- return LM_STATUS_SUCCESS;
-}
-
-
-#ifdef INCLUDE_TBI_SUPPORT
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_InitBcm800xPhy(
- PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 Value32;
- LM_UINT32 j;
-
-
- Value32 = REG_RD(pDevice, MacCtrl.Status);
-
- /* Reset the SERDES during init and when we have link. */
- if(!pDevice->InitDone || Value32 & MAC_STATUS_PCS_SYNCED)
- {
- /* Set PLL lock range. */
- LM_WritePhy(pDevice, 0x16, 0x8007);
-
- /* Software reset. */
- LM_WritePhy(pDevice, 0x00, 0x8000);
-
- /* Wait for reset to complete. */
- for(j = 0; j < 500; j++)
- {
- MM_Wait(10);
- }
-
- /* Config mode; seletct PMA/Ch 1 regs. */
- LM_WritePhy(pDevice, 0x10, 0x8411);
-
- /* Enable auto-lock and comdet, select txclk for tx. */
- LM_WritePhy(pDevice, 0x11, 0x0a10);
-
- LM_WritePhy(pDevice, 0x18, 0x00a0);
- LM_WritePhy(pDevice, 0x16, 0x41ff);
-
- /* Assert and deassert POR. */
- LM_WritePhy(pDevice, 0x13, 0x0400);
- MM_Wait(40);
- LM_WritePhy(pDevice, 0x13, 0x0000);
-
- LM_WritePhy(pDevice, 0x11, 0x0a50);
- MM_Wait(40);
- LM_WritePhy(pDevice, 0x11, 0x0a10);
-
- /* Delay for signal to stabilize. */
- for(j = 0; j < 15000; j++)
- {
- MM_Wait(10);
- }
-
- /* Deselect the channel register so we can read the PHY id later. */
- LM_WritePhy(pDevice, 0x10, 0x8011);
- }
-
- return LM_STATUS_SUCCESS;
-}
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_SetupFiberPhy(
- PLM_DEVICE_BLOCK pDevice)
-{
- LM_STATUS CurrentLinkStatus;
- AUTONEG_STATUS AnStatus = 0;
- LM_UINT32 Value32;
- LM_UINT32 Cnt;
- LM_UINT32 j, k;
- LM_UINT32 MacStatus, RemotePhyAd, LocalPhyAd;
- LM_FLOW_CONTROL PreviousFlowControl = pDevice->FlowControl;
-
-
- if (pDevice->LoopBackMode == LM_MAC_LOOP_BACK_MODE)
- {
- pDevice->LinkStatus = LM_STATUS_LINK_ACTIVE;
- MM_IndicateStatus(pDevice, LM_STATUS_LINK_ACTIVE);
- return LM_STATUS_SUCCESS;
- }
-
-
- if ((T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5704) &&
- (pDevice->LinkStatus == LM_STATUS_LINK_ACTIVE) && pDevice->InitDone)
- {
- MacStatus = REG_RD(pDevice, MacCtrl.Status);
- if ((MacStatus & (MAC_STATUS_PCS_SYNCED | MAC_STATUS_SIGNAL_DETECTED |
- MAC_STATUS_CFG_CHANGED | MAC_STATUS_RECEIVING_CFG))
- == (MAC_STATUS_PCS_SYNCED | MAC_STATUS_SIGNAL_DETECTED))
- {
-
- REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED);
- return LM_STATUS_SUCCESS;
- }
- }
- pDevice->MacMode &= ~(MAC_MODE_HALF_DUPLEX | MAC_MODE_PORT_MODE_MASK);
-
- /* Initialize the send_config register. */
- REG_WR(pDevice, MacCtrl.TxAutoNeg, 0);
-
- pDevice->MacMode |= MAC_MODE_PORT_MODE_TBI;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- MM_Wait(10);
-
- /* Initialize the BCM8002 SERDES PHY. */
- switch(pDevice->PhyId & PHY_ID_MASK)
- {
- case PHY_BCM8002_PHY_ID:
- LM_InitBcm800xPhy(pDevice);
- break;
-
- default:
- break;
- }
-
- /* Enable link change interrupt. */
- REG_WR(pDevice, MacCtrl.MacEvent, MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN);
-
- /* Default to link down. */
- CurrentLinkStatus = LM_STATUS_LINK_DOWN;
-
- /* Get the link status. */
- MacStatus = REG_RD(pDevice, MacCtrl.Status);
-
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704)
- {
- LM_UINT32 SgDigCtrl, SgDigStatus;
- LM_UINT32 SerdesCfg = 0;
- LM_UINT32 ExpectedSgDigCtrl = 0;
- LM_UINT32 WorkAround = 0;
- LM_UINT32 PortA = 1;
-
- if ((pDevice->ChipRevId != T3_CHIP_ID_5704_A0) &&
- (pDevice->ChipRevId != T3_CHIP_ID_5704_A1))
- {
- WorkAround = 1;
- if (REG_RD(pDevice, PciCfg.DualMacCtrl) & T3_DUAL_MAC_ID)
- {
- PortA = 0;
- }
-
- if(pDevice->TbiFlags & TBI_DO_PREEMPHASIS)
- {
- /* Save voltage reg bits & bits 14:0 */
- SerdesCfg = REG_RD(pDevice, MacCtrl.SerdesCfg) &
- (BIT_23 | BIT_22 | BIT_21 | BIT_20 | 0x7fff );
-
- }
- else
- {
- /* preserve the voltage regulator bits */
- SerdesCfg = REG_RD(pDevice, MacCtrl.SerdesCfg) &
- (BIT_23 | BIT_22 | BIT_21 | BIT_20);
- }
- }
- SgDigCtrl = REG_RD(pDevice, MacCtrl.SgDigControl);
- if((pDevice->RequestedLineSpeed == LM_LINE_SPEED_AUTO) ||
- (pDevice->DisableAutoNeg == FALSE))
- {
-
- ExpectedSgDigCtrl = 0x81388400;
- LocalPhyAd = GetPhyAdFlowCntrlSettings(pDevice);
- if(LocalPhyAd & PHY_AN_AD_PAUSE_CAPABLE)
- {
- ExpectedSgDigCtrl |= BIT_11;
- }
- if(LocalPhyAd & PHY_AN_AD_ASYM_PAUSE)
- {
- ExpectedSgDigCtrl |= BIT_12;
- }
- if (SgDigCtrl != ExpectedSgDigCtrl)
- {
- if (WorkAround)
- {
- if(pDevice->TbiFlags & TBI_DO_PREEMPHASIS)
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg, 0xc011000 | SerdesCfg);
- }
- else
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg, 0xc011880 | SerdesCfg);
- }
- }
- REG_WR(pDevice, MacCtrl.SgDigControl, ExpectedSgDigCtrl |
- BIT_30);
- REG_RD_BACK(pDevice, MacCtrl.SgDigControl);
- MM_Wait(5);
- REG_WR(pDevice, MacCtrl.SgDigControl, ExpectedSgDigCtrl);
- pDevice->AutoNegJustInited = TRUE;
- }
- /* If autoneg is off, you only get SD when link is up */
- else if(MacStatus & (MAC_STATUS_PCS_SYNCED |
- MAC_STATUS_SIGNAL_DETECTED))
- {
- SgDigStatus = REG_RD(pDevice, MacCtrl.SgDigStatus);
- if ((SgDigStatus & BIT_1) &&
- (MacStatus & MAC_STATUS_PCS_SYNCED))
- {
- /* autoneg. completed */
- RemotePhyAd = 0;
- if(SgDigStatus & BIT_19)
- {
- RemotePhyAd |= PHY_LINK_PARTNER_PAUSE_CAPABLE;
- }
-
- if(SgDigStatus & BIT_20)
- {
- RemotePhyAd |= PHY_LINK_PARTNER_ASYM_PAUSE;
- }
-
- LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd);
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- pDevice->AutoNegJustInited = FALSE;
- }
- else if (!(SgDigStatus & BIT_1))
- {
- if (pDevice->AutoNegJustInited == TRUE)
- {
- /* we may be checking too soon, so check again */
- /* at the next poll interval */
- pDevice->AutoNegJustInited = FALSE;
- }
- else
- {
- /* autoneg. failed */
- if (WorkAround)
- {
- if (PortA)
- {
- if(pDevice->TbiFlags & TBI_DO_PREEMPHASIS)
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg,
- 0xc010000 | (SerdesCfg & ~0x00001000));
- }
- else
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg,
- 0xc010880 | SerdesCfg);
- }
- }
- else
- {
- if(pDevice->TbiFlags & TBI_DO_PREEMPHASIS)
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg,
- 0x4010000 | (SerdesCfg & ~0x00001000));
- }
- else
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg,
- 0x4010880 | SerdesCfg);
- }
- }
- }
- /* turn off autoneg. to allow traffic to pass */
- REG_WR(pDevice, MacCtrl.SgDigControl, 0x01388400);
- REG_RD_BACK(pDevice, MacCtrl.SgDigControl);
- MM_Wait(40);
- MacStatus = REG_RD(pDevice, MacCtrl.Status);
- if ((MacStatus & MAC_STATUS_PCS_SYNCED) && !(MacStatus & MAC_STATUS_RECEIVING_CFG))
- {
- LM_SetFlowControl(pDevice, 0, 0);
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- }
- }
- }
- }
- }
- else
- {
- if (SgDigCtrl & BIT_31) {
- if (WorkAround)
- {
- if (PortA)
- {
-
- if(pDevice->TbiFlags & TBI_DO_PREEMPHASIS)
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg,
- 0xc010000 | (SerdesCfg & ~0x00001000));
- }
- else
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg,
- 0xc010880 | SerdesCfg);
- }
- }
- else
- {
- if(pDevice->TbiFlags & TBI_DO_PREEMPHASIS)
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg,
- 0x4010000 | (SerdesCfg & ~0x00001000));
- }
- else
- {
- REG_WR(pDevice, MacCtrl.SerdesCfg,
- 0x4010880 | SerdesCfg);
- }
- }
- }
- REG_WR(pDevice, MacCtrl.SgDigControl, 0x01388400);
- }
- if(MacStatus & MAC_STATUS_PCS_SYNCED)
- {
- LM_SetFlowControl(pDevice, 0, 0);
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- }
- }
- }
- else if(MacStatus & MAC_STATUS_PCS_SYNCED)
- {
- if((pDevice->RequestedLineSpeed == LM_LINE_SPEED_AUTO) ||
- (pDevice->DisableAutoNeg == FALSE))
- {
- /* auto-negotiation mode. */
- /* Initialize the autoneg default capaiblities. */
- AutonegInit(&pDevice->AnInfo);
-
- /* Set the context pointer to point to the main device structure. */
- pDevice->AnInfo.pContext = pDevice;
-
- /* Setup flow control advertisement register. */
- Value32 = GetPhyAdFlowCntrlSettings(pDevice);
- if(Value32 & PHY_AN_AD_PAUSE_CAPABLE)
- {
- pDevice->AnInfo.mr_adv_sym_pause = 1;
- }
- else
- {
- pDevice->AnInfo.mr_adv_sym_pause = 0;
- }
-
- if(Value32 & PHY_AN_AD_ASYM_PAUSE)
- {
- pDevice->AnInfo.mr_adv_asym_pause = 1;
- }
- else
- {
- pDevice->AnInfo.mr_adv_asym_pause = 0;
- }
-
- /* Try to autoneg up to six times. */
- if (pDevice->IgnoreTbiLinkChange)
- {
- Cnt = 1;
- }
- else
- {
- Cnt = 6;
- }
- for (j = 0; j < Cnt; j++)
- {
- REG_WR(pDevice, MacCtrl.TxAutoNeg, 0);
-
- Value32 = pDevice->MacMode & ~MAC_MODE_PORT_MODE_MASK;
- REG_WR(pDevice, MacCtrl.Mode, Value32);
- REG_RD_BACK(pDevice, MacCtrl.Mode);
- MM_Wait(20);
-
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
- MAC_MODE_SEND_CONFIGS);
- REG_RD_BACK(pDevice, MacCtrl.Mode);
-
- MM_Wait(20);
-
- pDevice->AnInfo.State = AN_STATE_UNKNOWN;
- pDevice->AnInfo.CurrentTime_us = 0;
-
- REG_WR(pDevice, Grc.Timer, 0);
- for(k = 0; (pDevice->AnInfo.CurrentTime_us < 75000) &&
- (k < 75000); k++)
- {
- AnStatus = Autoneg8023z(&pDevice->AnInfo);
-
- if((AnStatus == AUTONEG_STATUS_DONE) ||
- (AnStatus == AUTONEG_STATUS_FAILED))
- {
- break;
- }
-
- pDevice->AnInfo.CurrentTime_us = REG_RD(pDevice, Grc.Timer);
-
- }
- if((AnStatus == AUTONEG_STATUS_DONE) ||
- (AnStatus == AUTONEG_STATUS_FAILED))
- {
- break;
- }
- if (j >= 1)
- {
- if (!(REG_RD(pDevice, MacCtrl.Status) &
- MAC_STATUS_PCS_SYNCED)) {
- break;
- }
- }
- }
-
- /* Stop sending configs. */
- MM_AnTxIdle(&pDevice->AnInfo);
-
- /* Resolve flow control settings. */
- if((AnStatus == AUTONEG_STATUS_DONE) &&
- pDevice->AnInfo.mr_an_complete && pDevice->AnInfo.mr_link_ok &&
- pDevice->AnInfo.mr_lp_adv_full_duplex)
- {
- LM_UINT32 RemotePhyAd;
- LM_UINT32 LocalPhyAd;
-
- LocalPhyAd = 0;
- if(pDevice->AnInfo.mr_adv_sym_pause)
- {
- LocalPhyAd |= PHY_AN_AD_PAUSE_CAPABLE;
- }
-
- if(pDevice->AnInfo.mr_adv_asym_pause)
- {
- LocalPhyAd |= PHY_AN_AD_ASYM_PAUSE;
- }
-
- RemotePhyAd = 0;
- if(pDevice->AnInfo.mr_lp_adv_sym_pause)
- {
- RemotePhyAd |= PHY_LINK_PARTNER_PAUSE_CAPABLE;
- }
-
- if(pDevice->AnInfo.mr_lp_adv_asym_pause)
- {
- RemotePhyAd |= PHY_LINK_PARTNER_ASYM_PAUSE;
- }
-
- LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd);
-
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- }
- else
- {
- LM_SetFlowControl(pDevice, 0, 0);
- }
- for (j = 0; j < 30; j++)
- {
- MM_Wait(20);
- REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED);
- REG_RD_BACK(pDevice, MacCtrl.Status);
- MM_Wait(20);
- if ((REG_RD(pDevice, MacCtrl.Status) &
- (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0)
- break;
- }
- if (pDevice->TbiFlags & TBI_POLLING_FLAGS)
- {
- Value32 = REG_RD(pDevice, MacCtrl.Status);
- if (Value32 & MAC_STATUS_RECEIVING_CFG)
- {
- pDevice->IgnoreTbiLinkChange = TRUE;
- }
- else if (pDevice->TbiFlags & TBI_POLLING_INTR_FLAG)
- {
- pDevice->IgnoreTbiLinkChange = FALSE;
- }
- }
- Value32 = REG_RD(pDevice, MacCtrl.Status);
- if (CurrentLinkStatus == LM_STATUS_LINK_DOWN &&
- (Value32 & MAC_STATUS_PCS_SYNCED) &&
- ((Value32 & MAC_STATUS_RECEIVING_CFG) == 0))
- {
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- }
- }
- else
- {
- /* We are forcing line speed. */
- pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE;
- LM_SetFlowControl(pDevice, 0, 0);
-
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
- MAC_MODE_SEND_CONFIGS);
- }
- }
- /* Set the link polarity bit. */
- pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
-
- pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED |
- (pDevice->pStatusBlkVirt->Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS);
-
- for (j = 0; j < 100; j++)
- {
- REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED);
- REG_RD_BACK(pDevice, MacCtrl.Status);
- MM_Wait(5);
- if ((REG_RD(pDevice, MacCtrl.Status) &
- (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0)
- break;
- }
-
- Value32 = REG_RD(pDevice, MacCtrl.Status);
- if((Value32 & MAC_STATUS_PCS_SYNCED) == 0)
- {
- CurrentLinkStatus = LM_STATUS_LINK_DOWN;
- if (pDevice->DisableAutoNeg == FALSE)
- {
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode |
- MAC_MODE_SEND_CONFIGS);
- REG_RD_BACK(pDevice, MacCtrl.Mode);
- MM_Wait(1);
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- }
- }
-
- /* Initialize the current link status. */
- if(CurrentLinkStatus == LM_STATUS_LINK_ACTIVE)
- {
- pDevice->LineSpeed = LM_LINE_SPEED_1000MBPS;
- pDevice->DuplexMode = LM_DUPLEX_MODE_FULL;
- REG_WR(pDevice, MacCtrl.LedCtrl, pDevice->LedCtrl |
- LED_CTRL_OVERRIDE_LINK_LED |
- LED_CTRL_1000MBPS_LED_ON);
- }
- else
- {
- pDevice->LineSpeed = LM_LINE_SPEED_UNKNOWN;
- pDevice->DuplexMode = LM_DUPLEX_MODE_UNKNOWN;
- REG_WR(pDevice, MacCtrl.LedCtrl, pDevice->LedCtrl |
- LED_CTRL_OVERRIDE_LINK_LED |
- LED_CTRL_OVERRIDE_TRAFFIC_LED);
- }
-
- /* Indicate link status. */
- if ((pDevice->LinkStatus != CurrentLinkStatus) ||
- ((CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) &&
- (PreviousFlowControl != pDevice->FlowControl)))
- {
- pDevice->LinkStatus = CurrentLinkStatus;
- MM_IndicateStatus(pDevice, CurrentLinkStatus);
- }
-
- return LM_STATUS_SUCCESS;
-}
-#endif /* INCLUDE_TBI_SUPPORT */
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS
-LM_SetupCopperPhy(
- PLM_DEVICE_BLOCK pDevice)
-{
- LM_STATUS CurrentLinkStatus;
- LM_UINT32 Value32;
-
- /* Assume there is not link first. */
- CurrentLinkStatus = LM_STATUS_LINK_DOWN;
-
- /* Disable phy link change attention. */
- REG_WR(pDevice, MacCtrl.MacEvent, 0);
-
- /* Clear link change attention. */
- REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED | MAC_STATUS_MI_COMPLETION |
- MAC_STATUS_LINK_STATE_CHANGED);
-
- /* Disable auto-polling for the moment. */
- pDevice->MiMode = 0xc0000;
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
- REG_RD_BACK(pDevice, MacCtrl.MiMode);
- MM_Wait(40);
-
- /* Determine the requested line speed and duplex. */
- pDevice->OldLineSpeed = pDevice->LineSpeed;
- /* Set line and duplex only if we don't have a Robo switch */
- if (!(pDevice->Flags & ROBO_SWITCH_FLAG)) {
- pDevice->LineSpeed = pDevice->RequestedLineSpeed;
- pDevice->DuplexMode = pDevice->RequestedDuplexMode;
- }
-
- /* Set the phy to loopback mode. */
- if ((pDevice->LoopBackMode == LM_PHY_LOOP_BACK_MODE) ||
- (pDevice->LoopBackMode == LM_MAC_LOOP_BACK_MODE))
- {
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
- if(!(Value32 & PHY_CTRL_LOOPBACK_MODE) &&
- (pDevice->LoopBackMode == LM_PHY_LOOP_BACK_MODE))
- {
- /* Disable link change and PHY interrupts. */
- REG_WR(pDevice, MacCtrl.MacEvent, 0);
-
- /* Clear link change attention. */
- REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED);
-
- LM_WritePhy(pDevice, PHY_CTRL_REG, 0x4140);
- MM_Wait(40);
-
- pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY;
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5703 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705 ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 &&
- (pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5411_PHY_ID))
- {
- pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
- }
-
- /* Prevent the interrupt handling from being called. */
- pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED |
- (pDevice->pStatusBlkVirt->Status &
- ~STATUS_BLOCK_LINK_CHANGED_STATUS);
-
- /* GMII interface. */
- pDevice->MacMode &= ~MAC_MODE_PORT_MODE_MASK;
- pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- REG_RD_BACK(pDevice, MacCtrl.Mode);
- MM_Wait(40);
-
- /* Configure PHY led mode. */
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701 ||
- (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700))
- {
- LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG,
- BCM540X_EXT_CTRL_LINK3_LED_MODE);
- MM_Wait(40);
- }
-
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- int j = 0;
-
- while (REG_RD(pDevice, DmaWrite.Mode) & DMA_WRITE_MODE_ENABLE)
- {
- MM_Wait(40);
- j++;
- if (j > 20)
- break;
- }
-
- Value32 = DMA_WRITE_MODE_ENABLE |
- DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE |
- DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE |
- DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE |
- DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
- DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE |
- DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
- DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE |
- DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE;
- REG_WR(pDevice, DmaWrite.Mode, Value32);
- }
- }
-
- pDevice->LinkStatus = LM_STATUS_LINK_ACTIVE;
- MM_IndicateStatus(pDevice, LM_STATUS_LINK_ACTIVE);
-
- return LM_STATUS_SUCCESS;
- }
-
- /* For Robo switch read PHY_CTRL_REG value as zero */
- if (pDevice->Flags & ROBO_SWITCH_FLAG)
- Value32 = 0;
- else
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
-
- if(Value32 & PHY_CTRL_LOOPBACK_MODE)
- {
- CurrentLinkStatus = LM_STATUS_LINK_DOWN;
-
- /* Re-enable link change interrupt. This was disabled when we */
- /* enter loopback mode. */
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT)
- {
- REG_WR(pDevice, MacCtrl.MacEvent, MAC_EVENT_ENABLE_MI_INTERRUPT);
- }
- else
- {
- REG_WR(pDevice, MacCtrl.MacEvent,
- MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN);
- }
- }
- else
- {
- /* Initialize the phy chip. */
- CurrentLinkStatus = LM_InitBcm540xPhy(pDevice);
- }
-
- if(CurrentLinkStatus == LM_STATUS_LINK_SETTING_MISMATCH)
- {
- CurrentLinkStatus = LM_STATUS_LINK_DOWN;
- }
-
- /* Setup flow control. */
- pDevice->FlowControl = LM_FLOW_CONTROL_NONE;
- if(CurrentLinkStatus == LM_STATUS_LINK_ACTIVE)
- {
- LM_FLOW_CONTROL FlowCap; /* Flow control capability. */
-
- FlowCap = LM_FLOW_CONTROL_NONE;
-
- if(pDevice->DuplexMode == LM_DUPLEX_MODE_FULL)
- {
- if(pDevice->DisableAutoNeg == FALSE ||
- pDevice->RequestedLineSpeed == LM_LINE_SPEED_AUTO)
- {
- LM_UINT32 ExpectedPhyAd;
- LM_UINT32 LocalPhyAd;
- LM_UINT32 RemotePhyAd;
-
- LM_ReadPhy(pDevice, PHY_AN_AD_REG, &LocalPhyAd);
- pDevice->advertising = LocalPhyAd;
- LocalPhyAd &= (PHY_AN_AD_ASYM_PAUSE | PHY_AN_AD_PAUSE_CAPABLE);
-
- ExpectedPhyAd = GetPhyAdFlowCntrlSettings(pDevice);
-
- if(LocalPhyAd != ExpectedPhyAd)
- {
- CurrentLinkStatus = LM_STATUS_LINK_DOWN;
- }
- else
- {
- LM_ReadPhy(pDevice, PHY_LINK_PARTNER_ABILITY_REG,
- &RemotePhyAd);
-
- LM_SetFlowControl(pDevice, LocalPhyAd, RemotePhyAd);
- }
- }
- else
- {
- pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE;
- LM_SetFlowControl(pDevice, 0, 0);
- }
- }
- }
-
- if(CurrentLinkStatus == LM_STATUS_LINK_DOWN)
- {
- LM_ForceAutoNeg(pDevice);
-
- /* If we force line speed, we make get link right away. */
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- if(Value32 & PHY_STATUS_LINK_PASS)
- {
- CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
- }
- }
-
- /* GMII interface. */
- pDevice->MacMode &= ~MAC_MODE_PORT_MODE_MASK;
- if(CurrentLinkStatus == LM_STATUS_LINK_ACTIVE)
- {
- if(pDevice->LineSpeed == LM_LINE_SPEED_100MBPS ||
- pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)
- {
- pDevice->MacMode |= MAC_MODE_PORT_MODE_MII;
- }
- else
- {
- pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
- }
- }
- else {
- pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
- }
-
- /* In order for the 5750 core in BCM4785 chip to work properly
- * in RGMII mode, the Led Control Register must be set up.
- */
- if (pDevice->Flags & RGMII_MODE_FLAG)
- {
- LM_UINT32 LedCtrl_Reg;
-
- LedCtrl_Reg = REG_RD(pDevice, MacCtrl.LedCtrl);
- LedCtrl_Reg &= ~(LED_CTRL_1000MBPS_LED_ON | LED_CTRL_100MBPS_LED_ON);
-
- if(pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)
- LedCtrl_Reg |= LED_CTRL_OVERRIDE_LINK_LED;
- else if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS)
- LedCtrl_Reg |= (LED_CTRL_OVERRIDE_LINK_LED | LED_CTRL_100MBPS_LED_ON);
- else /* LM_LINE_SPEED_1000MBPS */
- LedCtrl_Reg |= (LED_CTRL_OVERRIDE_LINK_LED | LED_CTRL_1000MBPS_LED_ON);
-
- REG_WR(pDevice, MacCtrl.LedCtrl, LedCtrl_Reg);
-
- MM_Wait(40);
- }
-
- /* Set the MAC to operate in the appropriate duplex mode. */
- pDevice->MacMode &= ~MAC_MODE_HALF_DUPLEX;
- if(pDevice->DuplexMode == LM_DUPLEX_MODE_HALF)
- {
- pDevice->MacMode |= MAC_MODE_HALF_DUPLEX;
- }
-
- /* Set the link polarity bit. */
- pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY;
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- if((pDevice->LedCtrl == LED_CTRL_PHY_MODE_2) ||
- (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE &&
- pDevice->LineSpeed == LM_LINE_SPEED_10MBPS))
- {
- pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
- }
- }
- else
- {
- if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE)
- {
- pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
- }
- }
-
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
-
- /* Enable auto polling. */
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
- {
- pDevice->MiMode |= MI_MODE_AUTO_POLLING_ENABLE;
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
- }
- /* if using MAC led mode and not using auto polling, need to configure */
- /* mi status register */
- else if ((pDevice->LedCtrl &
- (LED_CTRL_PHY_MODE_1 | LED_CTRL_PHY_MODE_2)) == 0)
- {
- if (CurrentLinkStatus != LM_STATUS_LINK_ACTIVE)
- {
- REG_WR(pDevice, MacCtrl.MiStatus, 0);
- }
- else if (pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)
- {
- REG_WR(pDevice, MacCtrl.MiStatus,
- MI_STATUS_ENABLE_LINK_STATUS_ATTN | MI_STATUS_10MBPS);
- }
- else
- {
- REG_WR(pDevice, MacCtrl.MiStatus,
- MI_STATUS_ENABLE_LINK_STATUS_ATTN);
- }
- }
-
- /* Enable phy link change attention. */
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT)
- {
- REG_WR(pDevice, MacCtrl.MacEvent, MAC_EVENT_ENABLE_MI_INTERRUPT);
- }
- else
- {
- REG_WR(pDevice, MacCtrl.MacEvent,
- MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN);
- }
- if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) &&
- (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) &&
- (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) &&
- (((pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) &&
- (pDevice->PciState & T3_PCI_STATE_BUS_SPEED_HIGH)) ||
- !(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)))
- {
- MM_Wait(120);
- REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED);
- MEM_WR_OFFSET(pDevice, T3_FIRMWARE_MAILBOX,
- T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE);
- }
-
- /* Indicate link status. */
- if (pDevice->LinkStatus != CurrentLinkStatus) {
- pDevice->LinkStatus = CurrentLinkStatus;
- MM_IndicateStatus(pDevice, CurrentLinkStatus);
- }
-
- return LM_STATUS_SUCCESS;
-} /* LM_SetupCopperPhy */
-
-
-void
-LM_5714_FamForceFiber(
- PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 Creg, new_bmcr;
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Creg);
-
- new_bmcr = Creg & ~PHY_CTRL_AUTO_NEG_ENABLE;
-
- if ( pDevice->RequestedDuplexMode == 0 ||
- pDevice->RequestedDuplexMode == LM_DUPLEX_MODE_FULL){
-
- new_bmcr |= PHY_CTRL_FULL_DUPLEX_MODE;
- }
-
- if(Creg == new_bmcr)
- return;
-
- new_bmcr |= PHY_CTRL_SPEED_SELECT_1000MBPS; /* Reserve bit */
-
- /* Force a linkdown */
- LM_WritePhy(pDevice, PHY_AN_AD_REG, 0);
- LM_WritePhy(pDevice, PHY_CTRL_REG, new_bmcr |
- PHY_CTRL_RESTART_AUTO_NEG |
- PHY_CTRL_AUTO_NEG_ENABLE |
- PHY_CTRL_SPEED_SELECT_1000MBPS);
- MM_Wait(10);
-
- /* Force it */
- LM_WritePhy(pDevice, PHY_CTRL_REG, new_bmcr);
- MM_Wait(10);
-
- return;
-
-}/* LM_5714_FamForceFiber */
-
-
-void
-LM_5714_FamGoFiberAutoNeg(
- PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 adv,Creg,new;
-
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Creg);
- LM_ReadPhy(pDevice,PHY_AN_AD_REG, &adv);
-
- new = adv & ~( PHY_AN_AD_1000XFULL |
- PHY_AN_AD_1000XHALF |
- PHY_AN_AD_1000XPAUSE |
- PHY_AN_AD_1000XPSE_ASYM |
- 0x1f);
-
- new |= PHY_AN_AD_1000XPAUSE;
-
- new |= PHY_AN_AD_1000XFULL;
- new |= PHY_AN_AD_1000XHALF;
-
- if ((new != adv) || !(Creg & PHY_CTRL_AUTO_NEG_ENABLE)){
- LM_WritePhy(pDevice, PHY_AN_AD_REG, new);
- MM_Wait(5);
- pDevice->AutoNegJustInited=1;
- LM_WritePhy(pDevice, PHY_CTRL_REG, (Creg |
- PHY_CTRL_RESTART_AUTO_NEG |
- PHY_CTRL_SPEED_SELECT_1000MBPS |
- PHY_CTRL_AUTO_NEG_ENABLE) );
- }
-
- return;
-} /* 5714_FamGoFiberAutoNeg */
-
-
-void
-LM_5714_FamDoFiberLoopback(PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 Value32;
-
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
-
- if( !(Value32 & PHY_CTRL_LOOPBACK_MODE) )
- {
- LM_WritePhy(pDevice, PHY_CTRL_REG, 0x4140);
-
- /* Prevent the interrupt handling from being called. */
- pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED |
- (pDevice->pStatusBlkVirt->Status &
- ~STATUS_BLOCK_LINK_CHANGED_STATUS);
- }
-
- pDevice->LinkStatus = LM_STATUS_LINK_ACTIVE;
- MM_IndicateStatus(pDevice, LM_STATUS_LINK_ACTIVE);
-
- return;
-
-}/* 5714_FamDoFiberLoopBack */
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-
-LM_STATUS
-LM_SetupNewFiberPhy(
- PLM_DEVICE_BLOCK pDevice)
-{
- LM_STATUS LmStatus = LM_STATUS_SUCCESS;
- LM_UINT32 Creg,Sreg,rsav;
-
- rsav = pDevice->LinkStatus;
-
- pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- MM_Wait(40);
-
- /* Disable phy link change attention. */
- REG_WR(pDevice, MacCtrl.MacEvent, 0);
-
- /* Clear link change attention. */
- REG_WR(pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
- MAC_STATUS_CFG_CHANGED | MAC_STATUS_MI_COMPLETION |
- MAC_STATUS_LINK_STATE_CHANGED);
-
-
- if( (pDevice->PhyFlags & PHY_FIBER_FALLBACK) &&
- ( pDevice->RequestedLineSpeed == LM_LINE_SPEED_AUTO) ){
-
- /* do nothing */
- }else if ( pDevice->LoopBackMode == LM_MAC_LOOP_BACK_MODE){
-
- LM_5714_FamDoFiberLoopback(pDevice);
- goto fiberloopbackreturn;
-
- } else if( pDevice->RequestedLineSpeed == LM_LINE_SPEED_AUTO) {
-
- LM_5714_FamGoFiberAutoNeg(pDevice);
-
-
- }else {
-
- LM_5714_FamForceFiber(pDevice);
- }
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Sreg);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Sreg);
-
- if(Sreg & PHY_STATUS_LINK_PASS){
-
- pDevice->LinkStatus = LM_STATUS_LINK_ACTIVE;
- pDevice->LineSpeed = LM_LINE_SPEED_1000MBPS;
-
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Creg);
-
- if(Creg & PHY_CTRL_FULL_DUPLEX_MODE) {
- pDevice->DuplexMode = LM_DUPLEX_MODE_FULL;
- }else{
- pDevice->DuplexMode = LM_DUPLEX_MODE_HALF;
- pDevice->MacMode |= MAC_MODE_HALF_DUPLEX;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- }
-
- if(Creg & PHY_CTRL_AUTO_NEG_ENABLE){
- LM_UINT32 ours,partner;
-
- LM_ReadPhy(pDevice,PHY_AN_AD_REG, &ours);
- LM_ReadPhy(pDevice,PHY_LINK_PARTNER_ABILITY_REG, &partner);
- LM_SetFlowControl(pDevice, ours, partner);
- }
-
- }else{
- pDevice->LinkStatus = LM_STATUS_LINK_DOWN;
- pDevice->LineSpeed = 0;
- }
-
- if(rsav != pDevice->LinkStatus)
- MM_IndicateStatus(pDevice, pDevice->LinkStatus);
-
-fiberloopbackreturn:
- pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- MM_Wait(40);
- /* Enable link change interrupt. */
- REG_WR(pDevice, MacCtrl.MacEvent, MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN);
-
- return LmStatus;
-} /* Setup New phy */
-
-void
-LM_5714_FamFiberCheckLink(
- PLM_DEVICE_BLOCK pDevice)
-{
-
- if(pDevice->AutoNegJustInited){
- pDevice->AutoNegJustInited=0;
- return;
- }
-
- if ((pDevice->LinkStatus != LM_STATUS_LINK_ACTIVE) &&
- (pDevice->RequestedLineSpeed == LM_LINE_SPEED_AUTO) &&
- !(pDevice->PhyFlags & PHY_FIBER_FALLBACK)){
- LM_UINT32 bmcr;
-
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &bmcr);
- if (bmcr & PHY_CTRL_AUTO_NEG_ENABLE) {
- LM_UINT32 phy1, phy2;
-
- LM_WritePhy(pDevice, 0x1c, 0x7c00);
- LM_ReadPhy(pDevice, 0x1c, &phy1);
-
- LM_WritePhy(pDevice, 0x17, 0x0f01);
- LM_ReadPhy(pDevice, 0x15, &phy2);
- LM_ReadPhy(pDevice, 0x15, &phy2);
-
- if ((phy1 & 0x10) && !(phy2 & 0x20)) {
-
- /* We have signal detect and not receiving
- * configs.
- */
-
- pDevice->PhyFlags |= PHY_FIBER_FALLBACK;
- LM_5714_FamForceFiber(pDevice);
- }
- }
- }
- else if ( (pDevice->PhyFlags & PHY_FIBER_FALLBACK) &&
- (pDevice->RequestedLineSpeed == LM_LINE_SPEED_AUTO)) {
- LM_UINT32 phy2;
-
- LM_WritePhy(pDevice, 0x17, 0x0f01);
- LM_ReadPhy(pDevice, 0x15, &phy2);
- if (phy2 & 0x20) {
- /* Receiving configs. */
-
- pDevice->PhyFlags &= ~PHY_FIBER_FALLBACK;
- LM_5714_FamGoFiberAutoNeg(pDevice);
- }
- }
-
-} /* LM_5714_FamFiberCheckLink */
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS
-LM_SetupPhy(
- PLM_DEVICE_BLOCK pDevice)
-{
- LM_STATUS LmStatus;
- LM_UINT32 Value32;
-
- if(pDevice->PhyFlags & PHY_IS_FIBER)
- {
- LmStatus = LM_SetupNewFiberPhy(pDevice);
- }else
-#ifdef INCLUDE_TBI_SUPPORT
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- {
- LmStatus = LM_SetupFiberPhy(pDevice);
- }
- else
-#endif /* INCLUDE_TBI_SUPPORT */
- {
- LmStatus = LM_SetupCopperPhy(pDevice);
- }
- if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0)
- {
- if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))
- {
- Value32 = REG_RD(pDevice, PciCfg.PciState);
- REG_WR(pDevice, PciCfg.PciState,
- Value32 | T3_PCI_STATE_RETRY_SAME_DMA);
- }
- }
- if ((pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) &&
- (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF))
- {
- REG_WR(pDevice, MacCtrl.TxLengths, 0x26ff);
- }
- else
- {
- REG_WR(pDevice, MacCtrl.TxLengths, 0x2620);
- }
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- if (pDevice->LinkStatus == LM_STATUS_LINK_DOWN)
- {
- REG_WR(pDevice, HostCoalesce.StatsCoalescingTicks, 0);
- }
- else
- {
- REG_WR(pDevice, HostCoalesce.StatsCoalescingTicks,
- pDevice->StatsCoalescingTicks);
- }
- }
-
- return LmStatus;
-}
-
-
-/* test data pattern */
-static LM_UINT32 pattern[4][6] = {
- /* For 5703/04, each DFE TAP has 21-bits (low word 15, hi word 6)
- For 5705 , each DFE TAP has 19-bits (low word 15, hi word 4)
- For simplicity, we check only 19-bits, so we don't have to
- distinguish which chip it is.
- the LO word contains 15 bits, make sure pattern data is < 0x7fff
- the HI word contains 6 bits, make sure pattern data is < 0x003f */
- {0x00005555, 0x00000005, /* ch0, TAP 0, LO/HI pattern */
- 0x00002aaa, 0x0000000a, /* ch0, TAP 1, LO/HI pattern */
- 0x00003456, 0x00000003}, /* ch0, TAP 2, LO/HI pattern */
-
- {0x00002aaa, 0x0000000a, /* ch1, TAP 0, LO/HI pattern */
- 0x00003333, 0x00000003, /* ch1, TAP 1, LO/HI pattern */
- 0x0000789a, 0x00000005}, /* ch1, TAP 2, LO/HI pattern */
-
- {0x00005a5a, 0x00000005, /* ch2, TAP 0, LO/HI pattern */
- 0x00002a6a, 0x0000000a, /* ch2, TAP 1, LO/HI pattern */
- 0x00001bcd, 0x00000003}, /* ch2, TAP 2, LO/HI pattern */
-
- {0x00002a5a, 0x0000000a, /* ch3, TAP 0, LO/HI pattern */
- 0x000033c3, 0x00000003, /* ch3, TAP 1, LO/HI pattern */
- 0x00002ef1, 0x00000005}, /* ch3, TAP 2, LO/HI pattern */
-};
-
-/********************************************************/
-/* Routine to wait for PHY Macro Command to complete */
-/* */
-/* If PHY's Macro operation keeps stay busy, nothing we */
-/* can do anyway. The timeout is there so we won't */
-/* stay in this routine indefinitly. */
-/********************************************************/
-static LM_UINT32 LM_wait_macro_done(LM_DEVICE_BLOCK *pDevice);
-
-static LM_UINT32
-LM_wait_macro_done(LM_DEVICE_BLOCK *pDevice)
-{
- LM_UINT32 timeout;
- LM_UINT32 val32;
-
- timeout = 100;
- while (timeout--)
- {
- /* make sure the MACRO operation is complete */
- LM_ReadPhy(pDevice, 0x16, &val32);
- if ((val32 & 0x1000) == 0) break;
- }
-
- return( timeout > 0 );
-}
-
-/********************************************************/
-/* This routine resets the PHY on following chips: */
-/* 5703, 04, CIOB-E and 5705 */
-/* */
-/* This routine will issue PHY_RESET and check if */
-/* the reset is sucessful. If not, another PHY RESET */
-/* will be issued, until max "retry" reaches */
-/* */
-/* Input: */
-/* pDevice - device's context */
-/* retry - number of retries */
-/* reset - TRUE=will cause a PHY reset initially */
-/* FALSE = will not issue a PHY reset */
-/* unless TAP lockup detected */
-/* */
-/* Output: */
-/* TRUE - PHY Reset is done sucessfully */
-/* FALSE - PHY Reset had failed, after "retry" */
-/* has reached */
-/* */
-/* Dependencies: */
-/* void LM_wait_macro_done() */
-/* LM_UINT32 pattern[] */
-/* */
-/* Usage: */
-/* a. Before calling this routine, caller must */
-/* determine if the chip is a 5702/03/04 or */
-/* CIOB-E, and only call this routine if the */
-/* is one of these. */
-/* or its derivatives. */
-/* b. Instead of using MII register write to reset */
-/* the PHY, call this routine instead */
-/* c. Upon return from this routine, check return */
-/* value (TRUE/FALSE) to determine if PHY reset */
-/* is successful of not and "optionally" take */
-/* appropriate action (such as: event log) */
-/* d. Regardless of the return TRUE or FALSE, */
-/* proceed with PHY setup as you normally would */
-/* after a PHY_RESET. */
-/* e. It is recommended that the caller will give */
-/* 10 "retry", however, caller can change to a */
-/* different number, depending on you code. */
-/* */
-/********************************************************/
-LM_STATUS LM_ResetPhy_5703_4_5(LM_DEVICE_BLOCK *pDevice, int retry, int reset);
-
-LM_STATUS
-LM_ResetPhy_5703_4_5(LM_DEVICE_BLOCK *pDevice, int retry, int reset)
-{
- LM_UINT32 val32, save9;
- LM_UINT32 dataLo, dataHi;
- int i, channel;
- int reset_success = LM_STATUS_FAILURE;
- int force_reset;
-
- /* to actually do a PHY_RESET or not is dictated by the caller */
- force_reset = reset;
-
- while (retry-- && (reset_success != LM_STATUS_SUCCESS))
- {
- if (force_reset)
- {
- /* issue a phy reset, and wait for reset to complete */
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET);
- for(i = 0; i < 100; i++)
- {
- MM_Wait(10);
-
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &val32);
- if(val32 && !(val32 & PHY_CTRL_PHY_RESET))
- {
- MM_Wait(20);
- break;
- }
- }
-
- /* no more phy reset unless lockup detected */
- force_reset = FALSE;
- }
-
- /* assuming reset is successful first */
- reset_success = LM_STATUS_SUCCESS;
-
- /* now go check the DFE TAPs to see if locked up, but
- first, we need to set up PHY so we can read DFE TAPs */
-
- /* Disable Transmitter and Interrupt, while we play with
- the PHY registers, so the link partner won't see any
- strange data and the Driver won't see any interrupts. */
- LM_ReadPhy(pDevice, 0x10, &val32);
- LM_WritePhy(pDevice, 0x10, val32 | 0x3000);
-
- /* Setup Full-Duplex, 1000 mbps */
- LM_WritePhy(pDevice, 0x0, 0x0140);
-
- /* Set to Master mode */
- LM_ReadPhy(pDevice, 0x9, &save9);
- LM_WritePhy(pDevice, 0x9, 0x1800);
-
- /* Enable SM_DSP_CLOCK & 6dB */
- LM_WritePhy(pDevice, 0x18, 0x0c00);
-
- /* blocks the PHY control access */
- LM_WritePhy(pDevice, 0x17, 0x8005);
- LM_WritePhy(pDevice, 0x15, 0x0800);
-
- /* check TAPs for all 4 channels, as soon
- as we see a lockup we'll stop checking */
- for (channel=0; (channel<4) && (reset_success == LM_STATUS_SUCCESS);
- channel++)
- {
- /* select channel and set TAP index to 0 */
- LM_WritePhy(pDevice, 0x17, (channel * 0x2000) | 0x0200);
- /* freeze filter again just to be safe */
- LM_WritePhy(pDevice, 0x16, 0x0002);
-
- /* write fixed pattern to the RAM, 3 TAPs for
- each channel, each TAP have 2 WORDs (LO/HI) */
- for (i=0; i<6; i++)
- LM_WritePhy(pDevice, 0x15, pattern[channel][i]);
-
- /* Activate PHY's Macro operation to write DFE TAP from RAM,
- and wait for Macro to complete */
- LM_WritePhy(pDevice, 0x16, 0x0202);
- if (!LM_wait_macro_done(pDevice))
- {
- reset_success = LM_STATUS_FAILURE;
- force_reset = TRUE;
- break;
- }
-
- /* --- done with write phase, now begin read phase --- */
-
- /* select channel and set TAP index to 0 */
- LM_WritePhy(pDevice, 0x17, (channel * 0x2000) | 0x0200);
-
- /* Active PHY's Macro operation to load DFE TAP to RAM,
- and wait for Macro to complete */
- LM_WritePhy(pDevice, 0x16, 0x0082);
- if (!LM_wait_macro_done(pDevice))
- {
- reset_success = LM_STATUS_FAILURE;
- force_reset = TRUE;
- break;
- }
-
- /* enable "pre-fetch" */
- LM_WritePhy(pDevice, 0x16, 0x0802);
- if (!LM_wait_macro_done(pDevice))
- {
- reset_success = LM_STATUS_FAILURE;
- force_reset = TRUE;
- break;
- }
-
- /* read back the TAP values.
- 3 TAPs for each channel, each TAP have 2 WORDs (LO/HI) */
- for (i=0; i<6; i+=2)
- {
- /* read Lo/Hi then wait for 'done' is faster */
- LM_ReadPhy(pDevice, 0x15, &dataLo);
- LM_ReadPhy(pDevice, 0x15, &dataHi);
- if (!LM_wait_macro_done(pDevice))
- {
- reset_success = LM_STATUS_FAILURE;
- force_reset = TRUE;
- break;
- }
-
- /* For 5703/04, each DFE TAP has 21-bits (low word 15,
- * hi word 6) For 5705, each DFE TAP pas 19-bits (low word 15,
- * hi word 4) For simplicity, we check only 19-bits, so we
- * don't have to distinguish which chip it is. */
- dataLo &= 0x7fff;
- dataHi &= 0x000f;
-
- /* check if what we wrote is what we read back */
- if ( (dataLo != pattern[channel][i]) || (dataHi != pattern[channel][i+1]) )
- {
- /* if failed, then the PHY is locked up,
- we need to do PHY reset again */
- reset_success = LM_STATUS_FAILURE;
- force_reset = TRUE;
- /* 04/25/2003. sb. do these writes before issueing a reset. */
- /* these steps will reduce the chance of back-to-back
- * phy lockup after reset */
- LM_WritePhy(pDevice, 0x17, 0x000B);
- LM_WritePhy(pDevice, 0x15, 0x4001);
- LM_WritePhy(pDevice, 0x15, 0x4005);
- break;
- }
- } /* for i */
- } /* for channel */
- } /* while */
-
- /* restore dfe coeff back to zeros */
- for (channel=0; channel<4 ; channel++)
- {
- LM_WritePhy(pDevice, 0x17, (channel * 0x2000) | 0x0200);
- LM_WritePhy(pDevice, 0x16, 0x0002);
- for (i=0; i<6; i++)
- LM_WritePhy(pDevice, 0x15, 0x0000);
- LM_WritePhy(pDevice, 0x16, 0x0202);
- if (!LM_wait_macro_done(pDevice))
- {
- reset_success = LM_STATUS_FAILURE;
- break;
- }
- }
-
- /* remove block phy control */
- LM_WritePhy(pDevice, 0x17, 0x8005);
- LM_WritePhy(pDevice, 0x15, 0x0000);
-
- /* unfreeze DFE TAP filter for all channels */
- LM_WritePhy(pDevice, 0x17, 0x8200);
- LM_WritePhy(pDevice, 0x16, 0x0000);
-
- /* Restore PHY back to operating state */
- LM_WritePhy(pDevice, 0x18, 0x0400);
-
- /* Restore register 9 */
- LM_WritePhy(pDevice, 0x9, save9);
-
- /* enable transmitter and interrupt */
- LM_ReadPhy(pDevice, 0x10, &val32);
- LM_WritePhy(pDevice, 0x10, (val32 & ~0x3000));
-
- return reset_success;
-}
-
-LM_VOID
-LM_ResetPhy(LM_DEVICE_BLOCK *pDevice)
-{
- int j;
- LM_UINT32 miireg;
-
- if (pDevice->PhyFlags & PHY_CHECK_TAPS_AFTER_RESET)
- {
- LM_ResetPhy_5703_4_5(pDevice, 5, 1);
- }
- else
- {
- int wait_val = 100;
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET);
-
- if( pDevice->PhyFlags & PHY_IS_FIBER )
- wait_val = 5000;
-
- for(j = 0; j < wait_val; j++)
- {
- MM_Wait(10);
-
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &miireg);
- if(miireg && !(miireg & PHY_CTRL_PHY_RESET))
- {
- MM_Wait(20);
- break;
- }
- }
-
- LM_PhyTapPowerMgmt(pDevice);
- }
- if ( (pDevice->PhyFlags & PHY_ADC_FIX) &&
- !( pDevice->PhyFlags & PHY_IS_FIBER) )
- {
- LM_WritePhy(pDevice, 0x18, 0x0c00);
- LM_WritePhy(pDevice, 0x17, 0x201f);
- LM_WritePhy(pDevice, 0x15, 0x2aaa);
- LM_WritePhy(pDevice, 0x17, 0x000a);
- LM_WritePhy(pDevice, 0x15, 0x0323);
- LM_WritePhy(pDevice, 0x18, 0x0400);
- }
- if ( (pDevice->PhyFlags & PHY_5705_5750_FIX) &&
- !( pDevice->PhyFlags & PHY_IS_FIBER) )
- {
- LM_WritePhy(pDevice, 0x18, 0x0c00);
- LM_WritePhy(pDevice, 0x17, 0x000a);
- LM_WritePhy(pDevice, 0x15, 0x310b);
- LM_WritePhy(pDevice, 0x17, 0x201f);
- LM_WritePhy(pDevice, 0x15, 0x9506);
- LM_WritePhy(pDevice, 0x17, 0x401f);
- LM_WritePhy(pDevice, 0x15, 0x14e2);
- LM_WritePhy(pDevice, 0x18, 0x0400);
- }
- if ( (pDevice->PhyFlags & PHY_5704_A0_FIX) &&
- !( pDevice->PhyFlags & PHY_IS_FIBER) )
- {
- LM_WritePhy(pDevice, 0x1c, 0x8d68);
- LM_WritePhy(pDevice, 0x1c, 0x8d68);
- }
- if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
- {
- LM_ReadPhy(pDevice, BCM540X_EXT_CTRL_REG, &miireg);
- miireg |= 1; /* set tx elastic fifo */
- LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, miireg);
-
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x4c20);
- }
- else if (pDevice->Flags & JUMBO_CAPABLE_FLAG)
- {
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0007);
- LM_ReadPhy(pDevice, BCM5401_AUX_CTRL, &miireg);
- miireg |= 0x4000; /* set rx extended packet length */
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, miireg);
-
- LM_ReadPhy(pDevice, BCM540X_EXT_CTRL_REG, &miireg);
- miireg |= 1; /* set tx elastic fifo */
- LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, miireg);
-
- }
-
- LM_SetEthWireSpeed(pDevice);
- pDevice->PhyFlags &= ~PHY_FIBER_FALLBACK;
-}
-
-STATIC LM_VOID
-LM_SetEthWireSpeed(LM_DEVICE_BLOCK *pDevice)
-{
- LM_UINT32 Value32;
-
- if( pDevice->PhyFlags & PHY_IS_FIBER)
- return;
-
- /* Enable Ethernet@WireSpeed. */
- if (pDevice->PhyFlags & PHY_ETHERNET_WIRESPEED)
- {
- LM_WritePhy(pDevice, 0x18, 0x7007);
- LM_ReadPhy(pDevice, 0x18, &Value32);
- LM_WritePhy(pDevice, 0x18, Value32 | BIT_15 | BIT_4);
- }
-}
-
-STATIC LM_STATUS
-LM_PhyAdvertiseAll(LM_DEVICE_BLOCK *pDevice)
-{
- LM_UINT32 miireg;
-
- LM_ReadPhy(pDevice, PHY_AN_AD_REG, &miireg);
- pDevice->advertising = miireg;
- if ((miireg & PHY_AN_AD_ALL_SPEEDS) != PHY_AN_AD_ALL_SPEEDS)
- {
- return LM_STATUS_FAILURE;
- }
-
- LM_ReadPhy(pDevice, BCM540X_1000BASET_CTRL_REG, &miireg);
- pDevice->advertising1000 = miireg;
-
- if (!(pDevice->PhyFlags & PHY_NO_GIGABIT))
- {
- if ((miireg & BCM540X_AN_AD_ALL_1G_SPEEDS) !=
- BCM540X_AN_AD_ALL_1G_SPEEDS)
- {
- return LM_STATUS_FAILURE;
- }
- }else{
-
- if(miireg)
- {
- return LM_STATUS_FAILURE;
- }
- }
- return LM_STATUS_SUCCESS;
-}
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_VOID
-LM_ReadPhy(
-PLM_DEVICE_BLOCK pDevice,
-LM_UINT32 PhyReg,
-PLM_UINT32 pData32) {
- LM_UINT32 Value32;
- LM_UINT32 j;
-
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
- {
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode &
- ~MI_MODE_AUTO_POLLING_ENABLE);
- REG_RD_BACK(pDevice, MacCtrl.MiMode);
- MM_Wait(40);
- }
-
- Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) |
- ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << MI_COM_FIRST_PHY_REG_ADDR_BIT) |
- MI_COM_CMD_READ | MI_COM_START;
-
- REG_WR(pDevice, MacCtrl.MiCom, Value32);
-
- for(j = 0; j < 200; j++)
- {
- MM_Wait(1);
-
- Value32 = REG_RD(pDevice, MacCtrl.MiCom);
-
- if(!(Value32 & MI_COM_BUSY))
- {
- MM_Wait(5);
- Value32 = REG_RD(pDevice, MacCtrl.MiCom);
- Value32 &= MI_COM_PHY_DATA_MASK;
- break;
- }
- }
-
- if(Value32 & MI_COM_BUSY)
- {
- Value32 = 0;
- }
-
- *pData32 = Value32;
-
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
- {
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
- REG_RD_BACK(pDevice, MacCtrl.MiMode);
- MM_Wait(40);
- }
-} /* LM_ReadPhy */
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_VOID
-LM_WritePhy(
-PLM_DEVICE_BLOCK pDevice,
-LM_UINT32 PhyReg,
-LM_UINT32 Data32) {
- LM_UINT32 Value32;
- LM_UINT32 j;
-
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
- {
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode &
- ~MI_MODE_AUTO_POLLING_ENABLE);
- REG_RD_BACK(pDevice, MacCtrl.MiMode);
- MM_Wait(40);
- }
-
- Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) |
- ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) << MI_COM_FIRST_PHY_REG_ADDR_BIT) |
- (Data32 & MI_COM_PHY_DATA_MASK) | MI_COM_CMD_WRITE | MI_COM_START;
-
- REG_WR(pDevice, MacCtrl.MiCom, Value32);
-
- for(j = 0; j < 200; j++)
- {
- MM_Wait(1);
-
- Value32 = REG_RD(pDevice, MacCtrl.MiCom);
-
- if(!(Value32 & MI_COM_BUSY))
- {
- MM_Wait(5);
- break;
- }
- }
-
- if(pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING)
- {
- REG_WR(pDevice, MacCtrl.MiMode, pDevice->MiMode);
- REG_RD_BACK(pDevice, MacCtrl.MiMode);
- MM_Wait(40);
- }
-} /* LM_WritePhy */
-
-/* MII read/write functions to export to the robo support code */
-LM_UINT16
-robo_miird(void *h, int phyadd, int regoff)
-{
- PLM_DEVICE_BLOCK pdev = h;
- LM_UINT32 savephyaddr, val32;
-
- savephyaddr = pdev->PhyAddr;
- pdev->PhyAddr = phyadd;
-
- LM_ReadPhy(pdev, regoff, &val32);
-
- pdev->PhyAddr = savephyaddr;
-
- return ((LM_UINT16)(val32 & 0xffff));
-}
-
-void
-robo_miiwr(void *h, int phyadd, int regoff, LM_UINT16 value)
-{
- PLM_DEVICE_BLOCK pdev = h;
- LM_UINT32 val32, savephyaddr;
-
- savephyaddr = pdev->PhyAddr;
- pdev->PhyAddr = phyadd;
-
- val32 = (LM_UINT32)value;
- LM_WritePhy(pdev, regoff, val32);
-
- pdev->PhyAddr = savephyaddr;
-}
-
-STATIC void
-LM_GetPhyId(LM_DEVICE_BLOCK *pDevice)
-{
- LM_UINT32 Value32;
-
- LM_ReadPhy(pDevice, PHY_ID1_REG, &Value32);
- pDevice->PhyId = (Value32 & PHY_ID1_OUI_MASK) << 10;
-
- LM_ReadPhy(pDevice, PHY_ID2_REG, &Value32);
- pDevice->PhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) |
- (Value32 & PHY_ID2_MODEL_MASK) | (Value32 & PHY_ID2_REV_MASK);
-
-}
-
-LM_STATUS
-LM_EnableMacLoopBack(PLM_DEVICE_BLOCK pDevice)
-{
- pDevice->LoopBackMode = LM_MAC_LOOP_BACK_MODE;
- pDevice->MacMode &= ~MAC_MODE_PORT_MODE_MASK;
- pDevice->MacMode |= (MAC_MODE_PORT_INTERNAL_LOOPBACK |
- MAC_MODE_LINK_POLARITY | MAC_MODE_PORT_MODE_GMII);
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- MM_Wait(40);
- LM_SetupPhy(pDevice);
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-LM_DisableMacLoopBack(PLM_DEVICE_BLOCK pDevice)
-{
- pDevice->LoopBackMode = 0;
-
- pDevice->MacMode &= ~(MAC_MODE_PORT_INTERNAL_LOOPBACK |
- MAC_MODE_LINK_POLARITY | MAC_MODE_PORT_MODE_MASK);
- REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
- MM_Wait(40);
- if(pDevice->PhyFlags & PHY_IS_FIBER)
- LM_ResetPhy(pDevice);
-
- LM_SetupPhy(pDevice);
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-LM_EnablePhyLoopBack(PLM_DEVICE_BLOCK pDevice)
-{
- pDevice->LoopBackMode = LM_PHY_LOOP_BACK_MODE;
- LM_SetupPhy(pDevice);
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-LM_DisablePhyLoopBack(PLM_DEVICE_BLOCK pDevice)
-{
- pDevice->LoopBackMode = 0;
- LM_SetupPhy(pDevice);
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-LM_EnableExtLoopBack(PLM_DEVICE_BLOCK pDevice, LM_LINE_SPEED LineSpeed)
-{
- pDevice->LoopBackMode = LM_EXT_LOOP_BACK_MODE;
-
- pDevice->SavedDisableAutoNeg = pDevice->DisableAutoNeg;
- pDevice->SavedRequestedLineSpeed = pDevice->RequestedLineSpeed;
- pDevice->SavedRequestedDuplexMode = pDevice->RequestedDuplexMode;
-
- pDevice->DisableAutoNeg = TRUE;
- pDevice->RequestedLineSpeed = LineSpeed;
- pDevice->RequestedDuplexMode = LM_DUPLEX_MODE_FULL;
- LM_SetupPhy(pDevice);
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-LM_DisableExtLoopBack(PLM_DEVICE_BLOCK pDevice)
-{
- pDevice->LoopBackMode = 0;
-
- pDevice->DisableAutoNeg = pDevice->SavedDisableAutoNeg;
- pDevice->RequestedLineSpeed = pDevice->SavedRequestedLineSpeed;
- pDevice->RequestedDuplexMode = pDevice->SavedRequestedDuplexMode;
-
- LM_SetupPhy(pDevice);
- return LM_STATUS_SUCCESS;
-}
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS
-LM_SetPowerState(
-PLM_DEVICE_BLOCK pDevice,
-LM_POWER_STATE PowerLevel)
-{
-#ifdef BCM_WOL
- LM_UINT32 PmeSupport;
- PLM_DEVICE_BLOCK pDevice2 = 0;
- int j;
-#endif
- LM_UINT32 Value32;
- LM_UINT32 PmCtrl;
-
- /* make sureindirect accesses are enabled*/
- MM_WriteConfig32(pDevice, T3_PCI_MISC_HOST_CTRL_REG, pDevice->MiscHostCtrl);
-
- /* Clear the PME_ASSERT bit and the power state bits. Also enable */
- /* the PME bit. */
- MM_ReadConfig32(pDevice, T3_PCI_PM_STATUS_CTRL_REG, &PmCtrl);
-
- PmCtrl |= T3_PM_PME_ASSERTED;
- PmCtrl &= ~T3_PM_POWER_STATE_MASK;
-
- /* Set the appropriate power state. */
- if(PowerLevel == LM_POWER_STATE_D0)
- {
- /* Bring the card out of low power mode. */
- PmCtrl |= T3_PM_POWER_STATE_D0;
- MM_WriteConfig32(pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl);
-
- Value32 = REG_RD(pDevice, Grc.LocalCtrl);
-
- if(T3_ASIC_5752(pDevice->ChipRevId)){
- Value32 |= (GRC_MISC_LOCAL_CTRL_GPIO_OE3 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT3 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
- }
- else
- {
- Value32 &= ~(GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
- }
-
- RAW_REG_WR(pDevice, Grc.LocalCtrl, Value32);
-
- MM_Wait(40); /* Required delay is about 20us. */
-
- pDevice->PowerLevel = PowerLevel;
- return LM_STATUS_SUCCESS;
- }
-#ifdef BCM_WOL
- else if(PowerLevel == LM_POWER_STATE_D1)
- {
- PmCtrl |= T3_PM_POWER_STATE_D1;
- }
- else if(PowerLevel == LM_POWER_STATE_D2)
- {
- PmCtrl |= T3_PM_POWER_STATE_D2;
- }
- else if(PowerLevel == LM_POWER_STATE_D3)
- {
- PmCtrl |= T3_PM_POWER_STATE_D3;
- }
- else
- {
- return LM_STATUS_FAILURE;
- }
- PmCtrl |= T3_PM_PME_ENABLE;
-
- /* Mask out all interrupts so LM_SetupPhy won't be called while we are */
- /* setting new line speed. */
- Value32 = REG_RD(pDevice, PciCfg.MiscHostCtrl);
- REG_WR(pDevice, PciCfg.MiscHostCtrl, Value32 | MISC_HOST_CTRL_MASK_PCI_INT);
-
- if(!pDevice->RestoreOnWakeUp)
- {
- pDevice->RestoreOnWakeUp = TRUE;
- pDevice->WakeUpDisableAutoNeg = pDevice->DisableAutoNeg;
- pDevice->WakeUpRequestedLineSpeed = pDevice->RequestedLineSpeed;
- pDevice->WakeUpRequestedDuplexMode = pDevice->RequestedDuplexMode;
- }
-
- /* Force auto-negotiation to 10 line speed. */
- pDevice->DisableAutoNeg = FALSE;
-
- if (!(pDevice->TbiFlags & ENABLE_TBI_FLAG))
- {
- pDevice->RequestedLineSpeed = LM_LINE_SPEED_10MBPS;
- LM_SetupPhy(pDevice);
- }
-
- /* Put the driver in the initial state, and go through the power down */
- /* sequence. */
- LM_DoHalt(pDevice);
-
- if (!(pDevice->AsfFlags & ASF_ENABLED))
- {
- for(j = 0; j < 20000; j++)
- {
- MM_Wait(10);
-
- Value32 = MEM_RD_OFFSET(pDevice, T3_ASF_FW_STATUS_MAILBOX);
- if(Value32 == ~T3_MAGIC_NUM_FIRMWARE_INIT_DONE)
- {
- break;
- }
- }
- }
-
- MEM_WR_OFFSET(pDevice, DRV_WOL_MAILBOX, DRV_WOL_SIGNATURE |
- DRV_DOWN_STATE_SHUTDOWN | 0x2 | DRV_WOL_SET_MAGIC_PKT);
-
- MM_ReadConfig32(pDevice, T3_PCI_PM_CAP_REG, &PmeSupport);
-
- if (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE)
- {
-
- /* Enable WOL. */
- if (!(pDevice->TbiFlags & ENABLE_TBI_FLAG))
- {
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x5a);
- MM_Wait(40);
- }
-
- if (! T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId))
- {
- /* Let boot code deal with LED mode on shasta */
- REG_WR(pDevice, MacCtrl.LedCtrl, pDevice->LedCtrl);
- }
-
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- {
- Value32 = MAC_MODE_PORT_MODE_TBI;
- }
- else
- {
- Value32 = MAC_MODE_PORT_MODE_MII;
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700)
- {
- if(pDevice->LedCtrl == LED_CTRL_PHY_MODE_2 ||
- pDevice->WolSpeed == WOL_SPEED_10MB)
- {
- Value32 |= MAC_MODE_LINK_POLARITY;
- }
- }
- else
- {
- Value32 |= MAC_MODE_LINK_POLARITY;
- }
- }
- REG_WR(pDevice, MacCtrl.Mode, Value32);
- REG_RD_BACK(pDevice, MacCtrl.Mode);
- MM_Wait(40); MM_Wait(40); MM_Wait(40);
-
- /* Always enable magic packet wake-up if we have vaux. */
- if((PmeSupport & T3_PCI_PM_CAP_PME_D3COLD) &&
- (pDevice->WakeUpModeCap & LM_WAKE_UP_MODE_MAGIC_PACKET))
- {
- Value32 |= MAC_MODE_DETECT_MAGIC_PACKET_ENABLE;
- }
-
-#ifdef BCM_ASF
- if (pDevice->AsfFlags & ASF_ENABLED)
- {
- Value32 &= ~MAC_MODE_ACPI_POWER_ON_ENABLE;
- }
-#endif
- REG_WR(pDevice, MacCtrl.Mode, Value32);
-
- /* Enable the receiver. */
- REG_WR(pDevice, MacCtrl.RxMode, RX_MODE_ENABLE);
- }
- else if (!(pDevice->AsfFlags & ASF_ENABLED))
- {
- if (pDevice->TbiFlags & ENABLE_TBI_FLAG)
- {
- REG_WR(pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED |
- LED_CTRL_OVERRIDE_TRAFFIC_LED);
- }
- else
- {
- LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG,
- BCM540X_EXT_CTRL_FORCE_LED_OFF);
- LM_WritePhy(pDevice, 0x18, 0x01b2);
- if ((T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700) &&
- (T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5704) &&
- !T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId) )
- {
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_LOWER_POWER_MODE);
- }
- }
- }
-
- /* Disable tx/rx clocks, and select an alternate clock. */
- if (T3_ASIC_5714_FAMILY(pDevice->ChipRevId)){
- /* Do nothing */
- }
- else if ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700) ||
- ((T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701) &&
- (pDevice->WolSpeed == WOL_SPEED_10MB)))
- {
- Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
- T3_PCI_SELECT_ALTERNATE_CLOCK |
- T3_PCI_POWER_DOWN_PCI_PLL133;
-
- REG_WR(pDevice, PciCfg.ClockCtrl, pDevice->ClockCtrl | Value32);
- }
- /* ASF on 5750 will not run properly on slow core clock */
- else if( !(T3_ASIC_IS_575X_PLUS(pDevice->ChipRevId) &&
- (pDevice->AsfFlags & ASF_ENABLED) ))
- {
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
- T3_PCI_SELECT_ALTERNATE_CLOCK;
- }
- else if(T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId) )
- {
- Value32 = T3_PCI_625_CORE_CLOCK;
- }
- else
- {
- Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK;
- }
- RAW_REG_WR(pDevice, PciCfg.ClockCtrl, pDevice->ClockCtrl | Value32);
-
- MM_Wait(40);
-
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
- T3_PCI_SELECT_ALTERNATE_CLOCK | T3_PCI_44MHZ_CORE_CLOCK;
- }
- else if(T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId) )
- {
- Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK | T3_PCI_625_CORE_CLOCK;
- }
- else if(!T3_ASIC_5714_FAMILY(pDevice->ChipRevId))
- {
- Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK | T3_PCI_44MHZ_CORE_CLOCK;
- }
-
- RAW_REG_WR(pDevice, PciCfg.ClockCtrl, pDevice->ClockCtrl | Value32);
-
- if (!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- MM_Wait(40);
-
- if(T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- Value32 = T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
- T3_PCI_44MHZ_CORE_CLOCK;
- }
- else
- {
- Value32 = T3_PCI_44MHZ_CORE_CLOCK;
- }
-
- RAW_REG_WR(pDevice, PciCfg.ClockCtrl, pDevice->ClockCtrl | Value32);
- }
- }
-
- MM_Wait(40);
-
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5704)
- {
- pDevice2 = MM_FindPeerDev(pDevice);
- }
- if (!(pDevice->Flags & EEPROM_WP_FLAG))
- {
- LM_SwitchVaux(pDevice, pDevice2);
- }
-
- LM_WritePostResetSignatures(pDevice, LM_SHUTDOWN_RESET);
-
- if((T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5750_AX) ||
- (T3_CHIP_REV(pDevice->ChipRevId) == T3_CHIP_REV_5750_BX)) {
-
- Value32= REG_RD_OFFSET(pDevice, 0x7d00);
- REG_WR_OFFSET(pDevice, 0x7d00,Value32 & ~(BIT_16 | BIT_4 | BIT_2 | BIT_1 | BIT_0));
-
- if(!(pDevice->AsfFlags & ASF_ENABLED))
- LM_HaltCpu(pDevice, T3_RX_CPU_ID);
-
- }
-
- /* Put the the hardware in low power mode. */
- if (!(pDevice->Flags & DISABLE_D3HOT_FLAG))
- {
- MM_WriteConfig32(pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl);
- MM_Wait(200); /* Wait 200us for state transition */
- }
-
- pDevice->PowerLevel = PowerLevel;
-
-#else
- LM_WritePostResetSignatures(pDevice, LM_SHUTDOWN_RESET);
-#endif /* BCM_WOL */
-
- return LM_STATUS_SUCCESS;
-} /* LM_SetPowerState */
-
-
-LM_VOID
-LM_SwitchVaux(PLM_DEVICE_BLOCK pDevice, PLM_DEVICE_BLOCK pDevice2)
-{
- if(T3_ASIC_5714_FAMILY(pDevice->ChipRevId))
- return;
-
- pDevice->GrcLocalCtrl &= ~(GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
-
- /* Switch adapter to auxilliary power if WOL enabled */
- if ((pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE) ||
- (pDevice->AsfFlags & ASF_ENABLED) ||
- (pDevice2 && ((pDevice2->WakeUpModeCap != LM_WAKE_UP_MODE_NONE) ||
- (pDevice2->AsfFlags & ASF_ENABLED))))
- {
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
- T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5701)
- {
- /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */
- RAW_REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
- MM_Wait(40);
- }
- else
- {
- if (pDevice2 && pDevice2->InitDone)
- {
- return;
- }
-
- /* On NICs GPIOs are used for vaux.
- The transition of GPIO0 from 0-1 causes vaux
- to power up. Transition of GPIO1 from 1-0 turns vaux off.
- GPIO2 transition from 1-0 enables a non-glitch vaux
- transition from one state to another.
- On certain designs we should not output GPIO2.
- */
- if(pDevice->Flags & GPIO2_DONOT_OUTPUT)
- {
- /* GPIO0 = 0, GPIO1 = 1. */
- RAW_REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
-
- MM_Wait(40);
-
- /* GPIO0 = 1, GPIO1 = 1. */
- RAW_REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
-
- MM_Wait(40);
- }
- else
- {
-
- /* GPIO0 = 0, GPIO1 = 1, GPIO2 = 1. */
- RAW_REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
-
- MM_Wait(40);
-
- /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 1. */
- RAW_REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
- MM_Wait(40);
-
- /* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */
- RAW_REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
- MM_Wait(40);
- } /* GPIO2 OK */
- } /* Not 5700||5701 */
- } /* WOL disabled */
- else
- {
- if ((T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700) &&
- (T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701))
- {
- if (pDevice2 && pDevice2->InitDone)
- {
- return;
- }
-
- /* GPIO1 = 1 */
- RAW_REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
- MM_Wait(40);
-
- /* GPIO1 = 0 */
- RAW_REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1);
- MM_Wait(40);
-
- /* GPIO1 = 1 */
- RAW_REG_WR(pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
- GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
- GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
- MM_Wait(40);
- }
- }
-}
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-static LM_UINT32
-GetPhyAdFlowCntrlSettings(
- PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 Value32;
-
- Value32 = 0;
-
- /* Auto negotiation flow control only when autonegotiation is enabled. */
- if(pDevice->DisableAutoNeg == FALSE ||
- pDevice->RequestedLineSpeed == LM_LINE_SPEED_AUTO)
- {
- if (T3_ASIC_5714_FAMILY(pDevice->ChipRevId) &&
- (pDevice->PhyFlags & PHY_IS_FIBER)) {
-
- /* Please refer to Table 28B-3 of the 802.3ab-1999 spec. */
- if((pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE) ||
- ((pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) &&
- (pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)))
- {
- Value32 |=PHY_AN_AD_1000XPAUSE;
- }
- else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)
- {
- Value32 |= PHY_AN_AD_1000XPSE_ASYM;
- }
- else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)
- {
- Value32 |= (PHY_AN_AD_1000XPSE_ASYM | PHY_AN_AD_1000XPAUSE);
- }
-
- }else{
-
- /* Please refer to Table 28B-3 of the 802.3ab-1999 spec. */
- if((pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE) ||
- ((pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) &&
- (pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)))
- {
- Value32 |= PHY_AN_AD_PAUSE_CAPABLE;
- }
- else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)
- {
- Value32 |= PHY_AN_AD_ASYM_PAUSE;
- }
- else if(pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)
- {
- Value32 |= PHY_AN_AD_PAUSE_CAPABLE | PHY_AN_AD_ASYM_PAUSE;
- }
- }
- }
-
- return Value32;
-}
-
-
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/* LM_STATUS_FAILURE */
-/* LM_STATUS_SUCCESS */
-/* */
-/******************************************************************************/
-static LM_STATUS
-LM_ForceAutoNeg(PLM_DEVICE_BLOCK pDevice)
-{
- LM_LINE_SPEED LineSpeed;
- LM_DUPLEX_MODE DuplexMode;
- LM_UINT32 NewPhyCtrl;
- LM_UINT32 Value32, PhyReg18;
- LM_UINT32 Cnt;
-
- /* Get the interface type, line speed, and duplex mode. */
- LineSpeed = pDevice->RequestedLineSpeed;
- DuplexMode = pDevice->RequestedDuplexMode;
-
- /* Exit ext. loop back, in case it was in ext. loopback mode */
- /* Set Extended packet length bit on chips that support jumbo frames */
- if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
- {
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x4c20);
-
- LM_ReadPhy(pDevice, BCM540X_EXT_CTRL_REG, &Value32);
- Value32 |= 1; /* set tx elastic fifo */
- LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, Value32);
-
- }
- else
- {
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0007);
- LM_ReadPhy(pDevice, BCM5401_AUX_CTRL, &PhyReg18);
- PhyReg18 &= ~0x8000; /* clear external loop back */
-
- if (pDevice->Flags & JUMBO_CAPABLE_FLAG)
- {
- PhyReg18 |= 0x4000; /* set extended packet length */
- LM_ReadPhy(pDevice, BCM540X_EXT_CTRL_REG, &Value32);
- Value32 |= 1; /* set tx elastic fifo */
- LM_WritePhy(pDevice, BCM540X_EXT_CTRL_REG, Value32);
- }
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, PhyReg18);
- }
-
-#ifdef BCM_WOL
- if (pDevice->RestoreOnWakeUp)
- {
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0);
- pDevice->advertising1000 = 0;
- Value32 = PHY_AN_AD_10BASET_FULL | PHY_AN_AD_10BASET_HALF;
- if (pDevice->WolSpeed == WOL_SPEED_100MB)
- {
- Value32 |= PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
- }
- Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
- }
- /* Setup the auto-negotiation advertisement register. */
- else if(LineSpeed == LM_LINE_SPEED_UNKNOWN)
-#else
- /* Setup the auto-negotiation advertisement register. */
- if(LineSpeed == LM_LINE_SPEED_UNKNOWN)
-#endif
- {
- /* Setup the 10/100 Mbps auto-negotiation advertisement register. */
- Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD | PHY_AN_AD_ALL_SPEEDS;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
-
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
-
- /* Advertise 1000Mbps */
- if (!(pDevice->PhyFlags & PHY_NO_GIGABIT))
- {
- Value32 = BCM540X_AN_AD_ALL_1G_SPEEDS;
-
-#ifdef INCLUDE_5701_AX_FIX
- /* slave mode. This will force the PHY to operate in */
- /* master mode. */
- if(pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0)
- {
- Value32 |= BCM540X_CONFIG_AS_MASTER |
- BCM540X_ENABLE_CONFIG_AS_MASTER;
- }
-#endif
-
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
- pDevice->advertising1000 = Value32;
- }
- else
- {
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0);
- pDevice->advertising1000 = 0;
- }
- }
- else
- {
- if ((pDevice->PhyFlags & PHY_NO_GIGABIT) &&
- (LineSpeed == LM_LINE_SPEED_1000MBPS))
- {
- LineSpeed = LM_LINE_SPEED_100MBPS;
- }
- if(LineSpeed == LM_LINE_SPEED_1000MBPS)
- {
- Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
-
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
-
- if(DuplexMode != LM_DUPLEX_MODE_FULL)
- {
- Value32 = BCM540X_AN_AD_1000BASET_HALF;
- }
- else
- {
- Value32 = BCM540X_AN_AD_1000BASET_FULL;
- }
-
-#ifdef INCLUDE_5701_AX_FIX
- if ((pDevice->LoopBackMode == LM_EXT_LOOP_BACK_MODE) ||
- (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
- pDevice->ChipRevId == T3_CHIP_ID_5701_B0))
-#else
- if (pDevice->LoopBackMode == LM_EXT_LOOP_BACK_MODE)
-#endif
- {
- Value32 |= BCM540X_CONFIG_AS_MASTER |
- BCM540X_ENABLE_CONFIG_AS_MASTER;
- }
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
- pDevice->advertising1000 = Value32;
- if (pDevice->LoopBackMode == LM_EXT_LOOP_BACK_MODE)
- {
- if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
- {
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x8c20);
- }
- else
- {
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, 0x0007);
- LM_ReadPhy(pDevice, BCM5401_AUX_CTRL, &PhyReg18);
- PhyReg18 |= 0x8000; /* set loop back */
- LM_WritePhy(pDevice, BCM5401_AUX_CTRL, PhyReg18);
- }
- }
- }
- else if(LineSpeed == LM_LINE_SPEED_100MBPS)
- {
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0);
- pDevice->advertising1000 = 0;
-
- if(DuplexMode != LM_DUPLEX_MODE_FULL)
- {
- Value32 = PHY_AN_AD_100BASETX_HALF;
- }
- else
- {
- Value32 = PHY_AN_AD_100BASETX_FULL;
- }
-
- Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
-
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
- }
- else if(LineSpeed == LM_LINE_SPEED_10MBPS)
- {
- LM_WritePhy(pDevice, BCM540X_1000BASET_CTRL_REG, 0);
- pDevice->advertising1000 = 0;
-
- if(DuplexMode != LM_DUPLEX_MODE_FULL)
- {
- Value32 = PHY_AN_AD_10BASET_HALF;
- }
- else
- {
- Value32 = PHY_AN_AD_10BASET_FULL;
- }
-
- Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
- Value32 |= GetPhyAdFlowCntrlSettings(pDevice);
-
- LM_WritePhy(pDevice, PHY_AN_AD_REG, Value32);
- pDevice->advertising = Value32;
- }
- }
-
- /* Force line speed if auto-negotiation is disabled. */
- if(pDevice->DisableAutoNeg && LineSpeed != LM_LINE_SPEED_UNKNOWN)
- {
- /* This code path is executed only when there is link. */
- pDevice->LineSpeed = LineSpeed;
- pDevice->DuplexMode = DuplexMode;
-
- /* Force line seepd. */
- NewPhyCtrl = 0;
- switch(LineSpeed)
- {
- case LM_LINE_SPEED_10MBPS:
- NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_10MBPS;
- break;
- case LM_LINE_SPEED_100MBPS:
- NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_100MBPS;
- break;
- case LM_LINE_SPEED_1000MBPS:
- NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS;
- break;
- default:
- NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS;
- break;
- }
-
- if(DuplexMode == LM_DUPLEX_MODE_FULL)
- {
- NewPhyCtrl |= PHY_CTRL_FULL_DUPLEX_MODE;
- }
-
- /* Don't do anything if the PHY_CTRL is already what we wanted. */
- LM_ReadPhy(pDevice, PHY_CTRL_REG, &Value32);
- if(Value32 != NewPhyCtrl)
- {
- /* Temporary bring the link down before forcing line speed. */
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_LOOPBACK_MODE);
-
- /* Wait for link to go down. */
- for(Cnt = 0; Cnt < 1500; Cnt++)
- {
- MM_Wait(10);
-
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
- LM_ReadPhy(pDevice, PHY_STATUS_REG, &Value32);
-
- if(!(Value32 & PHY_STATUS_LINK_PASS))
- {
- MM_Wait(40);
- break;
- }
- }
-
- LM_WritePhy(pDevice, PHY_CTRL_REG, NewPhyCtrl);
- MM_Wait(40);
- }
- }
- else
- {
- LM_WritePhy(pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE |
- PHY_CTRL_RESTART_AUTO_NEG);
- }
-
- return LM_STATUS_SUCCESS;
-} /* LM_ForceAutoNegBcm540xPhy */
-
-/******************************************************************************/
-/* Description: */
-/* */
-/* Return: */
-/******************************************************************************/
-LM_STATUS LM_LoadFirmware(PLM_DEVICE_BLOCK pDevice,
- PT3_FWIMG_INFO pFwImg,
- LM_UINT32 LoadCpu,
- LM_UINT32 StartCpu)
-{
- LM_UINT32 i;
- LM_UINT32 address;
- LM_VOID (*Wr_fn)(PLM_DEVICE_BLOCK pDevice,LM_UINT32 Register,LM_UINT32 Value32);
- LM_UINT32 (*Rd_fn)(PLM_DEVICE_BLOCK pDevice,LM_UINT32 Register);
- LM_UINT32 len;
- LM_UINT32 base_addr;
-
- /* BCM4785: Avoid all use of firmware. */
- if (pDevice->Flags & SB_CORE_FLAG)
- return LM_STATUS_FAILURE;
-
-#ifdef INCLUDE_TCP_SEG_SUPPORT
- if (T3_ASIC_REV(pDevice->ChipRevId) == T3_ASIC_REV_5705)
- {
- Wr_fn = LM_MemWrInd;
- Rd_fn = LM_MemRdInd;
- len = LM_GetStkOffLdFirmwareSize(pDevice);
- base_addr = T3_NIC_BCM5705_MBUF_POOL_ADDR;
- }
- else
-#endif
- {
- Wr_fn = LM_RegWrInd;
- Rd_fn = LM_RegRdInd;
- len = T3_RX_CPU_SPAD_SIZE;
- base_addr = T3_RX_CPU_SPAD_ADDR;
- }
-
- if (LoadCpu & T3_RX_CPU_ID)
- {
- if (LM_HaltCpu(pDevice,T3_RX_CPU_ID) != LM_STATUS_SUCCESS)
- {
- return LM_STATUS_FAILURE;
- }
-
- /* First of all clear scrach pad memory */
- for (i = 0; i < len; i+=4)
- {
- Wr_fn(pDevice,base_addr+i,0);
- }
-
- /* Copy code first */
- address = base_addr + (pFwImg->Text.Offset & 0xffff);
- for (i = 0; i <= pFwImg->Text.Length; i+=4)
- {
- Wr_fn(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->Text.Buffer)[i/4]);
- }
-
- address = base_addr + (pFwImg->ROnlyData.Offset & 0xffff);
- for (i = 0; i <= pFwImg->ROnlyData.Length; i+=4)
- {
- Wr_fn(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->ROnlyData.Buffer)[i/4]);
- }
-
- address = base_addr + (pFwImg->Data.Offset & 0xffff);
- for (i= 0; i <= pFwImg->Data.Length; i+=4)
- {
- Wr_fn(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->Data.Buffer)[i/4]);
- }
- }
-
- if ((LoadCpu & T3_TX_CPU_ID) &&
- (T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5705))
- {
- if (LM_HaltCpu(pDevice,T3_TX_CPU_ID) != LM_STATUS_SUCCESS)
- {
- return LM_STATUS_FAILURE;
- }
-
- /* First of all clear scrach pad memory */
- for (i = 0; i < T3_TX_CPU_SPAD_SIZE; i+=4)
- {
- Wr_fn(pDevice,T3_TX_CPU_SPAD_ADDR+i,0);
- }
-
- /* Copy code first */
- address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff);
- for (i= 0; i <= pFwImg->Text.Length; i+=4)
- {
- Wr_fn(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->Text.Buffer)[i/4]);
- }
-
- address = T3_TX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff);
- for (i= 0; i <= pFwImg->ROnlyData.Length; i+=4)
- {
- Wr_fn(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->ROnlyData.Buffer)[i/4]);
- }
-
- address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff);
- for (i= 0; i <= pFwImg->Data.Length; i+=4)
- {
- Wr_fn(pDevice,address+i,
- ((LM_UINT32 *)pFwImg->Data.Buffer)[i/4]);
- }
- }
-
- if (StartCpu & T3_RX_CPU_ID)
- {
- /* Start Rx CPU */
- REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,rxCpu.reg.PC,pFwImg->StartAddress);
- for (i = 0 ; i < 5; i++)
- {
- if (pFwImg->StartAddress == REG_RD(pDevice,rxCpu.reg.PC))
- break;
-
- REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT);
- REG_WR(pDevice,rxCpu.reg.PC,pFwImg->StartAddress);
- REG_RD_BACK(pDevice,rxCpu.reg.PC);
- MM_Wait(1000);
- }
-
- REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,rxCpu.reg.mode, 0);
- }
-
- if ((StartCpu & T3_TX_CPU_ID) &&
- (T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5705))
- {
- /* Start Tx CPU */
- REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,txCpu.reg.PC,pFwImg->StartAddress);
- for (i = 0 ; i < 5; i++)
- {
- if (pFwImg->StartAddress == REG_RD(pDevice,txCpu.reg.PC))
- break;
-
- REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,txCpu.reg.mode,CPU_MODE_HALT);
- REG_WR(pDevice,txCpu.reg.PC,pFwImg->StartAddress);
- REG_RD_BACK(pDevice,txCpu.reg.PC);
- MM_Wait(1000);
- }
-
- REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,txCpu.reg.mode, 0);
- }
-
- return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS LM_HaltCpu(PLM_DEVICE_BLOCK pDevice,LM_UINT32 cpu_number)
-{
- LM_UINT32 i;
- LM_STATUS status;
-
- status = LM_STATUS_SUCCESS;
-
- if (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId) &&
- !(cpu_number & T3_RX_CPU_ID))
- {
- return status;
- }
-
- if ((T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700) &&
- (T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701))
- {
- status = LM_NVRAM_AcquireLock(pDevice);
- }
-
- if (cpu_number & T3_RX_CPU_ID)
- {
- for (i = 0 ; i < 10000; i++)
- {
- REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT);
-
- if (REG_RD(pDevice,rxCpu.reg.mode) & CPU_MODE_HALT)
- break;
- }
-
- REG_WR(pDevice,rxCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,rxCpu.reg.mode,CPU_MODE_HALT);
- REG_RD_BACK(pDevice,rxCpu.reg.mode);
- MM_Wait(10);
-
- if (i == 10000)
- status = LM_STATUS_FAILURE;
- }
-
- /*
- * BCM4785: There is only an Rx CPU for the 5750 derivative in
- * the 4785. Don't go any further in this code in order to
- * avoid access to the NVRAM arbitration register.
- */
- if (pDevice->Flags & SB_CORE_FLAG)
- return status;
-
- if ((pDevice->Flags & T3_HAS_TWO_CPUS) &&
- (cpu_number & T3_TX_CPU_ID))
- {
- for (i = 0 ; i < 10000; i++)
- {
- REG_WR(pDevice,txCpu.reg.state, 0xffffffff);
- REG_WR(pDevice,txCpu.reg.mode,CPU_MODE_HALT);
-
- if (REG_RD(pDevice,txCpu.reg.mode) & CPU_MODE_HALT)
- break;
- }
-
- if (i == 10000)
- status = LM_STATUS_FAILURE;
- }
-
- if ((T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700) &&
- (T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701))
- {
- if (status != LM_STATUS_SUCCESS)
- {
- /*
- * Some part of this operation failed.
- * Just undo our own actions.
- */
- LM_NVRAM_ReleaseLock(pDevice);
- }
- else if (!(pDevice->Flags & T3_HAS_TWO_CPUS) ||
- cpu_number == (T3_TX_CPU_ID | T3_RX_CPU_ID))
- {
- /*
- * Release our NVRAM arbitration grant along
- * with the firmware's arbitration request bit.
- */
- REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_CLR1 | SW_ARB_REQ_CLR0);
- REG_RD_BACK(pDevice, Nvram.SwArb);
- }
- else
- {
- LM_NVRAM_ReleaseLock(pDevice);
-
- if (LM_NVRAM_AcquireLock(pDevice) == LM_STATUS_SUCCESS)
- {
- /* All is well. Release the arbitration and continue. */
- LM_NVRAM_ReleaseLock(pDevice);
- }
- else
- {
- /*
- * We've timed out while attempting to get the
- * NVRAM arbitration. Assume the cause is that
- * the NVRAM has requested arbitration after we
- * acquired arbitration the first time, but before
- * the CPU was actually halted.
- */
-
- /*
- * Release our NVRAM arbitration grant along
- * with the firmware's arbitration request bit.
- */
- REG_WR(pDevice, Nvram.SwArb, SW_ARB_REQ_CLR1 | SW_ARB_REQ_CLR0);
- REG_RD_BACK(pDevice, Nvram.SwArb);
- }
- }
- }
-
- return status;
-}
-
-
-LM_STATUS
-LM_BlinkLED(PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDurationSec)
-{
- int j;
- int ret = LM_STATUS_SUCCESS;
-
- if(BlinkDurationSec == 0)
- {
- BlinkDurationSec = 1;
- }
- if(BlinkDurationSec > 120)
- {
- BlinkDurationSec = 120;
- }
-
- for(j = 0; j < BlinkDurationSec * 2; j++)
- {
- if(j % 2)
- {
- // Turn on the LEDs.
- REG_WR(pDevice, MacCtrl.LedCtrl,
- LED_CTRL_OVERRIDE_LINK_LED |
- LED_CTRL_1000MBPS_LED_ON |
- LED_CTRL_100MBPS_LED_ON |
- LED_CTRL_10MBPS_LED_ON |
- LED_CTRL_OVERRIDE_TRAFFIC_LED |
- LED_CTRL_BLINK_TRAFFIC_LED |
- LED_CTRL_TRAFFIC_LED);
- }
- else
- {
- // Turn off the LEDs.
- REG_WR(pDevice, MacCtrl.LedCtrl,
- LED_CTRL_OVERRIDE_LINK_LED |
- LED_CTRL_OVERRIDE_TRAFFIC_LED);
- }
- if (MM_Sleep(pDevice, 500) != LM_STATUS_SUCCESS)/* 0.5 second */
- {
- ret = LM_STATUS_FAILURE;
- break;
- }
- }
- REG_WR(pDevice, MacCtrl.LedCtrl, pDevice->LedCtrl);
- return ret;
-}
-
-LM_STATUS
-LM_SwitchClocks(PLM_DEVICE_BLOCK pDevice)
-{
- LM_UINT32 ClockCtrl;
-
- if(T3_ASIC_5714_FAMILY(pDevice->ChipRevId))
- return LM_STATUS_SUCCESS;
-
- ClockCtrl = REG_RD(pDevice, PciCfg.ClockCtrl);
- pDevice->ClockCtrl = ClockCtrl & (T3_PCI_FORCE_CLKRUN |
- T3_PCI_CLKRUN_OUTPUT_EN | 0x1f);
- if (T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- if (ClockCtrl & T3_PCI_625_CORE_CLOCK)
- {
- /* clear ALT clock first */
- RAW_REG_WR(pDevice, PciCfg.ClockCtrl, pDevice->ClockCtrl |
- T3_PCI_625_CORE_CLOCK);
- MM_Wait(40); /* required delay is 27usec */
- }
- }
- else
- {
- if (ClockCtrl & T3_PCI_44MHZ_CORE_CLOCK)
- {
- RAW_REG_WR(pDevice, PciCfg.ClockCtrl, pDevice->ClockCtrl |
- T3_PCI_44MHZ_CORE_CLOCK | T3_PCI_SELECT_ALTERNATE_CLOCK);
- MM_Wait(40); /* required delay is 27usec */
- RAW_REG_WR(pDevice, PciCfg.ClockCtrl, pDevice->ClockCtrl |
- T3_PCI_SELECT_ALTERNATE_CLOCK);
- MM_Wait(40); /* required delay is 27usec */
- }
- }
-
- RAW_REG_WR(pDevice, PciCfg.ClockCtrl, pDevice->ClockCtrl);
- MM_Wait(40); /* required delay is 27usec */
- return LM_STATUS_SUCCESS;
-}
-
-int t3_do_dma(PLM_DEVICE_BLOCK pDevice,
- LM_PHYSICAL_ADDRESS host_addr_phy, int length,
- int dma_read)
-{
- T3_DMA_DESC dma_desc;
- int i;
- LM_UINT32 dma_desc_addr;
- LM_UINT32 value32;
-
- REG_WR(pDevice, BufMgr.Mode, 0);
- REG_WR(pDevice, Ftq.Reset, 0);
-
- dma_desc.host_addr.High = host_addr_phy.High;
- dma_desc.host_addr.Low = host_addr_phy.Low;
- dma_desc.nic_mbuf = 0x2100;
- dma_desc.len = length;
- dma_desc.flags = 0x00000005; /* Generate Rx-CPU event */
-
- if (dma_read)
- {
- dma_desc.cqid_sqid = (T3_QID_RX_BD_COMP << 8) |
- T3_QID_DMA_HIGH_PRI_READ;
- REG_WR(pDevice, DmaRead.Mode, DMA_READ_MODE_ENABLE);
- }
- else
- {
- dma_desc.cqid_sqid = (T3_QID_RX_DATA_COMP << 8) |
- T3_QID_DMA_HIGH_PRI_WRITE;
- REG_WR(pDevice, DmaWrite.Mode, DMA_WRITE_MODE_ENABLE);
- }
-
- dma_desc_addr = T3_NIC_DMA_DESC_POOL_ADDR;
-
- /* Writing this DMA descriptor to DMA memory */
- for (i = 0; i < sizeof(T3_DMA_DESC); i += 4)
- {
- value32 = *((PLM_UINT32) (((PLM_UINT8) &dma_desc) + i));
- MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_ADDR_REG, dma_desc_addr+i);
- MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_DATA_REG,
- MM_SWAP_LE32(value32));
- }
- MM_WriteConfig32(pDevice, T3_PCI_MEM_WIN_ADDR_REG, 0);
-
- if (dma_read)
- REG_WR(pDevice, Ftq.DmaHighReadFtqFifoEnqueueDequeue, dma_desc_addr);
- else
- REG_WR(pDevice, Ftq.DmaHighWriteFtqFifoEnqueueDequeue, dma_desc_addr);
-
- for (i = 0; i < 40; i++)
- {
- if (dma_read)
- value32 = REG_RD(pDevice, Ftq.RcvBdCompFtqFifoEnqueueDequeue);
- else
- value32 = REG_RD(pDevice, Ftq.RcvDataCompFtqFifoEnqueueDequeue);
-
- if ((value32 & 0xffff) == dma_desc_addr)
- break;
-
- MM_Wait(10);
- }
-
- return LM_STATUS_SUCCESS;
-}
-
-STATIC LM_STATUS
-LM_DmaTest(PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt,
- LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize)
-{
- int j;
- LM_UINT32 *ptr;
- int dma_success = 0;
- LM_STATUS ret = LM_STATUS_FAILURE;
-
- if(T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
- T3_ASIC_REV(pDevice->ChipRevId) != T3_ASIC_REV_5701)
- {
- return LM_STATUS_SUCCESS;
- }
- while (!dma_success)
- {
- /* Fill data with incremental patterns */
- ptr = (LM_UINT32 *)pBufferVirt;
- for (j = 0; j < BufferSize/4; j++)
- *ptr++ = j;
-
- if (t3_do_dma(pDevice,BufferPhy,BufferSize, 1) == LM_STATUS_FAILURE)
- {
- goto LM_DmaTestDone;
- }
-
- MM_Wait(40);
- ptr = (LM_UINT32 *)pBufferVirt;
- /* Fill data with zero */
- for (j = 0; j < BufferSize/4; j++)
- *ptr++ = 0;
-
- if (t3_do_dma(pDevice,BufferPhy,BufferSize, 0) == LM_STATUS_FAILURE)
- {
- goto LM_DmaTestDone;
- }
-
- MM_Wait(40);
- /* Check for data */
- ptr = (LM_UINT32 *)pBufferVirt;
- for (j = 0; j < BufferSize/4; j++)
- {
- if (*ptr++ != j)
- {
- if ((pDevice->DmaReadWriteCtrl & DMA_CTRL_WRITE_BOUNDARY_MASK)
- != DMA_CTRL_WRITE_BOUNDARY_16)
- {
- pDevice->DmaReadWriteCtrl = (pDevice->DmaReadWriteCtrl &
- ~DMA_CTRL_WRITE_BOUNDARY_MASK) |
- DMA_CTRL_WRITE_BOUNDARY_16;
- REG_WR(pDevice, PciCfg.DmaReadWriteCtrl,
- pDevice->DmaReadWriteCtrl);
- break;
- }
- else
- {
- goto LM_DmaTestDone;
- }
- }
- }
- if (j == (BufferSize/4))
- dma_success = 1;
- }
- ret = LM_STATUS_SUCCESS;
-LM_DmaTestDone:
- memset(pBufferVirt, 0, BufferSize);
- return ret;
-}
-
-void
-LM_Add32To64Counter(LM_UINT32 Counter32, T3_64BIT_REGISTER *Counter64)
-{
- Counter64->Low += Counter32;
- if (Counter64->Low < Counter32)
- {
- Counter64->High++;
- }
-}
-
-LM_STATUS
-LM_GetStats(PLM_DEVICE_BLOCK pDevice)
-{
- PT3_STATS_BLOCK pStats = (PT3_STATS_BLOCK) pDevice->pStatsBlkVirt;
-
- if(!T3_ASIC_IS_5705_BEYOND(pDevice->ChipRevId))
- {
- return LM_STATUS_FAILURE;
- }
-
- if (pStats == 0)
- {
- return LM_STATUS_FAILURE;
- }
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.ifHCOutOctets),
- &pStats->ifHCOutOctets);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.etherStatsCollisions),
- &pStats->etherStatsCollisions);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.outXonSent),
- &pStats->outXonSent);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.outXoffSent),
- &pStats->outXoffSent);
- LM_Add32To64Counter(REG_RD(pDevice,
- MacCtrl.dot3StatsInternalMacTransmitErrors),
- &pStats->dot3StatsInternalMacTransmitErrors);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.dot3StatsSingleCollisionFrames),
- &pStats->dot3StatsSingleCollisionFrames);
- LM_Add32To64Counter(REG_RD(pDevice,
- MacCtrl.dot3StatsMultipleCollisionFrames),
- &pStats->dot3StatsMultipleCollisionFrames);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.dot3StatsDeferredTransmissions),
- &pStats->dot3StatsDeferredTransmissions);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.dot3StatsExcessiveCollisions),
- &pStats->dot3StatsExcessiveCollisions);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.dot3StatsLateCollisions),
- &pStats->dot3StatsLateCollisions);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.ifHCOutUcastPkts),
- &pStats->ifHCOutUcastPkts);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.ifHCOutMulticastPkts),
- &pStats->ifHCOutMulticastPkts);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.ifHCOutBroadcastPkts),
- &pStats->ifHCOutBroadcastPkts);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.ifHCInOctets),
- &pStats->ifHCInOctets);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.etherStatsFragments),
- &pStats->etherStatsFragments);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.ifHCInUcastPkts),
- &pStats->ifHCInUcastPkts);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.ifHCInMulticastPkts),
- &pStats->ifHCInMulticastPkts);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.ifHCInBroadcastPkts),
- &pStats->ifHCInBroadcastPkts);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.dot3StatsFCSErrors),
- &pStats->dot3StatsFCSErrors);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.dot3StatsAlignmentErrors),
- &pStats->dot3StatsAlignmentErrors);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.xonPauseFramesReceived),
- &pStats->xonPauseFramesReceived);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.xoffPauseFramesReceived),
- &pStats->xoffPauseFramesReceived);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.macControlFramesReceived),
- &pStats->macControlFramesReceived);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.xoffStateEntered),
- &pStats->xoffStateEntered);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.dot3StatsFramesTooLong),
- &pStats->dot3StatsFramesTooLong);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.etherStatsJabbers),
- &pStats->etherStatsJabbers);
- LM_Add32To64Counter(REG_RD(pDevice, MacCtrl.etherStatsUndersizePkts),
- &pStats->etherStatsUndersizePkts);
-
- return LM_STATUS_SUCCESS;
-}
+++ /dev/null
-/******************************************************************************/
-/* */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 - 2005 Broadcom */
-/* Corporation. */
-/* All rights reserved. */
-/* */
-/* This program is free software; you can redistribute it and/or modify */
-/* it under the terms of the GNU General Public License as published by */
-/* the Free Software Foundation, located in the file LICENSE. */
-/* */
-/* History: */
-/* */
-/******************************************************************************/
-
-#ifndef TIGON3_H
-#define TIGON3_H
-
-#include "lm.h"
-#ifdef INCLUDE_TBI_SUPPORT
-#include "autoneg.h"
-#endif
-
-
-
-/******************************************************************************/
-/* Constants. */
-/******************************************************************************/
-
-#ifndef TIGON3_DEBUG
-#define TIGON3_DEBUG 0
-#endif /* TIGON3_DEBUG */
-
-/* Number of entries in the Jumbo Receive RCB. This value must 256 or 0. */
-/* Currently, Jumbo Receive RCB is disabled. */
-#ifndef T3_JUMBO_RCV_RCB_ENTRY_COUNT
-#define T3_JUMBO_RCV_RCB_ENTRY_COUNT 0
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-#ifndef T3_JUMBO_RCV_ENTRY_COUNT
-#define T3_JUMBO_RCV_ENTRY_COUNT 0
-#endif /* T3_JUMBO_RCV_ENTRY_COUNT */
-
-#ifndef T3_JUMBO_RCB_ENTRY_COUNT
-#define T3_JUMBO_RCB_ENTRY_COUNT 0
-#endif /* T3_JUMBO_RCB_ENTRY_COUNT */
-
-/* Maxim number of packet descriptors used for sending packets. */
-#define MAX_TX_PACKET_DESC_COUNT T3_SEND_RCB_ENTRY_COUNT
-#define DEFAULT_TX_PACKET_DESC_COUNT 120
-
-/* Maximum number of packet descriptors used for receiving packets. */
-#if T3_JUMBO_RCB_ENTRY_COUNT
-#define MAX_RX_PACKET_DESC_COUNT \
- (T3_STD_RCV_RCB_ENTRY_COUNT + T3_JUMBO_RCV_RCB_ENTRY_COUNT)
-#else
-#define MAX_RX_PACKET_DESC_COUNT T3_STD_RCV_RCB_ENTRY_COUNT
-#endif
-#define DEFAULT_RX_PACKET_DESC_COUNT 200
-
-/* Threshhold for double copying small tx packets. 0 will disable double */
-/* copying of small Tx packets. */
-#define DEFAULT_TX_COPY_BUFFER_SIZE 0
-#define MIN_TX_COPY_BUFFER_SIZE 64
-#define MAX_TX_COPY_BUFFER_SIZE 512
-
-/* Cache line. */
-#define COMMON_CACHE_LINE_SIZE 0x20
-#define COMMON_CACHE_LINE_MASK (COMMON_CACHE_LINE_SIZE-1)
-
-/* Maximum number of fragment we can handle. */
-#ifndef MAX_FRAGMENT_COUNT
-#define MAX_FRAGMENT_COUNT 32
-#endif
-
-/* B0 bug. */
-#define BCM5700_BX_MIN_FRAG_SIZE 10
-#define BCM5700_BX_MIN_FRAG_BUF_SIZE 16 /* nice aligned size. */
-#define BCM5700_BX_MIN_FRAG_BUF_SIZE_MASK (BCM5700_BX_MIN_FRAG_BUF_SIZE-1)
-#define BCM5700_BX_TX_COPY_BUF_SIZE (BCM5700_BX_MIN_FRAG_BUF_SIZE * \
- MAX_FRAGMENT_COUNT)
-
-/* MAGIC number. */
-//#define T3_MAGIC_NUM 'KevT'
-#define T3_FIRMWARE_MAILBOX 0x0b50
-#define T3_MAGIC_NUM_FIRMWARE_INIT_DONE 0x4B657654
-#define T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE 0x4861764b
-
-#define T3_NIC_DATA_SIG_ADDR 0x0b54
-#define T3_NIC_DATA_SIG 0x4b657654
-
-#define T3_NIC_DATA_NIC_CFG_ADDR 0x0b58
-#define T3_NIC_CFG_LED_MAC_MODE BIT_NONE
-#define T3_NIC_CFG_LED_PHY_MODE_1 BIT_2
-#define T3_NIC_CFG_LED_PHY_MODE_2 BIT_3
-#define T3_NIC_CFG_LED_MODE_MASK (BIT_2 | BIT_3)
-#define T3_NIC_CFG_PHY_TYPE_UNKNOWN BIT_NONE
-#define T3_NIC_CFG_PHY_TYPE_COPPER BIT_4
-#define T3_NIC_CFG_PHY_TYPE_FIBER BIT_5
-#define T3_NIC_CFG_PHY_TYPE_MASK (BIT_4 | BIT_5)
-#define T3_NIC_CFG_ENABLE_WOL BIT_6
-#define T3_NIC_CFG_ENABLE_ASF BIT_7
-#define T3_NIC_EEPROM_WP BIT_8
-#define T3_NIC_WOL_LIMIT_10 BIT_10
-#define T3_NIC_MINI_PCI BIT_12
-#define T3_NIC_FIBER_WOL_CAPABLE BIT_14
-#define T3_NIC_BOTH_PORT_100MB_WOL_CAPABLE BIT_15
-#define T3_NIC_GPIO2_NOT_AVAILABLE BIT_20
-
-#define T3_NIC_DATA_VER 0x0b5c
-#define T3_NIC_DATA_VER_SHIFT 16
-
-#define T3_NIC_DATA_PHY_ID_ADDR 0x0b74
-#define T3_NIC_PHY_ID1_MASK 0xffff0000
-#define T3_NIC_PHY_ID2_MASK 0x0000ffff
-
-#define T3_CMD_MAILBOX 0x0b78
-#define T3_CMD_NICDRV_ALIVE 0x01
-#define T3_CMD_NICDRV_PAUSE_FW 0x02
-#define T3_CMD_NICDRV_IPV4ADDR_CHANGE 0x03
-#define T3_CMD_NICDRV_IPV6ADDR_CHANGE 0x04
-#define T3_CMD_5703A0_FIX_DMAFW_DMAR 0x05
-#define T3_CMD_5703A0_FIX_DMAFW_DMAW 0x06
-
-#define T3_CMD_NICDRV_ALIVE2 0x0d
-
-#define T3_CMD_LENGTH_MAILBOX 0x0b7c
-#define T3_CMD_DATA_MAILBOX 0x0b80
-
-#define T3_ASF_FW_STATUS_MAILBOX 0x0c00
-
-#define T3_DRV_STATE_MAILBOX 0x0c04
-#define T3_DRV_STATE_START 0x01
-#define T3_DRV_STATE_START_DONE 0x80000001
-#define T3_DRV_STATE_UNLOAD 0x02
-#define T3_DRV_STATE_UNLOAD_DONE 0x80000002
-#define T3_DRV_STATE_WOL 0x03
-#define T3_DRV_STATE_SUSPEND 0x04
-
-#define T3_FW_RESET_TYPE_MAILBOX 0x0c08
-
-#define T3_MAC_ADDR_HIGH_MAILBOX 0x0c14
-#define T3_MAC_ADDR_LOW_MAILBOX 0x0c18
-
-#define DRV_WOL_MAILBOX 0xd30
-#define DRV_WOL_SIGNATURE 0x474c0000
-
-#define DRV_DOWN_STATE_SHUTDOWN 0x1
-
-#define DRV_WOL_SET_MAGIC_PKT BIT_2
-
-#define T3_NIC_DATA_NIC_CFG_ADDR2 0x0d38 /* bit 2-3 are same as in */
- /* 0xb58 */
-#define T3_SHASTA_EXT_LED_MODE_MASK (BIT_15 | BIT_16)
-#define T3_SHASTA_EXT_LED_LEGACY_MODE BIT_NONE
-#define T3_SHASTA_EXT_LED_SHARED_TRAFFIC_LINK_MODE BIT_15
-#define T3_SHASTA_EXT_LED_MAC_MODE BIT_16
-#define T3_SHASTA_EXT_LED_WIRELESS_COMBO_MODE (BIT_15 | BIT_16)
-#define T3_NIC_CFG_CAPACITIVE_COUPLING BIT_17
-#define T3_NIC_CFG_PRESERVE_PREEMPHASIS BIT_18
-
-/******************************************************************************/
-/* Hardware constants. */
-/******************************************************************************/
-
-/* Number of entries in the send ring: must be 512. */
-#define T3_SEND_RCB_ENTRY_COUNT 512
-#define T3_SEND_RCB_ENTRY_COUNT_MASK (T3_SEND_RCB_ENTRY_COUNT-1)
-
-/* Number of send RCBs. May be 1-16 but for now, only support one. */
-#define T3_MAX_SEND_RCB_COUNT 16
-
-/* Number of entries in the Standard Receive RCB. Must be 512 entries. */
-#define T3_STD_RCV_RCB_ENTRY_COUNT 512
-#define T3_STD_RCV_RCB_ENTRY_COUNT_MASK (T3_STD_RCV_RCB_ENTRY_COUNT-1)
-#define DEFAULT_STD_RCV_DESC_COUNT 200 /* Must be < 512. */
-#define MAX_STD_RCV_BUFFER_SIZE 0x600
-
-/* Number of entries in the Mini Receive RCB. This value can either be */
-/* 0, 1024. Currently Mini Receive RCB is disabled. */
-#ifndef T3_MINI_RCV_RCB_ENTRY_COUNT
-#define T3_MINI_RCV_RCB_ENTRY_COUNT 0
-#endif /* T3_MINI_RCV_RCB_ENTRY_COUNT */
-#define T3_MINI_RCV_RCB_ENTRY_COUNT_MASK (T3_MINI_RCV_RCB_ENTRY_COUNT-1)
-#define MAX_MINI_RCV_BUFFER_SIZE 512
-#define DEFAULT_MINI_RCV_BUFFER_SIZE 64
-#define DEFAULT_MINI_RCV_DESC_COUNT 100 /* Must be < 1024. */
-
-#define T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK (T3_JUMBO_RCV_RCB_ENTRY_COUNT-1)
-
-#define MAX_JUMBO_RCV_BUFFER_SIZE (10 * 1024) /* > 1514 */
-#define DEFAULT_JUMBO_RCV_BUFFER_SIZE (4 * 1024) /* > 1514 */
-#define DEFAULT_JUMBO_RCV_DESC_COUNT 128 /* Must be < 256. */
-
-#define MAX_JUMBO_TX_BUFFER_SIZE (8 * 1024) /* > 1514 */
-#define DEFAULT_JUMBO_TX_BUFFER_SIZE (4 * 1024) /* > 1514 */
-
-/* Number of receive return RCBs. Maybe 1-16 but for now, only support one. */
-#define T3_MAX_RCV_RETURN_RCB_COUNT 16
-
-/* Number of entries in a Receive Return ring. This value is either 1024 */
-/* or 2048. */
-#ifndef T3_RCV_RETURN_RCB_ENTRY_COUNT
-#define T3_RCV_RETURN_RCB_ENTRY_COUNT 1024
-#endif /* T3_RCV_RETURN_RCB_ENTRY_COUNT */
-#define T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK (T3_RCV_RETURN_RCB_ENTRY_COUNT-1)
-
-
-/* Default coalescing parameters. */
-#ifdef BCM_NAPI_RXPOLL
-#define DEFAULT_RX_COALESCING_TICKS 18
-#define DEFAULT_RX_MAX_COALESCED_FRAMES 6
-#else
-#define DEFAULT_RX_COALESCING_TICKS 60
-#define DEFAULT_RX_MAX_COALESCED_FRAMES 15
-#endif
-
-#define DEFAULT_TX_COALESCING_TICKS 200
-#define DEFAULT_TX_MAX_COALESCED_FRAMES 35
-
-#define MAX_RX_COALESCING_TICKS 500
-#define MAX_TX_COALESCING_TICKS 500
-#define MAX_RX_MAX_COALESCED_FRAMES 100
-#define MAX_TX_MAX_COALESCED_FRAMES 100
-
-#define ADAPTIVE_LO_RX_MAX_COALESCED_FRAMES 5
-#define ADAPTIVE_HI_RX_MAX_COALESCED_FRAMES 48
-#define ADAPTIVE_LO_RX_COALESCING_TICKS 25
-#define ADAPTIVE_HI_RX_COALESCING_TICKS 120
-#define ADAPTIVE_LO_PKT_THRESH 52000
-#define ADAPTIVE_HI_PKT_THRESH 112000
-#define ADAPTIVE_LO_TX_MAX_COALESCED_FRAMES 20
-#define ADAPTIVE_HI_TX_MAX_COALESCED_FRAMES 75
-
-#ifdef BCM_NAPI_RXPOLL
-#define DEFAULT_RX_COALESCING_TICKS_DURING_INT 18
-#define DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT 6
-#else
-#define DEFAULT_RX_COALESCING_TICKS_DURING_INT 25
-#define DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT 2
-#endif
-#define DEFAULT_TX_COALESCING_TICKS_DURING_INT 25
-#define ADAPTIVE_LO_RX_MAX_COALESCED_FRAMES_DURING_INT 1
-#define ADAPTIVE_HI_RX_MAX_COALESCED_FRAMES_DURING_INT 5
-#define DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT 5
-
-#define BAD_DEFAULT_VALUE 0xffffffff
-
-#define DEFAULT_STATS_COALESCING_TICKS 1000000
-#define MIN_STATS_COALESCING_TICKS 100
-#define MAX_STATS_COALESCING_TICKS 3600000000U
-
-
-/* Receive BD Replenish thresholds. */
-#define DEFAULT_RCV_STD_BD_REPLENISH_THRESHOLD 4
-#define DEFAULT_RCV_JUMBO_BD_REPLENISH_THRESHOLD 4
-
-/* Maximum physical fragment size. */
-#define MAX_FRAGMENT_SIZE (64 * 1024)
-
-
-/* Standard view. */
-#define T3_STD_VIEW_SIZE (64 * 1024)
-#define T3_FLAT_VIEW_SIZE (32 * 1024 * 1024)
-
-
-/* Buffer descriptor base address on the NIC's memory. */
-
-#define T3_NIC_SND_BUFFER_DESC_ADDR 0x4000
-#define T3_NIC_STD_RCV_BUFFER_DESC_ADDR 0x6000
-#define T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR 0x7000
-
-#define T3_NIC_STD_RCV_BUFFER_DESC_ADDR_EXT_MEM 0xc000
-#define T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR_EXT_MEM 0xd000
-#define T3_NIC_MINI_RCV_BUFFER_DESC_ADDR_EXT_MEM 0xe000
-
-#define T3_NIC_SND_BUFFER_DESC_SIZE (T3_SEND_RCB_ENTRY_COUNT * \
- sizeof(T3_SND_BD) / 4)
-
-#define T3_NIC_STD_RCV_BUFFER_DESC_SIZE (T3_STD_RCV_RCB_ENTRY_COUNT * \
- sizeof(T3_RCV_BD) / 4)
-
-#define T3_NIC_JUMBO_RCV_BUFFER_DESC_SIZE (T3_JUMBO_RCV_RCB_ENTRY_COUNT * \
- sizeof(T3_EXT_RCV_BD) / 4)
-
-
-/* MBUF pool. */
-#define T3_NIC_MBUF_POOL_ADDR 0x8000
-#define T3_NIC_MBUF_POOL_SIZE32 0x8000
-#define T3_NIC_MBUF_POOL_SIZE96 0x18000
-#define T3_NIC_MBUF_POOL_SIZE64 0x10000
-
-#define T3_NIC_MBUF_POOL_ADDR_EXT_MEM 0x20000
-
-#define T3_NIC_BCM5705_MBUF_POOL_ADDR 0x10000
-#define T3_NIC_BCM5705_MBUF_POOL_SIZE 0xe000
-
-/* DMA descriptor pool */
-#define T3_NIC_DMA_DESC_POOL_ADDR 0x2000
-#define T3_NIC_DMA_DESC_POOL_SIZE 0x2000 /* 8KB. */
-
-#define T3_DEF_DMA_MBUF_LOW_WMARK 0x50
-#define T3_DEF_RX_MAC_MBUF_LOW_WMARK 0x20
-#define T3_DEF_MBUF_HIGH_WMARK 0x60
-
-#define T3_DEF_DMA_MBUF_LOW_WMARK_5705 0x0
-#define T3_DEF_RX_MAC_MBUF_LOW_WMARK_5705 0x10
-#define T3_DEF_MBUF_HIGH_WMARK_5705 0x60
-
-#define T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO 304
-#define T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO 152
-#define T3_DEF_MBUF_HIGH_WMARK_JUMBO 380
-
-#define T3_DEF_DMA_DESC_LOW_WMARK 5
-#define T3_DEF_DMA_DESC_HIGH_WMARK 10
-
-/* Maximum size of giant TCP packet can be sent */
-#define T3_TCP_SEG_MAX_OFFLOAD_SIZE 64*1000
-#define T3_TCP_SEG_MIN_NUM_SEG 20
-
-#define T3_RX_CPU_ID 0x1
-#define T3_TX_CPU_ID 0x2
-#define T3_RX_CPU_SPAD_ADDR 0x30000
-#define T3_RX_CPU_SPAD_SIZE 0x4000
-#define T3_TX_CPU_SPAD_ADDR 0x34000
-#define T3_TX_CPU_SPAD_SIZE 0x4000
-
-typedef struct T3_DIR_ENTRY
-{
- PLM_UINT8 Buffer;
- LM_UINT32 Offset;
- LM_UINT32 Length;
-} T3_DIR_ENTRY,*PT3_DIR_ENTRY;
-
-typedef struct T3_FWIMG_INFO
-{
- LM_UINT32 StartAddress;
- T3_DIR_ENTRY Text;
- T3_DIR_ENTRY ROnlyData;
- T3_DIR_ENTRY Data;
- T3_DIR_ENTRY Sbss;
- T3_DIR_ENTRY Bss;
-} T3_FWIMG_INFO, *PT3_FWIMG_INFO;
-
-
-
-/******************************************************************************/
-/* Tigon3 PCI Registers. */
-/******************************************************************************/
-/* MSI ENABLE bit is located at this offset */
-#define T3_PCI_MSI_ENABLE 0x58
-
-#define T3_PCI_ID_BCM5700 0x164414e4
-#define T3_PCI_ID_BCM5701 0x164514e4
-#define T3_PCI_ID_BCM5702 0x164614e4
-#define T3_PCI_ID_BCM5702x 0x16A614e4
-#define T3_PCI_ID_BCM5703 0x164714e4
-#define T3_PCI_ID_BCM5703x 0x16A714e4
-#define T3_PCI_ID_BCM5702FE 0x164D14e4
-#define T3_PCI_ID_BCM5704 0x164814e4
-#define T3_PCI_ID_BCM5705 0x165314e4
-#define T3_PCI_ID_BCM5705M 0x165D14e4
-#define T3_PCI_ID_BCM5705F 0x166E14e4
-#define T3_PCI_ID_BCM5901 0x170D14e4
-#define T3_PCI_ID_BCM5901A2 0x170E14e4
-#define T3_PCI_ID_BCM5751F 0x167E14e4
-
-#define T3_PCI_ID_BCM471F 0x471f14e4
-
-#define T3_PCI_ID_BCM5753 0x16f714e4
-#define T3_PCI_ID_BCM5753M 0x16fd14e4
-#define T3_PCI_ID_BCM5753F 0x16fe14e4
-#define T3_PCI_ID_BCM5781 0x16dd14e4
-
-#define T3_PCI_ID_BCM5903M 0x16ff14e4
-
-#define T3_PCI_VENDOR_ID(x) ((x) & 0xffff)
-#define T3_PCI_DEVICE_ID(x) ((x) >> 16)
-
-#define T3_PCI_MISC_HOST_CTRL_REG 0x68
-
-/* The most significant 16bit of register 0x68. */
-/* ChipId:4, ChipRev:4, MetalRev:8 */
-#define T3_CHIP_ID_5700_A0 0x7000
-#define T3_CHIP_ID_5700_A1 0x7001
-#define T3_CHIP_ID_5700_B0 0x7100
-#define T3_CHIP_ID_5700_B1 0x7101
-#define T3_CHIP_ID_5700_C0 0x7200
-
-#define T3_CHIP_ID_5701_A0 0x0000
-#define T3_CHIP_ID_5701_B0 0x0100
-#define T3_CHIP_ID_5701_B2 0x0102
-#define T3_CHIP_ID_5701_B5 0x0105
-
-#define T3_CHIP_ID_5703_A0 0x1000
-#define T3_CHIP_ID_5703_A1 0x1001
-#define T3_CHIP_ID_5703_A2 0x1002
-#define T3_CHIP_ID_5703_A3 0x1003
-
-#define T3_CHIP_ID_5704_A0 0x2000
-#define T3_CHIP_ID_5704_A1 0x2001
-#define T3_CHIP_ID_5704_A2 0x2002
-
-#define T3_CHIP_ID_5705_A0 0x3000
-#define T3_CHIP_ID_5705_A1 0x3001
-#define T3_CHIP_ID_5705_A2 0x3002
-#define T3_CHIP_ID_5705_A3 0x3003
-
-#define T3_CHIP_ID_5750_A0 0x4000
-#define T3_CHIP_ID_5750_A1 0x4001
-#define T3_CHIP_ID_5750_A3 0x4003
-#define T3_CHIP_ID_5750_B0 0x4010
-#define T3_CHIP_ID_5750_C0 0x4200
-
-#define T3_CHIP_ID_5714_A0 0x5000
-#define T3_CHIP_ID_5752_A0 0x6000
-#define T3_CHIP_ID_5714 0x8000
-
-
-/* Chip Id. */
-#define T3_ASIC_REV(_ChipRevId) ((_ChipRevId) >> 12)
-#define T3_ASIC_REV_5700 0x07
-#define T3_ASIC_REV_5701 0x00
-#define T3_ASIC_REV_5703 0x01
-#define T3_ASIC_REV_5704 0x02
-#define T3_ASIC_REV_5705 0x03
-#define T3_ASIC_REV_5750 0x04
-#define T3_ASIC_REV_5714_A0 0x05 /*5714,5715*/
-#define T3_ASIC_REV_5752 0x06
-#define T3_ASIC_REV_5780 0x08 /* 5780 previously htle */
-#define T3_ASIC_REV_5714 0x09 /*5714,5715*/
-
-#define T3_ASIC_IS_5705_BEYOND(_ChipRevId) \
- ((T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5705) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5750) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5714_A0) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5780) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5714) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5752))
-
-#define T3_ASIC_IS_575X_PLUS(_ChipRevId) \
- ((T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5750) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5714_A0) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5780) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5714) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5752))
-
-#define T3_ASIC_5714_FAMILY(_ChipRevId) \
- ((T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5714_A0) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5780) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5714))
-
-#define T3_ASIC_IS_JUMBO_CAPABLE(_ChipRevId) \
- ((T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5700) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5701) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5703) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5714_A0) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5780) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5714) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5704))
-
-#define T3_ASIC_5752(_ChipRevId) \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5752)
-
-#define T3_ASIC_5705_OR_5750(_ChipRevId) \
- ((T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5705) || \
- (T3_ASIC_REV(_ChipRevId) == T3_ASIC_REV_5750))
-
-/* Chip id and revision. */
-#define T3_CHIP_REV(_ChipRevId) ((_ChipRevId) >> 8)
-#define T3_CHIP_REV_5700_AX 0x70
-#define T3_CHIP_REV_5700_BX 0x71
-#define T3_CHIP_REV_5700_CX 0x72
-#define T3_CHIP_REV_5701_AX 0x00
-#define T3_CHIP_REV_5703_AX 0x10
-#define T3_CHIP_REV_5704_AX 0x20
-#define T3_CHIP_REV_5704_BX 0x21
-
-#define T3_CHIP_REV_5750_AX 0x40
-#define T3_CHIP_REV_5750_BX 0x41
-
-/* Metal revision. */
-#define T3_METAL_REV(_ChipRevId) ((_ChipRevId) & 0xff)
-#define T3_METAL_REV_A0 0x00
-#define T3_METAL_REV_A1 0x01
-#define T3_METAL_REV_B0 0x00
-#define T3_METAL_REV_B1 0x01
-#define T3_METAL_REV_B2 0x02
-
-#define T3_PCI_REG_CLOCK_CTRL 0x74
-
-#define T3_PCI_DISABLE_RX_CLOCK BIT_10
-#define T3_PCI_DISABLE_TX_CLOCK BIT_11
-#define T3_PCI_SELECT_ALTERNATE_CLOCK BIT_12
-#define T3_PCI_POWER_DOWN_PCI_PLL133 BIT_15
-#define T3_PCI_44MHZ_CORE_CLOCK BIT_18
-#define T3_PCI_625_CORE_CLOCK BIT_20
-#define T3_PCI_FORCE_CLKRUN BIT_21
-#define T3_PCI_CLKRUN_OUTPUT_EN BIT_22
-
-
-#define T3_PCI_REG_ADDR_REG 0x78
-#define T3_PCI_REG_DATA_REG 0x80
-
-#define T3_PCI_MEM_WIN_ADDR_REG 0x7c
-#define T3_PCI_MEM_WIN_DATA_REG 0x84
-
-#define T3_PCI_PM_CAP_REG 0x48
-
-#define T3_PCI_PM_CAP_PME_D3COLD BIT_31
-#define T3_PCI_PM_CAP_PME_D3HOT BIT_30
-
-#define T3_PCI_PM_STATUS_CTRL_REG 0x4c
-
-#define T3_PM_POWER_STATE_MASK (BIT_0 | BIT_1)
-#define T3_PM_POWER_STATE_D0 BIT_NONE
-#define T3_PM_POWER_STATE_D1 BIT_0
-#define T3_PM_POWER_STATE_D2 BIT_1
-#define T3_PM_POWER_STATE_D3 (BIT_0 | BIT_1)
-
-#define T3_PM_PME_ENABLE BIT_8
-#define T3_PM_PME_ASSERTED BIT_15
-
-#define T3_MSI_CAPABILITY_ID_REG 0x58
-#define T3_MSI_NEXT_CAPABILITY_PTR 0x59
-
-/* PCI state register. */
-#define T3_PCI_STATE_REG 0x70
-
-#define T3_PCI_STATE_FORCE_RESET BIT_0
-#define T3_PCI_STATE_INT_NOT_ACTIVE BIT_1
-#define T3_PCI_STATE_CONVENTIONAL_PCI_MODE BIT_2
-#define T3_PCI_STATE_BUS_SPEED_HIGH BIT_3
-#define T3_PCI_STATE_32BIT_PCI_BUS BIT_4
-
-
-/* Broadcom subsystem/subvendor IDs. */
-#define T3_SVID_BROADCOM 0x14e4
-
-#define T3_SSID_BROADCOM_BCM95700A6 0x1644
-#define T3_SSID_BROADCOM_BCM95701A5 0x0001
-#define T3_SSID_BROADCOM_BCM95700T6 0x0002 /* BCM8002 */
-#define T3_SSID_BROADCOM_BCM95700A9 0x0003 /* Agilent */
-#define T3_SSID_BROADCOM_BCM95701T1 0x0005
-#define T3_SSID_BROADCOM_BCM95701T8 0x0006
-#define T3_SSID_BROADCOM_BCM95701A7 0x0007 /* Agilent */
-#define T3_SSID_BROADCOM_BCM95701A10 0x0008
-#define T3_SSID_BROADCOM_BCM95701A12 0x8008
-#define T3_SSID_BROADCOM_BCM95703Ax1 0x0009
-#define T3_SSID_BROADCOM_BCM95703Ax2 0x8009
-
-/* 3COM subsystem/subvendor IDs. */
-#define T3_SVID_3COM 0x10b7
-
-#define T3_SSID_3COM_3C996T 0x1000
-#define T3_SSID_3COM_3C996BT 0x1006
-#define T3_SSID_3COM_3C996CT 0x1002
-#define T3_SSID_3COM_3C997T 0x1003
-#define T3_SSID_3COM_3C1000T 0x1007
-#define T3_SSID_3COM_3C940BR01 0x1008
-
-/* Fiber boards. */
-#define T3_SSID_3COM_3C996SX 0x1004
-#define T3_SSID_3COM_3C997SX 0x1005
-
-
-/* Dell subsystem/subvendor IDs. */
-
-#define T3_SVID_DELL 0x1028
-
-#define T3_SSID_DELL_VIPER 0x00d1
-#define T3_SSID_DELL_JAGUAR 0x0106
-#define T3_SSID_DELL_MERLOT 0x0109
-#define T3_SSID_DELL_SLIM_MERLOT 0x010a
-
-/* Compaq subsystem/subvendor IDs */
-
-#define T3_SVID_COMPAQ 0x0e11
-
-#define T3_SSID_COMPAQ_BANSHEE 0x007c
-#define T3_SSID_COMPAQ_BANSHEE_2 0x009a
-#define T3_SSID_COMPAQ_CHANGELING 0x007d
-#define T3_SSID_COMPAQ_NC7780 0x0085
-#define T3_SSID_COMPAQ_NC7780_2 0x0099
-
-#define T3_PCIE_CAPABILITY_ID_REG 0xD0
-#define T3_PCIE_CAPABILITY_ID 0x10
-
-#define T3_PCIE_CAPABILITY_REG 0xD2
-
-/******************************************************************************/
-/* MII registers. */
-/******************************************************************************/
-
-/* Control register. */
-#define PHY_CTRL_REG 0x00
-
-#define PHY_CTRL_SPEED_MASK (BIT_6 | BIT_13)
-#define PHY_CTRL_SPEED_SELECT_10MBPS BIT_NONE
-#define PHY_CTRL_SPEED_SELECT_100MBPS BIT_13
-#define PHY_CTRL_SPEED_SELECT_1000MBPS BIT_6
-#define PHY_CTRL_COLLISION_TEST_ENABLE BIT_7
-#define PHY_CTRL_FULL_DUPLEX_MODE BIT_8
-#define PHY_CTRL_RESTART_AUTO_NEG BIT_9
-#define PHY_CTRL_ISOLATE_PHY BIT_10
-#define PHY_CTRL_LOWER_POWER_MODE BIT_11
-#define PHY_CTRL_AUTO_NEG_ENABLE BIT_12
-#define PHY_CTRL_LOOPBACK_MODE BIT_14
-#define PHY_CTRL_PHY_RESET BIT_15
-
-
-/* Status register. */
-#define PHY_STATUS_REG 0x01
-
-#define PHY_STATUS_LINK_PASS BIT_2
-#define PHY_STATUS_AUTO_NEG_COMPLETE BIT_5
-
-
-/* Phy Id registers. */
-#define PHY_ID1_REG 0x02
-#define PHY_ID1_OUI_MASK 0xffff
-
-#define PHY_ID2_REG 0x03
-#define PHY_ID2_REV_MASK 0x000f
-#define PHY_ID2_MODEL_MASK 0x03f0
-#define PHY_ID2_OUI_MASK 0xfc00
-
-
-/* Auto-negotiation advertisement register. */
-#define PHY_AN_AD_REG 0x04
-
-#define PHY_AN_AD_ASYM_PAUSE BIT_11
-#define PHY_AN_AD_PAUSE_CAPABLE BIT_10
-#define PHY_AN_AD_10BASET_HALF BIT_5
-#define PHY_AN_AD_10BASET_FULL BIT_6
-#define PHY_AN_AD_100BASETX_HALF BIT_7
-#define PHY_AN_AD_100BASETX_FULL BIT_8
-#define PHY_AN_AD_PROTOCOL_802_3_CSMA_CD 0x01
-
-/* Defines for 5714 family fiber on the 546x phy*/
-
-#define PHY_AN_AD_1000XFULL 0x20
-#define PHY_AN_AD_1000XHALF 0x40
-#define PHY_AN_AD_1000XPAUSE 0x80
-#define PHY_AN_AD_1000XPSE_ASYM 0x100
-#define PHY_AN_AD_1000XREM_FAULT_OFFLINE 0x2000
-#define PHY_AN_AD_1000XREM_FAULT_AN_ERROR 0x3000
-
-#define PHY_AN_AD_ALL_SPEEDS (PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL |\
- PHY_AN_AD_100BASETX_HALF | PHY_AN_AD_100BASETX_FULL)
-
-/* Auto-negotiation Link Partner Ability register. */
-#define PHY_LINK_PARTNER_ABILITY_REG 0x05
-
-#define PHY_LINK_PARTNER_ASYM_PAUSE BIT_11
-#define PHY_LINK_PARTNER_PAUSE_CAPABLE BIT_10
-
-
-/* Auto-negotiation expansion register. */
-#define PHY_AN_EXPANSION_REG 0x06
-
-
-
-/******************************************************************************/
-/* BCM5400 and BCM5401 phy info. */
-/******************************************************************************/
-
-#define PHY_DEVICE_ID 1
-
-/* OUI: bit 31-10; Model#: bit 9-4; Rev# bit 3-0. */
-#define PHY_UNKNOWN_PHY 0x00000000
-#define PHY_BCM5400_PHY_ID 0x60008040
-#define PHY_BCM5401_PHY_ID 0x60008050
-#define PHY_BCM5411_PHY_ID 0x60008070
-#define PHY_BCM5461_PHY_ID 0x600080c0
-#define PHY_BCM5701_PHY_ID 0x60008110
-#define PHY_BCM5703_PHY_ID 0x60008160
-#define PHY_BCM5704_PHY_ID 0x60008190
-#define PHY_BCM5705_PHY_ID 0x600081a0
-#define PHY_BCM5750_PHY_ID 0x60008180
-#define PHY_BCM8002_PHY_ID 0x60010140
-#define PHY_BCM5714_PHY_ID 0x60008340
-#define PHY_BCM5780_PHY_ID 0x60008350
-#define PHY_BCM5752_PHY_ID 0x60008100
-
-#define PHY_BCM5401_B0_REV 0x1
-#define PHY_BCM5401_B2_REV 0x3
-#define PHY_BCM5401_C0_REV 0x6
-
-#define PHY_ID_OUI_MASK 0xfffffc00
-#define PHY_ID_MODEL_MASK 0x000003f0
-#define PHY_ID_REV_MASK 0x0000000f
-#define PHY_ID_MASK (PHY_ID_OUI_MASK | \
- PHY_ID_MODEL_MASK)
-
-#define UNKNOWN_PHY_ID(x) ((((x) & PHY_ID_MASK) != PHY_BCM5400_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5401_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5411_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5701_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5703_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5704_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5705_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5750_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM8002_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5714_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5780_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5752_PHY_ID) && \
- (((x) & PHY_ID_MASK) != PHY_BCM5461_PHY_ID))
-
-/* 1000Base-T control register. */
-#define BCM540X_1000BASET_CTRL_REG 0x09
-
-#define BCM540X_AN_AD_1000BASET_HALF BIT_8
-#define BCM540X_AN_AD_1000BASET_FULL BIT_9
-#define BCM540X_CONFIG_AS_MASTER BIT_11
-#define BCM540X_ENABLE_CONFIG_AS_MASTER BIT_12
-
-#define BCM540X_AN_AD_ALL_1G_SPEEDS (BCM540X_AN_AD_1000BASET_HALF | \
- BCM540X_AN_AD_1000BASET_FULL)
-
-/* Extended control register. */
-#define BCM540X_EXT_CTRL_REG 0x10
-
-#define BCM540X_EXT_CTRL_LINK3_LED_MODE BIT_1
-#define BCM540X_EXT_CTRL_FORCE_LED_OFF BIT_3
-#define BCM540X_EXT_CTRL_TBI BIT_15
-
-/* PHY extended status register. */
-#define BCM540X_EXT_STATUS_REG 0x11
-
-#define BCM540X_EXT_STATUS_LINK_PASS BIT_8
-
-
-/* DSP Coefficient Read/Write Port. */
-#define BCM540X_DSP_RW_PORT 0x15
-
-
-/* DSP Coeficient Address Register. */
-#define BCM540X_DSP_ADDRESS_REG 0x17
-
-#define BCM540X_DSP_TAP_NUMBER_MASK 0x00
-#define BCM540X_DSP_AGC_A 0x00
-#define BCM540X_DSP_AGC_B 0x01
-#define BCM540X_DSP_MSE_PAIR_STATUS 0x02
-#define BCM540X_DSP_SOFT_DECISION 0x03
-#define BCM540X_DSP_PHASE_REG 0x04
-#define BCM540X_DSP_SKEW 0x05
-#define BCM540X_DSP_POWER_SAVER_UPPER_BOUND 0x06
-#define BCM540X_DSP_POWER_SAVER_LOWER_BOUND 0x07
-#define BCM540X_DSP_LAST_ECHO 0x08
-#define BCM540X_DSP_FREQUENCY 0x09
-#define BCM540X_DSP_PLL_BANDWIDTH 0x0a
-#define BCM540X_DSP_PLL_PHASE_OFFSET 0x0b
-
-#define BCM540X_DSP_FILTER_DCOFFSET (BIT_10 | BIT_11)
-#define BCM540X_DSP_FILTER_FEXT3 (BIT_8 | BIT_9 | BIT_11)
-#define BCM540X_DSP_FILTER_FEXT2 (BIT_9 | BIT_11)
-#define BCM540X_DSP_FILTER_FEXT1 (BIT_8 | BIT_11)
-#define BCM540X_DSP_FILTER_FEXT0 BIT_11
-#define BCM540X_DSP_FILTER_NEXT3 (BIT_8 | BIT_9 | BIT_10)
-#define BCM540X_DSP_FILTER_NEXT2 (BIT_9 | BIT_10)
-#define BCM540X_DSP_FILTER_NEXT1 (BIT_8 | BIT_10)
-#define BCM540X_DSP_FILTER_NEXT0 BIT_10
-#define BCM540X_DSP_FILTER_ECHO (BIT_8 | BIT_9)
-#define BCM540X_DSP_FILTER_DFE BIT_9
-#define BCM540X_DSP_FILTER_FFE BIT_8
-
-#define BCM540X_DSP_CONTROL_ALL_FILTERS BIT_12
-
-#define BCM540X_DSP_SEL_CH_0 BIT_NONE
-#define BCM540X_DSP_SEL_CH_1 BIT_13
-#define BCM540X_DSP_SEL_CH_2 BIT_14
-#define BCM540X_DSP_SEL_CH_3 (BIT_13 | BIT_14)
-
-#define BCM540X_CONTROL_ALL_CHANNELS BIT_15
-
-
-/* Auxilliary Control Register (Shadow Register) */
-#define BCM5401_AUX_CTRL 0x18
-
-#define BCM5401_SHADOW_SEL_MASK 0x7
-#define BCM5401_SHADOW_SEL_NORMAL 0x00
-#define BCM5401_SHADOW_SEL_10BASET 0x01
-#define BCM5401_SHADOW_SEL_POWER_CONTROL 0x02
-#define BCM5401_SHADOW_SEL_IP_PHONE 0x03
-#define BCM5401_SHADOW_SEL_MISC_TEST1 0x04
-#define BCM5401_SHADOW_SEL_MISC_TEST2 0x05
-#define BCM5401_SHADOW_SEL_IP_PHONE_SEED 0x06
-
-
-/* Shadow register selector == '000' */
-#define BCM5401_SHDW_NORMAL_DIAG_MODE BIT_3
-#define BCM5401_SHDW_NORMAL_DISABLE_MBP BIT_4
-#define BCM5401_SHDW_NORMAL_DISABLE_LOW_PWR BIT_5
-#define BCM5401_SHDW_NORMAL_DISABLE_INV_PRF BIT_6
-#define BCM5401_SHDW_NORMAL_DISABLE_PRF BIT_7
-#define BCM5401_SHDW_NORMAL_RX_SLICING_NORMAL BIT_NONE
-#define BCM5401_SHDW_NORMAL_RX_SLICING_4D BIT_8
-#define BCM5401_SHDW_NORMAL_RX_SLICING_3LVL_1D BIT_9
-#define BCM5401_SHDW_NORMAL_RX_SLICING_5LVL_1D (BIT_8 | BIT_9)
-#define BCM5401_SHDW_NORMAL_TX_6DB_CODING BIT_10
-#define BCM5401_SHDW_NORMAL_ENABLE_SM_DSP_CLOCK BIT_11
-#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_4NS BIT_NONE
-#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_5NS BIT_12
-#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_3NS BIT_13
-#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_0NS (BIT_12 | BIT_13)
-#define BCM5401_SHDW_NORMAL_EXT_PACKET_LENGTH BIT_14
-#define BCM5401_SHDW_NORMAL_EXTERNAL_LOOPBACK BIT_15
-
-
-/* Auxilliary status summary. */
-#define BCM540X_AUX_STATUS_REG 0x19
-
-#define BCM540X_AUX_LINK_PASS BIT_2
-#define BCM540X_AUX_SPEED_MASK (BIT_8 | BIT_9 | BIT_10)
-#define BCM540X_AUX_10BASET_HD BIT_8
-#define BCM540X_AUX_10BASET_FD BIT_9
-#define BCM540X_AUX_100BASETX_HD (BIT_8 | BIT_9)
-#define BCM540X_AUX_100BASET4 BIT_10
-#define BCM540X_AUX_100BASETX_FD (BIT_8 | BIT_10)
-#define BCM540X_AUX_100BASET_HD (BIT_9 | BIT_10)
-#define BCM540X_AUX_100BASET_FD (BIT_8 | BIT_9 | BIT_10)
-
-
-/* Interrupt status. */
-#define BCM540X_INT_STATUS_REG 0x1a
-
-#define BCM540X_INT_LINK_CHANGE BIT_1
-#define BCM540X_INT_SPEED_CHANGE BIT_2
-#define BCM540X_INT_DUPLEX_CHANGE BIT_3
-#define BCM540X_INT_AUTO_NEG_PAGE_RX BIT_10
-
-
-/* Interrupt mask register. */
-#define BCM540X_INT_MASK_REG 0x1b
-
-/* BCM5461 x1c Shadow Control register */
-#define BCM546X_1c_SHADOW_REG 0x1c
-
-#define BCM546X_1c_WR_EN 0x8000 /* shadow (1c) write enable bit mask */
-
-#define BCM546X_1c_SPR_CTRL_1 0x0800 /* shadow (1c) reg 00010 addr */
-#define BCM546X_1c_SP1_LINK_LED 0x0001 /* shadow (1c) reg 00010 link LED mode mask */
-
-#define BCM546X_1c_SPR_CTRL_2 0x100C /* shadow (1c) reg 00100 addr */
-#define BCM546X_1c_SP2_NRG_DET 0x0002 /* shadow (1c) reg 00100 energy detect bit mask */
-
-
-
-/******************************************************************************/
-/* Register definitions. */
-/******************************************************************************/
-
-typedef volatile LM_UINT8 T3_8BIT_REGISTER, *PT3_8BIT_REGISTER;
-typedef volatile LM_UINT16 T3_16BIT_REGISTER, *PT3_16BIT_REGISTER;
-typedef volatile LM_UINT32 T3_32BIT_REGISTER, *PT3_32BIT_REGISTER;
-
-typedef struct {
- /* Big endian format. */
- T3_32BIT_REGISTER High;
- T3_32BIT_REGISTER Low;
-} T3_64BIT_REGISTER, *PT3_64BIT_REGISTER;
-
-typedef T3_64BIT_REGISTER T3_64BIT_HOST_ADDR, *PT3_64BIT_HOST_ADDR;
-
-#define T3_NUM_OF_DMA_DESC 256
-#define T3_NUM_OF_MBUF 768
-
-typedef struct
-{
- T3_64BIT_REGISTER host_addr;
- T3_32BIT_REGISTER nic_mbuf;
- T3_16BIT_REGISTER len;
- T3_16BIT_REGISTER cqid_sqid;
- T3_32BIT_REGISTER flags;
- T3_32BIT_REGISTER opaque1;
- T3_32BIT_REGISTER opaque2;
- T3_32BIT_REGISTER opaque3;
-}T3_DMA_DESC, *PT3_DMA_DESC;
-
-
-
-/******************************************************************************/
-/* Ring control block. */
-/******************************************************************************/
-
-typedef struct {
- T3_64BIT_REGISTER HostRingAddr;
-
- union {
- struct {
-#ifdef BIG_ENDIAN_HOST
- T3_16BIT_REGISTER MaxLen;
- T3_16BIT_REGISTER Flags;
-#else /* BIG_ENDIAN_HOST */
- T3_16BIT_REGISTER Flags;
- T3_16BIT_REGISTER MaxLen;
-#endif
- } s;
-
- T3_32BIT_REGISTER MaxLen_Flags;
- } u;
-
- T3_32BIT_REGISTER NicRingAddr;
-} T3_RCB, *PT3_RCB;
-
-#define T3_RCB_FLAG_USE_EXT_RECV_BD BIT_0
-#define T3_RCB_FLAG_RING_DISABLED BIT_1
-
-
-
-/******************************************************************************/
-/* Status block. */
-/******************************************************************************/
-
-/*
- * Size of status block is actually 0x50 bytes. Use 0x80 bytes for
- * cache line alignment.
- */
-#define T3_STATUS_BLOCK_SIZE 0x80
-
-typedef struct {
- volatile LM_UINT32 Status;
- #define STATUS_BLOCK_UPDATED BIT_0
- #define STATUS_BLOCK_LINK_CHANGED_STATUS BIT_1
- #define STATUS_BLOCK_ERROR BIT_2
-
- volatile LM_UINT32 StatusTag;
-
-#ifdef BIG_ENDIAN_HOST
- volatile LM_UINT16 RcvStdConIdx;
- volatile LM_UINT16 RcvJumboConIdx;
-
- volatile LM_UINT16 Reserved2;
- volatile LM_UINT16 RcvMiniConIdx;
-
- struct {
- volatile LM_UINT16 SendConIdx; /* Send consumer index. */
- volatile LM_UINT16 RcvProdIdx; /* Receive producer index. */
- } Idx[16];
-#else /* BIG_ENDIAN_HOST */
- volatile LM_UINT16 RcvJumboConIdx;
- volatile LM_UINT16 RcvStdConIdx;
-
- volatile LM_UINT16 RcvMiniConIdx;
- volatile LM_UINT16 Reserved2;
-
- struct {
- volatile LM_UINT16 RcvProdIdx; /* Receive producer index. */
- volatile LM_UINT16 SendConIdx; /* Send consumer index. */
- } Idx[16];
-#endif
-} T3_STATUS_BLOCK, *PT3_STATUS_BLOCK;
-
-
-
-/******************************************************************************/
-/* Receive buffer descriptors. */
-/******************************************************************************/
-
-typedef struct {
- T3_64BIT_HOST_ADDR HostAddr;
-
-#ifdef BIG_ENDIAN_HOST
- volatile LM_UINT16 Index;
- volatile LM_UINT16 Len;
-
- volatile LM_UINT16 Type;
- volatile LM_UINT16 Flags;
-
- volatile LM_UINT16 IpCksum;
- volatile LM_UINT16 TcpUdpCksum;
-
- volatile LM_UINT16 ErrorFlag;
- volatile LM_UINT16 VlanTag;
-#else /* BIG_ENDIAN_HOST */
- volatile LM_UINT16 Len;
- volatile LM_UINT16 Index;
-
- volatile LM_UINT16 Flags;
- volatile LM_UINT16 Type;
-
- volatile LM_UINT16 TcpUdpCksum;
- volatile LM_UINT16 IpCksum;
-
- volatile LM_UINT16 VlanTag;
- volatile LM_UINT16 ErrorFlag;
-#endif
-
- volatile LM_UINT32 Reserved;
- volatile LM_UINT32 Opaque;
-} T3_RCV_BD, *PT3_RCV_BD;
-
-
-typedef struct {
- T3_64BIT_HOST_ADDR HostAddr[3];
-
-#ifdef BIG_ENDIAN_HOST
- LM_UINT16 Len1;
- LM_UINT16 Len2;
-
- LM_UINT16 Len3;
- LM_UINT16 Reserved1;
-#else /* BIG_ENDIAN_HOST */
- LM_UINT16 Len2;
- LM_UINT16 Len1;
-
- LM_UINT16 Reserved1;
- LM_UINT16 Len3;
-#endif
-
- T3_RCV_BD StdRcvBd;
-} T3_EXT_RCV_BD, *PT3_EXT_RCV_BD;
-
-
-/* Error flags. */
-#define RCV_BD_ERR_BAD_CRC 0x0001
-#define RCV_BD_ERR_COLL_DETECT 0x0002
-#define RCV_BD_ERR_LINK_LOST_DURING_PKT 0x0004
-#define RCV_BD_ERR_PHY_DECODE_ERR 0x0008
-#define RCV_BD_ERR_ODD_NIBBLED_RCVD_MII 0x0010
-#define RCV_BD_ERR_MAC_ABORT 0x0020
-#define RCV_BD_ERR_LEN_LT_64 0x0040
-#define RCV_BD_ERR_TRUNC_NO_RESOURCES 0x0080
-#define RCV_BD_ERR_GIANT_FRAME_RCVD 0x0100
-
-
-/* Buffer descriptor flags. */
-#define RCV_BD_FLAG_END 0x0004
-#define RCV_BD_FLAG_JUMBO_RING 0x0020
-#define RCV_BD_FLAG_VLAN_TAG 0x0040
-#define RCV_BD_FLAG_FRAME_HAS_ERROR 0x0400
-#define RCV_BD_FLAG_MINI_RING 0x0800
-#define RCV_BD_FLAG_IP_CHKSUM_FIELD 0x1000
-#define RCV_BD_FLAG_TCP_UDP_CHKSUM_FIELD 0x2000
-#define RCV_BD_FLAG_TCP_PACKET 0x4000
-
-
-
-/******************************************************************************/
-/* Send buffer descriptor. */
-/******************************************************************************/
-
-typedef struct {
- T3_64BIT_HOST_ADDR HostAddr;
-
- union {
- struct {
-#ifdef BIG_ENDIAN_HOST
- LM_UINT16 Len;
- LM_UINT16 Flags;
-#else /* BIG_ENDIAN_HOST */
- LM_UINT16 Flags;
- LM_UINT16 Len;
-#endif
- } s1;
-
- LM_UINT32 Len_Flags;
- } u1;
-
- union {
- struct {
-#ifdef BIG_ENDIAN_HOST
- LM_UINT16 Reserved;
- LM_UINT16 VlanTag;
-#else /* BIG_ENDIAN_HOST */
- LM_UINT16 VlanTag;
- LM_UINT16 Reserved;
-#endif
- } s2;
-
- LM_UINT32 VlanTag;
- } u2;
-} T3_SND_BD, *PT3_SND_BD;
-
-
-/* Send buffer descriptor flags. */
-#define SND_BD_FLAG_TCP_UDP_CKSUM 0x0001
-#define SND_BD_FLAG_IP_CKSUM 0x0002
-#define SND_BD_FLAG_END 0x0004
-#define SND_BD_FLAG_IP_FRAG 0x0008
-#define SND_BD_FLAG_IP_FRAG_END 0x0010
-#define SND_BD_FLAG_VLAN_TAG 0x0040
-#define SND_BD_FLAG_COAL_NOW 0x0080
-#define SND_BD_FLAG_CPU_PRE_DMA 0x0100
-#define SND_BD_FLAG_CPU_POST_DMA 0x0200
-#define SND_BD_FLAG_INSERT_SRC_ADDR 0x1000
-#define SND_BD_FLAG_CHOOSE_SRC_ADDR 0x6000
-#define SND_BD_FLAG_DONT_GEN_CRC 0x8000
-
-/* MBUFs */
-typedef struct T3_MBUF_FRAME_DESC {
-#ifdef BIG_ENDIAN_HOST
- LM_UINT32 status_control;
- union {
- struct {
- LM_UINT8 cqid;
- LM_UINT8 reserved1;
- LM_UINT16 length;
- }s1;
- LM_UINT32 word;
- }u1;
- union {
- struct
- {
- LM_UINT16 ip_hdr_start;
- LM_UINT16 tcp_udp_hdr_start;
- }s2;
-
- LM_UINT32 word;
- }u2;
-
- union {
- struct {
- LM_UINT16 data_start;
- LM_UINT16 vlan_id;
- }s3;
-
- LM_UINT32 word;
- }u3;
-
- union {
- struct {
- LM_UINT16 ip_checksum;
- LM_UINT16 tcp_udp_checksum;
- }s4;
-
- LM_UINT32 word;
- }u4;
-
- union {
- struct {
- LM_UINT16 pseudo_checksum;
- LM_UINT16 checksum_status;
- }s5;
-
- LM_UINT32 word;
- }u5;
-
- union {
- struct {
- LM_UINT16 rule_match;
- LM_UINT8 class;
- LM_UINT8 rupt;
- }s6;
-
- LM_UINT32 word;
- }u6;
-
- union {
- struct {
- LM_UINT16 reserved2;
- LM_UINT16 mbuf_num;
- }s7;
-
- LM_UINT32 word;
- }u7;
-
- LM_UINT32 reserved3;
- LM_UINT32 reserved4;
-#else
- LM_UINT32 status_control;
- union {
- struct {
- LM_UINT16 length;
- LM_UINT8 reserved1;
- LM_UINT8 cqid;
- }s1;
- LM_UINT32 word;
- }u1;
- union {
- struct
- {
- LM_UINT16 tcp_udp_hdr_start;
- LM_UINT16 ip_hdr_start;
- }s2;
-
- LM_UINT32 word;
- }u2;
-
- union {
- struct {
- LM_UINT16 vlan_id;
- LM_UINT16 data_start;
- }s3;
-
- LM_UINT32 word;
- }u3;
-
- union {
- struct {
- LM_UINT16 tcp_udp_checksum;
- LM_UINT16 ip_checksum;
- }s4;
-
- LM_UINT32 word;
- }u4;
-
- union {
- struct {
- LM_UINT16 checksum_status;
- LM_UINT16 pseudo_checksum;
- }s5;
-
- LM_UINT32 word;
- }u5;
-
- union {
- struct {
- LM_UINT8 rupt;
- LM_UINT8 class;
- LM_UINT16 rule_match;
- }s6;
-
- LM_UINT32 word;
- }u6;
-
- union {
- struct {
- LM_UINT16 mbuf_num;
- LM_UINT16 reserved2;
- }s7;
-
- LM_UINT32 word;
- }u7;
-
- LM_UINT32 reserved3;
- LM_UINT32 reserved4;
-#endif
-}T3_MBUF_FRAME_DESC,*PT3_MBUF_FRAME_DESC;
-
-typedef struct T3_MBUF_HDR {
- union {
- struct {
- unsigned int C:1;
- unsigned int F:1;
- unsigned int reserved1:7;
- unsigned int next_mbuf:16;
- unsigned int length:7;
- }s1;
-
- LM_UINT32 word;
- }u1;
-
- LM_UINT32 next_frame_ptr;
-}T3_MBUF_HDR, *PT3_MBUF_HDR;
-
-typedef struct T3_MBUF
-{
- T3_MBUF_HDR hdr;
- union
- {
- struct {
- T3_MBUF_FRAME_DESC frame_hdr;
- LM_UINT32 data[20];
- }s1;
-
- struct {
- LM_UINT32 data[30];
- }s2;
- }body;
-}T3_MBUF, *PT3_MBUF;
-
-#define T3_MBUF_BASE (T3_NIC_MBUF_POOL_ADDR >> 7)
-#define T3_MBUF_END ((T3_NIC_MBUF_POOL_ADDR + T3_NIC_MBUF_POOL_SIZE) >> 7)
-
-
-
-/******************************************************************************/
-/* Statistics block. */
-/******************************************************************************/
-
-typedef struct {
- LM_UINT8 Reserved0[0x400-0x300];
-
- /* Statistics maintained by Receive MAC. */
- T3_64BIT_REGISTER ifHCInOctets;
- T3_64BIT_REGISTER Reserved1;
- T3_64BIT_REGISTER etherStatsFragments;
- T3_64BIT_REGISTER ifHCInUcastPkts;
- T3_64BIT_REGISTER ifHCInMulticastPkts;
- T3_64BIT_REGISTER ifHCInBroadcastPkts;
- T3_64BIT_REGISTER dot3StatsFCSErrors;
- T3_64BIT_REGISTER dot3StatsAlignmentErrors;
- T3_64BIT_REGISTER xonPauseFramesReceived;
- T3_64BIT_REGISTER xoffPauseFramesReceived;
- T3_64BIT_REGISTER macControlFramesReceived;
- T3_64BIT_REGISTER xoffStateEntered;
- T3_64BIT_REGISTER dot3StatsFramesTooLong;
- T3_64BIT_REGISTER etherStatsJabbers;
- T3_64BIT_REGISTER etherStatsUndersizePkts;
- T3_64BIT_REGISTER inRangeLengthError;
- T3_64BIT_REGISTER outRangeLengthError;
- T3_64BIT_REGISTER etherStatsPkts64Octets;
- T3_64BIT_REGISTER etherStatsPkts65Octetsto127Octets;
- T3_64BIT_REGISTER etherStatsPkts128Octetsto255Octets;
- T3_64BIT_REGISTER etherStatsPkts256Octetsto511Octets;
- T3_64BIT_REGISTER etherStatsPkts512Octetsto1023Octets;
- T3_64BIT_REGISTER etherStatsPkts1024Octetsto1522Octets;
- T3_64BIT_REGISTER etherStatsPkts1523Octetsto2047Octets;
- T3_64BIT_REGISTER etherStatsPkts2048Octetsto4095Octets;
- T3_64BIT_REGISTER etherStatsPkts4096Octetsto8191Octets;
- T3_64BIT_REGISTER etherStatsPkts8192Octetsto9022Octets;
-
- T3_64BIT_REGISTER Unused1[37];
-
- /* Statistics maintained by Transmit MAC. */
- T3_64BIT_REGISTER ifHCOutOctets;
- T3_64BIT_REGISTER Reserved2;
- T3_64BIT_REGISTER etherStatsCollisions;
- T3_64BIT_REGISTER outXonSent;
- T3_64BIT_REGISTER outXoffSent;
- T3_64BIT_REGISTER flowControlDone;
- T3_64BIT_REGISTER dot3StatsInternalMacTransmitErrors;
- T3_64BIT_REGISTER dot3StatsSingleCollisionFrames;
- T3_64BIT_REGISTER dot3StatsMultipleCollisionFrames;
- T3_64BIT_REGISTER dot3StatsDeferredTransmissions;
- T3_64BIT_REGISTER Reserved3;
- T3_64BIT_REGISTER dot3StatsExcessiveCollisions;
- T3_64BIT_REGISTER dot3StatsLateCollisions;
- T3_64BIT_REGISTER dot3Collided2Times;
- T3_64BIT_REGISTER dot3Collided3Times;
- T3_64BIT_REGISTER dot3Collided4Times;
- T3_64BIT_REGISTER dot3Collided5Times;
- T3_64BIT_REGISTER dot3Collided6Times;
- T3_64BIT_REGISTER dot3Collided7Times;
- T3_64BIT_REGISTER dot3Collided8Times;
- T3_64BIT_REGISTER dot3Collided9Times;
- T3_64BIT_REGISTER dot3Collided10Times;
- T3_64BIT_REGISTER dot3Collided11Times;
- T3_64BIT_REGISTER dot3Collided12Times;
- T3_64BIT_REGISTER dot3Collided13Times;
- T3_64BIT_REGISTER dot3Collided14Times;
- T3_64BIT_REGISTER dot3Collided15Times;
- T3_64BIT_REGISTER ifHCOutUcastPkts;
- T3_64BIT_REGISTER ifHCOutMulticastPkts;
- T3_64BIT_REGISTER ifHCOutBroadcastPkts;
- T3_64BIT_REGISTER dot3StatsCarrierSenseErrors;
- T3_64BIT_REGISTER ifOutDiscards;
- T3_64BIT_REGISTER ifOutErrors;
-
- T3_64BIT_REGISTER Unused2[31];
-
- /* Statistics maintained by Receive List Placement. */
- T3_64BIT_REGISTER COSIfHCInPkts[16];
- T3_64BIT_REGISTER COSFramesDroppedDueToFilters;
- T3_64BIT_REGISTER nicDmaWriteQueueFull;
- T3_64BIT_REGISTER nicDmaWriteHighPriQueueFull;
- T3_64BIT_REGISTER nicNoMoreRxBDs;
- T3_64BIT_REGISTER ifInDiscards;
- T3_64BIT_REGISTER ifInErrors;
- T3_64BIT_REGISTER nicRecvThresholdHit;
-
- T3_64BIT_REGISTER Unused3[9];
-
- /* Statistics maintained by Send Data Initiator. */
- T3_64BIT_REGISTER COSIfHCOutPkts[16];
- T3_64BIT_REGISTER nicDmaReadQueueFull;
- T3_64BIT_REGISTER nicDmaReadHighPriQueueFull;
- T3_64BIT_REGISTER nicSendDataCompQueueFull;
-
- /* Statistics maintained by Host Coalescing. */
- T3_64BIT_REGISTER nicRingSetSendProdIndex;
- T3_64BIT_REGISTER nicRingStatusUpdate;
- T3_64BIT_REGISTER nicInterrupts;
- T3_64BIT_REGISTER nicAvoidedInterrupts;
- T3_64BIT_REGISTER nicSendThresholdHit;
-
- LM_UINT8 Reserved4[0xb00-0x9c0];
-} T3_STATS_BLOCK, *PT3_STATS_BLOCK;
-
-
-
-/******************************************************************************/
-/* PCI configuration registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_16BIT_REGISTER VendorId;
- T3_16BIT_REGISTER DeviceId;
-
- T3_16BIT_REGISTER Command;
- T3_16BIT_REGISTER Status;
-
- T3_32BIT_REGISTER ClassCodeRevId;
-
- T3_8BIT_REGISTER CacheLineSize;
- T3_8BIT_REGISTER LatencyTimer;
- T3_8BIT_REGISTER HeaderType;
- T3_8BIT_REGISTER Bist;
-
- T3_32BIT_REGISTER MemBaseAddrLow;
- T3_32BIT_REGISTER MemBaseAddrHigh;
-
- LM_UINT8 Unused1[20];
-
- T3_16BIT_REGISTER SubsystemVendorId;
- T3_16BIT_REGISTER SubsystemId;
-
- T3_32BIT_REGISTER RomBaseAddr;
-
- T3_8BIT_REGISTER PciXCapiblityPtr;
- LM_UINT8 Unused2[7];
-
- T3_8BIT_REGISTER IntLine;
- T3_8BIT_REGISTER IntPin;
- T3_8BIT_REGISTER MinGnt;
- T3_8BIT_REGISTER MaxLat;
-
- T3_8BIT_REGISTER PciXCapabilities;
- T3_8BIT_REGISTER PmCapabilityPtr;
- T3_16BIT_REGISTER PciXCommand;
- #define PXC_MAX_READ_BYTE_COUNT_MASK (BIT_3 | BIT_2)
- #define PXC_MAX_READ_BYTE_COUNT_512 (0)
- #define PXC_MAX_READ_BYTE_COUNT_1024 (BIT_2)
- #define PXC_MAX_READ_BYTE_COUNT_2048 (BIT_3)
- #define PXC_MAX_READ_BYTE_COUNT_4096 (BIT_3 | BIT_2)
-
- T3_32BIT_REGISTER PciXStatus;
-
- T3_8BIT_REGISTER PmCapabilityId;
- T3_8BIT_REGISTER VpdCapabilityPtr;
- T3_16BIT_REGISTER PmCapabilities;
-
- T3_16BIT_REGISTER PmCtrlStatus;
- #define PM_CTRL_PME_STATUS BIT_15
- #define PM_CTRL_PME_ENABLE BIT_8
- #define PM_CTRL_PME_POWER_STATE_D0 0
- #define PM_CTRL_PME_POWER_STATE_D1 1
- #define PM_CTRL_PME_POWER_STATE_D2 2
- #define PM_CTRL_PME_POWER_STATE_D3H 3
-
- T3_8BIT_REGISTER BridgeSupportExt;
- T3_8BIT_REGISTER PmData;
-
- T3_8BIT_REGISTER VpdCapabilityId;
- T3_8BIT_REGISTER MsiCapabilityPtr;
- T3_16BIT_REGISTER VpdAddrFlag;
- #define VPD_FLAG_WRITE (1 << 15)
- #define VPD_FLAG_RW_MASK (1 << 15)
- #define VPD_FLAG_READ 0
-
-
- T3_32BIT_REGISTER VpdData;
-
- T3_8BIT_REGISTER MsiCapabilityId;
- T3_8BIT_REGISTER NextCapabilityPtr;
- T3_16BIT_REGISTER MsiCtrl;
- #define MSI_CTRL_64BIT_CAP (1 << 7)
- #define MSI_CTRL_MSG_ENABLE(x) (x << 4)
- #define MSI_CTRL_MSG_CAP(x) (x << 1)
- #define MSI_CTRL_ENABLE (1 << 0)
-
-
- T3_32BIT_REGISTER MsiAddrLow;
- T3_32BIT_REGISTER MsiAddrHigh;
-
- T3_16BIT_REGISTER MsiData;
- T3_16BIT_REGISTER Unused3;
-
- T3_32BIT_REGISTER MiscHostCtrl;
- #define MISC_HOST_CTRL_CLEAR_INT BIT_0
- #define MISC_HOST_CTRL_MASK_PCI_INT BIT_1
- #define MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP BIT_2
- #define MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP BIT_3
- #define MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW BIT_4
- #define MISC_HOST_CTRL_ENABLE_CLK_REG_RW BIT_5
- #define MISC_HOST_CTRL_ENABLE_REG_WORD_SWAP BIT_6
- #define MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS BIT_7
- #define MISC_HOST_CTRL_ENABLE_INT_MASK_MODE BIT_8
- #define MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE BIT_9
-
- T3_32BIT_REGISTER DmaReadWriteCtrl;
- #define DMA_CTRL_WRITE_CMD 0x70000000
- #define DMA_CTRL_WRITE_BOUNDARY_64_PCIE 0x10000000
- #define DMA_CTRL_WRITE_BOUNDARY_128_PCIE 0x30000000
- #define DMA_CTRL_WRITE_BOUNDARY_DISABLE_PCIE 0x70000000
- #define DMA_CTRL_READ_CMD 0x06000000
-
- /* bits 21:19 */
- #define DMA_CTRL_WRITE_PCIE_H20MARK_128 0x00180000
- #define DMA_CTRL_WRITE_PCIE_H20MARK_256 0x00380000
-
- #define DMA_CTRL_PCIX_READ_WATERMARK_MASK (BIT_18 | BIT_17 | BIT_16)
- #define DMA_CTRL_PCIX_READ_WATERMARK_64 (0)
- #define DMA_CTRL_PCIX_READ_WATERMARK_128 (BIT_16)
- #define DMA_CTRL_PCIX_READ_WATERMARK_256 (BIT_17)
- #define DMA_CTRL_PCIX_READ_WATERMARK_384 (BIT_17 | BIT_16)
- #define DMA_CTRL_PCIX_READ_WATERMARK_512 (BIT_18)
- #define DMA_CTRL_PCIX_READ_WATERMARK_1024 (BIT_18 | BIT_16)
- #define DMA_CTRL_PCIX_READ_WATERMARK_1536X (BIT_18 | BIT_17)
- #define DMA_CTRL_PCIX_READ_WATERMARK_1536 (BIT_18 | BIT_17 | BIT_16)
-
- #define DMA_CTRL_WRITE_BOUNDARY_MASK (BIT_11 | BIT_12 | BIT_13)
- #define DMA_CTRL_WRITE_BOUNDARY_DISABLE 0
- #define DMA_CTRL_WRITE_BOUNDARY_16 BIT_11
- #define DMA_CTRL_WRITE_BOUNDARY_128_PCIX BIT_11
- #define DMA_CTRL_WRITE_BOUNDARY_32 BIT_12
- #define DMA_CTRL_WRITE_BOUNDARY_256_PCIX BIT_12
- #define DMA_CTRL_WRITE_BOUNDARY_64 (BIT_12 | BIT_11)
- #define DMA_CTRL_WRITE_BOUNDARY_384_PCIX (BIT_12 | BIT_11)
- #define DMA_CTRL_WRITE_BOUNDARY_128 BIT_13
- #define DMA_CTRL_WRITE_BOUNDARY_256 (BIT_13 | BIT_11)
- #define DMA_CTRL_WRITE_BOUNDARY_512 (BIT_13 | BIT_12)
- #define DMA_CTRL_WRITE_BOUNDARY_1024 (BIT_13 | BIT_12 | BIT_11)
- #define DMA_CTRL_WRITE_ONE_DMA_AT_ONCE BIT_14
-
- #define DMA_CTRL_READ_BOUNDARY_MASK (BIT_10 | BIT_9 | BIT_8)
- #define DMA_CTRL_READ_BOUNDARY_DISABLE 0
- #define DMA_CTRL_READ_BOUNDARY_16 BIT_8
- #define DMA_CTRL_READ_BOUNDARY_128_PCIX BIT_8
- #define DMA_CTRL_READ_BOUNDARY_32 BIT_9
- #define DMA_CTRL_READ_BOUNDARY_256_PCIX BIT_9
- #define DMA_CTRL_READ_BOUNDARY_64 (BIT_9 | BIT_8)
- #define DMA_CTRL_READ_BOUNDARY_384_PCIX (BIT_9 | BIT_8)
- #define DMA_CTRL_READ_BOUNDARY_128 BIT_10
- #define DMA_CTRL_READ_BOUNDARY_256 (BIT_10 | BIT_8)
- #define DMA_CTRL_READ_BOUNDARY_512 (BIT_10 | BIT_9)
- #define DMA_CTRL_READ_BOUNDARY_1024 (BIT_10 | BIT_9 | BIT_8)
-
- T3_32BIT_REGISTER PciState;
- #define T3_PCI_STATE_FORCE_PCI_RESET BIT_0
- #define T3_PCI_STATE_INTERRUPT_NOT_ACTIVE BIT_1
- #define T3_PCI_STATE_NOT_PCI_X_BUS BIT_2
- #define T3_PCI_STATE_HIGH_BUS_SPEED BIT_3
- #define T3_PCI_STATE_32BIT_PCI_BUS BIT_4
- #define T3_PCI_STATE_PCI_ROM_ENABLE BIT_5
- #define T3_PCI_STATE_PCI_ROM_RETRY_ENABLE BIT_6
- #define T3_PCI_STATE_FLAT_VIEW BIT_8
- #define T3_PCI_STATE_RETRY_SAME_DMA BIT_13
-
- T3_32BIT_REGISTER ClockCtrl;
- #define T3_PCI_CLKCTRL_TXCPU_CLK_DISABLE BIT_11
- #define T3_PCI_CLKCTRL_RXCPU_CLK_DISABLE BIT_10
- #define T3_PCI_CLKCTRL_CORE_CLK_DISABLE BIT_9
-
- T3_32BIT_REGISTER RegBaseAddr;
-
- T3_32BIT_REGISTER MemWindowBaseAddr;
-
-#ifdef NIC_CPU_VIEW
- /* These registers are ONLY visible to NIC CPU */
- T3_32BIT_REGISTER PowerConsumed;
- T3_32BIT_REGISTER PowerDissipated;
-#else /* NIC_CPU_VIEW */
- T3_32BIT_REGISTER RegData;
- T3_32BIT_REGISTER MemWindowData;
-#endif /* !NIC_CPU_VIEW */
-
- T3_32BIT_REGISTER ModeCtrl;
-
- T3_32BIT_REGISTER MiscCfg;
-
- T3_32BIT_REGISTER MiscLocalCtrl;
-
- T3_32BIT_REGISTER Unused4;
-
- /* NOTE: Big/Little-endian clarification needed. Are these register */
- /* in big or little endian formate. */
- T3_64BIT_REGISTER StdRingProdIdx;
- T3_64BIT_REGISTER RcvRetRingConIdx;
- T3_64BIT_REGISTER SndProdIdx;
-
- T3_32BIT_REGISTER Unused5[2]; /* 0xb0-0xb7 */
-
- T3_32BIT_REGISTER DualMacCtrl; /* 0xb8 */
- #define T3_DUAL_MAC_CH_CTRL_MASK (BIT_1 | BIT_0)
- #define T3_DUAL_MAC_ID BIT_2
-
- T3_32BIT_REGISTER MacMessageExchangeOutput; /* 0xbc */
- T3_32BIT_REGISTER MacMessageExchangeInput; /* 0xc0 */
-
- T3_32BIT_REGISTER FunctionEventMask; /* 0xc4 */
-
- T3_32BIT_REGISTER Unused6[4]; /* 0xc8-0xd7 */
-
- T3_32BIT_REGISTER DeviceCtrl; /* 0xd8 */
- #define MAX_PAYLOAD_SIZE_MASK 0x0e0
-
- LM_UINT8 Unused7[36];
-
-} T3_PCI_CONFIGURATION, *PT3_PCI_CONFIGURATION;
-
-#define PCIX_CMD_MAX_SPLIT_MASK 0x00700000
-#define PCIX_CMD_MAX_SPLIT_SHL 20
-#define PCIX_CMD_MAX_BURST_MASK 0x000c0000
-#define PCIX_CMD_MAX_BURST_SHL 18
-#define PCIX_CMD_MAX_BURST_CPIOB 2
-
-/******************************************************************************/
-/* Mac control registers. */
-/******************************************************************************/
-
-typedef struct {
- /* MAC mode control. */
- T3_32BIT_REGISTER Mode;
- #define MAC_MODE_GLOBAL_RESET BIT_0
- #define MAC_MODE_HALF_DUPLEX BIT_1
- #define MAC_MODE_PORT_MODE_MASK (BIT_2 | BIT_3)
- #define MAC_MODE_PORT_MODE_TBI (BIT_2 | BIT_3)
- #define MAC_MODE_PORT_MODE_GMII BIT_3
- #define MAC_MODE_PORT_MODE_MII BIT_2
- #define MAC_MODE_PORT_MODE_NONE BIT_NONE
- #define MAC_MODE_PORT_INTERNAL_LOOPBACK BIT_4
- #define MAC_MODE_TAGGED_MAC_CONTROL BIT_7
- #define MAC_MODE_TX_BURSTING BIT_8
- #define MAC_MODE_MAX_DEFER BIT_9
- #define MAC_MODE_LINK_POLARITY BIT_10
- #define MAC_MODE_ENABLE_RX_STATISTICS BIT_11
- #define MAC_MODE_CLEAR_RX_STATISTICS BIT_12
- #define MAC_MODE_FLUSH_RX_STATISTICS BIT_13
- #define MAC_MODE_ENABLE_TX_STATISTICS BIT_14
- #define MAC_MODE_CLEAR_TX_STATISTICS BIT_15
- #define MAC_MODE_FLUSH_TX_STATISTICS BIT_16
- #define MAC_MODE_SEND_CONFIGS BIT_17
- #define MAC_MODE_DETECT_MAGIC_PACKET_ENABLE BIT_18
- #define MAC_MODE_ACPI_POWER_ON_ENABLE BIT_19
- #define MAC_MODE_ENABLE_MIP BIT_20
- #define MAC_MODE_ENABLE_TDE BIT_21
- #define MAC_MODE_ENABLE_RDE BIT_22
- #define MAC_MODE_ENABLE_FHDE BIT_23
-
- /* MAC status */
- T3_32BIT_REGISTER Status;
- #define MAC_STATUS_PCS_SYNCED BIT_0
- #define MAC_STATUS_SIGNAL_DETECTED BIT_1
- #define MAC_STATUS_RECEIVING_CFG BIT_2
- #define MAC_STATUS_CFG_CHANGED BIT_3
- #define MAC_STATUS_SYNC_CHANGED BIT_4
- #define MAC_STATUS_PORT_DECODE_ERROR BIT_10
- #define MAC_STATUS_LINK_STATE_CHANGED BIT_12
- #define MAC_STATUS_MI_COMPLETION BIT_22
- #define MAC_STATUS_MI_INTERRUPT BIT_23
- #define MAC_STATUS_AP_ERROR BIT_24
- #define MAC_STATUS_ODI_ERROR BIT_25
- #define MAC_STATUS_RX_STATS_OVERRUN BIT_26
- #define MAC_STATUS_TX_STATS_OVERRUN BIT_27
-
- /* Event Enable */
- T3_32BIT_REGISTER MacEvent;
- #define MAC_EVENT_ENABLE_PORT_DECODE_ERR BIT_10
- #define MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN BIT_12
- #define MAC_EVENT_ENABLE_MI_COMPLETION BIT_22
- #define MAC_EVENT_ENABLE_MI_INTERRUPT BIT_23
- #define MAC_EVENT_ENABLE_AP_ERROR BIT_24
- #define MAC_EVENT_ENABLE_ODI_ERROR BIT_25
- #define MAC_EVENT_ENABLE_RX_STATS_OVERRUN BIT_26
- #define MAC_EVENT_ENABLE_TX_STATS_OVERRUN BIT_27
-
- /* Led control. */
- T3_32BIT_REGISTER LedCtrl;
- #define LED_CTRL_OVERRIDE_LINK_LED BIT_0
- #define LED_CTRL_1000MBPS_LED_ON BIT_1
- #define LED_CTRL_100MBPS_LED_ON BIT_2
- #define LED_CTRL_10MBPS_LED_ON BIT_3
- #define LED_CTRL_OVERRIDE_TRAFFIC_LED BIT_4
- #define LED_CTRL_BLINK_TRAFFIC_LED BIT_5
- #define LED_CTRL_TRAFFIC_LED BIT_6
- #define LED_CTRL_1000MBPS_LED_STATUS BIT_7
- #define LED_CTRL_100MBPS_LED_STATUS BIT_8
- #define LED_CTRL_10MBPS_LED_STATUS BIT_9
- #define LED_CTRL_TRAFFIC_LED_STATUS BIT_10
- #define LED_CTRL_MAC_MODE BIT_NONE
- #define LED_CTRL_PHY_MODE_1 BIT_11
- #define LED_CTRL_PHY_MODE_2 BIT_12
- #define LED_CTRL_SHASTA_MAC_MODE BIT_13
- #define LED_CTRL_SHARED_TRAFFIC_LINK BIT_14
- #define LED_CTRL_WIRELESS_COMBO BIT_15
- #define LED_CTRL_BLINK_RATE_MASK 0x7ff80000
- #define LED_CTRL_OVERRIDE_BLINK_PERIOD BIT_19
- #define LED_CTRL_OVERRIDE_BLINK_RATE BIT_31
-
- /* MAC addresses. */
- struct {
- T3_32BIT_REGISTER High; /* Upper 2 bytes. */
- T3_32BIT_REGISTER Low; /* Lower 4 bytes. */
- } MacAddr[4];
-
- /* ACPI Mbuf pointer. */
- T3_32BIT_REGISTER AcpiMbufPtr;
-
- /* ACPI Length and Offset. */
- T3_32BIT_REGISTER AcpiLengthOffset;
- #define ACPI_LENGTH_MASK 0xffff
- #define ACPI_OFFSET_MASK 0x0fff0000
- #define ACPI_LENGTH(x) x
- #define ACPI_OFFSET(x) ((x) << 16)
-
- /* Transmit random backoff. */
- T3_32BIT_REGISTER TxBackoffSeed;
- #define MAC_TX_BACKOFF_SEED_MASK 0x3ff
-
- /* Receive MTU */
- T3_32BIT_REGISTER MtuSize;
- #define MAC_RX_MTU_MASK 0xffff
-
- /* Gigabit PCS Test. */
- T3_32BIT_REGISTER PcsTest;
- #define MAC_PCS_TEST_DATA_PATTERN_MASK 0x0fffff
- #define MAC_PCS_TEST_ENABLE BIT_20
-
- /* Transmit Gigabit Auto-Negotiation. */
- T3_32BIT_REGISTER TxAutoNeg;
- #define MAC_AN_TX_AN_DATA_MASK 0xffff
-
- /* Receive Gigabit Auto-Negotiation. */
- T3_32BIT_REGISTER RxAutoNeg;
- #define MAC_AN_RX_AN_DATA_MASK 0xffff
-
- /* MI Communication. */
- T3_32BIT_REGISTER MiCom;
- #define MI_COM_CMD_MASK (BIT_26 | BIT_27)
- #define MI_COM_CMD_WRITE BIT_26
- #define MI_COM_CMD_READ BIT_27
- #define MI_COM_READ_FAILED BIT_28
- #define MI_COM_START BIT_29
- #define MI_COM_BUSY BIT_29
-
- #define MI_COM_PHY_ADDR_MASK 0x1f
- #define MI_COM_FIRST_PHY_ADDR_BIT 21
-
- #define MI_COM_PHY_REG_ADDR_MASK 0x1f
- #define MI_COM_FIRST_PHY_REG_ADDR_BIT 16
-
- #define MI_COM_PHY_DATA_MASK 0xffff
-
- /* MI Status. */
- T3_32BIT_REGISTER MiStatus;
- #define MI_STATUS_ENABLE_LINK_STATUS_ATTN BIT_0
- #define MI_STATUS_10MBPS BIT_1
-
- /* MI Mode. */
- T3_32BIT_REGISTER MiMode;
- #define MI_MODE_CLOCK_SPEED_10MHZ BIT_0
- #define MI_MODE_USE_SHORT_PREAMBLE BIT_1
- #define MI_MODE_AUTO_POLLING_ENABLE BIT_4
- #define MI_MODE_CORE_CLOCK_SPEED_62MHZ BIT_15
-
- /* Auto-polling status. */
- T3_32BIT_REGISTER AutoPollStatus;
- #define AUTO_POLL_ERROR BIT_0
-
- /* Transmit MAC mode. */
- T3_32BIT_REGISTER TxMode;
- #define TX_MODE_RESET BIT_0
- #define TX_MODE_ENABLE BIT_1
- #define TX_MODE_ENABLE_FLOW_CONTROL BIT_4
- #define TX_MODE_ENABLE_BIG_BACKOFF BIT_5
- #define TX_MODE_ENABLE_LONG_PAUSE BIT_6
-
- /* Transmit MAC status. */
- T3_32BIT_REGISTER TxStatus;
- #define TX_STATUS_RX_CURRENTLY_XOFFED BIT_0
- #define TX_STATUS_SENT_XOFF BIT_1
- #define TX_STATUS_SENT_XON BIT_2
- #define TX_STATUS_LINK_UP BIT_3
- #define TX_STATUS_ODI_UNDERRUN BIT_4
- #define TX_STATUS_ODI_OVERRUN BIT_5
-
- /* Transmit MAC length. */
- T3_32BIT_REGISTER TxLengths;
- #define TX_LEN_SLOT_TIME_MASK 0xff
- #define TX_LEN_IPG_MASK 0x0f00
- #define TX_LEN_IPG_CRS_MASK (BIT_12 | BIT_13)
-
- /* Receive MAC mode. */
- T3_32BIT_REGISTER RxMode;
- #define RX_MODE_RESET BIT_0
- #define RX_MODE_ENABLE BIT_1
- #define RX_MODE_ENABLE_FLOW_CONTROL BIT_2
- #define RX_MODE_KEEP_MAC_CONTROL BIT_3
- #define RX_MODE_KEEP_PAUSE BIT_4
- #define RX_MODE_ACCEPT_OVERSIZED BIT_5
- #define RX_MODE_ACCEPT_RUNTS BIT_6
- #define RX_MODE_LENGTH_CHECK BIT_7
- #define RX_MODE_PROMISCUOUS_MODE BIT_8
- #define RX_MODE_NO_CRC_CHECK BIT_9
- #define RX_MODE_KEEP_VLAN_TAG BIT_10
-
- /* Receive MAC status. */
- T3_32BIT_REGISTER RxStatus;
- #define RX_STATUS_REMOTE_TRANSMITTER_XOFFED BIT_0
- #define RX_STATUS_XOFF_RECEIVED BIT_1
- #define RX_STATUS_XON_RECEIVED BIT_2
-
- /* Hash registers. */
- T3_32BIT_REGISTER HashReg[4];
-
- /* Receive placement rules registers. */
- struct {
- T3_32BIT_REGISTER Rule;
- T3_32BIT_REGISTER Value;
- } RcvRules[16];
-
- #define RCV_DISABLE_RULE_MASK 0x7fffffff
-
- #define RCV_RULE1_REJECT_BROADCAST_IDX 0x00
- #define REJECT_BROADCAST_RULE1_RULE 0xc2000000
- #define REJECT_BROADCAST_RULE1_VALUE 0xffffffff
-
- #define RCV_RULE2_REJECT_BROADCAST_IDX 0x01
- #define REJECT_BROADCAST_RULE2_RULE 0x86000004
- #define REJECT_BROADCAST_RULE2_VALUE 0xffffffff
-
-#if INCLUDE_5701_AX_FIX
- #define RCV_LAST_RULE_IDX 0x04
-#else
- #define RCV_LAST_RULE_IDX 0x02
-#endif
-
- T3_32BIT_REGISTER RcvRuleCfg;
- #define RX_RULE_DEFAULT_CLASS (1 << 3)
-
- T3_32BIT_REGISTER LowWaterMarkMaxRxFrame;
-
- LM_UINT8 Reserved1[24];
-
- T3_32BIT_REGISTER HashRegU[4];
-
- struct {
- T3_32BIT_REGISTER High;
- T3_32BIT_REGISTER Low;
- } MacAddrExt[12];
-
- T3_32BIT_REGISTER SerdesCfg;
- T3_32BIT_REGISTER SerdesStatus;
-
- LM_UINT8 Reserved2[24];
-
- T3_32BIT_REGISTER SgDigControl;
- T3_32BIT_REGISTER SgDigStatus;
-
- LM_UINT8 Reserved3[72];
-
- volatile LM_UINT8 TxMacState[16];
- volatile LM_UINT8 RxMacState[20];
-
- LM_UINT8 Reserved4[476];
-
- T3_32BIT_REGISTER ifHCOutOctets;
- T3_32BIT_REGISTER Reserved5;
- T3_32BIT_REGISTER etherStatsCollisions;
- T3_32BIT_REGISTER outXonSent;
- T3_32BIT_REGISTER outXoffSent;
- T3_32BIT_REGISTER Reserved6;
- T3_32BIT_REGISTER dot3StatsInternalMacTransmitErrors;
- T3_32BIT_REGISTER dot3StatsSingleCollisionFrames;
- T3_32BIT_REGISTER dot3StatsMultipleCollisionFrames;
- T3_32BIT_REGISTER dot3StatsDeferredTransmissions;
- T3_32BIT_REGISTER Reserved7;
- T3_32BIT_REGISTER dot3StatsExcessiveCollisions;
- T3_32BIT_REGISTER dot3StatsLateCollisions;
- T3_32BIT_REGISTER Reserved8[14];
- T3_32BIT_REGISTER ifHCOutUcastPkts;
- T3_32BIT_REGISTER ifHCOutMulticastPkts;
- T3_32BIT_REGISTER ifHCOutBroadcastPkts;
- T3_32BIT_REGISTER Reserved9[2];
- T3_32BIT_REGISTER ifHCInOctets;
- T3_32BIT_REGISTER Reserved10;
- T3_32BIT_REGISTER etherStatsFragments;
- T3_32BIT_REGISTER ifHCInUcastPkts;
- T3_32BIT_REGISTER ifHCInMulticastPkts;
- T3_32BIT_REGISTER ifHCInBroadcastPkts;
- T3_32BIT_REGISTER dot3StatsFCSErrors;
- T3_32BIT_REGISTER dot3StatsAlignmentErrors;
- T3_32BIT_REGISTER xonPauseFramesReceived;
- T3_32BIT_REGISTER xoffPauseFramesReceived;
- T3_32BIT_REGISTER macControlFramesReceived;
- T3_32BIT_REGISTER xoffStateEntered;
- T3_32BIT_REGISTER dot3StatsFramesTooLong;
- T3_32BIT_REGISTER etherStatsJabbers;
- T3_32BIT_REGISTER etherStatsUndersizePkts;
-
- T3_32BIT_REGISTER Reserved11[209];
-
-} T3_MAC_CONTROL, *PT3_MAC_CONTROL;
-
-
-
-/******************************************************************************/
-/* Send data initiator control registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define T3_SND_DATA_IN_MODE_RESET BIT_0
- #define T3_SND_DATA_IN_MODE_ENABLE BIT_1
- #define T3_SND_DATA_IN_MODE_STATS_OFLW_ATTN_ENABLE BIT_2
-
- T3_32BIT_REGISTER Status;
- #define T3_SND_DATA_IN_STATUS_STATS_OFLW_ATTN BIT_2
-
- T3_32BIT_REGISTER StatsCtrl;
- #define T3_SND_DATA_IN_STATS_CTRL_ENABLE BIT_0
- #define T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE BIT_1
- #define T3_SND_DATA_IN_STATS_CTRL_CLEAR BIT_2
- #define T3_SND_DATA_IN_STATS_CTRL_FLUSH BIT_3
- #define T3_SND_DATA_IN_STATS_CTRL_FORCE_ZERO BIT_4
-
- T3_32BIT_REGISTER StatsEnableMask;
-
- T3_32BIT_REGISTER StatsIncMask;
-
- LM_UINT8 Reserved[108];
-
- T3_32BIT_REGISTER ClassOfServCnt[16];
- T3_32BIT_REGISTER DmaReadQFullCnt;
- T3_32BIT_REGISTER DmaPriorityReadQFullCnt;
- T3_32BIT_REGISTER SdcQFullCnt;
-
- T3_32BIT_REGISTER NicRingSetSendProdIdxCnt;
- T3_32BIT_REGISTER StatusUpdatedCnt;
- T3_32BIT_REGISTER InterruptsCnt;
- T3_32BIT_REGISTER AvoidInterruptsCnt;
- T3_32BIT_REGISTER SendThresholdHitCnt;
-
- /* Unused space. */
- LM_UINT8 Unused[800];
-} T3_SEND_DATA_INITIATOR, *PT3_SEND_DATA_INITIATOR;
-
-
-
-/******************************************************************************/
-/* Send data completion control registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define SND_DATA_COMP_MODE_RESET BIT_0
- #define SND_DATA_COMP_MODE_ENABLE BIT_1
-
- /* Unused space. */
- LM_UINT8 Unused[1020];
-} T3_SEND_DATA_COMPLETION, *PT3_SEND_DATA_COMPLETION;
-
-
-
-/******************************************************************************/
-/* Send BD Ring Selector Control Registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define SND_BD_SEL_MODE_RESET BIT_0
- #define SND_BD_SEL_MODE_ENABLE BIT_1
- #define SND_BD_SEL_MODE_ATTN_ENABLE BIT_2
-
- T3_32BIT_REGISTER Status;
- #define SND_BD_SEL_STATUS_ERROR_ATTN BIT_2
-
- T3_32BIT_REGISTER HwDiag;
-
- /* Unused space. */
- LM_UINT8 Unused1[52];
-
- /* Send BD Ring Selector Local NIC Send BD Consumer Index. */
- T3_32BIT_REGISTER NicSendBdSelConIdx[16];
-
- /* Unused space. */
- LM_UINT8 Unused2[896];
-} T3_SEND_BD_SELECTOR, *PT3_SEND_BD_SELECTOR;
-
-
-
-/******************************************************************************/
-/* Send BD initiator control registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define SND_BD_IN_MODE_RESET BIT_0
- #define SND_BD_IN_MODE_ENABLE BIT_1
- #define SND_BD_IN_MODE_ATTN_ENABLE BIT_2
-
- T3_32BIT_REGISTER Status;
- #define SND_BD_IN_STATUS_ERROR_ATTN BIT_2
-
- /* Send BD initiator local NIC send BD producer index. */
- T3_32BIT_REGISTER NicSendBdInProdIdx[16];
-
- /* Unused space. */
- LM_UINT8 Unused2[952];
-} T3_SEND_BD_INITIATOR, *PT3_SEND_BD_INITIATOR;
-
-
-
-/******************************************************************************/
-/* Send BD Completion Control. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define SND_BD_COMP_MODE_RESET BIT_0
- #define SND_BD_COMP_MODE_ENABLE BIT_1
- #define SND_BD_COMP_MODE_ATTN_ENABLE BIT_2
-
- /* Unused space. */
- LM_UINT8 Unused2[1020];
-} T3_SEND_BD_COMPLETION, *PT3_SEND_BD_COMPLETION;
-
-
-
-/******************************************************************************/
-/* Receive list placement control registers. */
-/******************************************************************************/
-
-typedef struct {
- /* Mode. */
- T3_32BIT_REGISTER Mode;
- #define RCV_LIST_PLMT_MODE_RESET BIT_0
- #define RCV_LIST_PLMT_MODE_ENABLE BIT_1
- #define RCV_LIST_PLMT_MODE_CLASS0_ATTN_ENABLE BIT_2
- #define RCV_LIST_PLMT_MODE_MAPPING_OOR_ATTN_ENABLE BIT_3
- #define RCV_LIST_PLMT_MODE_STATS_OFLOW_ATTN_ENABLE BIT_4
-
- /* Status. */
- T3_32BIT_REGISTER Status;
- #define RCV_LIST_PLMT_STATUS_CLASS0_ATTN BIT_2
- #define RCV_LIST_PLMT_STATUS_MAPPING_ATTN BIT_3
- #define RCV_LIST_PLMT_STATUS_STATS_OFLOW_ATTN BIT_4
-
- /* Receive selector list lock register. */
- T3_32BIT_REGISTER Lock;
- #define RCV_LIST_SEL_LOCK_REQUEST_MASK 0xffff
- #define RCV_LIST_SEL_LOCK_GRANT_MASK 0xffff0000
-
- /* Selector non-empty bits. */
- T3_32BIT_REGISTER NonEmptyBits;
- #define RCV_LIST_SEL_NON_EMPTY_MASK 0xffff
-
- /* Receive list placement configuration register. */
- T3_32BIT_REGISTER Config;
-
- /* Receive List Placement statistics Control. */
- T3_32BIT_REGISTER StatsCtrl;
-#define RCV_LIST_STATS_ENABLE BIT_0
-#define RCV_LIST_STATS_FAST_UPDATE BIT_1
-
- /* Receive List Placement statistics Enable Mask. */
- T3_32BIT_REGISTER StatsEnableMask;
- #define T3_DISABLE_LONG_BURST_READ_DYN_FIX BIT_22
-
- /* Receive List Placement statistics Increment Mask. */
- T3_32BIT_REGISTER StatsIncMask;
-
- /* Unused space. */
- LM_UINT8 Unused1[224];
-
- struct {
- T3_32BIT_REGISTER Head;
- T3_32BIT_REGISTER Tail;
- T3_32BIT_REGISTER Count;
-
- /* Unused space. */
- LM_UINT8 Unused[4];
- } RcvSelectorList[16];
-
- /* Local statistics counter. */
- T3_32BIT_REGISTER ClassOfServCnt[16];
-
- T3_32BIT_REGISTER DropDueToFilterCnt;
- T3_32BIT_REGISTER DmaWriteQFullCnt;
- T3_32BIT_REGISTER DmaHighPriorityWriteQFullCnt;
- T3_32BIT_REGISTER NoMoreReceiveBdCnt;
- T3_32BIT_REGISTER IfInDiscardsCnt;
- T3_32BIT_REGISTER IfInErrorsCnt;
- T3_32BIT_REGISTER RcvThresholdHitCnt;
-
- /* Another unused space. */
- LM_UINT8 Unused2[420];
-} T3_RCV_LIST_PLACEMENT, *PT3_RCV_LIST_PLACEMENT;
-
-
-
-/******************************************************************************/
-/* Receive Data and Receive BD Initiator Control. */
-/******************************************************************************/
-
-typedef struct {
- /* Mode. */
- T3_32BIT_REGISTER Mode;
- #define RCV_DATA_BD_IN_MODE_RESET BIT_0
- #define RCV_DATA_BD_IN_MODE_ENABLE BIT_1
- #define RCV_DATA_BD_IN_MODE_JUMBO_BD_NEEDED BIT_2
- #define RCV_DATA_BD_IN_MODE_FRAME_TOO_BIG BIT_3
- #define RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE BIT_4
-
- /* Status. */
- T3_32BIT_REGISTER Status;
- #define RCV_DATA_BD_IN_STATUS_JUMBO_BD_NEEDED BIT_2
- #define RCV_DATA_BD_IN_STATUS_FRAME_TOO_BIG BIT_3
- #define RCV_DATA_BD_IN_STATUS_INVALID_RING_SIZE BIT_4
-
- /* Split frame minium size. */
- T3_32BIT_REGISTER SplitFrameMinSize;
-
- /* Unused space. */
- LM_UINT8 Unused1[0x2440-0x240c];
-
- /* Receive RCBs. */
- T3_RCB JumboRcvRcb;
- T3_RCB StdRcvRcb;
- T3_RCB MiniRcvRcb;
-
- /* Receive Data and Receive BD Ring Initiator Local NIC Receive */
- /* BD Consumber Index. */
- T3_32BIT_REGISTER NicJumboConIdx;
- T3_32BIT_REGISTER NicStdConIdx;
- T3_32BIT_REGISTER NicMiniConIdx;
-
- /* Unused space. */
- LM_UINT8 Unused2[4];
-
- /* Receive Data and Receive BD Initiator Local Receive Return ProdIdx. */
- T3_32BIT_REGISTER RcvDataBdProdIdx[16];
-
- /* Receive Data and Receive BD Initiator Hardware Diagnostic. */
- T3_32BIT_REGISTER HwDiag;
-
- /* Unused space. */
- LM_UINT8 Unused3[828];
-} T3_RCV_DATA_BD_INITIATOR, *PT3_RCV_DATA_BD_INITIATOR;
-
-
-
-/******************************************************************************/
-/* Receive Data Completion Control Registes. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define RCV_DATA_COMP_MODE_RESET BIT_0
- #define RCV_DATA_COMP_MODE_ENABLE BIT_1
- #define RCV_DATA_COMP_MODE_ATTN_ENABLE BIT_2
-
- /* Unused spaced. */
- LM_UINT8 Unused[1020];
-} T3_RCV_DATA_COMPLETION, *PT3_RCV_DATA_COMPLETION;
-
-
-
-/******************************************************************************/
-/* Receive BD Initiator Control. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define RCV_BD_IN_MODE_RESET BIT_0
- #define RCV_BD_IN_MODE_ENABLE BIT_1
- #define RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE BIT_2
-
- T3_32BIT_REGISTER Status;
- #define RCV_BD_IN_STATUS_BD_IN_DIABLED_RCB_ATTN BIT_2
-
- T3_32BIT_REGISTER NicJumboRcvProdIdx;
- T3_32BIT_REGISTER NicStdRcvProdIdx;
- T3_32BIT_REGISTER NicMiniRcvProdIdx;
-
- T3_32BIT_REGISTER MiniRcvThreshold;
- T3_32BIT_REGISTER StdRcvThreshold;
- T3_32BIT_REGISTER JumboRcvThreshold;
-
- /* Unused space. */
- LM_UINT8 Unused[992];
-} T3_RCV_BD_INITIATOR, *PT3_RCV_BD_INITIATOR;
-
-
-
-/******************************************************************************/
-/* Receive BD Completion Control Registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define RCV_BD_COMP_MODE_RESET BIT_0
- #define RCV_BD_COMP_MODE_ENABLE BIT_1
- #define RCV_BD_COMP_MODE_ATTN_ENABLE BIT_2
-
- T3_32BIT_REGISTER Status;
- #define RCV_BD_COMP_STATUS_ERROR_ATTN BIT_2
-
- T3_32BIT_REGISTER NicJumboRcvBdProdIdx;
- T3_32BIT_REGISTER NicStdRcvBdProdIdx;
- T3_32BIT_REGISTER NicMiniRcvBdProdIdx;
-
- /* Unused space. */
- LM_UINT8 Unused[1004];
-} T3_RCV_BD_COMPLETION, *PT3_RCV_BD_COMPLETION;
-
-
-
-/******************************************************************************/
-/* Receive list selector control register. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define RCV_LIST_SEL_MODE_RESET BIT_0
- #define RCV_LIST_SEL_MODE_ENABLE BIT_1
- #define RCV_LIST_SEL_MODE_ATTN_ENABLE BIT_2
-
- T3_32BIT_REGISTER Status;
- #define RCV_LIST_SEL_STATUS_ERROR_ATTN BIT_2
-
- /* Unused space. */
- LM_UINT8 Unused[1016];
-} T3_RCV_LIST_SELECTOR, *PT3_RCV_LIST_SELECTOR;
-
-
-
-/******************************************************************************/
-/* Mbuf cluster free registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
-#define MBUF_CLUSTER_FREE_MODE_RESET BIT_0
-#define MBUF_CLUSTER_FREE_MODE_ENABLE BIT_1
-
- T3_32BIT_REGISTER Status;
-
- /* Unused space. */
- LM_UINT8 Unused[1016];
-} T3_MBUF_CLUSTER_FREE, *PT3_MBUF_CLUSTER_FREE;
-
-
-
-/******************************************************************************/
-/* Host coalescing control registers. */
-/******************************************************************************/
-
-typedef struct {
- /* Mode. */
- T3_32BIT_REGISTER Mode;
- #define HOST_COALESCE_RESET BIT_0
- #define HOST_COALESCE_ENABLE BIT_1
- #define HOST_COALESCE_ATTN BIT_2
- #define HOST_COALESCE_NOW BIT_3
- #define HOST_COALESCE_FULL_STATUS_MODE BIT_NONE
- #define HOST_COALESCE_64_BYTE_STATUS_MODE BIT_7
- #define HOST_COALESCE_32_BYTE_STATUS_MODE BIT_8
- #define HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT BIT_9
- #define HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT BIT_10
- #define HOST_COALESCE_NO_INT_ON_COALESCE_NOW_MODE BIT_11
- #define HOST_COALESCE_NO_INT_ON_FORCE_DMAD_MODE BIT_12
-
- /* Status. */
- T3_32BIT_REGISTER Status;
- #define HOST_COALESCE_ERROR_ATTN BIT_2
-
- /* Receive coalescing ticks. */
- T3_32BIT_REGISTER RxCoalescingTicks;
-
- /* Send coalescing ticks. */
- T3_32BIT_REGISTER TxCoalescingTicks;
-
- /* Receive max coalesced frames. */
- T3_32BIT_REGISTER RxMaxCoalescedFrames;
-
- /* Send max coalesced frames. */
- T3_32BIT_REGISTER TxMaxCoalescedFrames;
-
- /* Receive coalescing ticks during interrupt. */
- T3_32BIT_REGISTER RxCoalescedTickDuringInt;
-
- /* Send coalescing ticks during interrupt. */
- T3_32BIT_REGISTER TxCoalescedTickDuringInt;
-
- /* Receive max coalesced frames during interrupt. */
- T3_32BIT_REGISTER RxMaxCoalescedFramesDuringInt;
-
- /* Send max coalesced frames during interrupt. */
- T3_32BIT_REGISTER TxMaxCoalescedFramesDuringInt;
-
- /* Statistics tick. */
- T3_32BIT_REGISTER StatsCoalescingTicks;
-
- /* Unused space. */
- LM_UINT8 Unused2[4];
-
- /* Statistics host address. */
- T3_64BIT_REGISTER StatsBlkHostAddr;
-
- /* Status block host address.*/
- T3_64BIT_REGISTER StatusBlkHostAddr;
-
- /* Statistics NIC address. */
- T3_32BIT_REGISTER StatsBlkNicAddr;
-
- /* Statust block NIC address. */
- T3_32BIT_REGISTER StatusBlkNicAddr;
-
- /* Flow attention registers. */
- T3_32BIT_REGISTER FlowAttn;
-
- /* Unused space. */
- LM_UINT8 Unused3[4];
-
- T3_32BIT_REGISTER NicJumboRcvBdConIdx;
- T3_32BIT_REGISTER NicStdRcvBdConIdx;
- T3_32BIT_REGISTER NicMiniRcvBdConIdx;
-
- /* Unused space. */
- LM_UINT8 Unused4[36];
-
- T3_32BIT_REGISTER NicRetProdIdx[16];
- T3_32BIT_REGISTER NicSndBdConIdx[16];
-
- /* Unused space. */
- LM_UINT8 Unused5[768];
-} T3_HOST_COALESCING, *PT3_HOST_COALESCING;
-
-
-
-/******************************************************************************/
-/* Memory arbiter registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
-#define T3_MEM_ARBITER_MODE_RESET BIT_0
-#define T3_MEM_ARBITER_MODE_ENABLE BIT_1
-
- T3_32BIT_REGISTER Status;
-
- T3_32BIT_REGISTER ArbTrapAddrLow;
- T3_32BIT_REGISTER ArbTrapAddrHigh;
-
- /* Unused space. */
- LM_UINT8 Unused[1008];
-} T3_MEM_ARBITER, *PT3_MEM_ARBITER;
-
-
-
-/******************************************************************************/
-/* Buffer manager control register. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define BUFMGR_MODE_RESET BIT_0
- #define BUFMGR_MODE_ENABLE BIT_1
- #define BUFMGR_MODE_ATTN_ENABLE BIT_2
- #define BUFMGR_MODE_BM_TEST BIT_3
- #define BUFMGR_MODE_MBUF_LOW_ATTN_ENABLE BIT_4
-
- T3_32BIT_REGISTER Status;
- #define BUFMGR_STATUS_ERROR BIT_2
- #define BUFMGR_STATUS_MBUF_LOW BIT_4
-
- T3_32BIT_REGISTER MbufPoolAddr;
- T3_32BIT_REGISTER MbufPoolSize;
- T3_32BIT_REGISTER MbufReadDmaLowWaterMark;
- T3_32BIT_REGISTER MbufMacRxLowWaterMark;
- T3_32BIT_REGISTER MbufHighWaterMark;
-
- T3_32BIT_REGISTER RxCpuMbufAllocReq;
- #define BUFMGR_MBUF_ALLOC_BIT BIT_31
- T3_32BIT_REGISTER RxCpuMbufAllocResp;
- T3_32BIT_REGISTER TxCpuMbufAllocReq;
- T3_32BIT_REGISTER TxCpuMbufAllocResp;
-
- T3_32BIT_REGISTER DmaDescPoolAddr;
- T3_32BIT_REGISTER DmaDescPoolSize;
- T3_32BIT_REGISTER DmaLowWaterMark;
- T3_32BIT_REGISTER DmaHighWaterMark;
-
- T3_32BIT_REGISTER RxCpuDmaAllocReq;
- T3_32BIT_REGISTER RxCpuDmaAllocResp;
- T3_32BIT_REGISTER TxCpuDmaAllocReq;
- T3_32BIT_REGISTER TxCpuDmaAllocResp;
-
- T3_32BIT_REGISTER Hwdiag[3];
-
- /* Unused space. */
- LM_UINT8 Unused[936];
-} T3_BUFFER_MANAGER, *PT3_BUFFER_MANAGER;
-
-
-
-/******************************************************************************/
-/* Read DMA control registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define DMA_READ_MODE_RESET BIT_0
- #define DMA_READ_MODE_ENABLE BIT_1
- #define DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE BIT_2
- #define DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE BIT_3
- #define DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE BIT_4
- #define DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE BIT_5
- #define DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE BIT_6
- #define DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE BIT_7
- #define DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE BIT_8
- #define DMA_READ_MODE_LONG_READ_ATTN_ENABLE BIT_9
- #define DMA_READ_MODE_MULTI_SPLIT_ENABLE BIT_11
- #define DMA_READ_MODE_MULTI_SPLIT_RESET BIT_12
- #define DMA_READ_MODE_FIFO_SIZE_128 BIT_17
- #define DMA_READ_MODE_FIFO_LONG_BURST (BIT_16 | BIT_17)
-
- T3_32BIT_REGISTER Status;
- #define DMA_READ_STATUS_TARGET_ABORT_ATTN BIT_2
- #define DMA_READ_STATUS_MASTER_ABORT_ATTN BIT_3
- #define DMA_READ_STATUS_PARITY_ERROR_ATTN BIT_4
- #define DMA_READ_STATUS_ADDR_OVERFLOW_ATTN BIT_5
- #define DMA_READ_STATUS_FIFO_OVERRUN_ATTN BIT_6
- #define DMA_READ_STATUS_FIFO_UNDERRUN_ATTN BIT_7
- #define DMA_READ_STATUS_FIFO_OVERREAD_ATTN BIT_8
- #define DMA_READ_STATUS_LONG_READ_ATTN BIT_9
-
- /* Unused space. */
- LM_UINT8 Unused[1016];
-} T3_DMA_READ, *PT3_DMA_READ;
-
-#if defined(PC)
-#undef PC
-#define PC pc
-#endif
-
-typedef union T3_CPU
-{
- struct
- {
- T3_32BIT_REGISTER mode;
- #define CPU_MODE_HALT BIT_10
- #define CPU_MODE_RESET BIT_0
- T3_32BIT_REGISTER state;
- T3_32BIT_REGISTER EventMask;
- T3_32BIT_REGISTER reserved1[4];
- T3_32BIT_REGISTER PC;
- T3_32BIT_REGISTER Instruction;
- T3_32BIT_REGISTER SpadUnderflow;
- T3_32BIT_REGISTER WatchdogClear;
- T3_32BIT_REGISTER WatchdogVector;
- T3_32BIT_REGISTER WatchdogSavedPC;
- T3_32BIT_REGISTER HardwareBp;
- T3_32BIT_REGISTER reserved2[3];
- T3_32BIT_REGISTER WatchdogSavedState;
- T3_32BIT_REGISTER LastBrchAddr;
- T3_32BIT_REGISTER SpadUnderflowSet;
- T3_32BIT_REGISTER reserved3[(0x200-0x50)/4];
- T3_32BIT_REGISTER Regs[32];
- T3_32BIT_REGISTER reserved4[(0x400-0x280)/4];
- }reg;
-}T3_CPU, *PT3_CPU;
-
-/******************************************************************************/
-/* Write DMA control registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define DMA_WRITE_MODE_RESET BIT_0
- #define DMA_WRITE_MODE_ENABLE BIT_1
- #define DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE BIT_2
- #define DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE BIT_3
- #define DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE BIT_4
- #define DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE BIT_5
- #define DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE BIT_6
- #define DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE BIT_7
- #define DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE BIT_8
- #define DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE BIT_9
- #define DMA_WRITE_MODE_RECEIVE_ACCELERATE BIT_10
-
- T3_32BIT_REGISTER Status;
- #define DMA_WRITE_STATUS_TARGET_ABORT_ATTN BIT_2
- #define DMA_WRITE_STATUS_MASTER_ABORT_ATTN BIT_3
- #define DMA_WRITE_STATUS_PARITY_ERROR_ATTN BIT_4
- #define DMA_WRITE_STATUS_ADDR_OVERFLOW_ATTN BIT_5
- #define DMA_WRITE_STATUS_FIFO_OVERRUN_ATTN BIT_6
- #define DMA_WRITE_STATUS_FIFO_UNDERRUN_ATTN BIT_7
- #define DMA_WRITE_STATUS_FIFO_OVERREAD_ATTN BIT_8
- #define DMA_WRITE_STATUS_LONG_READ_ATTN BIT_9
-
- /* Unused space. */
- LM_UINT8 Unused[1016];
-} T3_DMA_WRITE, *PT3_DMA_WRITE;
-
-
-
-/******************************************************************************/
-/* Mailbox registers. */
-/******************************************************************************/
-
-typedef struct {
- /* Interrupt mailbox registers. */
- T3_64BIT_REGISTER Interrupt[4];
-
- /* General mailbox registers. */
- T3_64BIT_REGISTER General[8];
-
- /* Reload statistics mailbox. */
- T3_64BIT_REGISTER ReloadStat;
-
- /* Receive BD ring producer index registers. */
- T3_64BIT_REGISTER RcvStdProdIdx;
- T3_64BIT_REGISTER RcvJumboProdIdx;
- T3_64BIT_REGISTER RcvMiniProdIdx;
-
- /* Receive return ring consumer index registers. */
- T3_64BIT_REGISTER RcvRetConIdx[16];
-
- /* Send BD ring host producer index registers. */
- T3_64BIT_REGISTER SendHostProdIdx[16];
-
- /* Send BD ring nic producer index registers. */
- T3_64BIT_REGISTER SendNicProdIdx[16];
-}T3_MAILBOX, *PT3_MAILBOX;
-
-typedef struct {
- T3_MAILBOX Mailbox;
-
- /* Priority mailbox registers. */
- T3_32BIT_REGISTER HighPriorityEventVector;
- T3_32BIT_REGISTER HighPriorityEventMask;
- T3_32BIT_REGISTER LowPriorityEventVector;
- T3_32BIT_REGISTER LowPriorityEventMask;
-
- /* Unused space. */
- LM_UINT8 Unused[496];
-} T3_GRC_MAILBOX, *PT3_GRC_MAILBOX;
-
-
-/******************************************************************************/
-/* Flow through queues. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Reset;
-
- LM_UINT8 Unused[12];
-
- T3_32BIT_REGISTER DmaNormalReadFtqCtrl;
- T3_32BIT_REGISTER DmaNormalReadFtqFullCnt;
- T3_32BIT_REGISTER DmaNormalReadFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER DmaNormalReadFtqFifoWritePeek;
-
- T3_32BIT_REGISTER DmaHighReadFtqCtrl;
- T3_32BIT_REGISTER DmaHighReadFtqFullCnt;
- T3_32BIT_REGISTER DmaHighReadFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER DmaHighReadFtqFifoWritePeek;
-
- T3_32BIT_REGISTER DmaCompDiscardFtqCtrl;
- T3_32BIT_REGISTER DmaCompDiscardFtqFullCnt;
- T3_32BIT_REGISTER DmaCompDiscardFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER DmaCompDiscardFtqFifoWritePeek;
-
- T3_32BIT_REGISTER SendBdCompFtqCtrl;
- T3_32BIT_REGISTER SendBdCompFtqFullCnt;
- T3_32BIT_REGISTER SendBdCompFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER SendBdCompFtqFifoWritePeek;
-
- T3_32BIT_REGISTER SendDataInitiatorFtqCtrl;
- T3_32BIT_REGISTER SendDataInitiatorFtqFullCnt;
- T3_32BIT_REGISTER SendDataInitiatorFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER SendDataInitiatorFtqFifoWritePeek;
-
- T3_32BIT_REGISTER DmaNormalWriteFtqCtrl;
- T3_32BIT_REGISTER DmaNormalWriteFtqFullCnt;
- T3_32BIT_REGISTER DmaNormalWriteFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER DmaNormalWriteFtqFifoWritePeek;
-
- T3_32BIT_REGISTER DmaHighWriteFtqCtrl;
- T3_32BIT_REGISTER DmaHighWriteFtqFullCnt;
- T3_32BIT_REGISTER DmaHighWriteFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER DmaHighWriteFtqFifoWritePeek;
-
- T3_32BIT_REGISTER SwType1FtqCtrl;
- T3_32BIT_REGISTER SwType1FtqFullCnt;
- T3_32BIT_REGISTER SwType1FtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER SwType1FtqFifoWritePeek;
-
- T3_32BIT_REGISTER SendDataCompFtqCtrl;
- T3_32BIT_REGISTER SendDataCompFtqFullCnt;
- T3_32BIT_REGISTER SendDataCompFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER SendDataCompFtqFifoWritePeek;
-
- T3_32BIT_REGISTER HostCoalesceFtqCtrl;
- T3_32BIT_REGISTER HostCoalesceFtqFullCnt;
- T3_32BIT_REGISTER HostCoalesceFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER HostCoalesceFtqFifoWritePeek;
-
- T3_32BIT_REGISTER MacTxFtqCtrl;
- T3_32BIT_REGISTER MacTxFtqFullCnt;
- T3_32BIT_REGISTER MacTxFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER MacTxFtqFifoWritePeek;
-
- T3_32BIT_REGISTER MbufClustFreeFtqCtrl;
- T3_32BIT_REGISTER MbufClustFreeFtqFullCnt;
- T3_32BIT_REGISTER MbufClustFreeFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER MbufClustFreeFtqFifoWritePeek;
-
- T3_32BIT_REGISTER RcvBdCompFtqCtrl;
- T3_32BIT_REGISTER RcvBdCompFtqFullCnt;
- T3_32BIT_REGISTER RcvBdCompFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER RcvBdCompFtqFifoWritePeek;
-
- T3_32BIT_REGISTER RcvListPlmtFtqCtrl;
- T3_32BIT_REGISTER RcvListPlmtFtqFullCnt;
- T3_32BIT_REGISTER RcvListPlmtFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER RcvListPlmtFtqFifoWritePeek;
-
- T3_32BIT_REGISTER RcvDataBdInitiatorFtqCtrl;
- T3_32BIT_REGISTER RcvDataBdInitiatorFtqFullCnt;
- T3_32BIT_REGISTER RcvDataBdInitiatorFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER RcvDataBdInitiatorFtqFifoWritePeek;
-
- T3_32BIT_REGISTER RcvDataCompFtqCtrl;
- T3_32BIT_REGISTER RcvDataCompFtqFullCnt;
- T3_32BIT_REGISTER RcvDataCompFtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER RcvDataCompFtqFifoWritePeek;
-
- T3_32BIT_REGISTER SwType2FtqCtrl;
- T3_32BIT_REGISTER SwType2FtqFullCnt;
- T3_32BIT_REGISTER SwType2FtqFifoEnqueueDequeue;
- T3_32BIT_REGISTER SwType2FtqFifoWritePeek;
-
- /* Unused space. */
- LM_UINT8 Unused2[736];
-} T3_FTQ, *PT3_FTQ;
-
-
-
-/******************************************************************************/
-/* Message signaled interrupt registers. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
-#define MSI_MODE_RESET BIT_0
-#define MSI_MODE_ENABLE BIT_1
- T3_32BIT_REGISTER Status;
-
- T3_32BIT_REGISTER MsiFifoAccess;
-
- /* Unused space. */
- LM_UINT8 Unused[1012];
-} T3_MSG_SIGNALED_INT, *PT3_MSG_SIGNALED_INT;
-
-
-
-/******************************************************************************/
-/* DMA Completion registes. */
-/******************************************************************************/
-
-typedef struct {
- T3_32BIT_REGISTER Mode;
- #define DMA_COMP_MODE_RESET BIT_0
- #define DMA_COMP_MODE_ENABLE BIT_1
-
- /* Unused space. */
- LM_UINT8 Unused[1020];
-} T3_DMA_COMPLETION, *PT3_DMA_COMPLETION;
-
-
-
-/******************************************************************************/
-/* GRC registers. */
-/******************************************************************************/
-
-typedef struct {
- /* Mode control register. */
- T3_32BIT_REGISTER Mode;
- #define GRC_MODE_UPDATE_ON_COALESCING BIT_0
- #define GRC_MODE_BYTE_SWAP_NON_FRAME_DATA BIT_1
- #define GRC_MODE_WORD_SWAP_NON_FRAME_DATA BIT_2
- #define GRC_MODE_BYTE_SWAP_DATA BIT_4
- #define GRC_MODE_WORD_SWAP_DATA BIT_5
- #define GRC_MODE_SPLIT_HEADER_MODE BIT_8
- #define GRC_MODE_NO_FRAME_CRACKING BIT_9
- #define GRC_MODE_INCLUDE_CRC BIT_10
- #define GRC_MODE_ALLOW_BAD_FRAMES BIT_11
- #define GRC_MODE_NO_INTERRUPT_ON_SENDS BIT_13
- #define GRC_MODE_NO_INTERRUPT_ON_RECEIVE BIT_14
- #define GRC_MODE_FORCE_32BIT_PCI_BUS_MODE BIT_15
- #define GRC_MODE_HOST_STACK_UP BIT_16
- #define GRC_MODE_HOST_SEND_BDS BIT_17
- #define GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM BIT_20
- #define GRC_MODE_NVRAM_WRITE_ENABLE BIT_21
- #define GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM BIT_23
- #define GRC_MODE_INT_ON_TX_CPU_ATTN BIT_24
- #define GRC_MODE_INT_ON_RX_CPU_ATTN BIT_25
- #define GRC_MODE_INT_ON_MAC_ATTN BIT_26
- #define GRC_MODE_INT_ON_DMA_ATTN BIT_27
- #define GRC_MODE_INT_ON_FLOW_ATTN BIT_28
- #define GRC_MODE_4X_NIC_BASED_SEND_RINGS BIT_29
- #define GRC_MODE_MULTICAST_FRAME_ENABLE BIT_30
-
- /* Misc configuration register. */
- T3_32BIT_REGISTER MiscCfg;
- #define GRC_MISC_CFG_CORE_CLOCK_RESET BIT_0
- #define GRC_MISC_PRESCALAR_TIMER_MASK 0xfe
- #define GRC_MISC_BD_ID_MASK 0x0001e000
- #define GRC_MISC_BD_ID_5700 0x0001e000
- #define GRC_MISC_BD_ID_5701 0x00000000
- #define GRC_MISC_BD_ID_5703 0x00000000
- #define GRC_MISC_BD_ID_5703S 0x00002000
- #define GRC_MISC_BD_ID_5702FE 0x00004000
- #define GRC_MISC_BD_ID_5704 0x00000000
- #define GRC_MISC_BD_ID_5704CIOBE 0x00004000
- #define GRC_MISC_BD_ID_5788 0x00010000
- #define GRC_MISC_BD_ID_5788M 0x00018000
- #define GRC_MISC_GPHY_KEEP_POWER_DURING_RESET BIT_26
-
- /* Miscellaneous local control register. */
- T3_32BIT_REGISTER LocalCtrl;
- #define GRC_MISC_LOCAL_CTRL_INT_ACTIVE BIT_0
- #define GRC_MISC_LOCAL_CTRL_CLEAR_INT BIT_1
- #define GRC_MISC_LOCAL_CTRL_SET_INT BIT_2
- #define GRC_MISC_LOCAL_CTRL_INT_ON_ATTN BIT_3
-
- #define GRC_MISC_LOCAL_CTRL_GPIO_INPUT3 BIT_5
- #define GRC_MISC_LOCAL_CTRL_GPIO_OE3 BIT_6
- #define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT3 BIT_7
-
- #define GRC_MISC_LOCAL_CTRL_GPIO_INPUT0 BIT_8
- #define GRC_MISC_LOCAL_CTRL_GPIO_INPUT1 BIT_9
- #define GRC_MISC_LOCAL_CTRL_GPIO_INPUT2 BIT_10
- #define GRC_MISC_LOCAL_CTRL_GPIO_OE0 BIT_11
- #define GRC_MISC_LOCAL_CTRL_GPIO_OE1 BIT_12
- #define GRC_MISC_LOCAL_CTRL_GPIO_OE2 BIT_13
- #define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 BIT_14
- #define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 BIT_15
- #define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2 BIT_16
- #define GRC_MISC_LOCAL_CTRL_ENABLE_EXT_MEMORY BIT_17
- #define GRC_MISC_LOCAL_CTRL_BANK_SELECT BIT_21
- #define GRC_MISC_LOCAL_CTRL_SSRAM_TYPE BIT_22
-
- #define GRC_MISC_MEMSIZE_256K 0
- #define GRC_MISC_MEMSIZE_512K (1 << 18)
- #define GRC_MISC_MEMSIZE_1024K (2 << 18)
- #define GRC_MISC_MEMSIZE_2048K (3 << 18)
- #define GRC_MISC_MEMSIZE_4096K (4 << 18)
- #define GRC_MISC_MEMSIZE_8192K (5 << 18)
- #define GRC_MISC_MEMSIZE_16M (6 << 18)
- #define GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM BIT_24
-
-
- T3_32BIT_REGISTER Timer;
-
- T3_32BIT_REGISTER RxCpuEvent;
- T3_32BIT_REGISTER RxTimerRef;
- T3_32BIT_REGISTER RxCpuSemaphore;
- T3_32BIT_REGISTER RemoteRxCpuAttn;
-
- T3_32BIT_REGISTER TxCpuEvent;
- T3_32BIT_REGISTER TxTimerRef;
- T3_32BIT_REGISTER TxCpuSemaphore;
- T3_32BIT_REGISTER RemoteTxCpuAttn;
-
- T3_64BIT_REGISTER MemoryPowerUp;
-
- T3_32BIT_REGISTER EepromAddr;
- #define SEEPROM_ADDR_WRITE 0
- #define SEEPROM_ADDR_READ (1 << 31)
- #define SEEPROM_ADDR_RW_MASK 0x80000000
- #define SEEPROM_ADDR_COMPLETE (1 << 30)
- #define SEEPROM_ADDR_FSM_RESET (1 << 29)
- #define SEEPROM_ADDR_DEV_ID(x) (x << 26)
- #define SEEPROM_ADDR_DEV_ID_MASK 0x1c000000
- #define SEEPROM_ADDR_START (1 << 25)
- #define SEEPROM_ADDR_CLK_PERD(x) (x << 16)
- #define SEEPROM_ADDR_ADDRESS(x) (x & 0xfffc)
- #define SEEPROM_ADDR_ADDRESS_MASK 0x0000ffff
-
- #define SEEPROM_CLOCK_PERIOD 60
- #define SEEPROM_CHIP_SIZE (64 * 1024)
-
- T3_32BIT_REGISTER EepromData;
- T3_32BIT_REGISTER EepromCtrl;
-
- T3_32BIT_REGISTER MdiCtrl;
- T3_32BIT_REGISTER SepromDelay;
-
- /* Unused space. */
- LM_UINT8 Unused[948];
-} T3_GRC, *PT3_GRC;
-
-
-/******************************************************************************/
-/* NVRAM control registers. */
-/******************************************************************************/
-
-typedef struct
-{
- T3_32BIT_REGISTER Cmd;
- #define NVRAM_CMD_RESET BIT_0
- #define NVRAM_CMD_DONE BIT_3
- #define NVRAM_CMD_DO_IT BIT_4
- #define NVRAM_CMD_WR BIT_5
- #define NVRAM_CMD_RD BIT_NONE
- #define NVRAM_CMD_ERASE BIT_6
- #define NVRAM_CMD_FIRST BIT_7
- #define NVRAM_CMD_LAST BIT_8
- #define NVRAM_CMD_WRITE_ENABLE BIT_16
- #define NVRAM_CMD_WRITE_DISABLE BIT_17
- #define NVRAM_CMD_EN_WR_SR BIT_18
- #define NVRAM_CMD_DO_WR_SR BIT_19
-
- T3_32BIT_REGISTER Status;
- T3_32BIT_REGISTER WriteData;
-
- T3_32BIT_REGISTER Addr;
- #define NVRAM_ADDRESS_MASK 0xffffff
-
- T3_32BIT_REGISTER ReadData;
-
- /* Flash config 1 register. */
- T3_32BIT_REGISTER Config1;
- #define FLASH_INTERFACE_ENABLE BIT_0
- #define FLASH_SSRAM_BUFFERED_MODE BIT_1
- #define FLASH_PASS_THRU_MODE BIT_2
- #define FLASH_BIT_BANG_MODE BIT_3
- #define FLASH_STATUS_BITS_MASK (BIT_4 | BIT_5 | BIT_6)
- #define FLASH_SIZE BIT_25
- #define FLASH_COMPAT_BYPASS BIT_31
- #define FLASH_VENDOR_MASK (BIT_25 | BIT_24 | BIT_1 | BIT_0)
- #define FLASH_VENDOR_ATMEL_EEPROM BIT_25
- #define FLASH_VENDOR_ATMEL_FLASH_BUFFERED (BIT_25 | BIT_1 | BIT_0)
- #define FLASH_VENDOR_ATMEL_FLASH_UNBUFFERED (BIT_1 | BIT_0)
- #define FLASH_VENDOR_ST (BIT_25 | BIT_24 | BIT_0)
- #define FLASH_VENDOR_SAIFUN (BIT_24 | BIT_1 | BIT_0)
- #define FLASH_VENDOR_SST_SMALL BIT_0
- #define FLASH_VENDOR_SST_LARGE (BIT_25 | BIT_0)
-
- #define BUFFERED_FLASH (FLASH_INTERFACE_ENABLE | FLASH_SSRAM_BUFFERED_MODE)
-
- /* Buffered flash (Atmel: AT45DB011B) specific information */
- #define BUFFERED_FLASH_PAGE_POS 9
- #define BUFFERED_FLASH_BYTE_ADDR_MASK ((1<<BUFFERED_FLASH_PAGE_POS) - 1)
- #define BUFFERED_FLASH_PAGE_SIZE 264
- #define BUFFERED_FLASH_PHY_PAGE_SIZE 512
-
- /* Bleh! Definitions for Baxter. */
- #define FLASH_PART_5750_TYPEMASK \
- (BIT_25 | BIT_24 | BIT_1 | BIT_0)
-
- #define FLASH_PART_5752_TYPEMASK \
- (BIT_25 | BIT_24 | BIT_23 | BIT_22 | BIT_1 | BIT_0)
-
- #define FLASH_PART_5752_EEPROM_ATMEL_64K BIT_NONE
- #define FLASH_PART_5752_EEPROM_ATMEL_376K BIT_25
- #define FLASH_PART_5752_FLASH_ATMEL_AT45DB041 (BIT_25 | BIT_1 | BIT_0)
- #define FLASH_PART_5752_FLASH_ATMEL_AT25F512 (BIT_1 | BIT_0)
- #define FLASH_PART_5752_FLASH_SST_45VF010 (BIT_25 | BIT_0)
- #define FLASH_PART_5752_FLASH_SST_25F512 (BIT_0)
- #define FLASH_PART_5752_FLASH_ST_M25P10A (BIT_25 | BIT_24 | BIT_0)
- #define FLASH_PART_5752_FLASH_ST_M25P05A (BIT_24 | BIT_0)
- #define FLASH_PART_5752_FLASH_SAIFUN_SA25F010 (BIT_22)
- #define FLASH_PART_5752_FLASH_SAIFUN_SA25F020 (BIT_22 | BIT_1)
- #define FLASH_PART_5752_FLASH_SAIFUN_SA25F040 (BIT_22 | BIT_0)
- #define FLASH_PART_5752_FLASH_SST_25VF010 (BIT_24 | BIT_22)
- #define FLASH_PART_5752_FLASH_SST_25VF020 (BIT_24 | BIT_22 | BIT_1)
- #define FLASH_PART_5752_FLASH_SST_25VF040 (BIT_24 | BIT_22 | BIT_0)
- #define FLASH_PART_5752_FLASH_ST_M45PE10 (BIT_25 | BIT_22)
- #define FLASH_PART_5752_FLASH_ST_M45PE20 (BIT_25 | BIT_22 | BIT_1)
- #define FLASH_PART_5752_FLASH_ST_M45PE40 (BIT_25 | BIT_22 | BIT_0)
-
- #define FLASH_PART_5752_PAGEMASK \
- (BIT_30 | BIT_29 | BIT_28)
-
- #define FLASH_PART_5752_PAGE_SIZE_256B BIT_NONE
- #define FLASH_PART_5752_PAGE_SIZE_512B BIT_28
- #define FLASH_PART_5752_PAGE_SIZE_1K BIT_29
- #define FLASH_PART_5752_PAGE_SIZE_2K (BIT_29 | BIT_28)
- #define FLASH_PART_5752_PAGE_SIZE_4K BIT_30
- #define FLASH_PART_5752_PAGE_SIZE_264B (BIT_30 | BIT_28)
-
-
- T3_32BIT_REGISTER Config2;
- #define NVRAM_COMMAND_MASK 0x000000ff
- #define NVRAM_STATUS_COMMAND(x) ((x) << 16)
- #define NVRAM_ERASE_COMMAND(x) (x)
-
- T3_32BIT_REGISTER Config3;
- #define NVRAM_COMMAND_MASK 0x000000ff
- #define NVRAM_READ_COMMAND(x) ((x) << 24)
- #define NVRAM_WRITE_UNBUFFERED_COMMAND(x) ((x) << 8)
- #define NVRAM_WRITE_BUFFERED_COMMAND(x) ((x) << 16)
- #define NVRAM_RESET_COMMAND(x) (x)
-
- T3_32BIT_REGISTER SwArb;
- #define SW_ARB_REQ_SET0 BIT_0
- #define SW_ARB_REQ_SET1 BIT_1
- #define SW_ARB_REQ_SET2 BIT_2
- #define SW_ARB_REQ_SET3 BIT_3
- #define SW_ARB_REQ_CLR0 BIT_4
- #define SW_ARB_REQ_CLR1 BIT_5
- #define SW_ARB_REQ_CLR2 BIT_6
- #define SW_ARB_REQ_CLR3 BIT_7
- #define SW_ARB_GNT0 BIT_8
- #define SW_ARB_GNT1 BIT_9
- #define SW_ARB_GNT2 BIT_10
- #define SW_ARB_GNT3 BIT_11
- #define SW_ARB_REQ0 BIT_12
- #define SW_ARB_REQ1 BIT_13
- #define SW_ARB_REQ2 BIT_14
- #define SW_ARB_REQ3 BIT_15
-
- T3_32BIT_REGISTER NvmAccess;
- #define ACCESS_EN BIT_0
- #define ACCESS_WR_EN BIT_1
- #define NVRAM_ACCESS_ENABLE BIT_0
- #define NVRAM_ACCESS_WRITE_ENABLE BIT_1
-
- T3_32BIT_REGISTER Write1;
- #define NVRAM_WRITE1_WRENA_CMD(x) (x)
- #define NVRAM_WRITE1_WRDIS_CMD(x) ((x) << 8)
-
- T3_32BIT_REGISTER WatchTimer;
-
- T3_32BIT_REGISTER Config4;
-
- /* Unused space. */
- LM_UINT8 Unused[972];
-} T3_NVRAM, *PT3_NVRAM;
-
-
-/******************************************************************************/
-/* NIC's internal memory. */
-/******************************************************************************/
-
-typedef struct {
- /* Page zero for the internal CPUs. */
- LM_UINT8 PageZero[0x100]; /* 0x0000 */
-
- /* Send RCBs. */
- T3_RCB SendRcb[16]; /* 0x0100 */
-
- /* Receive Return RCBs. */
- T3_RCB RcvRetRcb[16]; /* 0x0200 */
-
- /* Statistics block. */
- T3_STATS_BLOCK StatsBlk; /* 0x0300 */
-
- /* Status block. */
- T3_STATUS_BLOCK StatusBlk; /* 0x0b00 */
-
- /* Reserved for software. */
- LM_UINT8 Reserved[1200]; /* 0x0b50 */
-
- /* Unmapped region. */
- LM_UINT8 Unmapped[4096]; /* 0x1000 */
-
- /* DMA descriptors. */
- LM_UINT8 DmaDesc[8192]; /* 0x2000 */
-
- /* Buffer descriptors. */
- LM_UINT8 BufferDesc[16384]; /* 0x4000 */
-} T3_FIRST_32K_SRAM, *PT3_FIRST_32K_SRAM;
-
-
-
-/******************************************************************************/
-/* Memory layout. */
-/******************************************************************************/
-
-typedef struct {
- /* PCI configuration registers. */
- T3_PCI_CONFIGURATION PciCfg;
-
- /* Unused. */
- LM_UINT8 Unused1[0x100]; /* 0x0100 */
-
- /* Mailbox . */
- T3_MAILBOX Mailbox; /* 0x0200 */
-
- /* MAC control registers. */
- T3_MAC_CONTROL MacCtrl; /* 0x0400 */
-
- /* Send data initiator control registers. */
- T3_SEND_DATA_INITIATOR SndDataIn; /* 0x0c00 */
-
- /* Send data completion Control registers. */
- T3_SEND_DATA_COMPLETION SndDataComp; /* 0x1000 */
-
- /* Send BD ring selector. */
- T3_SEND_BD_SELECTOR SndBdSel; /* 0x1400 */
-
- /* Send BD initiator control registers. */
- T3_SEND_BD_INITIATOR SndBdIn; /* 0x1800 */
-
- /* Send BD completion control registers. */
- T3_SEND_BD_COMPLETION SndBdComp; /* 0x1c00 */
-
- /* Receive list placement control registers. */
- T3_RCV_LIST_PLACEMENT RcvListPlmt; /* 0x2000 */
-
- /* Receive Data and Receive BD Initiator Control. */
- T3_RCV_DATA_BD_INITIATOR RcvDataBdIn; /* 0x2400 */
-
- /* Receive Data Completion Control */
- T3_RCV_DATA_COMPLETION RcvDataComp; /* 0x2800 */
-
- /* Receive BD Initiator Control Registers. */
- T3_RCV_BD_INITIATOR RcvBdIn; /* 0x2c00 */
-
- /* Receive BD Completion Control Registers. */
- T3_RCV_BD_COMPLETION RcvBdComp; /* 0x3000 */
-
- /* Receive list selector control registers. */
- T3_RCV_LIST_SELECTOR RcvListSel; /* 0x3400 */
-
- /* Mbuf cluster free registers. */
- T3_MBUF_CLUSTER_FREE MbufClusterFree; /* 0x3800 */
-
- /* Host coalescing control registers. */
- T3_HOST_COALESCING HostCoalesce; /* 0x3c00 */
-
- /* Memory arbiter control registers. */
- T3_MEM_ARBITER MemArbiter; /* 0x4000 */
-
- /* Buffer manger control registers. */
- T3_BUFFER_MANAGER BufMgr; /* 0x4400 */
-
- /* Read DMA control registers. */
- T3_DMA_READ DmaRead; /* 0x4800 */
-
- /* Write DMA control registers. */
- T3_DMA_WRITE DmaWrite; /* 0x4c00 */
-
- T3_CPU rxCpu; /* 0x5000 */
- T3_CPU txCpu; /* 0x5400 */
-
- /* Mailboxes. */
- T3_GRC_MAILBOX GrcMailbox; /* 0x5800 */
-
- /* Flow Through queues. */
- T3_FTQ Ftq; /* 0x5c00 */
-
- /* Message signaled interrupt registes. */
- T3_MSG_SIGNALED_INT Msi; /* 0x6000 */
-
- /* DMA completion registers. */
- T3_DMA_COMPLETION DmaComp; /* 0x6400 */
-
- /* GRC registers. */
- T3_GRC Grc; /* 0x6800 */
-
- /* Unused space. */
- LM_UINT8 Unused2[1024]; /* 0x6c00 */
-
- /* NVRAM registers. */
- T3_NVRAM Nvram; /* 0x7000 */
-
- /* Unused space. */
- LM_UINT8 Unused3[3072]; /* 0x7400 */
-
- /* The 32k memory window into the NIC's */
- /* internal memory. The memory window is */
- /* controlled by the Memory Window Base */
- /* Address register. This register is located */
- /* in the PCI configuration space. */
- union { /* 0x8000 */
- T3_FIRST_32K_SRAM First32k;
-
- /* Use the memory window base address register to determine the */
- /* MBUF segment. */
- LM_UINT32 Mbuf[32768/4];
- LM_UINT32 MemBlock32K[32768/4];
- } uIntMem;
-} T3_STD_MEM_MAP, *PT3_STD_MEM_MAP;
-
-
-/******************************************************************************/
-/* Adapter info. */
-/******************************************************************************/
-
-typedef struct
-{
- LM_UINT16 Svid;
- LM_UINT16 Ssid;
- LM_UINT32 PhyId;
- LM_UINT32 Serdes; /* 0 = copper PHY, 1 = Serdes */
-} LM_ADAPTER_INFO, *PLM_ADAPTER_INFO;
-
-
-/******************************************************************************/
-/* Flash info. */
-/******************************************************************************/
-
-typedef struct {
- LM_UINT8 jedecnum;
- LM_UINT8 romtype;
- #define ROM_TYPE_EEPROM 0x1
- #define ROM_TYPE_FLASH 0x2
- LM_BOOL buffered;
-
- LM_UINT32 chipsize;
- LM_UINT32 pagesize;
-} FLASHINFO;
-
-
-#define JEDEC_ATMEL 0x1f
-#define JEDEC_ST 0x20
-#define JEDEC_SAIFUN 0x4f
-#define JEDEC_SST 0xbf
-
-#define ATMEL_AT24C64_CHIP_SIZE (64 * 1024)
-#define ATMEL_AT24C64_PAGE_SIZE (32)
-#define ATMEL_AT24C64_PAGE_MASK (ATMEL_AT24C64_PAGE_SIZE - 1)
-
-#define ATMEL_AT24C512_CHIP_SIZE (512 * 1024)
-#define ATMEL_AT24C512_PAGE_SIZE (128)
-#define ATMEL_AT24C512_PAGE_MASK (ATMEL_AT24C512_PAGE_SIZE - 1)
-
-#define ATMEL_AT45DB0X1B_PAGE_POS 9
-#define ATMEL_AT45DB0X1B_PAGE_SIZE 264
-#define ATMEL_AT45DB0X1B_PAGE_MASK 0x1ff
-#define ATMEL_AT45DB0X1B_BUFFER_WRITE_CMD 0x83
-
-/* Currently unsupported flash type */
-#define ATMEL_AT25F512_PAGE_SIZE 256
-#define ATMEL_AT25F512_PAGE_MASK (ATMEL_AT25F512_PAGE_SIZE - 1)
-
-#define ST_M45PEX0_PAGE_SIZE 256
-#define ST_M45PEX0_PAGE_MASK (ST_M45PEX0_PAGE_SIZE - 1)
-#define ST_M45PEX0_READ_STATUS_CMD 0x05
-#define ST_M45PEX0_PAGE_ERASE_CMD 0xDB
-#define ST_M45PEX0_PAGE_PRGM_CMD 0x0A
-#define ST_M45PEX0_WRENA_CMD 0x06
-#define ST_M45PEX0_WRDIS_CMD 0x04
-
-#define SAIFUN_SA25F0XX_PAGE_SIZE 256
-#define SAIFUN_SA25F0XX_PAGE_MASK (SAIFUN_SA25F0XX_PAGE_SIZE - 1)
-#define SAIFUN_SA25F0XX_READ_STATUS_CMD 0x05
-#define SAIFUN_SA25F0XX_PAGE_ERASE_CMD 0x81
-#define SAIFUN_SA25F0XX_PAGE_WRITE_CMD 0x02
-#define SAIFUN_SA25F0XX_WRENA_CMD 0x06
-
-/* Currently unsupported flash type */
-#define SST_25VF0X0_PAGE_SIZE 4098
-#define SST_25VF0X0_PAGE_MASK (SST_25VF0X0_PAGE_SIZE - 1)
-
-
-/******************************************************************************/
-/* Packet queues. */
-/******************************************************************************/
-
-DECLARE_QUEUE_TYPE(LM_RX_PACKET_Q, MAX_RX_PACKET_DESC_COUNT);
-DECLARE_QUEUE_TYPE(LM_TX_PACKET_Q, MAX_TX_PACKET_DESC_COUNT);
-
-
-
-/******************************************************************************/
-/* Tx counters. */
-/******************************************************************************/
-
-typedef struct {
- LM_COUNTER TxPacketGoodCnt;
- LM_COUNTER TxBytesGoodCnt;
- LM_COUNTER TxPacketAbortedCnt;
- LM_COUNTER NoSendBdLeftCnt;
- LM_COUNTER NoMapRegisterLeftCnt;
- LM_COUNTER TooManyFragmentsCnt;
- LM_COUNTER NoTxPacketDescCnt;
-} LM_TX_COUNTERS, *PLM_TX_COUNTERS;
-
-
-
-/******************************************************************************/
-/* Rx counters. */
-/******************************************************************************/
-
-typedef struct {
- LM_COUNTER RxPacketGoodCnt;
- LM_COUNTER RxBytesGoodCnt;
- LM_COUNTER RxPacketErrCnt;
- LM_COUNTER RxErrCrcCnt;
- LM_COUNTER RxErrCollCnt;
- LM_COUNTER RxErrLinkLostCnt;
- LM_COUNTER RxErrPhyDecodeCnt;
- LM_COUNTER RxErrOddNibbleCnt;
- LM_COUNTER RxErrMacAbortCnt;
- LM_COUNTER RxErrShortPacketCnt;
- LM_COUNTER RxErrNoResourceCnt;
- LM_COUNTER RxErrLargePacketCnt;
-} LM_RX_COUNTERS, *PLM_RX_COUNTERS;
-
-
-
-/******************************************************************************/
-/* Receive producer rings. */
-/******************************************************************************/
-
-typedef enum {
- T3_UNKNOWN_RCV_PROD_RING = 0,
- T3_STD_RCV_PROD_RING = 1,
- T3_MINI_RCV_PROD_RING = 2,
- T3_JUMBO_RCV_PROD_RING = 3
-} T3_RCV_PROD_RING, *PT3_RCV_PROD_RING;
-
-
-
-/******************************************************************************/
-/* Packet descriptor. */
-/******************************************************************************/
-
-#define LM_PACKET_SIGNATURE_TX 0x6861766b
-#define LM_PACKET_SIGNATURE_RX 0x6b766168
-
-typedef struct _LM_PACKET {
- /* Set in LM. */
- LM_STATUS PacketStatus;
-
- /* Set in LM for Rx, in UM for Tx. */
- LM_UINT32 PacketSize;
-
- LM_UINT16 Flags;
-
- LM_UINT16 VlanTag;
-
- union {
- /* Send info. */
- struct {
- /* Set up by UM. */
- LM_UINT32 FragCount;
-
-#if INCLUDE_TCP_SEG_SUPPORT
- LM_UINT32 MaxSegmentSize;
-#endif
- } Tx;
-
- /* Receive info. */
- struct {
- /* This descriptor belongs to either Std, Mini, or Jumbo ring. */
- LM_UINT16 RcvProdRing;
- LM_UINT16 RcvRingProdIdx;
-
- /* Receive buffer size */
- LM_UINT32 RxBufferSize;
-
- /* Checksum information. */
- LM_UINT16 IpChecksum;
- LM_UINT16 TcpUdpChecksum;
-
- } Rx;
- } u;
-} LM_PACKET;
-
-
-
-/******************************************************************************/
-/* Tigon3 device block. */
-/******************************************************************************/
-
-typedef struct _LM_DEVICE_BLOCK {
- /* Memory view. */
- PT3_STD_MEM_MAP pMemView;
-
- /* Base address of the block of memory in which the LM_PACKET descriptors */
- /* are allocated from. */
- PLM_VOID pPacketDescBase;
-
- LM_UINT32 MiscHostCtrl;
- LM_UINT32 GrcLocalCtrl;
- LM_UINT32 DmaReadWriteCtrl;
- LM_UINT32 PciState;
- LM_UINT32 ClockCtrl;
- LM_UINT32 DmaReadFifoSize;
- LM_UINT32 GrcMode;
-
- LM_UINT32 PowerLevel;
-
- LM_UINT32 Flags;
-
- #define MINI_PCI_FLAG 0x1
- #define PCI_EXPRESS_FLAG 0x2
- #define BCM5788_FLAG 0x4
- #define FIBER_WOL_CAPABLE_FLAG 0x8
- #define WOL_LIMIT_10MBPS_FLAG 0x10
- #define ENABLE_MWI_FLAG 0x20
- #define USE_TAGGED_STATUS_FLAG 0x40
-
- /* NIC will not compute the pseudo header checksum. The driver or OS */
- /* must seed the checksum field with the pseudo checksum. */
- #define NO_TX_PSEUDO_HDR_CSUM_FLAG 0x80
-
- /* The receive checksum in the BD does not include the pseudo checksum. */
- /* The OS or the driver must calculate the pseudo checksum and add it to */
- /* the checksum in the BD. */
- #define NO_RX_PSEUDO_HDR_CSUM_FLAG 0x100
-
- #define ENABLE_PCIX_FIX_FLAG 0x200
-
- #define TX_4G_WORKAROUND_FLAG 0x400
- #define UNDI_FIX_FLAG 0x800
- #define FLUSH_POSTED_WRITE_FLAG 0x1000
- #define REG_RD_BACK_FLAG 0x2000
-
- /* Use NIC or Host based send BD. */
- #define NIC_SEND_BD_FLAG 0x4000
-
- /* Athlon fix. */
- #define DELAY_PCI_GRANT_FLAG 0x8000
-
- /* Enable OneDmaAtOnce */
- #define ONE_DMA_AT_ONCE_FLAG 0x10000
-
- /* Enable PCI-X multi split */
- #define MULTI_SPLIT_ENABLE_FLAG 0x20000
-
- #define RX_BD_LIMIT_64_FLAG 0x40000
-
- #define DMA_WR_MODE_RX_ACCELERATE_FLAG 0x80000
-
- /* write protect */
- #define EEPROM_WP_FLAG 0x100000
- #define FLASH_DETECTED_FLAG 0x200000
-
- #define DISABLE_D3HOT_FLAG 0x400000
-
- /* 5753 should not output gpio2 */
- #define GPIO2_DONOT_OUTPUT 0x800000
-
- #define USING_MSI_FLAG 0x1000000
- #define JUMBO_CAPABLE_FLAG 0x2000000
- #define PROTECTED_NVRAM_FLAG 0x4000000
- #define T3_HAS_TWO_CPUS 0x8000000
- #define HOST_COALESCING_BUG_FIX 0x10000000
-
- /* 5750 in BCM4785 */
- #define SB_CORE_FLAG 0x20000000
- /* 5750 in RGMII mode (BCM4785) */
- #define RGMII_MODE_FLAG 0x40000000
- /* connected to a ROBO switch */
- #define ROBO_SWITCH_FLAG 0x80000000
-
-#ifdef BCM_WL_EMULATOR
- LM_BOOL wl_emulate_rx;
- LM_BOOL wl_emulate_tx;
- void *wlc;
-#endif /*BCM_WL_EMULATOR*/
-
- /* Rx info */
- LM_UINT32 RxStdDescCnt;
- LM_UINT32 RxStdQueuedCnt;
- LM_UINT32 RxStdProdIdx;
-
- PT3_RCV_BD pRxStdBdVirt;
- LM_PHYSICAL_ADDRESS RxStdBdPhy;
-
- LM_UINT32 RxPacketDescCnt;
- LM_RX_PACKET_Q RxPacketFreeQ;
- LM_RX_PACKET_Q RxPacketReceivedQ;
-
- LM_PACKET *RxStdRing[T3_STD_RCV_RCB_ENTRY_COUNT];
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- LM_PACKET *RxJumboRing[T3_JUMBO_RCV_RCB_ENTRY_COUNT];
-#endif
-
- /* Receive info. */
- PT3_RCV_BD pRcvRetBdVirt;
- LM_PHYSICAL_ADDRESS RcvRetBdPhy;
- LM_UINT32 RcvRetConIdx;
- LM_UINT32 RcvRetRcbEntryCount;
- LM_UINT32 RcvRetRcbEntryCountMask;
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
- LM_UINT32 RxJumboDescCnt;
- LM_UINT32 RxJumboBufferSize;
- LM_UINT32 RxJumboQueuedCnt;
-
- LM_UINT32 RxJumboProdIdx;
-
- PT3_RCV_BD pRxJumboBdVirt;
- LM_PHYSICAL_ADDRESS RxJumboBdPhy;
-#endif /* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
- /* These values are used by the upper module to inform the protocol */
- /* of the maximum transmit/receive packet size. */
- LM_UINT32 TxMtu; /* Does not include CRC. */
- LM_UINT32 RxMtu; /* Does not include CRC. */
-
-#if INCLUDE_TCP_SEG_SUPPORT
- LM_UINT32 LargeSendMaxSize;
- LM_UINT32 LargeSendMinNumSeg;
-#endif
-
- /* We need to shadow the EMAC, Rx, Tx mode registers. With B0 silicon, */
- /* we may have problems reading any MAC registers in 10mb mode. */
- LM_UINT32 MacMode;
- LM_UINT32 RxMode;
- LM_UINT32 TxMode;
-
- /* MiMode register. */
- LM_UINT32 MiMode;
-
- /* Host coalesce mode register. */
- LM_UINT32 CoalesceMode;
-
- /* Send info. */
- LM_UINT32 TxPacketDescCnt;
-
- /* Tx info. */
- LM_TX_PACKET_Q TxPacketFreeQ;
- LM_TX_PACKET_Q TxPacketXmittedQ;
-
- /* Pointers to SendBd. */
- PT3_SND_BD pSendBdVirt;
- LM_PHYSICAL_ADDRESS SendBdPhy; /* Only valid for Host based Send BD. */
-
- /* Send producer and consumer indices. */
- LM_UINT32 SendProdIdx;
- LM_UINT32 SendConIdx;
-
- /* Number of BD left. */
- MM_ATOMIC_T SendBdLeft;
-
- T3_SND_BD ShadowSendBd[T3_SEND_RCB_ENTRY_COUNT];
- LM_PACKET *SendRing[T3_SEND_RCB_ENTRY_COUNT];
-
- /* Counters. */
- LM_RX_COUNTERS RxCounters;
- LM_TX_COUNTERS TxCounters;
-
- /* Host coalescing parameters. */
- LM_UINT32 RxCoalescingTicks;
- LM_UINT32 TxCoalescingTicks;
- LM_UINT32 RxMaxCoalescedFrames;
- LM_UINT32 TxMaxCoalescedFrames;
- LM_UINT32 StatsCoalescingTicks;
- LM_UINT32 RxCoalescingTicksDuringInt;
- LM_UINT32 TxCoalescingTicksDuringInt;
- LM_UINT32 RxMaxCoalescedFramesDuringInt;
- LM_UINT32 TxMaxCoalescedFramesDuringInt;
-
- /* DMA water marks. */
- LM_UINT32 DmaMbufLowMark;
- LM_UINT32 RxMacMbufLowMark;
- LM_UINT32 MbufHighMark;
-
- /* Status block. */
- PT3_STATUS_BLOCK pStatusBlkVirt;
- LM_PHYSICAL_ADDRESS StatusBlkPhy;
-
- /* Statistics block. */
- PT3_STATS_BLOCK pStatsBlkVirt;
- LM_PHYSICAL_ADDRESS StatsBlkPhy;
-
- /* Current receive mask. */
- LM_UINT32 ReceiveMask;
-
- /* Task offload capabilities. */
- LM_TASK_OFFLOAD TaskOffloadCap;
-
- /* Task offload selected. */
- LM_TASK_OFFLOAD TaskToOffload;
-
- /* Wake up capability. */
- LM_WAKE_UP_MODE WakeUpModeCap;
-
- /* Wake up capability. */
- LM_WAKE_UP_MODE WakeUpMode;
-
- /* Flow control. */
- LM_FLOW_CONTROL FlowControlCap;
- LM_FLOW_CONTROL FlowControl;
-
- /* interrupt status tag */
- LM_UINT32 LastTag;
-
- /* Current node address. */
- LM_UINT8 NodeAddress[8];
-
- /* The adapter's node address. */
- LM_UINT8 PermanentNodeAddress[8];
-
- /* Adapter info. */
- LM_UINT16 BusNum; // Init by the upper module.
- LM_UINT8 DevNum; // Init by the upper module.
- LM_UINT8 FunctNum; // Init by the upper module.
- LM_UINT16 PciVendorId;
- LM_UINT16 PciDeviceId;
- LM_UINT32 BondId;
- LM_UINT8 Irq;
- LM_UINT8 IntPin;
- LM_UINT8 CacheLineSize;
- LM_UINT8 PciRevId;
- LM_UINT32 PciCommandStatusWords;
- LM_UINT32 ChipRevId;
- LM_UINT16 SubsystemVendorId;
- LM_UINT16 SubsystemId;
- PLM_UINT8 pMappedMemBase;
-
- /* Saved PCI configuration registers for restoring after a reset. */
- LM_UINT32 SavedCacheLineReg;
-
- /* Phy info. */
- LM_UINT32 PhyAddr;
- LM_UINT32 PhyId;
-
- /* Requested phy settings. */
- LM_LINE_SPEED RequestedLineSpeed;
- LM_DUPLEX_MODE RequestedDuplexMode;
-
- /* Disable auto-negotiation. */
- LM_UINT32 DisableAutoNeg;
-
- LM_UINT32 AutoNegJustInited;
-
- /* Ways for the MAC to get link change interrupt. */
- LM_UINT32 PhyIntMode;
- #define T3_PHY_INT_MODE_AUTO 0
- #define T3_PHY_INT_MODE_MI_INTERRUPT 1
- #define T3_PHY_INT_MODE_LINK_READY 2
- #define T3_PHY_INT_MODE_AUTO_POLLING 3
-
- /* Ways to determine link change status. */
- LM_UINT32 LinkChngMode;
- #define T3_LINK_CHNG_MODE_AUTO 0
- #define T3_LINK_CHNG_MODE_USE_STATUS_REG 1
- #define T3_LINK_CHNG_MODE_USE_STATUS_BLOCK 2
-
- LM_UINT32 LedCtrl;
-
- /* WOL Speed */
- LM_UINT32 WolSpeed;
- #define WOL_SPEED_10MB 1
- #define WOL_SPEED_100MB 2
-
- LM_UINT32 PhyFlags;
- #define PHY_RESET_ON_INIT 0x01
- #define PHY_RESET_ON_LINKDOWN 0x02
- #define PHY_ADC_FIX 0x04
- #define PHY_CHECK_TAPS_AFTER_RESET 0x08
- #define PHY_5704_A0_FIX 0x10
- #define PHY_ETHERNET_WIRESPEED 0x20
- #define PHY_5705_5750_FIX 0x40
- #define PHY_NO_GIGABIT 0x80
- #define PHY_CAPACITIVE_COUPLING 0x100
- #define PHY_IS_FIBER 0x200
- #define PHY_FIBER_FALLBACK 0x400
-
-
- LM_UINT32 RestoreOnWakeUp;
- LM_LINE_SPEED WakeUpRequestedLineSpeed;
- LM_DUPLEX_MODE WakeUpRequestedDuplexMode;
- LM_UINT32 WakeUpDisableAutoNeg;
-
- /* Current phy settings. */
- LM_LINE_SPEED LineSpeed;
- LM_LINE_SPEED OldLineSpeed;
- LM_DUPLEX_MODE DuplexMode;
- LM_STATUS LinkStatus;
- LM_UINT32 advertising;
- LM_UINT32 advertising1000;
-
- LM_UINT32 LoopBackMode;
-
-#define LM_MAC_LOOP_BACK_MODE 1
-#define LM_PHY_LOOP_BACK_MODE 2
-#define LM_EXT_LOOP_BACK_MODE 3
-
- LM_LINE_SPEED SavedRequestedLineSpeed;
- LM_DUPLEX_MODE SavedRequestedDuplexMode;
- LM_UINT32 SavedDisableAutoNeg;
-
- LM_UINT32 MulticastHash[4];
-
- LM_UINT32 AsfFlags;
-
-#define ASF_ENABLED 1
-#define ASF_NEW_HANDSHAKE 2 /* if set, this bit implies ASF enabled as well */
-
- /* Split Mode flags */
- LM_UINT32 SplitModeMaxReq;
-
- #define SPLIT_MODE_5704_MAX_REQ 3
-
- /* Init flag. */
- LM_BOOL InitDone;
-
- /* Shutdown flag. Set by the upper module. */
- LM_BOOL ShuttingDown;
-
- /* Flag to determine whether to call LM_QueueRxPackets or not in */
- /* LM_ResetAdapter routine. */
- LM_BOOL QueueRxPackets;
- LM_BOOL QueueAgain;
-
- LM_UINT32 MbufBase;
- LM_UINT32 MbufSize;
-
- LM_UINT32 NvramSize;
-
-#ifdef INCLUDE_TBI_SUPPORT
- /* Autoneg state info. */
- AN_STATE_INFO AnInfo;
-
- LM_UINT32 TbiFlags;
- /* set if we have a SERDES PHY. */
- #define ENABLE_TBI_FLAG 0x1
- #define TBI_POLLING_INTR_FLAG 0x2
- #define TBI_PURE_POLLING_FLAG 0x4
- #define TBI_POLLING_FLAGS (TBI_POLLING_INTR_FLAG | TBI_PURE_POLLING_FLAG)
- #define TBI_DO_PREEMPHASIS 0x8
-
- LM_UINT32 IgnoreTbiLinkChange;
-#endif
-#ifdef BCM_NAPI_RXPOLL
- volatile LM_UINT32 RxPoll;
-#endif
- char PartNo[24];
- char BootCodeVer[16];
- char IPMICodeVer[24];
- char BusSpeedStr[24];
-
- FLASHINFO flashinfo;
- LM_UINT8 flashbuffer[256];
-} LM_DEVICE_BLOCK;
-
-
-#define T3_REG_CPU_VIEW 0xc0000000
-
-#define T3_BLOCK_DMA_RD (1 << 0)
-#define T3_BLOCK_DMA_COMP (1 << 1)
-#define T3_BLOCK_RX_BD_INITIATOR (1 << 2)
-#define T3_BLOCK_RX_BD_COMP (1 << 3)
-#define T3_BLOCK_DMA_WR (1 << 4)
-#define T3_BLOCK_MSI_HANDLER (1 << 5)
-#define T3_BLOCK_RX_LIST_PLMT (1 << 6)
-#define T3_BLOCK_RX_LIST_SELECTOR (1 << 7)
-#define T3_BLOCK_RX_DATA_INITIATOR (1 << 8)
-#define T3_BLOCK_RX_DATA_COMP (1 << 9)
-#define T3_BLOCK_HOST_COALESING (1 << 10)
-#define T3_BLOCK_MAC_RX_ENGINE (1 << 11)
-#define T3_BLOCK_MBUF_CLUSTER_FREE (1 << 12)
-#define T3_BLOCK_SEND_BD_INITIATOR (1 << 13)
-#define T3_BLOCK_SEND_BD_COMP (1 << 14)
-#define T3_BLOCK_SEND_BD_SELECTOR (1 << 15)
-#define T3_BLOCK_SEND_DATA_INITIATOR (1 << 16)
-#define T3_BLOCK_SEND_DATA_COMP (1 << 17)
-#define T3_BLOCK_MAC_TX_ENGINE (1 << 18)
-#define T3_BLOCK_MEM_ARBITOR (1 << 19)
-#define T3_BLOCK_MBUF_MANAGER (1 << 20)
-#define T3_BLOCK_MAC_GLOBAL (1 << 21)
-
-#define LM_ENABLE 1
-#define LM_DISABLE 2
-
-#define RX_CPU_EVT_SW0 0
-#define RX_CPU_EVT_SW1 1
-#define RX_CPU_EVT_RLP 2
-#define RX_CPU_EVT_SW3 3
-#define RX_CPU_EVT_RLS 4
-#define RX_CPU_EVT_SW4 5
-#define RX_CPU_EVT_RX_BD_COMP 6
-#define RX_CPU_EVT_SW5 7
-#define RX_CPU_EVT_RDI 8
-#define RX_CPU_EVT_DMA_WR 9
-#define RX_CPU_EVT_DMA_RD 10
-#define RX_CPU_EVT_SWQ 11
-#define RX_CPU_EVT_SW6 12
-#define RX_CPU_EVT_RDC 13
-#define RX_CPU_EVT_SW7 14
-#define RX_CPU_EVT_HOST_COALES 15
-#define RX_CPU_EVT_SW8 16
-#define RX_CPU_EVT_HIGH_DMA_WR 17
-#define RX_CPU_EVT_HIGH_DMA_RD 18
-#define RX_CPU_EVT_SW9 19
-#define RX_CPU_EVT_DMA_ATTN 20
-#define RX_CPU_EVT_LOW_P_MBOX 21
-#define RX_CPU_EVT_HIGH_P_MBOX 22
-#define RX_CPU_EVT_SW10 23
-#define RX_CPU_EVT_TX_CPU_ATTN 24
-#define RX_CPU_EVT_MAC_ATTN 25
-#define RX_CPU_EVT_RX_CPU_ATTN 26
-#define RX_CPU_EVT_FLOW_ATTN 27
-#define RX_CPU_EVT_SW11 28
-#define RX_CPU_EVT_TIMER 29
-#define RX_CPU_EVT_SW12 30
-#define RX_CPU_EVT_SW13 31
-
-/* RX-CPU event */
-#define RX_CPU_EVENT_SW_EVENT0 (1 << RX_CPU_EVT_SW0)
-#define RX_CPU_EVENT_SW_EVENT1 (1 << RX_CPU_EVT_SW1)
-#define RX_CPU_EVENT_RLP (1 << RX_CPU_EVT_RLP)
-#define RX_CPU_EVENT_SW_EVENT3 (1 << RX_CPU_EVT_SW3)
-#define RX_CPU_EVENT_RLS (1 << RX_CPU_EVT_RLS)
-#define RX_CPU_EVENT_SW_EVENT4 (1 << RX_CPU_EVT_SW4)
-#define RX_CPU_EVENT_RX_BD_COMP (1 << RX_CPU_EVT_RX_BD_COMP)
-#define RX_CPU_EVENT_SW_EVENT5 (1 << RX_CPU_EVT_SW5)
-#define RX_CPU_EVENT_RDI (1 << RX_CPU_EVT_RDI)
-#define RX_CPU_EVENT_DMA_WR (1 << RX_CPU_EVT_DMA_WR)
-#define RX_CPU_EVENT_DMA_RD (1 << RX_CPU_EVT_DMA_RD)
-#define RX_CPU_EVENT_SWQ (1 << RX_CPU_EVT_SWQ)
-#define RX_CPU_EVENT_SW_EVENT6 (1 << RX_CPU_EVT_SW6)
-#define RX_CPU_EVENT_RDC (1 << RX_CPU_EVT_RDC)
-#define RX_CPU_EVENT_SW_EVENT7 (1 << RX_CPU_EVT_SW7)
-#define RX_CPU_EVENT_HOST_COALES (1 << RX_CPU_EVT_HOST_COALES)
-#define RX_CPU_EVENT_SW_EVENT8 (1 << RX_CPU_EVT_SW8)
-#define RX_CPU_EVENT_HIGH_DMA_WR (1 << RX_CPU_EVT_HIGH_DMA_WR)
-#define RX_CPU_EVENT_HIGH_DMA_RD (1 << RX_CPU_EVT_HIGH_DMA_RD)
-#define RX_CPU_EVENT_SW_EVENT9 (1 << RX_CPU_EVT_SW9)
-#define RX_CPU_EVENT_DMA_ATTN (1 << RX_CPU_EVT_DMA_ATTN)
-#define RX_CPU_EVENT_LOW_P_MBOX (1 << RX_CPU_EVT_LOW_P_MBOX)
-#define RX_CPU_EVENT_HIGH_P_MBOX (1 << RX_CPU_EVT_HIGH_P_MBOX)
-#define RX_CPU_EVENT_SW_EVENT10 (1 << RX_CPU_EVT_SW10)
-#define RX_CPU_EVENT_TX_CPU_ATTN (1 << RX_CPU_EVT_TX_CPU_ATTN)
-#define RX_CPU_EVENT_MAC_ATTN (1 << RX_CPU_EVT_MAC_ATTN)
-#define RX_CPU_EVENT_RX_CPU_ATTN (1 << RX_CPU_EVT_RX_CPU_ATTN)
-#define RX_CPU_EVENT_FLOW_ATTN (1 << RX_CPU_EVT_FLOW_ATTN)
-#define RX_CPU_EVENT_SW_EVENT11 (1 << RX_CPU_EVT_SW11)
-#define RX_CPU_EVENT_TIMER (1 << RX_CPU_EVT_TIMER)
-#define RX_CPU_EVENT_SW_EVENT12 (1 << RX_CPU_EVT_SW12)
-#define RX_CPU_EVENT_SW_EVENT13 (1 << RX_CPU_EVT_SW13)
-
-#define RX_CPU_MASK (RX_CPU_EVENT_SW_EVENT0 | \
- RX_CPU_EVENT_RLP | \
- RX_CPU_EVENT_RDI | \
- RX_CPU_EVENT_RDC)
-
-#define TX_CPU_EVT_SW0 0
-#define TX_CPU_EVT_SW1 1
-#define TX_CPU_EVT_SW2 2
-#define TX_CPU_EVT_SW3 3
-#define TX_CPU_EVT_TX_MAC 4
-#define TX_CPU_EVT_SW4 5
-#define TX_CPU_EVT_SBDC 6
-#define TX_CPU_EVT_SW5 7
-#define TX_CPU_EVT_SDI 8
-#define TX_CPU_EVT_DMA_WR 9
-#define TX_CPU_EVT_DMA_RD 10
-#define TX_CPU_EVT_SWQ 11
-#define TX_CPU_EVT_SW6 12
-#define TX_CPU_EVT_SDC 13
-#define TX_CPU_EVT_SW7 14
-#define TX_CPU_EVT_HOST_COALES 15
-#define TX_CPU_EVT_SW8 16
-#define TX_CPU_EVT_HIGH_DMA_WR 17
-#define TX_CPU_EVT_HIGH_DMA_RD 18
-#define TX_CPU_EVT_SW9 19
-#define TX_CPU_EVT_DMA_ATTN 20
-#define TX_CPU_EVT_LOW_P_MBOX 21
-#define TX_CPU_EVT_HIGH_P_MBOX 22
-#define TX_CPU_EVT_SW10 23
-#define TX_CPU_EVT_RX_CPU_ATTN 24
-#define TX_CPU_EVT_MAC_ATTN 25
-#define TX_CPU_EVT_TX_CPU_ATTN 26
-#define TX_CPU_EVT_FLOW_ATTN 27
-#define TX_CPU_EVT_SW11 28
-#define TX_CPU_EVT_TIMER 29
-#define TX_CPU_EVT_SW12 30
-#define TX_CPU_EVT_SW13 31
-
-
-/* TX-CPU event */
-#define TX_CPU_EVENT_SW_EVENT0 (1 << TX_CPU_EVT_SW0)
-#define TX_CPU_EVENT_SW_EVENT1 (1 << TX_CPU_EVT_SW1)
-#define TX_CPU_EVENT_SW_EVENT2 (1 << TX_CPU_EVT_SW2)
-#define TX_CPU_EVENT_SW_EVENT3 (1 << TX_CPU_EVT_SW3)
-#define TX_CPU_EVENT_TX_MAC (1 << TX_CPU_EVT_TX_MAC)
-#define TX_CPU_EVENT_SW_EVENT4 (1 << TX_CPU_EVT_SW4)
-#define TX_CPU_EVENT_SBDC (1 << TX_CPU_EVT_SBDC)
-#define TX_CPU_EVENT_SW_EVENT5 (1 << TX_CPU_EVT_SW5)
-#define TX_CPU_EVENT_SDI (1 << TX_CPU_EVT_SDI)
-#define TX_CPU_EVENT_DMA_WR (1 << TX_CPU_EVT_DMA_WR)
-#define TX_CPU_EVENT_DMA_RD (1 << TX_CPU_EVT_DMA_RD)
-#define TX_CPU_EVENT_SWQ (1 << TX_CPU_EVT_SWQ)
-#define TX_CPU_EVENT_SW_EVENT6 (1 << TX_CPU_EVT_SW6)
-#define TX_CPU_EVENT_SDC (1 << TX_CPU_EVT_SDC)
-#define TX_CPU_EVENT_SW_EVENT7 (1 << TX_CPU_EVT_SW7)
-#define TX_CPU_EVENT_HOST_COALES (1 << TX_CPU_EVT_HOST_COALES)
-#define TX_CPU_EVENT_SW_EVENT8 (1 << TX_CPU_EVT_SW8)
-#define TX_CPU_EVENT_HIGH_DMA_WR (1 << TX_CPU_EVT_HIGH_DMA_WR)
-#define TX_CPU_EVENT_HIGH_DMA_RD (1 << TX_CPU_EVT_HIGH_DMA_RD)
-#define TX_CPU_EVENT_SW_EVENT9 (1 << TX_CPU_EVT_SW9)
-#define TX_CPU_EVENT_DMA_ATTN (1 << TX_CPU_EVT_DMA_ATTN)
-#define TX_CPU_EVENT_LOW_P_MBOX (1 << TX_CPU_EVT_LOW_P_MBOX)
-#define TX_CPU_EVENT_HIGH_P_MBOX (1 << TX_CPU_EVT_HIGH_P_MBOX)
-#define TX_CPU_EVENT_SW_EVENT10 (1 << TX_CPU_EVT_SW10)
-#define TX_CPU_EVENT_RX_CPU_ATTN (1 << TX_CPU_EVT_RX_CPU_ATTN)
-#define TX_CPU_EVENT_MAC_ATTN (1 << TX_CPU_EVT_MAC_ATTN)
-#define TX_CPU_EVENT_TX_CPU_ATTN (1 << TX_CPU_EVT_TX_CPU_ATTN)
-#define TX_CPU_EVENT_FLOW_ATTN (1 << TX_CPU_EVT_FLOW_ATTN)
-#define TX_CPU_EVENT_SW_EVENT11 (1 << TX_CPU_EVT_SW11)
-#define TX_CPU_EVENT_TIMER (1 << TX_CPU_EVT_TIMER)
-#define TX_CPU_EVENT_SW_EVENT12 (1 << TX_CPU_EVT_SW12)
-#define TX_CPU_EVENT_SW_EVENT13 (1 << TX_CPU_EVT_SW13)
-
-
-#define TX_CPU_MASK (TX_CPU_EVENT_SW_EVENT0 | \
- TX_CPU_EVENT_SDI | \
- TX_CPU_EVENT_SDC)
-
-
-#define T3_FTQ_TYPE1_UNDERFLOW_BIT (1 << 29)
-#define T3_FTQ_TYPE1_PASS_BIT (1 << 30)
-#define T3_FTQ_TYPE1_SKIP_BIT (1 << 31)
-
-#define T3_FTQ_TYPE2_UNDERFLOW_BIT (1 << 13)
-#define T3_FTQ_TYPE2_PASS_BIT (1 << 14)
-#define T3_FTQ_TYPE2_SKIP_BIT (1 << 15)
-
-#define T3_QID_DMA_READ 1
-#define T3_QID_DMA_HIGH_PRI_READ 2
-#define T3_QID_DMA_COMP_DX 3
-#define T3_QID_SEND_BD_COMP 4
-#define T3_QID_SEND_DATA_INITIATOR 5
-#define T3_QID_DMA_WRITE 6
-#define T3_QID_DMA_HIGH_PRI_WRITE 7
-#define T3_QID_SW_TYPE_1 8
-#define T3_QID_SEND_DATA_COMP 9
-#define T3_QID_HOST_COALESCING 10
-#define T3_QID_MAC_TX 11
-#define T3_QID_MBUF_CLUSTER_FREE 12
-#define T3_QID_RX_BD_COMP 13
-#define T3_QID_RX_LIST_PLM 14
-#define T3_QID_RX_DATA_BD_INITIATOR 15
-#define T3_QID_RX_DATA_COMP 16
-#define T3_QID_SW_TYPE2 17
-
-LM_STATUS LM_LoadFirmware(PLM_DEVICE_BLOCK pDevice,
- PT3_FWIMG_INFO pFwImg,
- LM_UINT32 LoadCpu,
- LM_UINT32 StartCpu);
-
-/******************************************************************************/
-/* NIC register read/write macros. */
-/******************************************************************************/
-
-/* MAC register access. */
-LM_UINT32 LM_RegRd(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register);
-
-LM_VOID LM_RegRdBack(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register);
-
-LM_VOID LM_RegWr(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register,
- LM_UINT32 Value32, LM_UINT32 ReadBack);
-
-LM_UINT32 LM_RegRdInd(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register);
-LM_VOID LM_RegWrInd(PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register,
- LM_UINT32 Value32);
-
-/* MAC memory access. */
-LM_UINT32 LM_MemRdInd(PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr);
-
-LM_VOID LM_MemWrInd(PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr,
- LM_UINT32 Value32);
-
-#define MB_REG_WR(pDevice, OffsetName, Value32) \
- ((pDevice)->Flags & UNDI_FIX_FLAG) ? \
- LM_RegWrInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)+0x5600, \
- Value32) : \
- (void) MM_MEMWRITEL(&((pDevice)->pMemView->OffsetName), Value32)
-
-#define MB_REG_RD(pDevice, OffsetName) \
- (((pDevice)->Flags & UNDI_FIX_FLAG) ? \
- LM_RegRdInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)+0x5600) : \
- MM_MEMREADL(&((pDevice)->pMemView->OffsetName)))
-
-#define REG_RD(pDevice, OffsetName) \
- LM_RegRd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName))
-
-#define REG_RD_BACK(pDevice, OffsetName) \
- LM_RegRdBack(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName))
-
-#define REG_WR(pDevice, OffsetName, Value32) \
- LM_RegWr(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName), Value32, TRUE)
-
-#define RAW_REG_WR(pDevice, OffsetName, Value32) \
- LM_RegWr(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName), Value32, FALSE)
-
-#define REG_RD_OFFSET(pDevice, Offset) \
- MM_MEMREADL(((LM_UINT8 *) (pDevice)->pMemView + Offset))
-
-#define REG_WR_OFFSET(pDevice, Offset, Value32) \
- MM_MEMWRITEL(((LM_UINT8 *) (pDevice)->pMemView + Offset), Value32)
-
-#define MEM_RD(pDevice, AddrName) \
- LM_MemRdInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName))
-#define MEM_WR(pDevice, AddrName, Value32) \
- LM_MemWrInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName), Value32)
-
-#define MEM_RD_OFFSET(pDevice, Offset) \
- LM_MemRdInd(pDevice, Offset)
-#define MEM_WR_OFFSET(pDevice, Offset, Value32) \
- LM_MemWrInd(pDevice, Offset, Value32)
-
-
-#endif /* TIGON3_H */
-
projects / openwrt / staging / chunkeey.git / commitdiff